where the dust settles… - united truck & equipment ... · photography & design: ...

®

Where the Dust Settles…

®

Catalog XI

TABLE OF CONTENTS

2 www.watertrucks.com • 800.600.TANK • 602.253.7739

©2016 United Truck & Equipment, Inc. All rights reserved. Any reproduction (including electronic) without prior written permission is forbidden. photography & design: www.crosbymultimedia.com contributing photography: Trauscht Media, LLC

UNITED TRUCK SYSTEMS & KITS ........................................... 2-15

About UnitedBuilt Equipment ................................. 2-3

Vision Tank Information .............................................4

Conventional Tank Information ..................................5

Warranty & Tank Coatings .........................................6

Factory Installed Systems ..........................................7

Drop On R-Kit ..............................................................8

5 Air Valve U-Kit ..........................................................9

Hook/Roll Off Tank & Flusher System ......................10

Slide In Tank & Tanker Trailer ..................................11

Off & On Highway Tank Systems..............................12

Fire Tender System ...................................................13

TANK INFORMATION & PARTS .............................................. 14-16

UnitedBuilt System Options ............................... 14-15

UTE Gravity Drop, Gravity Bar & Pressure Bar ........16

TANK INFORMATION & PARTS .............................................. 17-18

Hydrant Fills & Accessories .....................................17

Manways & Accessories ..........................................17

Quick Dump Valves ..................................................17

Tank Mounting Hardware & Skirtboard ...................18

Mudflaps, Sight Gauge & Reel Mounts ....................18

LIGHTS ........................................................................................19

Harnesses & Brackets ..............................................19

DOMESTIC & IMPORTED WATER PUMPS & REPAIR PARTS .......21

BERKELEY WATER PUMPS & REPAIR PARTS ....................... 20-24

Pump Rotation Guide ...............................................20

B3ZRM/B3ZRMS/B4ZRKS .........................................22

B6Z/B4ERBMS/B3JRMBMS ......................................23

Hydraulic Drive B3, B4, B6 .......................................24

FRANKLIN WATER PUMPS ..........................................................25

XS-9/XS-13 ...............................................................25

FMIH-40 ....................................................................26

ENGINE DRIVE WATER PUMPS....................................................26

AIR VALVES, NOZZLES, & REPAIR PARTS ............................. 27-31

UTE Air Operated Sprayhead Kits.............................27

Spray Head Nozzles ..................................................28

UTE AV1100 Valve, BC2410 SHV & Repair Parts ......29

UTE AV323G Inline Valve & Repair Parts ..................30

Netafim & Bermad Inline Valves & Repair Parts .....30

UTE AV5293, Cla-Val & Repair Parts ........................31

UTE BC2403(H) SHV & Repair Parts .........................31

Normally Closed Valve ..............................................31

CONTROLS FOR AIR, ELECTRIC, & MANUAL VALVES ..................32

AIRLINE – FITTINGS, REGULATORS, VALVES ..............................33

BUTTERFLY, GATE & BALL VALVES ....................................... 34-36

Air Operated Butterfly Valves & Actuators ..............34

Electric Operated Butterfly Valves & Actuators .......35

Manual Butterfly, Gate & Ball Valves .......................36

ELKHART MONITORS & CANNONS ....................................... 37-38

Electric Sidewinder 8494 & Repair Parts ................37

Manual Vulcan 8500-02 & Repair Parts ...................38

HOSE REELS, HOSES, NOZZLES/STRAINERS ........................ 39-42

American Reels & Repair Parts ................................39

COX Reels & Repair Parts .........................................40

Camlocs, Hose Barbs, Swivels .................................41

Hoses, Strainers/Foot Valves ...................................42

Hoses Nozzles & Clamps ..........................................42

PLUMBING PARTS & REPLACEMENT PARTS ........................ 43-46

Gaskets & Repair Kits ..............................................43

Nipples & Couplings .................................................44

Elbows & Flanges .....................................................45

Tees, Crosses, Reducers, Caps/Plugs ......................46

UTE ASSEMBLIES ................................................................. 47-48

Bypass, Articulated Spray, Rear Bar, Front Bar .......47

Hose Reel, Suction Fill, Elkhart Cannon ...................48

HYDRAULICS ......................................................................... 49-50

Motors, Pumps, Valves, Adapters ............................49

Hydraulic Tank Kits, Filters ......................................49

PTOs, U-Joints, Yokes, Diagrams .............................50

PLUMBING KITS & DIAGRAMS ............................................. 51-54

Pre-Assembled Plumbing Kits .................................51

Plumbing Kits ...........................................................52

Standard 4X3, Standard 4X3 Suction Diagrams .....53

Tank Mounting Diagrams .........................................53

Plumbing Photos ......................................................54

DECALS .......................................................................................55

FORMS AND INFORMATION .................................................. 56-58

Truck Specification Form .........................................56

UnitedBuilt System Operation & Maintenance ........57

UnitedBuilt System Notes Page ...............................58

TABLE OF CONTENTS

http://www.watertrucks.com

ABOUT UNITED TRUCK & EQUIPMENT, INC.

www.watertrucks.com • 800.600.TANK • 602.253.7739 3

UNITEDBUILT EQUIPMENT®QUALITY DESIGN & CRAFTSMANSHIP

SINCE 1947United Truck & Equipment, Inc. is a manufacturer and leading nationwide supplier of mobile fluid spray systems for a wide range of applications.

We build our tanks from the ground up, starting with A36 sheet steel with a minimum thickness of 3/16”. Tank shells are rolled either to a modified ellipse or a modified trapezoid with a radius bottom, yielding the desired volume distribution and rear view visibility. All shell seams are welded 100% on both inside and outside of tank.

2X BOTTOM THICKNESSTanks of 3000 gallons and above are reinforced with a full-length belly plate, effectively doubling the bottom thickness of the tank. Bottom runner skids are fully welded to the bottom of the tank for precise interface to the chassis frame. Between truck frame and tank runner, a vulcanized rubber wear pad dif-fuses stress and surge even further.

EXTERIOR & INTERIOR PROTECTIONAfter the tank construction is complete, our coating department stands ready to apply treatments according to customer needs. Exteriors can be powder-coated in our industrial oven, either with our stock fleet white or a customized color. Internally, to protect against rust, we can line our tank interiors with high-grade epoxy, further ensuring multi-year service.

BULKHEADS & BAFFLESOur tank design distributes the forces of hauled water evenly throughout the vessel. Bulkheads and baffles are curved and fitted into the shell of the tank which match or exceed the shell thickness.

All contact between heads and shell is welded 100% on both sides. To suppress fluid surge during stops and starts, depending on capacity and dimension we baffle our tanks with ported and curved lateral steel sheets. Internally, our tanks contain no unbaffled chamber exceeding 1700 gallons.

SETTING THE BAR HIGHOur specifications do not merely meet industry standards, they exceed them. Over years of quality manufacturing, our specifications have become the standard, offering not only safety of design, but a durability so stout that United Truck can confidently offer a limited five-year tank construction warranty.

Return to Table of Contents


ABOUT UNITED TRUCK & EQUIPMENT, INC.


UNITEDBUILT EQUIPMENT®QUALITY DESIGN & CRAFTSMANSHIP

TAILORED PERFORMANCEInformed by over 30 years of experience with a myriad of chassis specifications, our shop installs the optimum interface between spray system and chassis - most often a power-take-off, customized to the combination of transmission and pump, spinning the impeller to the desired efficiency for both volume and pressure.

ON YOUR TRUCK OR OURSWe can supply the chassis, or tailor a system to a truck the customer provides. With transmission and axle information, we can build an uninstalled tank spray system in kit form, customized to those specifications.

MAXIMIZED SERVICE LEVELOur inventory warehouse supports not only our UnitedBuilt® tanks and trucks, but parts of almost every manufacture. We pride ourselves on maximizing our service level for repair and replacement material for water trucks, maintaining a 96% fill rate on stock parts orders.

MAX OUTPUT & MIN WATER ‘HAMMER’Our fabrication department builds fluid spray systems that work in functional concert with tank and truck. All pressurized lines are at least schedule 40 black pipe and professionally plumbed for unrestricted water flow, using air-actuated water valves and spray heads of our own manufacture, specifically designed to maximize output and minimize water ‘hammer’ throughout the system.

As an alternative to the strict PTO system, United also has extensive experience installing hydraulically driven spray applications. Mechanical and lighting specs are tailored to the individual truck, and we can adjust the frame length or even relocate certain chassis components to accommodate both the tank and plumbing.

JOIN THE ELITEUnited Truck is equipped to provide the most functional, precisely tailored, and complete mobile spray system possible for your application.



VISION TANK FEATURES, DIMENSIONS & CAPACITIES


Full Welds - Inside & Out

Mounting Skids/Runners

Curved Baffles

Shape: Modified trapezoid with flat sides for low profile and a rounded bottom.Belly Plate: Full steel belly plate along bottom of 3000 gallon and larger tanks.Construction: Full penetration welds, all seams welded 100% on both sides.Heads: Curved and fitted with 4” - 6” offset welded 100% inside and out.Baffle(s): Curved and fitted with 4” - 6” offset; 20” crawl hole and 6” flow holeson top, sides and bottom.Mounting Skids: Heavy duty U-shaped skids with full continuous weld to tank.Manway: Hinged non-sealing 25″ lid with 10″ anti-slosh ring.Ladder: 3⁄4” pipe construction.Sight Gauges: Clear flexible tubing mounted on front and rear of tank.Light Brackets: Standard DOT: LED marker, stop and clearance sealed LED beam lights.Fenders: Welded to tank, constructed from 12 gauge steel.

6D 60 96 243 6V 66 102 285 6G 72 102 310

STYLE HEIGHT WIDTH GALLONS PER FOOT

VISION TANK FEATURES

VISION TANK DIMENSIONS & CAPACITIES

Quality Craftsmanship



CONVENTIONAL TANK FEATURES, DIMENSIONS & CAPACITIES


Full Welds - Inside & Out

Mounting Skids/RunnersCurved Baffles

SK 41.5 96 170SU 40 100 170SH 51 80 178SX 45 102 195SW 45 100 196SE 53 88 204SC 53 96 227SJ 57 96 242SD 60 96 257SA 60 98 276SR 64 100 290SV 66 102 310SG ≤16’ 72 100 325M3 ≥17’ 72 100 325M4 78 102 385M5 76 120 425M6 96 144 590M7 96 168 691

GALLONS STYLE HEIGHT WIDTH PER FOOT

CONVENTIONAL TANK FEATURES

CONVENTIONAL TANK FEATURES

Shape: Modified ellipse with flat sides for low profile and a rounded bottom.Belly Plate: Full steel belly plate along bottom of 3000 gallon and larger tanks.Construction: Full penetration welds, all seams welded 100% on both sides.Heads: Curved and fitted with 4” - 6” offset welded 100% inside.Baffle(s): Curved and fitted with 4” - 6” offset; 20” crawl hole and 6” flow holes on top, sides and bottom.Mounting Skids: Heavy duty U-shaped skids with full continuous weld to tank.Manway: Hinged non-sealing 25” lid with 10” anti-slosh ring.Ladder: 3⁄4” pipe construction.Sight Gauges: Clear flexible tubing mounted on front and rear of tank.Light Brackets: Standard DOT: LED marker, stop and clearance; sealed LED beam lights.Fenders: Welded to tank, constructed from 12 gauge steel.



WARRANTY & COATINGS


FIVE YEAR LIMITED TANK WARRANTYCustomer satisfaction and quality products are our main focus at United Truck & Equipment. We build our tanks with longevity in mind using only the best materials, such as ASTM A36 steel,100% full welds inside and out (no skip welding), and belly plates on all 3000+ gallon tanks.

We take great pride manufacturing superior water tanks and proudly backing that up with our standard five year tank warranty. From the date of your purchase, we cover against defective workmanship or defective materials for a full five years.

We want your tank to outlive your truck!

BELLY PLATEAs part of our superior craftsmanship, all of our 3000+ gallon tanks come standard with full belly plate. These plates increase the longevity of the tank by reinforcing the area most affected by stress and vibration. This additional detail is critical for preventing premature cracking and deterioration.

Standard belly plates are constructed with 3/16” ASTM A36 steel, running the entire length of the tank and measure 60” across. The belly plates, like all elements of our tanks, are 100% full welds, no skip welding.

EXTERIOR POWDER COATINGIn our continuing pursuit to offer the highest quality product and achieve the longest lasting and best looking finish we have installed a state of the art powder coating facility.

Powder coating is an eco-friendly method of painting that requires no solvents and generates little or no hazardous material waste. The coating is applied as a dry powder, and then cured to a solid, durable coating using heat.

The end result is an attractive finish that is harder and more durable than conventional paint. Powder Coating can be used to create a wide range of finishes and colors.

INTERIOR EPOXY COATINGOur tank interior liner is a solid, corrosion resistant epoxy lining. It is designed for use in both new construction and maintenance as a potable water lining for tanks, pipes, pumps and valves. Tanks are sandblasted to a white metal and cleaned prior to the epoxy application.

***NSF/ANSI Standard 61 approved for potable water.******Dramatically increases the life of the tank.***



FACTORY INSTALLED 5 VALVE TANK SYSTEM


STANDARD SIZES: 1800-2450 gallons (single axle) 3000-6000 gallons (tandem axle) UnitedBuilt® tank. 5 year limited tank warranty 5 VALVE SPRAY SYSTEM: Five independently air operated UTE AV1100 valves (see pages 29-31 for optional valves): Two valves at rear of tank. Two valves at front of truck. One mid-ship valve on driver’s side.

Each valve is independently air operated from cab control console. All plumbing is schedule 40 steel pipe with groove style flexible fittings throughout (no threaded fittings or hose plumbing). JET VALVE: Standard 1-1⁄2” ball valve on tank ladder side off the manifold. SIGHT GAUGE: 5⁄8” clear all season, flexible rubber tubing at front and rear of tank with brass hardware connections. WATER PUMP: Berkeley or Franklin 4X3 centrifugal cast iron pump 750GPM@75PSI, with ceramic mechanical seal (1000GPM@125 PSI available). PTO: Chelsea heavy duty two gear air shift PTO with 1310 series balanced tube drive line (HOT shift PTO available for automatic transmission). LIGHTS: LED sealed beam lights with wiring encased in rubber harness. POWDER COAT: Exterior sand blasted and powder coated. (See page 6) MOUNTING: Schedule 80 solid angle tie down mounts, spring loaded at front of tank. Vulcanized rubber wear pad for tanks 3000 gallons and larger. REAR BUMPER: Frame is tailed out; push block constructed of 1⁄2” steel, reinforced with 1⁄2” steel gussets, storage box with hinged lid. DRIVE-UNDER PROTECTION: 3X3 square tubing lowered from bumper. FRONT SPRAY GUARD: 3/16” steel plate welded to front spray bar to provide protection. CAPACITY OPTIONS: 1500– 8000 gallons. 1 year limited plumbing warranty

1800-2450 Gallon Single AxleShown with Conventional Tank and optional hose reel.

3000-6000 Gallon Tandem AxleShown wih Vision Tank and optional hose reel.

FACTORY INSTALLED 5 VALVE SYSTEMON YOUR TRUCK OR OURS. CALL FOR MODELS & AVAILABILITY.


See page 14-15 for system options.


DROP ON R-KIT


STANDARD SIZES: 2000-2450 gallons (single axle) 3000-6000 gallons (tandem axle). UnitedBuilt® tank. 5 year limited tank warranty 4 VALVE SPRAY SYSTEM: Four independently air operated UTE AV1100 valves: two valves mounted opposite sides at the front, two valves mounted opposite sides at the rear. Valves are independently air operated from the cab control console. All plumbing is schedule 40 steel pipe with groove style flexible fittings (no threaded fittings or hose plumbing). WATER PUMP: Berkeley or Franklin 4X3 centrifugal cast iron pump 750GPM@75PSI, with ceramic

mechanical seal. OPTIONAL WATER PUMP: Franklin FMIH-40 or Berkeley B4ZRKS 4X4 self-prime centrifugal cast iron pump 650GPM@50PSI, required with self loading option (pictured below). DRIVE: Hydraulic drive with bi-directional hydraulic pump and motor. Motor pre-plumbed to water pump with filter, pressure relief valve, and oil reservoir. Hydraulic lines (pressure and suction) pre-plumbed through water tank for fluid cooling. MOUNTING KIT: Schedule 80 solid, (6) heavy duty angle tie down mounts, with springs (4) and tank guides. Vulcanized rubber wear pad for tanks 2400 gallons and larger. LIGHTS: LED sealed beam lights with wiring encased in rubber harness. PAINT: Exterior sandblasted and primed (shown with optional powder coated exterior). See page 6 for powder coat and epoxy coating options. 1 year limited plumbing warranty

R-KIT OPTIONSVision Tank • Hose Reel - Manual or Electric Rewind • Front Spray with Plumbing and Hardware Suction Fill Plumbing with Hose and Strainer • Gravity Drop • Water Cannon - Manual or Electric Quick Dump • Exterior Protection - Powder Coat Application • Interior Protection - Epoxy Lining

CAPACITY OPTIONS: 1500 - 8000 gallons. VALVE OPTIONS: (see page 29-31)

AV1100 Air Valves (standard): Air to Close, Interchangeable Nozzle Options BC2410 Spray Head Valve (SHV): Air to Open, Built-in Adjustable NozzleElectric Valves: 12V or 24V Spray Head Valve, Built-in Adjustable NozzleInline Air Valves: AV323G, AV5293, Netafim-Dorot, Cla-Val, Bermad

NOZZLE OPTIONS: (see page 28)

BC2178 Street Flusher Nozzle BC2179 Side Spray NozzleBC2399 Adjustable Spray NozzleBC2384 Fan Spray Nozzle

OTHER SET UP OPTIONSAir Articulated Spray NozzleRaised/Centered Spray HeadLowered Flusher Spray Nozzle Manually Controlled Spray Heads

DROP ON R-KIT FULLY PLUMBED & READY TO GO.



