wet abrasive blaster - red-d-arc · wet abrasive blasting works by mixing water and abrasive first,...
TRANSCRIPT
reddarc.com 1-866-733-3272
Specs
Dimensions 48”L x 26”W x 48”H
350 lbs. Dry \ 673lbs. Wet
100-400cfm (Hose & Nozzle Size Dependent on Air Supply)
50 Ft. Blast Hose Standard, Up to 200Ft. with Extension Hoses
100lbs (1+ hrs. Run Time)
Weight
Air Capacity
Pot Media Capacity
Hose Length
**Specifications subject to change without notice.
General
WHAT IS WET ABRASIVE BLASTING?Wet abrasive blasting works by mixing water and abrasive first, then using compressed air to propel the slurry against the surface. Unlike dry blasting, wet abrasive blasting substantially reduces media consumption up to
75% and eliminates dust by over 90% while still providing any profile and surface cleanliness required.
SIMPLY THE BEST IN WET ABRASIVE BLASTING With state of the art pneumatic controls, setup is simpler and faster than ever, even for the most novice
users! We’re talking start to blasting in 5 minutes or less! With blast pressures that range from 30 to 120psi, the CLEARblast 150 can tackle a large variety of jobs from soft fiberglass to tough coatings on steel. Its
compact and mobile, yet, has a 1HR runtime! All that and more make the CLEARblast 150 simply the BEST!
Wet Abrasive Blaster
5 Minute Setup | 1HR Runtime | Safe for the User
Less Containment | No Chemicals | No Electric
The most advanced, versatile, and user-friendly system on the market today
• Simple Pneumatic Controls• Digital Hour Meter• Online Training Videos• Powder Coated Steel Frame• Fork Pockets for Lifting
• Storage Lid & Water Hose• On-Board Water Tank• Run Flat Tires/Locking Casters• Centralized Hose Connections