west 13 2015

“The Nation’s Best Read Construction Newspaper… Founded 1957.”

® WesternEdition

$3.00

Hlavinka, JCB Partner Up,

Host Celebration...6

Storm Construction: From

Foreman to Owner...22

Inside

By Lori TobiasCEG CORRESPONDENT

Last month, after Memorial Dayweekend, floods left much of Houstonunderwater, crews went to work cleaningup as soon as they could safely do so.Even so, Gary Readore, chief of staff ofthe Houston Solid Waste ManagementDepartment, expected it would be nearlythe end of summer before the city wasback to normal.“I would think in about two months

everything should be looking prettygood,” Readore said. “Probably beforethat, but I don’t want to underestimate.I’m hearing reports we may have a prettyrainy summer, which could compoundmatters, generate more debris or slow usup. We just saw the start of hurricane sea-son. That’s another thing that is always inthe back of our minds.”As well it should be. Just weeks after

Houston began cleanup efforts, the cityposted a new warning of yet another trop-

Houston Begins Long Road to Storm Recovery

By Martha BellisleASSOCIATED PRESS

SEATTLE (AP) Seattle TunnelPartners finished disassembling Bertha,the world’s largest tunnel-boringmachine, recently and said the damagethe machine sustained when it brokedown in December 2013 was moreextensive than previously thought,which means they have to revise theirschedule for when they will resumedrilling.Also May 18, state transportation

officials released the findings of tworeports on the ground settlement near

the Seattle Tunnel Project. Both said theremoval of water near the repair pit thatwas dug to access Bertha was a factor,but so was natural settlement and theremoval of water for other constructionprojects.Building a 2-mi. (3.2 km) tunnel

under Seattle was the project of choiceto replace the Alaskan Way Viaduct,which was damaged in a 2001 earth-quake. Crews spent much of 2014 dig-ging the 120-ft. (36.5 m) deep access pitto reach the front of the machine so itcould be pulled out and repaired.Concerns about ground stability were

Big Bertha’s DamageGreater Than Thought

see BERTHA page 52

Ritchie Bros. Sets Colo.

Records...50

June 27, 2015 • Vol. IX • No.13 • 470 Maryland Drive • Ft. Washington, PA 19034 • 215/885-2900 • Toll Free 800-523-2200 • Fax 215/885-2910

www.constructionequipmentguide.com

Forty-six percent of highway contractors reported thatmotor vehicles had crashed into their construction workzones during the past year, according to the results of anew highway work zone study conducted by theAssociated General Contractors of America. Associationofficials urged summer travel motorists to stay alert whiledriving through work zones, noting that drivers and pas-sengers are more likely than highway workers to be hurtor killed in work zone accidents.“If the thought of saving someone else’s life isn’t

enough to get you to slow down, just remember that youand your passengers are more likely to suffer in a highwaywork zone crash than anyone else,” said Tom Foss, presi-dent of Brea, Calif.-based Griffith Company and the chair-man of the association’s Highway and TransportationDivision. “In most work zones, there just isn’t enough

AGC Calls for Work Zone SafetyMeasures Increase

see AGC page 52

Table of Contents................4

Attachments Section ..15-19

Truck & Trailer Section ..............................................30-31

Recycling Section ........35-42

Auctions Section ...................................................... 45-55

Business Calendar ............51

Advertisers Index..............54

After the first storm dumped 10 to 12 in.over parts of the city, crews waited forthe flood waters to abate, then went outon their regular trash pick-up routes. see FLOOD page 48

Published Nationally

• June 27, 2015 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • June 27, 2015 •

2012 Cat D6T XW, Stk#: 9833, EROPS, A/C, RearScreen, Angle Blade w/Hyd. Tilt, 1,641 hrs., 30"Pads, Allied W6G Winch s#AW6GE6F1714C71,14' 6" Wide ........................................$219,500

2003 JLG 400S, Stk#: 9652, 500 lbs., 40 ft.,4WD, 4,810 hrs., 12x16.5 Tires, 3 Cyl. DeutzEng ......................................................$19,500

2006 Lull 644E, Stk#: 9580, 6,000 lbs., 44 ft.,4,060 hrs., 4WD, 4WS, 48" Forks, 51" Frame,Aux. Hyd., Hyd. Self Leveling System, 13.00x24Foam Filled Tires, 4 Cyl. Cummins Eng$29,500

2013 Doosan LSC, Stk#: HR-225, 3,388 hrs., St.175x80R13 Tires, 3 Cyl. Kubota ............$5,500

2014 Fecon BH74SS, Stk#: 9608, 6,000 PSI, wt.2,441 lbs. ............................................$25,000

2006 Gradall 534D-10, 9649, 9,000 lbs., 45 ft.,4,766 hrs., 4WD, 72" Forks, 69" Frame, 14.00x24Foam Filled Tires, Hyd. Self Leveling System, 4Cyl. JD Eng ..........................................$38,500

2006 JLG G6-42A, Stk#: 9705, 6,000 lbs., 42 ft.,4WD, 4WS, 4,363 hrs., 48" Forks, 48" Tilt Frame,13.00x24 Foam Filled Tires, Hyd. Self LevelingSystem, 4 Cyl. JD Eng..........................$27,500

Cat PA56 E00100E, Stk#: 9202, Winch with fairleads for D6T........................................$16,500

2011 Kawasaki 4010, Stk#: 9807, OROPS, 639 hrs., 4WD, 23x11.00x10 Tires, Diesel Eng................................................................$6,500

2007 JLG 1930ES, Stk#: 9702, 500 lbs., 19 ft.Platform Height, 246 hrs., Electric Power ........................................................................$6,500

2015 Doosan DX225LX, Stk#: 9832, EROPS,A/C, CD&FM Stereo, (New) 12 hrs., 46" Bucket,Aux. Hyd., Doosan DL06 Eng., Back-up Camera..........................................................$146,500

Ripper for Dozer, Stk#: 299, S# 1EH02480 ....................................................................$9,500

2006 John Deere 650J LGP, Stk#: 9749,EROPS, A/C, FM Stereo, 6 Way Blade, 7,508hrs., 24" Pads, 10' 8" Wide...................$55,000

2011 Cat D6T XW, Stk#: 9775, EROPS, A/C, FMStereo, Sweeps, Rear Screen, S/U Tilt Blade, 5,175hrs., Dimond 80J Ripper S# 110243 ....$189,500

2012 John Deere 200D LC, Stk#: 9772, EROPS,A/C & Heat, 4,170 hrs., 48" Bucket w/ManualThumb, Aux. Hyd., 32" Pads, 6 Cyl. JD Eng ....................................................................$89,500

2005 Volvo G710B, Stk#: 9886, EROPS, A/C, FMStereo, 5,186 hrs., Ripper, 14 ft. M/B, 14.00x24Tires, 6 Cyl. Volvo Eng., 10' 5" Height..$76,500

2012 Cat D3K XL, Stk#: 9836, EROPS, A/C,Sweeps, 6 Way Blade, 2,409 hrs., W03 Rippers#JMJ01092, 16" Pads, 9' 6" Wide ......$82,500

2013 Cat 289C2, Stk#: 9769, EROPS, A/C, 1,129hrs., 80" Bucket, Aux. Hyd., 18" Rubber Tracks, 4Cyl. C3.4 Cat Eng ................................$52,500

2006 Lull 944E-42, Stk#: 9664, 9,000 lbs., 42ft., 3,948 hrs., 4WD, 4WS, 60" Forks, 72" TiltFrame, Hyd. Self Leveling System, 15.5x25Foam Filled Tires, 4 Cyl. Cummins Eng.$36,500

2007 Lull 1044C-54, Stk#: 9851, 10,000 lbs., 54 ft., 3,603 hrs., 4WD, 4WS, 48" Forks, 52" TiltFrame, 14.00x24 Foam Filled Tires, Hyd. SelfLeveling System, 4 Cyl. JD Eng. ..........$36,500

2012 John Deere 210G LC, Stk#: 9418, EROPS,A/C, FM Stereo, 2,879 hrs., 42" Bucket, 32" Pads,10' 6" Wide ............................................$129,500

2005 JLG 600SJ, Stk#: 9711, 500 lbs., 60 ft.,4WD, 4,175 hrs., 15x19.5 Tires, JIB, 4 Cyl.Duetz Eng. ............................................$29,500

2006 Skytrak 8042, Stk#: 9505, 8,000 lbs., 42ft., 3,717 hrs., 60" Forks, 60" Frame, Aux. Hyd.,13.00x24 Tires, Hyd. Self Leveling System, 4Cyl. Cummins Eng................................$36,500

2012 Volvo MLT135C, Stk#: 9831, OROPS, 814 hrs., 78" Bucket, Aux. Hyd., 17" RubberTracks, 4 Cyl. JCB Eng ........................$32,500

2013 Case SV185, Stk#: 9525, OROPS, 145hrs., 64" Bucket, Aux. Hyd., Hyd. Quick Coupler,4 Cyl. CNH Eng ....................................$34,500

2003 JLG 800AJ, Stk#: 9830, 500 lbs., 80 ft.,3,003 hrs., 4WD, 445/55D19.5 Foam FilledTires, 4 Cyl. Deutz Eng ........................$39,500

2013 John Deere 210G LC, Stk#: 9852, EROPS,A/C & Heat, FM Stereo, 2,963 hrs., 42" Bucketw/Manual Thumb, 32" Pads, 10' 6" Wide ......................................................................$129,500

2010 JLG T350, Stk#: 9841, 500 lbs., 35 ft., 94hrs., St215/75R14 Tires ......................$17,500

Kubota 3240, Stk#: 9875, 884 hrs., 4WD, 72"Front Bucket, 42/ 70x24 Rear Tires, 10x16.5Front Tires, 3 Cyl. Kubota Eng..............$18,500

2012 Cat 324EL, Stk#: 9893, EROPS, A/C, FMStereo, 2,713 hrs., 42" Quick Connect Bucket,Aux. Hyd., 32" Pads, C7.1 Acert Cat Eng., 11' 2"Wide ..................................................$139,500

2004 Skytrak 10054, Stk#: 9790, 10,000 lbs., 54ft., 3,695 hrs., 4WD, 4WS, 48" Forks, 72" Frame,Aux. Hyd., Front Stabilizers, 17.5x25 Foam FilledTires, Hyd. Self Leveling System, 4 Cyl. CumminsEng ..........................................................$42,500

2005 John Deere 310G , Stk#: 9868, Orops,4wd, 9,999 Hrs., 24 Bucket, Extendahoe, 2 StickControl, 12x16.5 Front Tires, 19.5lx24 RearTires., Drive: 4wd ................................$32,500

2005 JLG G10-55A, Stk#: 9630, 10,000 lbs., 55ft., 4WD, 4WS, 5,692 hrs., 48" Forks, 74" Frame,Aux. Hyd., 4 Cyl. JD Eng ......................$52,500

"In Business for over 33 Years"www.hendrixmachineryllc.com

1-936-327-5430 • Email: [email protected] Se HablaEspañol

2008 Ditch Witch RT40, Stk#: 9700, 980 hrs.,4WD, 64" Push Blade, 6" Trench, 3 Cyl. Diesel Eng............................................................$16,500

2006 Skytrak 6042, Stk#: 9266, 6,000 lbs., 42Ft., 2,320 hrs., 4WD, 4WS, 48" Forks, 48" Frame,Aux. Hyd., 13.00x24 Foam Filled Tires, Hyd. SelfLeveling System, 4 Cyl. Cummins Eng...$34,500

2006 Genie Z60-34, Stk#: 9684, 60 ft., 4WD,1,508 hrs., IN385/65D19.5 Tires, Tires, 4 Cyl.Perkins Diesel ......................................$38,500

OEM Tracks, Stk#: 9715, New Set of Tracks andRails. For Cat 315, 317, 318, 320, 322, E200BPC150,PC200, 220, 230, EC210, SK160, CX160,LX160 and others ..................................$7,500


Construction Equipment Guide Western Edition (ISSN 2330-9792) is published bi-weekly by Construction Equipment GuideLtd. Advertising and Editorial Offices are located at 470 Maryland Dr., Ft. Washington, PA 19034. Toll Free 800/523-2200 or Fax 215/885-2910. Annual Subscription Rate $65.00. Call for Canadian and foreign rates.

Periodicals postage paid at Ft. Washington, PA and at additional mailing offices. POSTMASTER: Send address changes toConstruction Equipment Guide Western Edition, 470 Maryland Dr, Ft. Washington, PA 19034.Contents Copyrighted ©2015, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S.Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (includingframing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, let-ters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subjectto Construction Equipment Guide's unrestricted right to edit and comment editorially. Contributor articles do not necessarilyreflect the policy or opinions of this publication.Call or write for advertising rates, publication schedule and media kit. The Construction Equipment Guide is not responsiblefor clerical or printer's errors, every care is taken to avoid mistakes. Photographs of equipment used in advertisementsare not necessarily actual photographs of the specific machine. Similar photographs are used occasionally and every effortis taken to depict the actual equipment advertised. The right is reserved to reject any advertising.

SPECIAL SECTION35 RECYCLING, CRUSHING AND SCREENING

Be sure to check out this special section! Keep up to date with the latest information on recycling, crushing and screening.

FEATURES6 HLAVINKA EQUIPMENT, JCB CELEBRATE GRAND

OPENING WITH RIBBON CUTTINGMore than 200 people attended the two-day event, which included a demo of two3CXECO loader/backhoes with JCB’s Larry Ashley presenting, opportunities for customers to do “hands-on” inspections of the equipment, tours of the facility, andof course, a performance by the world famous “Dancing Diggers.”

8 MBMA RECOGNIZES NCI FOR PERFORMANCE

IN SAFETYMetal Building Manufacturers Association (MBMA) recognized NCI BuildingSystem’s Houston manufacturing plant for achieving an incident rate equal to 50percent or below the industry average through the 2014 calendar year, a challenging statistic to attain for full-time manufacturing plants.

10 SPECIAL I-90 OVERPASS WILL HELP ANIMALS

CROSS SAFELYInterstate 90 is a lifeline for the Northwest, connecting people and economiesacross the Cascades and linking the region to the rest of the country.

22 STORM CO.: FROM FOREMAN TO OWNERStephen “Shorty” Wilson had spent the past 20 + years working as a foreman atMorgan Tools, a contractor that built locations for oil and gas industry in Artesia,N.M., when the company decided to close shop.

26 PUTZMEISTER AMERICA ANNOUNCES FREE

EXTENDED WARRANTY ON ALL MACK CHASSISIn addition to the standard warranty on both 11 and 13 L engines, the extendedwarranty offers additional coverage for a total of 60 months or 250,000 mi.under unlimited hours of operation.

26 ATLAS COPCO NAMES WENDY NESTER-SCHIAVO

WINNER OF ITS BASEBALL PRIZE PACKAGE

Atlas Copco held the promotion during the 2015 World of Asphalt tradeshow in

Baltimore, where attendees were invited to download the new Atlas Copco

Construction App for a chance to win a baseball package for two.

46 WSM AUCTIONEERS HOLDS MONTHLY PUBLIC

CONSIGNMENT SALE

WSM Auctioneers held its monthly public consignment auction on June 13, at its

facility on South 67th Ave. in Phoenix, Ariz.

49 IRONPLANET BOASTS MORE THAN $33M

IN EQUIPMENT SALES DURING MAY AUCTIONMore than 25,000 people attended the auctions online and onsite, buying more

than 2,750 lots of equipment for $33.7 million in gross merchandise value (GMV).

50 RITCHIE BROS. SELLS MORE THAN $40M AT

DENVER, COLO., SALE

The two-day unreserved public auction set multiple site records, including total

sales, online sales ($17 plus million), total number of buyers (1,000 plus),

number of online buyers (480 plus), number of sellers (410 plus) and number of

lots sold (2,400 plus).