5 AIR VALVE U-KIT


5 AIR VALVE U-KITSTANDARD SIZES: 2000-2450 gallons (single axle) 3000-6200 gallons (tandem axle) UnitedBuilt® tank. 5 year limited tank warranty

5 VALVE SPRAY SYSTEM: Five independently air operated UTE AV1100 valves. Two valves for rear spray, two valves for front spray, one valve for side spray. All plumbing provided is schedule 40 steel pipe with groove style flexible fittings. The kit comes standard with a UTE cab control console to independently air operate each valve from inside. WATER PUMP: Berkeley or Franklin 4X3 centrifugal cast iron pump 750GPM@75PSI with ceramic mechanical seal. MOUNTING KIT: Schedule 80 solid, (6) heavy duty angle tie down mounts with tank guides and hardware, vulcanized rubber wear pad for tanks 3000 gallons and larger. CUT OUTS: Pre-measured steel arches for manifold pipe clearance under tank, packed loose for custom installation. LIGHTS: LED sealed beam lights with wiring encased in rubber harness. PAINT: Exterior sandblasted and primed. (Shown with optional powder coated exterior). See page 6 for powder coat and epoxy coating options.

U-KIT OPTIONSVision Tank • Hose Reel - Manual or Electric Rewind • Curb Side Spray with Plumbing and Hardware

Suction Fill Plumbing with Hose and Strainer • Gravity Drop • Water Cannon - Manual or Electric Quick Dump • Exterior Protection - Custom Powder Coat Application • Interior Protection - Epoxy Lined

CAPACITY OPTIONS: 1500-8000 gallons.

VALVE OPTIONS: (see page 29-31)

AV1100 Air Valves (standard): Air to Close, Interchangeable Nozzle Options BC2410 Spray Head Valve (SHV): Air to Open, Built-in Adjustable NozzleElectric Valves: 12V or 24V Spray Head Valve, Built-in Adjustable NozzleInline Air Valves: AV323G, AV5293, Netafim-Dorot, Cla-Val, Bermad

NOZZLE OPTIONS: (see page 28)

BC2178 Street Flusher Nozzle BC2179 Side Spray NozzleBC2399 Adjustable Spray NozzleBC2384 Fan Spray Nozzle

OTHER SET UP OPTIONSAir Articulated Spray NozzleRaised/Centered Spray HeadLowered Flusher Spray Nozzle Manually Controlled Spray Heads



HOOK/ROLL OFF TANKSTANDARD SIZES: 2000-4000 gallon UnitedBuilt® tank. 5 year limited tank warranty.

HOOK/ROLL RECEIVER: Receiver A-frame for hook arm/Rollers for roll off bed and skids built to the specifications of the hook/roller manufacturer. SKIDS: Heavy duty 3”x6” tubing with 3⁄8” wall full length skids extending out the back of the tank for the water pump platform and rollers. BELLY PLATE: Full belly plate along bottom of tank. WATER PUMP: Berkeley

or Franklin 4X3 centrifugal cast iron pump 750GPM@75PSI, with ceramic mechanical seal. OPTIONAL WATER PUMP: FMIH-40 or Berkeley B4ZRKS 4X4 self-prime centrifugal cast iron pump 650GPM@50PSI, required with self loading option. HYDRAULICS: Bi-directional motor and quick disconnect fittings. OPTIONAL: Hydraulic lines routed through tank depending on the location of chassis’ quick couplers. PAINT: Exterior sandblasted and primed (Shown with optional powder coat application. NOTE: Customer truck must have an extra hydraulic circuit to drive the water pump. 1 year limited plumbing warranty

HOOK/ROLL OFF TANK & FLUSHER SYSTEM


FACTORY INSTALLED FLUSHER SYSTEMSTANDARD SIZES: 2000-2400 gallon (single axle) 3000-5200 gallon (tandem axle) UnitedBuilt® tank. 5 year limited tank warranty

6 VALVE SPRAY SYSTEM: Six independently air operated UTE AV1100 valves with flusher nozzles: Two valves with lowered flusher nozzles at front of truck. Two valves with lowered flusher nozzles on opposite sides of system. Two valves at back of the tank with standard adjustable

fan sprays. (Truck pictured with optional front center flushing nozzle and remote control cannon.) All plumbing in schedule 40 steel pipe with groove style flexible fittings throughout (no thread fittings or hose plumbing). WATER PUMP: Berkeley B4ERBMS 5X4 centrifugal cast iron pump 900GPM @ 150PSI with ceramic mechanical seal. DRIVE: Chelsea heavy duty two gear air shift PTO with 1310 series balanced tube drive line. MOUNTING: Schedule 80 solid, angle tie down mounts, spring loaded at front of tank. Vulcanized rubber wear pad for tanks 3000 gallons and larger. LIGHTS: LED sealed beam lights with wire looms encased in rubber harness. POWDER COAT: Exterior sandblasted, powder coat exterior. REAR BUMPER: Frame is tailed out: Push block constructed of 1⁄2” steel with storage and hinged lid. 1 year limited plumbing warranty



SLIDE IN TANK & TANKER TRAILER


SLIDE IN TANKSTANDARD SIZES: 2000-4000 gallonUnitedBuilt® tank. 5 year limited tank warranty

TANK: Rectangular shape constructed of 3/16” ASTM-A-36 steel. Ends recessed in shell, welded 100% on both sides. BAFFLES: Two lateral. SKIDS: Six inch channel skids running full length of tank and extending out the rear for the pump mounting platform. MOUNTING: Schedule 80 solid, tie down eyes at each corner of the tank. WATER PUMP: Franklin 3” pump with Honda 9HP engine or Berkeley 3” pump with Robin 13.5HP engine (tank pictured with quick disconnect hydraulic drive). SPRAY SYSTEM: Two independently air operated UTE AV1100 valves with BC2384 fan spray nozzles. Tank pictured with optional Berkeley B4ZRKS hydraulic drive water pump and suction fill plumbing. 1 year limited plumbing warranty

TANKER TRAILER

STANDARD SIZES: 6500 gallon (tank pictured in optional stainless steel) UnitedBuilt® tanker.5 year limited tank warranty

SPRAY SYSTEM: Two to six independently air operated UTE AV1100 valves. 5th wheel plate. Landing gear, heavy duty tandem axle. Hydraulic drive or auxiliary drive spray system. 1 year limited plumbing warranty



OFF & ON HIGHWAY TANK SYSTEMS


OFF HIGHWAY TANK SYSTEMSSTANDARD SIZES:5500 - 15000 gallon UnitedBuilt® tank. 5 year limited tank warranty

SEVERE SERVICE TANK: 1⁄4” ASTM-A-36 top, 5/16” ASTM-A-36 bottom construction. Full lateral and longitudinal baffles. SAFETY RAILINS: Run the length of the tank on both sides. 30” screened manway. Drive tire fenders cut and welded into tank. MOUNTING: Flexing tank mount system with pin box built into bottom of tank. LIGHTS: LED lights and reflectors with wiring encased in

conduit, hydraulic motor close coupled to water pump. WATER PUMP: Berkeley or Franklin 4X3 centrifugal cast iron pump 750GPM@75PSI, with ceramic mechanical seal. Water pump performance 750GPM@75PSI. (Optional B4 high volume and pressure water pump rated at 1500GPM@100PSI) SPRAY SYSTEM: UTE heavy duty BC2403 air operated spray head valves (SHV) with adjustable pattern and volume spray band. 1 year limited plumbing warranty

WEIGHT FORWARD SYSTEMSSTANDARD SIZES: 3600-4200 gallon (3600 pictured) legal load UnitedBuilt® tank. 5 year limited tank warranty 5 VALVE SPRAY SYSTEM: Five independently air operated UTE AV1100 valves; two valves at rear of tank, two valves at front of truck, and one valve on driver’s side. (Truck pictured with optional 3” inline air operated valves.) Each valve is independently air operated from cab control console. All plumbing is schedule 40 steel pipe with groove style flexible fittings throughout. WATER PUMP: Berkeley 4X3 centrifugal cast iron pump 750GPM@75PSI, with ceramic mechanical seal. PTO: Chelsea heavy duty two gear air shift PTO with 1310 series balanced tube drive line (system pictured with optional diesel drive pony motor for water pump). LIGHTS: LED sealed beam lights with wiring encased in rubber harness. POWDER COAT: Exterior sand blasted and primed, powder coat applied. MOUNTING: Schedule 80 solid, angle tie down mounts, spring loaded at front of tank. Vulcanized rubber wear pad for tanks 3000 gallons and larger. REAR BUMPER: Frame is tailed out; push block constructed of 1⁄2” steel with storage and hinged lid. 1 year limited plumbing warranty



FIRE TENDER SYSTEM


FIRE TENDER

STANDARD SIZES: 2000-4000 gallons UnitedBuilt® tank. WATER PUMP: Berkeley or Hale cast iron centrifugalpump, 750GPM@75PSI or 900GPM@150PSI with a ceramic mechanical seal. DISCHARGE: 2-1⁄2” discharge valves with male NST threads plumbed to any location of the truck. SIDE SPRAYS: Air operated side spray valves (pictured). QUICK DUMP: 10” manual or electric quick dump with 90 degree chute for rear dump or side dump. MONITORS: Manual (pictured), air-operated or 12V remote control monitor. STORAGE: Portable tank storage and ladder holders built onto main tank. Tool boxes around frame of truck. 1 year limited plumbing warranty CALL WITH YOUR CUSTOM SPECIFICATIONS



UNITEDBUILT SYSTEM OPTIONS


TOOL BOX - REARTANK BASKET TOOL BOX - FRAME

Self-load plumbing with internal priming tank. Suction hose with foot valve or strainer. See page 48 for UTE suction fill assembly.

Air articulated side spray independently controlled from UTE cab control console.See page 47 for UTE air articulated spray assembly.

Safely fill your water tank via remote controlled suction fill arm.

SUCTION FILL

GRAVITY DROP

HOSE TUBES HOSE SKID STORAGE HOSE TRAY

TOOL HOLSTERSGRAVITY OR REAR PRESSURE BAR

ARTICULATED SIDE SPRAY

SUCTION FILL ARM CENTER SPRAY

Front or rear center spray.

Tool holsters provide quick & secure storage mounted at front or rear head of tank.

Air actuated 6” gravity drop.

Hose tubes built into fender with closing doors.

Hose tray fenders for easy access storage of mill hoses.

Lockable rear tail mounted toolbox.Storage basket conveniently mounted on rear or top of tank.

Hose storage in tank runners with hose stops mounted on rear spray bar.

Lockable frame mounted toolbox.

Air activated 4” x 96” with 1⁄2” jets on 6” centers. Available with air operated 2’ extensions on each side of spray bar for total spread of 12’ when lowered from UTE cab control console. See page 16 for UTE gravity drop & pressure bar options.



UNITEDBUILT SYSTEM OPTIONS


Heavy Duty 2 Gear Chelsea PTO See page 50 for Hot Shift PTO options.

Standard 12V Rear Mounted Manual Rear MountedStandard 12V Side Mounted

American Reel Crank Style

Rear Head Mounted

Frame Mounted

Deck Mounted

American Reel 12V Motor Rewind

Berkeley Centrifugal 900GPM@150PSISee page 23 for high pressure options.

Eco-friendly little method of painting that requires no solvents. Generates harder & more durable finish to further pursue highest product quality.See page 6 for powder coating options.

NSF/ANSI Standard 61 approved for potable water. Dramatically increasing the life of the tank.See page 6 for epoxy coating options.

Bi-Directional Series HydraulicsSee page 49 for hydraulic options.

John Deere/Perkins 100+ HP Liquid Cooled EngineSee page 26 for auxilary engine options.

HIGH PRESSURE PUMP

HYDRAULIC DRIVE

POWDER COATING

HOSE REELS: MANUAL & ELECTRIC

MONITORS: MANUAL & ELECTRIC

EPOXY INTERIOR

HOT SHIFT PTO

AUXILIARY ENGINE

*Call with yourtransmission model.

MOTOR: 11⁄2” Gear PUMP: 2” Gear 13⁄4” Gear

SIZES:50’x1” hose & nozzle50’x11⁄2” hose & nozzle100’x1” hose & nozzle100’x11⁄2” hose & nozzle

See pages 39-40 for reel options.See page 42 for hoses & nozzles.See page 48 for UTE hose reel assemblies.

Electric Elkhart MonitorSee page 37 for electric monitors.

Manual Elkhart MonitorSee page 38 for manual monitors.

Nozzles & Repair PartsSee pages 37-38.



UTE GRAVITY DROPAIR ACTUATED

UTE GRAVITY DROP, GRAVITY BAR & PRESSURE BAR


REAR PRESSURE BAR: 3” x 96” rear mounted with 1⁄2” brass jet nozzles on 6” centers. Shown with air operated 2’ extensions (see below) on each side of spray bar for a total spread of 12’ when lowered.

REAR GRAVITY BAR: 4” x 96” rear mounted with 1⁄2” jets on 6” centers. Air operated and controlled from cab control console.

REAR PRESSURE & GRAVITY BAR

BRASS JET NOZZLEDESCRIPTION WT/LB PART#Brass Jet Nozzle 0.20 3909

GRAVITY DROP 6”Air Actuated DESCRIPTION WT/LB PART# 6” Air Actuated Gravity Drop Assembly 110 9455A. 6” 2-Way Air Actuated Butterfly Valve 26 9159

OPTIONAL MOUNTING PARTS DESCRIPTION WT/LB PART#B. 6” Rigid Mount Coupling 8.25 4248C. 6” Weld x Groove 8.50 4495See page 32 for air control valves and console.

Air operated splash plate style gravity drop, weld into bottom of tank with groove nipple and riigid coupling or flange mount (see flanges on page 45). (Single in-cab control valve)

Front ViewSide View

Return Springs

Air Actuated Butterfly Valve

91⁄4”

91⁄4”

6”

Air Pot

28”28”

DESCRIPTION DIMENSIONS WT/LB PART#Air Pot 4.95 1035Eye Bolt 3⁄8 x 5 0.2 2344Coupling Nut 1⁄2 - 20 1.75 0.11 5742Air Pot Spring 1.11 1036Gum Rubber 3⁄8” - cut to fit 1.36 0100Clevis ½” x ½ “ 0.34 1726

DISCONTINUED GRAVITY DROP REPLACEMENT PARTS

DISCONTINUED

Replacement parts still available.

A

B

C



HYDRANT FILLS, QUICK DUMP VALVES & MANWAYS


DESCRIPTION WT/LB PART#10” Manual Quick Valve 65 226310” Air Articulated Quick Valve SPECIAL ORDER 80 482110” Electric Quick Valve SPECIAL ORDER 315610” Electric Quick Valve Stainless, 12V SPECIAL ORDER 6878Flange (shown) 4 6068Flange Stainless 4 37344 Bolt Strip 0.40 5518

10” Elbow for Quick DumpDESCRIPTION WT/LB PART#10” Elbow 34 4307

HYDRANT FILLS 21/2”Quick Swivel & Lock Spout

QUICK DUMP VALVES

MANWAY & ACCESSORIESStandard Manway is 25”

DESCRIPTION DIMENSIONS WT/LB PART# 21⁄2” PipeA. Hydrant Fill 10’ Tank 37” x 51” (inside) 45 4018A. Hydrant Fill 15’ Tank 37” x 81” (inside) 60 3475B. Hydrant Fill T-nut 0.3 4815C. Hydrant Fill Swing Spout 10” x 251⁄2” (outside) 9 3476

HYDRANT FILL KIT WT/LB PART#10’ Kit - 10’ Hydrant Fill, T-nut, Spout, 2 Rigid Grooved Couplings 64 591015’ Kit - 15’ Hydrant Fill, T-nut, Spout, 2 Rigid Grooved Couplings 79 5909

10” Quick Dump and Mounting Flange

DESCRIPTION DIMENSIONS WT/LB PART#Manway Ring 25” Diameter - 12 Gauge 30 3565Manway Ring 20” Diameter Mild Steel 9 5012Manway Ring Stainless 20” Diameter Stainless 9 4830Inspection Cover 20” Cad Plated 17.43 4831

DESCRIPTION WT/LB PART#Hydrant Wrench 3 2999

DESCRIPTION WT/LB PART#21⁄2” Tempe/Phoenix 2.2 300021⁄2” MNSTXFNPT 2.5 426821⁄2” MPXFNST 1.7 300221⁄2” MPXMNST 1.5 3802

Adjustable Hydrant Wrench

Fire Hydrant Adapter

Note: Other adapters in stock. Call with your specifications.

Hydrant Fill Strainer Stainless BasketSIZE WT/LB PART#2 1⁄2” 24 4293

Bronze Check ValveDMIMESIONS WT/LB PART#21⁄2” Thread 4.4 75703” Thread 6.7 7624

C

A

B

DESCRIPTION DIMENSIONS WT/LB PART#Lockable Hasp for Manway 4.5” 1 7016Manway Screen 25” 25 7481Vented Sealing Manway 20” diameter 33 1179

25”

20”

SEALING MANWAY& OTHER ACCESSORIES


9”


TANK MOUNTING, MUD FLAPS & SIGHT GAUGE


1”

SKIRTBOARDRubber pad vulcanized to steel strap to be mounted between tank skid and truck frame.

