wheel loaders integrated tool carriers - … loaders integrated tool carriers part b. 23-228 edition...

© 2014 Caterpillar. All Rights Reserved. CAT, CATERPILLAR, BUILT FOR IT, their respective logos, “Caterpillar Yellow,” the “Power Edge” trade dress as well as corporate and product identity used herein, are trademarks of Caterpillar and may not be used without permission.

800.437.4228www.hawthornecat.com

Caterpillar® Performance

Handbook Edition 44

WHEEL LOADERS

INTEGRATED TOOL CARRIERS

PART B

23-228 Edition 44

Wheel LoadersIntegrated Toolcarriers

Machine/Attachment Selection

MACHINE/ATTACHMENT SELECTIONThe Integrated Toolcarrier’s versatility and the wide

range of attachments makes the “single machine fleet” concept highly attractive to an increasing number of users.

A Job Analysis helps identify applications, work require ments, material handling parameters and the cur rent working method. Thoroughly research each ele ment in the following chart, the gathered infor ma-tion will help select the proper Integrated Tool carrier System.

Work Processes:The first step in the job analysis is to identify all work

processes from start to finish. Key questions outlined below will begin to indicate the required attachments and potential Integrated Toolcarrier applications.

● What kinds of work are performed: (e.g., dozing, loading, stacking, digging, sweeping, handling special materials, etc.)

... in site preparation?

... below ground level?

... at ground level?

... above ground level?

... in landscaping?

... in maintenance equipment yard?etc.

● What work is done manually that could be done with an Integrated Toolcarrier?

● What are the work conditions?: ... underfoot?

... grades?

... tight quarters?

... time restraints?

... climate?etc.

Materials Handled:Examining the materials handled will assist in deter-

mining necessary attachments. Sizes and weights of mate rial(s) handled will indicate the appropriate Inte-grated Toolcarrier model by defining lift and reach require ments. Concentrate on the material flow at the job site — the point of origin as well as the final desti-na tion for the various materials will undoubtedly have material handling requirements.● What kinds of materials are handled (e.g. snow, earth,

bricks, chemicals, pipe, logs, etc.)● What form are the materials handled in: bulk?

palletized?● How much does each weigh?● What are the dimensions of each?● What are the... movement

parameters: ... dozed what distance?... load and carried what

distance?... lifted how high?... placed below ground

level?... placed what distance

from machine?

JOB ANALYSIS METHOD

● APPROPRIATE INTEGRATED TOOLCARRIER MODEL SIZE

● NECESSARY ATTACHMENTS

UTILIZATION & SEQUENCE?

CURRENT EQUIPMENT?

MATERIALS HANDLED?

PRINCIPAL WORK

WORK PROCESSES?

PHB-Sec23(pg175-290).indd 228PHB-Sec23(pg175-290).indd 228 12/20/13 9:07 AM12/20/13 9:07 AM

23

Edition 44 23-229

Machine/Attachment Selection Wheel LoadersIntegrated Toolcarriers

Current Equipment:If determining material weight is not possible, much

information can be determined from looking at the current equipment fleet. This will suggest required per-for mance capabilities such as lifting capacity.● Machines currently doing the work (e.g. wheel load-

ers, lift trucks, sweepers, light capacity cranes, snow plows, etc.)?

● What special (maximum) capabilities does each machine have (production, lift height, load capacity, width/height dimensions, reach, turning radius, travel speed, etc.)?

● To what extent are each machine’s maximum capa-bilities used?

● What are owning/operating costs of each?

Utilization & Sequence:Utilization implies how often the current machines

are used and what will be the utilization factors for the Integrated Toolcarrier with each individual attach ment. Sequence implies what order these tasks are accom plished in and if two or more machines operate at the same time. This portion of the job analysis should assist in com-par ing economies of various systems. Other important con sid erations may be the number of operators needed, storage space, reduced maintenance requirements, etc.● How often (what percent) is each machine used?● How often and when does it sit idle?● How often and when do two or more machines work

at the same time?● Can the operation be changed to permit single machine

operation?

Principal Work:Utilization and sequence will indicate the principal

work the Integrated Toolcarrier will do, further assist-ing in attachment and model sizing and selection. The basic machine/tool package should be able to handle the toughest, most frequently performed jobs for the primary application. Secondary tools can have a little more “give and take” in their performance capabilities than the primary tool.● What work can be accomplished by an Integrated

Toolcarrier?● What work will take up the majority of Integrated

Tool carrier time?● What work will use the maximum static tipping capa-

bilities of the Integrated Toolcarrier?● What high cost (owning and operating) and/or low

utilization machines can be replaced by an Inte grated Toolcarrier?

Additional Tips for Tool Sizing and SelectionTool selection will principally concern hydraulic power

requirements and static tipping load considerations. The standard tools offered by Caterpillar can be used on any Integrated Toolcarrier machine with little difficulty. However, tools such as the hydraulic broom, claws, blades and asphalt cutter will require additional consideration before proposing a system to the customer.

Fork Rating

Table indicates rated pallet fork load at standard ma chine configuration, 600 mm (24") load center, 1200 mm (3'11") fork on IT14G2-930H, see operator man-ual to determine rated load for vehicle configuration being used.Model kg lb Model kg lbIT14G2 1870 4123 930K High Lift 2476 5459924K Standard 2864 6313 938K Standard 3765 8297924K High Lift 2284 5035 938K High Lift 2941 6483930K Standard 3251 7165


23-230 Edition 44



Bucket Rating

Bucket capacity, SAE J742 FEB85 (nominally heaped)Table indicates rated load at vehicle configuration

noted by the asterisks. See operator manual to deter-mine rated load for vehicle configuration being used.

1.4 m3 (1.75 yd3) with Bolt-on Cutting EdgeIT14G2* 2273 kg 5000 lb

1.3 m3 (1.7 yd3) with Bolt-on Cutting Edge910K 2145 kg 4730 lb

1.5 m3 (2.0 yd3) with Bolt-on Cutting Edge914K 2390 kg 5269 lb

1.9 m3 (2.5 yd3) with Bolt-on Cutting Edge924K*** Standard 3710 kg 8179 lb924K*** High Lift 2946 kg 6494 lb

2.1 m3 (2.7 yd3) with Bolt-on Cutting Edge924K*** Standard 3671 kg 8093 lb924K*** High Lift 2725 kg 6008 lb

2.1 m3 (2.7 yd3) with Bolt-on Cutting Edge930K**** Standard 4185 kg 9226 lb930K**** High Lift 2959 kg 6523 lb

2.3 m3 (3.0 yd3) with Bolt-on Cutting Edge930K**** Standard 4146 kg 9140 lb930K**** High Lift 2920 kg 6437 lb

2.5 m3 (3.3 yd3) with Bolt-on Cutting Edge938K**** Standard 4764 kg 10,503 lb938K**** High Lift 3451 kg 7608 lb

2.7 m3 (3.5 yd3) with Bolt-on Cutting Edge938K**** Standard 4719 kg 10,404 lb938K**** High Lift 4589 kg 10,117 lb**** Specifications shown are for high-speed version IT14G2 and include

lubri cants, full fuel tank, ROPS cab, 80 kg (176 lb) operator, standard 250 kg (550 lb) counterweight and 17.5-R25 (L-2 equivalent) tires.

**** Specifications shown include lubricants, full fuel tank, limited slip axles, heavy duty rear brakes, optional counterweights, additional guarding, ROPS cab with A/C, 80 kg (176 lb) operator and 20.5-R25 (L-3) tires.

**** Specifications shown include lubricants, full fuel tank, standard counter-weights, additional guarding, 80 kg (176 lb) operator, and 20.5 R25 (L-3) XHA2 tires.

**** Specifications shown include lubricants, full fuel tank, heavy counter-weights, additional guarding, 80 kg (176 lb) operator, and 20.5 R25 (L-3) XHA2 tires.

The charts explain each machine’s maximum pay-load. The maximum material density would be deter-mined by dividing the payload by the bucket capacity. If the actual material density exceeds the recommended material density, the process should be repeated to select the properly sized bucket.

A similar procedure would be used with the forks and material handling arm to determine maximum rec om-mended lifting capacity and/or required IT model size.

Pallet ForkThe pallet fork will fulfill many material handling

needs. A modified Class 3 fork carriage provides visi-bility to the tines for precision pallet work. This car-riage with non-standard spacing accepts many Class 3 lift truck attachments.

Pallet fork rated operating loads are based on the following:

SAE J1197 FEB91: 50% of the full turn static tip-ping load or the hydraulic/structural limitations.

CEN 474-3 (European standard): 60% of the full static tipping load on rough terrain or the hydraulic/struc tural limitations. 80% of the full turn static tipping load on firm, level ground or the structural/hydraulic limitation. Other local, regional or international guide-lines may also apply.

If operation is on rough ground these criteria may need modification. In this instance, the size and rating of existing equipment should be considered.

Sizing for pallet work generally consists of answering the following questions.1. What are the average loaded pallet dimensions?2. Lift Capacity — what capacity is required to lift and

move the average pallet load? The maximum pallet load?

3. Lift Height — can the machine reach the top level of the standard pallet stack? What are the maxi mum reach, lift and height requirements?

4. Maneuverability — can the machine work around the current aisle configuration? In the stacking aisles? Main aisles? Intersecting aisles? Are 90° turns required in any aisle for material placement?

5. Length — what tine length is required to fit the com-monly used pallets? (1219 mm [4'0"] tines are standard length for most palletized material.)

6. Any machine height restrictions?7. Any special fork configurations required?

Lift capacity, lift height, aisle configuration and tine length are the most important considerations in recom-mending a pallet handling machine.


23

Edition 44 23-231


Example problem:

The following example applies the job analysis method to a work situation.

Sewer & Water ContractorSets water lines (152 mm-610 mm [6 in-24 in] iron

pipe), sanitary sewer lines (152 mm-457 mm [6 in-18 in] PVC) and storm sewer lines (610 mm-1067 mm [24 in- 42 in] concrete pipe) primarily in urban areas ... often-times across or down existing streets.

MaterialsLoam/Clay: 1600 kg/m3 (2700 lb/yd3) loose densityBedding

(Gravel): 1900 kg/m3 (3200 lb/yd3) loose densityWater Pipe: 610 mm (24 in) push-on joint ductile

iron, 6.1 m (20 ft) sections, 1309 kg (2885 lb) 215 kg/m (144.3 lb/ft) × 6.1 m (20 ft).

Storm Sewer: 1067 mm (42 in), Wall B, concrete pipe, 1.5 m (5 ft) sections, 1556 kg (3430 lb) 1021 kg/m (686 lb/ft × 5 ft).

Manhole Boxes: 1361 kg (3000 lb)WHAT INTEGRATED TOOLCARRIER MODEL SHOULD BE RECOMMENDED?WHICH ATTACHMENTS?

Work ProcessesIntegrated Toolcarrier

Attachment PossibilitiesBundled PVC and

individual concrete/iron pipe-loaded/unloaded (yardsite) and strung along trench

Forks/MaterialHandling Arm

Unload, handle, set manhole boxes

Material Handling Arm

Excess excavated material truck loaded

Bucket

Bedding material handled/placed

Bucket

Trench backfilled Bucket/BladeTrench compaction Compactor WheelRough and finish grading Bucket/BladeStreet cleanup Bucket/BroomPavement removal Rebar Snips/Asphalt

Cutter

Current Equipment UtilizationCat 225. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90%Champ CB607 lift truck,

3175 kg (7000 lb) capacity. . . . . . . . . . . . . 15%Deere 444 with 1.1 m3 (1.5 yd3)

G.P. bucket. . . . . . . . . . . . . . . . . . . . . . . . . 60%Rosco D-50 sweeper. . . . . . . . . . . . . one half hour/dayRammax 1361 kg (3000 lb) self-propelled

trench compactor. . . . . . . . . . . . . . . . . . . . 25%

Machine sizing1350 mm (53 in) Forks

Operating Load at Full Turn*Model kg lbIT14G2 1810 5991924K Standard 2781 6131924K High Lift 2224 4903930K Standard 3158 6962930K High Lift 2414 5322938K Standard 3661 8071938K High Lift 2869 6325

Water pipes:1309 kg (2885 lb)

IT14G2 ... 1 pipe — no problem924K Standard ... 1 pipe — no problem924K High Lift ... 1 pipe — no problem930K ... 1 pipe — no problem930K High Lift ... 1 pipe — no problem938K ... 1 pipe — no problem938K High Lift ... 1 pipe — no problem

Storm sewer pipes:1556 kg (3430 lb)

IT14G2 ... 1 pipe — no problem924K Standard ... 1 pipe — no problem924K High Lift ... 1 pipe — no problem930K ... 1 pipe — no problem930K High Lift ... 1 pipe — no problem938K ... 1 pipe — no problem938K High Lift ... 1 pipe — no problem

* Note that the most conservative operating load (SAE J1197 FEB91) is used here. The rated operating load for some competitive machines with pallet forks will be based upon European standard CEN 474-3, assuming operation on firm and level ground (i.e. using 80% of full turn static tipping load).


Performance Series Buckets

Performance Series Buckets utilize a system-based approach to balance bucket shape against the machine’s linkage, weight, lift and tilt capacities. The result is a bucket optimized for performance and productivity, and intended for use in production applications. Perfor-mance Series Buckets for Wheel Loaders are designed for use in truck loading, stockpiling and load-and-carry applications. Per formance is improved over current buckets in these production applications with materials such as sand, gravel and aggregates.

Loads EasyProven design characteristics improve material flow

into the bucket and improve material retention during transport. In some situations, the number of passes required to fill a truck is reduced. Performance Series Buckets are designed for optimum performance on the machine. Profile changes (over current buckets) improve load-abil ity and make Performance Series Buckets machine-specific.

Fuel EfficientPerformance Series Buckets have a longer floor — easily

digging through the pile. Less time in the pile equals less fuel consumed.

Higher Fill FactorsWhen comparing buckets of the same rated capacity,

Performance Series Buckets have higher fill factors — up to 115%.

Move More Material with the Same Rated CapacityMore material can be moved with a Performance Series

Bucket compared to a same-size rated capacity current bucket. Likewise, a smaller Performance Series Bucket can be utilized to move the same amount of material as a larger rated capacity current bucket.

Carries MoreProductive

Bucket shape and strike plane angle are designed for material retention and consistent load sizes. More mate-rial loads into the bucket and is carried all the way to the truck, hopper or stockpile.

A spill guard diverts overflow away from hinge pins, lift arms, hydraulic cylinders and tilt sensors help ing to protect these areas of the machine.

Bucket SpecificationsPerformance Series Buckets are designed to bring opti-

mum performance to a specific machine. Profile changes over current buckets allow higher fill factors and increased production.

Incompatibility on the 950H and 962HThe recent linkage change on the 950K and 962K has

created some incompatibility issues with the Fusion Per formance Series Buckets. Because the bucket shape has been optimized for the machine linkage, Fusion Per-formance Series Buckets designed for use on the 950K and 962K will experience interference with the linkage on the 950H and 962H. For this reason 950K and 962K Performance Series Buckets should NOT be used on the 950H and 962H machines.

Incompatibility on the 966H/K/MBecause 972H/K/M Performance Series Buckets are

designed specifically for performance on the 972H/K/M — their shape brings some incompatibilities with the 966H/K/M machine. These buckets can be pinned on to the 966H, but will experience interference with machine linkage in the rack back position. For this reason, 972H/K/M Performance Series Buckets should not be used on 966H/K/M machines. This is different than current General Purpose Buckets.

23-232 Edition 44




23

Certain Bucket Sizes Require Additional Counterweight

Compared to a current bucket of the same rated capac-ity, Performance Series Buckets will move more mate-rial. To maintain appropriate machine stability, 980H machines utilizing the two larger Performance Series Buckets must be equipped with the aggregate loader counterweight. This is required for machine stability based on the bucket size/fill factor combination.

Compatible with G and G II machinesPerformance Series Buckets for 988-size machines are

compatible with standard and high lift linkages on G and G II Series machines.

Material Handling Arm (MHA)The rated load for the MHA is 50% of the full turn

static tipping load in each position or hydraulic or struc-tural limitations. Manually extendable telescopic sections enable maximum lifting capacity at the full retracted position, and maximum lift height and reach in the fully extended position.

Operating Load at Full Turn

Model Retracted Mid ExtendedIT14G2 1370 kg 1067 kg 8888 kg

3021 lb 2373 lb 1958 lb924K StandardHook On

1903 kg 1614 kg 1401 kg4148 lb 3518 lb 3055 lb

924K High LiftHook On

1608 kg 1386 kg 1218 kg3545 lb 3056 lb 2685 lb

930K StandardHook On

2158 kg 1830 kg 1589 kg5188 lb 4034 lb 3502 lb


1763 kg 1525 kg 1343 kg3886 lb 3361 lb 2961 lb

938K StandardHook On

2737 kg 2134 kg 1855 kg6032 lb 4702 lb 4088 lb


2091 kg 1808 kg 1593 kg4608 lb 3986 lb 3512 lb

Storm sewer pipes:1556 kg (3430 lb)

IT14G2 ... no924K ... yes in retracted and mid930K ... yes in retracted, mid, and extended938K ... yes in retracted, mid, and extended

Manhole boxes:1361 kg (3000 lb)

IT14G2 ... no924K ... yes in retracted and mid930K ... yes in retracted, mid, and extended938K ... yes in retracted, mid, and extended

BucketsAll general purpose buckets are interchangeable on

924K-938K due to common attachment points on the quick couplers. Bucket selection will depend on the material density in your application. Offering multiple sized buckets allows the user the flexibility to closely match material density and bucket size with machine capa bility. Equipping a machine with too large a bucket will result in unacceptable stability — too small a bucket may provide inadequate tire coverage.

Bucket 1780 kg/m3 (3000 lb/yd3) ... 100% fill factor

Edition 44 23-233



23-234 Edition 44



Model Bucket Payload50% Full Turn Static Tipping

924K* Hook On 1.9 m3 3382 kg 3710 kg2.5 yd3 7456 lb 8179 lb2.1 m3 3738 kg 3671 kg2.7 yd3 8241 lb 8093 lb2.3 m3 4094 kg 3634 kg3.0 yd3 9026 lb 8012 lb

930K* Hook On 2.1 m3 3738 kg 4185 kg2.7 yd3 8241 lb 9226 lb2.3 m3 4094 kg 4146 kg3.0 yd3 9026 lb 9140 lb2.5 m3 4450 kg 4077 kg3.3 yd3 9811 lb 8988 lb

938K* Hook On 2.5 m3 4450 kg 4764 kg3.3 yd3 9811 lb 10,503 lb2.7 m3 4806 kg 4720 kg3.5 yd3 10,595 lb 10,406 lb2.9 m3 5162 kg 4684 kg3.8 yd3 11,380 lb 10,326 lb

NOTE: Metric numbers are a product of conversion.**924K, 930K, and 938K equipped with Michelin 20.5-R25 XHA2 tires.**924H and 930H equipped with Michelin 20.5-R25 XHA tires.

