whole goods price list - yetterco.com

Whole goods Price List

Prices effective October 11th, 2021

Yetter Manufacturing Company Inc.

Founded 1930

Colchester, IL 62326-0358

309/776-4111

Toll Free: 800/447-5777

Fax: 309/776-3222

Visit our web site at: http://www.yetterco.com/

PRICES SUBJECT TO CHANGE WITHOUT NOTICE OR

OBLIGATION

NOTE: In this Price Guide, product weights, listed under the columns Est. Wt. are estimated.

F.O.B. Colchester, IL / Macomb, IL

Yetter Performance Guarantee During the first 30 days, should the Yetter product you buy fail to perform, and after being given a reasonable amount of time to

remedy the situation, the company will, if unable to make the product perform:

Repair It, Replace It, or Buy It Back!

Your One Stop Solutions Center

Table of Contents by page number Table of Contents by product code 1000 Series Auger Ace 3 1000 Series Auger Ace 3

1200 Series LIDLIFT™ 3 1200 Series LIDLIFT™ 3

2000 Series All Steer 4 2000 Series All Steer 4

2920 Series Disc Sealers and Max Sealers 5 NH3 Residue Manager 7

2930/2950 Series Disc Chisel Coulter 6 2920 Series Disc Sealers and Max Sealers 5

2967 Series Frame Mount Residue Managers 7 2930/2950 Series Disc Chisel Coulters 6

NH3 Residue Manager 7 2940 Series Air Adjust Residue Manager 17-23

2960 Series Unit Mount Conservation Coulter 8 2959 Series Planter Unit Mount Fertilizer Injector 10

2967 Series Residue Manager for 2960 Series II Coulter 8 2960 Series Unit Mount Conservation Coulter 8-9

2960 Series Ultra Narrow Coulter 9 2960 Series Ultra Narrow Coulter 9

2959 Series Planter Unit Mount Fertilizer Injector 10 2960/2967 Residue Manager Combo for JD Twin Row 11

2962 Series Double Disc Fertilizer Opener 10 2962 Series Double Disc Fertilizer Opener 10

2966 Series Residue Manager for JD 60/90 11 2966 Series Residue Manager for JD 60/90 Opener 11

2960/2967 Residue Manager Combo for JD Twin Row 11 2967 Series Residue Manager for Twin Row 11-12

2967 Series Residue Manager for Twin Row 11-12 2967 Series Residue Manager for 2960 Series II Coulter 8

2967 Series Residue Manager 12 2967 Series Frame Mount Residue Managers 7

2967 Series Screw Adjust Residue Manager and Narrow Row 13 2967 Series Floating Residue Manager for Kinze Coulter 14

2967 Series Short Floating Residue Manager 14 2967 Series Residue Manager 12

2967 Series Floating Residue Manager for Kinze coulter 14 2967 Series Floating Residue Manager for Unit Mount Coulters 15

2967 Series Floating Residue Manager for JD coulter 15 2967 Series Screw Adjust Residue Manager and Narrow Row 13

2967 Series Floating Residue Manager for Unit Mount Coulters 15 2967 Series Floating Residue Manager for JD coulter 15

2967 Series Floating Residue Manager for 2960-033/-034 16 2967 Series Floating Residue Manager for 2960-033/-034 16

2940 Series Air Adjust Residue Manager 17-23 2967 Series Short Floating Residue Manager 14

2968 Series Row-Unit Mount In-Between Fertilizer Opener 24 2968 Series Row-Unit Mount In-Between Fertilizer Opener 24

2969 Series IntelliNject™ 25 2969 Series IntelliNject™ 25

2982 Series Vertical Tillage Attachment 26 2982 Series Vertical Tillage Attachment 26

Extension Brackets and Front Bar Mount Kits 26 2984 Series Maverick™ HR Plus Opener 27

2984 Series Maverick™ HR Plus Opener 27 2984 Series Rolling Basket 27

2984 Series Rolling Basket 27 2984 Series Strip Freshener™ 28

2984 Series Strip Freshener™ 27 2984 Strip Freshener CC 29

2986 Series Avenger® Coulter 28 2986 Series Avenger® Coulter 28

2984 Strip Freshener CC 29 Extension Brackets and Front Bar Mount Kits 26

2995 / 2996 Series Fertilizer Coulters 30 2995 / 2996 Series Fertilizer Coulters 30

Generation III Coulter 31 2995 Xtreme™ (XFC)Fertilizer and (XCC)Cutting Coulter 32

Options for Fertilizer Coulters 31 Options for Fertilizer Coulters 31

6200 N Keeper Closing Wheel for 2995/2996/ Gen III 31 Generation III Coulter 31

2999 Series Frame Mounted Spring Cushioned Coulters 33 2999 Series Frame Mounted Spring Cushioned Coulters 33

2995 Xtreme™ (XFC)Fertilizer and (XCC)Cutting Coulter 32 3400 and 3400-MT Series Toolbar Rotary Hoes 34

3400 and 3400-MT Series Toolbar Rotary Hoes 34 3500 and 3500-MT Series Toolbar Rotary Hoes 35

3500 and 3500-MT Series Toolbar Rotary Hoes 35 3650 & 3660 Pull Type Series Toolbar Rotary Hoes 36

3560 & 3660 Pull Type Rotary Hoe 36 3700 Series Ridge Till Rotary Hoes 37

3700 Series Ridge Till Rotary Hoes 37 3800 Series Heavy-duty Double Bar Folding Toolbar 38

3800 Series Heavy-duty Double Bar Folding Toolbar 38 3800 Series Heavy-duty Single Bar Folding Toolbar 38

3800 Series Heavy-duty Single Bar Folding Toolbar 38 4000 Series Nutrient Pro Coulter 39

4000 Series Nutrient Pro Coulter 39 5000 Series Corn Stalk Devastator™ 40-42

5000 Series Corn Stalk Devastator™ 40-42 6000 Series Serrated Closing Disc 43

6000 Series Serrated Closing Disc 43 6150 Series Hydraulic Flat Fold Markers 45

6200 Series Firming Wheel 44 6200 Series Firming Wheel 44

6200 Series Closing Wheels (Cast/Spike/Rubber) 43 6200 Series Closing Wheels (Cast/Spike/Rubber) 43

6200 Series Interchanger 44 6200 Series Paddle Wheel 43

6200 Series Paddle Wheel 43 6200 Interchanger 44

6200 Poly Spike Closing Wheel 43 6200 Series Drag Chain 44

6200 Series Drag Chain 44 Spoke Planter Gauge Wheel 44

Spoke Planter Gauge Wheel 44 6200 Series N Keeper closing wheel for 2995/2996/Gen III 31

6150 Series Hydraulic Flat Fold Markers 45 6200 Series Poly Spike Closing Wheel 40

6300 Series Coulter Cart 46 6300 Series Coulter Cart 46

71 Series Planter Unit 47 71 Series Planter Unit 47

8500 Series Head Cart Trailer 48 8500 Series Head Cart Trailers 48

9010 Series TrackTill® 49-50 9010 Series TrackTill® 49-50

10,000 Series Magnum™ 51 10000 Series Magnum 51

Warranty Yetter Manufacturing Company warrants its own products only and cannot be responsible for damage to equipment on which mounted. Due to a constant program of product improvement,

Yetter Manufacturing Company reserves the right to alter specifications without notice or obligation. Various products featured in the catalog are either patented or have patents applied for.

THE ACE IN THE HOLE FOR AUGER CONTROL

STANDARD FEATURES FOR ALL MODELS

• Universal mounting brackets for grain and fertilizer augers/conveyors

• Hydraulic cylinder allows for quick and easy side- to-side leveling of auger tube in relation to the storage container or bin intake hole from tractor seat

• Save time centering auger or conveyor with push of lever

Model No. Description Est. Wt. List Price

1000-004 Auger Ace 4 Bolt Hub kit with Universal mount rectangular and sq tube 185 lbs $ 1,345.00

1000-005 Auger Ace 5 Bolt Hub kit with Universal mount rectangular and sq tube 166 lbs $ 1,275.00

1000-006 Auger Ace 6 Bolt Hub Kit with Universal mount rectangular and sq tube 172 lbs $ 1,345.00


1000-105 Rail Mount hardware to mount to - Round tube 3” 2 lbs $105.00

1000-106 Rail Mount hardware to mount to - Round tube 4” 2 lbs $ 120.00

1000-107 Rail Mount hardware to mount to – Round tube 2-1/2” 2 lbs $ 95.00


• Saves time and makes filling or checking seed levels in boxes easier

• Fits most planter models with individual boxes

• Quick and easy installation; mounts to front back or side

• Quick release latch for row meter service

• Latching mechanism locks lid down

• Requires small air compressor or plumb into existing compressor Order from A, B

Section A: Model No. Description Est. Wt. List Price

1200-010 LIDLIFT™ (requires 1 per row) 25 lbs $ 225.00

Section B: Model No. Description Est. Wt. List Price

1200-021 Open/Close valve, fittings and hose kit, up through 24 row lbs $ 235.00

For planters larger than 24 rows order: 1200-147 Package of 10 tees for ¼ line .50 lbs $ 15.00

1200-337 Black tubing (¼)100’ roll $ 67.00


1200-020 Air compressor kit lbs $ 1,140.00

1200-030 Latch kit (requires 1 per row) lbs $ 50.00

1000 Series

• Order manual: 2565-787

Optional Equipment

1200 Series

3

Optional Equipment



• All Wheel-Steer • Heavy duty 8 bolt hubs

• 1600 gallon or 2000 gallon tank • 24,000 lbs load capacity

• Warning lights • 3” spindles

Order one each from Section A and B:

Section A Order One Model No.


2000-001-Black 1600 Gallon All Steer, black (with 1600 gallon single tank) 2700 lbs $ 14,400.00

2000-001-Green 1600 Gallon All Steer, green (with 1600 gallon single tank) 2700 lbs $ 14,400.00

Model No. Description Est. Wt List Price

2000-015-Black 2000 Gallon Dual Tank All Steer, black (with 1600 & 400 gallon tank) 2900 lbs $ 16,200.00

2000-015-Green 2000 Gallon Dual Tank All Steer, green (with 1600 & 400 gallon tank) 2900 lbs $ 16,200.00


2000-002-Black 1600 Gallon All Steer less tank, black 2300 lbs $ 11,450.00

2000-002-Green 1600 Gallon All Steer less tank, Green 2300 lbs $ 11,450.00


2000-016-Black 2000 Gallon Dual All Steer less tank, black 2400 lbs $ 12,450.00

2000-016-Green 2000 Gallon Dual All Steer less tank, green 2400 lbs $ 12,450.00


2000-003-Black 1600 Gallon All Steer less tank & saddle, black 2100 lbs $ 9,700.00

2000-003-Green 1600 Gallon All Steer less tank & saddle, green 2100 lbs $ 9,700.00

Section B Order One Model No.


2000-039 18.4 x 26.10 tire/wheel (1.38 inset), white 1400 lbs $ 7,550.00

Optional Spacer Kits Est. Wt. List Price

2000-022 All Steer Axle Spacer Kit, 38” 250 lbs $ 1,900.00



**Note: To pull All Steer from factory requires an assembly charge – consult sales department for details.

2000 Series All Steer Fertilizer Cart

4



• Spring cushioned blades with adjustable pressure

• Adjustable blade angle on disc sealer

• 16” Smooth or Notched, 4” x 16” planter type gauge wheels


2920-016A Anhydrous blade sealer. Fits standard 1-1/4” and 1” x 2” Anhydrous shanks. 16” blades

68 lbs $ 375.00

2920-016A-N Anhydrous blade sealer. Fits standard 1-1/4” and 1” x 2” Anhydrous shanks. 16” notched blades

68 lbs $ 375.00

2920-016A-ST Anhydrous blade sealer. Fits same as –016A with ^Sharktooth Wheel 69 lbs $ 410.00

2920-020 Anhydrous wheel sealer. Fits standard 1-1/4” and 1” x 2” Anhydrous shanks. 40 mm bearings. 4” x 16” planter type gauge wheels

71 lbs $ 470.00

* Other blade options available, contact Yetter Sales Department.


• Arms operate independently

• Adjustable blade pitch

• Fits the following universal shanks: 1” X 2”shank

1.25” sq. coil shank 2” x 1.25” shank

• Heavy duty bearing hub

Model No. Description Est Wt List Price

2920-051 Max Sealer Plus, 18” Notch - universal 87 lbs $ 535.00

2920-053 Max Sealer Plus, Sharktooth wheel - universal 85 lbs $ 535.00

2920 Series Max Sealer Plus

Notch blade *Shark tooth

wheel

5


2920 Series Sealers


STANDARD FEATURES FOR ALL MODELS Sealed tapered roller bearings (pre-lubricated) 1-1/2” forged offset or straight shank available in different lengths Spring cushioned to reduce damage from obstructions 17” or 20” ripple blade Mounts are available for different bar sizes

# Other clamp kits available – call sales department for details.

^Order blade, shank and clamp kit from page 26.

Optional Equipment:

2910-114* Spring Cushioned liquid injector kit Manual 2565-391

14 lbs $ 120.00

2910-137* High Clearance injector kit 23 lbs $ 110.00

2910-147-LH Gen III Coulter High Clearance Injection kit, LH 2 lbs $ 55.00

2910-147-RH Gen III Coulter High Clearance Injection kit, RH 2 lbs $ 55.00

*Also fits 2999 coulter assemblies


• Designed to perform one pass replanting

• Mounts to planter row units or existing planter attachments

• Depth is adjustable to work with planting depth and field conditions

• Pin adjust, Air Adjust or Screw Adjust models available

• Removes existing plants while placing new seed

• Saves time, equipment and fuel expenses

• Link to the ReSweep™ Flyer

Model No. Description Blade Style Est. Wt. List Price

2930-017# Straight Shank Disc-Chisel Coulter (4x4 & 4x6) 17” Ripple Blade 81 lbs $ 430.00

2930-020# Straight Shank Disc-Chisel Coulter (4x4 & 4x6) 20” Ripple Blade 87 lbs $ 440.00

2931-020# Straight Shank Disc-Chisel Coulter (7x7) 20” Ripple Blade 87 lbs $ 440.00

2950-017# Offset Shank Disc-Chisel Coulter (4x4 & 4x6) 17” Ripple Blade 84 lbs $ 460.00

2950-020# Offset Shank Disc-Chisel Coulter (4x4 & 4x6) 20” Ripple Blade 90 lbs $ 470.00

2910-130-HD^ 2910 Heavy Duty Disc-Chisel Coulter See note below 95 lbs $ 320.00


2965-028 Universal Unit Mounted ReSweep™ lbs $ 125.00

2965-028-LA Universal Unit Mounted ReSweep™, Long arm lbs $ 125.00

2965-040 Air Adjust ReSweep™ shank only kit lbs $ 80.00

2965-052 Screw Adjust ReSweep™ lbs $ 165.00

2965-053 Screw Adjust ReSweep™ for CNH lbs $ 165.00

2965-057 Screw Adjust ReSweep™ long arm lbs $ 165.00

2930/2950 Series Disc-Chisel Coulters

• Order manual: 2565-184 & 2565-185

2910-130-HD - 2565-743

2910-114 2910-137

6

• Order manual: 2910-114 - 2565-391

2910-137 - 2565-760

2965 Series ReSweep™ New


• Adjustable mounting bracket height

• Mounts on 2 ½” sq., 3” sq., 4” sq., 5” sq., 7” sq. • Lock down or float capabilities

5” x 7”, 4” x 6”, 3” dia. and 3 ½” dia. Toolbars • Row cleaner for toolbars

• Wheel options: Tapered tooth; -ST Sharktooth® wheel; - BW Bevel Wheel

Section A

Section B

2996-120 2 ½” U-bolt kit 3 lbs $ 30.00

2996-121 4” x 4” U-bolt kit 3 lbs $ 30.00

2996-123 7” x 7” U-bolt kit 3 lbs $ 30.00

2996-124 5” x 7” U-bolt kit 3 lbs $ 30.00

2996-126 3 ½” Diamond U-bolt kit 15 lbs $ 90.00

2996-127 3” x 3” U-bolt kit 3 lbs $ 30.00


• Row cleaner for toolbar shanks

• Lock down or float capacity

• Wheel options: Tapered tooth; -ST Sharktooth® wheel; - BW Bevel Wheel Model No. Description Est. Wt. List Price Floater Wheels

All Wheels -FW

2967-033A Universal Residue Manager kit 75 lbs. $ 670.00 $ 745.00

2967-038A Residue Manager for DMI HCS shank 78 lbs. $ 650.00 $ 725.00

Bracket Only - to mount on shank need to order Face plate mount planter attachments (Page 14)

2967-032 Universal Residue Manager Mount - for JD ME Row unit attachments

22 lbs. $ 170.00

Bracket Only – need to order Row Cleaner (Page 14)

*2966-095 Mount Brackets – JD 2510S Strip-till Applicator 91 lbs. $ 200.00

*2966-095A Mount Brackets – JD 2510S Strip-till Applicator 91 lbs. $ 200.00

*2510S Machines with serial # (-2000) will likely have shank mount bracket #AN235468, this shank bracket is compatible with the 2966-095A mount kit. 2510S Machines with serial # (2001-) with shank mount brackets #AN236245 or #AN236246 are compatible with the 2966-095 mount kit

Model No. Description Est.

Wt.