EQUIPMENT35 IROCK Sidewinder Crushers

38 CATERPILLAR MD5150C Top Hammer Drill

DEPARTMENTS43 CLASSIFIEDS

45 COMING AUCTIONS

51 BUSINESS CALENDAR

WESTERN EDITIONCirculated Throughout • Alaska • Arizona • California • Colorado • Hawaii

• Idaho • Montana • New Mexico • Nevada • Oklahoma • Oregon • Texas • Utah • Washington • Wyoming

Founder, Publisher & CEO Edwin M. McKeon Sr.Western Publisher Edwin M. McKeon Jr.

Editor In Chief Craig Mongeau Associate Editor Christine Wolkin

Editorial Consultant Pete Sigmund Production Mgr. John Pinkerton

Controller Tom WeinmannCirculation Mgr. Cathy Printz

Main office 470 Maryland Drive Fort Washington, PA 19034 215/885-2900

Toll Free 800/523-2200 Fax 215/885-2910

Web site www.constructionequipmentguide.comEditorial e-mail [email protected]

Advertising e-mail [email protected]

For advertising rates: Contact Kent HogeboomNational Sales Manager315/866-1423

Toll Free 800/988-1203Fax 315/866-1379

e-mail [email protected]

Contact Dale Agnew• Colorado • Louisiana• Oklahoma • Texas

Toll Free 877/877-4997 Fax 972/695-6049


Contact Dennis Hogeboom• Arizona • California • Hawaii • Nevada • New Mexico • Utah 602/679-8759


Contact Patrick Kiel• Idaho • Montana • Oregon • Washington • Wyoming

Toll Free 866/413-4265Fax 952/353-2750


Mobile LinkedIn Facebook Twitter YouTube

To read these stories and many more, visit www.constructionequipmentguide.com

IN THIS ISSUE226 46

®


CaMehnDoug (888

aodday! us tlll us tCaan yer / BrMehn

96) 4(888 -25

ay!Gangeran 5325

B.Rww.Rwwww

moused.cB

m

raeblCe

Yth r 30u ongg oatiing

r!eaYYea

2008 Bomag BW124PDH-3: #92003,OROPS, 47” Padfoot Drum, 600 Hrs ..............................................................$26,500

2000 Bomag BW177DH-3: #81208,OROPS, 66” Smooth Drum, 1950 Hrs ............................................................$39,500

2003 Komatsu SK1020-5: #50216,OROPS, Susp Seat, Rear Lights, 600 Hrs........................................................$24,750

2006 Deere 310G: #81652, Cab/AC, 4x4,Aux Hyd, 1700 Hrs ......................$49,500

2007 Komatsu WA150-5: #82343,Cab/AC, GP Bkt, 17.5-25 Tires, 5350 Hrs ........................................................$74,500

1999 Komatsu WA250-3: #92201,Cab/AC, JRB QC/Bkt, 13,900 Hrs......................................................................$37,500

2011 Komatsu WA250PZ-6: #82398,Cab/AC, QC/Bkt, KOMTRAX, 3750 Hrs ............................................................$96,500

2012 Komatsu WA380-7: #92075,Cab/AC, QC/Bkt, LSD Axles, KOMTRAX,3000 Hrs ....................................$169,500

2002 Komatsu PC95R-2: #50051,Cab/Heat, 20” Tracks, Aux Hyd, Blade,1900 Hrs ......................................$69,500

2011 Komatsu PC138USLC-8: #82184,Cab/AC, Hyd Thumb, Blade, Roadliners,3100 Hrs ....................................$139,500

2006 Komatsu PC160LC-7: #82134,Cab/AC, Mech Thumb, Good Paint, 5850Hrs ................................................$84,500

2008 Komatsu PC220LC-8: #82213,Cab/AC, 31.5” Tracks, Hyd Thumb, 6400Hrs ..............................................$124,500

2007 Komatsu D51EX-22: #81954,Cab/AC, PAT Blade, KOMTRAX, 3200 Hrs......................................................$117,500

2007 Komatsu D61EX15: #80743,Cab/AC, PAT Blade, 24” Tracks, 4550 Hrs ......................................................$129,500

2008 Komatsu D65EX-15E0: #81933,Cab/AC, 24” Tracks, Ripper, 5600 Hrs............................................................$149,500

2003 Komatsu D65PX-15: #91584,OROPS, 36” Tracks, Drawbar, 7350 Hrs..........................................................$69,500


Bacon-Universal Company, Inc.www.baconuniversal.comHIHilo808-935-8595 • 800-352-3508Honolulu808-839-7202 • 800-352-3508Kailua-Kona808-326-1212 • 800-352-3508Kauai (Lihue)808-245-8472 • 800-352-3508Wailuku Maui808-244-9158 • 800-352-3508

Clairemont Equipment Co.www.clairemontequipment.comCAEscondido760-739-9100Fontana909-429-9100Imperial760-355-7700Indio760-863-5558San Diego858-278-8351

Craig Taylor Equipment Companywww.craigtaylorequipment.comAKAnchorage907-276-5050 • 800-279-5051Fairbanks907-452-1192 • 800-452-1192Soldotna907-262-5977 • 800-254-5977Wasilla907-376-3838 • 800-973-2607

Kirby-Smith Machinery Inc.www.kirby-smith.comOKOklahoma City405-495-7820 • 800-375-3339Tulsa918-438-1700 • 800-375-3733TXAbilene325-692-6334 • 877-577-5729Amarillo806-373-2826 • 800-283-1247Dallas214-371-7777 • 800-753-1247Ft. Worth817-378-0600 • 877-851-9977Lubbock806-745-2112 • 866-289-6087Odessa432-333-7000 • 877-794-1800

Power Motive Corporationwww.powermotivecorp.comCOColorado Springs719-576-5541Denver303-355-5900Durango970-259-0455 • 970-259-0456Grand Junction970-241-1550Milliken970-587-1188WYCheyenne307-634-5149

Every Komatsu Tier 4 construction machine comes standardwith Komatsu CARE complimentary factory scheduled maintenance for 2,000 hours or the first 3 years, plus 2 complimentary Komatsu Diesel Particulate Filter exchanges.With Komatsu CARE you can:

• Lower your cost of ownership• Increase equipment uptime and reliability• Protect the value of your Tier 4 capital investment

It’s just part of our Program designed to deliver complete service and support solutions to Komatsu customers.

To learn more about Komatsu CAREcontact your Komatsu distributor or scanthis QR code with your smart phone.

GO WITH KOMATSU... AND GET THE ONLY TIER 4 EQUIPMENT WITH COMPLIMENTARY MAINTENANCE BUILT RIGHT IN.

WEST KOMATSU DISTRIBUTORS

T M

s

W

8

8

8

H

W

8

8

W

8

B M

P

2

I

F

8

A

8

O

Hlavinka Equipment, JCB CelebrateGrand Opening With Ribbon Cutting

Hlavinka Equipment and JCB officially joined forces inDecember 2014, and on June 12 and 13, the Texas dealerheld a Grand Opening and Ribbon Cutting event at its loca-tion in Angleton, Texas. Vice President and General Manager Terry Hlavinka, with

help from the Angleton Chamber of Commerce, cut the rib-bon to get the event rolling. More than 200 people attended the two-day event, which

included a demo of two 3CXECO loader/backhoes withJCB’s Larry Ashley presenting, opportunities for customersto do “hands-on” inspections of the equipment, tours of thefacility, and of course, a performance by the world famous“Dancing Diggers.” Hlavinka and JCB personnel also wereavailable to answer questions throughout the event. Later inthe evening on the 12th, Hlavinka provided a delicious craw-fish boil with all the trimmings to approximately 150 atten-dees.For Terry Hlavinka, the decision to work with JCB proved

easy. “We looked at the JCB line and determined that the equip-

ment performed as promised and that it was, overall, simplythe kind of company with which we would want to be asso-ciated,” he said.The Hlavinka family is entering its fourth generation of

operating Hlavinka Equipment Co. “My grandfather, Joe Hlavinka Sr., immigrated to the

United States in 1905 from Czechoslovakia. In 1939, he pur-chased the International Harvester dealer for $18,500, found-ing what is now Hlavinka Equipment Co.,” said Hlavinka.

“My father, Joe Jr., and his brother, Bill, took over thereins after my grandfather passed on and I have assumedresponsibility now, even though my dad still has a steadyhand in the business at 80 years old,” he added, “The firstfourth-generation member, Byron Hlavinka, is active in thebusiness. Kenneth, my brother and partner, expects to add tothis legacy soon.“All the Hlavinka kids, boys and girls, work in the com-

pany in some fashion so they make their own determinationif this business is the desired career path. There are likelyeasier ways to make a living but we get to deal with the bestfolks on earth.”Hlavinka Equipment Co. consists of eight locations cov-

ering 30 counties from Corpus Christi, Texas, to theLouisiana border and employs 150 people. Hlavinka alsoopened the Victoria, Texas, facility for JCB earlier this year.

(This story also can be found on Construction EquipmentGuide’s Web site at www.constructionequipmentguide.com.)CEG

Terry Hlavinka cuts the ribbon. Behind (L-R) areAshley Wilcox, Susan Hlavinka, Joe Hlavinka andChad Elms.

Three of the four generations of Hlavinkas represent-ed (L-R) are Kyle, Patrick, Blake, Byron, Kenneth,Susan, Terry, Patty and Joe Jr. Hlavinka.

The Dancing Diggers perform duringHlavinkas’s grand opening.

Customers and employees alike enjoy 500 lbs. of crawfish andall the trimmings.


Komatsu Equipment Co.www.komatsueq.comNVElko775-753-7557North Las Vegas702-399-1004Sparks/Reno775-356-1334UTSt. George435-986-1000Pleasant Valley435-216-7777Salt Lake City801-972-3660 • 1-877-KomatsuSouth Jordan801-972-3660WYCasper307-682-1445Gillette307-682-1445Rock Springs307-686-1300

Modern Machinery, Inc.www.modernmachinery.comIDBoise208-336-8570 • 800-221-5211Pocatello208-233-5345 • 800-829-4450MTBillings406-252-2158 • 800-735-2589Kalispell406-755-5540 • 800-434-4190Missoula406-523-1100 • 800-332-1617OREugene541-688-7321 • 800-826-9811Portland971-222-1710 • 800-950-7779WAKent253-872-3500 • 800-669-2425Rochester360-273-4284 • 800-304-4421Spokane509-353-1654 • 800-541-0754

Road Machinery, LLCwww.roadmachinery.comAZGilbert480-545-2400Phoenix602-252-7121Prescott928-778.5621Tucson520-623-8681 • 800-989-8681CABakersfield661-695-4830Fremont510-659-1903Fresno916-350-0640Perris909-355-3600Redding530-229-3820Pico Rivera562-699-6767West Sacramento916-375-3540TXEl Paso915-872-1001NMAlbuquerque505-345-8383Farmington505-324-8601

Waukesha-PearceIndustries, Inc.www.wpi.comTXBeaumont/Port Arthur409-721-5305Buffalo903-322-7150Corpus Christi361-884-8275Edinburg956-386-0107Houston713-723-1050Kilgore903-984-2011Pflugerville512-251-0013San Antonio210-648-4444Tomball281-351-9016www.komatsuamerica.com/komatsu-care


SAVE TIME • SAVE MONEY • SAVE LABOR • SAVE OIL

• No tools required• No expensive

hardware needed• No more rags

stuffed into hoses• No more messy

plastic caps• The ultimate

contamination control tool• One hand installation• Eliminate hydraulic

oil spills & clean up• Quick installation

& ease of usage• Safe for personnel

& environment• Industry acclaimed• 100% Made in USA

For more information contact Mike Pearl at914.980.8890 or email mike @ flangelock.comwww.flangelock.com

FAST, ACCURATE and CONSISTENT!

Truck Mounted

800-843-8731 www.stoltzmfg.com

Accurately Spreads All Dry Binding Agents

Leader In Low-Dust Application ofSoil Stabilization Materials

8-27Tons

Available In Manual or Automatic Rate Control With The Stoltz Controller

Spread Rates Up To 120 lb/sq .yd.

`

Pull-Type

Custom Sizes

Metal Building ManufacturersAssociation (MBMA) recognized NCIBuilding System’s Houston manufacturingplant for achieving an incident rate equal to50 percent or below the industry averagethrough the 2014 calendar year, a challeng-ing statistic to attain for full-time manufac-turing plants. For the past nine years, theHouston facility (7301 Fairview Street,Houston, TX 77041) has been acknowl-edged by the MBMA for its unwaveringcommitment to safety. “The management and employees at our

Houston plant consistently exceed safetyexpectations, and we are thrilled to see themrecognized for their accomplishments,” saidCarlin Mueller, vice president of manufac-turing at NCI Building Systems. “We are always grateful when our

employees are recognized by MBMA fortheir performance in safety, as we regardtheir safety awards with the highest esteem.”“A total of 46 plant facilities participated

in MBMA’s Quarterly OSHA Injury

Statistics Program,” said Dan Walker, assis-tant general manager of MBMA. “Awardswere presented for a plant’s performancethroughout 2014, based on MBMA’s analy-sis of the submitted data, which is directlycompared to the OSHA industry average.”

(This story also can be found onConstruction Equipment Guide’s Web site atwww.constructionequipmentguide.com.)

“A total of 46 plant facilities participated in MBMA’s Quarterly

OSHA Injury Statistics Program.”

Dan WalkerMBMA

OSHA Injury Statistics Program...

MBMA Recognizes NCIfor Performance in Safety


ARIZONA

Bejac Corporationwww.bejac.comPHOENIX(800) 77-BEJAC

CALIFORNIA

Bejac Corporationwww.bejac.comPLACENTIA(800) 77-BEJAC

SACRAMENTO(800) 77-BEJAC

REDDING(800) 77-BEJAC

IDAHO

Central Equipment Companywww.centralequipmentidahosales.comPOCATELLO(208) 233-2850(888) 617-2815

MONTANAWestate Machinerywww.westate.comBILLINGS406-373-6010 (800) 999-6676

NEVADALiebherr Mining Equipmentwww.liebherr.usELKO(775) 738-7386

Bejac CorporationRENO(800) 77-BEJAC

TEXAS

Nueces Power Equipmentwww.nuecespower.comCORPUS CHRISTI(361) 289-0066

VICTORIA(361) 576-0066

LAREDO(956) 725-0066

SAN BENITO (956) 361-0066

Bane Machineryhttp://www.banemachinery.com/DALLAS(214) 352-2468(800) 594-BANE

WYOMING

Liebherr Mining Equipmentwww.liebherr.usGILLETE(307) 686-0948

SAN FRANCISCO (800) 77-BEJAC

FRESNO(800) 77-BEJAC

SAN DIEGO(800) 77-BEJAC

EDINBURG(956) 702-0066

EL PASO(915) 541-0066

SAN ANTONIO(210) 310-0066

HOUSTON(713) 247-0066

JEROME(208) 324-8515

Liebherr has been precision-engineering effi cient technologies for decades, and our LH 40 material handler is no exception. It features an energy recovery cylinder that reduces fuel consumption by up to 25 percent and promotes faster cycles for greater handling capacity. And our handlers are industry-proven to deliver long life. We know material handling and we have a long history of developing specialized attachments, booms and sticks for this industry.

We haven’t compromised on anything; why should you?

liebherr.com

Handle More.