Machine/Attachment Recommendation930K — The greater static tipping load capabilities allow it to do a greater portion of the contractor’s total work processes. With the following attach ments, the 930K could replace part or all of the specialty units, such as the wheel loader, rough terrain lift truck, street sweeper, and/or the trench compactor.2.1 m3 (2.75 yd3), 2.3 m3 (3.0 yd3), or 2.5 m3 (3.25 yd3) General Purpose Bucket1350 mm (53 in) forks (handles all pipes)Material Handling Arm — (handles pipe sizes under 1067 mm (42 in) concrete and manhole boxes ... 225 would have to set 1219 mm (48 in) and larger concrete pipeBroom

Optional Attachments to Consider:24-LH compactor wheelRebar snipsAsphalt cutter


Edition 44 23-235


23

Buckets● Americas North

Model Interface Bucket TypeWidthRange

CapacityRange

WeightRange GET

mm in m3 yd3 kg lb924K Fusion General Purpose

Performance Series 2550 100 1.9-2.5 2.5-3.2 775-963 1705-2119 J250/BOCE

Light Material 2750 108 3.5-5.0 4.5-6.5 1161-1502 2554-3311 J250/BOCEMulti-Purpose 2550 100 2.1 2.7 1288 2834 BOCESide Dump 3105 122 1.9 2.5 1653 3644 BOCE Included

High Dump2550-3060

100-120 3.0-5.0 4.0-6.5 1688-2123 3721-4680 BOCE Included

Grapple 2697 106 2.7-2.9 3.5-3.8 1632-1673 3598-3688 J250/BOCEWaste 3059 120 3.6-3.8 4.7-5.0 1416-1474 3122-3250 BOCE IncludedWoodchip 3330 131 4.9-5.3 6.4-6.9 1717-1775 3785-3913 BOCE IncludedGrading 2700 106 1.9 2.5 1233 2716 BOCE Included

Pin On General Purpose Performance Series 2550 100 1.9-2.2 2.5-3.0 812-1057 1786-2330 J250/BOCE

Light Material 2750 108 3.1-5.0 4.0-6.5 1096-1383 2416-3043 J250/BOCE

High Dump2550-3060

100-120 3.0-5.0 4.0-6.5 1695-2149 3737-4738 BOCE Included

Sand and Gravel 2750 108 2.6-3.2 3.4-4.1 1026-1147 2262-2523Doze 2743 108 5.5 4.2 1506 3321 BOCELoad & Carry 2743 108 6.0 4.6 1528 3369 BOCE

930K Fusion General Purpose Performance Series 2550 100 1.9-2.5 2.5-3.2 775-963 1705-2119 J250/BOCE

Light Material 2750 108 3.5-5.0 4.5-6.5 1161-1502 2554-3311 J250/BOCEMulti-Purpose 2550 100 2.1 2.7 1288 2834 BOCESide Dump 3105 122 1.9 2.5 1653 3644 BOCE Included

High Dump2550-3060

100-120 3.0-5.0 4.0-6.5 1688-2123 3721-4680 BOCE Included

Grapple 2697 106 2.7-2.9 3.5-3.8 1632-1673 3598-3688 J250/BOCEWaste 3059 120 3.6-3.8 4.7-5.0 1416-1474 3122-3250 BOCE IncludedWoodchip 3330 131 4.9-5.3 6.4-6.9 1717-1775 3785-3913 BOCE IncludedGrading 2700 106 1.9 2.5 1233 2716 BOCE Included

Pin On General Purpose Performance Series 2550 100 1.8-2.5 2.5-3.2 812-979 1786-2154 J250/BOCE

Sand and Gravel 2750 108 2.6-3.2 3.4-4.1 1026-1147 2262-2523 J250/BOCELight Material 2750 108 3.1-5.0 4.0-6.5 1096-1383 2416-3043 J250/BOCE

High Dump2550-3060

100-120 3.0-3.5 4.0-6.5 1695-2149 3737-4738 BOCE Included

Doze 2743 108 5.5 4.2 1506 3321 BOCELoad & Carry 2743 108 6.0 4.6 1528 3369 BOCE


23-236 Edition 44



CapacityRange

WeightRange GET


Performance Series

2550-2750

100-108 2.5-2.9 3.2-3.8 961-1042 2118-2292 J250/BOCE

Light Material 2750 108 3.1-5.0 4.0-6.5 1075-1360 2370-2992 J250/BOCEMulti-Purpose 2550 100 2.1 2.7 1288 2834 BOCESide Dump 3105 122 1.9 2.5 1653 3644 BOCE IncludedHigh Dump 3060 120 4.1-5.0 5.4-6.5 2041-2123 4500-4680 BOCE IncludedGrapple 2697 106 2.7-2.9 3.5-3.8 1632-1673 3598-3688 J250/BOCEWaste 3059 120 4.0 5.2 1547 3410 BOCE IncludedWoodchip 3330 131 5.5 7.2 1795 3957 BOCE IncludedGrading 2700 106 1.9 2.5 1233 2716 BOCE Included

Pin On General Purpose Performance Series

2550-2750

100-108 2.4-2.8 3.2-3.8 968-1059 2134-2330 J250/BOCE

Sand and Gravel 2750 108 2.7-3.2 3.5-4.1 1075-1146 2365-2521 J250/BOCELight Material 2750 108 3.5-5.0 4.5-6.5 1178-1378 2596-3038 BOCE IncludedHigh Dump 3060 120 4.1-5.0 5.4-6.5 2065-2147 4553-4733 BOCE IncludedDoze 2927 115 6.0 4.6 1854 4088 BOCELoad & Carry 2927 115 6.75 5.2 1927 4249 BOCE

950K 962K

Fusion General Purpose Performance Series 2894 114 2.7-3.8 3.5-5.0 1367-1633 3014-3600 K80/BOCE

Material Handling Performance Series 2894 114 2.7-3.8 3.5-5.0 1373-1650 3027-3638 K80/BOCE

Rock Performance Series 2969 117 2.7-3.2 3.5-4.25 1992-2070 4711-4893 K90

Multi-Purpose 2943 116 2.9 3.75 2087 4601 BOCE IncludedSide Dump 3220 127 2.9 3.75 2348 5177 BOCE IncludedHigh Dump 2910 115 4.6-6.1 6.0-8.0 2672-2784 5891-6139 BOCE IncludedGrapple 3059 120 4.6 6.0 2824 6226 BOCE IncludedWaste 3059 120 5.2-6.1 6.75-8.0 2115-2285 4663-5038 BOCE IncludedWoodchip 3330 131 9.2-9.9 12.0-13.0 2371-2466 5227-5437 BOCE Included

Pin On General Purpose Performance Series 2894 114 2.7-3.8 3.5-5.0 1472-1778 3245-3920 K80/BOCE



Multi-Purpose 2943 116 2.9 3.75 2099 4628 BOCE IncludedSide Dump 3226 127 2.9 3.75 2455 5413 BOCE IncludedHigh Dump 2910 115 4.6-6.1 6.0-8.0 2697-2812 5947-6201 BOCE IncludedGrapple 3059 120 4.6 6.0 2925 6449 BOCE IncludedWaste 3059 120 5.2-6.1 6.5-8.0 2250-2425 4960-5346 BOCE IncludedWoodchip 3330 131 9.2-9.9 12.0-13.0 2418-2516 5331-5547 BOCE IncludedDoze 3059 121 6.75 5.2 2273 5012 BOCELoad & Carry 3059 121 8.0 6.1 2610 5755 BOCE



Edition 44 23-237


23


CapacityRange

WeightRange GET

mm in m3 yd3 kg lb966K 966M



Coal Performance Series 3447 136 7.1 9.25 2865 6316 BOCE Included

Rock Performance Series 3255 128 3.4 4.5 2084 4595 K90

Multi Purpose 3220 127 3.1 4.0 2785 6140 BOCE IncludedSide Dump 3677 145 3.6 4.75 2832 6243 BOCE IncludedHigh Dump 3059 120 5.4 7.0 2862 6310 BOCE IncludedGrapple 3048 120 3.8 5.0 4380 9656 K90Waste 3323 131 6.5 8.5 2569 5664 BOCE IncludedWoodchip 3943 155 9.9 13.0 2543 5606 BOCE IncludedDoze 3357 132 8.5 6.5 3104 6844 BOCE IncludedLoad & Carry 3357 132 9.75 7.5 3311 7301 BOCE Included




Rock Performance Series 3255 128 3.2-3.4 4.25-4.5 2362 5207 K90

Heavy Duty Rock 3251 128 3.6-4.0 4.75-5.25 2371-2751 5227-6065 J350/K90Multi Purpose 3226 127 3.1 4.0 2721 5999 K90Side Dump 3677 145 3.6 4.75 2858 6301 BOCE IncludedWaste 3357 132 6.5 8.5 2925 6449 BOCE Included

Woodchip3327-3937

131-155 8.0-9.9 10.5-13.0 2474-2543 5455-5542 BOCE Included



23-238 Edition 44



CapacityRange

WeightRange GET

mm in m3 yd3 kg lb972K 972M


Material Handling Performance Series 3201 126 5.2 6.75 2274 5013 K90/BOCE



Multi Purpose 3220 127 3.1 4.0 2785 6140 BOCE IncludedSide Dump 3677 145 3.6 4.75 2832 6243 BOCE IncludedHigh Dump 3059 120 5.4 7.0 2862 6310 BOCE IncludedGrapple 3048 120 3.8 5.0 4380 9656 K90Waste 3323 131 6.5 8.5 2569 5664 BOCE IncludedWoodchip 3943 155 9.9 13.0 2543 5606 BOCE IncludedDoze 3357 132 8.5 6.5 3104 6844 BOCE IncludedLoad & Carry 3357 132 9.75 7.5 3311 7301 BOCE Included





Heavy Duty Rock 3251 128 3.6-4.0 4.75-5.25 2371-2751 5227-6065 J350/K90Multi Purpose 3226 127 3.1 4.0 2721 5999 K90Side Dump 3677 145 3.6 4.75 2858 6301 BOCE IncludedWaste 3357 132 6.5 8.5 2925 6449 BOCE Included

Woodchip3327-3937

131-155 8.0-9.9 10.5-13.0 2474-2543 5455-5542 BOCE Included

Slag 3250 128 3.4 4.5 4145 9138 K100966K 972K

Fusion Multi-Purpose 3220 127 2.9-3.1 3.75-4.0 2892 6375 BOCE IncludedSide Dump 3677 145 3.4-3.6 4.5-4.75 2832 6243 BOCE IncludedHigh Dump 3059 120 5.0-5.4 6.5-7.0 2904 6402 BOCE IncludedGrapple 3048 120 3.2-3.6 4.25-4.75 4380 9656 K90Waste 3357 132 6.2-6.5 8.1-8.5 2569 5664 BOCE IncludedWoodchip 3937 155 9.6-9.9 12.5-13.0 2543 5606 BOCE Included

Pin On Heavy Duty Rock 3251 125 3.4-4.0 4.5-5.25 2425-2949 5346-6501 K90/J350Multi-Purpose 3220 127 2.9-3.1 3.75-4.0 2806 6185 BOCE IncludedSide Dump 3677 145 3.4-3.6 4.5-4.75 2836 6252 BOCE IncludedWaste 3357 132 5.7-6.0 7.5-7.85 2837 6255 BOCE Included

Woodchip3327-3937

131-155 7.6-9.9 10.0-13.0 2474-2514 5455-5542 BOCE Included



Edition 44 23-239


23


CapacityRange

WeightRange GET

mm in m3 yd3 kg lb980K Pin On General Purpose

Performance Series 3405 134 5.4-6.0 7.0-7.85 2674-2853 5895-6290 K90/BOCE

Material Handling Performance Series 3405 134 5.7 7.5 2882 6354 K90/BOCE



Heavy Duty Quarry Rock

3505-3568

138-140 4.4-4.6 5.75-6.0 3306-3686 7288-8125 BOCE Included

Waste 3886 153 9.8 12.75 3908 8615 BOCE IncludedWoodchip 4166 164 11.5 15.0 3887 8570 BOCE IncludedDoze 3882 153 13.0 9.9 4210 9283 BOCE IncludedLoad & Carry 3882 153 14.0 10.7 4438 9786 BOCE IncludedSlag 3394 134 3.8 5.0 5302 11,689 K130

986H Pin On Rock 3772 148.5 5.4-6.1 7-8 3692-3907 8139-8693 K110988K Pin On General Purpose

Performance Series 3855 152 6.9-8.4 9.0-11.0 4539-4994 10,007-11,010 K110

Rock Performance Series 4020 158 6.4-7.7 8.3-10.0 4880-5263 10,759-11,603 K130

Heavy Duty Rock Performance Series 4080 161 6.4 8.3 6360 14,021 K130

Heavy Duty Granite Performance Series 3986 157 6.4 8.3 7433 16,385 K130

Serrated Edge Rock 3968 156 6.4-6.9 8.3-9.0 5455-5634 12,026-12,421 —

Iron Ore 3922 154 4.7 6.2 5771 12,723 K130

Coal4120-4450

162-175 11.5-14.5 15.0-19.0 6023-7000 13,278-15,400 BOCE Included

Slag3900-4032

154-159 5.4-6.4 7.0-8.3 7633-8454 16,828-18,638

J600/Serrated Edge



23-240 Edition 44



CapacityRange

WeightRange GET

mm in m3 yd3 kg lb988H Pin On General Purpose

Performance Series 3960 156 6.9-7.7 9.0-10.0 2063-5384 11,138-11,845 K110/BOCE

General Purpose 3860 152 7.7 10.0 4895 10,773 BOCE IncludedRock Performance

Series 4020 158 6.4-7.7 8.3-10.0 4944-5324 10,877-11,713 K130Rock 3980 157 7.7 10.0 4452 9812 K110Heavy Duty Rock

Performance Series 4080 161 6.4 8.3 6348 13,966 K130

Heavy Duty Granite 3980 157 6.4 8.33 7648 16,826 K130

Slag3866-3970

152-156 5.3-6.4 7.0-8.33 7200-7653 15,840-16,837

K130/J600/ Weld-on edge

Coal4120-4450

162-175 11.5-14.5 15.0-19.0 5910-7000 13,030-15,400 BOCE Included

Coal Seam 3810 150 6.8 8.5 4450 9790 J460/BOCEIron Ore 3940 155 4.4 5.75 5475 12,070 K130Serrated Edge

Rock 3970 156 6.9 9.0 4790 10,540 N/A990H Pin On Rock Performance

Series 4610 182 8.6-10.0 11.25-13.0 7247-7497 15,977-16,528 K130Heavy Duty Rock


Heavy Duty Granite Performance Series 4634 182 8.6 11.25 11 451 25,245 K150

Slag4450-4500

175-177 8.5-9.2 11.2-12.0 9149-9613 20,127-21,149

Weld-on edge included

Coal 4370 172 13.4 17.5 7460 16,410 BOCE IncludedIron Ore 4450 175 7.0 9.2 8525 18,750 K150Serrated Edge

Rock 4610 182 9.5 12.4 8140 17,910 N/AN/A = Not Applicable



Edition 44 23-241


23



CapacityRange

WeightRange GET

mm in m3 yd3 kg lb992K Pin On

Rock4824-4884

190-192 10.7-12.2 14.0-16.0 9382-10 574 20,684-23,262 K150/K170

Heavy Duty Rock 5068 200 10.7 14.0 11 560 25,485 K170High Abrasion

Rock 5068 200 10.7 14.0 11 927 26,295 K150Heavy Duty

Granite 5165 203 10.7 14.0 13 720 30,247 K150Coal 6170 243 19.0 25.0 12 504 27,506 BOCE IncludedIron Ore 4900 193 9.0 11.8 11 172 24,577 K150Serrated Edge

Rock 4824 190 12.3 16.0 10 282 22,620 N/A993K Pin On Rock 5068 200 12.2-14.5 16.0-19.0 12 864-14 209 28,301-31,260 K170

High Abrasion Rock 5160 203 12.2-13.0 16.0-17.0 15 205-15 456 33,451-34,004 K170

Heavy Duty Granite 5160 203 13.0 17.0 17 418 38,320 K170

Coal 6300 248 23.0 31.0 17 673 38,880 K170Iron Ore 5160 203 10.0 13.0 14 063 30,940 K170Serrated Edge

Rock 5080 200 15.0 19.5 13 915 30,615 N/A994H Pin On

Rock5650-6220

222-245 14.9-19.1 19.5-25.0 19 302-21 777 42,465-47,909 J800

Coal6220-6300

245-248 31.3-35.9 41.0-47.0 22 211-23 598 48,864-51,916

J700/Weld-on edge

N/A = Not Applicable


23-242 Edition 44



CapacityRange

WeightRange GET

mm in m3 yd3 kg lb924K Fusion General Purpose 2550 100 1.9 -2.5 2.5-3.2 775-963 1705-2119 J250/BOCE

Light Material 2750 108 3.5-5.0 4.5-6.5 1161-1360 2554-2992 BOCEMulti-Purpose 2550 100 2.1 2.7 1288 2834 J250/BOCEHigh Dump 2550-3060 100-120 3.0-5.0 4.0-6.5 1688-2123 3721-4680 BOCE

Pin On General Purpose 2550 100 1.9 -2.3 2.5-3.0 812-893 1786-1965 J250/BOCESand and Gravel 2750 108 2.6-3.2 3.4-4.1 1026-1147 2262-2523 J250/BOCELight Material 2750 108 3.1-5.0 4.0-6.5 1096-1383 2416-3043 BOCEHigh Dump 2550-3060 100-120 3.0-5.0 4.0-6.6 1096-2149 3737-4738 BOCE

930K Fusion General Purpose 2550 100 1.9 -2.5 2.5-3.2 775-963 1705-2119 J250/BOCELight Material 2750 108 3.5-5.0 4.5-6.5 1161-1360 2554-2992 BOCEMulti-Purpose 2550 100 2.1 2.7 1288 2834 J250/BOCEHigh Dump 2550-3060 100-120 3.0-5.0 4.0-6.5 1688-2123 3721-4680 BOCE

Pin On General Purpose 2550 100 1.9 -2.5 2.5-3.2 812-979 1786-2154 J250/BOCESand and Gravel 2750 108 2.6-3.2 3.4-4.1 1026-1147 2262-2523 J250/BOCELight Material 2750 108 3.1-5.0 4.0-6.5 1096-1383 2416-3043 BOCEHigh Dump 2550-3060 100-120 3.0-3.5 4.0-6.5 1695-2149 3737-4738 BOCE

938K Fusion General Purpose 2550-2750 100-108 2.5 -2.9 3.2-3.8 961-1042 2118-2292 J250/BOCELight Material 2750 108 3.1-5.0 4.0-6.5 1075-1360 2370-2992 BOCEMulti-Purpose 2550 100 2.1 2.7 1288 2834 J250/BOCEHigh Dump 3060 120 4.1-5.0 5.4-6.5 2041-2123 4500-4680 BOCE

Pin On General Purpose 2550-2750 100-108 2.4-2.8 3.2-3.8 968-1059 2134-2330 J250/BOCESand and Gravel 2750 108 2.7-3.2 3.5-4.1 1067-1147 2347-2523 J250/BOCELight Material 2750 108 3.5-5.0 4.5-6.5 1178-1378 2596-3038 BOCEHigh Dump 3060 120 4.1-5.0 5.4-6.5 2065-2147 4553-4733 BOCE

Buckets● Americas South


Edition 44 23-243


23


CapacityRange

WeightRange GET

mm in m3 yd3 kg lb950H962H


Material Handling 2896 114 3.3-3.8 4.25-5.0 1701 3750 K80/BOCECoal 3302 130 5.7-5.9 7.5-7.75 1928 4251 BOCERock 2969 117 2.7-3.25 3.75-4.25 1588-1638 3500-3611 K90Multi-Purpose 2946 116 2.87 3.75 2087 4600 BOCE IncludedSide Dump 3226 127 2.87 3.75 2340 5160 BOCE IncludedHigh Dump 2921 115 4.2-4.6 5.5-6.0 2657 5857 BOCE IncludedGrapple 2921 115 3.0-3.25 4.0-4.25 2139 4715 K80/BOCEWaste 3048 120 5.2 6.75 2163 4769 BOCE IncludedWoodchip 3327 131 9.2 12.0 2121 4676 BOCE Included



Coal Performance Series 3040 120 4.2-5.2 5.2-6.8 TBD BOCE Included


Multi-Purpose 2938 116 2.9 3.75 2015 4440 BOCE IncludedSide Dump 3226 127 2.9 3.75 2406 5300 BOCE IncludedWaste 3058 120 5.2 6.75 2376 5235 BOCE IncludedWoodchip 3327 131 9.2 12.0 2279 5020 BOCE Included

966H Fusion General Purpose Performance Series 3201 126 3.6-4.6 4.75-6.0 1965-2143 4332-4724 K90/BOCE










23-244 Edition 44




CapacityRange

WeightRange GET

mm in m3 yd3 kg lb972H Fusion General Purpose

Performance Series 3201 126 4.0-5.0 5.25-6.5 2026-2212 4467-4877 K90/BOCE

Material Handling Performance Series 3201 126 5.0-5.2 6.5-6.75 2274 5013 K90/BOCE







966H972H

Fusion Multi-Purpose 3220 127 2.9-3.1 3.75-4.0 2892 6375 BOCE IncludedSide Dump 3677 145 3.4-3.6 4.5-4.75 2832 6243 BOCE IncludedHigh Dump 3059 120 5.0-5.4 6.5-7.0 2904 6402 BOCE IncludedGrapple 3048 120 3.2-3.6 4.25-4.75 4380 9656 K90/BOCEWaste 3357 132 6.2-6.5 8.1-8.5 2569 5664 BOCE IncludedWoodchip 3937 155 9.6-9.9 12.5-13.0 2543 5606 BOCE Included

Pin On Heavy Duty Rock 3251 125 3.4-4.0 4.5-5.25 2425-2949 5346-6501 K90/J350Multi-Purpose 3220 127 2.9-3.1 3.75-4.0 2806 6185 BOCE IncludedSide Dump 3677 145 3.4-3.6 4.5-4.75 2836 6252 BOCE IncludedWaste 3357 132 5.7-6.0 7.5-7.85 2837 6255 BOCE IncludedWoodchip 3327-3937 131-155 7.6-9.9 10.0-13.0 2474-2514 5455-5542 BOCE Included

980H Pin On General Purpose Performance Series 3405 134 5.0-6.1 6.5-8.0 2572-2726 5670-6010 K100/BOCE

Material Handling Performance Series 3405 134 5.5-5.7 7.25-7.5 2780 6129 K100/BOCE



Heavy Duty General Purpose 3450 136 5.4-5.7 7.0-7.5 3439 7582 BOCE

Heavy Duty Quarry Rock

3505-3568 138-140 4.0-4.6 5.25-6.0 306-3686 7288-8125 K110

Slag 3394 134 3.8 5.0 5302 11,689 K130Waste 3886 153 9.3-9.8 12.25-12.75 3908 8615 BOCE IncludedWoodchip 4166 164 11.3-11.5 14.75-15.0 3887 8570 BOCE Included


Edition 44 23-245


23



CapacityRange

WeightRange GET

mm in m3 yd3 kg lb986H Pin On Rock 3772 148.5 5.4-6.1 7-8 3692-3907 8139-8693 K110988H Pin On General Purpose

Performance Series 3900 154 6.9-7.7 9.0-10.0 4937-5158 10,861-11,407 K110/BOCE

General Purpose 3860 152 7.7 10.0 4895 10,773 BOCE IncludedRock Performance

Series 4020 158 6.4-7.7 8.3-10.0 4787-6221 10,531-11,341 K130Rock 3980 157 7.7 10.0 4452 9812 K110Heavy Duty Rock


Heavy Duty Granite 3980 157 6.4 8.33 7648 16,826 K130

Slag 3866-3970 152-156 5.3-6.4 7.0-8.33 7200-7653 15,840-16,837K130/J600/

Weld-on EdgeCoal 4120-4450 162-175 11.5-14.5 15.0-19.0 5910-7000 13,030-15,400 BOCE IncludedCoal Seam 3810 150 6.8 8.5 4450 9790 J460/BOCEIron Ore 3940 155 4.4 5.75 5475 12,070 K130Serrated Edge

Rock 3970 156 6.9 9.0 4790 10,540 N/A988K Pin On General Purpose


Rock Performance Series 4020 158 6.4-7.7 8.3-10.0 4880-5263 10,759-11,603 K130


Heavy Duty Granite Performance Series 3986 157 6.4 8.3 7433 16,385 K130

Serrated Edge Rock 3968 156 6.4-6.9 8.3-9.0 5455-5634

12,026-12,421 —

Iron Ore 3922 154 4.7 6.2 5771 12,723 K130

Coal4120-4450 162-175 11.5-14.5 15.0-19.0 6023-7000

13,278-15,400 BOCE Included

Slag3900-4032 154-159 5.4-6.4 7.0-8.3 7633-8454

16,828-18,638

J600/Serrated Edge



23-246 Edition 44




CapacityRange

WeightRange GET

mm in m3 yd3 kg lb990H Pin On Rock



Heavy Duty Granite Performance Series 4634 182 8.60 11.25 12 055 26,520 K150

Slag 4450-4500 175-177 8.5-9.2 11.2-12.0 8882-9450 19,540-20,790Weld-on Edge

IncludedCoal 4370 172 13.4 17.5 8400 16,410 BOCE IncludedIron Ore 4450 175 7.0 9.2 8523 18,480 K150Serrated Edge

