safop v4.0.pdf · e-mail: [email protected] |...

Wheel Lathes (775) 324-2577 (775) 786-6098 [email protected] www.westernsierras.com Underfloor Wheelset Lathe – UGL 30 Reprofile wheels and brakes on all types of rolling stock with or without disassembly from the vehicle. v4.0 Tandem Underfloor Lathes – UGLX 15 & 30 Two UGL lathes mounted to a common structure for simultaneous machining of four wheels on a bogie. SAFOP S.p.A. Via Castelfranco Veneto, 65 - Z.I. Comina 33170 Pordenone – ITALY Ph. +39.0434.378900 | Fax +39.0434.378980 E-mail: [email protected] | www.safop.com Underfloor Lathe for Urban Vehicles – UGL 15 For reprofiling wheels, flanges, and disc brakes of urban vehicles with or without disassembly.

Upload: phungthuan

Post on 03-Mar-2018

244 views

Category:

Documents

4 download

Report

Download

Embed Size (px):

TRANSCRIPT

Wheel Lathes

(775) 324-2577(775) [email protected]

Under�oor Wheelset Lathe – UGL 30Repro�le wheels and brakes on all types of rolling stock with or without disassembly from the vehicle.

v4.0

Tandem Under�oor Lathes – UGLX 15 & 30Two UGL lathes mounted to a common structure for simultaneous machining of four wheels on a bogie.

SAFOP S.p.A.Via Castelfranco Veneto, 65 - Z.I. Comina33170 Pordenone – ITALY Ph. +39.0434.378900 | Fax +39.0434.378980E-mail: [email protected] | www.safop.com

Under�oor Lathe for Urban Vehicles – UGL 15For repro�ling wheels, �anges, and disc brakes of urban vehicles with or without disassembly.

Wheel Lathes

(775) 324-2577(775) [email protected]

v4.0

Universal Floor-Mounted Wheelset LatheDesigned for machining wheels on wheelsets dismounted from their bogies.

SAFOP S.p.A.Via Castelfranco Veneto, 65 - Z.I. Comina33170 Pordenone – ITALY Ph. +39.0434.378900 | Fax +39.0434.378980E-mail: [email protected] | www.safop.com

Portal Lathe for Wheelset Maintenance – RD 2000High production precision maintenance of disassembled wheelsets. Enclosed in a sound dampening cabin

Disc Brake LatheDigitally controlled lathe speci�cally designed for disc brake facing.

The Use and Standardization of Barcodes in Railroad Wheel and Wheelset Manufacturing ARKANSAS INDUSTRIAL COMPUTING Tim Epperson WheelShopAutomation.com

The occurrence · Web viewBearings are replaced with wheelsets as per maintenance schedules for 375,000 km or if there is a defect wheelset. Bearings removed from defective wheelsets

ONLINE AUCTION - VIHN.netpmi.vihn.net/auction/Files/3_41895_Multi Location Online Only 12_12... · SAFOP TUB-MATIC MDL. 1200, 55.12" facing head, ... ONLINE BIDDING: YOU MUST REGISTER

Fault Detection of High-Speed Train Wheelset Bearing Based ...ResearchArticle Fault Detection of High-Speed Train Wheelset Bearing Based on Impulse-Envelope Manifold ZheZhuang,1 JianmingDing,1

Design of a Wheelset Drive - Semantic Scholar€¦ · Abstract — The paper describes trends in individual wheelset drive and drives of the independently rotating wheels of modern

Proposed Procedure for Determining Wheel and …ibls.org/files/Standards/Determining Wheel and Wheelset Dimensions.pdf · Proposed Procedure for Determining Wheel and Wheelset Dimensions

Methods of Simulation of Railway Wheelset Dynamics · PDF fileMethods of Simulation of Railway Wheelset Dynamics taking into ... accordance with the Craig-Bampton method (Craig and

Safety and Operability (SAFOP) Study Manual

BLASTING & PAINTING 24 HOUR EMERGENCY SERVICE...Safop Leonard 1500 Engine Lathe •65“ Swing •10’ Between Centers •Heavy Duty Capacity •0.002 Tolerance over 50” •Cylindrical

ROVAL ALLOY RIM WHEELSET OWNER’S GUIDE - … · ROVAL ALLOY RIM WHEELSET OWNER’S GUIDE ... For front and rear hub axle end cap removal, ... 17mm 1 2 3 • Pull cassette body off