wifi for pi
TRANSCRIPT
-
7/29/2019 wifi for pi
1/6
2012
Author: Praveen Kumar
Wi-Fi for Pi
-
7/29/2019 wifi for pi
2/6
# 9/3, 2nd floor, Sree Laksmi Complex, opp, to Vivekananda Park, Girinagar, Bangalore - 560085,
Email: [email protected], Phone: 080 - 26722726
Introduction:
The Raspberry Pi has many great features straight out of the box, unfortunately Wi-Fi is not one of them,
in this guide Ill show you how I Wi-Fi equipped my Raspberry PI.One of the first things that you will want
to do is to get your Raspberry Pi connected up to the Internet. In this lesson, you will learn how to:
Use a Wi-Fi adapter with both Raspbian
Find out the IP address of your Raspberry Pi
Prerequisites
Raspberry Pi 512 MB
USB cable
8SD card class 4
WI-FI module
Putty (or) VNC viewer (or) DVI port monitor
Wi-Fi module:
Step 1:
Boot the Raspberry Pi without the Wi-Fi adapter plugged in.
Step 2:
Open a Terminal session by clicking on the LX Terminal icon, and enter the following command
into it:
sudo nano /etc/network/interfaces
-
7/29/2019 wifi for pi
3/6
# 9/3, 2nd floor, Sree Laksmi Complex, opp, to Vivekananda Park, Girinagar, Bangalore - 560085,
Email: [email protected], Phone: 080 - 26722726
Step 3:
This opens an editor screen of the Wi-Fi configuration file you need to change.
http://learn.adafruit.com/assets/2929http://learn.adafruit.com/assets/2929 -
7/29/2019 wifi for pi
4/6
# 9/3, 2nd floor, Sree Laksmi Complex, opp, to Vivekananda Park, Girinagar, Bangalore - 560085,
Email: [email protected], Phone: 080 - 26722726
Change the SSID name and Password
Step 4:
Restart the system and the connect the Wi-Fi
Step 5:
You can find the IP address of your computer, either by opening the Wi-Fi setup tool again. The IP
address will appear at the bottom of the Window. Open up a LX Terminal window and type the
following command:
sudo ifconfig
auto lo
iface lo inet loopback
iface eth0 inet dhcp
allow-hotplug wlan0
auto wlan0
.iface wlan0 inet dhcp
. wpa-ssid "ssid"
. wpa-psk "password"
-
7/29/2019 wifi for pi
5/6
# 9/3, 2nd floor, Sree Laksmi Complex, opp, to Vivekananda Park, Girinagar, Bangalore - 560085,
Email: [email protected], Phone: 080 - 26722726
(If you having monitor to view the GUI then you can go with following alternate
method)
Step 6:
Insert a Wi-Fi module and click the Wi-Fi icon which is in Desktop
Step 7:
After inserting Wi-Fi module click the connect thats it Wi-Fi activated in your pi.
-
7/29/2019 wifi for pi
6/6
# 9/3, 2nd floor, Sree Laksmi Complex, opp, to Vivekananda Park, Girinagar, Bangalore - 560085,
Email: [email protected], Phone: 080 - 26722726
Step 8:
Now you can use your pi with an Wi-Fi module.
Links:
Raspberry Pi-http://www.tenettech.com/product/2184/tenet-technetronicsraspberry-pi
Wi-Fi for Pi -http://www.tenettech.com/product/2719/wifi-for-raspberry-pi
http://www.tenettech.com/product/2184/tenet-technetronicsraspberry-pihttp://www.tenettech.com/product/2184/tenet-technetronicsraspberry-pihttp://www.tenettech.com/product/2184/tenet-technetronicsraspberry-pihttp://www.tenettech.com/product/2719/wifi-for-raspberry-pihttp://www.tenettech.com/product/2719/wifi-for-raspberry-pihttp://www.tenettech.com/product/2719/wifi-for-raspberry-pimailto:[email protected]:[email protected]:[email protected]:[email protected]://www.tenettech.com/product/2719/wifi-for-raspberry-pihttp://www.tenettech.com/product/2184/tenet-technetronicsraspberry-pi