By Sandi DoughtonTHE SEATTLE TIMES

SEATTLE (AP) Interstate 90 isa lifeline for the Northwest, con-necting people and economiesacross the Cascades and linking theregion to the rest of the country. For wildlife, though, it’s a killer

— and not just because many ofthem wind up squashed. Multiplelanes of pavement and high-speedtraffic bisect habitat more ruthless-ly than any fence, isolating popula-tions and undermining the geneticvigor that’s key to long-term sur-vival. But part of that barrier is now

being lifted.On June 9, the state Department

of Transportation broke groundeast of Snoqualmie Pass on thestate’s first freeway overpass foranimals. The 150-ft. (45.7 m) longstructure is designed to providesafe passage for species rangingfrom black bear and cougar to deer,elk — and even squirrels, mice andlizards. It’s part of an ambitious project

to convert a 15-mi. (24 km) stretchof interstate into one of the world’smost wildlife-friendly highways. “This is really a remarkable

effort,’’ said Patricia Garvey-Darda, a biologist of theOkanogan-Wenatchee NationalForest. “The goal is to connect allthe species and all the habitat.’’ When finished, the section of I-

90 from Hyak to Easton will incor-porate more than 20 major under-passes and overpasses engineeredpartly or wholly with wildlife inmind. Dozens of small culvertsalso will be rebuilt to allow easierpassage. Four new underpasses are

already open, and cameras are cap-turing images of deer, ducks, coy-otes and river otters movingthrough. “We think this is going to make

a lot of difference for wildlife,’’said WSDOT project managerBrian White. The wildlife structures are being

piggybacked on a nearly $1 billionproject to widen I-90 from fourlanes to six, straighten curves,reduce avalanche hazards and gen-erally improve driving conditionson one of the nation’s busiestmountain highways. Some 28,000cars traverse Snoqualmie Pass on

an average weekday, and the num-ber can more than double on sunnyweekends. Except for reducing collisions

with vehicles, animals weren’tespecially high on WSDOT’s pri-ority list when the agency startedplanning the expansion more than10 years ago. But restoring con-nections between wildlife popula-tions in the North and SouthCascades is a long-term goal forthe U.S. Forest Service, whichowns the right of way. The area also is of keen interest

to conservation groups that toiledfor decades to eliminate a historiccheckerboard pattern of timberownership and bring almost100,000 acres back into federalmanagement. “I-90 has a tremendous impact

on wildlife in the Cascades,’’ saidJen Watkins, of ConservationNorthwest and the I-90 WildlifeBridges Coalition. “Animals fun-damentally require the ability tomove on the landscape, and if weprevent them from doing that wecan block their ability to find foodand mates and new habitat whenconditions change.’’

An Interstate RunsThrough It

Vast swaths of federal land arethe main reason Washington isblessed with such robust wildlifepopulations, Garvey-Darda point-ed out. “It’s contiguous forest onboth sides of the Cascade crest allthe way from the Canadian borderdown to Oregon.’’ But I-90 slicesthrough the heart of that forest. That can cause problems, espe-

cially for big predators like cougarsand bears, that require expansiveterritories. It also can hinder recov-ery of rare species like wolverinesand pine martens, for whom matesare already in short supply. And forall species, isolation can reduce thegenetic diversity that helps popula-tions survive disease outbreaks,shifting climate and other environ-mental turmoil. Though the genetic well-being

of bobcats or tailed frogs isn’tWSDOT’s mandate, it was clearthat the I-90 project wouldn’t hap-pen unless the Forest Service andconservation community were onboard, White said. With all those players at the

table, there was some head-butting

between engineers accustomed toprecision and biologists focused onanimal behavior and herd dynam-ics. But WSDOT quickly morphedfrom a reluctant partner to anenthusiastic supporter of thewildlife projects, Garvey-Dardasaid. “We had to learn from them,and they had to learn from us.’’ From an engineering standpoint,

it wasn’t that tricky to lengthenbridges to create expansive under-crossings and enable streams andwetlands to meander naturally,White said. The old bridge at Gold Creek,

near milepost 55, was only 150 ft.(45.7 m) long and surrounded byembankments that few animalscould navigate. The new version,which was finished last year,includes a 1,100-ft. (335 m) spanthat allows the creek to flow freelyunderneath and provide upstreampassage for fish, like bull trout. Theexpansive opening also preserveswetlands and opens up a naturalflood plain for Keechelus Lake. Aseparate undercrossing providesyear-round passage for land ani-mals, even when the lake is high. Gold Creek and other under-

passes will all be planted withnative vegetation, to blend seam-lessly with the surrounding envi-ronment. Tangles of wood andpiles of rock scattered under theGold Creek bridges serve asavenues and hiding places forsmall creatures, like pikas, voles,shrews and snakes.

Successful Models Tweaking bridges to accommo-

date wildlife may not be much of astretch for a transportation agency,but building overpasses strictly forwildlife is unprecedented inWashington. Plans call for at leasttwo and perhaps more, if funding

allows. The first will be located at Price

Creek, just east of Keechelus Dam.The site was picked based ontopography and monitoring thatfound the area is a natural wildlifecorridor. Scheduled to open in 2019, the

$6.2 million overpass also will beplanted with native vegetation.Ideally, animals will stroll acrossundeterred by cars and trucks zip-ping past under their feet, Whitesaid. Similar structures are working

well on U.S. 93 through theFlathead Indian Reservation inMontana, where 30 species havebeen documented making morethan 20,000 transits a year. The world’s most extensive net-

work of wildlife crossings is on theTrans-Canada Highway in BanffNational Park, said Mike Sawaya,a biological consultant who hasstudied wildlife movements at sev-eral projects. Vehicles there used toslam into deer, elk and moose sofrequently that the highway wascalled the “meat maker.’’ With acombination of fencing and 44crossing structures, the collisionrate dropped more than 80 percent. Sawaya and others found that it

can take several years for somespecies, like bears, to get accus-tomed to using underpasses andoverpasses. But once they do, hefound that up to 20 percent of bearsliving around the roadway usethem. In one experiment, Sawayastrung single strands of barbedwire near the crossings to snag hairfrom grizzlies and black bears forDNA analysis. He discovered thatmany of the bears that crossed theroad also bred once they got to theother side — thus boosting geneticdiversity.

Possible Savings Marcel Huijser of the Western

Transportation Institute atMontana State University, has ana-lyzed wildlife-crossing structuresaround the world, from elevatedrope bridges for dormice in theU.K. to culverts in Brazil designedto keep 100-lb. rodents calledcapybara off the road. Cost isalways an issue, he said. But on roadways with a high

rate of vehicle-wildlife collisions,he found that some types of cross-ing structures can actually result insavings, compared to the expenseof vehicle damage and humaninjury. It’s not clear how that cost-ben-

efit equation works out for I-90,with an average of four to five seri-ous vehicle-animal collisions ayear in the project area. It’s alsohard to estimate how much thewildlife crossings add to the totalcost, since all the bridges and cul-verts had to be replaced anyway,White said. The price tag for the first 7 mi.

(11 km) is $551 million, fundedthrough a gas tax imposed by theLegislature in 2005. WSDOT esti-mates it will cost an additional$390 million, which hasn’t beenbudgeted yet, to complete the final8 mi. (12.8 km). On the wildlife side of the

ledger, researchers from CentralWashington University have beenmonitoring creatures great andsmall along the corridor for severalyears. The goal is to gather base-line data before construction, thenquantify the impact of the crossingstructures, which also are moni-tored via camera. It’s early days, but the signs are

promising, said CWU graduatestudent David Reavill, who’stracking and tagging frogs andsalamanders. Individual amphib-ians may not travel far in their life-times compared to elk or cougars,but that doesn’t mean they won’tmake use of the crossings, he said. At Rocky Run Creek, where an

impassable culvert was torn outand the streambed restored, sala-manders have already taken up res-idence across the entire area.

(This story also can be found onConstruction Equipment Guide’sWeb site at www.constructionequip-mentguide.com.)

“This is really a remarkable effort. Thegoal is to connect all the species and allthe habitat.’’

Patricia Garvey-DardaOkanogan-Wenatchee National Forest

Special I-90 Overpass Will Help Animals Cross Safely


We make one of the broadest lines of construction, mining, road

building and material handling equipment in the world. All

backed by top-notch warranty, training, parts and service

support. Contact your local dealer today for more information...

T O U G H W O R L D . T O U G H E Q U I P M E N T.www.liugongna.com

Dearler 1Houston, TX

p. (555) 555 - 5555www.dealersite.com

Dealer 2Austin, TX


Dealer 3Dallas, TX


Dealer 4San Antonio, TX


EVERY JOB.EVERYWHERE.

Noble Equipment

505 Rankin Road • Houston, TX 77073

281-443-7667 • Fax 281-443-7886

www.nobleiron.com

Westrax Machinery

www.westraxmachinery.net

19618 South Susana RoadRancho Dominguez, CA 90220

310-605-2900 • Fax: 310-631-2775

19885 Temescal Canyon RoadCorona, CA 92881

951-732-6781


Allis Chalmers Forty-Five Motor Grader, 1:50 Scale..................$115

Allis Chalmers TS-300 Motor Scraper, 1:50 Scale......................$115

Bobcat E55 Compact Excavator, 1:25 Scale ................................$60

Bobcat S570 Skid Steer Loader, 1:25 Scale ..................................$65

Bobcat T550 Track Loader, 1:25 Scale............................................$70

Bobcat 225 Compact Excavator, 1:25 Scale..................................$50

Case 580C Backhoe/Loader (NZG), scale 1:35 ............................$90

Case 1102 Vibromax Roller, 1:35 Scale ..........................................$75

Case CX210C Excavator, 1:50 Scale ..............................................$50

Case CX250C Excavator, 1:50 Scale ............................................$185

Caterpillar 16G Motor Grader (NZG), 1:50 Scale ........................$145

Caterpillar 140H Motor Grader, scale 1:50......................................$75

Caterpillar 325L Excavator (NZG), 1:50 Scale ............................$165

Caterpillar 340D L Excavator, 1:50 Scale ....................................$170

Caterpillar 365B L Series II Excavator, 1:50 Scale ......................$115

Caterpillar 428 Backhoe w/Hammer, 1:50 Scale ..........................$70

Caterpillar 988K Wheel Loader, 1:50 Scale..................................$140

Caterpillar CT660 Day Cab Tractor w/Trail King Lowboy Trailer,

1:50 Scale ..........................................................................................$110

Caterpillar D6K XL Track-Type Tractor, scale 1:50........................$65

Caterpillar D6R Track-Type Tractor, scale 1:50..............................$90

Caterpillar D7E Track-Type Tractor, 1:50 Scale ............................$85

Caterpillar D10N Track-Type Tractor, 1:50 Scale ..........................$50

Caterpillar D10 Track-Type Tractor (Conrad), 1:50 Scale ..........$185

Caterpillar D11N Track-Type Tractor (Conrad), 1:50 Scale........$185

Caterpillar D11R Track-Type Tractor, 1:50 Scale ........................$100

Caterpillar D250E Articulated Truck (NZG), scale 1:50 ............$125

Caterpillar 302.5 Mini-Excavator, scale 1:32 ..................................$60

Caterpillar MH3049 Material Handler w/magnet, 1:50 Scale ....$150

Caterpillar 428B Backhoe/Loader(NZG), 1:50 Scale ....................$75

Caterpillar 428C Backhoe/Loader (NZG), 1:50 Scale ..................$75

Caterpillar 438C Backhoe/Loader (NZG), scale 1:50..................$135

Caterpillar PR-450 Pavement Profiler (NZG), scale 1:50 ..........$135

Caterpillar 631E Motor Scraper, scale 1:50....................................$60

Caterpillar 920 Wheel Loader (Conrad), scale 1:50....................$120

Caterpillar 966E Wheel Loader (NZG), scale 1:50 ......................$120

Caterpillar 980G Military Wheel Loader, 1:50 Scale ....................$60

Caterpillar 988B Wheel Loader, scale 1:50 ....................................$60

Caterpillar 988F Wheel Loader (NZG), scale 1:50 ......................$115

Caterpillar 988K w/ Grapple, 1:50 Scale ......................................$160

Caterpillar 994 Wheel Loader, 1:50 Scale ....................................$215

Caterpillar 5080 Front Shovel, 1:50 Scale ......................................$70

Demag Tracked Paver (NZG), 1:50 Scale ......................................$75

Dynapac SD2500 CS Road Paver, 1:50 Scale ............................$150

Grove TM1500 White 6 Axle Crane, 1:50 Scale ..........................$140

Hamm 3414 Pad Foot Compactor, 1:50 Scale ..............................$90

Hyundai 210LC-9 Excavator, 1:40 Scale ......................................$100

International 175 Crawler w/Demo Bucket, 1:25 Scale..............$150

International 350 PayHauler, scale 1:25........................................$260

International 560 PayLoader, 1:25 Scale ......................................$140

John Deere 315SJ Backhoe/Loader, 1:50 Scale ..........................$40

John Deere 420 Dozer, 1:16 Scale ..................................................$60

John Deere 470G LC Excavator, 1:50 Scale ..................................$85

John Deere 624J Military Wheel Loader, 1:50 Scale....................$40

John Deere 850K Dozer, 1:50 Scale ................................................$65

Komatsu CK25 Compact Track Loader, 1:50 Scale ....................$45

Komatsu D51 EX Dozer, 1:50 Scale ................................................$85

Komatsu D51PXi-22 Dozer, 1:50 Scale ..........................................$90

Komatsu D65 EX-17 Dozer w/Ripper, 1:50 Scale..........................$80

Komatsu D155AX Dozer w/ripper, 1:50 Scale ..............................$95

Komatsu D375A Dozer, 1:50 Scale................................................$125

Komatsu GD655 Motor Grader, 1:50 Scale....................................$90

Komatsu HM400-3 Articulated Truck, 1:50 Scale ......................$100

Komatsu PC200-8 Excavator, 1:50 Scale ....................................$135

Komatsu WA500 Wheel Loader, 1:50 Scale ..................................$75

Komatsu WB146 Backhoe/Loader, 1:50 Scale..............................$75

Komatsu WH613 Telehandler, 1:50 Scale ......................................$65

Komatsu Kenworth T880 w/Tri-Axle Lowboy, 1:50 Scale ........$135

Liebherr 1050-3.1 Mobile Crane, 1:50 Scale ................................$175

Link Belt 250 X3 Excavator, 1:50 Scale ........................................$160

Link Belt S-90 Excavator, 1:40 Scale ............................................$110

O&K RH9 Excavator, 1:50 Scale ......................................................$85

Terex 33-07 Off-Highway Truck (NZG), 1:40 Scale........................$90

Vogele 1900-2 Road Paver, 1:50 Scale ........................................$140

Vogele 2100-3 Road Paver, 1:50 Scale ........................................$145

Volvo L220G Wheel Loader, 1:50 Scale........................................$120

Volvo EC460CL Excavator, 1:50 Scale ........................................$200

Wirtgen 100F Tracked Cold Milling Machine, 1:50 Scale ..........$120

Wirtgen SP15 Slipform Paver, 1:50 Scale ....................................$110

Shipping and Handling Included

Contact – Barry McKeon800-523-2200 Ext. 197 • 610-506-5961 Cell

Email – [email protected]

CEG Scale Models470 Maryland Drive

Fort Washington, PA 19034Visit our Ebay Store – bmckeon collectibles – for a complete list with pictures.

Toys For Boys(and also men)Realistic Scale Models of Construction Equipment, ideal gifts for the Holidays, Birthdays, Graduation, etc.

Case 580 Super N WT Backhoe/Loader, 1:50 Scale - $60

Komatsu D475A Dozer, 1:50 Scale - $125

International 175 Crawler Loader, w/4in1 bucket,1:50 scale - $60

Barber-Greene BG245C Tracked Paver, (NZG),1:50 scale - $200


HYDRAULIC TRACK INSTALLATION KIT

SOLID ALLOY WHEELS

www.bairproducts.com Email: [email protected]

913-947-3934 (LUGS) 855-575-5847 TOLL FREE

- Parts Can Be Installed W/ Factory Parts - - Installation Videos On YouTube -

Got Lugs?