List Price All Wheels

Floater Wheel - FW

2967-039A Frame mount Titan floating residue manager 59 lbs $ 725.00 $ 800.00

2967 Series Frame Mount Floating Residue Manager


2967 Series Residue Managers


7

Optional Mounts - Residue Managers





• Row unit mounted coulter

• Adjustable depth setting for blade

• 16” blades available: 25 Multi-wave, Ripple, Smooth, 13 Shallow-wave or 8 Wave

• Optional row cleaner can be added (see below)

Section A - Includes Unit Mount Coulter Only (Order spring kit from Section E)


2960-127-MW Unit Mounted Coulter Fits Yetter 6000, JD 1700, 7000,

7100, 7200, 7300, Kinze, White 6100 and 9000 16” Multi (25) 42 lbs. $ 310.00

2960-127-R Fits same as 2960-127 16” Ripple 45 lbs. $ 310.00

2960-127-S Fits same as 2960-127 16” Smooth 42 lbs. $ 310.00

2960-127-SW Fits same as 2960-127 16” Shallow (13) 42 lbs. $ 310.00

2960-127-W Fits same as 2960-127 16” Wave (8) 42 lbs. $ 310.00

Section B

2960-134-MW Unit Mount Coulter Fits White 8000 16” Multi (25) 45 lbs. $ 320.00

2960-134-R Fits same as 2960-134 16” Ripple 45 lbs. $ 320.00

2960-134-S Fits same as 2960-134 16” Smooth 45 lbs. $ 320.00

2960-134-SW Fits same as 2960-134 16” Shallow (13) 45 lbs. $ 320.00

2960-134-W Fits same as 2960-134 16” Wave (8) 45 lbs. $ 320.00

Section C - Unit Mounted Coulter Only for CNH Planters (Less spring kit)

2960-020-MW* Fits Case IH 800-900,950,955,1200, 1250 (less spring kit) 14-5/8” Multi(25) 36 lbs. $ 340.00

* Will not fit Case IH/ 800-900 Horizontal Fold Planter unless 2 rows of the unit mounted attachments are removed before transporting. Will not fit first year production of Case IH 800 unless the Case/IH mount plate is modified. Section D - Unit Mounted Coulter Only for Monosem Planters

2960-039-MW Unit Mount Coulter - Fits Monosem (less spring kit) 14-5/8” Multi(25) 40 lbs. $ 340.00

Section E – Heavy Duty Spring Kit only

2960-126** Heavy-duty Spring Kit Fits Yetter 6000, JD 1700, 7000, 7100, 7200,7300, Kinze

N/A 31 lbs. $ 225.00

** Spring kit will not fit Kinze planters with cast lugs on the parallel arms.


• Row cleaner for 2960 Series II coulter


• Achieves coulter tillage and residue management

• Optional 2967-070 Quick Adjust


Model Description Est Wt List Price Floater Wheel All Wheels -FW

2967-115A Residue Manager attachment for use with: 2960-127/2960-134 Series Unit Mounted Coulter

42 lbs. $ 450.00 $ 525.00

Optional Equipment:

2967-070 Quick Adjust for 2967-115 to allow row cleaner to float 4 lbs. $ 90.00

2960 Series II Unit Mounted Conservation Coulter

2967 Series Residue Manager Attachments


8





• 16” blades available: 25 Multi-wave, Ripple, Smooth, 13 Shallow-wave or 8 Wave

• Optional row cleaner can be added (see page 16)


2960-033-MW Universal Coulter with mount for Floating Residue Manager

Attachment for Kinze 2000/3000/4900, JD 7000/7100 and Yetter

16” Multi (25) 48 lbs $ 310.00

2960-033-R Fits same planters as 2960-033 16” Ripple 48 lbs $ 310.00

2960-033-S Fits same planters as 2960-033 16” Smooth 48 lbs $ 310.00

2960-033-SW Fits same planters as 2960-033 16” Shallow (13) 48 lbs $ 310.00

2960-033-W Fits same planters as 2960-033 16” Wavy (8) 48 lbs $ 310.00

2960-034-MW Universal Coulter with mount for Floating Residue Manager Attachment for JD MEII/MEII+/ME XP/White 9000, Harvest Int’l Laser Pro 1, Laser Pro 1-N w/ Adapter from Harvest and Case IH 2000 w/ Adapter #

16” Multi (25) 48 lbs $ 310.00

2960-034-R Fits same planters as 2960-034 16” Ripple 48 lbs $ 310.00

2960-034-S Fits same planters as 2960-034 16” Smooth 48 lbs $ 310.00

2960-034-SW Fits same planters as 2960-034 16” Shallow (13) 48 lbs $ 310.00

2960-034-W Fits same planters as 2960-034 16” Wavy (8) 48 lbs $ 310.00

2960-041-MW Univ. Coulter with mount for Floating Residue Manager for WHITE 8000

16” Multi (25) 39 lbs $ 310.00

2960-041-R Fits WHITE 8000 16” Ripple 39 lbs $ 310.00

2960-041-S Fits WHITE 8000 16” Smooth 39 lbs $ 310.00

2960-041-SW Fits WHITE 8000 16” Shallow (13) 39 lbs $ 310.00

2960-041-W Fits WHITE 8000 16” Wavy (8) 39 lbs $ 310.00

Optional Equipment:

#2966-097 Case Adapter, RC Mount kit on 2000 Series for 2960-034 9 lbs. $ 50.00

2960 Series Unit Mount Coulter with brackets for Floating Residue Manager

9

8






• 16” blade: Ripple or 25 Multi-wave

• Injects fertilizer 2” off the row


• Optional row cleaner can be added (see below) Model No. Description Est. Wt. List Price

2959-003 Unit Mounted Fertilizer Inj. Coulter to fit Yetter 6000, JD 1700, 7000, 7100, 7200, 7300, Kinze and White 6000. 16” Ripple

43 lbs. $ 365.00

2959-003-MW Unit Mounted Fertilizer Inj. Coulter to fit Yetter 6000, JD 1700, 7000, 7100, 7200, 7300, Kinze and White 6000. 16” 25 Wave

43 lbs. $ 365.00

2959-104 2959 Spring injection add on kit 4 lbs. $ 80.00

Floating Residue Manger with Quick Adjust for 2959 Order Optional 2959-107 mount brackets to adjust from cab with Precision Planting CleanSweep®

• Wheel options: Tapered tooth; -ST Sharktooth®; -BW Bevel Wheel

List Price -FW

Est Wt All Wheels Floater Wheel

2967-180B Residue Manager Attachment for 2959 Coulter 48 lbs. $ 495.00 $ 570.00

2959-107 Air Cylinder Conversion Kit; to raise & lower with Precision Planting CleanSweep® $ 70.00


• 13.5” notched blade with 12.5 smooth blade opens slot for fertilizer

• 3/8” Liquid tube

• 1-1/2” Dry tube

• Optional row cleaner can be added (see below)


Fits Yetter 6000, JD 1700, 7000,7100,7200,7300, Kinze, New Idea and White 6100, 9000

LIQUID

Model Description Est. Wt. List Price

2962-003A LH Row Mount Double Disc Fertilizer assy with smooth/notch blade 29 lbs. $ 680.00

2962-004A RH Row Mount Double Disc Fertilizer assy with smooth/notch blade 29 lbs. $ 680.00

DRY


2962-010A RH Row Mount Double Disc Fertilizer assy with smooth/notch blade 29 lbs. $ 715.00

2962-011A LH Row Mount Double Disc Fertilizer assy with smooth/notch blade 29 lbs. $ 715.00

Model Description Est Wt List Price -FW All Wheels Floater Wheel

2962-005B Screw adjust Residue Manager attachment for the 2962 47 lbs. $ 495.00 $ 570.00

2962-108 Air Cylinder Conversion Kit; to raise & lower with Precision Planting CleanSweep® $ 80.00

2962 Series Row Mount Double Disc Fertilizer Coulter

2959 Series Planter Unit Mounted Fertilizer Injector


10

2962 Series Screw Adjust Residue Manager

Optional 2959 Series Floating Residue Manager


• Spring loaded row cleaner

• Lift chain to raise and lower

• Left and Right hand models

• Moves residue in front of blade and seed boot to reduce hair pinning and clear area; this warms soils more quickly and leads to improved emergence

• Wheel options: Tapered tooth; -ST for Sharktooth®; -BW for Bevel Wheel



• Air adjust Row Cleaner

• Make adjustments to up and down pressure with cab controller

• Left and Right hand models

• Moves residue in front of blade and seed boot to reduce hair pinning and clear area; this warms soils more quickly and leads to improved emergence

• Wheel options: Taper tooth; -ST for Sharktooth®; -BW for Bevel Wheel


Contact Yetter Sales Department @ 800-447-5777 for pricing and part numbers to order for the Pneumatic 2940 Air Adjust System from pages 20-23.

2966-050 Lift Kit for 2966-004 Row Cleaner lbs. $ 2,700.00

2966-003-L LH FLTG SNGL WL RM for JD 60/90 series opener 63 lbs. $ 485.00 $525.00

2966-003-R RH FLTG SNGL WL RM for JD 60/90 series opener 63 lbs. $ 485.00 $525.00

2966-004-L LH FLTG SNGL WL RM for JD 60/90 series opener 63 lbs. $ 560.00 $ 600.00

2966-004-R RH FLTG SNGL WL RM for JD 60/90 series opener 63 lbs. $ 560.00 $ 600.00

2966 Series Floating Single Wheel Residue Manager for 60/90 Series opener

Not compatible with box drills


2966 Series Floating Air Adjust Single Wheel Residue Manager for 60/90 Series

opener

Not compatible with box drills

11

Control System 2966



• Floating row cleaner with adjustable depth control with screw

• Wheel options: Tapered tooth; -ST Sharktooth; -BW Bevel Wheel


2966-025A-L LH Single arm Residue Manager 30 lbs. $ 455.00 $ 495.00

2966-025A-R RH Single arm Residue Manager 30 lbs. $ 455.00 $ 495..00


• Floating row cleaner with adjustable depth control with screw • Wheel options: Tapered tooth; -ST Sharktooth® wheel; - BW Bevel Wheel


2966-020A-L LH FLTG SNGL WL RM for JD Twin Row planter w/-602 and floater wheel

60 lbs. $ 420.00 $ 460.00

2966-020A-R RH FLTG SNGL WL RM for JD Twin Row planter w/-602 and floater wheel

60 lbs. $ 420.00 $ 460.00


• Row Unit Mounted coulter Model Description Est Wt List Price

Residue Manager Optional Row Cleaner designed to float with ground contour (see below)


List Price -FW Model Description Est Wt All wheels Floater Wheel

2966-021A-L Left hand Floating Residue Manager for JD Twin Row planter with 2960-021 Unit mount Coulter

lbs. $360.00 $ 400.00

2966-021A-R Right hand Floating Residue Manager for JD Twin Row planter with 2960-021 Unit Mount Coulter

lbs. $ 360.00 $ 400.00

2960-021-SW Unit Mount coulter for JD Twin Row with 13 –SW blade 29 lbs. $ 320.00

2967 Series Floating Single Wheel Residue Manager for Harvest Int’l Planter

11A

2960 & 2966 Series Coulter and Residue Manager for JD Twin Row Planter

2966 Series Floating Single Wheel Residue Manager for JD Twin Row Planter

Must be hydraulic drive

Must be hydraulic drive





• Floating row cleaner with adjustable depth control with screw

• Wheel Options: Tapered tooth; -ST Sharktooth®; - BW Bevel Wheel


2967-002B-L LH Single arm Residue Manager for twin row planter

60 lbs. $ 390.00 $ 430.00

2967-002B-R RH Single arm Residue Manager for twin row planter

60 lbs. $ 390.00 $ 430.00


• Floating row cleaner with adjustable depth control




• Row unit mount

• Adjustable depth settings available in wide and narrow rows


Model Description Est Wt List Price All Wheels 2967-016A Residue Manager without a mounting kit 33 lbs. $ 395.00

2967-028A Residue Manager for use with JD 1700, 7000, 7100, 7200,7300, Kinze 2000, 3000, New Idea,White 6100, 8000 & 9000

37 lbs. $ 450.00

2967-036A Narrow Row Fits Case IH 800-900, 950, 955, 1200 38 lbs. $ 485.00

2967-046A Narrow Row Residue Manager less mounting 33 lbs. $ 440.00

2967-048A Narrow Row Residue Manager for use with JD 1700, 7000, 7100, 7200,7300, Kinze 2000, 3000, New Idea,White 6100 & 8000

38 lbs. $ 485.00

2967-081A Residue Manager for JD 7200/1700 toolbar hanger ass’y 30 lbs. $ 340.00

2967-106A* Fits Case IH 800-900, 950, 955, 1200, 1250 & 2150 37 lbs. $ 450.00

*Will not fit Case IH 800-900 Horizontal Fold planter unless 2 rows of the unit mount attachments are removed before

transporting. Will not fit first year production of 800 unless the Case IH mount plate is modified.

Optional Equipment: 2967-076 Single Wheel R.M. Strap assembly 3 lbs. $ 40.00

12

2967-003A-L LH FLTG SNGL WL Residue Manager 63 lbs. $ 380.00 $ 420.00

2967-003A-R RH FLTG SNGL WL Residue Manager 63 lbs. $ 380.00 $ 420.00

2967 Series Residue Manager


2967 Series Floating Single wheel Residue Manager for Monosem

2967 Series Floating Single wheel Residue Manager for Great Plains Twin Row Planter


• Row unit mounted

• Adjustable depth control with screw

• Use impact or ratchet wrench to quickly adjust

• 1/16” adjustment per click

• Available in wide and narrow rows


Model Description Est Wt List Price All Wheels

2967-052A^ Fits JD 1700,7200,7300, New Idea and White 6100 with standard 14” parallel arms SEE NOTE BELOW

45 lbs. $ 500.00

2967-053A$ Fits Case IH 800-900, 950, 955, 1200, 1250 & 2150 45 lbs. $ 500.00

2967-057A^ Fits JD Planters with long 21” parallel arms or 7000, 7100 standard, Kinze (’92 and older) planters SEE NOTE

45 lbs. $ 500.00

2967-058A Fits White 8000 45 lbs. $ 500.00

$ Will not fit Case IH 800-900 Horizontal Fold planter unless 2 rows of the unit-mounted attachments are removed before transporting. Will not fit first year production of 800 unless the Case IH mount plate is modified.


• Row unit mounted

• Adjustable depth control with screw

• Use impact or ratchet wrench to quickly adjust

• 1/16” adjustment per click

• Available in wide and narrow rows

• Wheel options: Tapered tooth; -ST Sharktooth® wheel; - BW Bevel Wheel Model Description Est Wt List Price All Wheels

2967-054A^ Fits JD 1700,7200,7300, New Idea and White 6100 with standard 14” parallel arms SEE NOTE BELOW

45 lbs. $ 535.00

2967-056A^ Fits JD 1700 Series, 7240, 7340, 1530, 1535 with long (21”) parallel arms and 7000,7100 standard, Kinze (’92 and older) SEE NOTE BELOW

45 lbs. $ 535.00

^NOTE: 15” spacing contact Yetter Sales department.

2967 Series Narrow Row Screw Adjust Residue Manager

2967 Series Screw Adjust Residue Manager


13



• Adjust to float to follow soil contour or locked down to move residue

• Short Floating RM with mount for optional Precision Planting CleanSweep®

• Factory assembled for quick installation


Short Floating Dimensions: 2967-029B length 15-1/2” width 12-3/4” width with FW 14” 2967-013B length 14-1/2” width 11-1/2” width with FW 13”

(30”, 36” & 40” rows) (15”, 20” & 22” rows)

Model Description Est Wt List Price -FW All wheels Floater Wheel



• Short Floating RM with mount for optional Precision Planting CleanSweep®

• Factory assembled for quick installation • For 30”, 36” & 40” rows • For 15”, 20” & 22” rows


Short Floating Dimensions 2967-097B length 19-1/2” width 12-3/4” width with FW 14” 2967-014B length 18-1/2” width 11-1/2” width with FW 13” (30”, 36” & 40” rows) (15”, 20” & 22” rows)

Est Wt List Price -FW All Wheels Floater Wheel

^800 through 1200 and 1220 (6-8 row) could contact hex driveshaft if equipped. Cable drive series may require optional guard below.