MOUNTING KIT

MUD FLAPS TANK SIGHT GAUGE

DESCRIPTION WT/LB PART#Vulcanized Rubber Pad 2.36 per foot 2626

24”

DESCRIPTION CONTENTS WT/LB PART#Mounting Kit 6 Tank Mnts, 6 Frame Mnts, 4 Springs & Bolts 52 3342Mount Kit Fasteners 12 Bolts, 12 Locknuts, 4 Washers 5.04 2585Tank Bolt Kit 1- Bolt, 1 Locknut, 1 Washer 0.70 6263

Tank mounting instructions on page 53.

DESCRIPTION DIMENSIONS WT/LB PART#UTE Mud Flap 24” W x 36” L 18 (pair) 0821Mud Flap Extensions 6” W x 24” L 12G steel 4.29 2995Anti Sail Mud Flap 24” W x 36” L 26 (pair) 3215Bracket for Anti Sail 22” W x 21” H 2.13 4360Hooks for Mud Flaps 31⁄2” size 0.12 5925

DESCRIPTION DIMENSION WT/LB PART#Flexible PVC Clear Tubing 5⁄8” Cut by the Foot .069 1201Acrylic Clear Tubing 5⁄8” OD ½” ID .06 5939A. Sight Gauge Fitting 5⁄8” x1⁄2” Includes Insert .023 1194B. Ferrule .0006 7631C. Insert .0006 7632

Hooks for Mud Flaps

A

B

C

21⁄2”

REEL BRACKETS

DESCRIPTION WT/LB PART#1⁄4” Brackets for American Reels 82891⁄4” Brackets for COX Reels 3609

REAR HOSE RACK

Hose rack mounted on rear tank head for simple hose storage. Call for information.



LIGHTS, BRACKETS & HARNESSES


DESCRIPTION WT/LB PART#Tail Lamp Red LED 0.22 9311 A. Adapter for Part #9311 9330Back Up Lamp LED 0.22 9310*Call for incandescent 24V

DESCRIPTION WT/LB PART#Marker Red LED 0.09 9309Marker Amber LED 0.09 9308*Call for incandescent 24V

DESCRIPTION WT/LB PART#A. Rear Bracket 4.50 7127B. Marker Bracket 0.50 2085C. Clearance Bracket 1.00 2101

DESCRIPTION WT/LB PART#A. For Tail Lights 0.17 3354 B. For Marker Lights 0.12 2928

6-Lamp HarnessDESCRIPTION WT/LB PART#6 Lamp Pig Tails, 2.75 73733 Marker Pig Tails

Truck Adapter DESCRIPTION WT/LB PART#Universal 0.20 7376Peterbilt 0.40 7374Ford 0.40 7375

ID Light HarnessDESCRIPTION WT/LB PART#Triple Marker 1.25 7392Pig Tail 138” Long

Pig Tail MarkerDESCRIPTION WT/LB PART#Single Marker 0.65 7391 - 36” LongSingle Marker 0.95 7390 - 90” Long

2 Beam Revolving BeaconDESCRIPTION WT/LB PART#12V, 81⁄4” x 87⁄16” 6.55 0795

BACK UP STOP/TURN TAIL LIGHTS

WORK & STROBE LIGHTS

BEACON &LICENSE LIGHTS

LIGHT HARNESS AND ADAPTERS

MARKER LIGHTS LIGHT GROMMETS LIGHT BRACKETS

LED

LED

Weather Proof Rubber Work LightDESCRIPTION WT/LB PART#43⁄4” Diam. x 3” Depth 1.30 6934

Quad Flash StrobeDESCRIPTION WT/LB PART#12-24V, 8” x 8” 3.56 3890

License Plate LightDESCRIPTION WT/LB PART#Mounts on 2” Centers 0.20 3518

A

AB

A

C

B



PUMP ROTATION GUIDE


FIRST TIME USEPACKING: Starting a new pump.Before starting the pump for the first time, loosen gland nuts and retighten, finger tight. Once running, allow packing to leak liberally for a few moments. Then tighten gland nuts one complete turn each until leakage is reduced to 40 to 60 drops per minute.

PUMPS WITH MECHANICAL SEAL:Adjustment or maintenance is normally not required. The seal is enclosed within the pump and is self adjusting.

PRIMING:Pump MUST BE completely filled with water when operating.

A self-priming pump only needs to be manually primed at the first start-up. Once primed, under normal conditions pump will re-prime automatically at each subsequent start-up.

To prime, remove plug from top of pump case and fill case with water. Replace plug and start pump. Unit is equipped with a flapper type check valve which will open at start-up and allow pump to evacuate air from the suction line. After several minutes of operation, pump will be fully primed and pumping water. Priming time will vary.



UTE M3ZRM WATER PUMP & REPAIR PARTS


Model #M3ZRM

UTE 4X3 CENTRIFUGAL WATER PUMPSMade with the finest raw materials improving the overall longevity and service time of the water pump.

DESCRIPTION MODEL# WT/LB PART#Domestic Groove (CCW), Rope Packing B66895MS 100 9335

DESCRIPTION MODEL # WT/LB PART#*Volute Groove (CCW) BH04041MS 42 9331Import Volute Groove (CCW) BH04041IMP 46.5 7467

*Four drain plugs, easily drain water in any position.DESCRIPTION MODEL # WT/LB PART#Powerhead (CCW), Rope Packing B85551MS 60 9322Powerhead (CW), Rope Packing B85552MS 60 CallImport Powerhead (CCW), Mech Seal B85549IMP 60 8184

• Economical• Reduce Down Time

DESCRIPTION MODEL # WT/LB PART#*Shaft Kit (CW), Rope Packing B80698MS 8 8111*Shaft Kit (CCW), Rope Packing B80696MS 8 8110*Shaft Kit (CW), Mechanical Seal B80699MS 8 8115*Shaft Kit (CCW), Mechanical Seal B80697MS 8 8113Import Shaft Kit (CW), Rope Pack B80698IMP 8 6943Import Shaft Kit (CCW), Rope Pack B80696IMP 8 6942Import Shaft Kit (CW), Mech Seal B80699IMP 8 8114Import Shaft Kit (CCW), Mech Seal B80697IMP 8 8112

*Made with StressProof® to reduce fatigue and stress effects.

DESCRIPTION MODEL # WT/LB PART#*Impeller (CW) BM02153MS 10 8517*Impeller (CCW) BM02181MS 10 8516Import Impeller (CW) BM02153IMP 10 6968Import Impeller (CCW) BM02181IMP 10 6736

SHAFT KITS IMPELLERS

VOLUTES POWERHEAD “PUMPKIN”Powerheads are a great way to get pumps operational in a time crunch, offering minimal repair time.

DOMESTIC & IMPORTED REPAIR PARTSCompatible with B3ZRM repair parts. See page 22 for a full list of B3ZRM(S) repair parts.

• All cast components made from SAE grade 30,000 PSIGray Iron.

• Only alloys of known quality are used, no scrap iron.• Volutes have four drain plugs to permit draining water in

any position and preventing damage due to freezing.• Shaft is resistant to fatigue and stress, due to the type of

specialty steel used.• Shaft threads are consistent and reliable, machined to

aircraft thread tolerances.• Impellers balanced to reduce vibration, a known cause of

shaft failure.

*Machined with an extra operation to have the best control of the concentric axis.*Balanced with dynamic process that reduces vibration.

DESCRIPTION MODEL# WT/LB PART#Import Groove (CCW), Rope Packing B66895IMP 100 6816Import Groove (CW), Rope Packing B66899IMP 100 7824Import Groove (CCW), Mech Seal B68416IMP 100 8176Import Groove (CW), Mech Seal B68414IMP 100 8401

IMPORT WATER PUMP 4X3

Alternative 4X3 CCW water pump. Similar to the B3ZRM with grooved ends and rope packing.



BERKELEY WATER PUMPS


DESCRIPTION MODEL# PART#1 Case, Volute (CW) H00689 09411 Case, Volute (CCW)* H00698 09422 Impeller (CW)* M02153 09482 Impeller (CCW)* M02181 09496A Shaft Kit (CW)* B80698 09316A Shaft Kit (CCW)* B80696 093013 Ring, Packing (Set of 6) S14022 392414 Sleeve, Shaft S05127 291616 Bearing, Ball S13270 314917 Gland, Packing Split B82468 095818 Bearing, Ball S13271 315819 Frame H00553 3025N/A Locknut M10221 381924 Locknut, Impeller (CW) M10220 314624 Locknut, Impeller (CCW) U36-189SS 437932 Key, 1⁄4x21⁄8” S24255 626040 Slinger, Water S12260 217435 Inner Bearing Cap S19033 096737 Outer Bearing Cap, Assembly S19914 096873 Gasket, Volute S05126 0954Not Shown Spacer, Sleeve S08980 0957800A Capscrew, Hex 3⁄8-16x1” (8 Req.) S26826 4543800B Bolt, Sq. Head 3⁄8-16x21⁄2” (2 Req.) S23762 0970802 Nut, Hex 3⁄8-16 (2 req.) S23343 0969Not Shown Washer, Bearing Lock S16181 3818810A Plug, Pipe 1⁄4 NPT (4 Req.) S23715 4542810B Plug, Pipe 1⁄2 NPT S23717 4541811 Fitting, Grease S23670 7855

*Domestic & Import available, see page 21.

DESCRIPTION MODEL# PART#1 Case, Volute (CW) H04040 09441 Case, Volute (CCW)* H04041 09452 Impeller (CW)* M02153 09482 Impeller (CCW)* M02181 09496A Shaft Kit (CW)* B80699 33006A Shaft Kit (CCW)* B80697 329914 Sleeve, Shaft S39242 100416 Bearing, Ball S13270 314918 Bearing, Ball S13271 315819 Frame H04007 2249Not Shown Locknut M10221 381924 Locknut, Impeller (CW) M10220 314624 Locknut, Impeller (CCW) U36-189SS 437932 Key, 1⁄4x21⁄8” S24255 626035 Inner Bearing Cap S19033 096737 Outer Bearing Cap, Assembly S19914 096840 Slinger, Water S12260 217472 Ring, Thrust S29218 5319Not Shown Gasket, Volute S05126 095478 Spacer, Sleeve S08980 095789 Seal, Mechanical Shaft S32690 0972800 Capscrew, Hex 3⁄8-16x7⁄8” (8 Req.) S26825 4819Not Shown Washer, Bearing Lock S16181 3818810 Plug, Pipe 1⁄4 NPT (3 Req.) S23715 4542811 Fitting, Grease S23670 7855816A Ring, Retaining S23009 2173816B Ring, Retaining S23010 3150*Domestic & Import available, see page 21.

Model #B3ZRMS

Model #B3ZRM

Model #B4ZRKS

DESCRIPTION MODEL# PART#1 Case, Volute H02505 Call2 Impeller M08095 21766A Shaft Kit w/Washer & Bolt B80703 46219 Cover, Suction L04108 246114 Sleeve, Shaft S39242 100416 Bearing, Ball S13270 314918 Bearing, Ball S13271 315819 Frame H04007 2249Not Shown Nut, Bearing Lock M10221 381924 Nut, Hex Jam M10220 314632 Key, 1⁄4x1” S24168 35 Inner Bearing Cap M10213 300440 Slinger, Water S12260 217451 Seal, Oil M10216 300370 Coupling, Shaft S30636 094671 Bracket, Coupling Kit B07779 091673A Gasket, Case S05126 095473B Gasket, Blind Flange S10364 3010Not Shown Sleeve, Spacer S08980 095789 Seal, Mechanical Shaft S32690 0972800A Capscrew, Hex 3⁄8-16x1” (8 Req.) S26826 4543800B Capscrew, Hex 3⁄8-16x11⁄4” (8 Req.) S26828 4826800C Capscrew, Hex 3⁄8-16x3⁄4” (8 Req.) S26824 3005800D Set Screw, Hex 1⁄2” S23964 800E Set Screw, Hex 5⁄8” (2 Req.) S23965 5122800F Capscrew, Hex 5⁄8-11x13⁄4” (4 Req.) S27001 3011802 Nut, Hex 3⁄8-16 S23103 3008804A Weight, Clack S14842 3007804B Weight, Clack S15325 3006Not Shown Washer, Bearing Lock S16181 3818810A Plug, Pipe 1⁄2” NPT S23717 4541810B Plug, Pipe 11⁄2” NPT (2 Req.) S23695 6794811 Fitting, Grease (3 Req.) S23670 7855816A Ring, Retaining External S23009 2173816B Ring, Retaining S23010 3550835 Clack, Rubber L04119 2210850 Flange, Companion S15933 3009

Thread (CW) ...................B66161Thread (CCW) .................B66168Groove (CW) ...................B66899 Groove (CCW) .............. B66895*

Thread (CW) ...................B68414Thread (CCW) .................B68415Groove (CW) ...................B68417 Groove (CCW) ................B68416

CW (ONLY) .....................B69876W/O Hyd Adapter ...........B69880

6A

6A

6A



BERKELEY WATER PUMPS


Model #B4ERBMS

Model #B6ZRH(S)

Model #B3JRMBMS

DESCRIPTION MODEL# PART#

1 Case, Volute H05065 38112 Impeller M04186 09506A Shaft Kit B82184 340313 Ring, Packing (Set of 6) S14022 392414 Sleeve, Shaft S05127 291616 Bearing, Ball S13270 314917 Gland, Packing Split B82468 095819 Frame H00553 302522 Locknut M10221 381926 Screw, Impeller 3⁄8-16x13⁄4” S23572 32 Key, 1⁄4x21⁄8” S24255 626035 Inner Bearing Cap S19033 096737 Outer Bearing Cap, Assembly* S19914 096840 Slinger, Water S12260 217469 Washer, Impeller S06314 264773 Gasket, Volute S05126 095478 Sleeve, Spacer S08980 0957800 Bolt, Sq. Head 3⁄8-16x21⁄2” (2 Req.) S23762 0970801 Stud, 3⁄8-16x11⁄4” (8 Req.) S23994 4227802A Nut, Hex 3⁄8-16 (8 Req.) S23103 3008802B Nut, Hex 3⁄8-16 (2 Req.) S23343 0969805A Washer, Lock S23036 2694805B Washer, Bearing Lock S16181 3818810 Plug, Pipe 1⁄2 NPT (3 Req.) S23717 4541811 Fitting, Grease S23670 7855

*Includes grease fitting and set screw**Mechanical seal S32690 0972


1 Case, Volute (CW) H01939 41111 Case, Volute (CCW) H01940 48602 Impeller (CW) L06015 44352 Impeller (CCW) L06020 52396A Shaft Kit (CW) B60659 52386A Shaft Kit (CCW) B60660 7 Ring, Wearing S32745 441511 Retainer, Mechanical Shaft Seal S11452 453114 Sleeve, Shaft S05974 420016 Bearing, Ball S13395 426518 Bearing, Ball S13754 441019 Frame H05508 26 Screw, Impeller 1⁄2-13x11⁄2” S23623 453332A Key, 1⁄2x4” S24214 668832B Key, 1⁄4x11⁄2” S24170 684935 Inner Bearing Cap S13213 586037 Outer Bearing Cap S35277 40 Slinger, Water S10964 363651 Seal, Oil S14764 441369 Washer, Impeller S18117 486372 Ring, Thrust S19221 441173 Gasket, Balance Ring S09943 402989 Seal, Mechanical Shaft S32693 3917115 Balance Ring L13649 5859119A O-Ring S13760 1936119B O-Ring S24599 4414800A Capscrew, Hex 1⁄2-13x11⁄4” (8 Req.) S26914 800B Bolt, SQ. Head 1⁄2-13x21⁄4” (2 Req.) S23792 4539800C Capscrew, Hex 3⁄8-16x1” (4 Req.) S26826 4543802 Nut, Hex 1⁄2-13x7⁄16” (2 Req.) S23347 3639805A Washer, Lock S23038 4197


1 Case, Volute (CW) H01863 70881 Case, Volute (CCW) H01892 2 Impeller (CW) L03038 40272 Impeller (CCW) L03115 46886A Shaft Kit (CW) B07596 43806A Shaft Kit (CCW) B07597 46877 Ring, Wearing S04176 617911 Retainer, Mechanical Shaft Seal S11452 453114 Sleeve, Shaft S05974 420016 Bearing, Ball S15604 402618 Bearing, Ball S13396 426419 Frame H01838 26 Screw, Impeller 1⁄2-13x11⁄2” S23623 453332 Key, 1⁄2x4” S24214 668835 Inner Bearing Cap S05928 403237 Outer Bearing Cap Assembly S35277 40 Slinger, Water S10964 363669 Washer, Impeller S06319 427172 Ring, Thrust S06519 435173A Gasket, Volute S06271 402873B Gasket, Balance Ring S09943 402989 Seal, Mechanical Shaft S32693 3917115 Ring, Balance M05073 119 O-Ring S26471 4537800B Bolt, Sq. Head 1⁄2-13x21⁄4” (2 Req.) S23792 4539802 Nut, Hex (2 Req.) S23347 3639

CW (ONLY) .....................B69501w/Square Discharge .......B56372w/Mechanical seal** .......B69500

CW ..................................B73023CCW ...............................B73027

CW ..................................B66924CCW ...............................B61999

6A

6A

6A



BERKELEY HYDRAULIC DRIVE WATER PUMPS



1 Volute Case (CW) 300391 09412 Impeller 300389 0948*6 Shaft Kit (CW) 302485 4347*14 Shaft Sleeve 300373 1004*16 Single Row Ball Brg. 302449 3149*18 Double Row Ball Brg. 302450 314819 Bracket 302004 454422 Brg. Lock Nut 302481 381924 Impeller Nut 302480 314635 Drip Brg. Cap 302451 300437 Outer Brg. Cap 302453 404340 Slinger, Water 300558 217451A Lip Oil Seal 302446 3003*51B Lip Seal Oil 302447 3153*72 Thrust Washer 302009 315273 Case Gasket 300385 0954*78 Spacer Sleeve 302448 314789 Mech. Seal 302452 0972800 Cap Screw 350144 4543805B Lock Washer, Brg. 300379 3818*816A Retaining Ring Ext. 302482 3150*816B Retaining Ring. Ext 302484 2173*817 Retaining Ring Int. 302183 3151