BOLT-ON REPLACEMENT TRACK DRIVE LUGS

STOP TRACK DERAILMENTS ON COMPACT TRACK LOADERS

BOGIE REPLACEMENT WHEELS

913-947-3934 (LUGS)855-575-5847 TOLL FREE

(LUGS)

EV / TST / AAAT / AC

TOLL FREE

- Parts Can Be Installed W/ Factory Parts - ideos On Y- Installation V Videos On Y

Bair’s AxleFactory

.bairpr

STRAX P PAERE

wwwEmail: info@bairpr

- Parts Can Be Installed W/ Factory Parts - ube - ouTTube - s On Y YouT

Bair’s Axle

oducts.com .bairproducts.comEmail: info@bairpr

CAT 277 & 287 D SeriesTEREX/ASV SR & PT 75 / 80 / 100G / 110

TENEMCALP REEIGOBSLEEHW

Y WOLLD AILOS

TEREX/ASV SR & PT 75 / 80 / 100G / 110

SLEEH -T-LOB

AGG/FARM Lugs Available for h ll J h D S d d

Go ot ot Go Lugs?ot ug gs? Lugs? s? Lugs? ? gGot Lugs? s?

VIRK DCART TNEMECALPEN RO-

YHNI

AGG/FARM Lugs Available for CAT Challenger, John Deere Speed dozers, Case Quad & More

SGUE LV

K CARC TILUARDYTI KONITALLATASN

FITS Both 18” & 20” Frame Machines

S

FITS Both 18” & 20” Frame Machines

N CS OTNEMLIAREK DCARP TOT

•Capture the Track’s Cleats At All 4 Sides

•Turn Single/Double Sided Factory Wheels Into Triple Sided

•Cat & John Deere Compact Track Loader

hallenger, John Deere Speed dozers, Case Quad & More

SREDAOK LCART TCAPMON C

• Install rubber tracks fast

Capture the Track’s Cleats At All 4 Sides

Turn Single/Double Sided Factory Wheels

Cat & John Deere Compact Track Loader

CAT Challenger, John Deere Speed dozers, Case Quad & More

Install rubber tracks fast with Hydraulic Tools

Visit www.sealsaver.comfor more information or contact us at

1-800-683-5189

Exclusively manufactured by:

Fluid ControlServices, Inc.

1155 Allgood Road • Suite 15Marietta, GA 30062

1-800-683-5189Fax: 770-509-5832

SEAL SAVER has proven effective inConstruction, Mining, Waste Management,Quarries, Refineries, Marinas, Recycling,Wood Products Processing, Steel Mills

and Hot Slag Industries.

SatisfactionGuaranteed!

SEAL SAVER PROTECTIVECYLINDER COVER

KOMATSUD65EX-15

STOP the never ending cycle of cylinder repairs.

Made inthe USA

The SEAL SAVER WILL:Protect cylinders from the elements

• Eliminate dings and dents from fallingdebris • Reduce particle contamination of hydraulic systems • Prevent pitting

due to chemical washes • Extend the lifeof cylinder seals • Eliminate rod scoring

Wind Speed AlarmWind Speed Alarm

508.995.2200 www.maximum-commercial.com

Helps prevent costly wind

damage!

3MAC

Pages 15-17For more information about these attachments and more, visit our Attachments Section on our Web site at www.constructionequipmentguide.com

SECT IONAttachments

GECON Offers Solutions for Various, Diverse ApplicationsIn 2005, Larry Giberson founded

his company, Giberson Enterprisesof Shamong, N.J., with essentiallyone key product — the Eco-Crusher.Not long after, his new companybecame the number one distributorin the world for this jaw crusherbucket.When something proves that suc-

cessful for customers, they cansometimes begin asking, “what elsecan you provide to help me get my

job done faster and more produc-tively?” Larry Giberson respondedby providing customers with justthat — more options and products.Giberson expanded to support cus-

tomers in niche markets outside ofthe crusher buckets, includingscreener buckets, pulverizers,hydraulic breakers, and specialtyattachments used in the recycling,paving and forestry industries.

see GECON page 16

GECON crusher buckets are avail-able in a wide variety of designsand sizes including rotary, jaw, andimpact crusher buckets. Eachbucket category is designed for spe-cific applications. GECON offersfive jaw sizes and 14 rotary sizes tospecifically meet the needs ofunique applications. Also availableare multiple-sized mini-crushers tobe used with compact excavators.

The GECON model SS recy-cler is a skid steer-mountedbucket crusher for smallvolume, onsite processing.

The CT range is a vibrating wheel compactor, which has multiplehydraulic functions and vibrates in both directions with many optionalcompaction wheel widths available.

The Simex T300 skid steer-mounted wheel saw can dry cutasphalt up to 800 ft. (244 m) per hour with wear costs as low as.05 cents per ft., according to GECON.

The Asphalt Float PIC has an adjustable screed that allows the asphalt tobe left higher for compaction. There also is an option to have a screedwith a block out to grade or asphalt sub-grades.

Screening buckets, includingdisc screeners, basketscreeners, vibratory screen-ers and flipping screenersare available and allow one-stop comparisons.

• June 27, 2015 • www.constructionequipmentguide.com • Attachments & Parts Section • Construction Equipment Guide

Giberson Enterprises Expands ProductLine, Rebrands as GECON Attachments

Among the screening buckets GECON offers isRemu multi-functional screening bucket, whichis ideal for padding, mixing, separating andcrushing. The company also carries basket, rid-dling and flipping styles for different applica-tions.

Simex boom-mounted vibratingplate compactors.

The Simex MP1000 planer is 40-in. (101.6 cm) attachment thathas a wide variety of applica-tions for grinding concrete,including tunnel walls, resurfac-ing locks, or any type of wallresurfacing when depth controlis critical.

GECON has multiple size extreme-duty excava-tor-attached concrete pulverizers. Mechanicaland hydraulic powered units are available.

Hydraulic hammers available in a varietyof sizes to meet breaker needs also areavailable.

The Asphalt Float is a popular labor-saving attachment that hooks to anyskid steer for backfilling trenches andpaving them.

GECON from page 15

The SimexPL4025 skidsteer attachedplaning sys-tem millsasphalt andconcrete andconveys awaythe millings,placing themin a windrow.

Customers were pleased with the additions butwere asking for even more robust demolition tools thatwould hold up in severe-duty niche markets. That ledGiberson to search for additional high quality attach-ments manufacturers, such as Simex and others, andthey have become known as application specialists forattachments for all onsite processing of materials. Today, Giberson Enterprises, now doing business

as GECON Attachments, offers a wide variety ofproducts. For more information, visit www.specialtyattach-

ments.com or call 609/268-3451.(This story also can be found on Construction

Equipment Guide’s Web site at www.construc-tionequipmentguide.com.) CEG

Simex’s double-drum excava-tor mounted cutter heads forgrinding is the only cutter headin the world with the motorinside the drums. This machineis direct drive, with no gearboxor chains, thus increasingtorque and reducing wear.

Construction Equipment Guide • Attachments & Parts Section • www.constructionequipmentguide.com • June 27, 2015 •

Since 1985!

CALL JENNIFER TODAY!(888) [email protected]

www.RBusedParts.com

NEW, USED & REMAN PARTS• Undercarriage

• Arms & Booms

• Cylinders

• Valves

• Transmissions

• Pumps

• Engines

• and More!

ENGINEERED TO PERFORM

CUSTOM HYDRAULIC KITS TO OPERATE ATTACHMENTS

FOR EXCAVATORS & TRACTOR-LOADER-BACKHOES

DURABLE BY DESIGN

Kits to operate most any attachment

Welded tube ends for maximum strength & durability

OEM style ORFS or CD62 4-bolt flange

Higher safety standards

Efficient designs with fewer connections

Add on/custom valves

ypical .200” wall thickness

l .200” wall thickness

• June 27, 2015 • www.constructionequipmentguide.com • Attachments & Parts Section • Construction Equipment Guide

Make an Impact.

www.bretec.com

Upgrade your breaking technology

[email protected]

saleswest@hydraulicbreakerservices.comwww.hydraulicbreakerservices.com

Scott DavisonSales Manager,Bretec Breakers, North [email protected]

e aakM

.tacpmn Ie a

@.Cwww

brian@512-276-2408,Brian Costello, Sales Director.O. Box 41405, P

Crushing

@ g g

[email protected]

512-276-2408,Brian Costello, Sales Director

TX 78704Austin, .O. Box 41405, igersTCrushing

@ y

y.hydraulicbreakerservices.cwwwsaleswest@hydraulicbreakerser877-514-3600,

92308, CAalleyApple V Valley13462 Central Road, Building #3Hydraulic Breaker Services

ww

[email protected] 404-345-3716Bretec Breakers, North Sales ManagerScott Davison

comrvices.com

13462 Central Road, Building #3

omc.cetreb.ww

[email protected]

AmericaBretec Breakers, North ,

Construction Equipment Guide • Attachments & Parts Section • www.constructionequipmentguide.com • June 27, 2015 •

Arctic Snow & Ice Products, Inc.

Arctic Sectional Sno-PusherTM

JOIN OUR

DEALER

NETWORK

We support the

We are growing and improving our manufacturing

facility to meet your growing needs. New dedicated

materials processing center, Larger, faster paint

process center and a larger multi station shipping

center. All these improvements were done to service

you, our partner in business. Our commitment to you

is being the best we can be and provide the finest

products in the snow removal industry.

SELL THE MOST SOUGHT AFTER

SNOW REMOVAL PRODUCT

ON THE MARKET TODAY!

WHEN YOU

COMMIT TO US,

ARCTIC COMMITS

TO YOU.

Sectionalsnopusher.com • (888) 2-ICE-SNO

Arctic Snow

Arctic Snow && Ice

Ice Products, Inc.

Ice Products, Inc.

C

ARCTIC

WHEN

COMMIT TO

ARCTIC

TO YOU.

COMMITS

YOU

O US, ,

COMMITS

TO YOU.

TO YOU.

TO YOU.

y , p










We support the

y


Arctic Sectional Sno-PusherSectionalsnopusher



Arctic Sectional Sno-Pusherom • (888) 2-ICE-SNO




c.onalsnopusher.

Arctic Sectional Sno-Pusherom • (888) 2-ICE-SNO




Arctic Sectional Sno-PusherTM

We support the

Keep Up With All the

Industry News, Subscribe to

ConstructionEquipment

Guide Today!Toll Free

800/523-2200


Air CompressorSolutions, Inc.

TEXASOdessa

(432)�335-5900

Ditch Witch of Arizona

ARIZONAPhoenix

(602)�437-0351

Ditch Witch of Southern Arizona

ARIZONATucson

(520)�579-0261

Sierra Machinery, Inc.

www.sierraelpaso.com

TEXASEl�Paso

(915)�772-0613

NEW MEXICOArtesia

(575)�746-6592

Volvo ConstructionEquipment & Services

CALIFORNIABakersfield

(661)�387-6090Fresno

(559)�834-4420San�Leandro(510)�357-9131Sacramento

(916)�388-2244San Diego/Lakeside(619)�441-3690

Corona(951)�277-7620

Papé Material Handling Inc.

www.papemh.com

OREGONPortland

(503)�639-8910Portland

(503)�286-6400Eugene

(541)�689-7407Medford�

(541)�779-3444

NEVADASparks�

(775)�356-9333

WASHINGTONSeattle�

(206)�722-5800Arlington�

(360)�474-8461Fife�

(253)�926-4386Bellingham�

(360)�756-6572Yakima�

(509)�248-5636Pasco�

(509)�545-1959Wenatchee�

(509)�884-2934Spokane�

(509)�536-7300


DEALER IMPRINT AREA

> > >

Kennesaw, Georgia 30144www.kawasakiloaders.com

AN E.P.I.C. GENERATIONEFFICIENT

POWERFUL

INTELLIGENT

COMFORTABLE

DEALER IMPRINT AREA

DEALER IMPRINT AREA

Kennesaw, Georgia 30144www.kawasakiloaders.com

eo kilo

ABILENE NEW HOLLAND, LTD.Abilene, TX 800/382-9271

www.anhltd.com

BANE MACHINERY INC.Dallas, TX 800/594-2263

Ft. Worth, TX 800/601-2263

Tyler, TX 800/594-2200

www.banemachinery.com

OKLAHOMA TERRITORY CONSTRUCTION EQUIPMENTOklahoma City, OK 405/917-9191

Tulsa, OK 918/835-7200

www.oklahomaterritoryequipment.com

APCO EQUIPMENTNorth Las Vegas, NV 800/574-4089

www.apcoequipment.com

TRI-WEST TRACTOR, INC.Livermore, CA 925/455-8200

www.tri-westtractor.com

RASMUSSEN EQUIPMENT CO.West Valley City, UT 800/453-8032

www.rasmussenequipment.com

CLM EQUIPMENT CO. INC.Lafayette, LA 337/837-6693

Lake Charles, LA 337/625-5942

Baton Rouge, LA 225/677-7838

Biloxi, MS 228/396-8740

Houston, TX 281/598-2500

www.clmequipment.com

BEARD EQUIPMENT CO.Midland, TX 432/694-4530

www.beardequipco.com


Storm Co.: From Foreman to Owner

The saying, "One door closes andanother one opens," may be trite but isstill very true. However, some doorscan be harder to open than othersdepending on where one is in his or hercareer.Stephen “Shorty” Wilson had spent

the past 20 + years working as a fore-man at Morgan Tools, a contractor thatbuilt locations for oil and gas industryin Artesia, N.M., when the companydecided to close shop. Wilson, already in his early 60s,

needed to find a solution and fast. A bigcareer move was necessary, not some-thing many people enjoy doing whenthey're nearing retirement age. ButWilson wasn't done by any means. Hedecided to pursue a dream, and a chal-lenging one at that.He already knew the industry, so he

thought that it was time to start his owncompany and pick up as much of theoil pad construction business as hecould. Using another old saying, “bet-ter late than never,” Wilson founded hisnew business in March 2014, also inArtesia, N.M., naming it StormConstruction after his youngest sonDestry (Storm) Wilson. Storm Construction specializes in oil

drilling pads, commonly called “loca-tions” in the industry. These are slabsthat oil rigs are set up on. The drillingpads vary in size, but are typicallyaround 300 by 400 ft (91 by 122 m).The work is challenging. Most of the

sites in New Mexico require significantcrushing and leveling, sometimes cut-ting them into the sides of mountains.Caliche dirt with rock is common butcan create challenges for the equipmentand operator. Wilson determined that he needed to

begin looking for a long-term solutionat the very start of his company.Having worked with Road

Machinery for many years as foreman,

Wilson naturally contacted the equip-ment dealer as he began to build hisfleet.Road Machinery of Carlsbad and

Albuquerque offices works with usconstantly," Wilson said. " They arealways there when we need them. Paz(Manuel) Cono of Carlsbad and RobertCarrillo of Albuquerque have all beengreat about keeping us moving up theladder to success.” That relationship and trust led to the

right equipment to handle the challeng-ing and abundant caliche rock — aKomatsu D65 with a ripper attachment.Dozers with Rippers and Excavatorsare a necessity in this type of environ-ment. Digging sometimes in solid rock

formations is the only option when awell pad must be placed in a specificlocation. “Komatsu’s equipment has always

been top shelf, but we really appreciatethe service we get from RoadMachinery in general," Wilson said. Storm Construction owns three D65

EX 17 dozers, a WA320 wheel loaderand is looking to add a trackhoe fromKomatsu in the upcoming month fromRoad Machinery. It also has threemotorgraders, two backhoes and twodump trucks. “It has been awesome to see them

grow from nothing," Road Machinery'sRobert Carillo said. "They havebecome a great customer."Storm Construction consists of

seven employees, including Wilson’sthree sons — David, Stephen Jr. andJoshua. To date, Storm Constructionhas built more than 40 locations, moston the Northwest Shelf of the PermianBasin in southeast New Mexico. For more information, visit

http://www.roadmachinery.com/.(This story also can be found on

Construction Equipment Guide’s Website at www.constructionequipment-guide.com.) CEG

The Storm Construction Team (L-R) are Thomas Santo, Stephen Wilson Jr., David Wilson, Lonny Hufford, RoscoeKeys and Joshua Wilson.