2966-013 LH Single Wheel (Twin Row or Narrow Row) Conversion Kit for 2967-013A and 2967-014A 5 lbs $ 40.00

2966-014 RH single Wheel (Twin Row or Narrow Row) Conversion Kit for 2967-013A and 2967-014A 5 lbs $ 40.00 2966-015 John Deere Twin Row Conversion Kit (Converts Twin Row Unit to standard faceplate for 2967-013A and 2967-029A) 7 lbs $ 39.00 2967-074 Attachment adaptor for Great Plains row units 13 lbs $ 34.00 2967-186 Floater wheel (Requires 2 per row) 5 lbs $ 46.00 2966-199 Soil Shield (Requires 2 per row) 4 lbs $ 37.00 2966-096 Case IH Universal Adapter Attachment Heavy Duty Mount Kit 12 lbs $ 85.00 2966-097 Case IH Universal Adapter Attachment Mount Kit 10 lbs $ 50.00 Allows for mounting standard face plate attachments to CNH row units 2966-098 Cable drive guard 5 lbs $ 38.00 (Order when CNH row unit brackets bolt to frame) 2966-099 Case IH cleaner guard 5 lbs $ 32.00

(Order when CNH 1260/1265 row unit head brackets are welded to frame) 2967-901# Clean Sweep® Cylinder Mount Kit for 2967-007 Series Residue Manager 2 lbs $ 26.00 # (Additional parts & hardware will be needed from Precision Planting®)

2967-029B Short Arm Floating Residue Manager fits JD 1700, 7000, 7200, Kinze 2000, 3000, 4900, White planters, Harvest Int’l Laser Pro1 and Laser Pro 1-N w/ Adapter from Harvest

49 lbs $ 525.00 $ 600.00

2967-013B 15” Short Narrow Floating Residue Manager fits JD1700, 7000, 7200, Kinze 2000, 3000, 4900, White planters, Harvest Int’l Laser Pro1 and Laser Pro 1-N w/ Adapter from Harvest

49 lbs $ 525.00 $ 600.00

2967-029B-PP Short Arm Floating Residue Manager fits JD 1700, 7000, 7200, Kinze 2000, 3000, 4900, White planters, Harvest Int’l Laser Pro1 and Laser Pro 1-N w/ Adapter from Harvest

49 lbs $ 525.00 $ 600.00

2967-013B-PP 15” Short Narrow Floating Residue Manager fits JD1700, 7000, 7200, Kinze 2000, 3000, 4900, White planters, Harvest Int’l Laser Pro1 and Laser Pro 1-N w/ Adapter from Harvest

49 lbs $ 525.00 $ 600.00

2967-097B^ Short Arm Floating Residue Manager fits Case IH planter 42 lbs $ 575.00 $ 650.00

2967-014B^ 15” Short Narrow Floating Residue Manager fits Case IH planter 42 lbs $ 575.00 $ 650.00

Optional Equipment

2967 Series Short Floating Residue Manager

** Both Photos Shown w/ SharkTooth® and optional floater wheels**

• Order manual: 2967-029B 2565-696 2967-013B 2565-748

2966-097

Precision Planting® Conceal Part numbers

• Order manual: 2967-097B 2565-696 2967-014B 2565-748

14

BEARING KITS: 2965-119 Service Kit for 2570-740 - 2.812 D-Bolt with wheel bolts 3 lbs $ 75.00 2965-120 Service Kit for 2570-742 – 3.812 D-Bolt with wheel bolts 3 lbs $ 75.00 2965-121 Service Kit for 2570-766 – 2.562 D-Bolt with wheel bolts 3 lbs $ 75.00 DEPTH BAND: 2967-186 Floater wheel (Requires 2 per row) Use with 4 bolt cast hub 5 lbs $ 46.00 2967-186A Floater wheel (Requires 2 per row) Use with 8 bolt Peer Bearing hub assembly 2021 5 lbs $ 46.00 ROW CLEANER SHIELDS: 2967-392 Shield (Requires 2 per row) 1.25 lbs $ 13.44 2967-336 Shield (Requires 2 per row) 1.70 lbs $ 9.88 MOUNTING CONVERSION KITS: 2966-013 LH Single Wheel (Twin Row or Narrow Row) Conversion Kit for

2967-013B and 2967-014B 5 lbs $ 40.00 2966-014 RH single Wheel (Twin Row or Narrow Row) Conversion Kit for 2967-013B and 2967-014B 5 lbs $ 40.00 2966-015 John Deere Twin Row Conversion Kit (Converts Twin Row Unit to standard faceplate for 2967-013B and 2967-029B) 7 lbs $ 39.00 2967-074 Attachment adaptor for Great Plains row units 13 lbs $ 34.00 *2966-096 Case IH Universal Adapter Attachment Heavy Duty Mount Kit 12 lbs $ 85.00 *2966-097 Case IH Universal Adapter Attachment Mount Kit 10 lbs $ 50.00 *Allow for mounting standard face plate attachments to CNH row units PRECISION CLEAN SWEEP ITEMS: 2967-901# Clean Sweep® Cylinder Mount Kit for 2967-007 Series Residue Manager 2 lbs $ 26.00 # (Additional parts & hardware will be needed from Precision Planting®) MISCELLANEOUS OPTIONS: 2966-199 Soil Shield (Requires 2 per row) 4 lbs $ 37.00 2966-098 Cable drive guard 5 lbs $ 38.00 (Order when CNH row unit brackets bolt to frame) 2966-099 Case IH cleaner guard 5 lbs $ 32.00

(Order when CNH 1260/1265 row unit head brackets are welded to frame)

Optional/Additional Equipment

2966-097

14A

2966-199

2967-392

2967-186

2967-336

Xtreme Peer

bearing hub

2967-186A


• Row unit mounted row cleaner


• Use with John Deere® 7200 and newer no-till coulter



Model Description Est Wt. List Price -FW

All Wheels Floater Wheel

2967-042B Floating Residue Manager for John Deere 7200 and newer coulter 52 lbs $ 545.00 $ 620.00

STANDARD FEATURES FOR ALL MODELS • Adjust to float to follow soil contour or locked down to move residue


• 2967-035A Universal row cleaner for old planters and coulters

• 2967-008A Row cleaner for CNH row mounted coulters


Model Description Est Wt List Price -FW


2967-035A Floating Face Plate Mount Floating Residue Manager Fits Yetter 6000, JD 7000,7200,Kinze 2000, 3000, White 6100, 8000

60 lbs $ 525.00 $ 600.00

2967-008A** Floating Residue Manager; Fits CNH 1200, 1240 & 1250 (For use with 2960-020-MW Coulter)

55 lbs $ 505.00 $ 580.00

** NOTE: not for use on all planter models (800, 900, 955, 1200) with the drive shaft below the frame.


• Adjust to float and follow the soil contour or be locked down to move residue


• Compatible with the Precision Planting CleanSweep®

• Use with Kinze® No-till coulter


Model Description Est Wt List Price


2967-006A Floating Residue Manager fits: Kinze Unit Mount Coulter 61 lbs $ 415.00 $ 490.00

2967 Series Floating Residue Manager for JD 7200 and newer Coulter

Standard Wheel

Shown w/ -ST & floater wheel • Order manual: 2565-955

2967 Series Floating Residue Managers for Coulter

2967-035A-ST 2967-008A-ST-FW • Order manual: 2565-487 • Order manual: 2565-695

15

Shown with 2960-127

2967 Series Floating Residue Manager for Kinze Unit Mount Coulter


Standard Wheel


• Row cleaner for 2960-033/2960-034 and 2960-041 coulters

• Adjust to float and follow the soil contour or be locked down to move residue


• Is available separately or with coulter

• Compatible with Precision CleanSweep®



2967-007A Floating Combo Residue Manager kit for 2960-033 and 2960-034 50 lbs $ 485.00 $ 560.00

Note: For 2960 Unit Mount Coulter options - see page 9.

Part number to mount the 2967-007 less the coulter assembly.

2960-035 Floating Combo Mount Kit (JD-MEII/+/XP) 28 lbs $ 77.00

*2967-901 Clean Sweep® Cylinder Mount Kit for 2967-007 Series Residue Manager for Kinze, JD 7000, AGCO 6000

2 lbs $ 26.00

*Will require additional items from Precision Planting®.

2967 Series Floating Combo Residue Manager

2960 Series Brackets for Floating Combo Residue Manager


Optional Equipment

16

2940Series Air Adjust Residue Managers STANDARD FEATURES

Residue manager: • Features parallel linkage so manager floats with ground contour

• Available for wide and narrow row planters

• Adjust up and down pressure independently to create the ideal ride for residue managers

• Down pressure can be increased to fix row cleaner in rigid position

• Units can be raised from cab as needed with push of a button


Visit http://www.yetterco.com for video and more info or contact the Yetter sales team

Yetter Electric Compressor Manual part number is 2565-773

Yetter OR OEM Hydraulic Compressor Manual part number is 2565-779

ORDER FROM SECTIONS 1 - 5 (A, B, C, ETC.)

ALSO ORDER FROM SECTION 6 IF USING THE YETTER HYDRAULIC

COMPRESSOR

1A Residue Manager: Order 1 Residue Manager per row


2940-001B# Air Adjust Residue Manager fits: JD 1700, 7200, CNH 2000, AGCO 9000 WIDE

60 lbs $ 940.00 $ 1,015.00

2940-002B# Air Adjust Residue Manager fits: JD 1700, 7200, CNH 2000, AGCO 9000, NARROW

60 lbs $ 940.00 $ 1,015.00

2940-003B^ Air Adjust Residue Manager fits: with most CNH planters WIDE

65 lbs $ 975.00 $ 1,050.00

2940-004B^ Air Adjust Residue Manager fits: with most CNH planters NARROW

65 lbs $ 975.00 $ 1,050.00

2940-005B Air Adjust Residue Manager fits: JD 7000, AGCO 6000,8000, Kinze 2000, 3000, 4900 WIDE

60 lbs $ 940.00 $ 1,015.00

2940-006B Air Adjust Residue Manager fits: JD 7000, AGCO 6000,8000, Kinze 2000, 3000, 4900 NARROW

60 lbs $ 940.00 $ 1,015.00

#For JD planters with HD Scrapers, need to refer to bottom of page 23.

^For CNH 1260/1265, refer to bottom of page 23.

2A

Tee Kit To calculate the number of packages of tees needed for installation use chart below to figure quantity and price.

2940-147 Package of 10 tees for 3/8 line 1 lbs $ 19.00

Use the chart below for the short floating residue manager ordered out of part 1A. Chart below has been calculated using number of rows x 2 and add 6 to quantity: 24 x 2=48+6 = 54

Rows

# of T-

Kits T-Price Rows

# of T-

Kits T-Price

8 or 12 3 51 36 8 136

15 or 16 4 68 48 11 187

23 or 24 6 102 54 12 204

31 or 32 7 119

17

2940 Series Air Adjust Combo Residue Managers

STANDARD FEATURES

Combo Residue manager: • 16” blades available: 25 Multi-wave, Ripple, Smooth, 13 Shallow Wave or 8 Wave


• Coulter can be removed and residue manager still be used

• Adjustable up and down pressure for residue manager

• Residue manager can be raised or lowered from the cab with the push of a button

• Down pressure can be increased to fix row cleaner rigid

• Down pressure can be decreased to create ideal ride for residue manager

• Floater wheels come standard


1B

Combo Residue Manager : Order 1 Combo Residue Manager or Coulter Only & 1 blade per row

Model Description Est Wt List Price All Wheels & Floater

2940-007B-FW Air Adjust Combo Residue Manager fits: JD 7000, Kinze 2000, 3000, 4900, AGCO 6000,8000 (less coulter blade – order below)

100 lbs $ 1,130.00

2940-010B-FW Air Adjust Combo Residue Manager fits: JD 1700, 7200, CNH 2000, AGCO 9000 (less coulter blade – order below)

95 lbs $ 1,130.00

2940-018 Unit Mount Coulter ONLY fits: JD 7000, AGCO 6000, 8000, Kinze 2000, 3000, 4900 ( less coulter blade – order below)

36 lbs $ 360.00

2940-019 Unit Mount Coulter ONLY fits: JD 1700, 7200, CNH 2000, AGCO 9000 (less blade – order below)

36 lbs $ 360.00

Blades Description Est Wt List Price 2571-162 13 Wave 16” blade 8 lbs $44.00

2571-172 25 Wave 16” blade 8 lbs $44.00

2571-161 16” Ripple blade 8 lbs $44.00

2B

Tee Kit To calculate the number of packages of tees needed for installation use chart below to figure quantity and price.

2940-147 Package of 10 tees for 3/8 line 1 lbs $ 19.00

Use the chart below for the combo residue manager ordered out of part 1B. Chart below has been calculated using number of rows x 2 and add 6 to quantity: 24 x 2=48+6 = 54

Rows

# of T-

Kits T-Price Rows

# of T-

Kits T-Price

8 or 12 3 51 36 8 136

15 or 16 4 68 48 11 187

23 or 24 6 102 54 12 204

31 or 32 7 119

18

STANDARD FEATURES

• Increase or decrease air bag pressure to the 6.5” x 12” firming wheel from your tractor seat

• Facilitates ideal seed-to-soil contact for even emergence

• Complements planter closing wheels by gently firming the seed zone Visit http://www.yetterco.com for more info or contact the Yetter sales team to discuss airline plumbing details.


2940-016

Pneumatic Firming Wheel fits (JD ME II, ME, XP) 55 lbs $ 600.00

STANDARD FEATURES

• Up and down pressure controlled from the tractor cab with the

Air Adjust In-Cab Controller

• Crumbles and firms soil for better seedbed

• Promotes a more consistent seed depth

• Helps create smoother ride for row unit and planter gauge wheels


2940-020

Air Adjust Rolling Basket fits: JD1700, 7200 & AGCO 9000 68 lbs. $ 820.00

2940-021 Air Adjust Rolling Basket fits: CNH 68 lbs. $ 820.00

2940-022 Air Adjust Rolling Basket fits: JD7000, AGCO 6000 & 8000, KZ 2000, 3000 & 4900

68 lbs. $ 820.00

2940 Series Air Adjust Firming Wheel

2940 Air Adjust Rolling Basket

19

2940 Series Air Adjust Wiring & Tubing Kits

3A

Wiring/Tubing Kit – Hydraulic or Electric Compressor (Order one)

Articulated Tractors may require wire harness extensions in addition to the planter width specific wiring kit.

Additional Options ISOBUS Kit (Order one) (All Yetter Control Boxes are WIFI compatible to control with a Tablet, only order ISOBUS kit if customer chooses ISOBUS controls in addition to WIFI/Tablet controls)

Split Row Planter Kit (Order one if needed)

ONLY ORDER IF WANTING TO SHUT OFF BEAN ROWS WHEN CORN PLANTING

2940-072A Split Row Kit - Includes: black & blue air tubing & ball valves 14.3 lbs $ 545.00

Optional Parts

2940-345 Black Airline – 100ft roll 3 lbs $ 98.00

2940-346 Blue Airline – 100ft roll 3 lbs $ 98.00

2940-342 Ball Valve, ¼ turn 1 lb $27.00

Tablet Recommendations (Order one if needed)

ONLY PURCHASE IF USING A TABLET TO CONTROL THE YETTER 2940 SYSTEM - iPad 10.2 32MB – https://www.amazon.com/Apple-iPad-10-2-inch-WiFi-32GB/dp/B08J65DST5?th=1

- Samsung Galaxy S6 Lite 10.4” 64MB – https://www.amazon.com/Samsung-Galaxy-Lite-Tablet-Oxford/dp/B086Z2XFYP/ref=sr_1_3?dchild=1&keywords=2020+Galaxy+Tab+S6+Lite&s=electronics&sr=1-3

Tablet Mount Option (Order one if needed)

ONLY ORDER IF USING 9” – 10” TABLET TO CONTROL THE YETTER 2940 SYSTEM

2940-111 Ram Tablet Mount: Includes Tablet Mount, Arm, Ball, & Hardware 3 lbs $ 200.00

2940-075A 6, 8 & 12 Row Non-ISO Hyd Wiring & Tubing Kit 69 lbs $ 1,420.00

2940-076A 16 Row Non-ISO Hyd Wiring & Tubing Kit 73 lbs $ 1,640.00

2940-077A 24 Row Non-ISO Hyd Wiring & Tubing Kit 46 lbs $ 2,185.00

2940-078A 32, 36, 48 & 54 Row Non-ISO Hyd Wiring & Tubing Kit 19 lbs $ 3,060.00

2940-087A ISOBUS Kit – Plugs in at tractor hitch (Ag Leader RCM2) 10 lbs $ 1,515.00

2940-087A-JD Rear ISOBUS Kit – John Deere Systems 10 lbs $ 945.00

2940-087A-AL Ag Leader ISOBUS Kit, RCM 1 10 lbs $ 540.00

20

2940 Series Yetter Electric Compressor

STANDARD FEATURES

• 12 gallon tank • 6 CFM at 0 psi/2.6 CFM at 100 psi

• Heavy duty electric compressor • 145 psi shut-off/120 psi on

• 50 max length of cable to battery

(See Page 22 & 23 if using OEM or Yetter Hydraulic Compressor) 4A

Pneumatic Electric Compressor Kit (Order one) 2940-050A Pneumatic Compressor Kit: Electric - includes compressor, communication harnesses, 80A

breaker, & 50ft of main power cable 151 lbs $ 3,000.00

5A

Compressor Mounting Kit (Order one) 2940-085 Two point hitch or universal compressor mount kit 50 lbs $ 320.00

2940-086 Planter draft tube or universal compressor mount kit 28 lbs $ 255.00

2940-090 Compressor Mount Kit 8x12 (Drawbar outer telescope tube) 30 lbs $ 120.00


Compressor Options

2940-114 Stand Alone Compressor Control Kit (for customers wanting just the compressor – includes switch power harness, 90feet of power harness extensions, & “Y” harness at the compressor)

2 lbs $ 280.00

2940-182 20’ Compressor Control Harness – This is needed if the compressor is mounted further than 10 feet away from the control box ordered in section 4B or 4C

2 lbs $ 80.00

21

21

2940-086 Mount Kit 2940-085 Mount Kit 2940-090 8x12 & 2940-091 8x16

Hydraulic Comp Mount Kit

Yetter Control Box

STANDARD FEATURES

• Use with Yetter electric or any hydraulic compressor

• Make adjustments quickly and accurately during planting from tractor seat

• Up air bags and down air bag pressure settings can be adjusted independently

• 5 preset settings and also a quick raise/lower icon

• ISOBUS or WiFi Compatible (Android or Apple phone or tablet required)