Rock 4610 182 9.5 12.5 8155 17,940 N/A992K Pin On Rock 4824-4884 190-192 10.7-12.2 14.0-16.0 9382-10 574 20,684-23,262 K150/K170

Heavy Duty Rock 5068 200 10.7 14.0 11 560 25,485 K170High Abrasion

Rock 5068 200 10.7 14.0 11 927 26,295 K150Heavy Duty

Granite 5165 203 10.7 14.0 13 720 30,247 K150Coal 6170 243 19.0 25.0 12 504 27,506 BOCE IncludedIron Ore 4900 193 9.0 11.8 11 172 24,577 K150Serrated Edge

Rock 4824 190 12.3 16.0 10 282 22,620 N/A993K Pin On Rock 5068 200 12.2-14.5 16.0-19.0 12 864-14 209 28,301-31,260 K170

High Abrasion Rock 5160 203 12.2-13.0 16.0-17.0 15 205-15 456 33,451-34,004 K170

Heavy Duty Granite 2160 203 13.0 17.0 17 418 38,320 K170

Coal 6300 248 23.0 31.0 17 673 38,880 K170Iron Ore 5160 203 10.0 13.0 14 063 30,940 K170Serrated Edge

Rock 5080 200 15.0 19.5 13 915 30,615 N/A994H Pin On Rock 5650-6220 222-245 14.9-19.1 19.5-25.0 19 302-21 777 42,465-47,909 J800

Coal 6220-6300 245-248 31.3-35.9 41.0-47.0 22 211-23 598 48,864-51,916J700/Weld-on

EdgeN/A = Not Applicable


Edition 44 23-247


23

Buckets● Europe, Africa, Middle East


CapacityRange

WeightRange GET

mm in m3 yd3 kg lb924K Fusion General Purpose 2550 100 1.9-2.5 2.5-3.2 775-963 1705-2119 J250/BOCE

Light Material 2750 108 3.5-5.0 4.5-6.5 1161-1360 2554-2992 J250/BOCEMulti-Purpose 2550 100 2.1 2.7 1288 2834 BOCEHigh Dump 2550-3060 100-120 3.0-5.0 4.0-6.5 1688-2123 3721-4680 BOCE

ISO General Purpose 2550 100 2.2-2.3 2.9-3.0 792-828 1746-1825 J250/BOCEGrading 2600-2900 102-114 1.78-2.01 2.3-2.6 847-922 1867-2033 BOCELight Material 2750 108 3.5-5.0 4.5-6.5 2454-2859 5410-6303 J250/BOCEHigh Dump 2550-3060 100-120 3.0-5.0 4.0-6.5 1627-2081 3587-4588 BOCE

Pin On General Purpose 2550 100 1.9-2.2 2.5-3.0 812-893 1786-1965 J250/BOCELight Material 2750 108 3.1-5.0 4.0-6.5 1096-1383 2416-3043 J250/BOCEHigh Dump 2550-3060 100-120 3.0-5.0 4.0-6.5 1695-2149 3737-4738 BOCESand & Gravel 2750 108 2.6-3.2 3.4-4.1 1026-1147 2262-2523 J250/BOCE

930K Fusion General Purpose 2550 100 1.9-2.5 2.5-3.2 775-963 1705-2119 J250/BOCELight Material 2750 108 3.5-5.0 4.5-6.5 1161-1360 2554-2992 J250/BOCEMulti-Purpose 2550 100 2.1 2.7 1288 2834 BOCEHigh Dump 2550-3060 100-120 3.0-5.0 4.0-6.5 1688-2123 3721-4680 BOCE

ISO General Purpose 2550 100 2.2-2.3 2.9-3.0 792-828 1746-1825 J250/BOCEGrading 2600-2900 102-114 1.78-2.01 2.3-2.6 847-922 1867-2033 BOCELight Material 2750 108 3.5-5.0 4.5-6.5 2454-2859 5410-6303 J250/BOCEHigh Dump 2550-3060 100-120 3.0-5.0 4.0-6.5 1627-2081 3587-4588 BOCE

Pin On General Purpose 2550 100 1.8-2.4 2.5-3.2 812-979 1786-2154 J250/BOCELight Material 2750 108 3.1-5.0 4.0-6.5 1096-1383 2416-3043 J250/BOCEHigh Dump 2550-3060 100-120 3.0-3.5 4.0-6.5 1695-2149 3737-4738 BOCESand & Gravel 2750 108 2.6-3.2 3.4-4.1 1026-1147 2262-2523 BOCE

938K Fusion General Purpose 2550-2750 100-108 2.5-2.9 3.2-3.8 961-1042 2118-2292 J250/BOCELight Material 2750 108 3.1-5.0 4.0-6.5 1075-1360 2370-2992 J250/BOCEMulti-Purpose 2550 100 2.1 2.7 1288 2834 BOCEHigh Dump 3060 120 4.1-5.0 5.4-6.5 2041-2123 4500-4680 BOCE

ISO General Purpose 2750 108 2.5-2.7 3.2-3.5 915-959 2017-2114 J250/BOCEGrading 2600-2900 102-114 1.78-2.01 2.3-2.6 847-922 1867-2033 BOCELight Material 2750 108 3.5-5.0 4.5-6.5 2454-2859 5410-6303 J250/BOCEHigh Dump 3060 120 4.1-5.0 5.4-6.5 2001-2081 4409-4588 BOCE

Pin On General Purpose 2550-2750 100-108 2.4-2.8 3.2-3.8 968-1059 2134-2330 J250/BOCELight Material 2750 108 3.5-5.0 4.5-6.5 1178-1378 2596-3038 BOCEHigh Dump 3060 120 4.1-5.0 5.4-6.5 2065-2147 4553-4733 BOCESand & Gravel 2750 108 2.7-3.2 3.5-4.1 1075-1146 2365-2521 J250/BOCE


23-248 Edition 44




CapacityRange

WeightRange GET


Performance Series2894 114 2.9-3.6 3.79-4.7 1449-1550 3195-3417 K80/BOCE

Material Handling Performance Series 2904-2994 114-117 3.1-3.4 4.05-4.45 1535-2070 3384-4564 K80/BOCE




962K Fusion General Purpose Performance Series 2894 114 3.2-3.6 4.18-4.7 1517-1550 3344-3417 K80/BOCE
















Rock Performance Series 3252-3350 128-132 3.4-4.0 4.5-5.25 2209-3039 4860-6686 K90/K100

980K Pin On General Purpose Performance Series 3413 134 5.0-6.0 6.5-7.8 2572-2831 5670-6228 K100/BOCE


Rock Performance Series 3510-3645 138-144 4.5-5.4 5.85-7.02 3058-4335 6728-9537 K100/K110


Edition 44 23-249


23


Model Interface Bucket Type Width Capacity GETmm in m3 yd3

988H Pin On General Purpose 3900 153.5 6.9 9.0 StraightGeneral Purpose 3900 153.5 7.6 9.9 Straight

Rock 4020 158.3 6.4 8.4 SpadeRock 4020 158.3 6.9 9.0 SpadeRock 4013 158.0 7.7 10.1 SpadeRock 3980 156.7 7.6 9.9 Spade

Heavy Duty Rock 4080 160.6 6.4 8.4 Spade Heavy Duty Granite 3988 157.0 6.4 8.4 Spade Iron Ore 3940 155.1 4.4 5.8 Spade Serrated Edge 3800 149.6 6.4 8.4 V-Serrated

Serrated Edge 3968 156.2 6.9 9.0 V-Serrated Coal 4120 162.2 11.5 15.0 Straight

Coal 4118 162.1 13 17.0 Straight Slag 3899 153.5 6.5 8.5 Serrated

Slag 3860 152.0 5.4 7.1 SpadeSlag 3962 156.0 5.3 6.9 StraightSlag 3900 153.5 5.3 6.9 Straight

990H Pin On Rock 4610 181.5 9.2 12.0 SpadeRock 4450 175.2 8.6 11.2 Spade

Heavy Duty Rock 5409 213.0 8.55 11.2 Spade Heavy Duty Granite 4636 182.5 8.6 11.2 Spade Iron Ore 4450 175.2 7.03 9.2 Spade Serrated Edge 4450 175.2 8.6 11.2 V-Edge

Serrated Edge 4610 181.5 9.1 11.9 V-EdgeSerrated Edge 4610 181.5 9.5 12.4 Serrated Spade

Coal 4500 177.2 8.6 11.2 Straight Slag 4450 175.2 9.2 12.0 Serrated Spade

Slag 4500 177.2 8.6 11.2 Serrated Spade 992G Pin On Serrated Edge 4826 190.0 11.5 15.0 V-Serrated

Serrated Edge 4826 190.0 12.3 16.1 V-Serrated 992K Pin On Rock 4824 189.9 10.7 14.0 Spade

Rock 4824 189.9 11.5 15.0 SpadeRock 4824 189.9 12.2 16.0 Spade

Heavy Duty Rock 5080 200.0 10.7 14.0 SpadeHeavy Duty Granite 5156 203.0 10.7 14.0 Spade

Iron Ore 4900 192.9 9 11.8 Spade Serrated Edge 4824 189.9 12.3 16.1 V-Serrated Coal 6170 242.9 18.9 24.7 Straight


23-250 Edition 44



Model Interface Bucket Type Width Capacity GETmm in m3 yd3

993K Pin On Rock 5080 200.0 12.2 16.0 SpadeRock 5080 200.0 13 17.0 SpadeRock 5080 200.0 13.8 18.0 SpadeRock 5080 200.0 14.5 19.0 Spade

High Abrasion 5160 203.1 12.2 16.0 SpadeHigh Abrasion 5160 203.1 13 17.0 Spade

Heavy Duty Granite 5160 203.1 13 17.0 Spade Iron Ore 5160 203.1 10 13.1 Spade Serrated Edge 5080 200.0 14.9 19.5 V-Serrated Coal 6300 248.0 23.7 31.0 Straight994F Pin On Rock 5650 222.4 15 19.6 Spade

Rock 5650 222.4 17 22.2 SpadeRock 5650 222.4 19 24.9 SpadeRock 6220 244.9 18 23.5 SpadeRock 6220 244.9 19 24.9 Spade

Coal 6220 244.9 31.5 41.2 StraightCoal 6300 248.0 36 47.1 V-Serrated


Edition 44 23-251


23


● High Dump Buckets

Model Capacity Width WeightDump Clearance Maximum Material Density

Standard Lift High Lift Standard Lift High Liftm3 yd3 mm in kg lb mm in mm in kg/m3 lb/yd3 kg/m3 lb/yd3

950H 5.1 6.7 3000 118.1 2662 5869 4543 178.9 5147 202.6 873 1471 867 14617.2 9.4 3200 126.0 3444 7593 4625 182.1 5247 206.6 550 927 552 9309.0 11.8 3400 133.9 3847 8481 4496 177.0 5126 201.8 404 681 410 691

950K 5.1 6.7 3000 118.1 2620 5776 4567 179.8 5022 197.7 934 1574 829 13977.2 9.4 3200 126.0 3500 7716 4600 181.1 5100 200.8 550 927 470 7929.0 11.8 3400 133.9 3900 8598 4650 183.1 5150 202.8 410 691 350 590

962H 5.1 6.7 3000 118.1 2662 5869 4543 178.9 5147 202.6 995 1677 715 12057.2 9.4 3200 126.0 3444 7593 4625 182.1 5247 206.6 635 1070 434 7329.0 11.8 3400 133.9 3847 8481 4496 177.0 5126 201.8 472 796 313 528

962K 5.1 6.7 3000 118.1 2620 5776 4567 179.8 5022 197.7 934 1574 829 13977.2 9.4 3200 126.0 3500 7716 4800 189.0 5100 200.8 600 1011 643 10849.0 11.8 3400 133.9 3900 8598 4850 190.9 5150 202.8 450 758 480 809

966H 6.7 8.8 3200 126.0 3598 7932 4909 193.3 5677 223.5 940 1584 975 164311.5 15.0 3600 141.7 5021 11,069 4950 194.9 5500 216.5 444 748 450 758

966K 6.7 8.8 3200 126.0 3598 7932 4909 193.3 5677 223.5 964 1625 988 166511.5 15.0 3600 141.7 5021 11,069 4950 194.9 5500 216.5 429 723 427 720

972H 6.7 8.8 3200 126.0 3598 7932 5003 197.0 5677 223.5 1076 1814 984 165911.5 15.0 3600 141.7 5021 11,069 5170 203.5 5500 216.5 496 836 435 733

972K 6.7 8.8 3200 126.0 3598 7932 4909 193.3 5677 223.5 964 1625 988 166511.5 15.0 3600 141.7 5021 11,069 5170 203.5 5500 216.5 503 848 446 752


23-252 Edition 44


Buckets● Australia/New Zealand


CapacityRange

WeightRange GET

mm in m3 yd3 kg lb924K Fusion General Purpose 2550 100 1.9 -2.5 2.5-3.2 775-963 1705-2119 J250/BOCE

Light Material 2750 108 3.5-5.0 4.5-6.5 1161-1360 2554-2992 BOCEMulti-Purpose 2550 100 2.1 2.7 1288 2834 J250/BOCESide Dump 3105 122 1.9 2.5 1653 3644 BOCEHigh Dump 2550-3060 100-120 3.0-5.0 4.0-6.5 1688-2123 3721-4680 BOCEGrapple 2697 106 2.7-2.9 3.5-3.8 1632-1673 3598-3688 J250/BOCEWaste 3059 120 3.6-4.0 4.7-5.2 1416-1547 3122-3410 BOCEWoodchip 3330 131 4.9-5.5 6.4-7.2 1717-1795 3785-3957 BOCEGrading 2700 106 1.9 2.5 1233 2716 BOCE

ISO General Purpose 2550-2750 100-108 2.1-2.9 2.7-3.8 775-997 1705-2193 J250/BOCEPin On General Purpose 2550 100 1.9-2.2 2.5-3.0 812-893 1786-1965 J250/BOCE

Sand and Gravel 2750 108 2.6-3.2 3.4-4.1 1026-1147 2262-2523 J250/BOCELight Material 2750 108 3.1-5.0 4.0-6.5 1096-1383 2416-3043 BOCEHigh Dump 2550-3060 100-120 3.0-5.0 4.0-6.5 1695-2149 3737-4738 BOCE

930K Fusion General Purpose 2550 100 1.9 -2.5 2.5-3.2 775-963 1705-2119 J250/BOCELight Material 2750 108 3.5-5.0 4.5-6.5 1161-1360 2554-2992 BOCEMulti-Purpose 2550 100 2.1 2.7 1288 2834 J250/BOCESide Dump 3105 122 1.9 2.5 1653 3644 BOCEHigh Dump 2550-3060 100-120 3.0-5.0 4.0-6.5 1688-2123 3721-4680 BOCEGrapple 2697 106 2.7-2.9 3.5-3.8 1632-1673 3598-3688 J250/BOCEWaste 3059 120 3.6-4.0 4.7-5.2 1416-1547 3122-3410 BOCEWoodchip 3330 131 4.9-5.5 6.4-7.2 1717-1795 3785-3957 BOCEGrading 2700 106 1.9 2.5 1233 2716 BOCE

ISO General Purpose 2550-2750 100-108 2.1-2.9 2.7-3.8 775-997 1705-2193 J250/BOCEPin On General Purpose 2550 100 1.8-2.5 2.5-3.2 812-979 1786-2154 J250/BOCE

Sand and Gravel 2750 108 2.6-3.2 3.4-4.1 1026-1147 2262-2523 J250/BOCELight Material 2750 108 3.1-5.0 4.0-6.5 1096-1383 2416-3043 BOCEHigh Dump 2550-3060 100-120 3.0-3.5 4.0-6.5 1695-2149 3737-4738 BOCE

938K Fusion General Purpose 2550-2750 100-108 2.5-2.9 3.2-3.8 961-1042 2118-2292 J250/BOCELight Material 2750 108 3.1-5.0 4.0-6.5 1075-1360 2370-2992 BOCEMulti-Purpose 2550 100 2.1 2.7 1288 2834 J250/BOCESide Dump 3105 122 1.9 2.5 1653 3644 BOCEHigh Dump 3060 120 4.1-5.0 5.4-6.5 2041-2123 4500-4680 BOCEGrapple 2697 106 2.7-2.9 3.5-3.8 1632-1673 3598-3688 J250/BOCEWaste 3059 120 3.6-4.0 4.7-5.2 1416-1547 3122-3410 BOCEWoodchip 3330 131 4.9-5.5 6.4-7.2 1717-1795 3785-3957 BOCEGrading 2700 106 1.9 2.5 1233 2716 BOCE

ISO General Purpose 2550-2750 100-108 2.1-2.9 2.7-3.8 775-997 1705-2193 J250/BOCEPin On General Purpose 2550-2750 100-108 2.4-2.8 3.2-3.8 968-1059 2134-2330 J250/BOCE

Sand and Gravel 2750 108 2.7-3.2 3.5-4.1 1075-1146 2365-2521 J250/BOCELight Material 2750 108 3.5-5.0 4.5-6.5 1178-1378 2596-3038 BOCEHigh Dump 3060 120 4.1-5.0 5.4-6.5 2065-2147 4553-4733 BOCE


Edition 44 23-253


23


Model Interface Bucket Type Width Capacity Weight GETmm in m3 yd3 kg lb

IT62G HPL Material Handling 2921 115 3.1 4.1 1242 2738 K80X8Material Handling 2921 115 3.2 4.2 1259 2776 K80X8Woodchip 3277 129 5.5 7.2 1493 3291 N/A

950H, 950G, 962H, 926G

Pin On General Purpose Performance Series 2894 114 3.1 4.1 1507 3322 K80X8

General Purpose Performance Series 2894 114 3.3 4.3 1550 3417 K80X8

Material Handling Performance Series 2894 114 3.2 4.2 1538 3391 K80X8



General Purpose 2921 115 3.1 4.0 1483 3269 K80X8General Purpose 2921 115 3.4 4.5 1583 3490 K80X8Material Handling 2921 115 3.4 4.5 1424 3139 K80X8Material Handling 2946 116 4.2 5.5 1725 3803 K80X8Material Handling N/A N/A 3.3 4.3 1326 2923 K80X8Rock 2972 117 2.9 3.8 1550 3417 N/ARock 2972 117 2.9 3.8 1618 3567 N/AWoodchip 3327 131 9.2 12.0 2279 5024 N/A

HPL General Purpose 2921 115 3.1 4.1 1479 3261 K80X8General Purpose 2921 115 3.2 4.2 1280 2822 K80X8General Purpose 2921 115 3.4 4.4 1385 3053 K80X8Woodchip 3327 131 9.2 12.0 2349 5179 N/A

Fusion General Purpose 2896 114 3.1 4.1 1322 2915 K80X8General Purpose 2896 114 3.4 4.4 1408 3104 K80X8General Purpose 2896 114 3.8 5.0 1483 3269 K80X8Rock 2969 117 3.1 4.1 1588 3501 K90X8Rock 2969 117 3.3 4.3 1638 3611 K90X8Material Handling 2896 114 3.4 4.4 1370 3020 K80X8Material Handling 2896 114 3.8 5.0 1447 3190 K80X8Coal 3302 130 5.9 7.7 1928 4251 N/AMulti-purpose 2946 116 2.87 3.75 2087 4601 N/ASide Dump 3226 127 2.87 3.75 2340 5159 N/AHigh Dump 2921 115 4.6 6.0 2657 5858 N/AGrapple 2921 115 3.25 4.25 2139 4716 N/AWaste 3048 120 5.2 6.8 2163 4769 N/AWoodchip 3327 131 9.2 12.0 2121 4676 N/A



23-254 Edition 44




966, 972









Rock Performance Series 3255 128 3.4 4.4 2362 5207 K90X8Rock Performance Series 3255 128 4.0 5.2 2397 5284 K90X8General Purpose 3150 124 4.0 5.2 1992 4392 K90X8General Purpose 3226 127 5.2 6.8 2141 4720 N/AMaterial Handling 3302 130 4.0 5.2 2049 4517 K90Material Handling 3311 130 4.7 6.1 2207 4866 K90Material Handling 3200 126 4.9 6.4 2130 4696 N/AMaterial Handling 3193 126 4.3 5.6 2108 4647 N/ARock 3252 128 N/A N/A 2405 5302 K90X8Rock 3252 128 N/A N/A 2522 5560 J350X8Rock 3252 128 N/A N/A 2522 5560 K90X8Heavy Duty Rock 3251 128 3.6 4.7 2425 5346 J350Heavy Duty Rock 3252 128 3.6 4.7 2562 5648 K90Heavy Duty Rock 3251 128 4.0 5.2 2949 6501 K90Woodchip 3327 131 8.0 10.46 2474 5454 N/AWoodchip 3937 155 9.9 13.0 2359 5201 N/AWoodchip 3923 154 10.2 13.3 2279 5024 N/A

HPL General Purpose 3023 119 3.8 5.0 1093 2410 K90X8General Purpose 3226 127 4.2 5.5 1986 4378 K90X8General Purpose 3226 127 4.6 6.0 1900 4189 K90X8Woodchip 3328 131 8.0 10.46 2360 5203 N/AWoodchip 3937 155 9.9 13.0 2825 6228 N/A



Edition 44 23-255


23



966, 972

Fusion General Purpose 3307 130 3.8 5.0 1730 3814 K90X8General Purpose 3307 130 4.2 5.5 1808 3986 K90X8General Purpose 3311 130 4.8 6.3 1914 4220 K90X8Rock/Spade 3252 128 N/A N/A 2174 4793 K90X8Rock/Spade 3252 128 N/A N/A 2050 4519 K90X8Material Handling 3311 130 4.2 5.5 1850 4079 K90X8Material Handling 3311 130 4.6 6.0 1882 4149 K90X8Coal 3405 134 6.7 8.8 2271 5007 K90X8Coal 3405 134 7.7 10.1 2454 5410 K90X8Multi-purpose 3220 127 N/A N/A 2785 6140 N/ASide Dump 3677 145 N/A N/A 2832 6243 N/AHigh Dump 3059 120 N/A N/A 2862 6310 N/AGrapple 3048 120 N/A N/A 4380 9656 N/AWaste 3323 131 N/A N/A 2569 5664 N/AWoodchip 3923 154 9.94 13 2543 5606 N/A