Stephen Wilson, owner of Storm Construction, and Rhonda DeLong, officemanager.

The Komatsu D65EX is put to workrecently preparing an oil drillinglocation in southeast New Mexico.

KOMATSU EQUIPMENTCOMPANY

1486 South Distribution DriveSalt Lake City, UT 84104

801-972-36604460 Pioneer WayElko, NV 89801775-753-7557

3825 Losee RoadNorth Las Vegas, NV 89030

702-399-1004900 Marietta WaySparks, NV 89431

775-356-13341409 East 3850 SouthSt. George, UT 84790

435-986-100010790 South Highway 59

Gillette, WY 82718307-682-1445

405 Jonah DriveRock Springs, WY 82901

307-686-1300

ROAD MACHINERYwww.roadmachinery.com

Gilbert, AZ480-545-2400

Phoenix, AZ602-252-7121

Prescott, AZ928-778-5621

Tucson, AZ800-989-8681

Bakersfield, CA661-695-4830

Fremont, CA510-659-1903

Fresno, CA559-834-3215

Mojave, CA - Coming Soon

Perris, CA909-355-3600

Pico Rivera, CA562-699-6767

Redding, CA530-229-3820

Sacramento, CA916-375-3540

Albuquerque, NM505-345-8383

Farmington, NM505-324-8601


KIRBY-SMITH MACHINERY INC.6715 W Reno

Oklahoma City, OK 73137800-375-3339405-495-7820

Fax: 405-787-5973

12321 E. Pine StreetTulsa, OK 74116

800-375-3733918-438-1700

Fax: 918-437-7065

Abilene, TX877-577-5729325-692-6334

Amarillo, TX800-283-1247806-373-2826

Dallas, TX800-753-1247214-371-7777

Ft. Worth, TX877-851-9977817-378-0600

Lubbock, TX866-289-6087806-745-2112

Odessa, TX877-794-1800432-333-7000

www.kirby-smith.com

POWER MOTIVE CORPORATIONDENVER HEADQUARTERS

5000 Vasquez Blvd.Denver, CO 80216

888-271-3308

Colorado Springs, CO888-271-3308

Grand Junction, CO888-271-3308

Milliken, CO888-271-3308

Durango, CO888-271-3308

Cheyenne, WY888-271-3308

www.powermotivecorp.com

WAUKESHA-PEARCE INDUSTRIES, INC.

12320 S. MainHouston, TX 77035

713-723-1050Fax: 713-551-0798

Tomball, TX281-351-9016

Kilgore, TX903-984-2011

Port Arthur, TX409-721-5305

Corpus Christi, TX361-884-8275

Edinburg, TX956-386-0107

San Antonio, TX210-648-4444

Pflugerville, TX512-251-0013

Buffalo, TX903-322-7150www.wpi.com


RT9150E rough-terrain craneAt Grove, we provide high-performance features, reliable / support and a quality product lineup – because cranes are all we do. With rough-terrain models ranging from - USt, we’ve got a crane to handle any jobsite.

Featured is the RTE – its USt capacity and ft. boom combination provide the best capacity and longest boom in its class.

For more information, visit www.manitowoccranes.com

Tilt cab Superior boom design Removable outrigger boxes

Need Financing?

8600 Calabash Ave.Fontana, CA 92335562-286-6618

Fax: 909-356-1340275 W. Larch RoadTracy, CA 95304209-597-3824

19602 60th Avenue NEArlington, WA 98223253-254-7950

91-210 Kalaeloa Blvd.Kapolei, HI 96707808-682-7263

5801 Silverado WayAnchorage, AK 99518855-342-72633521 Alken Street

Bakersfield, CA 93308855-927-2637

Western Pacific Crane & Equipmentwww.wpcrane.com

Kirby-Smith Machinery, Inc.www.kirby-smith.com

Oklahoma City, OK800-375-3339Tulsa, OK

800-375-3733Kansas City, KS877-851-5729St. Louis, MO866-279-1392


BANE MACHINERY, INC.2449 Manana Rd.Dallas, TX 75220

214/352-2468Fax: 214/353-2460

Tyler, TX903-597-6641

Ft. Worth, TX817/847-5894

4 RIVERS EQUIPMENTColorado Springs, CO1100 E. Cheyenne Rd.

719/475-1100www.4riversequipment.com

Albuquerque, NM505/884-2900

El Paso, TX915/598-1133

Farmington, NM505/326-1101

Fort Collins, CO970/482-7154

Frederick, CO303/833-5900

Hobbs, NM575/392-6923

Pueblo West, CO719/547-3505

SCOTT EQUIPMENT14635 Valley Blvd.Fontana, CA 92335

800/316-0327Fax: 909/822-4850

www.scottequip.com

BEE EQUIPMENT SALES LTD.2506 Slaton HighwayLubbock, TX 79404

806/745-1511Fax: 806/455-0543

C. L. BOYD CO., INC.4220 West Reno Ave.

Oklahoma City, OK 73107800/OKC-BOYD405/942-8000

Fax: 405/945-8569

Ardmore, OK866/720-2693580/224-2693

Lawton, OK800/633-2693580/355-6667


Putzmeister America Inc. is offeringa free extended warranty on all Mackchassis for domestic truck-mountedboom pumps or Telebelts. In additionto the standard warranty on both 11and 13 L engines, the extended war-ranty offers additional coverage for atotal of 60 months or 250,000 mi.under unlimited hours of operation. The exclusive warranty covers

both engines and engine aftertreat-ment system components, including,but not limited to turbo charger,engine and sensor harness, cylinderassemblies, oil pumps, aftertreatmentcontrol modules and much more. Theextended warranty provides cus-tomers a $4,000 to $5,000 value, freeof charge. “A hallmark of Putzmeister equip-

ment is the added value that is builtinto our products — this offer is anoth-er example of that philosophy,” saidBill Dwyer, vice president of sales andmarketing of Putzmeister America.“The extended warranty complementsthe advanced products, industry

knowledge, quality parts and genuinesupport we already offer customers.We are proud to have the ability topartner with top industry vendors toprovide the best products and serviceto the industry.” The free extended warranty, effec-

tive April 1, 2015, is being offered forall new pump and Telebelt deliveries in

United States and Canada.For more information, call 800/884-

7210 or visit www.putzmeisterameri-ca.com/content/warranty-free-extend-ed-mack-warranty.

(This story also can be found onConstruction Equipment Guide’s Website at www.constructionequipment-guide.com.)

Putzmeister America Announces FreeExtended Warranty on All Mack Chassis

Putzmeister is offering a free extended warranty on all Mack chassis fordomestic truck-mounted boom pumps or Telebelts for a total of 60 monthsor 250,000 mi. under unlimited hours of operation.

Atlas Copco Names Wendy Nester-SchiavoWinner of Its Baseball Prize PackageAtlas Copco Construction Equipment announced that Wendy

Nester-Schiavo was the winner of its baseball prize package.Atlas Copco held the promotion during the 2015 World ofAsphalt tradeshow in Baltimore, where attendees were invitedto download the new Atlas CopcoConstruction App for a chance to win abaseball package for two.Nester-Schiavo, of Stern Nester

Paving in Pottstown, Pa., won twotickets to a professional game of herchoice and a $2,000 voucher for air-fare, hotel and accommodations.“We are so thrilled that Wendy

won our ultimate baseball packageand excited that she’s using our newConstruction App,” said BrianBieller, Atlas Copco vice presidentand business line manager of roadconstruction equipment. “The app isone of the simplest ways for our cus-tomers to stay informed about AtlasCopco equipment and industry news— whether they’re on the job site orat the office they can always haveinformation at their fingertips.”Atlas Copco’s construction app

holds the latest information and tech-

nical data for the manufacturer’s full line of constructionequipment. The app also provides notifications of new prod-uct launches, and other industry news. Simple-to-use filtersmake it easy to find products, and if users need more infor-

mation or a quote, they can request itfrom Atlas Copco within the app.The construction app is compatiblewith Apple and Android devices,tablets and smart phones.To enter the drawing, show atten-

dees could stop by the Atlas Copcobooth during World of Asphalt toshow that they had downloaded theapp. In addition to getting registeredfor the drawing, booth attendees alsogot a look at new equipment fromAtlas Copco, including the CP1200and CP2700 pneumatic tired rollersas well as a new version of its intelli-gent compaction system.For more information, call

800/732-6762 or visit www.atlas-copco.us.


Wendy Nester-Schiavo of Stern NesterPaving in Pottstown, Pa., won AtlasCopco’s baseball package at World ofAsphalt 2015 by downloading the AtlasCopco Construction App.

COLORADOWAGNER EQUIPMENT CO.www.wagnerequipment.com

Aurora 303-739-3000

Denver303-433-2727 (Rental)

Carbondale970-963-7368 (Rental)

Commerce City303-286-2300 (Rental)

Colorado Springs719-390-7316 (Rental)

719-635-1669Granby

970-328-2080 (Rental)Gypsum

970-328-2080 (Rental)Hayden

970-276-3781 Silverthorne

970-262-3788 (Rental)Fort Collins

970-493-5005 (Rental)Grand Junction

970-245-6546 (Rental)970-242-2834

Pueblo719-544-0088 (Rental)

719-544-4433Steamboat Springs

970-871-1990 (Rental)Windsor

970-278-1750 (Rental)Burlington

719-346-7880 (Rental)(719) 346-5132

Durango970-259-2001 (Rental)

970-259-2001Windsor

970-278-1750

OKLAHOMAOCT EQUIPMENT

www.octequipment.comClinton • 580-323-3422

Oklahoma City • 405-789-6812Tulsa • 918-437-5085

TEXASANDERSON MACHINERY CO.

www.andersonmachinerytexas.comCorpus Christi • 361-289-6043

Manor • 512-272-8133Pharr • 956-781-5995

San Antonio • 210-661-2366Victoria • 361-575-8111

HOLT CATwww.holtcat.com

Dallas • 214-342-6700Ft. Worth • 817-847-8880

Irving • 214-342-6700Waco • 254-662-7377

GEORGE P. BANE, INC.www.banemachinery.com

Tyler • 903-597-6641

YELLOWHOUSE MACHINERY CO.www.yellowhouse.us

Abilene • 325-677-2291Amarillo • 806-335-1681Lubbock • 806-763-0473Odessa • 432-580-3337

San Angelo • 325-651-3337Wichita Falls • 940-322-3337

MUSTANG CATwww.mustangcat.com

Houston • 713-460-2000Beaumont • 409-892-8412

Bryan • 979-775-7368Bryan • 979-775-0639

Channelview • 281-452-7368Conroe • 936-756-1110

El Campo • 979-543-3389Freeport • 979-233-7368Houston • 713-462-9993Houston • 713-228-7368LaMarque • 409-935-7000

Lufkin • 936-639-5551Lufkin • 936-632-6775

Nederland • 409-722-7368

WAGNER EQUIPMENT CO.www.wagnerequipment.com

El Paso915-493-5005 (Rental)

915-821-7651


ALASKANC MACHINERY

www.ncmachinery.com800-478-7000

Anchorage, AK • 907-786-7500Dutch Harbor, AK • 907-581-1367Fairbanks, AK • 907-452-7251Juneau, AK • 907-789-0181

Prudhoe Bay, AK • 907-659-6900Wasilla, AK • 907-352-3400

CALIFORNIAHAWTHORNE CAT

www.hawthornecat.comSan Diego • 800-437-4228

Lakeside/Escondido/Chula Vista 800-750-4228 (Rental)

HOLT OF CALIFORNIAwww.holtca.com

Pleasant Grove • 916-921-8969

QUINN CATwww.quinncompany.com10006 Rose Hills Road

City of Industry, CA 90601888-842-2155 • Fax: 562-692-1843

BakersfieldCorcoranFirebaugh

Foothill RanchFresno

LancasterLos AngelesOxnardSalinas

Santa MariaSylmar

HAWAIIHAWTHORNE CAT

www.hawthornecat.comHilo • 808-961-3437Kauai • 808-245-4058Kona • 808-329-4521Oahu • 808-677-9111

Oahu • 808-676-0227 (Rental)Maui 808-877-6538

NORTH DAKOTATRACTOR AND EQUIPMENTWilliston • 701-572-8377

MONTANATRACTOR AND EQUIPMENTBillings, MT • 406-656-0202Billings-Sgt. • 406-245-4426Bozeman • 406-585-5800Great Falls • 406-761-7900Helena • 406-442-2990

NEVADACASHMAN EQUIPMENT

www.cashmanequipment.com3300 St. Rose ParkwayHenderson, NV 89052

702-649-8777Fax: 702-633-4699Elko • 775-738-9871

Reno/Sparks • 775-358-5111

NEW MEXICOWAGNER EQUIPMENT CO.www.wagnerequipment.com

Flora Vista505-334-5522 (Rental)

La Cruces575-647-9700Albuquerque

505-938-2000 (Rental)505-345-8411

Hobbs575-393-2148 (Rental)

575-393-3665Clovis

505-235-3294 (Rental)Farmington

505-327-5331

WASHINGTONN C MACHINERY800-562-4735

Seattle • 425-251-5800Chehalis • 360-748-8845Fife • 253-896-0878

Monroe • 360-805-6000Mt. Vernon • 360-424-4292Wenatchee • 509-886-5561Yakima • 509-248-2371

WYOMINGTRACTOR AND EQUIPMENTWorland • 307-347-4747

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • June 27, 2015 • Page 29 • June 27, 2015 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Link-Belt® Spin Ace® Excavators are packed with all the power, productivity,

Extended service intervals

Model # Operating Weight Net hp @ rpm Tail Swing

*75 X3 and 80 X3 engines are Final Tier 4

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • June 27, 2015 • Page 28 • June 27, 2015 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Link-Belt® Spin Ace® Excavators are packed with all the power, productivity,

Extended service intervals

Model # Operating Weight Net hp @ rpm Tail Swing

*75 X3 and 80 X3 engines are Final Tier 4

Pages 30-31To view our current comparison trailer specification charts visit www.constructionequipmentguide.com

SECT IONTrucks & Trailers

STAHL, a Scott Fetzer Company, is now offering RhinoLining vehicle protection to its work truck and service bodycustomers. Rhino Linings can be applied to the body loadspace and bulkhead, as well as other surfaces such asbumpers and compartment tops, to provide a high level ofcorrosion, impact and abrasion resistance.Rhino Linings protective coatings are sprayed directly

onto truck body surfaces that need heavy-duty protectionfrom corrosion, abrasion and temperature extremes.“Rhino Linings provide excellent protection in rugged and

heavy-duty operating conditions,” said Jeff Jerousek,STAHL’s VP of sales and marketing. “Because it’s a qualityproduct that our customers often ask for by name, we’re nowoffering it as one of the available options for our service truckbodies.”For more information, call 800/277-8245.(This story also can be found on Construction Equipment

Guide’s Web site at www.constructionequipmentguide.com.)