4B

OEM Hydraulic or Yetter Compressor Control Box Kit INCLUDES: WiFi Module (ISOBUS Kit information on page 20)

2940-053A Pneumatic Control Kit: Controls Up To 3 Pressures: (RU – Up pressure on all rows / RD – Down Pressure on each wing row / WT – down pressure on the center rows or wheel track rows)

38 lbs $ 6,000.00

5B

Control Box Mounting Kit (Order one)

2940-082 5x7 and 7x7 Bar Mount Kit (Main Planter Toolbar) 22.4 lbs $ 190.00

2940-083 8x16 and 8x12 Bar Mount Kit (Drawbar outer telescope tube) 13 lbs $ 165.00

2940-084 Universal Hand Rail Mount Kit 14 lbs $ 110.00

2940-084 Mount 2940-083 Mount 2940-082 Mount

22

Pneumatic Hydraulic Compressor STANDARD FEATURES

• Hydraulic control kit provides air source for 2940-053 and 2940-054

• 12 gallon tank

• Quick air supply recovery

• Can plumb into planter circuit or directly into tractor SVC

• Can plumb into this air supply to operate other pnuematic (Must order from each section A, B & C)

6A

Pneumatic Hydraulic Compressor INCLUDES: Instruction Manual, 10’ wiring harness, 1L Oil

2940-055 Pneumatic compressor kit : Hydraulic 114 lbs $ 3,250.00

6B

Hydraulic Hose & Fittings Kit (Order one)

2940-088 Hydraulic Hose and fitting kit (Planter) 15 lbs $ 280.00

2940-089 Hydraulic Hose and fitting kit (Stand alone/Tractor SCV) 13 lbs $ 205.00

6C

Compressor Mount Kit (Order one)

2940-085 Two point hitch or universal compressor mount kit 50 lbs $ 320.00

2940-086 Planter draft tube or universal compressor mount kit 28 lbs $ 255.00



Compressor Control Harness Extension (Optional)

2940-182 20’ Compressor Control Harness 2 lbs $ 80.00

This is needed if the compressor is mounted further than 10 feet away from the control box ordered in section 4B or 4C

Compressor Options

2940-114 Stand Alone Compressor Control Kit (for customers wanting just the compressor – includes switch power harness, 90 feet of power harness extensions, & “Y” harness at the compressor)

2 lbs $ 280.00

2940-118 J1 Hydraulic Conversion Harness (for customers converting from the electric compressor to the hydraulic compressor

1 lb $ 80.00

2940-049A Air adjust mount extension kit (Need 1 per row for use with –HD scrapers on JD planters – need 1 per row)

11 lbs $ 90.00

2940-059 CNH Adaptor kit for 1260/1265 planters with 30” spacing 84 lbs $ 745.00

2940-060 CNH Adaptor kit for 1260/1265 planters with 20”-22” spacing 48 lbs $ 450.00

2940 Series Optional Equipment

23

1200 Series Single Dual


• Uses 10” diameter fertilizer blade

• Dual wheels are staggered 3/4” The depth is adjustable in 1/4” increments Units can apply fertilizer 2” or 3” off the row Available as injection or spring loaded knife

Section A: Order from section A or B and wheel in C and Fertilizer option in D


^2968-020B-L-LB LH Row unit mount fertilizer - fits JD 1700,7200,7300; less blade ass’y 20 lbs $ 180.00

^2968-020B-R-LB RH Row unit mount fertilizer - fits JD 1700,7200,7300; less blade ass’y 20 lbs $ 180.00

^2968-021B-L-LB LH Row unit mount fertilizer- fits Kinze, JD planters 7000 and 7100; less blade 20 lbs $ 180.00

^2968-021B-R-LB RH Row unit mount fertilizer- fits Kinze, JD planters 7000 and 7100; less blade 20 lbs $ 180.00

2968-022B-L-LB LH Row unit mount fertilizer – fits White 8000; less blade ass’y 20 lbs $ 180.00

2968-022B-R-LB RH Row unit mount fertilizer – fits White 8000; less blade ass’y 20 lbs $ 180.00

2968-025B-L-LB LH Row unit mount fertilizer - fits White 9000; less blade ass’y 20 lbs $ 180.00

*968-025B-R-LB RH Row unit mount fertilizer - fits White 9000; less blade ass’y 20 lbs $ 180.00

2968-026A-L-LB LH Row unit mount fertilizer – fits Harvest Int’l; less blade ass’y 20 lbs $ 180.00

2968-026A-R-LB RH Row unit mount fertilizer – fits Harvest Int’l; less blade ass’y 20 lbs $ 180.00

2968-027-L-LB LH Row unit mount fertilizer – fits Kinze 4900; less blade ass’y 20 lbs $ 195.00

2968-027-R-LB RH Row unit mount fertilizer – fits Kinze 4900; less blade ass’y 20 lbs $ 195.00

^2968-050-L-LB LH Row unit mount fertilizer - fits Case 2000; less blade ass’y 20 lbs $ 265.00

^2968-050-R-LB RH Row unit mount fertilizer - fits Case 2000; less blade ass’y 20 lbs $ 265.00

^2968-052-L-LB LH Row unit mount fertilizer- fits Case1200; less blade 20 lbs $ 265.00

^2968-052-R-LB RH Row unit mount fertilizer- fits Case 1200; less blade 20 lbs $ 265.00

Section B:


^2968-040A-LB Dual Row unit mount fertilizer - fits JD 1700,7200,7300, less blade ass’y 36 lbs $ 250.00

^2968-041A-LB Dual Row unit mount fertilizer - fits Kinze, JD planters 7000 and 7100; less blade 36 lbs $ 250.00

2968-042A-LB Dual row unit mount fertilizer – fits 8000 White, less blade ass’y 36 lbs $ 250.00

2968-043A-LB Dual row unit mount fertilizer – fits 9000 White, less blade ass’y 36 lbs $ 250.00

2968-044A-LB Dual row unit mount fertilizer – fits Harvest Int’l, less blade ass’y 36 lbs $ 250.00

2968-045A-LB Dual row unit mount fertilizer – fits Kinze 4900, less blade ass’y 36 lbs $ 250.00

^2968-051-L-LB Dual Row unit mount fertilizer – Case 2000, less blade ass’y 36 lbs $ 330.00

^2968-051-R-LB Dual Row unit mount fertilizer - fits Case 2000; less blade 36 lbs $ 330.00

^2968-053-L-LB Dual row unit mount fertilizer – fits Case 1200, less blade ass’y 36 lbs $ 330.00

^2968-053-R-LB Dual row unit mount fertilizer – fits Case 1200, less blade ass’y 36 lbs $ 330.00

Section C: Wheel options (Requires 1 per for Section A and 2 per for Section B

2968-132 10” Notch Fertilizer wheel assembly 10 lbs $ 140.00

2968-134 10” Smooth Fertilizer wheel assembly 10 lbs $ 140.00

Section D: Fertilizer options (Requires 1 per for Section A and 2 per for Section B

2968-090A-L LH Spring-loaded Knife Kit for 2020 models (10” Wheels only) 3 lbs $ 89.00

2968-090A-R RH Spring-loaded Knife Kit for 2020 models (10” Wheels only) 3 lbs $ 89.00

2968-091 Injection Kit (one side) 1 lbs $ 17.00

^Will not fit Kinze 3650 and Single and Dual 2968 will not fit CCS stack fold planters

For Monosem, Great Plains and other planter models not listed above - contact sales department.

OPTIONAL EQUIPMENT 2968-054 Box Mount Kit 2000 Series-needed for box planters for 2968-050 and 2968-051 9 lbs $ 84.00


2968-030 Closing Disc Fertilizer Kit – Includes 8” diameter wheel for Case 1200 10 lbs $ 135.00

2968 Series Row –Unit Mount in Between Fertilizer Opener Single and Dual Models

24

Single

Dual

2968-090 Dual shown

• Order manual: 2565-960 (2968-050A thru -054A)

• Order manual: 2565-951 (-020,021,040,041)

2000 Series

• Order manual: 2565- 752(-022 thru 027 & -042 thru 045) 2968-091 Single Shown

2968 Series Closing Disc Fertilizer for Case Planters


• Places liquid fertilizer behind the planter closing wheels • Follows the ground contour during planting • Air cylinder allows in-cab adjustments to downforce or allows unit

to raise when not in use • Provides placement of fertilizer up to 1-1/2” deep and 2”-3” off the

row


^2969-020A IntelliNject™, John Deere 43 lbs $ 985.00 *2969-021A IntelliNject™, Kinze 3000 & 4000 43lbs $ 985.00 2969-025A IntelliNject™, White 9000 43lbs $ 985.00

*Will not fit Kinze 3650

^ If you have the pneumatic closing system, contact the Yetter Service Team before ordering.

Contact Yetter Sales Department @ 800-447-5777 for using own air source and controls or order

the below items in optional equipment.


2969-053 Pneumatic Controller Kit for 2969 IntelliNject™ lbs $ 1,720.00

1200-020 Air Compressor Kit lbs $ 1,140.00

#2969-050 5” Setback kit for John Deere lbs $ 125.00

2969-076 ¼” Air Line Kit up to 24 rows lbs $ 545.00

# Not compatible with precision plantings furrow force.

2969 Series IntelliNject™

Optional Equipment


25


• Double hub mounting for 16” or 18” blades that are spaced 6” apart

• Mount to existing chisel or field cultivator shanks in place of shovels Section A

Model No. Description Est Wt List Price 2982-001-MW Vertical Tillage Attachment kit with 18” 25 wave blade 47 lbs $ 355.00

2982-001-SW Vertical Tillage Attachment kit with 18” 13 wave blade 47 lbs $ 355.00

2982-001-W Vertical Tillage Attachment kit with 18” 8 wave blade 47 lbs $ 355.00 Other blade options available – call Yetter sales department for details.

Optional equipment:

2982-102 VTA adaptor kit for NH3 shank 4 lbs $ 67.00


2970-135 Front bar kit for JD 7000 4 Row and 6 Row Narrow planters 248 lbs $ 1,290.00

2970-162 10” Extension bracket. Used on White planters to move 3” x 3” diamond bar 10” forward so coulter can clear drive shaft

17 lbs $ 81.00

2975-130 Extension kit for 4 Row Narrow/Wide and 6 Row Narrow JD 7200 Drawn planters With 3” x 3” bar.

139 lbs $ 760.00

2975-142 Bar remount kit for Kinze Series II single frame planters, (Dry fertilizer only) 65 lbs $ 295.00

2975-148 Kinze bar kit, 5” x 7” & 7” x 7” (2 rows) 68 lbs $ 470.00

2975-188 6” Set back bracket for JD 7000, Yetter and Kinze 28 lbs $ 225.00

2975-189 6” Set back bracket for JD 7200 &1700 30 lbs $ 225.00

2990-148 Front bar mounting kit for pull-type planters without fertilizer bar, fits 4 Row Narrow/Wide and 6 Row Narrow

168 lbs $ 670.00

2990-167 Front fold kit for JD 7200 12 Row Flex Fold planter.(Dry fertilizer only) 155 lbs $ 670.00

Consult your Yetter Buyer’s Guide for more specific details at www.yetterco.com

2990-208 Shank, 12 5/8" long, 3" offset $ 63.00

2990-221 Shank, 27" long, 3" offset $ 75.00

2990-310 Shank, 12 5/8" long $ 32.00

2990-318 Shank, 16" $ 31.00

2990-350 Shank, 27 1/8" $ 58.00

2990-353 Shank, 22” long, ¾” offset $ 48.00

2990-370 Shank, 30" long $ 62.00

3010-303 Shank, 22” long $ 52.00

3011-302 Shank, 22" long, 5 ½” offset $ 66.00


2990-154 Clamp Kit, 2 1/2" sq bar $ 70.00

2990-155 Clamp Kit, 2" x 6" ar $ 73.00

2990-156 Clamp Kit, 4" x 4" sq bar $ 69.00

2990-157 Clamp Kit, 5” x 7” bar $ 69.00

2990-158 Clamp Kit, 7" x 7" bar $ 69.00

2990-159 Clamp Kit, 3" diamond bar $ 80.00

2990-163 Clamp Kit, 3" sq bar $ 65.00

2990-171 Clamp Kit, 3” x 4” bar $ 67.00

2990-172 Clamp Kit, 4" x 6" bar $ 65.00

2990-173 Clamp Kit, 6" x 4" bar $ 69.00

2990-175 Clamp Kit, 7” x 4” bar $ 71.00

2990-182 Clamp Kit, 4” x 7” bar $ 70.00

2990-183 Clamp Kit, 6” x 6” bar $ 79.00

6300-105 Clamp Kit, 5" x 5" bar $ 73.00

2571-168 20” Ripple Blade $ 61.00

2571-169 18”Straight Blade $ 80.00

2571-178 .25 x 20”Straight Blade $ 61.00

2571-196 22” Coulter Blade $ 93.00

2571-199 .157 x 20” Straight Blade $ 62.00

2571-278 .177 x 19.94” 25 Wave Blade $ 83.00

2571-279 .256 x 22.60” Coulter Blade $ 99.00

Extension Brackets and Front Bar Mount Kits For 2995 and Generation III Fertilizer Coulters

Toolbar size: Horizontal x Vertical

Other Clamp Kits Available

2982 Series Vertical Tillage Attachment


Other Shank Sizes Available

26

Other Blade Options Available


• Parallel linkages with independent adjustable disc sealers

• 2 heavy duty down pressure springs with quick adjustable pressure

• Universal mount fits 4 x 6, 6 x 6, 5 x 7 or 7 x 7 toolbars

• Adjustable depth from 5” - 9” HP requirements: 25 to 30 per shank @ 6” to 8” depth


Main Body:

2984-123-N-RT Same as -123-N only with the Rock Trip option 338 lbs $1,840.00

Knife Option:

2920-204 Standard NH3 knife 4 lbs $ 64.00

Residue Manager Option:

2984-028A-ST Residue Manager with *Shark Tooth wheels 43 lbs $ 455.00

Sealer Option:

2984-030A-S Closing disc 16” smooth blades 122 lbs $ 725.00

2984-030A-N Closing disc 16” notch blades 122 lbs $ 725.00

U-bolt Options:

2984-044 4” x 4” U-bolt assembly 2 lbs $ 29.00

2984-046 4” x 6” Adapter kit 21 lbs $ 125.00


2984-066 6” X 6” Adapter kit 21 lbs $ 125.00


Optional Equipment:

2984-031 Rolling basket^ 97 lbs $ 695.00

2984-134 VTA Adapter 10 lbs $ 38.00 ^When using Rolling Basket and VTA adapter – VTA needs to be ordered with 16” blades.

STANDARD FEATURES FOR ALL MODELS • 14” diameter basket • 11” wide basket • Spring loaded to float • Can be locked up • Adjustable down force


2984-026 Rolling Basket to fit DMI Shank 120 lbs $ 680.00

2984-027 Rolling Basket to fit Maverick Opener 120 lbs $ 680.00

2984 Series Rolling Basket

Shown on Maverick


2984 Series Maverick HR Plus Opener

27

Order manual: 2565-762


• Operating speeds at 6-10 mph and 1-1/2”-4” deep

• Blade arrangement and rolling basket conditions existing strips to warm and condition planting zone

• Features parallel linkage to follow field contour and easy adjustments

• Has universal mounting bracket to fit 4” x 4”, 4”x 6”, 6”x 6”, 5”x 7” and 7”x 7” toolbars ● Front bracket enables mounting existing planter attachments for more options

● Photo shown with Optional 2967-029A-ST-FW, See page 14 ● Optional fertilizer attachments available

ORDER from A and B

Section A:

-ST denotes SharkTooth® wheel Section B:

U-bolt Options:

2984-044 4” x 4” U-bolt assembly 2 lbs. $ 29.00

2984-046 4” x 6” Adapter kit 21 lbs. $ 125.00

2984-066 6” X 6” Adapter kit 21 lbs. $ 125.00



Optional Equipment:

2984-080 Liquid Fertilizer Kit Center 1 lb. $ 39.00

2984-081 Dry Fertilizer Kit Center 3 lbs. $ 135.00

2984-086-L LH Fertilizer Tube Bracket 5 lbs. $ 80.00

2984-086-R RH Fertilizer Tube Bracket 5 lbs. $ 80.00


• Operates at 5° angle off center • 25” coulter blade

• Spring cushioned • Fits 6” and 7” Vertical toolbars

• Coulter can be assembled right or left hand

• Tapered bearings

Section A


2986-122 Avenger with 4” x 4” mount assembly 120 lbs. $ 1,170.00

2986-125 Avenger with standard mount assembly 209 lbs. $1,265.00

Section B

2986-120-L Left hand spring loaded floating scraper 45 lbs. $ 320.00

2986-120-R Right hand spring loaded floating scraper 45 lbs. $ 320.00

Optional Equipment:

2986-108 Skid shoe kit 51 lbs. $ 290.00

*For sealing options see page 5.