980H, 980G





Rock Performance Series 3510 138 N/A N/A 3402 7500 K100X8Rock Performance Series 3510 138 N/A N/A 3531 7785 K100X8General Purpose 3531 139 4.8 6.3 2340 5159 K100X8General Purpose 3531 139 5.2 6.8 2430 5357 K100X8General Purpose 3531 139 5.5 7.2 2503 5518 K100X8General Purpose 3413 134 N/A N/A 2580 5688 K100X8General Purpose 3531 139 5.2 6.8 2398 5287 K100X8General Purpose 3531 139 5.5 7.2 2654 5851 K100X8General Purpose-HD 3533 139 5.5 7.2 3167 6982 K100X8Material Handling 3531 139 5.7 7.5 2727 6012 K100X8Material Handling 3683 145 7.5 9.7 3512 7743 K100X8Rock 3480 137 N/A N/A 2576 5679 J400X8Rock 3492 137 N/A N/A 2754 6072 K100X8Rock 3492 137 N/A N/A 3084 6799 J400X8Rock 3492 137 N/A N/A 3132 6905 K100X8Coal 3638 143 N/A N/A 3622 7985 N/AWoodchip 4165 164 N/A N/A 3996 8810 N/A

Pin On Coal 3800 150 6.5 8.5 4511 9945 K110Coal 4120 162 11.5 15.0 5910 13,029 BOCE IncludedCoal 4120 162 13.0 17.0 6325 13,944 BOCE IncludedGeneral Purpose 2695 106 7.0 9.2 4218 9299 K110General Purpose 3900 154 7.7 10.1 4770 10,516 BOCE IncludedRock 3835 151 6.4 8.4 4815 10,615 K130Rock 4026 159 6.9 9.0 4662 10,278 K110Rock 4026 159 7.7 10.1 4600 10,141 K110



23-256 Edition 44



990H Pin On Rock 4450 175 8.5 11.1 6772 14,930 K130Rock 4597 181 9.2 12.0 7038 15,516 K130Heavy Duty Rock 4510 178 8.5 11.1 8594 18,947 K130 MAWPsHeavy Duty Granite 4620 182 8.5 11.1 9929 21,890 K150 MAWPsSlag 4450 175 9.2 12.0 9613 21,193 SerratedSlag 4500 177 8.5 11.1 9149 20,170 K130Coal 4370 172 13.4 17.5 7460 16,446 BOCE IncludedSlag 4450 175 7.0 9.2 8525 18,794 K150Serrated Edge Rock 4610 181 9.5 12.4 8140 17,946 N/A

992K Pin On Rock 4824 190 10.7 14.0 9382 20,684 K150Rock 4884 192 11.5 15.0 9776 21,552 K170Rock 4824 190 11.5 15.0 9557 21,070 K150Rock 4824 190 12.2 16.0 10 574 23,312 K170Heavy Duty Rock 5068 200 10.7 14.0 11 560 25,485 K170High Abrasion Rock 5068 200 10.7 14.0 11 927 26,295 K150Heavy Duty Granite 5165 203 10.7 14.0 13 720 30,247 K150Coal 6170 243 19.0 24.9 12 504 27,567 BOCE IncludedIron Ore 4900 193 9.0 11.8 11 172 24,630 K150Serrated Edge Rock 4824 190 12.3 16.1 10 282 22,668 N/A

992G Pin On Coal 6200 244 23.0 30.0 11 679 25,694 K130Rock 4824 190 12.2 16.0 9783 21,522 K150Rock 6200 244 23.0 30.1 N/A N/A K130Rock 4840 191 11.5 15.0 N/A N/A K150Rock 4824 190 11.5 15.0 9451 20,836 K150Rock 4824 190 12.2 16.0 9704 21,394 K170Rock 5060 199 11.4 14.9 11 674 25,737 K170Heavy Duty Granite 5060 199 11.5 15.0 13 390 29,520 K150

993K Pin On Rock 5068 200 12.2 16.0 12 864 28,360 K170Rock 5068 200 13.0 17.0 13 380 29,498 K170Rock 5068 200 13.8 18.0 14 024 30,918 K170Rock 5068 200 14.5 19.0 14 209 31,325 K170High Abrasion Rock 5160 203 12.2 16.0 15 205 33,521 K170High Abrasion Rock 5160 203 13.0 17.0 15 456 34,075 K170Heavy Duty Granite 5160 203 13.0 17.0 17 418 38,400 K170Coal 6300 248 23.0 30.1 17 673 38,962 K170Iron Ore 5160 203 10.0 13.1 14 063 31,004 K170Serrated Edge Rock 5080 200 15.0 19.6 13 915 30,677 N/A

994F Pin On Rock 5650 222 14.9 19.5 19 302 42,554 J800Rock 5650 222 17.2 22.5 19 525 43,045 J800Rock 5650 222 19.1 25.0 21 282 46,919 J800Rock 6220 245 18.0 23.5 21 427 47,238 J800Rock 6220 245 19.1 25.0 21 777 48,010 J800Coal 6220 245 31.3 40.9 22 211 48,967 J700Coal 6300 248 35.9 47.0 23 598 52,025 Serrated




Edition 44 23-257


23

Buckets● Southeast Asia


IT62G HPL Material Handling 2921 115 3.20 4.2 1259 571 K80X8Woodchip 3277 129 8.40 11.0 1493 677 N/A

950H, 950G, 962H, 962G

Pin On General Purpose 2894 114 3.10 4.1 1507 684 K80X8General Purpose 2894 114 3.30 4.3 1550 703 K80X8Material Handling 2894 114 3.20 4.2 1538 698 K80X8Material Handling 2894 114 3.40 4.4 1584 719 K80X8Material Handling 2894 114 3.80 5.0 1684 764 K80X8General Purpose 2997 118 2.70 3.5 1347 611 K80X8General Purpose 2921 115 3.06 4.0 1483 673 K80X8Material Handling 2946 116 5.73 7.5 1878 852 N/AMaterial Handling 2946 116 4.40 5.8 1905 864 N/AMaterial Handling N/A N/A 3.30 4.3 1326 601 K80X8Waste Handling 3058 120 5.20 6.8 2375 1077 N/A

HPL Woodchip 3327 131 9.20 12.0 2349 1066 N/A966, 972

Pin On General Purpose 3193 126 4.00 5.2 2164 982 K90X8General Purpose 3193 126 4.20 5.5 2220 1007 K90X8General Purpose 3193 126 4.60 6.0 2220 1007 K90X8General Purpose 3193 126 4.60 6.0 2303 1045 K90X8General Purpose 3201 126 5.00 6.5 2332 1058 K90X8Material Handling 3302 130 4.00 5.2 2173 986 K90X8Material Handling 3193 126 4.20 5.5 2108 956 K90X8Material Handling 3193 126 4.60 6.0 2152 976 K90X8Rock 3255 128 3.40 4.4 2362 1071 K90X8Rock 3255 128 4.00 5.2 2397 1087 K90X8General Purpose 3150 124 3.80 5.0 2188 992 K90X8General Purpose 3150 124 3.60 4.7 1903 863 K90X8General Purpose 3150 124 4.00 5.2 1992 904 K90X8Material Handling 3454 136 5.73 7.5 2586 1173 N/AMaterial Handling 3429 135 7.26 9.5 2595 1177 N/ARock 3252 128 N/A N/A 2405 1091 K90X8Woodchip 3937 155 9.90 12.9 2359 1070 N/A

HPL General Purpose 3023 119 3.82 5.0 1093 496 K90X8General Purpose 3226 127 4.21 5.5 1986 901 K90X8



23-258 Edition 44


Buckets● Southeast Asia


980H, 980G

Pin On General Purpose 3405 134 5.30 6.9 2572 1167 K100X8General Purpose 3405 134 5.70 7.5 2677 1214 K100X8General Purpose 3405 134 7.00 9.2 2726 1237 K100X8Material Handling 3405 134 5.70 7.5 2780 1261 K100X8Rock 3510 138 N/A N/A 3402 1543 K100X8Rock 3510 138 N/A N/A 3531 1602 K100X8General Purpose 3531 139 5.40 7.1 2430 1102 K100X8General Purpose 3531 139 5.70 7.5 2503 1135 K100X8Rock 3492 137 N/A N/A 3084 1399 J400X8Coal 3638 143 N/A N/A 3622 1643 N/A

HPL General Purpose 3454 136 5.00 6.5 2794 1267 K100X8BH Block Handler 3658 144 4.50 5.9 3810 1728 K100X8

988H, 988G

Pin On Coal 3800 150 6.50 8.5 4511 2046 K110Coal 4120 162 11.50 15.0 5910 2681 BOCE IncludedCoal 4120 162 13.00 17.0 6325 2869 BOCE IncludedRock 4026 159 6.90 9.0 4662 2115 K110Rock 4026 159 7.70 10.1 4600 2087 K110

990H Pin On Rock 4450 175 8.50 11.1 6772 3072 K130Rock 4597 181 9.20 12.0 7038 3192 K130Heavy Duty Granite 4620 182 8.50 11.1 9929 4504 K150 MAWPsSlag 4450 175 9.20 12.0 9613 4360 Serrated

Weld-On EdgeSlag 4500 177 8.50 11.1 9149 4150 K130

992K Pin On Rock 4824 190 10.70 14.0 9382 4256 K150Rock 4884 192 11.50 15.0 9776 4434 K170Rock 4824 190 11.50 15.0 9557 4335 K150Rock 4824 190 12.20 16.0 10 574 4796 K170Heavy Duty Rock 5068 200 10.70 14.0 11 560 5244 K170High Abrasion Rock 5068 200 10.70 14.0 11 927 5410 K150Heavy Duty Granite 5165 203 10.70 14.0 13 720 6223 K150Serrated Edge Rock 4824 190 12.30 16.1 10 282 4664 N/A

992G Pin On Rock 6200 244 23.00 30.1 N/A N/A K130Rock 4840 191 11.50 15.0 N/A N/A K150Rock 4824 190 11.50 15.0 9451 4287 K150Rock 5060 199 11.40 14.9 11 674 5295 K170Heavy Duty Granite 5060 199 11.50 15.0 13 390 6074 K150

993K Pin On Rock 5068 200 12.20 16.0 12 864 5835 K170Rock 5068 200 14.50 19.0 14 209 6445 K170High Abrasion Rock 5160 203 13.00 17.0 15 456 7011 K170Heavy Duty Granite 5160 203 13.00 17.0 17 418 7901 K170Coal 6300 248 23.00 30.1 17 673 8016 K170Iron Ore 5160 203 10.00 13.1 14 063 6379 K170

994F Pin On Rock 5650 222 14.90 19.5 19 302 8755 J800Rock 5650 222 17.20 22.5 19 525 8857 J800Rock 5639 222 14.00 18.3 18 310 8305 J800Coal 6220 245 31.30 40.9 22 211 10,075 J700Coal 6300 248 35.90 47.0 23 598 10,704 Serrated

Weld-On Edge N/A = Not Applicable


Edition 44 23-259


23

Buckets● China


IT62G IT Woodchip 3277 129 8.40 10.99 1493 3291 N/A950H, 950G, 962H, 962G






General Purpose 2997 118 2.70 3.53 1347 2970 K80X8General Purpose 2921 115 3.06 4.00 1483 3269 K80X8Material Handling 2946 116 5.73 7.49 1878 4140 N/AMaterial Handling 2946 116 4.40 5.75 1905 4200 N/AMaterial Handling N/A 3.30 4.32 1326 2923 K80X8Waste Handling 3058 120 5.20 6.80 2375 5236 N/ARock 2972 117 2.90 3.79 1826 4026 J350X8

966G, 972G









Rock Performance Series 3255 128 3.40 4.45 2362 5207 K90X8Rock Performance Series 3255 128 4.00 5.23 2397 5284 K90X8General Purpose 3193 126 4.96 6.49 2125 4685 K90X8General Purpose 3150 124 3.60 4.71 1903 4195 K90X8General Purpose 3150 124 4.00 5.23 1992 4392 K90X8Material Handling 3302 130 4.00 5.23 2049 4517 K90X8Material Handling 3311 130 4.70 6.15 2207 4866 K90X8Material Handling 3447 136 5.73 7.49 2426 5348 N/ARock 3252 128 — — 2405 5302 K90X8Side Dump 3299 130 3.40 4.45 3855 8499 K80X8



23-260 Edition 44


Buckets● China

Model Interface Bucket Type Width CapacityWeightRange GET

mm in m3 yd3 kg lb980H, 980G

Pin On General Purpose Performance Series

3405 134 5.30 6.93 2572 5670 K100X8

General Purpose Performance Series

3405 134 5.70 7.46 2677 5902 K100X8

General Purpose Performance Series

3405 134 7.00 9.16 2726 6010 K100X8

Material Handling Performance Series

3405 134 5.70 7.46 2780 6129 K100X8

Rock Performance Series 3510 138 5.40 7.10 3402 7500 K100X8Rock Performance Series 3510 138 5.40 7.10 3531 7785 K100X8General Purpose 3531 139 5.40 7.06 2430 5357 K100X8

HPL Block Handler 3658 144 4.50 5.89 3810 8400 K100X8986H Pin On Rock 3772 148.5 5.4-6.1 7-8 3692-3907 8139-8693 J460988H, 988G

Pin On Coal 3800 150 6.50 8.50 4511 9945 K110Coal 4120 162 11.50 15.04 5910 13,029 BOCE IncludedCoal 4120 162 13.00 17.00 6325 13,944 BOCE IncludedGeneral Purpose 3900 154 7.70 10.07 4770 10,516 BOCE IncludedRock 3835 151 6.40 8.37 4815 10,615 K130Rock 4026 159 6.90 9.02 4662 10,278 K110Rock 4026 159 7.70 10.07 4600 10,141 K110

990H Pin On Rock 4450 175 8.50 11.12 6772 14,930 K130Rock 4597 181 9.20 12.03 7038 15,516 K130Heavy Duty Rock 4510 178 8.50 11.12 8594 18,947 K130 MAWPsHeavy Duty Granite 4620 182 8.50 11.12 9929 21,890 K150 MAWPsSlag 4450 175 9.20 12.03 9613 21,193 Serrated

Weld-On EdgeSlag 4500 177 8.50 11.12 9149 20,170 K130

992K Pin On Rock 4824 190 10.70 14.00 9382 20,684 K150Rock 4884 192 11.50 15.04 9776 21,552 K170Rock 4824 190 11.50 15.04 9557 21,070 K150Rock 4824 190 12.20 15.96 10 574 23,312 K170Heavy Duty Rock 5068 200 10.70 14.00 11 560 25,485 K170High Abrasion Rock 5068 200 10.70 14.00 11 927 26,295 K150Heavy Duty Granite 5165 203 10.70 14.00 13 720 30,247 K150Serrated Edge Rock 4824 190 12.30 16.09 10 282 22,668 N/A

992G Pin On Rock 6200 244 23.00 30.08 N/A N/A K130Rock 4840 191 11.50 15.04 N/A N/A K150Rock 4824 190 11.50 15.04 9451 20,836 K150Rock 5060 199 11.40 14.91 11 674 25,737 K170Heavy Duty Granite 5060 199 11.50 15.04 13 390 29,520 K150

993K Pin On Rock 5068 200 12.20 15.96 12 864 28,360 K170Rock 5068 200 14.50 18.97 14 209 31,325 K170High Abrasion Rock 5160 203 13.00 17.00 15 456 34,075 K170Heavy Duty Granite 5160 203 13.00 17.00 17 418 38,400 K170Coal 6300 248 23.00 30.08 17 673 38,962 K170Iron Ore 5160 203 10.00 13.08 14 063 31,004 K170

994F Pin On Rock 5650 222 17.20 22.50 19 525 43,045 J800Rock 5639 222 14.00 18.31 18 310 40,367 J800Coal 6220 245 31.30 40.94 22 211 48,967 J700Coal 6300 248 35.90 46.96 23 598 52,025 Serrated

Weld-On EdgeN/A = Not Applicable


Edition 44 23-261


23

Bucket Selection● 906H2–914G2

906H2Vertical Coupler

Bucket Type Rated CapacityMaximum

Material Density

m3 yd3 kg/m3 lb/yd3

General Purpose 0.90 1.18 1755 2952

Light Material 1.20 1.57 1208 2032

Multi-Purpose 0.75 0.98 2131 3584

906H2Horizontal Coupler


Material Density

m3 yd3 kg/m3 lb/yd3


Light Material 1.20 1.57 1271 2138

Multi-Purpose 0.75 0.98 2184 3674



Material Density

m3 yd3 kg/m3 lb/yd3


Light Material 1.20 1.57 1218 2049

Multi-Purpose 0.75 0.98 2149 3615



Material Density

m3 yd3 kg/m3 lb/yd3


Light Material 1.20 1.57 1310 2203

Multi-Purpose 0.75 0.98 2202 3704



Material Density

m3 yd3 kg/m3 lb/yd3


Light Material 1.50 1.96 1034 1739

Multi-Purpose 0.90 1.18 1929 3245



Material Density

m3 yd3 kg/m3 lb/yd3


Light Material 1.50 1.96 1106 1860

Multi-Purpose 0.90 1.18 1967 3309

914G2

kg/m3

lb/yd3

m3yd3

BU

CK

ET

CA

PAC

ITY

KEY

A — 1.4 m3 (1.8 yd3) General Purpose Bucket, bolt-on edge 1.4 m3 (1.8 yd3) General Purpose Bucket, bolt-on teeth and segments

B — 1.3 m3 (1.7 yd3) General Purpose Bucket, bolt-on edge1.3 m3 (1.7 yd3) General Purpose Bucket, bolt-on teeth and segments1.3 m3 (1.7 yd3) General Bucket, bolt-on teeth1.3 m3 (1.7 yd3) General Purpose Bucket, flush mounted teeth

C — 1.2 m3 (1.6 yd3) General Purpose Bucket, bolt-on teeth

MATERIAL DENSITY (THOUSANDS)


23-262 Edition 44


Bucket Selection● 924K

MATERIAL DENSITY

924K Pin On

BU

CK

ET

CA

PAC

ITY

lb/yd3

kg/m3Bucket

Size

m3yd3

KEY

A — Standard LiftB — High Lift

% = Bucket Fill Factor

115% 100% 95%

MATERIAL DENSITY

924K Fusion

BU

CK

ET

CA

PAC

ITY

lb/yd3

kg/m3

BucketSize

m3yd3


Edition 44 23-263


23


MATERIAL DENSITY

930K Pin On

BU

CK

ET

CA

PAC

ITY

lb/yd3

kg/m3Bucket

Size

m3yd3

KEY



115% 100% 95%

MATERIAL DENSITY

930K Fusion

BU

CK

ET

CA

PAC

ITY

lb/yd3

kg/m3

BucketSize

m3yd3


23-264 Edition 44



MATERIAL DENSITY

938K Pin On

BU

CK

ET

CA

PAC

ITY

lb/yd3

kg/m3

BucketSize

m3yd3

KEY



115% 100% 95%

MATERIAL DENSITY

938K Fusion

BU

CK

ET

CA

PAC

ITY

lb/yd3

kg/m3

BucketSize

m3yd3


Edition 44 23-265


23

924K (LRC)

Bucket Fill Factorkg/m3 1450 1525 1600 1675 1750 1825 1900 1975 2050 2125 2200 2275 2350

lb/yd3 2443 2570 2696 2822 2949 3075 3202 3328 3454 3581 3707 3833 3960

m3 yd3

Gen

eral

Pu

rpo

se

Pin On

1.7 2.2 112% 108% 105% 101% 98%

1.9 2.5 112% 108% 103% 100% 96%

2.1 2.7 115% 110% 105% 101% 97%

Fusion

1.9 2.5 111% 107% 103% 99% 95%

2.1 2.7 114% 109% 104% 100% 96%

2.3 3.0 109% 103% 99% 94%

Bucket Fill Factorkg/m3 650 700 750 800 850 900 950 1000 1050 1100 1150 1200 1250lb/yd3 1095 1180 1264 1348 1432 1517 1601 1685 1769 1854 1938 2022 2106

m3 yd3

Lig

ht

Mat

eria

l Pin On3.5 4.6 114% 108% 103% 98%

4.2 5.5 110% 103% 97%

Fusion3.5 4.6 115% 109% 103% 98%

4.2 5.5 112% 105% 98%

Material density and fill factor are key variables when choosing the appropriate size of the bucket. The long floor and open throat design of the Performance Series Buckets along with the aggressive rack angles of the optimized K Series linkage will demonstrate fill factors greater than 100% ISO rated. Refer to the Fill Factors table for expected fill factor per material density and Bucket Selection table for bucket sizing.