STAHL Offers RhinoProtection for TruckService Bodies

The Scheuerle highway trailer MES(modular extra strong) ties in with thesuccess of former, non-modular mod-els for this market and completes theScheuerle highway trailer series. TheScheuerle highway trailer MESmerges the requirements for transport-ing oversize as well as concentratedloads in one vehicle, thus enabling itsowner to perform an unprecedentedrange of transport jobs with just onemodular vehicle, according to the man-ufacturer. “Our customers asked for a multi-

functional, extra-sturdy but low weightmodular solution and we developedit,” said Roland Fischer, area managersales of TII Sales. “The Scheuerlehighway trailer MES allows aconfiguration as asemi-trailer forall kinds of

everyday’s loads as well as an assem-bly with two platform trailers for anextremely long load like a splitter col-umn, vessels or a large girder weighingup to 115 tons.” This solution, offered solely by the

TII Group, enables transportation busi-nesses to extend their range of trans-portation if needed while, at the sametime, using the Scheuerle highwaytrailer MES in a semi-trailer versionfor “everyday jobs.” This setup canreduce the fleet costs whileopening

possibilities to accept new jobs withextra long or very concentrated loads,according to the manufacturer.”Hydraulic axles, precise steering

also in reverse and lift/lower functionto pick up loads are characteristics ourcustomers don`t want to miss any-more. The Scheuerle highway trailerMES conjoins all of them and comple-ments them by a modular reinforcedconstruction concept saving moneyand opening new business possibilitiesfor our customers” said Fischer.

(This story also can be found onConstruction Equipment Guide’s Web

site at www.construc-tionequipment-

guide.com.)

Scheuerle MES AllowsLoad Efficiency

The Scheuerle high-way trailer MES offers a multitude

of possible combinations, allowing the cus-tomer to cover a broad range of transports.

Rogers Brothers Corp. Celebrates 110 Years in BusinessThis year marks Rogers

Brothers Corporation’s 110 yearsin continuous operation with morethan 100 years of that time devotedto building durable, high perform-ance lowbed trailers. Only one in ten thousand busi-

nesses manages to last 100 years.Even more remarkable is the factthat Rogers is still owned by thefounding family. Each new gener-ation has brought improvementsand innovations to the design andmanufacture of Rogers trailers. Jay Kulyk, Nick Kulyk and

Beth Hough, fourth generation ofthe Rogers family, are leading thecompany into their next century aspresident, vice president and secre-tary respectively. Larry and Mark Kulyk, grand-

sons of founder Louis Rogers,attribute the company’s longevityto family pride. “Each trailer that leaves the fac-

tory has our family name on it,”said Mark. “We want quality anddurability to be associated with thatname.”

Larry continues in his positionas treasurer of Rogers BrothersCorp. and, although Mark hasretired as president, he continues toserve as a consultant. With customers in 65 countries

on five continents, Rogers trailershave literally circled the globe.Customers can choose from

severe-duty or lightweight modelsfor off- or on-road use; hundreds ofcustom designs or “ready-to-ship”standard models; fixed or detach-able gooseneck styles; front or rearloading. The list of options isextensive.Rogers latest trailer designs can

be seen on the company’s new

interactive Web site, which hasbeen launched as part of itsanniversary celebration. For more information, visit

www.rogerstrailers.com.(This story also can be found on

Construction Equipment Guide’sWeb site at www.constructionequip-mentguide.com.)

Rogers Brothers Corporation has been designing and manufacturing lowbed semi-trailers with capacities ranging from 20 to morethan 100 tons (18 to 91 t) for nearly 110 years. Custom-engineered trailers are designed to meet the needs of the transportation, oil,gas, steel, mining, utility and heavy-haul industries.

Construction Equipment Guide • Trucks & Trailers Section • www.constructionequipmentguide.com • June 27, 2015 •

Landoll Corporation Unveils Next Generation TrailerThe Landoll Corporation trailer

division unveiled the “NextGeneration Landoll” (NGL) at itsannual dealer meeting held at TheLandoll World Headquarters inMarysville, Kan., on April 24,2015. The 400 Series traveling axletrailers are the first models thathave received the new hydraulicoperating systems and the all-newGrote lighting package. Dealerssaw firsthand the amazing transfor-mation the trailers have underwent,with increased operational speedand the dynamic lighting packagethat increases visual awareness anddriver safety.“The new hydraulic operating

system, nicknamed HOSS, was atotal collaboration between cus-tomers, vendors and the Landollengineers,” said Jim Ladner,Landoll Corporation’s nationalsales manager. HOSS took over a year to devel-

op. Research started in late 2013with customer interviews revealinggreat opportunities to improve.Operational efficiencies, heatbuildup and noise reduction, and

improved driver safety were focuspoints. Brad Bergman, Landoll

Engineering project manager,explained “The industry is chang-ing to higher flow systems and thenew 20 gpm hydraulic system hasincreased the operational speed ofall functions. The axle travel andwinch line speed have increased byas much as 65 percent.”“You have to see it to believe it,”

said one of the dealers attending

the meeting. “The visual impact ofthe trailer at night is impressive.”The new 53 ft. (16 m) Landoll

Trailer has 22 side marker lights. “We changed every light and

harness on the trailer,” said GaryDwerlkotte, Landoll sales coordi-nator. “Lighting is all about safety.We kept adding lights until wemaximized visual awareness.” “We worked closely with Grote

engineers to develop this custombuilt system. Grote had just

released their new micro-novaLED lights and it was just what wewere looking for,” said LorenWassenberg, Landoll project man-ager. This high-intensity LED light

has a 160 degree projection, mak-ing it the best choice for the sidemarker application. The clearwhite lens and a chrome surroundwere chosen to give the trailergreat eye appeal, day or night,according to the company.

The new “A” series 440 and 455will be 2016 year models. The firstarrivals to dealerships are set forJuly. “This is the biggest jump for-ward we’ve had in years,” statedLadner.For more information, call

800/428-5655 or visit www.lan-doll.com.


The 400 Series traveling axle trailers are the first models that have received the new hydraulic operating systems and the all-new Grotelighting package.

ChampTruck…

Continental Tire SponsorsBig-Rig Truck Racing SeriesContinental Tire the Americas LLC’s

Commercial Vehicle Tire group is now thenamed tire sponsor of the ChampTruckseries, North America’s competitive big-rigtruck racing.Big-rig truck racing can be found in

Europe, Australia, India and South America,and has become one of the largest segmentsof professional motorsports. Now gainingmomentum in the United States and oftenreferred to as the next great American motor-sport series, ChampTruck delivers an excit-ing competition featuring world-class driv-ers on world-class tracks. Continental Tire,as tire sponsor, will equip every truck in theseries with its tires.“We are very excited to be part of the

ChampTruck series and part of this growingsegment in racing,” said Alex Chmiel, direc-tor of marketing of Continental truck tires,the Americas. “Our research and develop-ment engineers spent a lot of time withChampTruck drivers and testing tires atraces to determine the best tire for truck rac-

ing series.”All trucks in the 2015 ChampTruck series

will run the Continental HSR2 tread pattern.“ChampTruck is all about real racing, real

tracks and really big trucks — with speedsreaching 100 miles per hour,” said JohnCondren, executive director and founder ofChampTruck. “It’s crucial our drivers havereliable and durable tires, which is whyChampTruck specifically chose ContinentalTire as our official tire for the MeritorChampTruck World Series. I am confidentContinental Tire’s products will provide thequality needed for top-level competition.”ChampTruck races provide an exciting,

family-friendly event that includes a series of30-minute-long sprint races throughout raceday. The inaugural 2015 season includes 10events across the United States. For more information, visit

www.champtruck.us.com.(This story also can be found on

Construction Equipment Guide’s Web site atwww.constructionequipmentguide.com.)


Battle Creek, MI269.965.1269Byron Center, MI616.878.7450Kentwood, MI616.698.2960Lansing, MI517.272.5033Muskegon, MI231.798.8754New Hudson, MI248.356.5200Romulus, MI734.641.8238Saginaw, MI989.752.9400Sterling Hts, MI586.977.6000Traverse, MI231.943.3700Wixom, MI248.449.6700Wixom, MI(Cons. Division)248.356.5200Zeeland, MI616.748.4108

Alsip, IL708.389.7700East Peoria, IL309.694.4455Rockford, IL815.227.0555Springfield, IL217.789.0351Villa Park, IL630.530.7600

Buford, GA678.318.9500Forest Park, GA770.319.0074Savannah, GA912.964.8079

Asheville, NC828.687.0620Charlotte, NC704.596.8283Greenville, NC252.754.5280Raleigh, NC919.661.8710Bismarck, ND701.250.4882Fargo, ND701.271.2360Minot, ND701.250.4882

Charleston, SC843.414.1120Columbia, SC803.791.0740Piedmont, SC864.704.1060

Chattanooga, TN423.308.7940Knoxville, TN865.525.1845

Evansville, IN812.867.6661Fort Wayne, IN260.482.3681Indianapolis, IN317.247.9125Corbin, KY606.528.9440Louisville, KY502.456.4050Prestonsburg, KY606.874.2104St. Louis, MO314.487.8925

McALLISTEREQUIPMENT CO.

Contact your local dealer:

Volvo Construction Equipment

* Ask about our Fuel Efficiency Guarantee by contacting a Volvo dealer near you, or visit volvoce.com/NAFuel to learn more.

YOU CHOSE GUARANTEED* FUEL EFFICIENCYWITH EXCEPTIONAL DEALER SUPPORT.

Smart Works.

POWER EQUIPMENTCOMPANYwww.power-equip.com

Denver, CO303-288-6801Fax: 303-288-6809

Grand Junction, CO970-243-0722Fax: 970-243-0726

Colorado Springs, CO719-392-1155Fax: 719-390-9604

Johnstown, CO970-669-6209Fax: 970-669-6280

ARNOLD MACHINERY CO.www.arnoldmachinery.com

Salt Lake City, UT801-972-4000Fax: 801-975-9434

Idaho Falls, ID208-523-0822Fax: 208-523-9918

Meridian, ID208-887-6000Fax: 208-887-6013

Twin Falls, ID 208-733-1715Fax: 208-734-6924

Sparks, NV775-356-1511Fax: 775-356-0517

Las Vegas, NV702-642-9000Fax: 702-642-8808

Phoenix, AZ 602-414-1900Fax: 602-414-1904

Tucson, AZ520-294-7677Fax: 520-294-7670

SIERRA MACHINERY, INC.www.sierraelpaso.com

El Paso, TX915-772-0613Fax: 915-772-1964

Artesia, NM575-746-6592

ROMCO EQUIPMENT CO.www.romco.com

AustinRound Rock, TX512-388-2529877-851-1026Fax: 512-388-1781

BuffaloBuffalo, TX903-322-5602Fax: 903-322-5605

CarmineCarmine, TX979-278-3570Fax: 979-278-3573

DallasDallas, TX214-819-4100800-227-6626Fax: 214-819-4102

Ft. WorthFt. Worth, TX817-626-2288866-966-4602Fax: 817-626-8983

HoustonHouston, TX713-937-3005800-865-6998Fax: 713-937-7541

LongviewLongview, TX903-758-5576Fax: 903-758-3079

Rio Grande ValleyMercedes, TX956-565-0100Fax: 956-565-1765

San AntonioSan Antonio, TX 210-648-4600800-966-4601Fax: 210-648-1282

ROL Remote OilfieldLocationThree Rivers, TX 361-254-2317

Contact your local dealer:


WE’VE GOT EXCLUSIVE FEATURES TO GET MORE DONEWith KOBELCO excavators on

for even the toughest

features in our machines

KOBELCO-USA.COM

TRI-WEST TRACTOR6281 Southfront Rd.Livermore, CA 94551

925-455-8200 • Fax: 925-455-8220www.tri-westtractor.com

Orion Equipment18060 Des Moines Memorial Drive

Seattle, WA 98148800-280-8124

www.orion-equip.com

Amarillo Machinery6100 I-40 E.

Amarillo, TX 79118806-372-7800

www.amarillomachinery.com

BANE MACHINERY, INC.2449 Manna Rd.Dallas, TX 75520214-352-2468

Tyler, TX903-597-6641Fort Worth, TX817-847-5894

www.banemachinery.com

Anderson Machinery Co.6535 Leopard St.

Corpus Christi, TX 78409361-289-6043

Pharr, TX956-781-5995San Antonio, TX210-661-2366

Austin, TX512-272-8133Victoria, TX361-575-8111

Odessa, TX432-561-8933

www.andersonmachinerytexas.com


- 6.11.15

RUN STRONG.

Want to run strong equipment?Run Doosan.

Request FREE product information: DoosanEquipment.com/RunStrong31

Doosan and the Doosan logo are registered trademarks of Doosan Corp. in the United States and various other countries around the world. ©2015 Doosan Infracore Construction Equipment America. All rights reserved. | 0615392

CALIFORNIA

COLORADO

MONTANA

NEVADA

OKLAHOMA

OREGON

TEXAS

WASHINGTON

lotchreBChtAu

dle�srekBayanmpo Ctnemipqu Edl

AINROLIFACsreal Deanoso Ddzeiroh

W EGR

agMe

boB

iLselat SnmepiuqW E

2387-615-961ediskeaL

.cn I,.o Cyreinach M13966-64-902

otnemaacrSotneamacr Sf otac

mocd.lothcreb.www0597-229-058aiar MatanS71873-23-166

ww

qH & E ECw22-8909

Sww

moc.tnempquie-eh.ww102-298-2303

nrsoedenH.cn, Isecivret Snmepiu

ODAOROLCmocp.iuqettocs.www

2730-163-00 8∙0022-22naantoF

tnemipqu EttocSmoc.tnempquiewgr.ww

3402-066-259eromrveiL

B

ww

whtroN

cboB

onef Rt oacboBADVAEN

omc.strapnwn.asodo.w8771-2-89604

slla FaibolumCginggi R & & Rstar Ptsew

2280-225-406singlliB

.cn, Iykg Sif Bt oacANATTANANOM

qH & E Eww

oBO

aslTu863-798-7504

yt CiahomalkO.cn, Isecivret Snmepiu

moc.ytickeloftacbo.bww5709-93-3085

yt Cikk CiElytik Clf Et oacbo

AOMHALKO6410-544-888

onRe

6-639

axeTTe

www83 205

hguaneFe

ww

3141-363-7 87∙76334-3niLu�

.cn I,ackjrebim TsaSAXTE

moc.ythguaneef.www6625-578-00 8∙6 652-28

dantlroP.cn, I.y Corenihcay Mth

ONGEORmoc.tnempquie-eh.ww

6662-544-819

G

w75-603

sremarFWww

39

mocp.iuqesremraf.ww

2984-558-88 8∙4860-775notinglruB

yanmpo Ctnemipqu EsNONGTIHSAWWAmoc.kcajreimbtsaxet.ww

314337 877334-3

Haver & Boecker RockyMountains moved its service cen-ter on May 15 from Chilliwack toKamloops, British Columbia, andwelcomed Darcy Fredrickson asan additional sales manager to bet-ter serve western United States andCanadian customers.Haver & Boecker Rocky

Mountains also now serves as theexclusive distributor of Major WireFlex-Mat 3 in British Columbia.“The addition of Darcy as our

sales manager will provide ourcustomers and sales team with awide variety of support, fromequipment servicing to parts avail-ability,” said Markus Kopper,Haver & Boecker RockyMountains general manager. “Thisallows us to provide new and cur-rent customers continued fast

response and yet it positions us foradditional growth in the region’smining industry.”Haver & Boecker Rocky

Mountains serves aggregate, min-ing and industrial mineral produc-ers in Alaska, Idaho, Oregon andWashington, as well as BritishColumbia, Northwest Territoriesand the Yukon. The new locationwill continue to provide the equip-ment rebuilds, sales and service forwhich the company is known.The move and expanded territo-

ry is possible with the recent addi-tion of Fredrickson as a certifiedsales manager. Fredrickson bringsmore than 17 years of direct salesexperience to this role and willassist Kopper in attending to cus-tomers throughout the region —from assisting existing clients to

acquiring new business.In addition to Fredrickson, the

regional growth includes greaterproduct availability, includingMajor Wire Flex-Mat 3 self-clean-ing screens, which are constructedwith independently vibrating wiresbound with polyurethane. Eachscreen will ship the same day fromHaver & Boecker’s Edmontonfacility if ordered by 11 a.m. PST.And, Haver & Boecker RockyMountains will work closely withcustomers to develop lists of criti-cal items to stock for quick avail-ability and to minimize downtime,Kopper added.“The position is an ideal fit for

me because the values of Haver &Boecker align closely with minewhen it comes to customer serv-ice,” Fredrickson said. “It’s a top

priority. Whether we have to fly ordrive to meet a customer for serv-

icing, we will be there at the dropof a hat.”Fredrickson and Kopper said

they are excited and ready to meetthe expanding needs from cus-tomers in mining and aggregateoperations throughout the RockyMountains region.“The additional sales staff, cou-

pled with the new location andexpanded product offerings, willallow us to better serve our cus-tomers with durable and efficientscreening and material processingsolutions,” Kopper said.For more information, call

800/325-5993 or visit www.haver-canada.com.