2984-150A-ST Strip Freshener, SharkTooth® center blade w/ -ST® closer wheels 360 lbs. $ 2,000.00

2984-150A-SW Strip Freshener, 16” 13 SW center blade w/ -ST® closer wheels 360 lbs. $ 2,000.00

2984-150A-R Strip Freshener, 16” center Ripple blade w/ -ST® closer wheels 360 lbs. $ 2,000.00

2986 Series 25” Avenger® Coulters

28


2984 Series Strip Freshener™


Optional row cleaner


• Operating speeds at 6-10 mph and 1-1/2”-4” deep with adjustable gauge wheels

• Blade arrangement and rolling basket conditions existing strips to warm and condition planting zone

• Features parallel linkage to follow field contour and easy adjustments

• Has universal mounting bracket to fit 4”x 6”, 6”x 6”, 5”x 7” and 7”x 7” toolbars

• Wheel options: -BW Bevel wheel and –ST Sharktooth wheel add Floater wheel with -FW

ORDER from A, B and C Section A:

Section B: Includes Precision Planting® CleanSweep cylinder with row cleaner kit All Wheels & Floater Wheel

Model No Description Est. Wt. List Price

2984-090A-NR Strip Freshener RM, Bevel or Sharktooth with Floater Wheel, Narrow row

45 lbs $ 650.00

2984-090A-W Strip Freshener RM, Bevel or Sharktooth with Floater Wheel, Wide row

45 lbs $ 650.00

Section C:

U-bolt Options:

2984-046 4” x 6” Adapter kit 21 lbs $ 125.00

2984-066 6” X 6” Adapter kit 22 lbs $ 125.00



Optional Equipment:

2984-082 RH Liquid Fertilizer Kit 22 lbs $ 38.00

2984-083 LH Liquid Fertilizer Kit 13 lbs $ 38.00

2984-084 Center Liquid Fertilizer Kit 15 lbs $ 64.00

2984-085-R RH Center Dry Fertilizer Kit 51 lbs $ 86.00

2984-085-L LH Center Dry Fertilizer Kit 51 lbs $ 86.00

2984-258 RH Side Mount Dry Fertilizer Tube 2 lbs $ 47.00

2984-259 LH Side Mount Dry Fertilizer Tube 2 lbs $ 47.00

ORDER from A, B, C, D and E

Section A

2984-053 Cab Control Box Kit, Strip Freshener CC $ 2,000.00

Section B

2984-076 6-18 Row Air Plumbing Kit 15 lbs $ 845.00

2984-078 24-36 Row Air Plumbing Kit 13 lbs $ 1,390.00

Section C

2940-055 Pneumatic Compressor Kit, Hydraulic 114 lbs $ 3,250.00

Section D

2940-089 Hydraulic Hose and Fitting Kit 13 lbs $ 225.00

Section E

2940-086 Draft Tube or Universal Mount Kit 28 lbs $ 255.00


2984-050B-R-ST Strip Freshener CC, Ripple with Sharktooth Berming Discs 392 lbs $ 3,820.00

2984-050B-R-SW Strip Freshener CC, Ripple with 13 Wave Berming Discs 384 lbs $ 3,820.00

2984 Series Strip Freshener CC

Control System Strip Freshener CC

29


• Available in right and left hand models • Adjustable depth settings

• Parallel linkage for consistent fertilizer depth • Universal mount kits

• Swivel casting capable of being locked

• Available 17” and 20” blade options

• Injection or rear knife fertilizer placement options

Order parts from A, B, C, and D to complete coulter assembly Section A: Order manual: 2565-369 Model No. Description Est Wt. List Price

2995-065-L LH 2995 Fertilizer Coulter assy, 17” REAR LIQUID KNIFE 65 lbs $ 430.00

2995-065-R RH 2995 Fertilizer Coulter assy, 17” REAR LIQUID KNIFE 65 lbs $ 430.00

2995-065-LIHD LH 2995 Fertilizer coulter assy, 17” LIQUID INJECTION 70 lbs $ 440.00

2995-065-RIHD RH 2995 Fertilizer coulter assy, 17” LIQUID INJECTION 70 lbs $ 440.00

2995-075-L LH 2995 Fertilizer coulter assy, 17” DRY REAR KNIFE 65 lbs $ 440.00

2995-075-R RH 2995 Fertilizer coulter assy, 17” DRY REAR KNIFE 65 lbs $ 440.00

2995-075-LIHD LH 2995 Fertilizer coulter assy, 17” DRY INJECTION 70 lbs $ 470.00

2995-075-RIHD RH 2995 Fertilizer coulter assy, 17” DRY INJECTION 70 lbs $ 470.00

Section B: Section C: Section D:

* More clamps, shanks and blades available. Contact Yetter sales department @ 800-447-5777 for further information.

2996-057-L LH 2996 Fertilizer coulter assy, 20” LIQUID REAR KNIFE 80 lbs $ 525.00

2996-057-R RH 2996 Fertilizer coulter assy, 20” LIQUID REAR KNIFE 80 lbs $ 525.00

2996-057-LIHD LH 2996 Fertilizer coulter assy, 20” LIQUID INJECTION 85 lbs $ 515.00

2996-057-RIHD RH 2996 Fertilizer coulter assy, 20” LIQUID INJECTION 85 lbs $ 515.00

2996-058-L LH 2996 Fertilizer coulter assy, 20” DRY REAR KNIFE 85 lbs $ 565.00

2996-058-R RH 2996 Fertilizer coulter assy, 20” DRY REAR KNIFE 85 lbs $ 565.00

2990-208 Shank, 12 5/8" long, 3" offset $ 63.00

2990-221 Shank, 27" long, 3" offset $ 75.00

2990-310 Shank, 12 5/8" long $ 32.00

2990-318 Shank, 16" $ 31.00

2990-350 Shank, 27 1/8" $ 58.00


2990-370 Shank, 30" long $ 62.00

3010-303 Shank, 22” long $ 52.00

3011-302 Shank, 22" long, 5 ½” offset $ 66.00


2975-151 Clamp Kit, 3” x 6” bar $ 62.00

2990-153 Clamp Kit, 2" sq bar $ 65.00

2990-154 Clamp Kit, 2 1/2" sq bar $ 70.00

2990-155 Clamp Kit, 2" x 6" ar $ 73.00

2990-156 Clamp Kit, 4" x 4" sq bar $ 69.00

2990-157 Clamp Kit, 5” x 7” bar $ 69.00

2990-158 Clamp Kit, 7" x 7" bar $ 69.00

2990-159 Clamp Kit, 3" diamond bar $ 80.00

2990-163 Clamp Kit, 3" sq bar $ 65.00

2990-171 Clamp Kit, 3” x 4” bar $ 67.00

2990-172 Clamp Kit, 4" x 6" bar $ 65.00

2990-173 Clamp Kit, 6" x 4" bar $ 69.00

2990-175 Clamp Kit, 7” x 4” bar $ 71.00

2990-182 Clamp Kit, 4” x 7” bar $ 76.00

2990-183 Clamp Kit, 6” x 6” bar $ 79.00

6300-105 Clamp Kit, 5" x 5" bar $ 73.00

2571-158 17” Ripple Blade $ 66.00

2571-179 17” 25 Wave Blade $ 61.00

2571-168 20” Ripple Blade $ 61.00

2571-165 17” Smooth Notch Blade $ 60.00

2571-278 20” 25 Wave Bl $ 83.00

2995 / 2996 Series Parallel Linkage Fertilizer Coulters

30

Toolbar size- Horiz x Vert


• Universal mounting kits available

• Adjustable depth settings

• Poly spring insert

• Injection or rear knife fertilizer options

• 17”, 18”, 20” or 22” blade options

Also available in Left Hand models.

Section A


2995-140* Single arm coulter assembly less clamp, shank and blade 43 lbs $ 310.00

2995-017* Generation III single arm coulter 17” – liquid knife 57 lbs $ 405.00

2995-018* Generation III single arm coulter 17”/20” – with injection nozzle 55 lbs $ 415.00

2995-020* Generation III single arm coulter 20” – liquid knife 60 lbs $ 430.00

2995-019 Generation III single arm coulter 17” – dry knife 58 lbs $ 430.00

* Order blades, clamps and shanks from Section B, C and D on page 30.

Part Number Description Est. Wt. List Price 2970-133 Knife scraper (fits all CAD tip knives) 1 lb $ 21.00 2975-120 Non-stick impact resistant polymer Gauge Wheel Kit 5 lbs $ 92.00 approx. 3” or 4” fertilizer depth placement settings 2975-119 Non-stick impact resistant polymer Gauge Wheel – 9” only with hardware 3 lbs $ 49.00 2975-147 Non-stick impact resistant polymer Gauge Wheel – 11” only with hardware 3 lbs $ 62.00 2976-133 Knife scraper for 20” coulter blade 1 lb $ 27.00 2995-109 Spring Cushioned heavy-duty liquid injection kit, 17”/20” 6 lbs $ 79.00 2995-130 Spring Cushioned heavy-duty dry injection kit 6 lbs $ 115.00


• Spring loaded arm follows ground contour • Adjustable depth stop

• Quickly adjust down pressure

• Adjustable angle of the sealing wheels closes slot

o Mounts to Yetter and other fertilizer coulters offered in the market Order from section A and B

Section A Model Description Est Wt List Price

6200-060B-L LH Coulter closer with cast wheel 40 lbs $ 320.00

6200-060B-R RH Coulter closer with cast wheel 40 lbs $ 320.00

6200-062A-L LH Coulter closer with SharkTooth® wheel 31 lbs $ 320.00

6200-062A-R RH Coulter closer with SharkTooth® wheel 31 lbs $ 320.00

Section B

6200-124 Mount hardware for Blu-Jet® Coulters with rear knife 2 lbs $ 18.00

6200-161 Mount hardware for Yetter 2995/2996/Gen III Coulters 2 lbs $ 13.00

6200-162 Mount hardware for 3” Arm/2995-086 Xtreme™ (2015&older)/ Shield/ CNH or DMI Coulters

2 lbs $ 13.00

6200-163 Mount hardware for arm Clymer Coulter – Liquid tube 2 lbs $ 13.00

6200-165 Mount hardware/adapter plate for bolt on spring injector arm, Clymer Coulter

2 lbs $ 45.00

6200-166 Mount hardware for 2995-086 Xtreme™ (2016) 2 lbs $ 13.00

6200-172-L Mount hardware/offset bracket for Ag Systems – Left Hand 5 lbs $ 45.00

6200-172-R Mount hardware/offset bracket for Ag Systems – Right Hand 5 lbs $ 45.00

6200-175 Mount hardware & arm for Blu-Jet® Coulter with rear injector 5 lbs $ 60.00

Optional & Replacement Equipment for 2995 / 2996 and Gen III Coulters

Generation III Coulter


31

6200 Series N Keeper™


No fertilizer option


• 20” blade available in smooth, ripple • Available with injection or rear knife

• Mounting kits available for: 4” sq.”, 4” x 6” • Adjustable depth settings

6” x 4”, 6” sq., 5” x 7” and 7” sq • Available in right and left hand models

• Coulter allows 6” of vertical travel

• Injection or rear knife fertilizer placement options

Order parts from A, B, C, and D to complete coulter assembly

Section A: XFC Fertilizer Coulter Order manual: 2565-788 Model No. Description Est Wt. List Price

2995-086-L LH XFC Xtreme™ Fertilizer Coulter assy 58 lbs $ 440.00

2995-086 RH XFC Xtreme™ Fertilizer Coulter assy 58 lbs $ 440.00

Section B: Shank

2995-243 20” Coulter Shank 14 lbs $ 58.00

2995-255 25” Coulter Shank 18 lbs $ 69.00

Section C: Blades

2571-168 .157 x 20” Multi-hole fluted 13 lbs $ 61.00

2571-199 .157 x 20” Multi-hole flat blade 14 lbs $ 62.00

Section D: Injector/Knife Kit (Not applicable with 2995-087)

2995-083 Injector Kit 2 lbs $ 92.00

2995-084 Fertilizer Knife Kit - with 3/8” tube 5 lbs $ 64.00

Section E: Mount Kit (toolbar width x height)

2995-080 Rigid Mount Bracket 4x4 & 4x6 (requires 1 u-bolt kit) 9 lbs $ 76.00

2995-081 Offset Mount Bracket 4x4, 4x6, 5x5 ,5x7, 7x5, 7x4 &7x7 (requires 2 u-bolt kits) 16 lbs $ 125.00

2995-088 Rigid Mount Bracket 6x4, 6x6, 7x4, 7x5, 7x7 (requires 1 u-bolt kit) 11 lbs $ 76.00

2995-092 Rigid C-shank Mount Bracket 4x4, 5x5, 6x6, 7x7 (requires 2 u-bolt kits) 22 lbs $ 125.00

2995-098 Veritcal Toolbar Mount Bracket 2.5x2.5, 3x3, 5x5,6x6 (call Yetter) 8 lbs $ 76.00

2995-099 Rigid Mount Bracket 5x5, 5x7 (requires 1 u-bolt kit) 9lbs $ 76.00

Section F: U-bolt Kits

6000-030 4”x 4” toolbar ¾”u-bolt kit 2 lbs $ 17.00

6000-031 4”x 6” toolbar ¾”u-bolt kit 2 lbs $ 20.00 6000-032 5”x 5” toolbar ¾”u-bolt kit 2 lbs $ 17.00 6000-033 5”x 7” toolbar ¾”u-bolt kit 2 lbs $ 20.00 6000-034 6”x 4” toolbar ¾”u-bolt kit 2 lbs $ 17.00 6000-035 6”x 6” toolbar ¾”u-bolt kit 2 lbs $ 20.00 6000-036 7”x 5” toolbar ¾”u-bolt kit 2 lbs $ 17.00 6000-037 7”x 7” toolbar ¾”u-bolt kit 2 lbs $ 17.00


• Has 1 ¾” diameter mount shank • Mounting kits available for: 4” sq.”, 4” x 6”

• Available Right Hand only 6” x 4”, 6” sq., 5” x 7” and 7” sq.

• Allows 6” of vertical travel Order from Section A Below

And then B, D, E and F above Section A: XCC Coulter Order manual: 2565-788 Model No. Description Est Wt. List Price

2995-087 XCC Xtreme™ Cutting Coulter 14 5/8” to 20” Blade 51 lbs $ 360.00

Section C: Blades

2571-168 .157 x 20” Multi-hole fluted 13 lbs $ 61.00

2571-199 .157 x 20” Multi-hole flat blade smooth 14 lbs $ 62.00

Section A:

XCC Coulter Model No. Description Est Wt. List Price

2995-089 XCC Xtreme™ Cutting Coulter 24” Blade 51 lbs $ 370.00

Section C: Blades

2571-282 .25 x 24.8” Flat blade smooth 32 lbs $ 81.00

2995 Xtreme™ (XFC) Fertilizer Coulters

32

2995 Xtreme™ (XCC) Cutting Coulters


• Available in right and left hand models • Adjustable depth settings

• Parallel linkage for consistent fertilizer depth • Universal mount kits

• Swivel casting capable of being locked

• Available 17” and 20” blade options

• Injection or rear knife fertilizer placement option

Complete coulter assembly from section A and E below

And Order clamp, shank and blades from Section B, C and D on page 30.

Section A – Order one assembly per row


2995-108A-LH LH Double No-till Coulter 90 lbs $ 405.00

2995-108A-RH RH Double No-till Coulter 90 lbs $ 405.00

Section E – Order two assemblies per row


2995-109 Spring Mount Liquid Fertilizer Injection Kit 7 lbs $ 79.00

2995-193 17” Liquid Knife Kit 4 lbs $ 88.00

2995-194 17” Dry Knife Kit 6.5 lbs $ 115.00


• Spring cushioned to reduce damage • Universal mounting kits available

• 900 lbs. down pressure (maximum) • Adjustable depth settings

• Blade size 18” and under • Swivel / Non-swivel

Complete coulter assembly from section A and B below

And Order clamp and shank from Section B and C on page 30.

Section A – Order one assembly per row


2999-101 Basic Coulter Assembly (less blade) 30 lbs $ 310.00

Section B Order one coulter blade per assembly


2571-161 16” Ripple Blade 8 lbs $ 44.00

2571-162 16” Shallow-wave Blade (13 Wave) 7 lbs $ 42.00

2571-166 14-5/8” 25 Multi-wave Blade (25 wave) 7 lbs $ 74.00

2571-172 16” Multi-wave Blade (25 Wave) 8 lbs $ 44.00

2571-155 18” Shallow-Wave Blade (13 Wave) 9 lbs $ 54.00

2571-158 17” Ripple Blade 8 lbs $ 66.00

2571-179 18” Multi-Wave Blade ( 25 Wave) 9 lbs $ 61.00

Double Hub Spring Cushioned Coulters


33

2999 Series Frame Mounted Spring Cushioned Coulters


34


• 180° flat folding toolbar (3500) • Hydraulic cylinders and hoses (3500)

• 3-pt. Hitch to accommodate Cat II and III • 16 teeth per wheel hitches and most quick hitches (12’-46’) • Forged, self sharpening teeth • 21” hoe wheels with replaceable center bearings • Light kit (not factory installed)

• S.M.V. Emblem • Cat III & IV hitch on (54’ & 60’) Toolbar Dimensions

3412 – 4” x 4” x ¼” x 149” 3428 – 5” x 7” x ¼” x 338” 3415 – 4” x 4” x ¼” x 184” 3430 – 5” x 7” x ¼” x 366” 3421 – 5” x 7” x ¼” x 255” 3434 – 5” x 7” x ¼” x 408”

Section A: Rigid hoe parts box

3412-101 12’ Rotary hoe assembly parts boxes 70 lbs $ 630.00






Section A: Rigid hoe min-till parts box 3412-101-MT 12’ Rotary hoe assembly parts boxes 240 lbs $ 1,980.00

3415-101-MT 15’ Rotary hoe assembly parts boxes 280 lbs $ 2,300.00





Section B: Rigid hoe toolbar Model No. Width Transport Rows Number of wheels Est Wt List Price

3412-100 12’ 12’ 4 – 30”, 4 – 36” 42 1,160 lbs $ 5,815.00

3415-100 15’ 15’ 4 – 40”, 6 – 30” 52 1,400 lbs $ 6,820.00

3421-100 21’ 21’ 6 – 40”, 8 – 30” 72 1,910 lbs $ 9,385.00

3428-100 28’ 28’ 8 – 40” 96 2,500 lbs $ 11,760.00

3430-100 30’ 30’ 12 – 30” 104 2,930 lbs $12,780.00

3434-100 34’ 34’ 10 – 40” 116 3,680 lbs $ 14,410.00

Optional Equipment


3400-172 Helper springs for added down pressure. One spring fits one wheel. 2 lbs $ 30.00 3400-147 Trash guard to clean hoe wheels. One guard fits one wheel. 2 lbs $ 29.00 3400-170 Min-till Conversion Kit requires one per each rear arm. 9 lbs $ 90.00 Gauge wheels will not fit models 3412 and 3415. Options not factory installed.

