wheel bearing filtration skid · wheel bearing filtration skid our wb-30 filtra-skid filter unit...
TRANSCRIPT
WHEEL BEARING FILTRATION SKIDOur WB-30 FILTRA-SKID filter unit is designed to reduce particulates from high viscous petroleum and synthetic fluids. It is simple, reliable and will remove particulates to target ISO levels of 18/15/11 or better*.
Portable or Stationary
Completely Automated
For High Viscosity Oilsto 130,000 cST
It is well known that particle contamination reduces the service life of
hydraulic and gearbox components. Some level of particle
contamination is always present in these oils, even in new fluid. The
level of contamination depends on the type of hydraulic system or
gearbox. If foreign materials enter your system, critical responses are
necessary to minimize the effects of destructive contaminants. Off-line
or Kidney-loop methods are one of the best methods to reduce the solid
contaminants. If the viscosity is very high, this can be handled by our
Filtra-skid WB30.
The oil is removed by a separate air-operated pump and drawn into the on-board reservoir. It is then heated slowly
with a low-watt density heater so the oil is never damaged by this heat source. Once it reaches a benchmark
temperature, the hydraulic pump begins to circulate the fluid until it reaches another benchmark temperature. This is
when the filtration begins. Using two layers of top quality, world-class absolute rated filtration, we can remove solid
particulate down to your desired ISO Cleanliness level within one to two hours. Oil is then ready to be returned to
your equipment cleaned of most destructive debris. Also available with Bay6 Magnetic Scrubber technology as a
pre-separator.
filt
ram
ax.c
om
1-888-924-6233
VANCOUVER • Prince George • Campbell River • Duncan • EDMONTON • Calgary • Saskatoon • WinnipegNorthern Ontario • Kitchner • TORONTO • MONTRÉAL • Québec • Chicoutimi • Sept-Îles • Halifax
Optional Equipment:
Particle counter can be included.Water sensor to show percent of saturation.Wheels to fit your shop requirements.Most voltage requirements can be met.Water removal is also available – ask for details.
»»»»»