Haver & Boecker Rocky Mountains Expands, Moves

Darcy Fredrickson bringsmore than 17 years of directsales experience to this roleand will assist Marcus Kopperin attending to customersthroughout the region.

Pages 35-42

Crushing, Screening & Recycling SectionFor more information on crushing, screening and recycling equipment, visit CEG's Web site at www.constructionequipmentguide.com.

IROCK Crushers Offers New Diesel-Powered SidewinderIROCK Crushers has responded to cus-

tomer demand with the introduction of adiesel option for its line of Sidewinder crush-ers. IROCK now offers the Sidewinder-15with a 350-hp Caterpillar C-9 diesel engine,which powers a 100-kW generator for fullon-board power. The power system is analternative to the standard electric option.The crusher is V-belt driven and features a

P.T. Tech clutch, which decreases power lossand increases fuel efficiency. An optionalvibrating feeder with a tipping grid can bepowered by the sidewinder via a variablefrequency drive and remote control. Themachine incorporates a 5 by 16 ft. (1.5 by 4.8m) Cedarapids horizontal screen box with atriple-shaft design for long life. IROCK alsoequipped the new Sidewinder with fourhydraulic outriggers for quick plant set up. Sidewinder crushers screen out a high

percentage of feed material that is alreadythe required size before it reaches the crush-er. This minimizes the amount of materialthat runs through the crusher, which in turnincreases production and reduces wear,according to the manufacturer. Sidewinders feature a closed-circuit

design and a four-bar impactor, and they canproduce up to four product sizes — threeuniformly sorted and one oversized. A flopgate within the pant leg chute gives operatorsthe option to either recirculate the crushedoversized material for further screening andcrushing or divert it to be stockpiled as a 100

percent crushed material.Sidewinders are practical for primary

crushing in sand and gravel applications andrecycled asphalt operations, or for secondaryuse with materials such as recycled concreteand quarry rock. There are three sizes avail-able, each with a three-deck horizontal

screen. With screening areas of 210, 288and 360 sq. ft. (19.5, 26.7 and 33.4 sq m)respectively, the Sidewinder 15, 20 and 30can process 400, 600 and 750 tph (363, 544and 680 t). The mobile crushers feature IROCK’s

rock box, an innovative alternative to dis-charge chutes found on similar units. Therock box uses a shelf system with abrasion-resistant wear bars so crushed material canbuild up and act as a wear liner to effective-ly reduce maintenance. In addition, standardcatwalks alongside the unit provide fullaccess to each side of the screenbox for easeof maintenance or screen media changes. In addition to manufacturing heavy-duty

equipment and high-quality components,IROCK also strives to provide exceptionalcustomer service. The company has con-venient 24-hour online parts lookup andordering, fast delivery and live service sup-port until 9 p.m. EST.For more information, call 866/240-0201

or visit www.irockcrushers.com.(This story also can be found on

Construction Equipment Guide’s Web site atwww.constructionequipmentguide.com.)

Sidewinder crushers screen out a high percentage of feed material that is alreadythe required size before it reaches the crusher. This minimizes the amount ofmaterial that runs through the crusher.

• June 27, 2015 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide

Masaba Portable Screen PlantsFeature Rollaway Chutes

Bulk material handling equipment manufacturer Masaba designs its portablescreen plants with the producer in mind. Masaba plants are built on heavy dutywide flange beam chassis with custom axle configurations. These wheel-basedunits feature standard and custom cross conveyor configurations, rollaway chutes,and are built to house multiple brands of screens.

For more information, visit www.masabainc.com.

Special configurations for various applications:

REMU Screening Buckets

Padding Pipelines

Screening Topsoil

Aerating Compost

Grinding.

Now wide range of models for all types of carriers.

Special configurations for various applications:

REMU Screening Buckets

Padding Pipelines

Screening Topsoil

Aerating Compost

Grinding.

Now wide range of models for all types of carriers.

Call us for pricing and inventory!

Scan

and

wa

tch

video

s

Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • June 27, 2015 •

Makes tough scalping jobs

look easyNew Lokotrack® ST2.8™ mobile scalping screen

The Lokotrack® ST2.8TM track-mounted scalping screen sets a new standard for transportability, capacity and accuracy in mobile scalping screens. It is the perfect choice for recycling applications and Lokotrack® multistage crushing processes, helping you transform even the toughest feed material into pro� t. Contact your local Metso distributor today.

www.metso.com/lokotrack

0% Finance Programs

Available*

*O� er good through July 15, 2015. Program subject to credit approval. Additional terms and conditions may apply. Contact your Metso distributor for complete details.

4428 E Trent Ave.Spokane, WA 99212

800-541-0754

509-535-1654

Fax: 509-534-6741

22431 83rd Ave SKent, WA 98032800-669-2425

253-872-3500

Fax: 253-872-3519

19444 Ivan Street SWRochester, WA 98579

800-304-4421

360-273-4284

Fax: 360-273-4290

5241 N.E. 82nd AvePortland, OR 97220

800-950-7779

971-222-1710

Fax: 503-255-1553

4610 Cloudburst WayEugene, OR 97402

800-826-9811

541-688-7321

Fax: 541-688-2241

1257 West AmityBoise, ID 83705800-221-5211

208-336-8570

Fax: 208-336-8616

2735C Tucker CourtJerome, ID 83338

800-221-5211

208-324-4522

Fax: 208-324-8034

2666 Garrett WayPocatello, ID 83201

800-829-4450

208-233-5345

Fax: 208-235-9658

MODERN MACHINERYwww.modernmachinery.com

CRISP INDUSTRIES, INC.323 Energy Way

Bridgeport, TX 76426

940-683-4070

800-315-0871

Fax: 940-683-2181

South Texas 78155

830-625-6822

Sequin, Texas 78155

830-372-1110

CUTTING EDGE SUPPLY234 East O Street

Colton, CA 92324

800-949-9014

Fax: 909-825-4569

Phoenix, AZ

800-729-1473

N. Las Vegas, NV

702-649-1303

COMPASS EQUIPMENT4688 Pacific Heights Rd.

Oroville, CA 95695

530-533-7284

530-533-8610

Fax: 530-533-7657

www.compassequip.com


Even in granite-like conditions the new Cat MD5150C tophammer drill is out-performing down-the-hole rigs with its high-er productivity and much lower fuel consumption — whileachieving comparable hole straightness, according to the manu-facturer.

Beyond feet per minute, the cost per foot is a clear winner, too.At Iron Mountain Quarry, St. Louis, Mo., the MD5150C drills5.5-in. (14 cm) diameter holes to 70 ft. (21.33 m) deep using 68-mm-diameter drill rod, commonly called drill steel. The bit canlast 1,100 to 1,200 ft. (335 to 366 m), which is the same con-sumption rate as the previous down-the-hole drill. Fuel consump-tion, on the other hand, is much less. Further, the drill steel expe-riences less wear and long life. Owning and operating cost for theCat machine is lower with the simple rock drill design, which canbe serviced in the field, according to the manufacturer.

Matt Jacobs, Cat Drills commercial manager said, “We sawsimilar results in an earlier trial at a Tower Rock limestone quar-ry near St. Genevieve, Missouri. That site has softer rock condi-tions and the MD5150C dramatically outpaced a DTH drill.Austin Powder conducted a bore tracking test and the resultsshowed a hole deviation rate with the MD5150C top hammerdrill that was within the desired range. Tower Rock Quarry wasvery pleased with its higher production and lower operating cost— all while achieving similar hole straightness.”

For more information, visit www.cat.com.(This story also can be found on Construction Equipment Guide’s

Web site at www.constructionequipmentguide.com.)

Caterpillar’s New MD5150C Top HammerDrill Out-Performs in Tough Situations

At Iron Mountain Quarry, St. Louis, Mo., theMD5150C drills 5.5-in. (14 cm) diameter holes to 70ft. (21.33 m) deep using 68-mm-diameter drill rod,commonly called drill steel.

www.petersoncat.comNorthern California

888-738-3776Oregon/Southern Washington

800-452-7676

Chico, CARedding, CAFortuna, CAWillows, CAWillits, CA

Santa Rosa, CASan Martin, CA

San Leandro, CAEugene, OR

North Bend, ORKlamath Falls, OR

Redmond, ORMedford, ORAlbany, OR

Portland, ORSalem, OR

The Dalles, ORLongview, WA

www.wagnerequipment.comAlbuquerque, NM

505-345-8411Aurora, CO

303-739-3000Burlington, CO719-346-7880

Colorado Springs, CO719-635-1669Durango, CO

970-259-2001El Paso, TX

915-821-7651Farmington, NM505-327-5331

Grand Junction, CO970-242-2834

Hayden, CO970-276-3781

Hobbs, NM575-393-2148

Pueblo, CO719-544-4433Windsor, CO

970-278-1750

www.tractorandequipment.comBillings, MT

406-656-0202Billings-Southgate, MT

406-245-4426Bozeman, MT406-585-5800

Great Falls, MT406-761-7900

Helena, MT406-442-2990Williston, ND701-572-8377Worland, WY307-347-4747

www.ncmachinery.comSeattle, WA

425-251-5800Chehalis, WA360-748-8845

Fife, WA253-896-0878Monroe, WA

360-805-6000Mount Vernon, WA

360-424-4292Port Angeles, WA

360-452-9222Wenatchee, WA509-886-5561Yakima, WA

509-248-2371Anchorage, AK907-786-7500

Dutch Harbor, AK907-581-1367Fairbanks, AK907-452-7251

Juneau, AK907-789-0181

Prudhoe Bay, AK907-659-9600

Wasilla, AK907-352-3400


COMMITTED TO YOUR

SAFETY

Solve safety issues and you’re ready for work—without interruptions. s why the new CatThat’

access—whether the cab is in front, behind or to one side of the machine.

Combine that with a rearother safety features, and you have a machine that’

Solve safety issues and you’re ready for work—without interruptions. s why the new Cat® MH3037 reduces slips, trips and falls with ground-level cab


-view camera, sensors that prevent out-of-position operation and Combine that with a rearother safety features, and you have a machine that’

Solve safety issues and you’re ready for work—without interruptions. MH3037 reduces slips, trips and falls with ground-level cab


-view camera, sensors that prevent out-of-position operation and our business.s built for business. Yother safety features, and you have a machine that’

Solve safety issues and you’re ready for work—without interruptions. MH3037 reduces slips, trips and falls with ground-level cab

-view camera, sensors that prevent out-of-position operation and our business.

© 2014 Caterpillar • All Rights Reserved • Printed in USA, their resp T FOR IT T, their respective logos, “Caterpillar YTERPILLAR, BUIL LT FOR IT, CA ATERPILLAR, BUILTT, CACA

corporate and product identity used herein, are trademarks of Caterpillar and may not be used without permission.

Cat.com

© 2014 Caterpillar • All Rights Reserved • Printed in USA,” the “Power Edge”trade dress as well as ellow, their respective logos, “Caterpillar Y

corporate and product identity used herein, are trademarks of Caterpillar and may not be used without permission.

,” the “Power Edge”trade dress as well as corporate and product identity used herein, are trademarks of Caterpillar and may not be used without permission.

www.holtcat.com800-275-4658

Austin, TX • Bridgeport, TXCorpus Christi, TX • Fort Worth, TX

Irving, TX • Laredo, TXLewisville, TX • Longview, TXNorth Dallas, TX • Pflugerville, TXSan Antonio, TX • Sonora, TXTexarkana, TX • Tyler, TX

Victoria, TX • Waco, TX • Weslaco, TX

www.johnson-machinery.comRiverside, CA951-686-4560Indio, CA

760-342-1597Murrieta, CA

951-696-1063Hesperia, CA

760-947-0967

www.mustangcat.comHouston, TX

713-460-2000Beaumont, TX409-892-8412Bryan, TX

979-775-7368Bryan, TX

979-775-0639Channelview, TX281-452-7368Conroe, TX

936-756-1110El Campo, TX979-543-3389Freeport, TX

979-233-7368Houston, TX

713-462-9993Houston, TX

713-228-7368LaMarque, TX409-935-7000Lufkin, TX

936-639-5551Lufkin, TX

936-632-6775Nederland, TX409-722-7368


CRUSHING

MATERIAL HANDLING

SCREENING TRACKS

WASHING & CLASSIFYING

Loading/UnloadingConstruction Infrastructure EnergyAggregate MiningRecycle www.kpijci.com

The complete source for equipment in the aggregate, construction and recycling industries.

www.modernmachinery.com

www.powermotivecorp.com

GNHISURC

EERCS

GNINEE

SCKART

y

REATMDLNAH

LAIRGNIDL &GNHISAWWA

GNIYFISSALC

C

Colorado Springs CO 80906 Dura

p p

ango CO 81301

Crush. Classify. Profit.

CRUSHING PLANTS

Closed-circuit PLANTS

SCREENING PlantsWe Call It EXPERTISE. You Call It PEACE OF MIND.

IROCK knows the demands of your industry. Not just because we hear it, but because we’ve seen it and lived it, too. Our team of experts has years of hands-on experience working in your business and providing superior service. So when it comes to increasing efficiencies, reducing wear and boosting your bottom line, we're confident we have the right answers.

For more information, call 866-240-0201 or see our equipment in action at www.irockcrushers.com.

w w w . i r o c k c r u s h e r s . c o m


Purpose-builtfrom the ground up byMaterial handlers from SENNEBOGEN – 44,000 lbs. to 750,000 lbs.

Simple design… Lift more. Move faster. Save fuel. Run longer. , 0 0 0 44 . , l0 0 0 0 75 7 o ts b l .sbl

S i m p l e d e

e s i g n … L i ft ft mor

re . Mov e faster.

. Sa v e f u e l . Ru n

n longer.

Modern Machinerywww.modernmachinery.com

Spokane, WA800-541-0754

Kent, WA800-669-2425Rochester, WA800-304-4421Portland, OR

800-950-7779Eugene, OR

800-826-9811

Boise, ID 800-221-5211Pocatello, ID

800-829-4450Missoula, MT800-332-1617Kalispell, MT

800-434-4190Billings, MT

800-735-2589

Waukesha-Pearce Industries, Inc.Corporate Office: 12320 So. Main

Houston, TX 77035713/723-1050 • Fax: 713/551-0798

www.wpi.com

Tomball, TX281/351-9016

Kilgore, TX903/984-2011Port Arthur, TX409/721-5305

Corpus Christi, TX361/884-8275

Edinburg, TX956/386-0107

San Antonio, TX210/648-4444Pflugerville, TX512/251-0013

Buffalo, TX903/322-7150

ASCO (Associated Supply Co.)www.ascoeq.com

2012 East Slaton Rd.Lubbock, TX 79404

806-745-2000Amarillo, TX

806-732-8386Odessa, TX

432-337-2823Perryton, TX

806-435-7773

Midland, TX432-685-9999

Wichita Falls, TX940-687-2726

Abilene, TX325-698-2726San Angelo, TX325-655-5666


Taking crushing

to a whole new level

Lokotrack® LT106™The Lokotrack LT106 jaw plant, featuring the proven Nordberg® C106 jaw crusher, is taking primary crushing to a whole new level. New features and an advanced process control system deliver superior productivity and e� ciency. Safe and simple to operate, the LT106 provides you with a compact, highly mobile option to meet your production requirements . For more information, contact your local Metso distributor today.

www.metso.com/lokotrack

0% Finance Programs

Available*

*O� er good through July 15, 2015. Program subject to credit approval. Additional terms and conditions may apply. Contact your Metso distributor for complete details.