*These parts make shaft replacement kit 302485 4347


1 Volute Case (CW) 301098 45292 Impeller (CW) 301097 4423*6 Shaft (CW) 302293 43487 Wear Ring 301101 453011 Retainer, Mech. Seal 302295 4531*14 Shaft Sleeve 300535 4200*16 Bearing, Ball (Inner) 302297 4026*18 Bearing, Ball (Outer) 302296 434919 Bracket 302292 26 Cap Screw (Impeller) 300549 453335 Inner Bearing Cap 302294 453435 Outer Bearing Cap 302305 4535*37 Brg. Shield 302303 40 Slinger, Water 300541 363651A Oil Lip Seal 302302 4196*51B Lip Oil Seal 302304 435069 Shake Proof-Lock Washer 300551 7155*72 Thrust Ring 300542 435173A Case Gasket 300552 402873B Gasket, Balance Ring 300545 402989 Mech. Shaft Seal 302299 3917*115 Balance Ring 303212 119 O-Ring 302300 4537*800A Cap Screw (12) 350283 4538800B Sq. Hd. Bolt (2) 354187 4539801 Stud (4) 302298 4540802A Hex Nut (4) 350025 3008802B Hex Nut (2) 300363 3639805A Lock Washer (Impeller) 301103 4197*816 Retaining Ring 300536 4352817 Retaining Ring 302301 4353


Model #B3ZRMS

Model #B4JRMBHS


1 Case, Volute 300392 38102 Impeller 300388 0950*6 Shaft Kit (CW) 302487 4389*14 Sleeve, Shaft 300373 1004*16 Bearing, Ball 302449 3149*18 Bearing, Ball 302450 314819 Frame 302004 4544*22 Locknut 302481 381924 Locknut, Impeller 302480 314635 Inner Bearing Cap 302451 3004*37 Bearing Cap, Outer 302453 404340 Slinger, Water 300558 217451A Seal, Oil 302446 300351B Seal, Oil 302447 3153*72 Ring, Thrust 302009 315273 Gasket, Volute 300385 0954*78 Sleeve, Spacer 302448 314789 Seal, Mechanical 302452 0972801 Stud (8), 3⁄8-16x11⁄2 350144 4543805B Lock Washer, Bearing 300379 3818*816A Ring, Retaining 302482 3150816B Ring, Retaining 302484 2173*817 Ring, Retaining 302083


Model #B6ZRHS

CW (ONLY) .....................B69875

CW (ONLY) .....................B69743

CW (ONLY) .....................B70374

More pump models available.



FRANKLIN WATER PUMPS


XS-9 Series Centrifugal PumpsDesigned for frame mounting, hydraulic drive and SAE engine drive.

• Heavy Duty Bearing Frame• Rugged 23⁄8” shaft• Hefty 11⁄4” Double Keyed Impeller Mount• Maximized Bearing Life 30,000 hours• Maximum Application Versatility• Space Saving Design

DESCRIPTION PART#439M PUMP 4X3 (CCW) GROOVE MECH SEAL 6988439M PUMP 4X3 (CW) GROOVE MECH SEAL 7026439M ENG DRIVE #5 MECH W/COUPLER 7502

Model #XS-439

Model #XS-13

XS-13 Series Centrifugal PumpsDesigned for frame mounting, SAE engine drive, close coupled motor drive with flow rates 300GPM thru 4000GPM up to 350 ft of head.

• Heavy Duty Bearing Frame• Rugged 21⁄2” Shaft• Hefty 15⁄8” Double Keyed Impeller Mount• Maximized Bearing Life 20,000 Hours• Replaceable Bronze Wear Rings• Bronze Impeller Minimizes Cavitation Damage

DESCRIPTION PART#XS-13 PUMP 3X4X13 CW FLANGE MECH 7517

XS-439 Parts ListMODEL # DESCRIPTION PART#

1 305462019 Volute Case (victaulic CW) 72811 305462035 Volute Case (victaulic CCW) 72802 305462008 Impeller - CW 70782 305462036 Impeller - CCW 70775 305462100 Shaft Kit 70766 305462037 Bearing Frame Packed Style Call6 305462038 Bearing Frame Mechanical Seal Style Call9 305462021 Bearing Frame Cover 730812 305462022 Shaft Sleeve 775215 305462033 Packing Gland (2 Piece) 774016 305462025 Bearing, Pump Side 828517 305463145 Bearing, Drive Side 707326 305463148 Lip Seal Pump/Drive Side (2 Req) 815730 305462028 Mechanical Seal Retaining Ring 736635 305450006 Impeller Shaft Key (2 Req) 827643 305462026 Bearing Snap Ring 736590 305462029 Mechanical Shaft Seal 7079100 305463138 Volute Case Gasket 8279503 305464015 Water Slinger 8271510 305462030 Impeller Hex Cap Screw 8277520 305462031 Impeller Washer 8278525 305462032 Impeller Lock Washer 8272Not Shown 305464032 Shaft Key Drive Side 7616

Hydraulic Coupler for 439 SeriesMODEL# PART#SAEB 7151



FRANKLIN FMIH-40 & ENGINE DRIVE WATER PUMPS


MODEL SIZE SOLIDS SHIP WT FLOW RANGE (GPM) PART#FMIH-40 4” 13⁄8 282 760 5460

FMIH-40 Frame Mount Self PrimingThe FMIH-40 heavy duty self priming pumps are of all iron construction and can be used for a wide variety of applications including abrasives, sand, mud, and silt.

• Stainless Steel Shaft• Semi-open impeller with replaceable wear plate• Viton and Stainless steel mechanical seal• Cast gray iron casing with large self priming capacity

FMIH-40 Hydraulic Adapter: see page 49.

FMIH-40 Parts ListMODEL# DESCRIPTION PART #

1 305455003 Pump Case 68762 305455006 Impeller 82763 305454009 Seal Plate 61885 305454015 Shaft 594116 305463036 Ball Bearing 618327 305455017 Hydraulic Adapter 938328 305455016 Coupling 843329 305463198 Set Screw (2-pack) 843435 305454017 Shaft Key 843838 305463039 Bearing Nut 618439 305463042 Bearing Lockwasher 618571 305455009 Wear Plate 649481 305454039 Seal Cover 618690 305463044 Mechanical Shaft Seal 5942100A 305454042 Case Gasket 6321100B 305454045 Flapper Valve 6955530C 305463059 Hex Nuts (6-pack) 8437

SUCT DISCHMODEL DESCRIPTION INP HP SHIP/WT PART#8BSGF-12H Honda, with 6 qt. tank 3”x3” 9 106 5654

BSGF SERIES – ENGINE DRIVEN – GENERAL PURPOSE LIQUID TRANSFERThe Monarch BSGF series of self priming engine driven pumps are designed for liquid transfer and contractor dewatering.• Fertilizer resistant Viton Mechanical seeal• Semi open cast iron impeller can handle small abrasives• Rugged cast iron casing prevents damage due to water hammer• Available with choice of Honda 9hp engine

JOHN DEERE/PERKINS – 100HP LIQUID COOLED ENGINEWith Berkeley or Franklin @ 1000+ GPM @ 125+PSI High Power & Torque

• Single Side Servicing• Natural, Turbo Charged or Turbo Charge-cooled

ENGINE DRIVE WATER PUMPS



UTE AIR OPERATED SPRAY HEAD KITS


AV1100 Front & Rear Adjustable Spray Assembly

DESCRIPTION WT/LB PART#A. 3” Nipple Weld x Groove 2 1486B. 3” Rigid Mount Coupling 3.6 0697C. 1⁄8” Quick Exhaust Valve 0.2 4520D. UTE AV1100 Valve 8.2 8030E. 3” Groove Coupling 3 0687F. UTE Adj. Spray Nozzle 2.6 3484(A-F) UTE Adj. Spray Noz. Assy 22.5 4038

AV1100 Side Spray Assembly

DESCRIPTION WT/LB PART#A. 3” Nipple Weld x Groove 2 1486B. 3” Rigid Mount Coupling 3.6 0697C. 1⁄8” Quick Exhaust Valve 0.2 4520D. UTE AV1100 Valve 8.2 8030E. 3” Groove Coupling 3 0687F. UTE Side Spray Nozzle 1.6 4069(A-F) UTE Side Spray Noz. Assy 19.5 4036

AV323G Inline Spray Assembly

DESCRIPTION WT/LB PART#A. 3” Nipple Weld x Groove 2 1486B. 3” Rigid Mount Coupling 7.2 0697C. 1⁄8” Quick Exhaust Valve 0.2 4520D. UTE AV323G Inline Valve 3 9386E. 90° Groove Elbow 3.8 0677F. 3” Groove Coupling 3 0687G. UTE Adj. Spray Nozzle 2.6 3484G. UTE Fan Spray Noz. (shown) 1.6 1048G. UTE Flusher Spray Nozzle 1.6 1045(A-G) UTE AV323G Inline Adjustable Spray

Nozzle Assembly 22 9416(A-G) UTE 323 Inline Fan Spray

Nozzle Assembly 21 9417(A-G) UTE 323 Inline Flusher Spray

Nozzle Assembly 22 9418

BC2410 Spray Head Valve Assembly

DESCRIPTION WT/LB PART#A. 3” Nipple Weld x Groove 2 1486B. 3” Rigid Mount Coupling 3.6 0697C. 90° Groove Elbow 3.8 0677D. UTE BC2410 SHV 9.7 6204(A-D) UTE BC2410 SHV Assy 24 4636E. Side Spray Attachment 3.5 1040

AV323G Inline Adjustable Slip-on Nozzle Spray Assembly

DESCRIPTION WT/LB PART#A. 3” Nipple Weld x Groove 2 1486B. 3” Rigid Mount Coupling 7.2 0697C. 1⁄8” Quick Exhaust Valve 0.2 4520D. UTE AV323G Inline Valve 3 9386E. Aluminum Elongated

90° Elbow BBE 2.5 7270F. Adjustable Slip-on

Nozzle 31⁄2” BBD 2 6117(A-F) UTE AV323G Inline Adjustable

Slip-on Nozzle Assembly 18 9415

31⁄2”

5/16”

AV1100 “Duckbill” Side Spray Assembly

DESCRIPTION WT/LB PART#A. 3” Nipple Weld x Groove 2 1486B. 3” Rigid Mount Coupling 3.6 0697C. 1⁄8” Quick Exhaust Valve 0.2 4520D. UTE AV1100 Valve 8.2 8030E. 3” Groove Coupling 3 0687F. UTE Flusher Spray Nozzle 1.6 1043F. UTE Fan Spray Nozzle 1.6 1048F. UTE Side Spray Nozzle 1.6 1045G. 90° Groove Elbow 3.8 0677(A-F) UTE Fan Spray Assy 20 4588(A-F) UTE Flusher Spray Assy 20 4037(A-G) UTE Side Spray Assy w/90° 28 4718(A-G) UTE Fan Spray Assy w/90° 27 5059(A-G) UTE Flusher Assy w/90° 24 4843

UTE Adjustable Spray Nozzle

A

B

C

D

E

B

A

B

C

DE

F

A

B

C

DE

F

G

A

B

C

D

E

F

B

C

D

E

F

A

B

C

D

E

F

A

B

BB



SPRAY HEAD NOZZLES


UTE BC2384 FAN NOZZLE3” Groove Premium AluminumDESCRIPTION WT/LB PART#7”x1⁄4” Slot Standard Fan Spray 1.6 1048

UTE BC2178 FLUSHER NOZ.3” Groove Premium AluminumDESCRIPTION WT/LB PART#7”x3/32” Slot Flusher Nozzle 1.6 1043

UTE BC2399 ADJ. NOZZLE 3” Groove Premium AluminumDESCRIPTION WT/LB PART#Adj. Slot Pattern & Volume Spray 2.6 3484Adjustable Band .56 3305

UTE SLIP-ON ELBOW 3” Groove by Slip-on Premium Aluminum90° Elongated Elbow for 31/2” BBDDESCRIPTION WT/LB PART#Elbow for 31⁄2” BBD Slip-On Noz. 2.5 7270

UTE MP2200 SIDE NOZZLE3” Groove Premium AluminumDESCRIPTION WT/LB PART#4”x1⁄4” Slot Side Spray Nozzle 2.0 7790

UTE FIN NOZZLE3” Groove Premium Aluminum2” Reduced FlowDESCRIPTION WT/LB PART#51⁄2” x 5/16” Slot Side Spray Nozzle 2.6 7017

UTE FAN NOZZLE 2” — 3” Thread SCH40 Black SteelSIZE WT/LB PART#2” 2.00 579121⁄2” 2.50 13513” 2.75 1352

UTE SIDE NOZZLE21/2” — 3” Groove SCH40 Black SteelSIZE WT/LB PART#21⁄2” 3.2 21603” 3.5 1392

BC2410 SIDE SPRAY ATTACHMENTStainless SteelDESCRIPTION WT/LB PART#51⁄2” x 5/16” 3.5 1040

UTE STEEL THREADED 21/2”— 3” Thread SCH40 Black SteelSIZE WT/LB PART#21⁄2” 3.2 13883” 3.5 1389

UTE BC2179 SIDE NOZZLE3” Groove Premium AluminumDESCRIPTION WT/LB PART#5”x1⁄4” Slot Side Spray Nozzle 1.6 1045

UTE ADJ. SLIP-ON NOZ.Slip-on Premium AluminumDESCRIPTION WT/LB PART#Adj. Slip-on Noz. 31⁄2” BBD 3.0 6117Adj. Slip-on Noz. 4” K2207 5.3 1053

FLUSHER STREET CLEANING NOZZLE21/2” Thread Elkhart BrassDESCRIPTION WT/LB PART#81⁄2”x1/16” Slot 9.25 5426

FLUSHER STREET CLEANING NOZZLE21/2” Thread BrassDESCRIPTION WT/LB PART#8”x3/16” Slot 12.5 1072

4”

K2207

3-1⁄2”

BBD

UTE FAN NOZZLE 2” — 3” Groove SCH40 Black SteelSIZE WT/LB PART#2” 2.00 384321⁄2” 2.25 13493” 3.25 1350

ADJUSTABLE SPRAY

FAN SPRAY

FLUSHING SPRAY

SIDE SPRAY

5/16”

51⁄2”

73⁄4” 73⁄4”

73⁄4”

71⁄2”

71⁄2”

31⁄4” 31⁄4”

53⁄4”

~4”

~4”

3/16”

5/16”

1⁄4”

3/16”

Adjustable Band

33⁄4”

53⁄4”

53⁄4”

53⁄4”

23⁄4”

1⁄4”

1⁄4”

3/32” 1/16” 3/16”

53⁄4” 103⁄4”

63⁄4”



UTE AV1100, AV9030E (PARTS ONLY), BC2410 SHV & REPAIR PARTS


UTE AV9030E VALVE3” Groove Premium AluminumValve body no longer available.• For complete valve replacement see

AV1100 to the left.• Repair parts available. See below.

DESCRIPTION WT/LB PART#A. Valve Cap 1 7132B. Cap Clamp 1 1038

Valve Body DISCONTINUED

DESCRIPTION WT/LB PART #A. Valve Cap 1 7132B. Cap Clamp 1 1038C. Valve Body 5 8145

AV1100 Valve 8 8030

UTE AV1100 VALVE3” Groove Premium AluminumAir to close, 3” groove ends for ease of mounting and maintenance. New flat disc seat design plus one extra drain hole (3 total). Premium quality aluminum to promote longevity.

UTE BC2410 SPRAY HEAD VALVE3” Groove Air Craft Quality AluminumAir to open (normally closed), 3” groove end for ease of mounting and maintenance. Spray Head Valve (SHV) with manually adjustable spray pat-tern. Made with air craft quality aluminum for less down time.

DESCRIPTION WT/LB PART#A. Valve Cap 1 7132B. Cap Clamp 1 1038C. Adjustable Band 1 1074D. BC2410 Body 6 7226

BC2410 SHV 9 6204

DESCRIPTION WT/LB PART#A. Diaphragm 0.25 1076B. Spring 0.20 1079C. Stem (Stainless) 1.00 1394D. Ball Seat 0.50 1073E. Rubber Washer 0.02 5008F. 71A Fastener Kit 0.20 3265(A-F) Unassembled Kit

(with spring) 0.20 4065

DESCRIPTION WT/LB PART#A. Spring 0.50 1056B. Aluminum Assembly 0.50 6720 C. Diaphragm 0.25 3106D. Black Ball Seat 0.25 4116(A-D) Assembled Kit


NOTICE: AV9030E Kit not compatible with AV1100 Valve.

DESCRIPTION WT/LB PART#A. Spring 0.50 8212B. Thread Bolt 0.05 6690 C. Plastic Top Retainer Disk 0.20 8140D. Rubber Punched Diaphram 0.25 3106E. Plastic Bottom Retainer Disk 0.50 8141F. Orange Poly Washer 0.50 8143 G. Plastic Nut 0.20 8142(A-D) Assembled Kit


NOTICE: AV1100 Kit not compatible with AV9030E Valve.