924K (LRC) Fill Factors

Materials Density Fill %

Earth and rock ~ 1800 kg/m3 ~ 3033 lb/yd3 ~ 115%

Sand and gravel ~ 1700 kg/m3 ~ 2865 lb/yd3 ~ 115%

Aggregates ~ 1600 kg/m3 ~ 2696 lb/yd3 ~ 105%

Bulk grains ~ 750 kg/m3 ~ 1264 lb/yd3 ~ 100%

Woodchips ~ 500 kg/m3 ~ 843 lb/yd3 ~ 100%

Bucket Selection● 924K (LRC)


23-266 Edition 44



930K (LRC)

Bucket Fill Factorkg/m3 1375 1450 1525 1600 1675 1750 1825 1900 1975 2050 2125

High Liftlb/yd3 2317 2443 2570 2696 2822 2949 3075 3202 3328 3454 3581

m3 yd3 kg/m3 lb/yd3

Gen

eral

Pu

rpo

se

Pin On

2.1 2.7 111% 106% 102% 98% 95% –573 –965

2.3 3.0 114% 109% 104% 100% 96% –519 –874

2.5 3.3 114% 108% 103% 98% 94% –474 –799

Fusion

2.1 2.7 115% 110% 105% 101% 97% –564 –951

2.3 3.0 114% 109% 104% 99% 95% –511 –862

2.5 3.3 115% 109% 104% 99% 94% –467 –787


High Liftlb/yd3 1095 1180 1264 1348 1432 1517 1601 1685 1769 1854 1938

m3 yd3 kg/m3 lb/yd3

Lig

ht

Mat

eria

l Pin On4.2 5.5 114% 108% 102% 96% –270 –455

5.0 6.5 109% 102% 96% –228 –384

Fusion4.2 5.5 109% 103% 97% –267 –450

5.0 6.5 112% 104% 97% –225 –379










23

Edition 44 23-267



938K (LRC)


High Liftlb/yd3 2317 2443 2570 2696 2822 2949 3075 3202 3328 3454 3581

m3 yd3 kg/m3 lb/yd3

Gen

eral

Pu

rpo

se

Pin On

2.5 3.3 111% 106% 102% 98% 95% –516 –869

2.7 3.5 111% 106% 102% 98% –474 –799

2.9 3.8 113% 108% 103% 98% –439 –740

Fusion

2.5 3.3 110% 106% 101% 97% –506 –853

2.7 3.5 111% 106% 101% 97% –466 –784

2.9 3.8 114% 108% 103% 98% –431 –726


High Liftlb/yd3 1095 1180 1264 1348 1432 1517 1601 1685 1769 1854 1938

m3 yd3 kg/m3 lb/yd3

Lig

ht

Mat

eria

l Pin On4.2 5.5 114% 108% 103% 98% –293 –494

5.0 6.5 113% 107% 101% 95% –248 –417

Fusion4.2 5.5 114% 108% 103% 98% –288 –485

5.0 6.5 115% 108% 101% 96% –243 –410










23-268 Edition 44



950K

800kg/m3

2.70 m3 (3.53 yd3) 3.11 m3 (4.07 yd3) 2.70 m3 (3.53 yd3)

2.90 m3 (3.79 yd3) 3.34 m3 (4.37 yd3) 2.90 m3 (3.79 yd3)

3.10 m3 (4.05 yd3) 3.57 m3 (4.67 yd3) 3.10 m3 (4.05 yd3)

3.30 m3 (4.32 yd3) 3.80 m3 (4.97 yd3) 3.30 m3 (4.32 yd3)

3.40 m3 (4.45 yd3) 3.91 m3 (5.11 yd3) 3.40 m3 (4.45 yd3)

3.60 m3 (4.71 yd3) 4.14 m3 (5.41 yd3) 3.60 m3 (4.71 yd3)

3.80 m3 (4.97 yd3) 4.37 m3 (5.72 yd3) 3.80 m3 (4.97 yd3)

2.70 m3 (3.53 yd3) 3.11 m3 (4.07 yd3) 2.70 m3 (3.53 yd3)

2.90 m3 (3.79 yd3) 3.34 m3 (4.37 yd3) 2.90 m3 (3.79 yd3)

3.10 m3 (4.05 yd3) 3.57 m3 (4.67 yd3) 3.10 m3 (4.05 yd3)

3.30 m3 (4.32 yd3) 3.80 m3 (4.97 yd3) 3.30 m3 (4.32 yd3)

3.40 m3 (4.45 yd3) 3.91 m3 (5.11 yd3) 3.40 m3 (4.45 yd3)

3.60 m3 (4.71 yd3) 4.14 m3 (5.41 yd3) 3.60 m3 (4.71 yd3)

3.80 m3 (4.97 yd3) 4.37 m3 (5.72 yd3) 3.80 m3 (4.97 yd3)

Material Density

GeneralPurpose

MaterialHandling

Stan

dard

Lin

kage

Pin

On

2.70 m3 (3.53 yd3) 3.11 m3 (4.07 yd3) 2.70 m3 (3.53 yd3)

2.90 m3 (3.79 yd3) 3.34 m3 (4.37 yd3) 2.90 m3 (3.79 yd3)

3.10 m3 (4.05 yd3) 3.57 m3 (4.67 yd3) 3.10 m3 (4.05 yd3)

3.30 m3 (4.32 yd3) 3.80 m3 (4.97 yd3) 3.30 m3 (4.32 yd3)

3.40 m3 (4.45 yd3) 3.91 m3 (5.11 yd3) 3.40 m3 (4.45 yd3)

3.60 m3 (4.71 yd3) 4.14 m3 (5.41 yd3) 3.60 m3 (4.71 yd3)

3.80 m3 (4.97 yd3) 4.37 m3 (5.72 yd3) 3.80 m3 (4.97 yd3)

2.70 m3 (3.53 yd3) 3.11 m3 (4.07 yd3) 2.70 m3 (3.53 yd3)

2.90 m3 (3.79 yd3) 3.34 m3 (4.37 yd3) 2.90 m3 (3.79 yd3)

3.10 m3 (4.05 yd3) 3.57 m3 (4.67 yd3) 3.10 m3 (4.05 yd3)

3.30 m3 (4.32 yd3) 3.80 m3 (4.97 yd3) 3.30 m3 (4.32 yd3)

3.40 m3 (4.45 yd3) 3.91 m3 (5.11 yd3) 3.40 m3 (4.45 yd3)

3.60 m3 (4.71 yd3) 4.14 m3 (5.41 yd3) 3.60 m3 (4.71 yd3)

3.80 m3 (4.97 yd3) 4.37 m3 (5.72 yd3) 3.80 m3 (4.97 yd3)

GeneralPurpose

MaterialHandling

Fusi

on Q

C

900 1000 1100 1200 1300 1400 1500 1600 1700 1800 1900 2000 2100 2200 2300 2400

1348

700

1180lb/yd3Material Density

Bucket Fill Factors

NOTE: All buckets are showing Bolt-On Edges. Material Handling buckets are flat floor buckets.These machines meet U.S. EPA Tier 4 Interim/EU Stage IIIB emission standards and are only available in North America and Europe.Contact your local Cat dealer for product availability.

115% 110% 105% 100% 95%

1517 1685 1854 2022 2191 2359 2528 2696 2865 3033 3202 3370 3539 3707 3876 4044

2500

4213


23

Edition 44 23-269



950K

800kg/m3

2.70 m3 (3.53 yd3) 3.11 m3 (4.07 yd3) 2.70 m3 (3.53 yd3)

2.90 m3 (3.79 yd3) 3.34 m3 (4.37 yd3) 2.90 m3 (3.79 yd3)

3.10 m3 (4.05 yd3) 3.57 m3 (4.67 yd3) 3.10 m3 (4.05 yd3)

3.30 m3 (4.32 yd3) 3.80 m3 (4.97 yd3) 3.30 m3 (4.32 yd3)

3.40 m3 (4.45 yd3) 3.91 m3 (5.11 yd3) 3.40 m3 (4.45 yd3)

3.60 m3 (4.71 yd3) 4.14 m3 (5.41 yd3) 3.60 m3 (4.71 yd3)

3.80 m3 (4.97 yd3) 4.37 m3 (5.72 yd3) 3.80 m3 (4.97 yd3)

2.70 m3 (3.53 yd3) 3.11 m3 (4.07 yd3) 2.70 m3 (3.53 yd3)

2.90 m3 (3.79 yd3) 3.34 m3 (4.37 yd3) 2.90 m3 (3.79 yd3)

3.10 m3 (4.05 yd3) 3.57 m3 (4.67 yd3) 3.10 m3 (4.05 yd3)

3.30 m3 (4.32 yd3) 3.80 m3 (4.97 yd3) 3.30 m3 (4.32 yd3)

3.40 m3 (4.45 yd3) 3.91 m3 (5.11 yd3) 3.40 m3 (4.45 yd3)

3.60 m3 (4.71 yd3) 4.14 m3 (5.41 yd3) 3.60 m3 (4.71 yd3)

3.80 m3 (4.97 yd3) 4.37 m3 (5.72 yd3) 3.80 m3 (4.97 yd3)

Material Density

GeneralPurpose

MaterialHandling

Hig

h Li

ft Li

nkag

e

Pin

On

2.70 m3 (3.53 yd3) 3.11 m3 (4.07 yd3) 2.70 m3 (3.53 yd3)

2.90 m3 (3.79 yd3) 3.34 m3 (4.37 yd3) 2.90 m3 (3.79 yd3)

3.10 m3 (4.05 yd3) 3.57 m3 (4.67 yd3) 3.10 m3 (4.05 yd3)

3.30 m3 (4.32 yd3) 3.80 m3 (4.97 yd3) 3.30 m3 (4.32 yd3)

3.40 m3 (4.45 yd3) 3.91 m3 (5.11 yd3) 3.40 m3 (4.45 yd3)

3.60 m3 (4.71 yd3) 4.14 m3 (5.41 yd3) 3.60 m3 (4.71 yd3)

3.80 m3 (4.97 yd3) 4.37 m3 (5.72 yd3) 3.80 m3 (4.97 yd3)

2.70 m3 (3.53 yd3) 3.11 m3 (4.07 yd3) 2.70 m3 (3.53 yd3)

2.90 m3 (3.79 yd3) 3.34 m3 (4.37 yd3) 2.90 m3 (3.79 yd3)

3.10 m3 (4.05 yd3) 3.57 m3 (4.67 yd3) 3.10 m3 (4.05 yd3)

3.30 m3 (4.32 yd3) 3.80 m3 (4.97 yd3) 3.30 m3 (4.32 yd3)

3.40 m3 (4.45 yd3) 3.91 m3 (5.11 yd3) 3.40 m3 (4.45 yd3)

3.60 m3 (4.71 yd3) 4.14 m3 (5.41 yd3) 3.60 m3 (4.71 yd3)

3.80 m3 (4.97 yd3) 4.37 m3 (5.72 yd3) 3.80 m3 (4.97 yd3)

GeneralPurpose

MaterialHandling

Fusi

on Q

C

900 1000 1100 1200 1300 1400 1500 1600 1700 1800 1900 2000 2100 2200 2300 2400

1348

700


Bucket Fill Factors


115% 110% 105% 100% 95%

1517 1685 1854 2022 2191 2359 2528 2696 2865 3033 3202 3370 3539 3707 3876 4044

2500

4213


23-270 Edition 44



950K

800kg/m3

2.70 m3 (3.53 yd3) 3.11 m3 (4.07 yd3) 2.70 m3 (3.53 yd3)

2.90 m3 (3.79 yd3) 3.34 m3 (4.37 yd3) 2.90 m3 (3.79 yd3)

3.10 m3 (4.05 yd3) 3.57 m3 (4.67 yd3) 3.10 m3 (4.05 yd3)

3.30 m3 (4.32 yd3) 3.80 m3 (4.97 yd3) 3.30 m3 (4.32 yd3)

3.40 m3 (4.45 yd3) 3.91 m3 (5.11 yd3) 3.40 m3 (4.45 yd3)

3.60 m3 (4.71 yd3) 4.14 m3 (5.41 yd3) 3.60 m3 (4.71 yd3)

3.80 m3 (4.97 yd3) 4.37 m3 (5.72 yd3) 3.80 m3 (4.97 yd3)

2.70 m3 (3.53 yd3) 3.11 m3 (4.07 yd3) 2.70 m3 (3.53 yd3)

2.90 m3 (3.79 yd3) 3.34 m3 (4.37 yd3) 2.90 m3 (3.79 yd3)

3.10 m3 (4.05 yd3) 3.57 m3 (4.67 yd3) 3.10 m3 (4.05 yd3)

3.30 m3 (4.32 yd3) 3.80 m3 (4.97 yd3) 3.30 m3 (4.32 yd3)

3.40 m3 (4.45 yd3) 3.91 m3 (5.11 yd3) 3.40 m3 (4.45 yd3)

3.60 m3 (4.71 yd3) 4.14 m3 (5.41 yd3) 3.60 m3 (4.71 yd3)

3.80 m3 (4.97 yd3) 4.37 m3 (5.72 yd3) 3.80 m3 (4.97 yd3)

Material Density

GeneralPurpose

MaterialHandling

Pow

er P

acka

ge

Pin

On

2.70 m3 (3.53 yd3) 3.11 m3 (4.07 yd3) 2.70 m3 (3.53 yd3)

2.90 m3 (3.79 yd3) 3.34 m3 (4.37 yd3) 2.90 m3 (3.79 yd3)

3.10 m3 (4.05 yd3) 3.57 m3 (4.67 yd3) 3.10 m3 (4.05 yd3)

3.30 m3 (4.32 yd3) 3.80 m3 (4.97 yd3) 3.30 m3 (4.32 yd3)

3.40 m3 (4.45 yd3) 3.91 m3 (5.11 yd3) 3.40 m3 (4.45 yd3)

3.60 m3 (4.71 yd3) 4.14 m3 (5.41 yd3) 3.60 m3 (4.71 yd3)

3.80 m3 (4.97 yd3) 4.37 m3 (5.72 yd3) 3.80 m3 (4.97 yd3)

2.70 m3 (3.53 yd3) 3.11 m3 (4.07 yd3) 2.70 m3 (3.53 yd3)

2.90 m3 (3.79 yd3) 3.34 m3 (4.37 yd3) 2.90 m3 (3.79 yd3)

3.10 m3 (4.05 yd3) 3.57 m3 (4.67 yd3) 3.10 m3 (4.05 yd3)

3.30 m3 (4.32 yd3) 3.80 m3 (4.97 yd3) 3.30 m3 (4.32 yd3)

3.40 m3 (4.45 yd3) 3.91 m3 (5.11 yd3) 3.40 m3 (4.45 yd3)

3.60 m3 (4.71 yd3) 4.14 m3 (5.41 yd3) 3.60 m3 (4.71 yd3)

3.80 m3 (4.97 yd3) 4.37 m3 (5.72 yd3) 3.80 m3 (4.97 yd3)

GeneralPurpose

MaterialHandling

Fusi

on Q

C

900 1000 1100 1200 1300 1400 1500 1600 1700 1800 1900 2000 2100 2200 2300 2400

1348

700


Bucket Fill Factors


115% 110% 105% 100% 95%

1517 1685 1854 2022 2191 2359 2528 2696 2865 3033 3202 3370 3539 3707 3876 4044

2500

4213


Edition 44 23-271


23


962K

800kg/m3

2.70 m3 (3.53 yd3) 3.11 m3 (4.07 yd3) 2.70 m3 (3.53 yd3)

2.90 m3 (3.79 yd3) 3.34 m3 (4.37 yd3) 2.90 m3 (3.79 yd3)

3.10 m3 (4.05 yd3) 3.57 m3 (4.67 yd3) 3.10 m3 (4.05 yd3)

3.30 m3 (4.32 yd3) 3.80 m3 (4.97 yd3) 3.30 m3 (4.32 yd3)

3.40 m3 (4.45 yd3) 3.91 m3 (5.11 yd3) 3.40 m3 (4.45 yd3)

3.60 m3 (4.71 yd3) 4.14 m3 (5.41 yd3) 3.60 m3 (4.71 yd3)

3.80 m3 (4.97 yd3) 4.37 m3 (5.72 yd3) 3.80 m3 (4.97 yd3)

2.70 m3 (3.53 yd3) 3.11 m3 (4.07 yd3) 2.70 m3 (3.53 yd3)

2.90 m3 (3.79 yd3) 3.34 m3 (4.37 yd3) 2.90 m3 (3.79 yd3)

3.10 m3 (4.05 yd3) 3.57 m3 (4.67 yd3) 3.10 m3 (4.05 yd3)

3.30 m3 (4.32 yd3) 3.80 m3 (4.97 yd3) 3.30 m3 (4.32 yd3)

3.40 m3 (4.45 yd3) 3.91 m3 (5.11 yd3) 3.40 m3 (4.45 yd3)

3.60 m3 (4.71 yd3) 4.14 m3 (5.41 yd3) 3.60 m3 (4.71 yd3)

3.80 m3 (4.97 yd3) 4.37 m3 (5.72 yd3) 3.80 m3 (4.97 yd3)

Material Density

GeneralPurpose

MaterialHandling

Stan

dard

Lin

kage

Pin

On

2.70 m3 (3.53 yd3) 3.11 m3 (4.07 yd3) 2.70 m3 (3.53 yd3)

2.90 m3 (3.79 yd3) 3.34 m3 (4.37 yd3) 2.90 m3 (3.79 yd3)

3.10 m3 (4.05 yd3) 3.57 m3 (4.67 yd3) 3.10 m3 (4.05 yd3)

3.30 m3 (4.32 yd3) 3.80 m3 (4.97 yd3) 3.30 m3 (4.32 yd3)

3.40 m3 (4.45 yd3) 3.91 m3 (5.11 yd3) 3.40 m3 (4.45 yd3)

3.60 m3 (4.71 yd3) 4.14 m3 (5.41 yd3) 3.60 m3 (4.71 yd3)

3.80 m3 (4.97 yd3) 4.37 m3 (5.72 yd3) 3.80 m3 (4.97 yd3)

2.70 m3 (3.53 yd3) 3.11 m3 (4.07 yd3) 2.70 m3 (3.53 yd3)

2.90 m3 (3.79 yd3) 3.34 m3 (4.37 yd3) 2.90 m3 (3.79 yd3)

3.10 m3 (4.05 yd3) 3.57 m3 (4.67 yd3) 3.10 m3 (4.05 yd3)

3.30 m3 (4.32 yd3) 3.80 m3 (4.97 yd3) 3.30 m3 (4.32 yd3)

3.40 m3 (4.45 yd3) 3.91 m3 (5.11 yd3) 3.40 m3 (4.45 yd3)

3.60 m3 (4.71 yd3) 4.14 m3 (5.41 yd3) 3.60 m3 (4.71 yd3)

3.80 m3 (4.97 yd3) 4.37 m3 (5.72 yd3) 3.80 m3 (4.97 yd3)

GeneralPurpose

MaterialHandling

Fusi

on Q

C

900 1000 1100 1200 1300 1400 1500 1600 1700 1800 1900 2000 2100 2200 2300 2400

1348

700


Bucket Fill Factors


115% 110% 105% 100% 95%

1517 1685 1854 2022 2191 2359 2528 2696 2865 3033 3202 3370 3539 3707 3876 4044

2500

4213


23-272 Edition 44



962K

800kg/m3

2.70 m3 (3.53 yd3) 3.11 m3 (4.07 yd3) 2.70 m3 (3.53 yd3)

2.90 m3 (3.79 yd3) 3.34 m3 (4.37 yd3) 2.90 m3 (3.79 yd3)

3.10 m3 (4.05 yd3) 3.57 m3 (4.67 yd3) 3.10 m3 (4.05 yd3)

3.30 m3 (4.32 yd3) 3.80 m3 (4.97 yd3) 3.30 m3 (4.32 yd3)

3.40 m3 (4.45 yd3) 3.91 m3 (5.11 yd3) 3.40 m3 (4.45 yd3)

3.60 m3 (4.71 yd3) 4.14 m3 (5.41 yd3) 3.60 m3 (4.71 yd3)

3.80 m3 (4.97 yd3) 4.37 m3 (5.72 yd3) 3.80 m3 (4.97 yd3)

2.70 m3 (3.53 yd3) 3.11 m3 (4.07 yd3) 2.70 m3 (3.53 yd3)

2.90 m3 (3.79 yd3) 3.34 m3 (4.37 yd3) 2.90 m3 (3.79 yd3)

3.10 m3 (4.05 yd3) 3.57 m3 (4.67 yd3) 3.10 m3 (4.05 yd3)

3.30 m3 (4.32 yd3) 3.80 m3 (4.97 yd3) 3.30 m3 (4.32 yd3)

3.40 m3 (4.45 yd3) 3.91 m3 (5.11 yd3) 3.40 m3 (4.45 yd3)

3.60 m3 (4.71 yd3) 4.14 m3 (5.41 yd3) 3.60 m3 (4.71 yd3)

3.80 m3 (4.97 yd3) 4.37 m3 (5.72 yd3) 3.80 m3 (4.97 yd3)

Material Density

GeneralPurpose

MaterialHandling

Hig

h Li

ft Li

nkag

e

Pin

On

2.70 m3 (3.53 yd3) 3.11 m3 (4.07 yd3) 2.70 m3 (3.53 yd3)

2.90 m3 (3.79 yd3) 3.34 m3 (4.37 yd3) 2.90 m3 (3.79 yd3)

3.10 m3 (4.05 yd3) 3.57 m3 (4.67 yd3) 3.10 m3 (4.05 yd3)

3.30 m3 (4.32 yd3) 3.80 m3 (4.97 yd3) 3.30 m3 (4.32 yd3)

3.40 m3 (4.45 yd3) 3.91 m3 (5.11 yd3) 3.40 m3 (4.45 yd3)

3.60 m3 (4.71 yd3) 4.14 m3 (5.41 yd3) 3.60 m3 (4.71 yd3)

3.80 m3 (4.97 yd3) 4.37 m3 (5.72 yd3) 3.80 m3 (4.97 yd3)

2.70 m3 (3.53 yd3) 3.11 m3 (4.07 yd3) 2.70 m3 (3.53 yd3)

2.90 m3 (3.79 yd3) 3.34 m3 (4.37 yd3) 2.90 m3 (3.79 yd3)

3.10 m3 (4.05 yd3) 3.57 m3 (4.67 yd3) 3.10 m3 (4.05 yd3)

3.30 m3 (4.32 yd3) 3.80 m3 (4.97 yd3) 3.30 m3 (4.32 yd3)

3.40 m3 (4.45 yd3) 3.91 m3 (5.11 yd3) 3.40 m3 (4.45 yd3)

3.60 m3 (4.71 yd3) 4.14 m3 (5.41 yd3) 3.60 m3 (4.71 yd3)

3.80 m3 (4.97 yd3) 4.37 m3 (5.72 yd3) 3.80 m3 (4.97 yd3)

GeneralPurpose

MaterialHandling

Fusi

on Q

C

900 1000 1100 1200 1300 1400 1500 1600 1700 1800 1900 2000 2100 2200 2300 2400

1348

700


Bucket Fill Factors


115% 110% 105% 100% 95%

1517 1685 1854 2022 2191 2359 2528 2696 2865 3033 3202 3370 3539 3707 3876 4044

2500

4213


Edition 44 23-273


23

Bucket Selection● 966M

966M

800kg/m3

3.80 m3 (4.97 yd3) 4.37 m3 (5.72 yd3) 3.80 m3 (4.97 yd3)

4.60 m3 (6.02 yd3) 4.00 m3 (5.23 yd3)

4.83 m3 (6.32 yd3) 4.20 m3 (5.49 yd3)

4.83 m3 (6.32 yd3) 4.20 m3 (5.49 yd3)

5.06 m3 (6.62 yd3) 4.40 m3 (5.75 yd3)

5.29 m3 (6.92 yd3) 4.60 m3 (6.02 yd3)

4.83 m3 (6.32 yd3) 4.20 m3 (5.49 yd3)

5.29 m3 (6.92 yd3) 4.60 m3 (6.02 yd3)

4.83 m3 (6.32 yd3) 4.20 m3 (5.49 yd3)

4.00 m3 (5.23 yd3)

4.20 m3 (5.49 yd3)

4.20 m3 (5.49 yd3)

4.40 m3 (5.75 yd3)

4.60 m3 (6.02 yd3)

4.20 m3 (5.49 yd3)

4.60 m3 (6.02 yd3)

4.20 m3 (5.49 yd3)

Material Density

GeneralPurpose

MaterialHandling/Standard

MaterialHandling/

Heavy Duty

GeneralPurpose

Stan

dard

Lin

kage

Pin

On

Hoo

k O

n

900 1000 1100 1200 1300 1400 1500 1600 1700 1800 1900 2000 2100 2200 2300 2400

1348

700


Bucket Fill Factors115% 110% 105% 100% 95%

1517 1685 1854 2022 2191 2359 2528 2696 2865 3033 3202 3370 3539 3707 3876 4044

NOTE: All buckets are showing Bolt-On Edges.These machines meet U.S. EPA Tier 4 Final/EU Stage IV emission standards and are only available in North America and Europe.Contact your local Cat dealer for product availability.


