when welding small titanium alloy components
DESCRIPTION
This is a good way for when welding small titanium alloy components for aerospace, nuclear plant, and other industries.TRANSCRIPT
When Welding Small Titanium [email protected]
Manufacturers who have to weld small titanium components such as parts for
the aerospace industry or valves for the nuclear industry. for example, can
carry out the welding to a high degree of quality when batches are placed into
Flexible Enclosures and welded at very low oxygen levels.
Flexible enclosures are available in circular format up to 72” diameter and in
rectilinear format up to 6’ long.
Some typical ones are shown here
Once the batch has been loaded, excess air can be ejected by collapsing the
enclosure over the work area and then purging started.
Low cost weld purge monitors are now available as well to go with the very
attractively priced enclosures to create and accurately measure a weld purge
down 1 part per million (1 ppm).
One type of such monitors is shown here:
Those manufacturers with large quantities to be welded can easily afford to
have two of the enclosures working in tandem and use the exhausting purge
gas from the first enclosure, to begin the purge in the second while welding in
the first one is being completed.
Such enclosures have been in successful use by the aerospace industries
and others welding stainless steels, nickel alloys and titanium for more than
three decades.
Baoji Mingkun Nonferrous Metal Co.,Ltd
Tel: +86 917 3253429
Fax: +86 917 3905677
http://www.bjmkgs.com
Contacat: Sally Yuan