AV9030E Valve Internal Repair Kit

AV1100 Valve Internal Repair Kit

BC2410 Valve Internal Repair Kit

71⁄2”

93⁄4”

3”

3”

81⁄2”DISCONTINUED

3”

A

BC

D

E

F

G

A

B

C

D

E

AB

C

D

E

F

A

B

C

A

B

C

D



NETAFIM, AV323G & BERMAD INLINE VALVES & REPAIR PARTS


3” 59/16”

Inline Air Operated Valve - Air to Close Fittings are 3” x 3” and body flow is 2”

2” 313/16”

2” 71/16”3” 101/16”

2” 313/16”3” 59/16”

2” 81⁄8”

3” 97⁄8”

BERMAD 2” OR 3” THREAD OR GROOVECast IronInline Air Operated Valve - Air to CloseSIZE WT/LB PART#2” Thread 9 27152” Groove 9 30523” Thread 28 30353” Groove 23 3034

SIZE WT/LB PART#2” Thread 8 47252” Groove 6 4907

Internal Repair KitDESCRIPTION WT/LB PART#2” Spring 0.10 29762” Diaphragm 0.25 29773” Spring 0.34 38483” Diaphragm 0.79 3847

Netafim 2” and 323Internal Repair KitsA1. 1⁄8” Thick, Standard Diaphragm

Operating Range: 10-140 PSI

A2. 1⁄4” Thick, High Pressure DiaphragmOperating Range: 17-230 PSI

DESCRIPTION WT/LB PART#A1. Standard Diaphragm 0.22 1585A2. High Pressure Diaphragm 0.24 5590B. Button Seat 0.02 3883C. Spring 0.06 1588(A1, B, C) Low Pressure Complete Kit 0.30 6534(A2, B, C) High Pressure Complete Kit 0.32 6535

31⁄4”

77/16”

31⁄4”

77⁄8”

31⁄4” 31⁄4”

83⁄4” 77⁄8”

BERMAD 3” THREAD REDUCED FLOWCast IronInline Air Operated Valve - Air to CloseSIZE WT/LB PART#3” 14 5776

313/16”

81⁄2”

Internal Repair KitDESCRIPTION WT/LB PART#3” Reduced Flow Diaphragm 0.40 46143” Reduced Flow Spring 0.25 7762

43⁄4”

Internal repair kit shown below

Internal repair kit shown below

31⁄4”

B

C

A1 & A2

3” 61⁄8”

NETAFIM 2” THREAD OR GROOVECast IronInline Air Operated Valve - Air to Close

NETAFIM 323 THREAD OR GROOVECast Iron

SIZE WT/LB PART#323 Thread 12 4525323 Groove 9 4767

Internal Repair KitDESCRIPTION WT/LB PART#Diaphragm 0.25 9388

AV323G INLINE VALVE Aluminum 323 GrooveInline Air Operated Valve - Air to Close Fittings are 3” x 3” and body flow is 2”SIZE WT/LB PART#323 Groove 3 9386

31⁄4”

83⁄4”

31⁄4”

2” 41⁄4”



CLA-VAL & UTE AV5293 INLINE VALVES, BC2403 SHV, BC2403H SHV & REPAIR PARTS


8”

Internal Repair KitDESCRIPTION WT/LB PART#Repair Kit 1.50 4995

CLA-VAL 2” THREADEDCast IronInline Air Operated Valve - Air to CloseSIZE WT/LB PART#2” 11 4602

CLA-VAL 2-1/2” THREADEDCast IronInline Air Operated Valve - Air to CloseSIZE WT/LB PART#21⁄2” 20 5665

Internal Repair KitDESCRIPTION WT/LB PART#Spring 0.05 5032Repair Kit (spring not included) 0.50 4955

Internal Repair KitDESCRIPTION WT/LB PART#Diaphragm 0.25 5533Spring 0.12 1570Repair Kit (includes spring) 1.00 6025

SPRAY HEAD VALVEPremium Aluminum DESCRIPTION WT/LB PART#

BC2403H Hyd. SHV 23.00 7690A. Cap CALLB. Ring 1.20 5930C. Knob 0.20 5948D. O-Ring (shown above) 0.09 4009E. Hydraulic Cylinder 1.80 7685

Mount Nut (not shown) 0.25 7686

DESCRIPTION WT/LB PART #BC2403 SHV 11.70 5826(does not include E or F)

A. Cap 4.00 5928B. Ring 1.20 5930C. Knob 0.16 5948D. O-Ring 0.09 4009E. 1⁄4” Quick Exhaust Valve 0.40 6100F. Base Plate 1.70 5945(A-F) BC2403 SHV Assy 14.00 6016

3” Inline Valve Groove AluminumInline Air Operated - Air to Open DESCRIPTION WT/LB PART#A. Valve Cap 1.00 7132B. Cap Clamp 1.00 1038

3” Normally Closed Inline Valve 10.50 4612

BC2403 and BC2403H Internal Repair KitDESCRIPTION WT/LB PART#Spring 0.50 4008Diaphragm 0.25 1077Repair Kit (includes spring) 1.64 6017

EXTRA PARTS FOR HYDRAULIC VALVEJam Nut (not shown) 0.05 3266Hex Nut (not shown) 0.05 3267

Internal repair kit compatible with both

BC2403 & BC2403H

Internal Repair KitCompatible with UTE & Cla-ValDESCRIPTION WT/LB PART#A. Spring 0.12 1570B. Thread Stem 0.25 6617C. Top Disc Retainer 0.25 6615D. Diaphragm 0.25 1578E. Disc Retainer 0.25 6618F. Disc Gasket 0.05 6616G. Guide Disc Nut 0.05 6690 (A-G) Assembled Kit 1.25 2745

UTE AV5293 or CLA-VAL3” Thread Cast IronInline Air Operated Valve - Air to CloseDESCRIPTION WT/LB PART# UTE AV5293 3” Thread Air Valve 29 5293Cla-Val 3” Thread Air Valve 29 7927

NORMALLY CLOSED VALVE

61⁄2”

33⁄8”

71⁄2”

5”

8”

41⁄2”

UTE BC2403H HYDRAULIC

UTE BC2403 SPRAY HEAD VALVEPremium Aluminum

81⁄2”

81⁄4”

A

B

A

B

C

DE

FG

B

CA

E

A

B

C

D

E

F



CONTROLS FOR AIR, ELECTRIC & MANUAL VALVES


UTE JOYSTICK STANDDESCRIPTION DIMENSIONS WT/LB PART# HEIGHT I.D. BOX Stand for Monitor 13.5” 5 3⁄4“ x 5 3⁄4“ 3.77 7295 Joystick

UTE CONTROL CONSOLEDESCRIPTION WT/LB PART#2 Switches 3.34 39443 Switches 3.79 27284 Switches 4.16 26955 Switches 5 27296 Switches 5.5 27257 Switches 6.15 40508 Switches 6.47 4051UTE Console fitted with 1-way valves (1493).

MONITOR TOGGLE BOX BRACKETDESCRIPTION WT/LB PART#Bracket for Monitor Box 1.5 6924

Six Switch Console Pictured

(Stand only - joystick sold separately page 37)

MANUAL CONTROL BUTTERFLY VALVE (21⁄2” Groove pictured)DESCRIPTION SPECS WT/LB PART#A. Control Lever Used for 1⁄4” Cable w/3” TRVL 3.94 4458B. Lever Plate See Diagram 1.20 4459C. Control Base (1 EA) See Diagram 2.97 4475D. 84”Cable 1⁄4” - 28 Threads 2.56 4469D. 96” Cable 1⁄4” - 28 Threads 2.70 4470E. Cable Clevis 1⁄4” x 5/16” 0.15 4460F. Valve Lever 31⁄2” x 11⁄2” 0.15 4476G. Manual Control Pipe 1⁄2” ID x 1” 0.06 2018H. 21⁄2“ Grooved Butterfly Valve 7.76 4490I. Valve Bracket - Left See diagram 1.24 4477I. Valve Bracket - Right See diagram 1.24 4478(A-I) Assembly with One Valve - 84” Cable Left Side Bracket 20.00 6546(A-I) Assembly with One Valve - 84” Cable Right Side Bracket 20.00 6548(A-I) Assembly with One Valve - 96” Cable Left Side Bracket 22.00 6547(A-I) Assembly with One Valve - 96” Cable Right Side Bracket 22.00 6549

AIR CONTROL VALVESDESCRIPTION WT/LB PART#A. 1-way valve 0.33 1493B. 2-way air valve 0.57 1494C. 2-way push/pull 0.4 3375D. 2-way momentary 0.3 1492E. 3-way toggle 0.3 6029E. 4-way toggle 0.4 6028

DESCRIPTION WT/LB PART#A. Rocker Switch, Green LED Light 0.09 7635A. Rocker Switch, Red LED Light 0.09 7634B. PTO Switch 0.05 0898C. Electric Over Air 12V 0.5 3028D. Electric Over Air 24V 0.5 6625

ELECTRIC SWITCHES

111⁄2”

81⁄2” 21⁄2”

11⁄2”

21⁄2”

63⁄4”

10”

AIR CYLINDERSDESCRIPTION WT/LB THROW PART#6” Stroke 2.58 13 3⁄8 -6” 150010” Stroke 3.24 17 1⁄8 -10” 3904

73⁄4”

51⁄2”

31⁄8”

DESCRIPTION WT/LB PART#Regulator with 1⁄4” Ports 0.63 1597Regulator Bracket 0.10 2885

ADJUSTABLE REGULATOR & BRACKET

A

B

C

D E F

GH

I

A

B

C DE

A B

C D

(Bracket only - toggle boxsold separately page 37)



AIRLINE FITTINGS


AIRLINE & FITTINGS

BRANCH TEE1⁄4 x 1⁄8 x 1⁄4SIZE WT/LB PART#1⁄8” Thread 1⁄4” Hose 0.08 5548

UNIONSIZE WT/LB PART#1⁄4” Hose 0.04 5894

MALE RUN TEESIZE WT/LB PART#1⁄8” Thread 1⁄4” Hose 0.07 5545

BRASS NIPPLESIZE WT/LB PART#1⁄8” x 1⁄4” 7644

QUICK EXHAUST VALVESIZE WT/LB PART#1⁄8” 0.23 45201⁄4” 0.39 6100

BRASS BUSHINGSIZE WT/LB PART#1⁄8” x 1⁄4” 0.05 7642

BRASS PLUGSIZE WT/LB PART#1⁄8” 0.01 76381⁄4” 0.01 7639

AIR VENTSIZE WT/LB PART#Female 1⁄4” x Male 3⁄4” 1.23 4112

BRASS NIPPLESIZE WT/LB PART#1⁄8” 0.06 7643

PRESSURE VALVE PROTECTIONSIZE NOMINAL PSI WT/LB PART#1⁄4” x 1⁄8” Ports 70 0.35 6673

PUSH-ON TEESIZE WT/LB PART#1⁄4” Hose 0.02 7160

1⁄4” AIRLINE HOSESIZE WT/LB PART#25’ Roll 0.3 4255100’ Roll 1.2 0487

MALE SWIVEL ELBLOWSIZE WT/LB PART#1⁄8” Thread 1⁄4” Hose 0.05 5547

MALE CONNECTORSIZE WT/LB PART#1⁄8” Thread 1⁄4” Hose 0.02 5546

13⁄4”

1”

11⁄2”

11⁄8”

15⁄8”

5⁄8”

1⁄4”

61/5”

15⁄8”

3⁄4”

13⁄8”1”

23⁄8”

DRAIN VALVESIZE WT/LB PART#1⁄4” 0.03 7626

Air In

Air OutAir Venting



AIR OPERATED BUTTERFLY VALVES & ACTUATORS


AIR OPERATED BUTTERFLY VALVE ASSEMBLIES

AIR ACTUATORS AND BRACKETS

6” Wafer Butterfly Assembly2-Way Air Actuated Valve 6”SIZE DESCRIPTION WT/LB PART#6” Wafer Butterfly Air Actuated 29 1529

Air Actuator 2-Way Air Actuated for Wafer Butterfly Valves 2” - 5” DESCRIPTION WT/LB PART#Air Actuator, 2” - 3” 3.50 1503Bracket for 2” - 3” 3814Air Actuator, 4” - 5” 5.00 1504Bracket for 4” - 5” 3815

Groove Butterfly Assembly2-Way Air Actuated Valve 21/2” – 4”SIZE A(IN) B(IN) C(IN) WT/LB PART#21⁄2” 8.66 3.56 5.75 13 48683” 9.16 3.56 5.75 14 33794” 10.92 3.56 5.75 14 4447

Air Actuator 2-Way Air Actuated for 6” Butterfly ValvesDESCRIPTION WT/LB PART#Air Actuator 6” 8.00 4003Bracket for Part# 4003 0.10 4367Repair Kit for Part# 4003 1.00 4956

WT/LB PART#A. 2-way Control Valve 0.57 1494B. 2-way Push Pull 0.4 3375

See page 32 for more control valves.

Wafer Butterfly Assembly2-Way Air Actuated Valve 21/2” - 6”Stainless Steel Stem & DiscSIZE A(IN) B(IN) WT/LB PART#21⁄2” 14.38 6.38 CALL3” 14.83 6.38 12 91574” 16.32 6.38 16 91586” 19.43 9.35 26 9159

Air Actuator 2-Way Air Actuated for Grooved Butterfly Valves 2”-4”DESCRIPTION WT/LB PART#Air Actuator 2” - 4” 4.00 6341Bracket for 2” - 31⁄2” 0.80 6343Bracket for 4” 0.80 8177

2-Way Control Valves

A

B

A B

C

53⁄4”

141⁄4”

A

B



ELECTRIC OPERATED VALVE ASSEMBLIES & ACTUATORS


Wafer Butterfly AssemblySIZE DESCRIPTION WT/LB PART#21⁄2” Wafer Butterfly 12V Actuator 16 49233” Wafer Butterfly 12V Actuator 12 45523” Wafer Butterfly 24V Actuator 12 84164” Wafer Butterfly 12V Actuator 24 59864” Wafer Butterfly 24V Actuator 24 6005

Groove Butterfly AssemblySIZE DESCRIPTION WT/LB PART#21⁄2” Groove Butterfly 12V Actuator 13.5 55613” Groove Butterfly 12V Actuator 14 5148

12V or 24V Actuated Valve 21⁄2” – 4” 12V or 24V Actuated Valve 21⁄2” – 3”

ELECTRIC OPERATED VALVE ASSEMBLIES

ELECTRIC ACTUATORS AND BRACKETS

ELECTRIC OPERATED SPRAYHEAD VALVES & SOLENOIDS

24V Actuator for 3-4” Butterfly ValvesDESCRIPTION WT/LB PART#Actuator, 24V (4” Valve) 5 8390

12V/24V Bracket/Couplerfor Electric ActuatorDESCRIPTION WT/LB PART#Bracket/Coupler for 12V/24V Actuator 1.5 4397

12V Electric Actuatorfor 2-4” Butterfly ValvesDESCRIPTION WT/LB PART#Actuator, 12V (2”-4” Valves) 4 9313

Note: Some modifications of valve stem may be required.

12V or 24V SPRAY HEAD VALVE ASSEMBLY DESCRIPTION WT/LB PART#A. 3” Nipple Weld x Groove 2 1486B. 3” Rigid Mount Coupling 3.6 0697C. 90° Groove Elbow 4 0677D. 12V Spray Head Valve 11 4875D. 24V Spray Head Valve 11 6008(A-D) BC2410 Sprayhead Assy 12V 20 5251

12V Electric SolenoidDESCRIPTION WT/LB PART#12V Electric Solenoid 0.63 551024V Electric Solenoid 0.63 7480

Diesel engine drive plumbing kit with Electric Groove Butterfly Assemblies and BC2399

adjustable spray heads.

Hydraulic hook tank with electric over air conversion, American hose reel, beacon lights

and BC2410 sprayhead valves..

AB

C

D

B



MANUAL VALVES


Hose Bibb BrassSIZE WT/LB PART#3⁄4” 0.60 1552

Ball Valve BrassSIZE WT/LB PART#1⁄4” 0.34 33773⁄8” 0.54 15091⁄2” 0.59 15103⁄4” 0.62 15111” 0.94 173711⁄4” 2.13 367611⁄2” 2.22 15142” 3.35 151621⁄2” 4.55 15183” 7.07 22434” 10.23 3526

Gate Valve BrassSIZE WT/LB PART#1⁄2” 0.61 57963⁄4” 0.89 66331” 1.07 154411⁄4” 1.49 154511⁄2” 2.00 15462” 3.33 154721⁄2” 5.96 26443” 8.05 1549

Lug Butterfly Valve NOTICE: Bolt holes are threaded.SIZE A(IN) B(IN) WT/LB PART#21⁄2” 91⁄4” 91⁄2” 11.5 49823” 10” 91⁄2” 12.0 15244” 111⁄4” 111⁄2” 18.0 32646” 131⁄2” 111⁄2” 27.0 5289

Wafer Butterfly ValueSIZE A(IN) B(IN) WT/LB PART#2” 81⁄2” 91⁄2” 8.5 152121⁄2” 91⁄4” 91⁄2” 10.5 43173” 10” 91⁄2” 11.0 26574” 111⁄4” 111⁄2” 14.0 15255” 121⁄2” 111⁄2” 17.5 34956” 131⁄2” 111⁄2” 21.0 268610” 181⁄2” na 56.0 2798

Groove Butterfly ValveSIZE A(IN) B(IN) WT/LB PART#2” 8.45 9.5 6 568421⁄2” 8.66 9.5 7 44903” 9.16 9.5 8.4 46914” 10.96 11.5 12.5 36065” 11.91 11.5 18 27016” 14.33 11.5 37 4874

Lever Gate Valve BrassDESCRIPTION WT/LB PART#3” Lever Gate 8.5 29194” Lever Gate 14.0 1594

Piston Gate Valve BrassSIZE WT/LB PART#4” Piston Gate 8.5 1595

MANUAL VALVES

DESCRIPTION PART#3” Groove with 3⁄4” Threaded Outlet 6612

UTE Bibb CapSCH 40 Black Steel

See page 46

A

A

A

B B B



ELKHART ELECTRIC SIDEWINDER 8494 & REPAIR PARTS


Sidewinder 2” 12 & 24 Volt Electric Water Monitor DESCRIPTION WT/LB PART#12V Monitor (no nozzle/no control) 18 524724V Monitor (no nozzle/no control) 18 730912V Monitor w/Nozzle & Toggle Control 21 351612V Monitor w/Nozzle & Joystick Control 25 455324V Monitor w/Nozzle & Toggle Control 21 612324V Monitor w/Nozzle & Joystick Control 25 6115

Remote fog nozzle - 350 GPM

Elkhart 5000-24 Nozzle Assy 350 GPMMODEL# VOLTS WT/LB PART#5000-24 12V 3.5 49875000-24 24V 3.5 7310

DESCRIPTION WT/LB PART#1.5” NST Tip 0.5 44881” Discharge 4.5” Length Call

Model 187Afor Sidewinder

REMOTE CONTROL MONITORSSidewinder 8494

CONTROL OPTIONS

Joystick ControlMODEL# WT/LB PART#81172001 5.6 4713Stand 3.8 7295

Toggle Box ControlMODEL# WT/LB PART#81122001 1.25 4712Bracket 6924

21⁄2” NST

2” NPT

(Bracket sold separately)

(Stand sold separately)

NOTICE: Please verify voltage.