23-274 Edition 44



966K

800kg/m3

3.80 m3 (4.97 yd3) 4.37 m3 (5.72 yd3) 3.80 m3 (4.97 yd3)

4.60 m3 (6.02 yd3) 4.00 m3 (5.23 yd3)

4.83 m3 (6.32 yd3) 4.20 m3 (5.49 yd3)

5.29 m3 (6.92 yd3) 4.60 m3 (6.02 yd3)

4.83 m3 (6.32 yd3) 4.20 m3 (5.49 yd3)

3.91 m3 (5.11 yd3) 3.40 m3 (4.45 yd3)

8.17 m3 (10.69 yd3) 7.10 m3 (9.29 yd3)

4.37 m3 (5.72 yd3) 3.80 m3 (4.97 yd3)

4.83 m3 (6.32 yd3) 4.20 m3 (5.49 yd3)

5.29 m3 (6.92 yd3) 4.60 m3 (6.02 yd3)

8.17 m3 (10.69 yd3) 7.10 m3 (9.29 yd3)

4.00 m3 (5.23 yd3)

4.20 m3 (5.49 yd3)

4.60 m3 (6.02 yd3)

4.20 m3 (5.49 yd3)

3.40 m3 (4.45 yd3)

7.10 m3 (9.29 yd3)

3.80 m3 (4.97 yd3)

4.20 m3 (5.49 yd3)

4.60 m3 (6.02 yd3)

7.10 m3 (9.29 yd3)

Material Density

GeneralPurpose

MaterialHandling

Rock

Coal

GeneralPurpose

Coal

Stan

dard

Lin

kage

Pin

On

Fusi

on Q

C

900 1000 1100 1200 1300 1400 1500 1600 1700 1800 1900 2000 2100 2200 2300 2400

1348

700



1517 1685 1854 2022 2191 2359 2528 2696 2865 3033 3202 3370 3539 3707 3876 4044

2500

4213



Edition 44 23-275


23


966K

800kg/m3

3.80 m3 (4.97 yd3) 4.37 m3 (5.72 yd3) 3.80 m3 (4.97 yd3)

4.60 m3 (6.02 yd3) 4.00 m3 (5.23 yd3)

4.83 m3 (6.32 yd3) 4.20 m3 (5.49 yd3)

5.29 m3 (6.92 yd3) 4.60 m3 (6.02 yd3)

4.83 m3 (6.32 yd3) 4.20 m3 (5.49 yd3)

3.91 m3 (5.11 yd3) 3.40 m3 (4.45 yd3)

8.17 m3 (10.69 yd3) 7.10 m3 (9.29 yd3)

4.37 m3 (5.72 yd3) 3.80 m3 (4.97 yd3)

4.83 m3 (6.32 yd3) 4.20 m3 (5.49 yd3)

5.29 m3 (6.92 yd3) 4.60 m3 (6.02 yd3)

8.17 m3 (10.69 yd3) 7.10 m3 (9.29 yd3)

4.00 m3 (5.23 yd3)

4.20 m3 (5.49 yd3)

4.60 m3 (6.02 yd3)

4.20 m3 (5.49 yd3)

3.40 m3 (4.45 yd3)

7.10 m3 (9.29 yd3)

3.80 m3 (4.97 yd3)

4.20 m3 (5.49 yd3)

4.60 m3 (6.02 yd3)

7.10 m3 (9.29 yd3)

Material Density

GeneralPurpose

MaterialHandling

Rock

Coal

GeneralPurpose

Coal

Hig

h Li

ft Li

nkag

e

Pin

On

Fusi

on Q

C

900 1000 1100 1200 1300 1400 1500 1600 1700 1800 1900 2000 2100 2200 2300 2400

1348

700



1517 1685 1854 2022 2191 2359 2528 2696 2865 3033 3202 3370 3539 3707 3876 4044

2500

4213

NOTE: All buckets are showing Bolt-On Edges. Material Handling buckets are flat floor buckets.These machines meet U.S. EPA Tier 4 Interim/EU Stage IIIB emission standards and are only available in North America and Europe.Contact your local Cat dealer for product availabilit


23-276 Edition 44


Bucket Selection● 972M

972M

800kg/m3

4.20 m3 (5.49 yd3) 4.83 m3 (6.32 yd3) 4.20 m3 (5.49 yd3)

5.29 m3 (6.92 yd3) 4.60 m3 (6.02 yd3)

5.52 m3 (7.22 yd3) 4.80 m3 (6.28 yd3)

5.75 m3 (7.52 yd3) 5.00 m3 (6.54 yd3)

5.52 m3 (7.22 yd3) 4.80 m3 (6.28 yd3)

5.75 m3 (7.52 yd3) 5.00 m3 (6.54 yd3)

5.75 m3 (7.52 yd3) 5.00 m3 (6.54 yd3)

5.98 m3 (7.82 yd3) 5.20 m3 (6.80 yd3)

4.60 m3 (5.75 yd3)

4.80 m3 (6.28 yd3)

5.00 m3 (6.54 yd3)

4.80 m3 (6.28 yd3)

5.00 m3 (6.54 yd3)

5.00 m3 (6.54 yd3)

5.20 m3 (6.80 yd3)

Material Density

GeneralPurpose


MaterialHandling/

Heavy Duty

Stan

dard

Lin

kage

Pin

On

900 1000 1100 1200 1300 1400 1500 1600 1700 1800 1900 2000 2100 2200 2300 2400

1348

700



1517 1685 1854 2022 2191 2359 2528 2696 2865 3033 3202 3370 3539 3707 3876 4044

NOTE: All buckets are showing Bolt-On Edges.These machines meet U.S. EPA Tier 4 Final/EU Stage IV emission standards and are only available in North America and Europe.Contact your local Cat dealer for product availability.


Edition 44 23-277


23


972K

800kg/m3

4.20 m3 (5.49 yd3) 4.83 m3 (6.32 yd3) 4.20 m3 (5.49 yd3)

5.06 m3 (6.62 yd3) 4.40 m3 (5.75 yd3)

5.29 m3 (6.92 yd3) 4.60 m3 (6.02 yd3)

5.52 m3 (7.22 yd3) 4.80 m3 (6.28 yd3)

5.75 m3 (7.52 yd3) 5.00 m3 (6.54 yd3)

5.29 m3 (6.92 yd3) 4.60 m3 (6.02 yd3)

4.14 m3 (5.42 yd3) 3.42 m3 (4.47 yd3)

4.60 m3 (6.02 yd3) 3.80 m3 (4.97 yd3)

8.17 m3 (10.69 yd3) 7.10 m3 (9.29 yd3)

4.83 m3 (6.32 yd3) 4.20 m3 (5.49 yd3)

5.06 m3 (6.62 yd3) 4.40 m3 (5.75 yd3)

5.29 m3 (6.92 yd3) 4.60 m3 (6.02 yd3)

5.52 m3 (7.22 yd3) 4.80 m3 (6.28 yd3)

5.75 m3 (7.52 yd3) 5.00 m3 (6.54 yd3)

4.14 m3 (5.42 yd3) 3.42 m3 (4.47 yd3)

8.17 m3 (10.69 yd3) 7.10 m3 (9.29 yd3)

4.40 m3 (5.75 yd3)

4.60 m3 (6.02 yd3)

4.80 m3 (6.28 yd3)

5.00 m3 (6.54 yd3)

4.60 m3 (6.02 yd3)

3.60 m3 (4.71 yd3)

4.00 m3 (5.23 yd3)

7.10 m3 (9.29 yd3)

4.20 m3 (5.49 yd3)

4.40 m3 (5.75 yd3)

4.60 m3 (6.02 yd3)

4.80 m3 (6.28 yd3)

5.00 m3 (6.54 yd3)

3.60 m3 (4.71 yd3)

7.10 m3 (9.29 yd3)

Material Density

GeneralPurpose

MaterialHandling

Rock

Coal

GeneralPurpose

Rock

Coal

Stan

dard

Lin

kage

Pin

On

Fusi

on Q

C

900 1000 1100 1200 1300 1400 1500 1600 1700 1800 1900 2000 2100 2200 2300 2400

1348

700



1517 1685 1854 2022 2191 2359 2528 2696 2865 3033 3202 3370 3539 3707 3876 4044

2500

4213



23-278 Edition 44



972K

800kg/m3

4.20 m3 (5.49 yd3) 4.83 m3 (6.32 yd3) 4.20 m3 (5.49 yd3)

5.06 m3 (6.62 yd3) 4.40 m3 (5.75 yd3)

5.29 m3 (6.92 yd3) 4.60 m3 (6.02 yd3)

5.52 m3 (7.22 yd3) 4.80 m3 (6.28 yd3)

5.75 m3 (7.52 yd3) 5.00 m3 (6.54 yd3)

5.29 m3 (6.92 yd3) 4.60 m3 (6.02 yd3)

4.14 m3 (5.42 yd3) 3.42 m3 (4.47 yd3)

4.60 m3 (6.02 yd3) 3.80 m3 (4.97 yd3)

8.17 m3 (10.69 yd3) 7.10 m3 (9.29 yd3)

4.83 m3 (6.32 yd3) 4.20 m3 (5.49 yd3)

5.06 m3 (6.62 yd3) 4.40 m3 (5.75 yd3)

5.29 m3 (6.92 yd3) 4.60 m3 (6.02 yd3)

5.52 m3 (7.22 yd3) 4.80 m3 (6.28 yd3)

5.75 m3 (7.52 yd3) 5.00 m3 (6.54 yd3)

4.14 m3 (5.42 yd3) 3.42 m3 (4.47 yd3)

8.17 m3 (10.69 yd3) 7.10 m3 (9.29 yd3)

4.40 m3 (5.75 yd3)

4.60 m3 (6.02 yd3)

4.80 m3 (6.28 yd3)

5.00 m3 (6.54 yd3)

4.60 m3 (6.02 yd3)

3.60 m3 (4.71 yd3)

4.00 m3 (5.23 yd3)

7.10 m3 (9.29 yd3)

4.20 m3 (5.49 yd3)

4.40 m3 (5.75 yd3)

4.60 m3 (6.02 yd3)

4.80 m3 (6.28 yd3)

5.00 m3 (6.54 yd3)

3.60 m3 (4.71 yd3)

7.10 m3 (9.29 yd3)

Material Density

GeneralPurpose

MaterialHandling

Rock

Coal

GeneralPurpose

Rock

Coal

Hig

h Li

ft Li

nkag

e

Pin

On

Fusi

on Q

C

900 1000 1100 1200 1300 1400 1500 1600 1700 1800 1900 2000 2100 2200 2300 2400

1348

700



1517 1685 1854 2022 2191 2359 2528 2696 2865 3033 3202 3370 3539 3707 3876 4044

2500

4213

800kg/m3

5.29 m3 (6.92 yd3) 4.60 m3 (6.02 yd3)

5.64 m3 (7.38 yd3) 4.90 m3 (6.41 yd3)

5.29 m3 (6.92 yd3) 4.60 m3 (6.02 yd3)

5.64 m3 (7.38 yd3) 4.90 m3 (6.41 yd3)

4.60 m3 (6.02 yd3)

4.90 m3 (6.41 yd3)

4.60 m3 (6.02 yd3)

4.90 m3 (6.41 yd3)

Material Density

GeneralPurpose

GeneralPurpose

Exte

nded

Cap

acity

Lin

kage

Pin

On

Fusi

on Q

C

900 1000 1100 1200 1300 1400 1500 1600 1700 1800 1900 2000 2100 2200 2300 2400

1348

700



1517 1685 1854 2022 2191 2359 2528 2696 2865 3033 3202 3370 3539 3707 3876 4044

2500

4213



Edition 44 23-279


23


980K

800kg/m3

5.40 m3 (7.06 yd3) 6.21 m3 (8.12 yd3) 5.40 m3 (7.06 yd3)

5.06 m3 (6.62 yd3) 4.40 m3 (5.75 yd3)

9.43 m3 (12.33 yd3) 8.20 m3 (10.73 yd3)

4.40 m3 (5.75 yd3)

8.20 m3 (10.73 yd3)

Material Density

GeneralPurpose

Rock

Coal

Stan

dard

Lin

kage

Pin

On

900 1000 1100 1200 1300 1400 1500 1600 1700 1800 1900 2000 2100 2200 2300 2400

1348

700



1517 1685 1854 2022 2191 2359 2528 2696 2865 3033 3202 3370 3539 3707 3876 4044

2500

4213

800kg/m3

5.40 m3 (7.06 yd3) 6.21 m3 (8.12 yd3) 5.40 m3 (7.06 yd3)

5.06 m3 (6.62 yd3) 4.40 m3 (5.75 yd3)

9.43 m3 (12.33 yd3) 8.20 m3 (10.73 yd3)

4.40 m3 (5.75 yd3)

8.20 m3 (10.73 yd3)

Material Density

GeneralPurpose

Rock

Coal

Hig

h Li

ft Li

nkag

e

Pin

On

900 1000 1100 1200 1300 1400 1500 1600 1700 1800 1900 2000 2100 2200 2300 2400

1348

700



1517 1685 1854 2022 2191 2359 2528 2696 2865 3033 3202 3370 3539 3707 3876 4044

2500

4213

800kg/m3

6.56 m3 (8.58 yd3) 5.70 m3 (7.46 yd3)

6.90 m3 (9.02 yd3) 6.00 m3 (7.85 yd3)

5.70 m3 (7.46 yd3)

6.56 m3 (8.58 yd3) 5.70 m3 (7.46 yd3)5.70 m3 (7.46 yd3)

6.00 m3 (7.85 yd3)

Material Density

GeneralPurpose

MaterialHandling

Agg

rega

tePa

ckag

e Li

nkag

e

Pin

On

900 1000 1100 1200 1300 1400 1500 1600 1700 1800 1900 2000 2100 2200 2300 2400

1348

700



1517 1685 1854 2022 2191 2359 2528 2696 2865 3033 3202 3370 3539 3707 3876 4044

2500

4213



23-280 Edition 44


Bucket Selection● 950 GC

950 GC

800kg/m3

3.10 m3 3.57 m3 3.10 m3

3.80 m3 3.30 m3

3.91 m3 3.40 m3

4.14 m3 3.60 m3

3.57 m3 3.10 m3

3.30 m3

3.40 m3

3.60 m3

3.10 m3

Material Density

Pin On

Hook On

Stan

dard

Lin

kage

Gen

eral

Pur

pose

900 1000 1100 1200 1300 1400 1500 1600 1700 1800 1900 2000 2100 2200 2300 2400700


2500

NOTE: All buckets are showing Bolt-On Edges.


Edition 44 23-281


23

Bucket Selection● 950H

950H

800kg/m3 900 1000 1100 1200 1300 1400 1500 1600 1700 1800 1900 2000 2100 2200 2300 2400

1,348

700

1,180lb/yd3 1,517 1,685 1,854 2,022 2,191 2,359 2,528 2,696 2,865 3,033 3,202 3,370 3,539 3,707 3,876 4,044

2500

4,213

3.11 m3 (4.07 yd3) 2.70 m3 (3.53 yd3)

3.57 m3 (4.67 yd3) 3.10 m3 (4.05 yd3)

3.91 m3 (5.11 yd3) 3.40 m3 (4.45 yd3)

4.14 m3 (5.41 yd3) 3.60 m3 (4.71 yd3)

3.91 m3 (5.11 yd3) 3.40 m3 (4.45 yd3)

2.70 m3 (3.53 yd3)

3.10 m3 (4.05 yd3)

Material Density

GeneralPurpose

MaterialHandling

MaterialHandling

GeneralPurpose

Stan

dard

Lin

kage

Hig

h LI

ft Li

nkag

e

Pin

On

Pin

On

Material Density

115% 110% 105% 100% 95%

3.40 m3 (4.45 yd3)

3.20 m3 (4.19 yd3)

3.40 m3 (4.45 yd3)

3.60 m3 (4.71 yd3)

2.70 m3 (3.53 yd3)

3.10 m3 (4.05 yd3)

3.40 m3 (4.45 yd3)

3.20 m3 (4.19 yd3)

3.40 m3 (4.45 yd3)

3.60 m3 (4.71 yd3)

Bucket Fill Factors


3.68 m3 (4.81 yd3) 3.20 m3 (4.19 yd3)

3.11 m3 (4.07 yd3) 2.70 m3 (3.53 yd3)

3.57 m3 (4.67 yd3) 3.10 m3 (4.05 yd3)

3.91 m3 (5.11 yd3) 3.40 m3 (4.45 yd3)

4.14 m3 (5.41 yd3) 3.60 m3 (4.71 yd3)

3.91 m3 (5.11 yd3) 3.40 m3 (4.45 yd3)

3.68 m3 (4.81 yd3) 3.20 m3 (4.19 yd3)


23-282 Edition 44


962H

800kg/m3 900 1000 1100 1200 1300 1400 1500 1600 1700 1800 1900 2000 2100 2200 2300 2400

1,348

700

1,180lb/yd3 1,517 1,685 1,854 2,022 2,191 2,359 2,528 2,696 2,865 3,033 3,202 3,370 3,539 3,707 3,876 4,044

2500

4,213

3.57 m3 (4.67 yd3) 3.10 m3 (4.05 yd3)

3.91 m3 (5.11 yd3) 3.40 m3 (4.45 yd3)

4.14 m3 (5.41 yd3) 3.60 m3 (4.71 yd3)

4.37 m3 (5.72 yd3) 3.80 m3 (4.97 yd3)

4.14 m3 (5.41 yd3) 3.60 m3 (4.71 yd3)

3.10 m3 (4.05 yd3)

3.40 m3 (4.45 yd3)

Material Density

GeneralPurpose

MaterialHandling

MaterialHandling

GeneralPurpose

Stan

dard

Lin

kage

Hig

h LI

ft Li

nkag

e

Pin

On

Pin

On

Material Density

115% 110% 105% 100% 95%

3.60 m3 (4.71 yd3)

3.40 m3 (4.45 yd3)

3.60 m3 (4.71 yd3)

3.80 m3 (4.97 yd3)

3.10 m3 (4.05 yd3)

3.40 m3 (4.45 yd3)

3.60 m3 (4.71 yd3)

3.40 m3 (4.45 yd3)

3.60 m3 (4.71 yd3)

3.80 m3 (4.97 yd3)

Bucket Fill Factors


3.91 m3 (5.11 yd3) 3.40 m3 (4.45 yd3)

3.57 m3 (4.67 yd3) 3.10 m3 (4.05 yd3)

3.91 m3 (5.11 yd3) 3.40 m3 (4.45 yd3)

4.14 m3 (5.41 yd3) 3.60 m3 (4.71 yd3)

4.37 m3 (5.72 yd3) 3.80 m3 (4.97 yd3)

4.14 m3 (5.41 yd3) 3.60 m3 (4.71 yd3)

3.91 m3 (5.11 yd3) 3.40 m3 (4.45 yd3)



Edition 44 23-283


23


966H

800kg/m3

3.80 m3 (4.97 yd3) 4.37 m3 (5.72 yd3) 3.80 m3 (4.97 yd3)

4.60 m3 (6.02 yd3) 4.00 m3 (5.23 yd3)

4.83 m3 (6.32 yd3) 4.20 m3 (5.49 yd3)

5.29 m3 (6.92 yd3) 4.60 m3 (6.02 yd3)

3.91 m3 (5.11 yd3) 3.40 m3 (4.45 yd3)

4.60 m3 (6.02 yd3) 4.00 m3 (5.23 yd3)

5.29 m3 (6.92 yd3) 4.60 m3 (6.02 yd3)

4.00 m3 (5.23 yd3)

4.20 m3 (5.49 yd3)

4.60 m3 (6.02 yd3)

3.40 m3 (4.45 yd3)

4.00 m3 (5.23 yd3)

4.60 m3 (6.02 yd3)

Material Density

GeneralPurpose

Rock


Stan

dard

Lin

kage

Pin

On

900 1000 1100 1200 1300 1400 1500 1600 1700 1800 1900 2000 2100 2200 2300 2400

1348

700



1517 1685 1854 2022 2191 2359 2528 2696 2865 3033 3202 3370 3539 3707 3876 4044



972H

800kg/m3

4.20 m3 (5.49 yd3) 4.83 m3 (6.32 yd3) 4.20 m3 (5.49 yd3)

5.29 m3 (6.92 yd3) 4.60 m3 (6.02 yd3)

5.29 m3 (6.92 yd3) 4.60 m3 (6.02 yd3)

4.60 m3 (6.02 yd3) 4.00 m3 (5.23 yd3)

5.29 m3 (6.92 yd3) 4.60 m3 (6.02 yd3)

5.75 m3 (7.52 yd3) 5.00 m3 (6.54 yd3)

4.60 m3 (6.02 yd3)

4.60 m3 (6.02 yd3)

4.00 m3 (5.23 yd3)

4.60 m3 (6.02 yd3)

5.00 m3 (6.54 yd3)

Material Density

GeneralPurpose

Rock


MaterialHandling

Stan

dard

Lin

kage

Pin

On

900 1000 1100 1200 1300 1400 1500 1600 1700 1800 1900 2000 2100 2200 2300 2400

1348

700



1517 1685 1854 2022 2191 2359 2528 2696 2865 3033 3202 3370 3539 3707 3876 4044


23-284 Edition 44




23

Edition 44 23-285



980H

800kg/m3

5.40 m3 (5.70 yd3) 6.21 m3 (8.12 yd3) 5.40 m3 (5.70 yd3)

6.56 m3 (8.58 yd3) 5.70 m3 (7.46 yd3)

6.90 m3 (9.02 yd3) 6.00 m3 (7.85 yd3)

6.56 m3 (8.58 yd3) 5.70 m3 (7.46 yd3)

5.06 m3 (6.62 yd3) 4.40 m3 (5.75 yd3)

9.43 m3 (12.33 yd3) 8.20 m3 (10.73 yd3)

6.56 m3 (8.58 yd3) 5.70 m3 (7.46 yd3)

5.70 m3 (7.46 yd3)

6.00 m3 (7.85 yd3)

5.70 m3 (7.46 yd3)

4.40 m3 (5.75 yd3)

8.20 m3 (10.73 yd3)

5.70 m3 (7.46 yd3)

Material Density

GeneralPurpose

Rock

Coal

General Purpose/Heavy Duty

MaterialHandling

Stan

dard

Lin

kage

Pin

On

900 1000 1100 1200 1300 1400 1500 1600 1700 1800 1900 2000 2100 2200 2300 2400

1348

700



1517 1685 1854 2022 2191 2359 2528 2696 2865 3033 3202 3370 3539 3707 3876 4044



986H — Standard LiftMaterial Density Bucket Volume

kg/m3 tonnes/m3 lb/yd3 tons/yd3 m3 yd3

1632-1795 1.63-1.80 2750-3025 1.38-1.51 6.1 8

1740-1914 1.74-1.91 2933-3227 1.46-1.61 5.7 7.5

1865-2051 1.86-2.05 3143-3457 1.57-1.73 5.4 7

*Density range covers 100% rated payload to 110% rated payload in accordance with Large Wheel Loader payload policy.