Replacement Hoe Wheels Model No. Description Est Wt List Price

3400-111A Rotary Hoe Wheel (black) 14 lbs $ 68.00 3400-111-G Rotary Hoe Wheel (green) 14 lbs $ 70.00

3400 Series Toolbar Rotary Hoes


Must order Hoe Boxes from Section A and the

Toolbar from Section B:

35

Toolbar Dimensions

3525 – 7” x 7” x ¼” x 300” 3546 – 7” x 7” x 3/8” x 303” center 3528 – 7” x 7” x ¼” x 336” 7” x 7” x 1/4” x 123” wings 3530 – 7” x 7” x ¼” x 364” 3554 – 7” x 7” x 1/2” x 334” center 3534 – 7” x 7” x ¼” x 406” 7” x 7” x 3/8” x 156” wings 3541 – 7” x 7” x 3/8” x 245” center 3560 – 7” x 7” x ½” x 386” center 7” x 7” x ¼” x 123” wings 7” x 7” x 3/8” x 170” wings

Model No. Width Est Wt List Price

Section A: Folding Rotary Hoe Parts Kit 3525-101 25’ Rotary hoe assembly parts boxes 245 lbs $ 2,290.00

3528-101 28’ Rotary hoe assembly parts boxes 245 lbs $ 2,400.00





3554-101 54’ Rotary hoe assembly parts boxes 5,530 lbs $ 8,800.00

3560-101 60’ Rotary hoe assembly parts boxes 2,165 lbs $ 10,770.00

Section A: Min-Till Folding Rotary Hoe Parts Kit

Model No. Width 3525-101-MT 25’ Min-Till Rotary hoe assembly parts boxes 630 lbs $ 4,950.00

3528-101-MT 28’Min-Till Rotary hoe assembly parts boxes 710 lbs $ 5,065.00

3530-101-MT 30’ Min-Till Rotary hoe assembly parts boxes 790 lbs $ 5,815.00

3534-101-MT 34’ Min- Till Rotary hoe assembly parts boxes 840 lbs $ 6,255.00

3541-101-MT 41’ Min-Till Rotary hoe assembly parts boxes 940 lbs $ 6,920.00

3546-101-MT 46’ Min-Till Rotary hoe assembly parts boxes 1,014 lbs $ 7,400.00

Section B: Folding Toolbar Rotary Hoe

3525-100 25’ 14’10” 8 – 36” 86 3,005 lbs $ 14,060.00

3528-100 28’ 14’ 3” 8 – 40” 96 3,150 lbs $ 15,270.00

3530-100 30’ 15’ 5” 12 -- 30” 104 3,410 lbs $ 15,930.00

3534-100 34’ 17’ 9” 10 – 40” 116 4,065 lbs $ 18,040.00

3541-100 41’ 20’ 9” 12 – 40”, 16 – 30” 140 4,720 lbs $ 21,710.00

3546-100 46’ 25’ 9” 24 – 22” 158 5,180 lbs $ 23,565.00

3554-113 54’ 29” 16 – 40”, 18 – 36” 186 6,060 lbs $ 26,900.00

3560-113 60’ 32’ 5” 18 – 40”, 20 – 36”, 24- 30” 208 8,075 lbs $ 29,895.00

*Requires assembly of long rear min-till arm to rotary hoe. * If ordering helper springs – order 7 less than the required amount. (7 are included in complete kit)

Optional Equipment:

Model No. Description Est Wt List Price 3500-001 Truss 28’ Straight hoe 225 lbs $ 745.00 3500-002 Truss 30’ Straight hoe 250 lbs $ 975.00 3500-108 Toolbar Gauge Wheels (1 pair) equipped with 15” wheels. 187 lbs $ 950.00 Tire not included. Fits 5” x 7” or 7” x 7” toolbar. 3500-107 Wing lock kit. For use with the 3500 Series folding hoes. 11 lbs $ 210.00 3500-135 Rear Parking stand – complete. Fits 7” x 7” toolbar. 112 lbs $ 400.00 For storing the implement folded. 3400-172 Helper springs for added down pressure. One spring fits one wheel. 2 lbs $ 30.00 3400-147 Trash guard to clean hoe wheels. One guard fits one wheel. 2 lbs $ 29.00 3400-170 Min-till Conversion Kit requires one per each rear arm. 9 lbs $ 90.00 3400-111A Rotary Hoe Wheel (black) 14 lbs $ 68.00 3400-111-G Rotary Hoe Wheel (green) 14 lbs $ 70.00

3500 Series Folding Toolbar Rotary Hoes

Must order Hoe Boxes from Section A and the


36


Ships fully assembled Light kit standard

Model Number Description Est Wt. List Price

3650-101 50’ Rotary Hoe Assembly 11,000 lbs. $ 60,000.00



3600 Series Pull-type Rotary Hoes

3600 Pull-type Rotary Hoes do not carry the same discount as like products – call sales for discounts.

• Order manual: 2565-974 Hoe Parts manual 2565-975 Hoe Operator manual

37

Toolbar Dimensions 3715 - 4” x 4” x ¼” x 184” 3728 – 7” x 7” x ¼” x 336” 3721 – 5” x 7” x ¼” x 254” 3730 – 5” x 7” x ¼” x 364” 3725 – 7” x 7” x ¼” x 300” 3741 – 7” x 7” x ¼” x 245” center 7” x 7” x ¼” x 123” wings Section A:

Model No. Description Number of

Wheels

Est. Wt. List Price

3715-101 Hoe assy parts box 30 975 lbs $ 4,215.00

3715-102 Hoe assy parts box 20 855 lbs $ 3,145.00

3721-101 Hoe assy parts box 40 1,300 lbs $ 5,335.00





3741-101 Hoe assy parts box 80 3,816 lbs $12,100.00


3700 Series Rigid Toolbar Hoes

Section B:

Model No. Width Transport Width Number of Wheels Est. Wt. List Price

3400-163 15’ 15’ 30 259 lbs $ 1,220.00

3400-164 21’ 21’ 40 566 lbs $ 1,475.00

3700 Series Folding Toolbar Hoes

Section B:

Model No. Width Transport Width Number of Wheels Est. Wt. List Price

3625-103 25’ 14’ 10” 40 985 lbs $ 4,395.00

3628-103 28’ 14’ 9” 40 1,015 lbs $ 4,460.00

3630-103 30’ 15’ 15” 60 1,043 lbs $ 4,610.00

3741-103 41’ 20’ 9’ 80 1,470 lbs $ 5,620.00

Optional Equipment:

Model No. Description Est Wt List Price 3500-001 Truss 28’ Straight hoe 224 lbs $ 745.00 3500-002 Truss 30’ Straight hoe 279 lbs $ 975.00 3500-108 Toolbar Gauge Wheels (1 pair) equipped with 15” wheels. 187 lbs $ 950.00 Tire not included. Fits 5” x 7” or 7” x 7” toolbar. 3500-107 Wing lock kit. For use with the 3500 Series folding hoes. 11 lbs $ 210.00 3500-135 Rear Parking stand – complete. Fits 7” x 7” toolbar. 112 lbs $ 400.00 For storing the implement folded. 3400-172 Helper springs for added down pressure. One spring fits one wheel. 2 lbs $ 30.00 3400-147 Trash guard to clean hoe wheels. One guard fits one wheel. 2 lbs $ 29.00 3400-170 Min-till Conversion Kit requires one per each rear arm. 9 lbs $ 90.00 3400-111A Rotary Hoe Wheel (black) 14 lbs $ 68.00 3400-111-G Rotary Hoe Wheel (green) 14 lbs $ 70.00

3700 Series Ridge-Till Rotary Hoes

• Order manual: 2565-118 Must order Hoe Boxes from Section A and the


• Center and wing sections constructed of double 5” x 7” bars with 3/8” wall tubing

• Features 5” spacing between front and back bars

• Category 3N, 3, and 4N hitches .

• Center and wing sections constructed of single 7” x 7” bar with 3/8” wall tubing

• Wings fold using 4” x 24” hydraulic cylinders

• Wings lock rigid using over-the-center hydraulic lockdown or can be set to float

• 7° of wing flex

• Category 3N, 3, and 4N hitches

.

Optional Equipment

Model No. Description Est Wt List Price 3000-131 7” x 7” Extension Mounting Kit (used on hinge braces on toolbars) 48 lbs $ 225.00 3800-110 Rear hitch kit 409 lbs $ 1,725.00 3800-111 Hitch extension kit 75 lbs $ 380.00 3800-114 Wing Stand kit 85 lbs $ 530.00 3800-115 7” Offset 4.5” Setback Kit 40 lbs $ 300.00 3831-050 2984 Offset 4” Setback Kit for 2984 Strip Freshener CC (1 per toolbar) $ 350.00 3500-113 Toolbar Gauge Wheels (1 pair) equipped 392 lbs $ 1,650.00 Tire not included. Fits 5” x 7” or 7” x 7” toolbar.

• Center and wing sections constructed of double 5” x 7” or 7” x 7” bars with 3/8” wall tubing

• Wings fold using 3” x 16” or 5” x 24” hydraulic cylinders

• Wings lock rigid using over-the-center hydraulic lockdown or can be set to float or pinned

• 7° of wing flex on 3831 and 3841 sizes

• Features 5” spacing between front and back bars

• Category 3N, 3, and 4N hitches .

Optional Equipment

Model No. Description Est Wt List Price 3000-131 7” x 7” Extension Mounting Kit (used on hinge braces on toolbars) 48 lbs $ 225.00 3800-110 Rear hitch kit 409 lbs $ 1,725.00 3800-111 Hitch extension kit 75 lbs $ 380.00 3800-114 Wing Stand kit 85 lbs $ 530.00 3800-115 7” Offset 4.5” Setback Kit 40 lbs $ 300.00 3500-113 Toolbar Gauge Wheels (1 pair) equipped 392 lbs $ 1,650.00 Tire not included. Fits 5” x 7” or 7” x 7” toolbar.

Model No. Width Rows Transport Width Est Wt List Price

3815-101 15’ 20”,22” or 30” 15’ 1,225 lbs $ 4,000.00


3831-102 30’ 7” 12 – 30”, 8 -- 40” Folds to 16.5’ 2,057 lbs $ 8,800.00

3841-102 41’ 5” 12 – 40”, 16 – 30” Folds to 21.5’ 2,394 lbs $ 9,300.00


3820-101 20’ 20”, 22’ or 30” Folds to 15” 1,920 lbs $ 7,000.00

3831-101A 30’ 7” 12 – 30”, 8 -- 40” Folds to 16.5’ 3,000 lbs $ 15,000.00

3841-101A 41’ 5” 12 – 40”, 16 – 30” Folds to 21.5’ 3,550 lbs $ 16,000.00

3800 Series Heavy-duty Double Frame Non-Folding Toolbar

3800 Series Heavy-duty Single Frame Folding Toolbar

3800 Series Heavy-duty Double Frame Folding Toolbar

38


• 3 quick adjust down pressure settings: 400, 520 & 640 lbs

• 5 easy-to-adjust depth settings from 1.5” to 6”

• Universal mounting bracket kits

• Available with dry or liquid knife

• Available with 18” or 20” diameter blade

• 3” x 16” depth control wheel 18” Coulter with Liquid Knife 20” Coulter with Disc Sealer

Order from Section A or B, C and D to complete

Section A Coulter Assembly with Liquid Knife Est. Wt. List Price

4000-003 18” RH Nutrient-Pro Coulter 149 lbs $ 1,210.00

4000-004 18” LH Nutrient-Pro Coulter 149 lbs $ 1,210.00



Section B Coulter Assembly with Dry Knife





Section C Shank

4000-080 21” Flat Shank 15 lbs $ 100.00

Section D Clamp Kit - includes u-bolts and hardware

4000-040 3 x 3 Diamond Clamp Kit 8 lbs $ 125.00

4000-041 4 x 4 Clamp Kit 9 lbs $ 115.00 4000-042 6 x 4 Clamp Kit 9 lbs $ 115.00 4000-043 2 x 6 Clamp Kit 9 lbs $ 115.00 4000-044 3 x 6 Clamp Kit 9 lbs $ 115.00 4000-045 3 x 7 Clamp Kit 9 lbs $ 125.00 4000-046 5 x 7 Clamp Kit 9 lbs $ 125.00 4000-047 7 x 7 Clamp Kit 13 lbs $ 125.00 4000-048 4 x 6 Clamp Kit 9 lbs $ 115.00

Optional Equipment

4000-020-LH LH Nutrient Pro Tandem Closing System 50 lbs $ 540.00

4000-020-RH RH Nutrient Pro Tandem Closing System 50 lbs $ 540.00

**4000-070 RH Nutrient Pro Disc Sealer, Less Wheel see options below 35 lbs $ 335.00

**4000-071 LH Nutrient Pro Disc Sealer, Less Wheel see options below 35 lbs $ 335.00

**2966-116-ST RH Sharktooth wheel ass’y 8 lbs $ 150.00

**2966-117-ST LH Sharktooth wheel ass’y 8 lbs $ 150.00

**6200-115 Cast Closer wheel ass’y 22 lbs $ 155.00

4000-060 Case 2150 12 Row Bar Kit 1,433 lbs $ 14,510.00

4000-061 Case 2150 16 Row Bar Kit 1,930 lbs $ 19,345.00

4000-101 Coulter Shim (-2º) Use to Reduce Angle in Coulter .30 lbs $ 17.00

4000-260 RH Arm for coulters, planter mount 71 lbs $ 440.00

4000-261 LH Arm for coulter s, planter mount 71 lbs $ 440.00

4000 Series Nutrient-Pro Fertilizer Coulter


39

New

• Order manual: 2565-784 for models

5000-023B, 5000-024B &5000 -035A

• Order manual: 2565-785 for

models 5000-025B/ -028B and -034A

• Order manual: 2565-783 for 5000-022B & 5000-033A • Order manual: 2565-792 for models

5000-029B, 5000-030B & 5000-032B


• Rollers knock over stalks

• Preserves residue cover

• Prevents damage to tires, tracks, wires, and hydraulic hoses on combines, trucks, tractors and implements

• Crushed, knocked-over stalks facilitate quicker residue breakdown

• Quick & easy to install with mounting kits for most corn head models

• Compression spring

• Will not interfere with most header cart trailers R-Rigid and F-Folding

Model No. Description Fits Est. Wt. List Price

5000-005B 6 Row Stalk Devastator Kit 6R30 Case 3206/ 3406/NH98D 657 lbs. $ 5,010.00

5000-006C 8 Row Stalk Devastator Kit 8R30 Case 3208/3408/NH98D 960 lbs. $ 6,680.00

5000-009C 6 Row Stalk Devastator Kit 6R30 Case 2206/NH96C/98C/996 682 lbs. $ 5,010.00

5000-010C 8 Row Stalk Devastator Kit 8R30 Case 2208/2408/NH96C/98C/996 922 lbs. $ 6,680.00

5000-013B 6 Row Stalk Devastator Kit 6R30 Case 1063 657 lbs. $ 5,010.00

5000-014C 8 Row Stalk Devastator Kit 8R30 Case 1083 922 lbs. $ 6,680.00

5000-019C 12 Row Stalk Devastator Kit 12R30 Case 2412/3412/NH98C/98D/996 1,317 lbs. $10,020.00

5000-029B 6 Row Stalk Devastator Kit 6R30 Case 4406/NH980CR 682 lbs. $ 5,010.00

5000-030C 8 Row Stalk Devastator Kit 8R30 Case 4408/NH980CR 922 lbs. $ 6,680.00

5000-032C 12 Row Stalk Devastator Kit 12R30 Case 4412/NH980 Rigid & Folding 1,357 lbs. $10,020.00

5000-036 8 Row Stalk Devastator Kit 8R30 Case 4408, Folding 1,017 lbs. $ 6,680.00

5000-038A 8 Row Stalk Devastator Kit 8R30 Case 4408 (2019 and newer) 892 lbs. $ 6,680.00