Elkhart 5000-24 Noz. Actuator AssyMODEL# VOLTS WT/LB PART#81186001 12V 1.6 663181227001 24V 1.6 8217

Motor AssembliesDESCRIPTION VOLTS MODEL# WT/LB PART#Up/Down (slow) 12V 81119001 1.7 5061Left/Right (fast) 12V 81147000 1.7 5030Up/Down (slow) 24V 8120700 1.7 6891Left/Right (fast) 24V 8124001 1.7 7501

Sidewinder 8494 Repair Parts DESCRIPTION MODEL # QTY PART #1 Monitor Outlet Body 17908001 1 62992 Balls-0.250 S/S 15027000 144 64643 O-Ring 57502000 2 61534 Set Screw 63687000 5 75346 Roll Pin 51248000 2 64847 Over-Ride Nut 47652001 2 64858 Screw 65140000 1 774710 Screws 65139000 3 774811 Washer 71176000 3 794513 Position Sensor 65104000 2 730614 Monitor Inlet Body 18219001 1 748416 Drive Screw S/S 61215100 4 933217 Base-2” NPT 17975001 1 795618 Cap Screw S/S 64072000 8 663019 Motor Assy, 12V Slow (Up/Down) 81119001 1 506119 Motor Assy, 12V Fast (Left/Right) 81147001 1 503019 Motor Assy, 24V Slow (Up/Down) 81207001 1 689119 Motor Assy, 24V Fast (Left/Right) 81240001 1 750120 5’ Quick Connect Harness Extension 36791200 1 694523 Monitor Control Harness 36833100 1 714925 Thrust Washer 71515000 4 723526 Thrust Bearing 17701000 2 649227 Set Screw S/S 65201000 2 723428 Coupling 20991001 2 649129 Set Screw S/S 65219000 2 724230 Solid Pin 51071000 2 723931 Worm Shaft S/S 63935901 2 726432 Spacer 63601001 2 724033 Thrust Washer 71516000 4 648634 Thrust Bearing 17702000 2 648735 O-Ring 57380000 2 724136 Magnets 46054000 4 7231



ELKHART VULCAN 8500-02, HARNESSES, MODULES & PARTS


2” Electric Water Valve KitMODEL# DESCRIPTION PART#81181001 12V Water Valve Kit CALL

Control Module AssemblyMODEL# WT/LB PART#81713000 1.5 5808

Vulcan Manual Water Monitor (Cannon)DESCRIPTION WT/LB PART#Manual Monitor 22.0 5809Manual Monitor w/Brass Cone Nozzle 24.4 6550A. 21⁄2” NST Brass Cone Nozzle 2.4 1066

MANUAL MONITORVulcan 8500-02

HARNESSES•MODULES•ACCESSORIES

Harness from Control Module to Toggle/JoystickLENGTH MODEL# WT/LB PART#12’ 36787000 1.8 533250’ 36795000 8 6135

Harness Extension from Monitor to Control ModuleLENGTH MODEL# WT/LB PART#5’ 36791200 1.1 694530’ 36791000 1.1 5707

3” Weld Flange

21⁄2” NST

Vulcan 8500-02 Repair Parts MODEL# DESCRIPTION QTY PART#2 63674000 Set Screw 2 68655 57312000 O-Ring 1 77776 15027000 0.25 Dia Ball S/S 2 x 46 64647 23544000 Cover - Pressure Gauge 1 79218 39130000 Pressure Gauge 1 709511 57316000 O-Ring 1 734712 15027000 0.25 Dia Ball S/S 2 x 51 646413 15616001 Base - 3.0” 150# Flange 1 610316 61215100 Drive Screw 4 933218 63688000 Set Screw 2 686620 33645000 Handle Grip 1 7716

A

1 1 2

2

3

3

4

4



AMERICAN REELS & REPAIR PARTS


1” & 11/2” Manual Hose Reel OVERALL FRAMEHOSE SIZE MODEL# A(HEIGHT) B(WIDTH) C(DEPTH) D(WIDTH) E(DEPTH) WT/LB PART#1” x 50’ AC10050-22 231⁄2” 15” 22” 13” 20” 115 830011⁄2” x 50’ AC15050-22 231⁄2” 19” 22” 17” 20” 120 826911⁄2” x 100’ AC15100-28 291⁄2” 24” 28” 22” 20” 125 8301

1” & 11/2” Electric Motor Driven Hose Reel OVERALL FRAMEHOSE SIZE MODEL# A(HEIGHT) B(WIDTH) C(DEPTH) D(WIDTH) E(DEPTH) WT/LB PART#1” x 50’ AE15050-22 231⁄2” 21” 22” 16” 20” 155 83021” x 100’ AE15100-28 291⁄2” 26” 28” 21” 20” 170 8303

Swivel Joint Housing 1/2”MODEL# WT/LB PART#29-2 4 9127

Motor 12 VoltDESCRIPTION WT/LB PART#1⁄3 HP Non-Explosion Proof 12 84211⁄2 HP Explosion Proof 12 9317

Pillow Block 3⁄4”MODEL# WT/LB PART#50-8A 1.5 8424

Crank HousingMODEL# WT/LB PART#40-1AG 3.5 8425

Swivel Joint 11/2” MODEL# WT/LB PART#29-15D 10 8422

Crank Handle 8”MODEL# WT/LB PART#58-1A 3 8426

Packing Kit 11/2”MODEL# PART#150-23K (Kit) 8423A. 150-2 8505

Crank Housing Brake PartsDESCRIPTION PART#A. Brake Knob 8427B. Brake Stud 8428C. Brake Spring 8429

REPLACEMENT PARTS

A

See page 48 for hose reels assemblies.

Front view of hose reel

Side view of hose reel

Solenoid for Electric ReelsDESCRIPTION WT/LB PART#REEL20877 0.7 3881

Circuit BreakerDESCRIPTION WT/LB PART#REEL20878 0.14 3880

Push Button SwitchDESCRIPTION WT/LB PART#REEL20876 0.08 3882

B

C

A



COX REELS & REPAIR PARTS


1” & 11/2” BEXX Manual Hose Reel OVERALL FRAMEHOSE SIZE MODEL# A(HEIGHT) B(WIDTH) C(DEPTH) D(WIDTH) E(DEPTH) WT/LB PART#1” x 50’ 1175-6-50 261⁄4” 243⁄4” 24” 127⁄8” 201⁄8” 67 39981” x 100’ 1175-6-100 261⁄4” 283⁄4” 24” 167⁄8” 201⁄8” 70 3997

11⁄2” x 50’ 1185-1124 25” 241/16” 24” 171/16” 223/16” 76 632911⁄2” x 100’ 1185-2024 25” 3411/16” 24” 241/16” 223/16” 94 6336

1” & 11/2” BEXX Electric Motor Driven Hose Reel OVERALL FRAMEHOSE SIZE MODEL# A(HEIGHT) B(WIDTH) C(DEPTH) D(WIDTH) E(DEPTH) WT/LB PART#1” x 50’ 1175-6-50E 261⁄4” 203⁄8” 24” 127⁄8” 201⁄8” 93 63321” x 100’ 1175-6-100E 261⁄4” 243⁄8” 24” 167⁄8” 201⁄8” 96 6953

11⁄2” x 50’ 1185-1124E 25” 263/16” 24” 171/16” 223/16” 102 647111⁄2” x 100’ 1185-2024E 25” 3411/16” 24” 241/16” 223/16” 120 6735

Push Button SwitchDESCRIPTION WT/LB PART#REEL20876 0.08 3882

Solenoid for Electric ReelsDESCRIPTION WT/LB PART#REEL20877 0.7 3881

11/2” BEXX SwivelDESCRIPTION MODEL# WT/LB PART#BEXX Swivel 20288-2 0.03 9499

Retaining RingDESCRIPTION MODEL# WT/LB PART#Retaining Ring (Spiral) 20266 0.02 4039Retaining Ring 20252 0.01 5025

Circuit BreakerDESCRIPTION WT/LB PART#REEL20878 0.14 3880

Bearing AssemblyDESCRIPTION MODEL# WT/LB PART#Bearing assembly 8166 1.20 6818

Lock Pin (Manual Reels)DESCRIPTION MODEL# WT/LB PART#Locking pin 20843 0.23 3542

Axle AssemblyDESCRIPTION MODEL# WT/LB PART#Replacement axle 8169-11.5 10.40 7377

Crank AssemblyDESCRIPTION MODEL# WT/LB PART#Replacement crank 8191 2.20 7301

O-Ring KitDESCRIPTION MODEL# WT/LB PART#O-Ring Kit for BEXX Swivel 8970-2 0.03 9475

Washer BearingDESCRIPTION MODEL# WT/LB PART#Washer Bearing 20264 0.03 4040

Stationary

Replacement Parts for 1185 Series

A C

ED

A C

E

D

See page 48 for hose reels assemblies.

B

B



HOSE BARBSCAMLOCS, HOSE BARBS & SWIVELS


SIZE LENGTH WT/LB PART#11⁄2” 21⁄4 0.30 05672” 21⁄2 0.40 057321⁄2” 23⁄4 0.55 05783” 27⁄8 0.85 05854” 31⁄4 1.50 3205

SIZE LENGTH WT/LB PART#11⁄2” 3 0.75 05682” 3 0.85 057421⁄2” 31⁄2 1.20 05793” 34/5 1.70 05864” 41⁄8 2.20 3327

SIZE LENGTH WT/LB PART#11⁄2” 47⁄8 0.90 29802” 51⁄2 1.15 264521⁄2” 6 1.50 05803” 63⁄8 2.00 05874” 71⁄4 3.20 3091

SIZE LENGTH WT/LB PART#11⁄2” 21⁄2 0.75 24062” 27⁄8 0.90 057521⁄2” 3 1.50 05813” 31⁄4 1.75 05884” 35⁄8 2.60 2834

TYPE A Male Cam x Female Thread

TYPE B Female Cam x Male Thread

TYPE C Female Cam x Hose Shank

TYPE D Female Cam x Female Thread

CAMLOCS

SIZE THREAD O.D. CAMLOC 11⁄2” 13⁄4 2 2” 21⁄2 23⁄8 21⁄2” 3 33⁄4 3” 33⁄8 31⁄2 4” 43⁄4 41⁄2

CAMLOC SPECS

SIZE LENGTH WT/LB PART#11⁄2” 51⁄8 0.60 33902” 53⁄4 0.70 563021⁄2” 61⁄2 1.20 05823” 69/16 1.40 05894” 81⁄8 2.45 4625

TYPE E Male Cam x Hose Shank

SIZE LENGTH WT/LB PART#11⁄2” 31⁄8 0.50 05712” 37⁄8 0.70 057621⁄2” 41⁄8 1.00 05833” 41⁄8 1.10 05904” 49/16 2.15 0597

SIZE LENGTH WT/LB PART#11⁄2” 113/16 0.75 05722” 21⁄8 0.90 301521⁄2” 213/16 1.30 28353” 23⁄8 1.15 27224” 23⁄8 1.75 0598

Type V Female Cam Dust Cap

TYPE F Male Cam x Male Thread

SIZE LENGTH WT/LB PART#11⁄2” 41⁄8 0.70 26122” 45⁄8 1.15 562921⁄2” 59/16 2.00 07053” 515/16 3.00 07064” 75/16 4.50 3259

SIZE LENGTH WT/LB PART#1” 37/16 0.30 288111⁄2” 41⁄4 0.61 13022” 45⁄8 0.90 130321⁄2” 51⁄2 1.00 13063” 6 2.80 13074” 73/16 4.39 30665” 913/16 9.20 35216” 11 11.40 5168

SIZE LENGTH WT/LB PART#21⁄2” 55⁄8 2.17 16523” 57⁄8 2.90 16533” 71⁄4 5.00 4158

SIZE THREAD TYPE WT/LB PART#11⁄2” NPT 0.56 433011⁄2” NST 0.69 426111⁄2” JIC 1.20 51982” NPT 1.06 429121⁄2” NPT 1.24 331421⁄2” NST 1.34 3315

Hose Shank by SwivelNPT, NST, JIC

Groove by Hose Barb NippleMalleable Steel

Thread by Hose Barb NippleMalleable Steel

Weld by Hose Barb NippleMalleable Steel

Style 20 SwivelSIZE LENGTH WT/LB PART# A (IN) B (IN)11⁄2” 31⁄2 4 1.40 52243” 53⁄4 53⁄4 3.55 1030

Style 30 SwivelSIZE LENGTH WT/LB PART# A (IN) B (IN)11⁄2” 43/16 515/16 1.75 56252” 41⁄4 75⁄8 3.00 37053” 6 91⁄2 4.70 3981

Style 40 SwivelSIZE LENGTH WT/LB PART# A (IN) B (IN)3” 6 123⁄8 5.50 28604” 73⁄4 153⁄4 10.75 3045

A

B

A

B

A

B

SWIVELS



HOSES, NOZZLES, STRAINERS & CLAMPS


FOOT VALVES & STRAINERS

NOZZLES HOSE CLAMPSHOSES

Suction Fill HoseSIZE LENGTH WT/LB PART#3” 15’ 25 40583” 20’ 30 20323” 25’ 37 4769

Hose Reel HoseSIZE LENGTH WT/LB PART#1” 50’ 28.5 38001” 100’ 48.0 325711⁄2” 50’ 45.0 074411⁄2” 100’ 91.0 0743

3” MPT x Female Cam Lock

Hydrant Fill HoseSIZE LENGTH WT/LB PART#21⁄2” 15’ 8 519921⁄2” 25’ 10 393221⁄2” 50’ 20 5864

Jet Feed HoseSIZE LENGTH WT/LB PART#11⁄2” 25’ 6 298111⁄2” 50’ 10 280011⁄2” 100’ 12 53422” 50’ 18 5741

21⁄2” Female NST Swivel x Female Camloc

11⁄2” MPT x 11⁄2” MPT

SIZE THREAD TYPE WT/LB PART#1” NPT 1.2 698211⁄2” NPT 1.4 107111⁄2” NST 1.4 48002” NPT 2.8 385221⁄2” NPT 7.4 1069

SIZE THREAD TYPE WT/LB PART#1” NPT 0.4 31301” NST 0.4 562611⁄2” NPT 0.2 106811⁄2” NST 0.2 33702” NPT 0.2 512121⁄2” Nozzle Bracket 0.6 70983” Nozzle Bracket 0.6 7097

Adjustable Brass Fog Nozzle

Plastic Adjustable Hose Nozzle

(from stream to 120°)

Suction Hose Foot ValveTHREAD SIZE WT/LB PART#21⁄2” 6.75 82883” 8.01 15354” 17.90 1536

Double Bolt ClampSIZE WT/LB PART#3” 1.59 433431⁄2” 1.85 433541⁄2” 2.11 5123

SIZE WT/LB PART#11⁄2” 0.10 31272” 0.12 06103” 0.15 061131⁄2” 0.17 0612

Tool for preformed clamps v3.02 5503

Suction Hose StrainerTHREAD SIZE LENGTH WIDTH WT/LB PART#3” (3⁄8” holes) 5 3 7⁄8 3.0 10843” 95⁄8 4 1.8 10854” (3⁄8” holes) 53/16 6 7⁄8 3.1 1086

T-Bolt ClampSIZE WT/LB PART#21⁄4” 0.15 424721⁄2” 0.15 537023⁄4” 0.15 53713” 0.15 460831⁄2” 0.15 462041⁄2” 0.18 5506

Punch Clamp ToolPreformed Clamp

Must have banding tool

SIZE THREAD TYPE WT/LB PART#11⁄2” NPT 1.0 285211⁄2” NST 1.0 53302” NPT 1.8 448621⁄2” NST 2.4 1066

Brass Straight Stream Nozzle



GASKETS, BOLTS & REPAIR KITS


GASKETS REPAIR KITS

SIZE WT/LB PART#3” 0.13 43124” 0.17 43136” 0.23 43148” 0.29 4315

Groove Coupling Reducer Gasket

Gasket for Dresser Couplings

SIZE WT/LB PART#21⁄2” 0.02 4965

SIZE DESCRIPTION WT/LB PART#11⁄2” for 11⁄2” Plastic Nozzle NST/NPT 0.01 366721⁄2” for 21⁄2” Brass Nozzle NST/NPT 0.03 5980