23-286 Edition 44




23

Edition 44 23-287

Bucket Selection● 988K, 990H


988KMaterial Density Bucket Volume


1468-1614 1.47-1.61 2500-2750 1.25-1.38 7.7 10

1638-1801 1.64-1.80 2778-3056 1.39-1.53 6.9 9

1766-1942 1.77-1.94 3001-3300 1.50-1.65 6.4 8.33

990HMaterial Density Bucket Volume


1590-1749 1.59-1.75 2692-2962 1.35-1.48 10 13

1728-1901 1.73-1.90 2917-3208 1.46-1.60 9.2 12

1849-2034 1.85-2.03 3111-3422 1.56-1.71 8.6 11.25


992K — Standard Up to specified density for 100% fill factor

Bucket Volume Material Density

m3 yd3 kg/m3 lb/yd3

12.2 16 1780 3000

11.5 15 1890 3200

10.7 14 2030 3430

992K — High Lift Up to specified density for 100% fill factor


m3 yd3 kg/m3 lb/yd3

12.2 16 1560 2630

11.5 15 1560 2630

10.7 14 1560 2630

993K — Standard Up to specified density for 100% fill factor


m3 yd3 kg/m3 lb/yd3

15.3 20 1780 3000

14.5 19 1870 3160

13.8 18 1970 3330

993K — High Lift Up to specified density for 100% fill factor


m3 yd3 kg/m3 lb/yd3

14.5 19 1720 2890

13.8 18 1810 3060

13.0 17 1920 3240

23-288 Edition 44


Bucket Selection● 992K–993K


23

Edition 44 23-289



2.4 2.6 2.8 3.0 3.2 3.4 3.6 3.8 4.0 4.2 4.4

1.4 1.6 1.8 2.0 2.2 2.4 2.6

19

17

15

24.5

22.5

19.5


994HRated Payload 34 470 kg (76,000 lb)

BU

CK

ET

CA

PAC

ITY

yd3m3

kg/m3

lb/yd3

2.4 2.6 2.8 3.0 3.2 3.4 3.6 3.8 4.0 4.2 4.4

1.4 1.6 1.8 2.0 2.2 2.4 2.6

19

17

15

24.5

22.5

19.5


994H — High, Extended High LiftsRated Payload 30 840 kg (68,000 lb)

BU

CK

ET

CA

PAC

ITY

yd3m3

kg/m3

lb/yd3


110% 95%100%

Standard


NOTE: Machines equipped same as those on Performance Data pages.

3.1 (4.0)

3.3 (4.25)

2.5 (3.25)

2.0 (2.6)

1.8 (2.4)

1.6 (2.0)

1.4 (1.8)1.3 (1.7)1.2 (1.6)

1.0 (1.31)

A

2000

2500

3000

3500

4000

4500

5000

1200

1500

1800

2100

2400

2700

3000

BUCKET SELECTION BASED ON MATERIAL DENSITY

lb/yd3

kg/m3

MATERIAL DENSITY

m3 (yd3)

BUCKETCAPACITY

KEY

A — IT14G2

23-290 Edition 44


Bucket Selection● IT14G2


Edition 44 23-291


23

Travel Time — Loaded● 930K

● 20.5R-25 Tires

930K TRAVEL TIME — LOADED

DISTANCE ONE WAY

TIM

E (

MIN

)

Meters

PE

RC

EN

T G

RA

DE

DISTANCE ONE WAY

TIM

E (

MIN

)

Meters

PE

RC

EN

T G

RA

DE

Travel time assumes maximum governor pedal depression and automatic shifting in Range 4.

In load and carry applications it is important to consult the tire manufacturer on Ton-MPH ratings and pressure recommendations.


23-292 Edition 44


Travel Time — Empty● 930K● 20.5R-25 Tires

930K TRAVEL TIME — EMPTY

DISTANCE ONE WAY

TIM

E (

MIN

)

Meters

PE

RC

EN

T G

RA

DE

DISTANCE ONE WAY

TIM

E (

MIN

)

Meters

PE

RC

EN

T G

RA

DE




Edition 44 23-293


23

Travel Time — Loaded● 938K

● 20.5R-25 Tires


DISTANCE ONE WAY

TIM

E (

MIN

)

Meters

PE

RC

EN

T G

RA

DE

DISTANCE ONE WAY

TIM

E (

MIN

)

Meters

PE

RC

EN

T G

RA

DE




23-294 Edition 44


Travel Time — Empty● 938K● 20.5R-25 Tires


DISTANCE ONE WAY

TIM

E (

MIN

)

Meters

PE

RC

EN

T G

RA

DE

DISTANCE ONE WAY

TIM

E (

MIN

)

Meters

PE

RC

EN

T G

RA

DE




23

Edition 44 23-295

Travel Time — Loaded● 950K ● 950H● 23.5-R25 Tires


2%

4%6%

8%

10%

15%

20%

0

0.5

1

1.5

2

2.5

0 50 100 150 200 250


DISTANCE ONE WAY

TIM

E (

MIN

)

Meters

PE

RC

EN

T G

RA

DE

These machines meet U.S. EPA Tier 4 Interim/EU Stage IIIB emission standards and are only available in North America and Europe.Contact your local Cat dealer for product availability.

2%

4%6%

8%

10%

15%

20%

0

0.5

1

1.5

2

2.5

3

0 50 100 150 200 250

950H TRAVEL TIME — LOADED

DISTANCE ONE WAY

TIM

E (

MIN

)

Meters

PE

RC

EN

T G

RA

DE

Not available in all regions. Contact your local Cat dealer for product availability.

Curves assume use of highest operating speed attainable.In load-and-carry applications it is important to consult the tire manufacturer on load-speed ratings and pressure recommendations.


23-296 Edition 44


Travel Time — Empty● 950K ● 950H● 23.5-R25 Tires

2%4%

6%8%10%

15%

20%

0

0.5

1

1.5

2

0 50 100 150 200 250


DISTANCE ONE WAY

TIM

E (

MIN

)

Meters

PE

RC

EN

T G

RA

DE


2%4%

6%8%

10%

15%

20%

0

0.5

1

1.5

2

0 50 100 150 200 250

950H TRAVEL TIME — EMPTY

DISTANCE ONE WAY

TIM

E (

MIN

)

Meters

PE

RC

EN

T G

RA

DE




23

Edition 44 23-297



2%

4%6%

8%

10%

15%

20%

0

0.5

1

1.5

2

2.5

0 50 100 150 200 250


DISTANCE ONE WAY

TIM

E (

MIN

)

Meters

PE

RC

EN

T G

RA

DE


2%

4%6%

8%

10%

15%

20%

0

0.5

1

1.5

2

2.5

3

0 50 100 150 200 250


DISTANCE ONE WAY

TIM

E (

MIN

)

Meters

PE

RC

EN

T G

RA

DE




23-298 Edition 44



2%4%

6%8%10%

15%

20%

0

0.5

1

1.5

2

0 50 100 150 200 250


DISTANCE ONE WAY

TIM

E (

MIN

)

Meters

PE

RC

EN

T G

RA

DE


2%4%

6%8%10%

15%

20%

0

0.5

1

1.5

2

0 50 100 150 200 250


DISTANCE ONE WAY

TIM

E (

MIN

)

Meters

PE

RC

EN

T G

RA

DE




Edition 44 23-299


23

Travel Time — Loaded and Empty● 966M

● 26.5-R25 Tires

2%4%6%8%10%

15%

20%

0

0.5

1

1.5

2

0 50 100 150 200 250

966M TRAVEL TIME — LOADED

DISTANCE ONE WAY

TIM

E (

MIN

)

Meters

PE

RC

EN

T G

RA

DE

966M TRAVEL TIME — EMPTY

2%4%6%

8%10%

15%

20%

0

0.5

1

1.5

0 50 100 150 200 250

DISTANCE ONE WAY

TIM

E (

MIN

)

Meters

PE

RC

EN

T G

RA

DE

These machines meet U.S. EPA Tier 4 Final/EU Stage IV emission standards and are only available in North America and Europe.Contact your local Cat dealer for product availability.



23-300 Edition 44



2%

4%6%

8%

10%

15%

20%

0

0.5

1

1.5

2

2.5

0 50 100 150 200 250


DISTANCE ONE WAY

TIM

E (

MIN

)

Meters

PE

RC

EN

T G

RA

DE


2%

4%6%

8%

10%

15%

20%

0

0.5

1

1.5

2

2.5

0 50 100 150 200 250


DISTANCE ONE WAY

TIM

E (

MIN

)

Meters

PE

RC

EN

T G

RA

DE




23

Edition 44 23-301



2%4%

6%

8%10%

15%

20%

0

0.5

1

1.5

2

0 50 100 150 200 250


DISTANCE ONE WAY

TIM

E (

MIN

)

Meters

PE

RC

EN

T G

RA

DE


2%4%

6%8%10%

15%

20%

0

0.5

1

1.5

2

0 50 100 150 200 250


DISTANCE ONE WAY

TIM

E (

MIN

)

Meters

PE

RC

EN

T G

RA

DE




23-302 Edition 44


Travel Time — Loaded and Empty● 972M● 26.5-R25 Tires

2%4%6%8%10%

15%

20%

0

0.5

1

1.5

2

0 50 100 150 200 250

972M TRAVEL TIME — LOADED

DISTANCE ONE WAY

TIM

E (

MIN

)

Meters

PE

RC

EN

T G

RA

DE

972M TRAVEL TIME — EMPTY

2%4%6%

8%10%

15%

20%

0

0.5

1

1.5

0 50 100 150 200 250

DISTANCE ONE WAY

TIM

E (

MIN

)

Meters

PE

RC

EN

T G

RA

DE

These machines meet U.S. EPA Tier 4 Final/EU Stage IV emission standards and are only available in North America and Europe.Contact your local Cat dealer for product availability.



23

Edition 44 23-303



2%

4%6%

8%

10%

15%

20%

0

0.5

1

1.5

2

2.5

0 50 100 150 200 250


DISTANCE ONE WAY

TIM

E (

MIN

)

Meters

PE

RC

EN

T G

RA

DE


2%

4%6%

8%

10%

15%

20%

0

0.5

1

1.5

2

2.5

0 50 100 150 200 250


DISTANCE ONE WAY

TIM

E (

MIN

)

Meters

PE

RC

EN

T G

RA

DE




23-304 Edition 44



2%4%

6%8%10%

15%

20%

0

0.5

1

1.5

2

0 50 100 150 200 250


DISTANCE ONE WAY

TIM

E (

MIN

)

Meters

PE

RC

EN

T G

RA

DE


2%4%

6%

8%10%

15%

20%

0

0.5

1

1.5

2

0 50 100 150 200 250


DISTANCE ONE WAY

TIM

E (

MIN

)

Meters

PE

RC

EN

T G

RA

DE




23

Edition 44 23-305



2%

4%

6%

8%

10%

15%

20%

0

0.5

1

1.5

2

2.5

0 50 100 150 200 250

980K (NO LOCK-UP) TRAVEL TIME — LOADED

DISTANCE ONE WAY

TIM

E (

MIN

)

Meters

PE

RC

EN

T G

RA

DE


2%

4%

6%

8%

10%

15%

20%

0

0.5

1

1.5

2

2.5

0 50 100 150 200 250


DISTANCE ONE WAY

TIM

E (

MIN

)

Meters

PE

RC

EN

T G

RA

DE






23-306 Edition 44

2%4%

6%

8%10%

15%

20%

0

0.5

1

1.5

2

0 50 100 150 200 250

980K (NO LOCK-UP) TRAVEL TIME — EMPTY

DISTANCE ONE WAY

TIM

E (

MIN

)

Meters

PE

RC

EN

T G

RA

DE


2%4%

6%

8%10%

15%

20%

0

0.5

1

1.5

2

0 50 100 150 200 250


DISTANCE ONE WAY

TIM

E (

MIN

)

Meters

PE

RC

EN

T G

RA

DE




23

Travel Time — Lock-Up Clutch● 980K

● 29.5-R25 Tires


Edition 44 23-307

2%4%

6%8%10%

15%

20%

0

0.5

1

1.5

2

0 50 100 150 200 250

980K (LOCK-UP CLUTCH) TRAVEL TIME — LOADED

DISTANCE ONE WAY

TIM

E (

MIN

)

Meters

PE

RC

EN

T G

RA

DE


2%4%6%

8%

10%

15%

20%

0

0.5

1

1.5

0 50 100 150 200 250

980K (LOCK-UP CLUTCH) TRAVEL TIME — EMPTY

DISTANCE ONE WAY

TIM

E (

MIN

)

Meters

PE

RC

EN

T G

RA

DE




0 5 10 15 20 25 30 35 400

50

100

150

200

250

300

350

1F

2F

3F3F

4F

4F

2F


988K Rimpull-Speed-Gradeability● Lock-Up Clutch

23-308 Edition 44

988KR

IMP

ULL

GROUND SPEED

kN

km/h

Direct Drive


23

Edition 44 23-309

Travel Time — Loaded● 988K — Lock-Up Clutch

● 35/65-33 Tires



DIS

TAN

CE

TOTA

L R

ES

ISTA

NC

E(G

rad

e p

lus

Ro

llin

g)

0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1 1.1 1.2 1.3

700

600

500

400

300

200

100

0

2% 4% 6% 8% 10% 15%

20%

0

20

40

60

80

100

120

140

160

180

200

220

TIME

Minutes

Feet Meters

NOTE: Curves assume use of highest operating speed attainable: 4th gear for 2%-6% TR, 3rd gear for 8%-10% TR, 2nd gear for 15% and 20% TR.

In load-and-carry applications it is important to consult the tire manufacturer on Ton-MPH ratings and pressure recommendations.



Travel Time — Empty● 988K — Lock-Up Clutch● 35/65-33 Tires

23-310 Edition 44


DIS

TAN

CE

TOTA

L R

ES

ISTA

NC

E(G

rad

e p

lus

Ro

llin

g)

700

600

500

400

300

200

100

00 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1 1.1 1.2 1.3

0

20

40

60

80

100

120

140

160

180

200

2202% 4% 6% 8% 10% 15% 20%

TIME

Minutes

Feet Meters

NOTE: Curves assume use of highest operating speed attainable: 4th gear for 2%-8% TR, 3rd gear for 10%-15% TR, 2nd gear for 20% TR.



23

990H Rimpull-Speed-Gradeability Wheel LoadersIntegrated Toolcarriers

Edition 44 23-311

KEY

1 — 1st Gear2 — 2nd Gear3 — 3rd Gear

KEY

E — Empty 76 965 kg (169,677 lb)L — Loaded 91 934 kg (202,677 lb)

990HR

IMP

ULL

TOTA

L R

ES

ISTA

NC

E(G

rad

e p

lus

Ro

llin

g)

SPEED

0

10

20

30

40

50

60

70

80

90

100

110

120

130

0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

45

40

2

35

30

25

5

20

15

10

50

60

55

1

3

3L

2L

2

E L

0

5

10

15

20

25

30

35

40

45

50

55

60

0 2 4 6 8 10 12 14 16 18 20 22 24

kg x1000

lb x1000

Calculated Pull: Idle HydraulicsCurves Assume NO SLIP Conditions

km/h

mph


23-312 Edition 44


Travel Time — Loaded● 990H● 41.25/70-39 Tires


DIS

TAN

CE

ON

E W

AYD

ISTA

NC

E O

NE

WAY

TOTA

L R

ES

ISTA

NC

E(G

rad

e p

lus

Ro

llin

g)

700

600

500

400

300

200

100

00 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1 1.1 1.2 1.3

2% 4% 6% 8% 10%

15%

20%

0

20

40

60

80

100

120

140

160

180

200

220

100

75

50

25

0

30

25

20

15

10

5

00.050 0.1 0.15 0.2

4%2% 6% 8% 10%15%

20%

TIME

TIME

Minutes

Feet

Feet

Meters

Meters

NOTE: Curves assume use of highest operating speed attainable: 3rd gear for 2%-8% TR, 2nd gear for 10%-20% TR.


TOTA

L R

ES

ISTA

NC

E(G

rad

e p

lus

Ro

llin

g)

Minutes


23

Edition 44 23-313

Travel Time — Empty● 990H

● 41.25/70-39 Tires



DIS

TAN

CE

ON

E W

AYD

ISTA

NC

E O

NE

WAY

TOTA

L R

ES

ISTA

NC

E(G

rad

e p

lus

Ro

llin

g)

700

600

500

400

300

200

100

00 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1 1.1 1.2 1.3

2% 4% 6% 8% 10% 15%

20%

0

20

40

60

80

100

120

140

160

180

200

220

100

75

50

25

0

30

25

20

15

10

5

00.050 0.1 0.15 0.2

4%2% 6% 8% 10% 15%

20%

TIME

TIME

Minutes

Feet

Feet

Meters

Meters

NOTE: Curves assume use of highest operating speed attainable: 3rd gear for 2%-10% TR, 2nd gear for 15% and 20% TR.