5000-025C

6 Row Stalk Devastator Kit

6R30 Deere 643/693/606C/706C/C6R^ and 612C/712C wheel tracks only

657 lbs. $ 5,010.00

5000-026C 8 Row Stalk Devastator Kit 8R30 Deere 608C /708C/843/893/C8R^ 932 lbs. $ 6,680.00

5000-027C 12 Row Stalk Devastator Kit 12R30 Deere 612C/712C/1243/1293/C12R&C12F^ 1,382 lbs. $10,020.00

5000-028C 16 Row Stalk Devastator kit 16R30 Deere 616C/716C & C16R^ Rigid 1,850 lbs. $13,270.00

5000-034B 12 Row Stalk Devastator Kit 12R30 JD 612FC /712FC &C12R & C12F^ 1,272 lbs. $10,020.00

5000-007D 6 Row Stalk Devastator Kit 6R30 Drago 630 682 lbs. $ 5,010.00

5000-017D 8 Row Stalk Devastator Kit 8R30 Drago 830 922 lbs. $ 6,680.00

5000-018D 12 Row Stalk Devastator Kit 12R30 Drago 1230 1,307 lbs. $10,020.00

5000-031C 8 Row Stalk Devastator Kit 8R30 Fantini 1,070 lbs. $ 6,680.00

5000-015C 8 Row Stalk Devastator Kit 8R30 Geringhoff 912 lbs. $ 6,680.00

5000-016C 12 Row Stalk Devastator Kit 12R30 Geringhoff 1,307 lbs. $10,020.00

5000-021C 6 Row Stalk Devastator Kit 6R30 Geringhoff 647 lbs. $ 5,010.00

5000-037 8 Row Stalk Devastator Kit 8R30 Geringhoff Folding 1,067 lbs. $ 6,680.00

5000-023C


6R30 Gleaner 3000 or Hugger 630/ MF 3000 (1988 & newer)/ Challenger CH630

767 lbs. $ 5,010.00

5000-024C


8R30 Gleaner 3000 or Hugger 830/ MF 3000 (1988 & newer)/ Challenger CH830

1,047 lbs. $ 6,680.00

5000-035A 8 Row Stalk Devastator Kit 8R30 Gleaner 3308, AGCO 1,022 lbs. $ 6,680.00

5000-022C 12 Row Stalk Devastator Kit 12R30 Lexion/Capello C512-30 R&F 1,372 lbs. $10,020.00

5000-033B 8 Row Stalk Devastator Kit 8R30 Lexion/Capello C508-30 907 lbs. $ 6,680.00

*Patented NH – New Holland Case – Case IH ^John Deere ALL Models - If using Row Max, Intermeshing, Calmer or 360 knife rolls then order 5000-080 extension kit, quantity required is based on the specific model – call Sales Dept.

Optional Equipment

5000-080^

Extension Kit for use with BT Choppers®. Moves location of rollers back 5” (Requires 2 per roller) Not available for all models – call

Yetter Sales Department.

15 lbs. $ 130.00

5000-081 Head Extension Kit (Includes 2) 15 lbs. $ 420.00

5000-082 Lift Kit 1 lbs. $ 20.00

5000-083 Devastator Lock Up Kit, 6 Row (Deere only) 40 lbs. $ 135.00

5000-084 Devastator Lock Up Kit, 8/12 Row (Deere only) 45 lbs. $ 170.00

5000 Series Stalk Devastator™*

• Order manual: 2565-771 for models 5000-005B thru 5000-021B, 5000-031B & 5000-037

40


• Rollers knock over stalks

• Preserves residue cover

• Prevents damage to tires, tracks, wires, and hydraulic hoses on combines, trucks, tractors and implements

• Crushed, knocked-over stalks facilitate quicker residue breakdown

• Quick & easy to install with mounting kits for most corn head models

• Torsion spring

• Will not interfere with most header cart trailers R-Rigid and F-Folding


5000-040C# 6 Row Stalk Devastator Kit 6R30 Deere 606C/706C/C6R Stalkmaster 532 lbs. $ 5,010.00


+5000-042C# 12 Row Stalk Devastator Kit 12R20 Deere 612C/712C/C12R/1290 Stalkmaster 722 lbs. $ 6,680.00

5000-044C# 12 Row Stalk Devastator Kit 12R30 Deere 612C/712C/C12R Stalkmaster, R & F 932 lbs. $10,020.00

5000-045C# 18 Row Stalk Devastator Kit 18R20 Deere 618C/718C/C18R Stalkmaster, R & F 982 lbs. $10,020.00


5000-047C# 18 Row Stalk Devastator Kit 18R22 Deere 618C/718C/C18R Stalkmaster, R & F 1,027 lbs. $10,020.00

5000-050B 6 Row Stalk Devastator Kit 6R30 Drago GT 597 lbs. $ 5,010.00

5000-051B 8 Row Stalk Devastator Kit 8R30 Drago GT 827 lbs. $ 6,680.00

5000-052B 12 Row Stalk Devastator Kit 12R30 Drago GT, R & F 1,037 lbs. $10,020.00

5000-053B 16 Row Stalk Devastator Kit 16R30 Drago GT 1,600 lbs. $13,360.00

5000-040A-GER 6 Row Stalk Devastator Kit 6R30 Geringhoff, all models except Freedom 592 lbs. $ 5,700.00



5000-044A-GER 12 Row Stalk Devastator Kit 12R30 Geringhoff, all models except Freedom, R & F 1,052 lbs. $11,400.00




5000-042B-CNH 12 Row Stalk Devastator Kit 12R20 CNH 2212, 2412, 3212, 3412 & NH96C, 996 & 98D Rigid Corn Metering

725 lbs. $ 6,680.00

5000-046B-CNH 12 Row Stalk Devastator Kit 12R22 CNH 2212,2412,3212,3412 NH96C, 996 & 98D Rigid Corn Head

650 lbs. $ 6,680.00

5000-060C 6 Row Stalk Devastator Kit 6R30 CNH 2606, 4206, 4406 & NH 99C,980CR Chopping Rigid Corn Head

490 lbs. $ 5,010.00

5000-061C 8 Row Stalk Devastator Kit 8R30 CNH 2608, 4208, 4408 & NH 99C, 980CR Chopping, Rigid Corn Head

652 lbs. $ 6,680.00

5000-062C 12 Row Stalk Devastator Kit 12R30 CNH 2612, 4412, 4412F & NH 99C, 980CF, 980CR Chopping, Rigid & Folding

932 lbs $10,020.00

5000-063C 12 Row Stalk Devastator Kit 12R20 CNH 4412 &NH 9212 Chopping, Rigid Corn Head

722 lbs. $ 6,680.00

5000-090A 1 Row Stalk Devastator Kit Contact sales 70 lbs. $ 1,080.00

*Patented NH – New Holland CNH – Case IH + If ordering for a 1290, must order 6) 5000-070 kits.

#Can be used with Calmer, or Claas. SEE TABLE BELOW FOR QUANTITY OF ADAPTORS TO ORDER WITH DEVASTATOR KIT

5000-070 Devastator Adapter Kit, Deere 90/40 Series & Calmer gear box, Order 1 per mount (see Table below for quantity to order)

18 lbs. $ 150.00

5000-071 Devastator Adapter Kit, Lexion, Order 1 per mount (see Table below for quantity to order)

15 lbs. $ 150.00

Kit Part # # of Adapters Needed




5000-040 4 5000-042 6 5000-044 8 5000-046 6

5000-041 6 5000-043 6 5000-045 10 5000-047 10

Optional Equipment 5000-081 Head Extension Kit (Includes 2) 15 lbs. $ 420.00

5000-083 Devastator Lock Up Kit, 6 Row (Deere only) 40 lbs. $ 135.00

5000-084 Devastator Lock Up Kit, 8/12 Row (Deere only) 45 lbs. $ 170.00

5000 Series Stalk Devastator™*

• Order manual: 2565-969 for models 5000-050B through 5000-053B


5000-040C through 5000-047C


5000-060C through 5000-063C

41

STANDARD FEATURES FOR ALL MODELS • Rolls over and crimps cover crops • Spring-loaded, chevron-patterned rollers

• Mounts to the planter or toolbar frame • Roller sections are equipped with 1-14” square-bore, heavy-duty, non-relubricable, triple-lip sealed bearings • Creates weed mat to preserve residue cover and reduce soil erosion

Contact Yetter Sales Department to discuss mounting to planter and which Cover Crop Kit

is needed before placing order at 800-447-5777.


5500-001A 48inch Cover Crop Kit, includes 5000-167 torsion mount, mounting arms & bearings 210 lbs. $ 2,150.00



*Patented


^5500-031 4-1/4” Short Mount Bracket 3x3, 4x4, 4x6, 5x5, 6x6 and 7x7 50 lbs. $ 350.00

^5500-032 15-5/16” Long Mount Bracket 3x3, 4x4, 4x6, 5x5, 6x6 and 7x7 74 lbs. $ 350.00

5500-033 Diamond Tube Adapter Kit 3.5” Diamond Hitch 50 lbs. $ 350.00

^Order U-bolt mounting hardware from page 27.

5000-187 fits 2x4 and 3x4. Hardware included in Cover Crop Kit. Order 2570-588 U-bolt for 4 x 4 bar. (5000-167 has to be mounted 18” off ground)

5000-032

5000-031

42

5000-167 has to be mounted 17”-19” off the ground.

9-3/8

5500 Series Cover Crop Devastator™* Roller

5000-033








Cast Spike Wheel

6200-001 Cast Spike Close Wheel Kit 22 lbs. $ 260.00

6200-002 Scraper Kit for 6200-001 and 6200-003 4 lbs. $ 54.00

6200-003 Cast Spike Close Wheel Kit for JD 7200/7300 22 lbs. $ 255.00

6200-010 50 Series Plus spike close wheel, 13” wheel (JD Serial # up to 3834) 10 lbs. $ 120.00

6200-011 60 / 90 Series Plus spike close wheel, 13” wheel 10 lbs. $ 120.00

6200-020 LH adaptor for 50 Series, 13” wheel 10 lbs. $ 120.00

6200-021 RH adaptor for 50 Series, 13” wheel 10 lbs. $ 120.00

Hardware Kits

6200-143 Stud wheel kit for use with 6200-001 on JD 7000/7100, ’92 older Kinze 1 lb $ 25.00

6200-181 Closing Wheel mounting hardware kit for Twister Poly Wheels 2 lbs. $ 20.00

6200-183 Stud wheel kit for use with 6200-005 on JD 7000/7100, ’92 older Kinze 1 lb. $ 25.00

Paddle Wheel

6200-004 Paddle wheel for use JD Maxemerge Plus, XP, Pro Kinze-’93 to current, White 6000 & 8000 with v-closing wheels

20 lbs. $ 260.00

Twisted Poly Wheel

Twister Poly Wheel Boxed Kits

6200-005-Box4 Twisted Poly Spike Closing Wheel – 4 Rows – Boxed shipment 25 lbs. $ 900.00

6200-005-Box8 Twisted Poly Spike Closing Wheel – 8 Rows – Boxed shipment 45 lbs. $ 1,800.00

6200-006-Box4 Twisted Poly Spike Insert Kit – 4 Rows – Boxed shipment 15 lbs. $ 540.00

6200-006-Box8 Twisted Poly Spike Insert Kit – 8 Rows – Boxed shipment 27 lbs. $ 1,080.00

6200-006-Box12 Twisted Poly Spike Insert Kit – 12 Rows – Boxed shipment 39 lbs. $ 1,620.00

Serrated Closing Disc

6000-013A Serrated Closing Disc Kit, CNH 20 lbs. $ 110.00

6000-014A Serrated Closing Disc Kit, JD 20 lbs. $ 110.00

6000-021 9” Serrated Closing Disc Kit, CNE 2150 20 lbs. $ 110.00

6000-022 9” Sharktooth™ Closing Disc Kit, CNH 2150 20 lbs. $ 110.00

Closing Wheel Assembly

6000-002ℵ Quick-adjust “V” Close Wheel for JD 7000 and 7100 25 lbs. $ 225.00

6200-104 Quick-adjust “V” Close wheel for JD 7000 and 7100 less the wheels 11 lbs. $ 105.00

6200-184 V-Closing wheel kit JD 7200/7300 less the wheels 11 lbs. $ 105.00

6200-109 Quick-adjust “V” Close Wheel kit for CNH vacuum and Cyclo planters (will not work with plate planters)

25 lbs. $ 295.00

ℵ Not recommended for use with cast iron closing wheels.

6200-005 Twisted Poly Spike Closing Wheel Kit for use JD Maxemerge Plus, XP, Pro Kinze-’93 to current, White 6000, 8000 and 9000 with v-closing wheels (Bulk shipment – see below for boxed units)

7 lbs. $ 225.00

6200-006 Twisted Poly Spike Wheel Insert Kit fits same as 6200-005 (Bulk shipment- see below for boxed units)

3 lbs. $ 135.00

6200-007 Short Twisted Poly Spike Closing Wheel kit fits JD Maxemerge Plus, XP, Pro Kinze-’93 to current, White 6000, 8000 and 9000 with v-closing wheels (used for shallow planting depth)

5 lbs.

$ 225.00

6200-008 Short Twisted Poly Spike Insert Kit (used for shallow planting depth) 3 lbs. $ 135.00

6200-009 Twisted Cast Spike Closing Wheel Kit for use JD Maxemerge Plus, XP, Pro Kinze-’93 to current, White 6000, 8000 and 9000 with v-closing wheels

35 lbs. $ 260.00

6200-030 CNH 1200 Series Twister Conversion Kit with Twisted Poly Spike Wheels 15 lbs. $ 300.00

6200-031 CNH 2000 Series Twister Conversion Kit with Twisted Poly Spike Wheels 15 lbs. $ 375.00

6200-053 CNH 1200 Series Conversion Kit, less wheels 8 lbs. $ 75.00

6200-054 CNH 2000 Series Conversion Kit, less wheels 8 lbs. $ 150.00

6000 / 6200 Series Closing Wheels

(JD Serial #’s 3900 and up)


43



Firming Wheel Assembly

6200-022 Firming Wheel for use with Kinze Evolution, Kinze, JD 7000 50 lbs. $ 485.00

6200-023 Firming Wheel for use with JD 1700, 7200 and 7300 50 lbs. $ 485.00

6200-024 Firming Wheel for use with White 8000 50 lbs. $ 485.00

6200-025 Firming Wheel for use with White 9000 50 lbs. $ 485.00

6200-026 Firming Wheel for use with Harvest International 50 lbs. $ 485.00

6200-027 Firming Wheel for use with Kinze 4900 50 lbs. $ 485.00

Interchanger 6200-050 Interchanger kit for Kinze with bolt on closing wheels, Yetter

& White 6000 & 8000 2 lbs. $ 36.00

6200-051 Interchanger kit for JD 1700 2 lbs. $ 36.00


• Heavy-duty 3/8” square twisted link chain • Squeeze together connections

• Fits most popular planters

Model No. Description Est Wt List Price 6200-108* Square twisted link drag chain 6 lbs $ 42.00

*Certain planters may require drilling a hole.

• Shield allows for quick storage of drag chain when not needed

• Shield provides extra support for drag chain arms & prevents chain from contacting wheels

Model No. Description Est Wt List Price 6200-040 Drag Chain Shield Assembly 6 lbs $ 49.00


• Replace standard factory OEM’s gauge wheel

• Allows wet soil and debris to flow through spike wheel

Model No. Description Est Wt List Price 10000-114^ Cast spoke designed with 4.5” x 16” gauge wheel tire and 40mm

(5203KYYZ) bearing. Fits John Deere MaxEmerge™ XP, XP Pro, MaxEmerge™ 5, Exact Emerge™, Kinze® 1993 and after, White 8000, 9000, John Deere drills 750, 1560, 1590, 1690, 1850, 1860, 1890, 1895, 1990, CNH 1200 and 2000 Series^, GP YP, 15, 25 Series with 15”opener, Monosem with “bolt on” wheels

18.2 lbs $ 180.00

2570-786^ Cast spoke designed with 3” x 16” gauge wheel tire and 40mm (5203KYYZ) bearing. Fits John Deere MaxEmerge™ XP, XP Pro, MaxEmerge™ 5, Exact Emerge™, Kinze® 1993 and after, White 8000, 9000, John D, CNH 1200 and 2000 Series^, ^, GP YP, 15, 25 Series with 15”opener, Monosem with “bolt on” wheels

14.9 lbs $ 170.00

^Hardware needed to fit: CNH 1200 will require 1 of 2526-455 (washer) CNH 2000 will require 1 of 2526-455(washer) and 1 of 2502-812 (M16 x 90 bolt) ^Deere units need the 2570-790 to prevent the rim from contacting the double disc opener hub.