SIZE DESCRIPTION WT/LB PART#3” Complete 1.00 48963” Flapper Insert Only 0.09 7608

SIZE WT/LB PART#21⁄2” 0.11 32383” 0.30 33954” 0.40 6808

SIZE WT/LB PART#3” 0.14 40784” 0.17 4079

Gasket for NST Swivel

Gaskets for Spray Nozzles

Repair Kits for Foot Valves

Groove Coupling Nut/Bolt

Swivel Repair KitStyle 20-40

SIZE WT/LB PART#1” 0.05 452111⁄2” 0.07 36002” 0.08 172921⁄2” 0.09 07003” 0.11 07014” 0.21 07025” 0.26 50566” 0.30 1959

SIZE WT/LB PART#3” x 2” 0.16 50133” x 21⁄2” 0.14 50394” x 3” 0.29 3859

Groove Coupling Gasket

SIZE WT/LB PART#21⁄2” 0.12 40913” 0.13 23654” 0.18 16495” 0.19 16476” 0.23 1648

Flange Gasket

Gasket for Camloc FittingsSIZE WT/LB PART#11⁄2” 0.03 30202” 0.04 056021⁄2” 0.04 05613” 0.05 05624” 0.07 2971

Where the dust settles…



NIPPLES & COUPLERS


NIPPLES

SIZE WT/LB PART#I.D. O.D. LENGTH11⁄2” 17⁄8 3 0.75 21282” 21⁄4 3 1.00 275121⁄2” 23⁄4 3 1.75 12983” 31⁄2 3 2.00 12994” 41⁄2 3 2.50 4000

SIZE WT/LB PART#I.D. O.D. LENGTH11⁄2” 17⁄8 3 1.00 22232” 21⁄4 3 1.00 468621⁄2” 23⁄4 3 1.50 14853” 31⁄2 3 2.00 14863” x 41⁄2” 31⁄2 41⁄2 3.00 8442 3” x 8” 31⁄2 8 5.00 30954” 41⁄2 4 4.00 27474” x 7” 41⁄2 7 6.00 19585” 53⁄4 4 4.00 52956” 63⁄4 6 8.50 4495

SIZE WT/LB PART#I.D. O.D. LENGTH11⁄2” 17⁄8 3 0.50 33192” 21⁄4 3 0.55 332021⁄2” 23⁄4 3 0.75 14883” 31⁄2 3 1.50 14894” 41⁄2 3 2.73 4134

Thread by Groove NippleSCH 40 Black Steel

Groove by Weld NippleSCH 40 Black Steel

Thread by Weld NippleSCH 40 Black Steel

SIZE WT/LB PART#11⁄2” 2.00 06842” 2.00 068521⁄2” 2.20 06863” 3.00 06874” 4.50 06895” 6.00 06916” 8.25 0692

SIZE WT/LB PART#I.D. O.D. LENGTH1⁄2” 3⁄4 11⁄4 0.05 68611” 11⁄8 11⁄2 0.14 176311⁄2” 17⁄8 13⁄4 0.30 12922” 21⁄4 2 0.44 129321⁄2” 23⁄4 21⁄4 0.84 12943” 31⁄2 31⁄2 1.00 12954” 41⁄2 4 1.75 1296

SIZE WT/LB PART#2” 2.30 194121⁄2” 3.00 06963” 3.60 06974” 6.00 06986” 8.25 4248

SIZE WT/LB PART#2” 2.00 267421⁄2” 3.00 22093” 3.50 06934” 5.30 5987

SIZE LENGTH (WT/LB)/PART#I.D. 4” 6” 8” 12”1 ” (0.72)/5667 11⁄2” (0.75)/4557 (1.19)/1276 65532” (0.94)/1277 (1.55)/1278 (0.20)/509821⁄2” (2.29)/1281 (3.06)/4450 (5.00)/12793” (1.80)/2505 (2.87)/1284 (4.09)/3670 (6.38)/12834” (4.50)/1287 (5.68)/3999 (6.75)/5047

Groove Coupling (Flexible)

Thread Close NippleSCH 40 Black Steel

Groove Coupling (Rigid Mount)

Groove Coupling (Quick Disconnect)

Thread Nipple with ShoulderSCH 40 Black Steel

A

B

COUPLINGS

SIZE MEASUREMENT WT/LB PART# A (IN) B (IN)21⁄2” 21⁄4 3 1.17 39963” 2 3 1.49 39383” 3 4 1.88 60203” 33⁄4 41⁄2 2.00 4904

Groove by Notch NippleSCH 40 Black Steel

SIZE WT/LB PART#21⁄2” x 2” 2.80 27503” x 2” 4.50 27643” x 21⁄2” 4.10 06944” x 3” 6.50 0695

Groove Coupling Reducer

SIZE LENGTH WT/LB PART#1⁄2”* 3⁄4” 0.10 691611⁄2” NA 0.70 12282” 21⁄4” 1.00 12292 1⁄2” 31⁄8” 1.25 12303” 31⁄4” 3.00 12313”* 13⁄4” 1.50 67054” 35⁄8” 4.50 1233* Half Coupler

SIZE WT/LB PART#3” 6.15 55234” 6.45 4299

Dresser Pipe Coupling

Thread Coupler



ELBOWS & FLANGES


FLANGES

SIZE MEASUREMENT WT/LB PART# A (IN) B (IN)2” 43⁄8 43⁄8 1.90 06752 1⁄2” 51/5 51/5 2.77 06763” 515/16 515/16 3.77 06774” 71⁄4 71⁄4 7.39 06785” 81⁄4 81⁄4 11.28 2988

SIZE MEASUREMENT WT/LB PART# A (IN) B (IN)3⁄4” 2 2 0.25 747011⁄2” 3 3 1.07 33842” 33⁄4 33⁄4 1.84 124721⁄2” 41⁄2 41⁄2 2.80 12483” 51⁄2 51⁄2 4.29 12494” 61⁄2 61⁄2 7.30 3278

SIZE MEASUREMENT WT/LB PART# A (IN) B (IN)21⁄2” 51⁄8 51⁄8 2.85 07103” 53⁄4 713/16 6.59 0711

SIZE MEASUREMENT WT/LB PART# A (IN) B (IN)2” 41⁄4 41⁄4 1.80 681021⁄2” 3 3 1.86 48323” 55⁄8 55⁄8 2.72 06734” 7 7 5.46 2458

SIZE MEASUREMENT WT/LB PART# A (IN) B (IN)11⁄2” 31⁄3 35/16 0.79 16242” 41⁄8 41⁄8 1.50 162521⁄2” 43/16 43/16 3.22 162621⁄2”SR 4” 4” 1.87 16273” 61⁄4 61⁄4 4.61 16283”SR 43⁄4” 43⁄4” 3.25 16294” 81⁄8 81⁄8 8.13 16314”SR 6 6 5.95 16325” 101/5 101/5 15.73 16336” 121⁄3 121⁄3 22.88 4679

SIZE MEASUREMENT WT/LB PART# A (IN) B (IN)11⁄2” 33/16 33/16 1.31 39392” 35⁄8 35⁄8 2.09 125121⁄2” 41⁄2 41⁄2 3.30 12523” 55/16 55/16 4.93 12534” 69/16 69/16 8.97 1254

SIZE MEASUREMENT WT/LB PART# A (IN) B (IN)11⁄2” 23⁄4 23⁄4 0.80 677721⁄2” 41⁄4 41⁄4 1.54 16163” 5 5 2.52 16184” 61⁄4 61⁄4 4.62 16205” 7 7 7.54 16216” 91⁄2 91⁄2 11.01 3986

Groove Elbow (90°)Cast Iron

Thread Female (45°)Malleable Iron

Groove by Thread (90°)Cast Iron

Weld Fitting (90°)SCH 40 Black Steel

Thread Female (90°)Malleable Iron

A

B

A

A

B

A

Groove Elbow (45°)Cast Iron

A

B

Weld Fitting (45°)SCH 40 Black Steel

45° ELBOWS 90° ELBOWS

SR - Short Radius

A

B

SIZE MEASUREMENT WT/LB PART# A (IN) B (IN)1⁄2” 17/16 21⁄4 0.25 68633⁄4” 13⁄4 25⁄8 0.43 21111” 21/16 31/16 0.65 229111⁄4” 21⁄2 35⁄8 0.95 131311⁄2” 27⁄8 315/16 1.33 13142” 35/16 43⁄4 2.67 131521⁄2” 4 53⁄4 3.85 13163” 413/16 611/16 5.47 13174” 57⁄8 8 3⁄4 9.18 5017

Thread Street (90°)Malleable Iron

SIZE MEASUREMENT WT/LB PART# BOLT HOLES B (IN)2” 4 33⁄8 4.25 125821⁄2” 4 4 5.85 12593” 4 41⁄4 7.35 12604” 8 3 12.00 12615” 8 33⁄8 15.15 46646”* 8 33⁄4 16.55 3549* Black Steel

Thread Companion FlangeMalleable Iron

SIZE MEASUREMENT WT/LB PART# BOLT HOLES B (IN)2” 4 33⁄8 4.25 163921⁄2” 4 4 7.70 16403” 4 41⁄4 8.80 16413”* 4 41⁄4 8.75 67744” x 3”** 8 41⁄4 15.19 16504” 8 3 12.70 16425” 8 33⁄8 14.00 16446” 8 33⁄4 16.40 1645* Flat Faced**Reducing

SIZE WT/LB PART#1⁄2” 0.14 12663⁄4” 0.18 12671” 0.20 126811⁄4” 0.25 126911⁄2” 0.45 12702” 0.47 127121⁄2” 1.13 12723” 1.10 12734” 1.83 1274

Weld Flange FittingSCH 40 Black Steel

Thread Phx FlangeMalleable Iron

B

A

B B

A

A

B

B

B

B



TEES, CROSSES, REDUCERS, CAPS & PLUGS


TEES

CROSSES

SIZE MEASUREMENT WT/LB PART# A (IN) B (IN)21⁄2” 5 71⁄2 5.15 07153” 57⁄8 87/16 7.00 07164” 7 10 10.50 0717

SIZE MEASUREMENT WT/LB PART# A (IN) B (IN)2” 35⁄8 5 2.38 166521⁄2” 43⁄8 6 4.19 16663” 51⁄4 63⁄4 6.08 16674” 63⁄8 81⁄4 10.13 1668

SIZE MEASUREMENT WT/LB PART# A (IN) B (IN)1⁄2” 15⁄8 21⁄4 0.52 686011⁄2” 31⁄4 33⁄4 1.68 13192” 41⁄4 43⁄8 2.49 668921⁄2” 41⁄2 51⁄4 5.02 13213” 51⁄4 6 1⁄4 6.82 13224” 61⁄2 73⁄8 11.69 1323

Groove TeeCast Iron

Weld TeeSCH 40 Black Steel

Thread TeeMalleable Iron

A

B

A

B

A

B

A

B

SIZE MEASUREMENT WT/LB PART# A (IN) B (IN)3” 87/16 87/16 9.71 1738

Groove CrossCast Iron

A

B

SIZE HEIGHT (A) WT/LB PART#3” x 2” 3” 1.81 16563” x 21⁄2” 3” 2.03 16574” x 3” 4” 3.24 16585” x 3” 5” 5.62 16595” x 4” 5” 5.60 6227

SIZE WT/LB PART#1” x 3⁄4” 0.18 26481 1⁄4” x 1” 0.29 2462Continued to the right.

SIZE WT/LB PART#11⁄2” x 3⁄4” 0.61 501911⁄2” x 1” 0.49 27662” x 11⁄2” 0.70 173321⁄2” x 11⁄2” 1.36 296521⁄2” x 2” 0.84 12083” x 2” 1.77 12103” x 21⁄2” 1.52 12114” x 3” 3.19 3329

Weld Bell ReducerSCH 40 Black Steel

Thread BushingMalleable Iron

REDUCERS

A

SIZE HEIGHT (A) WT/LB PART#3” x 21⁄2” 21⁄2” 1.51 07134” x 3” 3.20 70415” x 4” 31⁄2” 4.20 0714

Groove by GrooveCast Iron

SIZE HEIGHT (A) WT/LB PART#3” x 2” 21⁄2” 1.21 07073” x 21⁄2” 21⁄2” 1.30 2419

SIZE HEIGHT (A) WT/LB PART#11⁄2” x 1” 21⁄4” 0.80 485021⁄2” x 11⁄2” 31⁄2” 2.00 475921⁄2” x 2” 31⁄2” 2.20 39783” x 2” 31⁄2” 2.80 45283” x 21⁄2” 33⁄4” 3.20 12424” x 3” 41⁄2” 5.40 5357

Thread Bell ReducerMalleable Iron

SIZE WT/LB PART#2” 0.5 480421⁄2” 1.0 06823” 1.25 06834” 2.5 4783

DESCRIPTION WT/LB PART#A. 3” Grooved Cap 1.25 1359B. 3” with 3⁄4” Outlet 1.30 6612B. 3” with 11⁄2” Outlet 0.93 7337

SIZE WT/LB PART#11⁄2” 0.58 12202” 0.80 172821⁄2” 1.60 12213” 2.20 1222

SIZE WT/LB PART#11⁄2” 0.50 13092” 0.77 347121⁄2” 1.19 55533” 1.73 1310

Groove CapCast Iron

UTE Groove Cap (A) UTE Bibb Cap (B)SCH 40 Black Steel

Thread CapMalleable Iron

Thread PlugMalleable Iron

A

B

CAPS & PLUGS

A

B

A BGroove by ThreadCast Iron

A

A

A

Thread Bushing - Continued



BYPASS, AIR ARTICULATED SPRAY, REAR BAR & FRONT BAR ASSEMBLIES


DESCRIPTION QTY PART#A. AV1100 Valve 1 8030B. 3” Grooved Coupling 2 0687C. 3” Nipple Weld x Groove 1 1486D. Adjustable Regulator 1 1597E. Regulator Bracket 1 2885F. 3” Nipple Grooved x Notched 1 6020(A-F) Complete Assembly 7479

DESCRIPTION QTY PART#A. MP2200 Side Spray Nozzle 1 7790B. 3” Aluminum Swivel 1 1030C. “U” Clamp 4.5” 1 0615D. “U” Clamp 4” 1 0614E. Air Cylinder 2” X 6” 1 1500F. Clevis 5⁄8” X 5⁄8” 1 0181G. Cylinder Bracket 1 1347H. 2-Way Air Valve *page 32 1 1492I. AV1100 Valve 1 8030J. Cylinder Mount 1 3804K. Adjustable Regulator 1 1597L. Regulator Bracket 1 2885M. 3” Nipple Thread x Grooved 2 1299N. 3” Rigid Mount Coupling 2 0697(A-N) Complete Assembly 5124

DESCRIPTION QTY PART#A. Rear Bar 3” X 63⁄4 1 3318B. Air Line 25’ Roll 2 4255C. AV1100 Valve 2 8030D. Rear Bar Brackets 2 2005E. BC2399 Adj. Spray Nozzle 2 3484F. 3” Rigid Mount Coupling 2 0697G. 3” Groove Coupling 2 0687H. 1⁄8” Quick Exhaust Valve 2 4520I. 90° Elbow Air Line Fitting 2 5547J. Valve Drain 2 7626K. 1-Way Air Valve w/Nameplate 2 1493(A-K) Complete Assembly 7627

DESCRIPTION QTY PART#A. Front Bar 3” X 52” 1 3363B. Air Line 25’ roll 2 4255C. AV1100 Valve 2 8030D. Front Bar Brackets 2 2137E. BC2384 Fan Spray Nozzle 2 1048F. 3” Rigid Mount Coupling 2 0697G. 3” Groove Coupling 2 0687H. 1⁄8” Quick Exhaust Valve 2 4520I. 90° Elbow Air Line Fitting 2 5547J. Valve Drain 2 7626K. 1-Way Air Valve w/Nameplate 2 1493(A-K) Complete Assembly 7628

STREET FLUSHERS - CHANGE EE. BC2178 Flusher Spray Nozzle 2 1043(A-K) Complete Assembly 7629

LOWERED FLUSHERS - ADD TO ABOVEG. 3” Rigid Mount Coupling 2 0697L. 3” 90° Groove Elbow 2 0677(A-L) Complete Assembly 7630

BYPASS ASSEMBLY

FRONT BAR ASSEMBLY

REAR BAR ASSEMBLY

AIR ARTICULATED ASSEMBLY(Note: Not Pre-Assembled)

Note: See picture on page 54.

Note: See picture on page 54.