TOTA

L R

ES

ISTA

NC

E(G

rad

e p

lus

Ro

llin

g)

Minutes



992K Rimpull-Speed-Gradeability● Standard Machine

23-314 Edition 44

KEY


KEY


992KR

IMP

ULL

TOTA

L R

ES

ISTA

NC

E %

(Gra

de

plu

s R

olli

ng

)

SPEED

0

20

40

60

80

100

120

140

0 2 4 6 8 10 12 14

45

40

2

35

30

25

5

20

15

10

50

60

55

1

3

2

0

5

10

15

20

25

30

35

40

45

50

55

60

65

0 2 4 6 8 10 12 14 16 18 20 22 24

E L

kg x1000

lb x1000


km/h

mph


23

Edition 44 23-315



KEY


KEY


992KR

IMP

ULL

TOTA

L R

ES

ISTA

NC

E %

(Gra

de

plu

s R

olli

ng

)

SPEED

lb


mph


23-316 Edition 44


Travel Time — Loaded● 992K● 45/65-45 Tires


DIS

TAN

CE

ON

E W

AYD

ISTA

NC

E O

NE

WAY

TOTA

L R

ES

ISTA

NC

E(G

rad

e p

lus

Ro

llin

g)

700

600

500

400

300

200

100

00 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1 1.1 1.2 1.3

2% 4% 6% 8% 10%

20%

15%

0

20

40

60

80

100

120

140

160

180

200

220

100

75

50

25

0

30

25

20

15

10

5

00.050 0.1 0.15 0.2

4%2% 6% 8% 10%

20%

15%

TIME

TIME

Minutes

Feet

Feet

Meters

Meters



TOTA

L R

ES

ISTA

NC

E(G

rad

e p

lus

Ro

llin

g)

Minutes


23

Edition 44 23-317

Travel Time — Empty● 992K

● 45/65-45 Tires



DIS

TAN

CE

ON

E W

AYD

ISTA

NC

E O

NE

WAY

TOTA

L R

ES

ISTA

NC

E(G

rad

e p

lus

Ro

llin

g)

700

600

500

400

300

200

100

00 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1 1.1 1.2 1.3

2% 4% 6% 8% 10%

20%

15%

0

20

40

60

80

100

120

140

160

180

200

220

100

75

50

25

0

30

25

20

15

10

5

00.050 0.1 0.15 0.2

4%2% 6% 8% 10% 15%

20%

TIME

TIME

Minutes

Feet

Feet

Meters

Meters



TOTA

L R

ES

ISTA

NC

E(G

rad

e p

lus

Ro

llin

g)

Minutes


23-318 Edition 44



KEY


KEY

E — EmptyL — Loaded

993K

RIM

PU

LL

TOTA

L R

ES

ISTA

NC

E %

(Gra

de

plu

s R

olli

ng

)

SPEED

kg x1000


km/h

E L


23

Edition 44 23-319



KEY


KEY

E — EmptyL — Loaded

993K

RIM

PU

LL

TOTA

L R

ES

ISTA

NC

E %

(Gra

de

plu

s R

olli

ng

)

SPEED

lb x1000


mph

E L


23-320 Edition 44


Travel Time — Empty● 993K — Lock-Up Clutch● Idle Hydraulics


DIS

TAN

CE

ON

E W

AY

TOTA

L R

ES

ISTA

NC

E(G

rad

e p

lus

Ro

llin

g)

2202% 6% 8%

4%10% 15%

180

200

120

140

160

20%

80

100

120

40

60

0

20

0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2 1.3

TIME

Minutes

Meters


23

Edition 44 23-321

Travel Time — Loaded● 993K — Lock-Up Clutch

● Idle Hydraulics



DIS

TAN

CE

ON

E W

AY

TOTA

L R

ES

ISTA

NC

E(G

rad

e p

lus

Ro

llin

g)

2202%

4%6% 8% 10%

180

200

140

16015%

100

120 20%

60

80

0

20

40

00.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2 1.3

TIME

Minutes

Meters


23-322 Edition 44


Travel Time — Empty● 993K — Standard● Idle Hydraulics


DIS

TAN

CE

ON

E W

AY

TOTA

L R

ES

ISTA

NC

E(G

rad

e p

lus

Ro

llin

g)

2204%2% 6% 8% 10%

180

20015%

120

140

160

20%

80

100

120

40

60

0

20

0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2 1.3

TIME

Minutes

Meters


23

Edition 44 23-323

Travel Time — Loaded● 993K — Standard

● Idle Hydraulics



DIS

TAN

CE

ON

E W

AY

TOTA

L R

ES

ISTA

NC

E(G

rad

e p

lus

Ro

llin

g)

2202% 4% 6% 8% 10%

180

200

140

160

15%

100

120 20%

60

80

0

20

40

0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2 1.3

TIME

Minutes

Meters


23-324 Edition 44


994H Rimpull-Speed-Gradeability

KEY


KEY


994HR

IMP

ULL

TOTA

L R

ES

ISTA

NC

E(G

rad

e p

lus

Ro

llin

g)

SPEED

0

20

40

60

80

100

120

140

160

180

200

220

0 2 4 6 8 10 12 14 16

45

40

2

35

30

25

5

20

15

10

50

1

3L

2L3

2

0 2 4 6 8 10 12 14 16 18 20 22 24

0

10

20

30

40

50

60

70

80

90

100

E L

kg x1000

lb x1000


km/h

mph


23

Travel Time — Loaded● 994H

● 50/80-57 Tires


Edition 44 23-325


DIS

TAN

CE

ON

E W

AYD

ISTA

NC

E O

NE

WAY

TOTA

L R

ES

ISTA

NC

E(G

rad

e p

lus

Ro

llin

g)

700

600

500

400

300

200

100

00 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1 1.1 1.2 1.3

2% 4% 6% 8% 10% 15%

20%

0

20

40

60

80

100

120

140

160

180

200

220

100

75

50

25

0

30

25

20

15

10

5

00.050 0.1 0.15 0.2

4%2% 6% 8% 10% 15%

20%

TIME

TIME

Minutes

Feet

Feet

Meters

Meters



TOTA

L R

ES

ISTA

NC

E(G

rad

e p

lus

Ro

llin

g)

Minutes


23-326 Edition 44


Travel Time — Empty● 994H● 50/80-57 Tires


DIS

TAN

CE

ON

E W

AY

TOTA

L R

ES

ISTA

NC

E(G

rad

e p

lus

Ro

llin

g)

700

600

500

400

300

200

100

00 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1 1.1 1.2 1.3

2% 4% 6% 8% 10% 15%20%

0

20

40

60

80

100

120

140

160

180

200

220

100

75

50

25

0

30

25

20

15

10

5

00.050 0.1 0.15 0.2

4%2% 6% 8% 10% 15% 20%

TIME

TIME

Minutes

Feet Meters



DIS

TAN

CE

ON

E W

AY

TOTAL RESISTANCE(Grade plus Rolling)

Feet Meters

Minutes


23

Edition 44 23-327

Travel Time — Loaded● 994H Steady State

● 50/80-57 Tires



DIS

TAN

CE

ON

E W

AYD

ISTA

NC

E O

NE

WAY

TOTA

L R

ES

ISTA

NC

E(G

rad

e p

lus

Ro

llin

g)

700

600

500

400

300

200

100

00 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1 1.1 1.2 1.3

2% 4% 6% 8% 10%

20%

15%

0

20

40

60

80

100

120

140

160

180

200

220

100

75

50

25

0

30

25

20

15

10

5

00.050 0.1 0.15 0.2

4%2% 6% 8% 10%

20%

15%

TIME

TIME

Minutes

Feet

Feet

Meters

Meters

NOTE: Curves assume use of highest operating speed attainable: 3rd gear for 2%-8% TR, 2nd gear for 10% and 15% TR, 1st gear for 20% TR.


TOTA

L R

ES

ISTA

NC

E(G

rad

e p

lus

Ro

llin

g)

Minutes


23-328 Edition 44


Travel Time — Empty● 994H Steady State● 50/80-57 Tires


DIS

TAN

CE

ON

E W

AYD

ISTA

NC

E O

NE

WAY

TOTA

L R

ES

ISTA

NC

E(G

rad

e p

lus

Ro

llin

g)

700

600

500

400

300

200

100

00 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1 1.1 1.2 1.3

2% 4% 6% 8% 10%

20%

15%

0

20

40

60

80

100

120

140

160

180

200

220

100

75

50

25

0

30

25

20

15

10

5

00.050 0.1 0.15 0.2

4%2% 6% 8% 10% 15%

20%

TIME

TIME

Minutes

Feet

Feet

Meters

Meters

NOTE: Curves assume use of highest operating speed attainable: 3rd gear for 2%-10% TR, 2nd gear for 15% TR, 1st gear for 20% TR.


TOTA

L R

ES

ISTA

NC

E(G

rad

e p

lus

Ro

llin

g)

Minutes


23

Edition 44 23-329

Production Estimating Table● m3 or yd3/60 min. hour


Bucket Size (m3 or yd3) 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 6.5 7.0 7.5 8.0 8.5 9.0 9.5 10.0

Cycle Time

Cycles Per Hr Unshaded area indicates average production.

0.35 171

0.40 150 150 225 330 375 450 525

0.45 133 135 200 268 332 400 466 530 600 665 730 800 865

0.50 120 120 180 240 300 360 420 480 540 600 660 720 780 840 900 960 1003 1080 1140 1200

0.55 109 109 164 218 272 328 382 436 490 545 600 655 705 765 820 870 925 980 1008 1090

0.60 100 100 150 200 250 300 350 400 450 500 550 600 650 700 750 800 850 900 950 1000

0.65 92 92 138 184 230 276 322 368 416 460 505 555 600 645 690 735 780 830 875 920

0.70 86 342 386 430 474 515 560 600 645 690 730 775 815 860

0.75 80 560 600 640 680 720 760 800

Bucket Size (m3 or yd3) 11.0 12.0 13.0 14.0 15.0 16.0 17.0 18.0 19.0 20.0 21.0 22.0 23.0 24.0 25.0 26.0

Cycle Time

Cycles Per Hr

Unshaded area indicates average production.0.35 171

0.40 150

0.45 133

0.50 120 1320 1440

0.55 109 1200 1310 1420 1520 1635 1740 1850 1960 2070 2180 2285 2395 2505 2615 2725 2830

0.60 100 1100 1200 1300 1400 1500 1600 1700 1800 1900 2000 2100 2200 2300 2400 2500 2600

0.65 92 1010 1105 1195 1285 1380 1470 1560 1655 1745 1840 1930 2020 2115 2205 2300 2390

0.70 86 945 1030 1120 1200 1290 1375 1460 1545 1630 1720 1805 1890 1975 2060 2150 2235

0.75 80 880 960 1040 1120 1200 1280 1360 1440 1520 1600 1680 1760 1840 1920 2000 2080

0.80 75 975 1050 1125 1200 1275 1350 1425 1500 1575 1650 1725 1800 1875 1950

Job Efficiency Worktime/Hr

Efficiency Factor Bucket Load Factor

60 Min Hr 100% Bucket Size × 1.00

55 91% 0.95

50 83% 0.90

45 75% 0.85

40 69% 0.80

— — 0.75


23-330 Edition 44


Production Estimating Table● 60 min hour ● Shot Rock● Metric Tons

Metric Tons ● 1600 kg Lm3 (1.6 t) density

Bucket Size m3 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 6.5 7.0 7.5 8.0 8.5 9.0 9.5

Cycle Time

Cycles Per Hr Unshaded area indicates average production.

0.40 150 240 360 480 600 720

0.45 133 213 319 426 532 638 745 851 958 1064 1170

0.50 120 192 288 384 480 576 672 768 864 960 1056 1152 1248 1344 1440 1536 1632 1730 1825

0.55 109 174 262 349 436 523 610 698 785 872 959 1046 1134 1221 1308 1395 1482 1570 1655

0.60 100 160 240 320 400 480 560 640 720 800 880 960 1040 1120 1200 1280 1360 1440 1520

0.65 92 147 221 294 368 442 515 589 662 736 810 883 957 1030 1104 1178 1251 1325 1400

0.70 86 482 550 619 688 757 826 894 963 1032 1101 1170 1238 1310

0.75 80 768 832 896 960 1024 1088 1150 1215

Bucket PayloadMetric (Tons) 1.6 2.4 3.2 4.0 4.8 5.6 6.4 7.2 8.0 8.8 9.6 10.4 11.2 12.0 12.8 13.6 14.4 15.2

Bucket Size m3 10.0 11.0 12.0 13.0 14.0 15.0 16.0 17.0 18.0 19.0 20.0

Cycle Time

Cycles Per Hr


0.45 133

0.50 120

0.55 109 1744 1918 2092 2267 2441 2616 2790 2964 3139 3313 3488

0.60 100 1600 1760 1920 2080 2240 2400 2560 2720 2880 3040 3200

0.65 92 1472 1619 1766 1913 2060 2208 2355 2502 2649 2796 2944

0.70 86 1376 1513 1651 1788 1926 2064 2201 2339 2476 2614 2752

0.75 80 1280 1408 1536 1664 1792 1920 2048 2176 2304 2432 2560

0.80 75 1200 1320 1440 1560 1680 1800 1920 2040 2160 2280 2400

Bucket Payload Metric (Tons) 16.0 17.6 19.2 20.8 22.4 24.0 25.6 27.2 28.8 30.4 32.0


23

Edition 44 23-331

Production Estimating Table● Shot Rock ● 60 min hour

● U.S. Tons


U.S. Tons ● 2700 lb/LCY (1.35 T) density

Bucket Size yd3 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 6.5 7.0 7.5 8.0 8.5 9.0 9.5 10.0

CycleTime

CyclesPer Hr Unshaded area indicates average production.

0.40 150 203 330 420 510 615 705 810

0.45 133 180 293 360 454 545 625 720 810 905 985 1080 1170

0.50 120 162 254 324 408 492 565 650 730 815 890 970 1060 1140 1200 1300 1380 1470 1540 1620

0.55 109 147 240 294 370 448 515 590 665 740 805 885 960 1030 1090 1180 1250 1330 1400 1740

0.60 100 135 220 270 340 410 470 540 610 680 740 810 880 950 1000 1080 1150 1220 1280 1350

0.65 92 124 200 250 314 380 435 500 560 625 680 750 810 875 920 985 1060 1120 1180 1250

0.70 86 525 585 635 695 755 815 860 930 990 1050 1100 1160

0.75 80 760 800 865 920 975 1030 1080

Bucket Payload (Tons) 1.35 2.2 2.7 3.4 4.1 4.7 5.4 6.1 6.8 7.4 8.1 8.8 9.5 10.0 10.8 11.5 12.2 12.8 13.5

Bucket Size yd3 11.0 12.0 13.0 14.0 15.0 16.0 17.0 18.0 19.0 20.0 21.0 22.0 23.0 24.0 25.0 26.0

Cycle Time

Cycles Per Hr


0.45 133

0.50 120 1782 1945

0.55 109 1620 1765 1905 2060 2200 2350 2495 2645 2790 2940 3080 3235 3375 3530 3670 3825

0.60 100 1485 1620 1750 1890 2020 2160 2290 2430 2560 2700 2830 2970 3100 3240 3370 3510

0.65 92 1365 1490 1610 1735 1855 1985 2105 2235 2355 2480 2600 2730 2850 2980 3100 3225

0.70 86 1275 1390 1505 1625 1735 1855 1965 2085 2200 2320 2430 2550 2665 2785 2895 3015

0.75 80 1190 1295 1400 1510 1615 1725 1830 1940 2045 2160 2260 2375 2480 2590 2695 2805

0.80 75 1310 1415 1515 1620 1715 1820 1920 2025 2120 2225 2325 2430 2525 2630

Bucket Payload (Tons) 14.9 16.4 17.5 18.9 20.2 21.6 22.9 24.3 25.6 27.0 28.3 29.7 31.0 32.4 33.7 35.1


23-332 Edition 44


Work Tools● Wheel Loaders

Work Tools 904H

908H

2, 9

07H

2, 9

06H

2

914G

2, IT

14G

2

910K

914K

924K

930K

938K

950K

, 962

K

950H

, 962

H

966H

, 966

K, 9

66M

, 972

H, 9

72K

, 972

M

980K

, 980

H

988K

988H

990H

992K

993K

994H

, 994

F

Fusion Quick Coupler X X X X X X

Quick Coupler X X X X X

Performance Series General Purpose Bucket

X X X X X X X X X X X

General Purpose Bucket X X X X X X X

Performance Series Material Handling Bucket

X X X X

Material Handling Bucket X X X X X X

Sand & Gravel Bucket X X X

Performance Series Coal Bucket X X X

Coal Bucket X X X X X X X X X X X

Performance Series Rock Bucket X X X X X X

Rock Bucket X X X X X X X X

Performance Series Heavy Duty Rock Bucket

X X X

Heavy Duty Rock Bucket X X X X

Performance Series Heavy Duty Granite Bucket

X X

Heavy Duty Granite Bucket X X X X

Heavy Abrasion Rock Bucket X X

Iron Ore Bucket X X X X

Serrated Edge Rock Bucket X X X X

Multi-purpose Bucket X X X X X X X X X X X

Side Dump Bucket X X X X X X X X X

High Dump Bucket X X X X X X

Grapple Bucket X X X X X X X X

Waste Handling Bucket X X X X X X X

Woodchip Bucket X X X X X X X X X X

Slag Bucket X X X X

Fertilizer Bucket X X X

Grading Bucket X X X

Light Material Bucket X X X X X X X X

NOTE: List is not all-inclusive. Contact your Cat dealer for special attachment needs.


Edition 44 23-333


23

Work Tools● Wheel Loaders

Work Tools 904H

908H

2, 9

07H

2, 9

06H

2

914G

2, IT

14G

2

910K

914K

924K

930K

938K

950K

, 962

K

950H

, 962

H

966H

, 966

K, 9

66M

, 972

H, 9

72K

, 972

M

980K

, 980

H

988K

988H

990H

992K

993K

994H

, 994

F

Pallet Fork X X X X X X X X X X X X X

Construction Fork X X X

Log & Lumber Fork X X X X X X X X X

Logging Fork X X X X X X

Millyard Fork X X X X X X

Unloading Grapple Fork X X X

Pipe & Pole Fork X X X X X

Asphalt Cutters X X

Auger X X

Blade X X

Angle Broom X X X X X X X X X X

Special Application Broom X X X X X X X X X X

Pickup Broom X X X X X X X X

Cold Planer X X

Compactors X X

Landscape Tillers X X

Material Handling Arm X X X X X X X X X X X X

Rake X X X X X X X X

Reversible Plow X X X X X X X X X X

V-plow X X X X X X X X

Snow Blower X X

Snow Push X X X X X X X

Stump Grinder X X

Trencher X X

Wheel Saw X

Block Handling Tools X X X

NOTE: List is not all-inclusive. Contact your Cat dealer for special attachment needs.


23-334 Edition 44


BUCKETSPerformance Series — optimized fill factors for use in truck loading, stockpiling and load-and-carry applications.General Purpose — provide good all-around performance for stockpiling, re-handling, excavating and bank loading.Material Handling — designed for efficient loading of stock piled materials.Coal — high-volume material movers, for loading and stock piling coal and other materials of similar density.

Rock — designed for high production in abrasive applications.Multi-Purpose — versatile … loads, strips topsoil, bull-dozes, clamps pipe, and cleans up debris, plus many other tasks.Side Dump — dump forward or to the left … ideal in tight quarters or to reduce turning time.High Dump — for extended dump height of light materials.Grapple — equipped with dual top clamps to grab and hold loose material.Waste Handling — move large volumes for low-density refuse in transfer stations, landfills and recycling yards.Woodchip — optimized for moving large volumes of wood chips.Slag — heavy duty and specifically constructed to handle extreme conditions that come with handling hot slag.

FORKSPallet — for a variety of task, tines are adjustable and available in several different lengths.Log & Lumber — flat tines and raised back are designed specifically for use in handling both unfinished logs and stack lumber. Available with top clamp.Logging — equipped with two independent top clamps, for use loading and unloading trucks and feeding the mill.Millyard — equipped with one-piece top clamp, built for moving, sorting and feeding the mill.Unloading Grapple — short tines and large top clamp opening ideal for unloading logs from trucks.Pipe & Pole — wide carriage, fixed tines and full width double-acting clamp are ideal for transporting, loading and unloading pipe.

AND MORE ...Brooms — for street or job site cleanup, snow removal etc. Angle, Special Application and Pick-up models available.Material Handling Arms — provides a tool that can pick, carry and load a variety of materials. Arm length can be adjusted.Plows — ideal for snow clearing, available in angling and V-plow styles.Rakes — versatile tools that work well in light-duty, medium-duty and heavy-duty land clearing situations. Available with top clamp.

Integrated Toolcarriers Work ToolsWork Tools IT14G2 910K 914KPerformance Series

General Purpose BucketX X

General Purpose Bucket X X XMaterial Handling Bucket X X XCoal BucketMulti-Purpose Bucket X XSide Dump Bucket X XHigh Dump BucketGrapple BucketWaste Handling BucketWoodchip BucketPallet Fork X X XLog & Lumber ForkLogging ForkMillyard ForkGrapple ForkAsphalt CutterStraight BladeAngle Blade X XAngle Broom X XSpecial Application BroomPick-up BroomMaterial Handling Arm X X XReversible PlowV-plowOne Way PlowRakeThis list not all inclusive. Contact your Cat dealer for special attachment needs.

Work Tools


23

Edition 44 23-335

Fusion Coupler System● NACD, LACD, EAME


FUSION COUPLER SYSTEMCaterpillar is breaking new ground with the Fusion

Coupler System. Caterpillar engineers designed this new system to exceed the performance of any other Cat or competitive coupler solution in the marketplace. This coupler system is a factory- or field-installed option for Cat Loaders from 924K through 972, including IT38 and IT62 machines. Fusion offers benefits in four main categories:

PerformanceThis new, patented interface provides coupler flexi-

bility with performance virtually identical to pin-on.Imagine lifting a hundred-pound box with your arms

fully extended. Now, imagine lifting that same load close to your body. That’s the genius of Fusion: designed to integrate the work tool and the machine by pulling the coupler and tool closer to the wheel loader. As a result, the center of gravity is moved inward, towards the machine. This translates to increased lifting ability when compared to machines equipped with competing coupler systems.

DurabilityThe advanced wedging mechanism of the Fusion

Coupler creates a tight, rattle-free fit. This new lock up system eliminates play and wear — resulting in a long service life.

Wedges pull the attachment tight to the machine in two directions — in and down. Constant hydraulic pres-sure on the coupler wedges compensate for wear, assur-ing a tight fit throughout the life of the coupler. Tight fit gives better tool control and increased productivity. Plus, coupler durability is substantially increased over tradi-tional couplers.

VisibilityA new, open coupler frame design opens sight lines

from the operator’s seat, making it easier than ever before to engage and disengage attachments with certainty.

Offset tines and other design changes to Fusion Pallet Forks, working in conjunction with the Fusion Coupler, increase visibility substantially at ground level and truck bed height when compared to tradi tional coupler and fork combinations.

Flexibility/CompatibilityWith the Fusion Coupler system, Caterpillar customers

get one common interface. This unique, single interface eliminates the need for many different couplers across the entire range of Cat Small and Medium Wheel Loaders. This expanded machine compatibility not only allows one machine to pick up a range of work tools, but also for one work tool to be used by a host of different machines. Realize the flexibility and opportunity afforded your rental operation, or the improvements to machine and work tool management on your customers’ job sites.

Fusion is supported by a full line of work tools. Just about any work tool available for pin-on is also available, or can be converted, to work with Fusion. For complete information on Fusion work tools available for Cat Loaders 924 through 972, consult Fusion Product Bulletin GEJQ0222.


Fusion Work Tools 924K

930K

938K

950K

, 962

K

950H

, 962

H

IT62

H/G

966K

/H

972K

/H

Performance Series General Purpose Bucket X X X X X X X

General Purpose Bucket X X X X X

Performance Series Material Handling Bucket X X X X X X

Material Handling Bucket X X X X X

Performance Series Coal Bucket X X

Coal/Light Material Bucket X X X X

Performance Series Rock Bucket X X X

Rock Bucket X X X X

Multi-purpose Bucket X X X X X

Side Dump Bucket X X X X X X X X

High Dump Bucket X X X X X X X X

Grapple Bucket X X X X X X X X

Waste Handling Bucket X X X X X X X X

Woodchip Bucket X X X X X X X X

Pallet Fork X X X X X X X X

Log & Lumber Fork X X X X X X X X

Logging Fork X

Millyard Fork X X X X

Grapple Fork X

Pipe & Pole Fork X X X X X X X

Angle Broom X X X X X

Special Application Broom X X X X X

Pickup Broom X X X

Material Handling Arm X X X X X X X X

Rake X X X X X X X X

Reversible Plow X X X X X X X X

V-plow X X X X

NOTE: This list is not all-inclusive. Contact your Cat dealer for special attachment needs.

23-336 Edition 44


Fusion Coupler System● Work Tools


wheel loaders integrated tool carriers - … loaders integrated tool carriers part b. 23-228 edition...

Documents