Why the JohnDeere RemanStarter?

Why the John Deere Reman Starter?

Designed to meet customer demands

Provide customer a low-cost repair alternative Typically 60%-70% the cost of new

All units meet or exceed John Deere original specifications

Factory backed warranty of 1 year/unlimited hours if dealerinstalled

Remanufactured, NOT Rebuilt

| Insert Presentation Title in View>Master, View>Header & Footer | Month Day, YEAR2

Reasons to purchase a John DeereStarter

| Insert Presentation Title in View>Master, View>Header & Footer | Month Day, YEAR3

Packaging

| Insert Presentation Title in View>Master, View>Header & Footer | Month Day, YEAR4

John Deere Reman foampackaging fully protects unitduring shipment.

This extra protection couldpotentially reduce downtime.

Safety kit included.

Check to make sure your productis properly packaged to protectit from damage during shipment

Barrel Insulation

| Insert Presentation Title in View>Master, View>Header & Footer | Month Day, YEAR5

John Deere Reman barrelassembly is coated with paintinside to protect against rust.

If barrel is not protected with arust inhibitor, this can eat away atthe installation over time causingfailure of the unit.

Check to make sure your productis properly coated to protectfrom rust.

Barrel Assembly Pole Shoes

| Insert Presentation Title in View>Master, View>Header & Footer | Month Day, YEAR6

John Deere Reman pole shoesare coated with a rust preventer.

A rust protector will protect froman electrical short in the unit.

Check to make sure your poleshoe is properly coated toprotect from rust.

Application Specific Jump Start Protection for

| Insert Presentation Title in View>Master, View>Header & Footer | Month Day, YEAR7

John Deere Reman unit hassafety cover that fully protectsagainst jump starting.

All starters come with jump startsafety kit to protect frompotential injury.

Check to make sure your productis equipped with proper safetycovers and instructions.

Starter Brushes

| Insert Presentation Title in View>Master, View>Header & Footer | Month Day, YEAR8

John Deere Reman starterbrushes are properly seated toensure proper contact witharmature commutator.

Starter will be low on powerwhich could result in a slow or nostart situation.

Check to make sure yourbrushes are properly seated.

Properly Clocked

| Insert Presentation Title in View>Master, View>Header & Footer | Month Day, YEAR9

John Deere Reman starters areproperly clocked, per application.

This will decrease installationand downtime.

Check to make sure your starteris properly clocked to minimizeinstallation time as well machinedowntime.

Solenoid

| Insert Presentation Title in View>Master, View>Header & Footer | Month Day, YEAR10

John Deere Reman solenoids areremanuactured 100% to OEMspecifications.

This ensures product integrity

Check to make sure your startersolenoid are new whencomparing to John DeereReman.

Armature Shaft

| Insert Presentation Title in View>Master, View>Header & Footer | Month Day, YEAR11

John Deere Reman armatureshafts are balanced andstraightened to allow starter driveto engage fully.

If drive does not engage fully itcould result in a prematurefailure.

Check to make sure your startersolenoid are new whencomparing to John DeereReman.

John Deere Reman Starter Summary

Remanufactured not rebuilt

Completely disassembled

100% replacement of worn parts

Armatures are balanced 100%

Each unit is tested for amperage and torque load

All units meet or exceed John Deere Specifications

All John Deere Reman starters carry a 1 year/unlimited hours parts and laborwarranty if dealer installed.

| Insert Presentation Title in View>Master, View>Header & Footer | Month Day, YEAR12

| Insert Presentation Title in View>Master, View>Header & Footer | Month Day, YEAR13