A

F

CB

DE

G

E

F

J

A

NDCM

IB

A

B

C

K

JI

H

G

F

D

A

B

CD

L

K

H

I

J

G

FE

QR VALVE ASSEMBLY PART#A. 1⁄8” Quick Exhaust Valve 4520B. 90° Elbow Air Line Fitting 5547C. 1⁄8” Brass Nipple 7643 25’ Air Line Roll 4255

ABC



HOSE REEL, SUCTION FILL & ELKHART CANNON ASSEMBLIES


DESCRIPTION QTY PART#A. 2” Preform Clamp 2 0610 B. 11⁄2” Groove Coupling 1 0684 C. 11⁄2” Grooved Hose Barb 1 2612 D. 11⁄2” Rubber Water Hose 4FT 0738 E. 11⁄2” Thread Hose Barb 1 1302 F. 11⁄2” Street 90 1 1314 G. 1⁄4” Brackets for Cox Reels 2 3609G. 1⁄4” Brackets for American Reels 2 8289H. 11⁄2” Nipple Thread x Groove 1 2128 I. 11⁄2” Nipple Thread x Weld 1 3319 J. 11⁄2” Gate Valve 1 1546 K. 11⁄2” Adjustable Fog Nozzle 1 1068 L. Rubber Hose Reel Hose 1 Varies M. Hose Reel 1 Varies

COX REEL ASSEMBLIES(A-M) 1” x 50’ Manual 6543(A-M) 1” x 100’ Manual 6545(A-M) 11⁄2” x 50’ Manual 3867(A-M) 11⁄2” x 100’ Manual 4967(A-M) 11⁄2” x 50’ Electric 12V* 6092(A-M) 11⁄2” x 100’ Electric 12V* 6093

*ELECTRIC HOSE REEL ASSEMBLIES ADD: N. Circuit Breaker 1 3880O. Solenoid 1 3881P. Push Button Switch 1 3882

AMERICAN REEL ASSEMBLIES(A-M) 11⁄2” x 50’ Manual 9387 Call for more sizes and options

DESCRIPTION QTY PART#A. 3” x 20’ PVC hose 1 2032 B. 3” Suction Branch 1 4657 C. 3” Wafer Butterfly Valve 1 2657 D. Support Strap for Branch 1 2165 E. 3” Male Thread x Male Camloc 1 0590 F. 3” Thread Flange 1 1260 G. 3” Suction Foot Valve 1 1535 H. 3” 90° Elbow 1 0677 I. 3” Groove Butterfly Valve 1 3598 J. 4” Groove Butterfly Valve 1 3606 K. 3” Groove Coupling 3 0687 L. 4” Groove Coupling 1 0689 M. 3” Nipple Groove x Weld 1 1486 N. 3” Nipple Groove x Notch 1 6020 (A-N) Complete Assembly 4758

DESCRIPTION QTY PART#A. 3” x 72” Pipe Weld x Groove 1 8313B. 3” x 18” Pipe Groove x Groove 1 7319C. AV1100 Valve 1 8030D. 3” Groove Tee 1 0716 E. 3” x 2” Groove x Thread 1 0707F. 3” x 3” Nipple Weld x Groove 1 4686G. 3” Rigid Mount Coupling 1 0967H. 3” Groove Coupling 3 0687I. 1⁄8” Quick Exhaust Valve 1 4520J. 90° Elbow Airline Fitting 1 5547K. Elkhart Electric Monitor 1 Varies(A-K) Complete Assembly 12V Toggle 6479(A-K) Complete Assembly 12V Joy Stick 7092(A-K) Complete Assembly 24V Toggle 7274(A-K) Complete Assembly 24V Joy Stick 7826

HOSE REEL ASSEMBLY

SUCTION FILL ASSEMBLY

ELKHART MONITOR ASSEMBLY

Toggle Box or Joystick Control*Joystick takes place of toggle box for Part# (7092 & 7826)

American Crank Reel • 11⁄2” x 50’

COX Crank Reel • 11⁄2” x 50’

A

B

C

D

E

F

G

HI

J

K

L L

M

M

N

O P

A

B

C

DE

F

G

H

I J

K L

N M

A

BC

D

EF

G H

I

J

K



HYDRAULICS


Waterman 12-Volt Hydraulic Control ValveDESCRIPTION WT/LB PART#3000 PSI Normally Open 3.75 0767

Bi-Directional Series Hydraulic MotorDESCRIPTION WT/LB PART#11⁄2” Gear 35 7959

Bi-Directional Series Hydraulic PumpDESCRIPTION WT/LB PART#2” Gear 42 804313⁄4” Gear 42 8042

Hydraulic Relief ValveDESCRIPTION WT/LB PART#Valve (RL-10) 2.25 1015

Hydraulic Filter AssemblyDESCRIPTION WT/LB PART#10 Micron 4.00 2248Filter (alone) 2.25 0815Filter Assembly 4 2248

Manual Hydraulic Flow Control ValveDESCRIPTION WT/LB PART#3⁄4” O-Ring 8.25 7358

Berkeley Hydraulic Pump Adapter Bracket & CouplingDESCRIPTION WT/LB PART#Adapter Kit (set) 15 0916Coupler (alone) 1.75 0946

UTE Hydraulic Oil Tank Reservoir Deck MountDESCRIPTION WT/LB PART#A. 20 Gallon 70 4238B. Cap/Strainer 0.75 2802C. 1⁄2” Gate Valve 2 1546D. Sight Gauge 0.1 1195E. Filter Assembly 4 2248(A-E) UTE Hydraulic Oil 20 Gallon Tank Assy 78 6551

Franklin FMIH-40 Hydraulic AdapterDESCRIPTION WT/LB PART#Hydraulic Adapter FMIH-40 18 9383Coupler FMIH-40 2 8433

Franklin 439M & SAEB Hydraulic AdapterDESCRIPTION WT/LB PART#Hydraulic Coupler for 439M seriesSAEB 16.5 7151

AB

C

D

E

20”

12”

20”



PTO & HYDRAULIC DRIVE SCHEMATICS


DESCRIPTION A. Bi-directional Hydraulic PumpB. 11⁄4” Gate ValveC. 20-50 Gallon Oil TankD. Hycon FilterE. 3⁄4” High Pressure Hose FC410 2250 PSI Max Operating PressureF. Pitts Clutch (optional)G. Relief ValveH. Berkeley Hydraulic AdapterI. Bi-directional Hydraulic MotorJ. Berkeley or FMIH-40 Water PumpK. 3⁄4” Return Line 750 PSI Max Operating PressureL. Suction Line 11⁄4” 350 PSI Max Operating PressureM. Drive Shaft 1310N. Waterman Valve 12V (optional)

Engine/Hydraulic Drive Water Pump System

DESCRIPTION A. Bi-directional Hydraulic PumpB. 11⁄4” Gate ValveC. 20-50 Gallon Oil TankD. Hycon FilterE. 3⁄4” High Pressure Hose FC410 2250 PSI Max Operating PressureF. “K” Mount PTOG. Relief ValveH. Berkeley Hydraulic AdapterI. Bi-directional Hydraulic MotorJ. Berkeley or FMIH-40 Water PumpK. 3⁄4” Return Line 750 PSI Max Operating PressureL. Suction Line 11⁄4” 350 PSI Max Operating Pressure

PTO/Hydraulic Drive Water Pump System

Heavy Duty 2 Gear Chelsea PTO*Call with your transmission model.

A

Yokes & U-Joints for 1310 Series DrivelineEnd YokesDIMENSIONS WT/LB PART#11⁄8” x 1⁄4” Key (Berkeley/FMIH-40) 1.45 370411⁄4” x 5/16” Key (PTO) 1.7 088511⁄2” x 3⁄8” Key (XS-439) 1.8 7169

U-JointU-Joint for 1310 Series 1.12 0902

End Yokes

U-Joint

A

BC

D

E

F

G

H

I

J

K

L

M

N

AB

C

D

E

F

G

H

I

J

K

L



OPTIONS FOR PRE-ASSEMBLED KITSSide Spray: Two independently air operated spray heads front of tank.Front Spray: Two independently air operated spray heads front of truck.Hose Reel: Manual rewind hose reel with adjustable fog nozzle.Engine Drive: Diesel engine drive (pictured to right)

PRE-ASSEMBLED PLUMBING KITS


Water Pump: Berkeley B4ZRKS or FMIH-40 4X4 self-prime 600GPM @ 50PSI, the pump is deck mounted.Hydraulics: Bi-directional hydraulics, with motor attached to water pump. Hydraulic tank, filter assembly, and relief valve are pre-plumbed. Hydraulic pump is shipped loose.Spray Heads: Two rear AV1100 independently air valves with BC2399 adjustable spray nozzles.Suction Fill: Self load plumbing with suction hose and strainer. Console: Cab control console.

Water Pump: Berkeley B3ZRMS or Franklin Electric 4X3 centrifugal 750GPM @75PSI, the pump is deck mounted.Hydraulics: Bi-directional hydraulics, with motor attached to water pump. Hydraulic tank, filter assembly and relief valve are pre-plumbed. Hydraulic pump is shipped loose.Spray Heads: Two rear AV1100 independently air valves with BC2399 adjustable spray nozzles.Console: Cab control console.

Diesel engine drive plumbing kit.

PRE-ASSEMBLED B3ZRMS HYDRAULIC DRIVE PLUMBING KIT

PRE-ASSEMBLED B4ZRKS SELF-PRIMEHYDRAULIC DRIVE PLUMBING KIT



UTE STANDARD PLUMBING KITS & DIAGRAM


PLUMBING KITS INCLUDE:WATER PUMP: Berkeley or Franklin 4X3 centrifugal cast iron pump 750GPM @ 75PSI with ceramic mechanical seal.PLUMBING: From tank to water pump and from pump to each spray head. All plumbing provided is schedule 40 steel pipe with groove style flexible fittings.SPRAY SYSTEM: Cab control console for independently air-operated spray heads,spray heads and nozzles with all the necessary fittings and hardware. 6 Valve Plumbing Kit (2 Rear, 2 Side, 2 Front) 5 Valve Plumbing Kit (2 Rear, 1 Side, 2 Front) 4 Valve Plumbing Kit (2 Rear, 2 Front) 4 Valve Plumbing Kit (2 Rear, 2 Side) 3 Valve Plumbing Kit (2 Rear, 1 Side)

VALVE OPTIONS: (see page 29-31)AV1100 Air Valves (standard): Air to Close, Interchangeable Nozzle Options BC2410 Spray Head Valve (SHV): Air to Open, Built-in Adjustable NozzleElectric Valves: 12V or 24V Spray Head Valve, Built-in Adjustable NozzleInline Air Valves: AV323G, AV5293, Dorot-Netafim, Cla-Val

NOZZLE OPTIONS: (see page 28)BC2178 Street Flusher Nozzle BC2179 Side Spray NozzleBC2399 Adjustable Spray NozzleBC2384 Fan Spray Nozzle

OPTIONS: Hose Reel - Manual or Electric rewind • Suction Fill Plumbing with Hose and Strainer

Elkhart Water Cannon - Manual or Electric

STANDARD PLUMBING DIAGRAM

AV1100 AIR VALVE

BC2399 ADJ. SPRAY NOZ

BC2179 SIDE SPRAY NOZ



UTE STANDARD PUMP PLUMBING & TANK MOUNTING DIAGRAMS


1) 2) 3) 4)5)

1)2)

3) 4) 5)

STANDARD FRAME MOUNTED 4X3 PUMP PLUMBING

1. BERKELEY B3ZRMS 4X3 WATER PUMP2. WATER PUMP MOUNTING BRACKET3. 3” MANIFOLD MOUNTED ACROSS FRAME RAILS4. STUB FOR SUCTION PLUMBING5. 4” INTAKE PIPE TO PUMP

1. BERKELEY B3ZRMS 4X3 WATER PUMP2. WATER PUMP MOUNTING BRACKET3. 3” MANIFOLD MOUNTED ACROSS FRAME RAILS4. 3” VICTAULIC BUTTERFLY VALVE5. 3” CAMLOC “F” FOR SUCTION HOSE HOOK UP6. 3” BUTTERFLY VALVE7. 4” VICTAULIC BUTTERFLY VALVE (PUMP INTAKE SHUT OFF)8. 4” INTAKE PIPE TO PUMP

STANDARD FRAME MOUNTED 4X3 PUMP PLUMBING WITH SUCTION

TANK MOUNTINGWITH 1/4” X 3” FLAT BAR

TANK MOUNTINGWITH RUBBER SKIRTBOARD



UTE STANDARD PLUMBING PHOTOS


Pump mount to standard transmission. PTO bottom mount, water pump mounted inside frame rail on driver side.

Top view of water pump, plumbed to manifold with rear sup-ply pipe attached.

Rigid mount couplers are used to attach valves to the grooved end of the pipe (and a 90º fitting, if used as a side spray). Standard grooved couplings are used to attach nozzle.

Note: The cut out arch in the tank runner for the manifold.Note: Pictured front mount is spring loaded and has the tank guide mount-ed to top tie down. (See mounting instructions page 53).

Front mount is spring loaded. The mid mount and the rear mount are rigid. (See mounting instructions page 53.)

Plumbing from manifold to the front bar is 21⁄2” pipe (kits have elbows for custom installation). Front bar is 3” x 52” grooved on both ends.

Rear spray bar.Note: Rear tank mount - wiring harness - cut out on end plate of tank for the 3” supply pipe.

The 3” rear spray bar tees into the supply line. 3” mani-fold with grooved ends to be installed at a specified mid-ship location.

A B

A

B



UTE SYSTEM DECALS


SIZE PART#6” x 12” 8180

SIZE PART#6” x 12” 7571

SIZE PART#3” x 5” 8498

SIZE PART#31⁄2” x 43⁄8” 8521

SIZE PART#6” x 12” 7179

SIZE PART#6” x 12” 7178



SIZE PART#6” x 12” 8237

SIZE PART#6” x 12” 7177

SIZE PART#31⁄2” x 43⁄8” 8215

SIZE PART#31⁄2” x 3’ 31⁄2” 8521

UTE LOGO DECAL

CAUTION: PTO Bolts

CAUTION: Closing Sprayhead

WARNING: PTO Engagement

SUCTION FILL: System

CAUTION: Drain Pump

IMPORTANT: Grease Pump & Shaft

WARNING: Rotating Shafts

SUCTION FILL: R-Kit

CAUTION: Legal Weight

WARNING: Rollover Risk

NON POTABLE WATER

NON POTABLE WATER



UTE TRUCK SPECIFICATION FORM


MAKE TANK SIZE (GAL) MODEL PTO DRIVE HYDRAULIC DRIVEYEAR SPRAY HEADS CONVENTIONAL CABOVER HOSE REEL ENGINE SELF LOADING TRANSMISSION MONITOR FRONT AXLE CAPACITY EPOXY COATING REAR AXLE CAPACITY GRAVITY DROP CAB TO AXLE (SINGLE) HOT SHIFT PTO CAB TO TANDEM POWDER CODE NOTES:

CUSTOMER NAME PHONE FAX ADDRESS CITY STATE ZIPCODE

TRUCK SPECIFICATION FORM

“CAB TO AXLE

“CAB TO CENTER OF TANDEM



UNITEDBUILT SYSTEM OPERATION & MAINTENANCE


FOR COMPLETE INVENTORY AND TO ORDER PARTS GO TOWWW.WATERTRUCKS.COM

OPERATION OF WATER TRUCK SPRAY SYSTEMWITH HOT SHIFT PTO• Engage PTO while truck is at NO MORE than 1000 RPM to avoid damage. Disengage PTO at any RPM.

WITH AIR OR CABLE SHIFT PTO• Engage PTO while truck is standing still. Never try to engage or disengage PTO while truck is moving. Transmission or PTO failure will result.

DO NOT close all spray head(s) under full pressure. Pump or spray head damage may occur. To close valves safely let engine wind down with clutch disengaged, then close spray heads.DO NOT operate water pump with empty water tank. Water lubricates the pump seals, therefore, lack of water will result in seal failure.The PTO on your truck is matched to your pumping system. The engine on a diesel powered unit should not exceed 2200 RPM while pumping. Gasoline powered units should not exceed 3000 RPM while pumping. Over-speeding the pump can cause premature drive line and pump failure.

DITCH FILL OPERATIONSELF-PRIMING PUMPS:1. Pump volute must be filled with water.2. Connect fill hose to cam-loc fitting on pump suction plumbing and lower strainer into water source.3. Close 4” valve between tank and pump suction. Open the valve between pump and fill hose. Open valve between pump discharge and tank.4. Engage pump drive and set engine speed at 2000 rpm.5. When tank is filled, turn off pump drive. Reverse position of the three valves so system is ready for spraying.

NON-SELF-PRIMING PUMPS:1. There must be enough water in the tank to flood the pump volute and the fill hose. Check the foot valve on the fill hose to assure it closes. If the foot valve doesn’t hold water, repair or replace it before proceeding.2. Connect fill hose to camloc fitting on pump suction plumbing and lower foot valve into water source.3. Close the valve between tank and pump suction. Open the valve between pump and fill hose. Open the valve between pump discharge and tank.4. Engage pump drive and set engine speed at 2000 rpm. If at this point the pump isn’t moving water, do the following: Leave the pump turning. Simultaneously, close the hose valve and open the tank to pump valve. This creates a flow of water through the pump. Then, reverse these valves at the same time. The momentum of the flow through the pump should start filling the tank.5. When filling is complete and pump drive is shut down, reverse valve positions before disconnecting the suction hose at the camloc.If you encounter problems with filling, check for: • Valve Positioning • Suction Hose is Watertight and Airtight (including camloc) • Obstructions Behind the Pump • Foot Valve/Strainer blocked by Mud or Sand • Broken Pump Shaft

• Rocks or pieces of rust periodically make their way through the water loading system (top or ditch fill). Check inside the tank weekly for foreign objects and remove them. Pea sized rocks can damage the pump and spray system.

• Winterize Your System: Always drain pump and plumbing before a freeze. Freezing water will split the pump and plumbing.• Grease pump and PTO drive shaft bi-weekly with good multipurpose chassis grease.

CAUTION: To avoid damaging the water pump, plumbing and sprayheads with sand, silt or small gravel; always use a strain-er or foot valve.



UNITEDBUILT SYSTEM NOTES PAGE


PUMP MODEL: PUMP ROTATION:

VALVE MODELS:

FRONT SPRAYHEADS:

PUMP SEAL:

REAR SPRAYHEADS:MIDSHIP SPRAYHEADS:

TANK MODEL: TANK SERIAL#: TRUCK VIN#:TANK GAL:



2045 West Buckeye Road

Phoenix, Arizona 85009

(800) 600-TANK • Ph: (602) 253-7739

Fax: (602) 258-6312

www.watertrucks.com


where the dust settles… - united truck & equipment ... · photography & design: ...

Documents