Optional Equipment


2570-790 Gauge Wheel Arm Stop (1 per row) .5 lb $ 15.00

6200 Series Drag Chain

Spoke Planter Gauge Wheels


New

44


• If you need additional manuals: 2565-376


• 180° flat fold

• Breakaway hinge to help prevent damage from obstructions

• 13-5/8” or 16” Notched blade

• Adjustable sequence valve

• Reversible hub allows pulling or pushing the marker disc through the field

• 3000 psi cylinders

Order from Section A and B: Section A:

Part Number Description Est. Wt. List Price

6150-007 15’ – 20’ Marker shipping assembly includes: hose kit, marker blade box and 15’-20’ arms

640 lbs $ 3,700.00

6150-008A 24’ Marker shipping assembly includes: hose kit, marker blade box and 24’ arms 650 lbs $ 4,650.00

6150-009A 30’ Marker shipping assembly includes: hose kit, marker blade box and 30’ arms 900 lbs $ 5,100.00

6150-010A 35’ Marker shipping assembly includes: hose kit, marker blade box and 35’ arms 920 lbs $ 5,300.00 Section B:

Part Number Description Est. Wt. List Price

6001-016 JD 1520/1530 Drill / fits 5” x 7” toolbar 76 lbs $ 375.00

6001-018 JD 455 Drill / fits 6” x 6” toolbar 60 lbs $ 280.00

6001-022 Tye Series V and fits 7” x 7” toolbar / Planter mount 98 lbs $ 405.00

6001-026 7” x 7” Cultivator 55 lbs $ 255.00

6001-028 JD 750/ 1560/ 1590 Drill for 15’ and 20” Drill / fits 4” x 6” toolbar 46 lbs $ 255.00

6001-033 7x7/ 8x8 mount kit 105 lbs $ 550.00

6001-042 Case IH 5500 90 lbs $ 750.00

6001-120 GREAT PLAINS 74 lbs $ 320.00

6001-195 Case IH 5200/5400 / fits 7” x 7” toolbar 82 lbs $ 300.00

6001-198 JD 750/ 1560 for 30’ Drill / fits 4” x 6” and 4” x 4” toolbar 50 lbs $ 300.00

6100-108 Great Plains 1500 & 2000 / fits 6” x 6” toolbar 67 lbs $ 330.00

6100-110 7” x 7” toolbar / Planter mount 88 lbs $ 430.00

6150-091 White 6000 mount kit / fits 7” x 7” toolbar 67 lbs $ 440.00

6150-092 Marker mount kit, CNH 500/500T 31 lbs $ 700.00

6150-101 DMI / fits 4” x 6” toolbar 73 lbs $ 380.00

6150-162 JD 1690/1890/1990 and N530C Drill 168 lbs $ 850.00 6001-022 6001-026 6100-110 6150-101

Optional Equipment

Model No. Description Est. Wt List Price 6001-602 A Notched Marker Disc Kit. Fits JD 7000, 7100, 7200, 7300 20 lbs $ 250.00 6100-334 Marker Arm Weight (2 per set of Markers) 8 lbs $ 36.00 6150-111 Hold down kit for standard markers 5 lbs $ 45.00 6150-155 Heavy Duty Notched Disc Kit 36 lbs $ 440.00 6150-165 Heavy Duty Marker extension bracket kit for 1690/1860/1890 22 lbs $ 105.00

6150 Series Hydraulic Flat Fold Markers

45



• Heavy-duty cast hitch hooks • Dual 5” x 5” coulter mounting toolbars

• Coulters adjustable for opener spacing • Built-in Weight Transfer System with parallel lift

• 3-point quick hitch (ASAE Standard) • Transport locks

• Four 11L x 15” 8-ply tires with tubes • 3000 psi cylinders

• Swivel/Non-Swivel coulter model • On-the-go hydraulic coulter depth adjustment

• Requires closed center tractor

Model No. Transport

Width

Row

Spacing Number

of

coulters

Coulter Blade Description Est. Wt. List Price

6315-S11-SW 15’ 11 18” Shallow-Wave (13 Wave) 3476 lbs $18,000.00

6315-S18-W 15’ 10” 18 18” Wavy (8 Wave) 3871 lbs $20,000.00

6315-S18-SW 15’ 10” 18 18” Shallow-Wave (13 Wave) 3871 lbs $20,000.00

6315-S18-MW 15’ 10” 18 18” Multi-Wave (25 Wave) 3871 lbs $20,000.00

6315-S22-W 15’ 8” 22 18” Wavy ( 8 Wave) 3968 lbs $21,000.00



6315-S24-W 15’ 7.5” 24 18” Wavy (8 Wave) 4166 lbs $21,500.00

6315-S24-SW 15’ 7.5” 24 18” Shallow-Wave ( 13 Wave) 4166 lbs $21,500.00

6315-S24-MW 15’ 7.5” 24 18” Multi-Wave (25 Wave) 4166 lbs $21,500.00

6315-S26-W 15’ 7” 26 18” Wavy (8 Wave) 4187 lbs $22,000.00

6315-S26-SW 15’ 7” 26 18” Shallow-Wave ( 13 Wave) 4201 lbs $22,000.00

6315-S26-MW 15’ 7” 26 18” Multi-Wave ( 25 Wave) 4201 lbs $22,000.00 6

6320-S15-SW 20’ 15 18” Shallow-Wave (13 Wave) 3511 lbs $20,000.00

6320-S24-W 20’ 10” 24 18” Wavy ( 8 Wave) 4201 lbs $22,000.00

6320-S24-SW 20’ 10” 24 18” Shallow-Wave ( 13 Wave) 4201 lbs $22,000.00

6320-S24-MW 20’ 10” 24 18” Multi-Wave ( 25 Wave) 4201 lbs $22,000.00

6320-S30-W 20’ 8” 30 18” Wavy ( 8 Wave) 4546 lbs $24,000.00



6320-S32-W 20’ 7.5” 32 18” Wavy ( 8 Wave) 4715 lbs $24,500.00

6320-S32-SW 20’ 7.5” 32 18” Shallow-Wave ( 13 Wave) 4715 lbs $24,500.00

6320-S32-MW 20’ 7.5” 32 18” Multi-Wave ( 25 Wave) 4715 lbs $24,500.00

6320-S34-W 20’ 7” 34 18” Wavy ( 8 Wave) 4814 lbs $25,000.00



6320-S40-W 20’ 6” 40 18” Wavy (8 Wave) 5361 lbs $26,000.00



Base Coulter Cart Only

6300-001 Coulter cart only includes transport wheels, hydraulics, and implement 1723 lbs $ 10,200.00 attaching 3-point hitch

Optional Equipment

2999-114 Basic Coulter Assembly, less blade 60 lbs $ 410.00 Call Yetter Sales Department for prices on other sizes and blade choices available.

6300 Series Coulter Cart

46


STANDARD FEATURES FOR ALL MODELS • Wheel Tire (Chevron)

• Scraper attachment bundle

• Parallel Linkage Stop

• Baffle Plate

• Corn Meter for Large Seed Hopper

• Hopper Assembly

• Plates not provided

ORDER FROM A, B AND C TO MAKE COMPLETE MACHINE

Section A


6010-150 Planter Unit 113 lbs $ 1,775.00

Section B Order One Model No.


^6010-004A Cat I/II Toolbar assembly, 3 or 4 Rows (10’ toolbar) 152 lbs $ 920.00

6010-005A Cat I/II Toolbar assembly, 1 or 2 Rows (5’ toolbar) 110 lbs $ 810.00

^Recommend ordering 6010-140 in Optional Equipment

Section C Order One Per Each Row Unit


2996-121 4” x 4” U-bolt kit 3 lbs $ 30.00

Optional Equipment

^6010-140 SMV Kit (for 4 x 4 bar) lbs $ 39.00


1300-175 Seed Chute Assembly 29 lbs $ 200.00

1300-413 Wireless Remote / Receiver for Seed Jet II 1 lb $ 250.00

71 Series Planter Unit

47

71 Series Planter Unit does not carry the same discount as other whole good products – call sales for discounts.

1300 Series Bulk Seed

Section A: Head Cart

Shipping Stand Required


• Designed for Corn Heads (with or without Yetter Stalk Devastator™ or Stalk Stompers) Platforms and Drapers

• DOT reflective tape ● Fenders on front tires

• Rear brakes at each axle electric ● 2 Adjustable saddle brackets

• Telescoping tongue with safety chains ● 7,000 pound axles

• Powder-coated finish ● Adjustable alignment indicators

Order from Section A & B

Model No. Model No. Description Est. Wt. List Price

8500-027-S 8500-027-T Head Cart trailer, 27’, Assembled Complete 3,360 lbs. $15,700.00

8500-032-S 8500-032-T Head Cart trailer, 32’, Assembled Complete 4.405 lbs. $18,700.00

8500-038-S 8500-038-T Head Cart trailer, 38’, Assembled Complete 4.670 lbs. $19,700.00



**Contact Yetter Sales Department @ 800-447-5777 with any questions (Short tires recommended with corn heads and Tall tires recommended with platforms and drapers)

** Contact Yetter Sales Department @ 800-447-5777 for correct part number

* Either CPU assembled to be pulled or are shipped on flatbed F.O.B. Macomb, IL

Cart sizes: 27’, 32’, 38’, 43’ and 48’


8500-144 2-5/16” Ball Hitch Kit 10 lbs. $ 150.00

8500-166 Hitch Pin Kit 14 lbs. $ 125.00


8500-001 Alignment Marker Pole Kit 5 lbs. $ 170.00

8500-150 Spare Tire Bracket Kit 12 lbs. $ 60.00

8500-151 2” Lift kit. (Use only if using the Tall tire option) 26 lbs. $ 950.00

**8500-228 Head Rest “Short” (Combines with lower feeder house lift height) 22 lbs. $ 250.00

**8500-232 Head Rest “Tall” (Combines with higher feeder house lift height) 37 lbs. $ 250.00


8500-104* Head Cart Shipping Stand Kit (Order one per cart stacked) Can stack 3 high for truck load –tires may not be installed for shipping.

130 lbs. $750.00

8500 Series Head Cart Trailers


48

Optional Equipment

Short –Tire-27” Tall –Tire-31”

Section B: Hitch Kit

• Order manual: 2565-


Eliminates compaction caused by planter and tractor weight Fully adjustable down pressure system 9” ground-driven tines rotate to fracture the compacted soil

9010 FM30 Hydraulic

Specifications:

• 4 Independent TrackTill® tillage rollers frame mount ● 4 hours estimated install time

• Includes mounting hardware for 7 x 7 toolbar ● 30” row widths

• Adjustable valve to change settings easily

*Call for other toolbar sizes. Designed for DB, Drawn Frame Planters; contact Yetter sales 800-447-5777

9010 FM30 Pneumatic

Specifications:




*Call for other toolbar sizes. Designed for DB, Drawn Frame Planters; contact Yetter sales 800-447-5777

9010 FM20 Pneumatic

Specifications:




9010 CM30 Hydraulic

Specifications:

• 4 Independent TrackTill® tillage rollers that mount to toolbar for CM Planters

• 6 hours estimated install time ● 30” row widths

• Hydraulic adjustable down pressure ● Optional Rear Hitch

Designed for Central fill, Narrow Transport Planters: (JD 1770/1775NT, Case IH 1200/1250, Kinze 4900, AGCO 9800 Series) Contact Yetter sales 800-447-5777

Model No. Base Est. Wt. List Price

9010-004 Tracktill® FM30 Hydraulic Assemblies 1,185 lbs $19,200.00

9010-021 Hydraulic Kit 33 lbs $ 965.00


9010-001 Tracktill® FM30 Pneumatic Assemblies 1,185 lbs $19,200.00

9010-020 Pneumatic Kit 15 lbs $ 600.00


9010-002 Tracktill® FM20 Pneumatic Assemblies 1,325 lbs $19,500.00

9010-020 Pneumatic Kit 15 lbs $ 600.00


9010-003 Tracktill® CM30 Hydraulic Assemblies 1,165 lbs $ 18,800.00

9010-010 Tracktill® CM30 Mounting Frame 735 lbs $ 3,000.00

9010-015 Tracktill® CM Rear Hitch Kit 165 lbs $ 600.00

9010-021 Hydraulic Kit 33 lbs $ 1,000.00

9010 Series TrackTill®

49

Optional Equipment

9010- Shield 30” for 1 row – (Call for details) $ 600.00 9010- Shield 20” for 1 row – (Call for details) $ 600.00 9010-025 Cab Control Lift Lock Kit $ 725.00 9010-030 Hydraulic Conversion Kit $ 785.00 9010-216 Bolt on Step $ 255.00

50


• High application speeds with minimal soil disturbance for fall, pre-plant and side-dressing application

• Tube kits for applying liquid, dry or anhydrous

• All Cast design

• Spring loaded knife with carbide tip for extended wear

• 22.6” blade set at 4° angle

• Fits 4x4, 4x6, 5x7, 6x4, 7x7 toolbar sizes

• Sharktooth® Wheel Closer standard ORDER from SECTIONS: A, B, C Section A:

Order Model No. Description Est. Wt. List Price

10000-001A-LH LH MAGNUM, w/ Walking Tandem*, fits toolbars 4,5,6,7 wide Unv. Mt. 380 lbs $ 3,325.00

10000-001A-RH RH MAGNUM, w/ Walking Tandem*, fits toolbars 4,5,6,7 wide-Unv. Mt. 380 lbs $ 3,325.00

10000-002A-LH LH MAGNUM, w/ Walking Tandem*, fits toolbars 4” wide, Short Mt. 375 lbs $ 3,300.00

10000-002A-RH RH MAGNUM, w/ Walking Tandem*, fits toolbars 4” wide, Short Mt. 375 lbs $ 3,300.00

10000-003A-LH LH MAGNUM, w/o Walking Tandem*, fits toolbars 4,5,6,7 wide Unv. Mt. 355 lbs $ 2,975.00

10000-003A-RH RH MAGNUM, w/o Walking Tandem*, fits toolbars 4,5,6,7 wide Unv. Mt. 355 lbs $ 2,975.00

10000-004A-LH LH MAGNUM, w/o Walking Tandem*, fits toolbars 4” wide Short Mt. 345 lbs $ 2,950.00

10000-004A-RH RH MAGNUM, w/o Walking Tandem*, fits toolbars 4” wide Short Mt. 345 lbs $ 2,950.00 Section B:


2987-040-L LH NH3 (3/8”)Tube Kit .395 lbs $ 29.00

2987-040-R RH NH3 (3/8”) Tube Kit .395 lbs $ 29.00

2987-041-L LH NH3 w/ Liquid (3/8” Dual) Tube Kit .697 lbs $ 42.00

2987-041-R RH NH3 w/ Liquid (3/8” Dual) Tube Kit .697 lbs $ 42.00

2987-042-L LH NH3 w/ Vapor (3/8” & 3/4”) Tube Kit .954 lbs $ 48.00

2987-042-R RH NH3 w/ Vapor (3/8” & 3/4”) Tube Kit .954 lbs $ 48.00

2987-043-L LH NH3 w/ Liquid & Vapor (3/8” Dual & 3/4 ” Single) Tube Kit 1.044 lbs $ 62.00

2987-043-R RH NH3 w/ Liquid & Vapor (3/8” Dual & 3/4” Single) Tube Kit 1.044 lbs $ 62.00

2987-044-L LH Vapor Only (3/4” )Tube Kit .455 lbs $ 34.00

2987-044-R RH Vapor Only (3/4”) Tube Kit .455 lbs $ 34.00

2987-046 Liquid (1/2” Single) Tube Kit .425 lbs $ 34.00

2987-047 Liquid (1/2” Dual) Tube Kit .850 lbs $48.00

2987-050 Dry (1-1/2”)Tube Kit 1.159 lbs $ 48.00

2987-051 Dry w/ NH3 (1-1/2” & 3/8”) Tube Kit 1.404 lbs $ 60.00

2987-052 Dry w/ NH3 & Vapor (1-1/2” & 3/8” & ¾”) Tube Kit 1.987 lbs $ 98.00

2987-053 Dry (1-1/2”) Tube Kit 2.55 lbs $ 51.00

10000-050-LH LH 10000 Magnum™ Dry Tube Assembly kit 1.5 lbs $ 70.00

10000-050-RH RH 10000 Magnum™ Dry Tube Assembly Kit 1.5 lbs $ 70.00 Section C:

Model No. Description Est Wt. List Price

10000-011 4” Tall Toolbar Mount Hardware Kit 4 lbs $ 48.00

10000-012 5” Tall Toolbar Mount Hardware Kit 4.1 lbs $ 48.00



Optional Equipment: 10000-020-LH LH Walking Tandem* Wheel Conversion Kit 28.5 lbs $ 365.00

10000-020-RH RH Walking Tandem* Wheel Conversion Kit 28.5 lbs $ 365.00

^^10000-080-LH LH Residue Manager Mount bracket for 10000 Series Magnum 20 lbs $ 155.00

^^10000-080-RH RH Residue Manager Mount bracket for 10000 Series Magnum 20 lbs $ 155.00

10000-099 2” Drop Down Kit (Wheel tracks for Magnum) 17 lbs $ 95.00

*PATENT PENDING

^^SEE PAGE 14 FOR RESIDUE MANAGER OPTION

10,000 Series Magnum Fertilizer Coulter

Order manual: 2565-957

51

APPENDIX

6/3/21 Updated price on page 9.

6/15/21 Please print new book – several pages with updated part numbers.

6/18/21 Updated part numbers on page 48.

6/22/21 Added new part number to page 43.

8/3/21 Updated pricing on pages 18 and 23.

8/10/21 Updated product code and pricing on page 29.

8/17/21 Updated pricing on page 21.

9/2/21 Updated part numbers and pricing on pages 40, 41 & 42.

9/6/21 Updated pricing on page 48.

9/21/21 Added page 14A.

10/8/21 Updated pages 25 & 26.

whole goods price list - yetterco.com

Documents