CRISP INDUSTRIES, INC.323 Energy Way

Bridgeport, TX 76426940-683-4070

800-315-0871

Fax: 940-683-2181

South Texas 78155830-625-6822

Sequin, Texas 78155830-372-1110

CUTTING EDGE SUPPLY234 East O StreetColton, CA 92324

800-949-9014

Fax: 909-825-4569

Phoenix, AZ800-729-1473

N. Las Vegas, NV702-649-1303

COMPASS EQUIPMENT4688 Pacific Heights Rd.

Oroville, CA 95695530-533-7284

530-533-8610

Fax: 530-533-7657

www.compassequip.com

4428 E Trent Ave.Spokane, WA 99212

800-541-0754

509-535-1654

Fax: 509-534-6741

22431 83rd Ave SKent, WA 98032800-669-2425

253-872-3500

Fax: 253-872-3519

19444 Ivan Street SWRochester, WA 98579

800-304-4421

360-273-4284

Fax: 360-273-4290

5241 N.E. 82nd AvePortland, OR 97220

800-950-7779

971-222-1710

Fax: 503-255-1553

4610 Cloudburst WayEugene, OR 97402

800-826-9811

541-688-7321

Fax: 541-688-2241

1257 West AmityBoise, ID 83705800-221-5211

208-336-8570

Fax: 208-336-8616

2735C Tucker CourtJerome, ID 83338

800-221-5211

208-324-4522

Fax: 208-324-8034

2666 Garrett WayPocatello, ID 83201

800-829-4450

208-233-5345

Fax: 208-235-9658

MODERN MACHINERYwww.modernmachinery.com

WESTATEP.O. Box 50370

Billings, MT 59105800-999-6676

Fax: 406-373-6553

www.westate.com

WHEELER CRUSHING SYSTEMSSalt Lake City, UT • Hurricane, UT

Ogden, UT • Vernal, UT800-779-4450

www.wheelercat.com/crushing


CrAnes

Hydraulic truck Cranes

2004 grove tMs900e, 90 Ton,

Cummins ISM450, Eaton Fuller

9LL, A/C, rooster sheave, block +

ball, MEGAFORM boom 37-142 ft,

Bifold Hydraulic Jib 33-56 ft, main

and auxiliary hoists, cwt 31,500 lbs

lower cabin hours: 9,652 h and

upper crane hour meter: 5,837

hours, 65,283 miles.

Call 954-769-0039 or e-mail com-

[email protected]

eXCAVAtors

2005 Hitachi ZX600LC, 13’ Arm,35.5 Tracks, 60’’ Bucket, Good con-dition, 5,700 hrs ............$209,500.

road Builders Machinery & supply

785-221-1747

LoADers

1996 Komatsu WA250-1, Cab,QC, Good condition, 11,100 hrs$32,500.


785-221-1747

Motor grADers

2001 Caterpillar 140H, NEWSolideal G3 Tires, Municipal Trade,14’ Moldboard w/ new cutting edge,One owner, 15,140 hours$120,000.

nuss truck & equipment800-552-1189

trACtors

2008 new Holland tD5050Tractor-Loader, 4WD, 12x12Shuttle Trans., 540/1000 rpm PTO,Deluxe Factory Cab w/ AC-Heat,83’’ Euro QA bucket, 38’’ QA palletforks, 803 hrs ..................$41,500.

Martin Implement sales708-349-8430

trUCKs

Utility trucks

1995 Ford Ln9000, Water Truck,4,000 Gallon, Good condition. ..................................................CALL.


913-371-3822

Classified Rates:30 Words or Less for $35.00. Each Additional Word is $1.16.For just an additional $20 your ad can be posted on our online searchable database for 30 days

Ad runs for 2 (two) insertions - no changes in second insertion.

PLEASE ENCLOSE PAYMENT WITH ORDER and mail to:470 Maryland Drive• Fort Washington, PA 19034

215/885-2900 • Fax 215/885-2910 • Toll Free 1-800/523-2200

Next Issue

Closes

July 2nd

DO YOu Have a Few Pieces OF HeavY equiPmeNt tO seLL?

Construction Equipment Guide is THE Place to List It!

2 InsertIons In one regIon

(northeast, southeast, Midwest, West)30 words or less$1.16 additional per word over 30For an additional $20 we can post your ad on our website in our online searchable database. You must have a classified print ad to do so.

ONLY

$35Call 800-523-2200or go online to place your ad

www.constructionequipmentguide.com/pages/customer/classifieds.asp

and place your ad through our websiteand we will contact you!

®

CLASSIFIEDS

The Easy Way To Advertise YourEquipment Valued At Less Than $1 MillionRun In Two Consecutive Issues For $105

Here's how the BARGAIN ADS Work:• Supply us with a photo of a machine (one machine per Bargain Ad) and a maximum 20 word description, plus contact and phone number.

• Either email your copy & photo to: [email protected], or mail to: Construction Equipment Guide, 470 Maryland Drive, Ft Washington, PA 19034.

• Cost is $105 per ad, $50 additional for color.

• Your ad will run for two consecutive issues in 1 region.

Your Ad Will Be Seen By Over 23,010 Construction Equipment Buyers in the Western States.

For more information, call Construction Equipment Guide today at

800/523-2200

MCLAREN RUBBER TRACKS FOR MINI EXCAVATORS &TRACK LOADERS, The most trusted brand in Americabrings you quality tracks for your specific make andmodel.

Call McLaren 888-492-4230 12-13 DH

MCLAREN FOR SKID STEER TRACKS, Full flotation; traction; tire protection; machine stability; self-cleaning;less ground damage; fully rebuildable; interchangeableshoe types.

Call McLaren 888-492-4230 12-13 DH

MCLAREN SOLID CUSHION TIRES, for skid steers, backhoes, telehandlers, wheel loaders - Nu-Air Semi-Pneumatic Tire Technology: no flats ever; soft, air-cushioned ride; last 3 to 5 times longer than regularpneumatic tires; rims included; same day shipping; various tire sizes available.

Call McLaren 888-492-4230 12-13 DH

2008 70 Ton Liddell Drop Side Deck Lowboy Tri-AxleTrailer, Tandem Two-Axle Jeep, Two-axle Nitro Stinger withMotor ......................................................................$190,000

Sun Piledriving Equipment 302-539-7187 12-13 BB

“TRACKS FOR YOUR MACHINE!!” $12,000,000 Inventory of High-QualitySUMMIT Rubber Tracks to fit over 6000 models of construction equip. RUBBER PADS AND FLATPROOF SKIDSTEER TIRES also available. $95 Next day shipping to 23 states .............................................................Call

Summit Supply LLCEast, West & South Warehouses

888-888-1248 • [email protected] 13-14 TM

Trench Shoring For Your Job2 or 4 Sided Protection

Rentals - Sales 800-828-8505 13-14 PK


ENCLOSED CARGO TRAILER 6 X 8.CONTACT: WALTER TRAINOREMAIL: [email protected]––––––––––––––––––––––––––––––––NEED CAT BACKHOES 416B / C | NEEDCAT BACKHOES MODEL 416B AND C.MUST BE CLOSED CAB, 4X4, EXT HOE.CONTACT: DAN SEXTONPHONE: 423-212-1472EMAIL: [email protected]––––––––––––––––––––––––––––––––NEED EXCAVATOR 2ND HANDCONTACT: NOORPHONE: 03125905483EMAIL:[email protected]––––––––––––––––––––––––––––––––JOHN DEERE 250C | NEED AIR BAGSFOR JD250CCONTACT: TOMPHONE: 215-624-2221FAX: 215-331-5870EMAIL: [email protected]––––––––––––––––––––––––––––––––CAT D7G DOZER | NEED TO BUY D7GWITH CAT OR HYSTER WINCH, STAN-DARD SHOES (NO LGP) AND S BLADE(NO ANGLE BLADE)CONTACT: NATACHA AUBINPHONE: +33698174467EMAIL:[email protected]––––––––––––––––––––––––––––––––CATERPILLAR EXCAVATOR 225CONTACT: SIM. EDDY. BARNES. KUMAHPHONE: + 233. 206009438 OR.+ 233.24144499EMAIL: [email protected]––––––––––––––––––––––––––––––––KOBELCO SK75UR NACHI PVD3B60LHYDRAULIC PUMP | LOOKING TO BUYA NACHI HYDRAULIC PUMP FOR AKOBELCO SK75UR EXCAVATORCONTACT: MICKEY HOOVERPHONE: 814-236-3606EMAIL: [email protected]––––––––––––––––––––––––––––––––JOHN DEERE 110 BACKHOE | 2004 UPTO 2012 110 JOHN DEERE TLB BACK-HOE LOWEST HOURS POSSIBLECONTACT: WILLIE WEBBEMAIL: [email protected]––––––––––––––––––––––––––––––––(50) WATER TANKER HAULERS | (50)WATER TANKER TRACTOR TRAILERSWITH DRIVERS. 6, 000 / 8, 000 GAL-LONS EACH. 12-16 HRS PER DAY / 7DAYS A WEEK / 5 MONTHS.CONTACT: MIKE LINTONPHONE: 731-438-5268EMAIL: [email protected]––––––––––––––––––––––––––––––––COUPLER FOR CASE CX 225 AND 9045| HYDRAULIC OR MANUAL QUICK COU-PLER THAT WILL FIT A CASE CX 225AND A CASE 9045CONTACT: KEVINPHONE: 856-692-0027EMAIL: [email protected]––––––––––––––––––––––––––––––––CAT D25 OFF ROAD TRUCKS (2 ) |GOOD WORK READY TRUCKS, NORTH-EAST LOCATIONCONTACT: RICHARDPHONE: 603 828-6100EMAIL: [email protected]––––––––––––––––––––––––––––––––

30 TO 35 TON OLDER TRUCK CRANE |1970 OR 80 GROVE, LORRAINE ORLINK BELT 30 TO 40 TON TRUCKCRANE. RELIABLE. EASTERN US ONLY.THANKSCONTACT: BOBPHONE: 919-896-4782EMAIL:[email protected]––––––––––––––––––––––––––––––––HITACHI ZX 270/290 | LATE MODEL LOWHOUR, NORTHEAST LOCATIONCONTACT: RICHARDPHONE: 603-828-6100EMAIL: [email protected]––––––––––––––––––––––––––––––––DIRECT DRIVE CAT 215B | NEEDDIRECT DRIVE FOR 215BCONTACT: JERRY SCHOFIELDPHONE: 303-908-0396FAX: 303-663-3973EMAIL:[email protected]––––––––––––––––––––––––––––––––LCD DISPLAY FOR ROADHOG RH4075 |WE WANT TO BUY NEW LCD DISPLAYFOR ROADHOG, MODEL RH4075.SO,PLS. QUOTE.CONTACT: MR. SHAILESH PRAJAPATIPHONE: +91 02762 251665EMAIL: [email protected]––––––––––––––––––––––––––––––––NEW HOLLAND SKID LOADERS | LOOK-ING FOR NH SKID LOADERS FROM LS170 TO LS 185B. MAY CONSIDEROTHER MODELS. LOOKING TO BUY ATWHOLESALE PRICE.CONTACT: MELCHERT HARVESTINGEQUIPMENTPHONE: 507-838-5507EMAIL: [email protected]––––––––––––––––––––––––––––––––2X TEREX TA25 TRUCKS WITH LESSTHAN 4000 HOURS 2010 UPCONTACT: CALUM PHELANPHONE: 00441603270099EMAIL: [email protected]––––––––––––––––––––––––––––––––LINCOLN WELDING MACHINE | SA 200OR SA 250 LINCOLN WELDINGMACHINECONTACT: ELMER DREHERPHONE: 704-617-7429EMAIL: [email protected]––––––––––––––––––––––––––––––––GRINDING MILL | 1.5HP GRINDING MILLCONTACT: HENRICOPHONE: +263773222022EMAIL: [email protected]––––––––––––––––––––––––––––––––WE NEED RUNNING OR NON-RUNNINGCAT WHEEL LOADERS 910, 920, 930,936 & 936E. WE NEED RUNNING ORNON-RUNNING CAT WHEEL LOADERS950, 950B, 950E, 950F/F-II, 966C/E &966F/F-II WE NEED RUNNING OR NON-RUNNING CAT WHEEL LOADERS 970F,980C, 980F, 988B & 972GCONTACT: RIZPHONE: 832-528-0786EMAIL: [email protected]––––––––––––––––––––––––––––––––DIESEL GENERATOR 610KW |CONTACT: ED MONROEEMAIL: [email protected]––––––––––––––––––––––––––––––––

CAT 140G | PRICE RANGE 35,000-45,000CONTACT: EHABEMAIL: [email protected]––––––––––––––––––––––––––––––––NEED BULLDOZER 12 MONTHS USERUSA IF I BUY I SELL | 6 TONS, TO 120TONS, 1975 TO 2014, RUNNING OR NOT,CATERPILLAR, JOHN DEERE, KOMAT-SU, FROM USA, NOT ADVERTISED, NO,SCAM. SEND E MAIL ONLY, I AM BUYERAND SELLERCONTACT: JEAN MAURICE BOUTINPHONE: 1 450 346 8975EMAIL:[email protected]––––––––––––––––––––––––––––––––LOOKING FOR 6 OR 8 FOOT HIGHUSED CHAIN LINK FENCECONTACT: KENPHONE: 330-219-1003FAX: 330-856-3935EMAIL: [email protected]––––––––––––––––––––––––––––––––JOHN DEERE EXCAVATOR | JOHNDEERE 290 OR 350 EXCAVATOR MUSTHAVE ALL PLUMBING AND CONTROLSFOR HAMMERCONTACT: JOEPHONE: 724 944 5569FAX: 724 535 8869EMAIL: [email protected]––––––––––––––––––––––––––––––––LINCOLN PIPELINER SAE 300DWELDER | LINCOLN CLASSIC 300, SAE300D OR 200D DIESEL WELDERCONTACT: GLORIAPHONE: 402-510-7855EMAIL: [email protected]––––––––––––––––––––––––––––––––ENGINE FOR 977H (53A7625)CONTACT: L. BURNSPHONE: 304 799 6107EMAIL: [email protected]––––––––––––––––––––––––––––––––BANDIT WOOD CHIPPER 250X | USEDBANDIT CHIPPER OVER 12"WITHWINCH LOW HOURS GOOD PRICECONTACT: JOHN OR DEBPHONE & FAX: 603-242-3660EMAIL:[email protected]––––––––––––––––––––––––––––––––1950 CHEVY TRUCKCONTACT: JEFF BELANGERPHONE: 592-1365FAX: 207-287-5730EMAIL:[email protected]––––––––––––––––––––––––––––––––PARTS FOR A LIEBHERR 731CL BULL-DOZER, [ ABOUT THE SAME SIZE AS ACATERPILLAR D6C DOZER ]CONTACT: ERICH DIENERPHONE: 479-785-9669 LET IT RINGLONGFAX: NOT DEDICATED 479-785-9669EMAIL: [email protected]––––––––––––––––––––––––––––––––KOMATSU BR380, 500, 580 TRACK JAWCRUSHER | LATE MODEL LOW HOUR,USA LOCATIONCONTACT: RICHARDPHONE: 603-828-6100EMAIL: [email protected]––––––––––––––––––––––––––––––––

TREE SPADE AND TRUCK | VERMEEROR DUTCHAN, 44"-60" TREE SPADEMOUNTED ON 1 1/2- 2 TON TRUCKCONTACT: STEVE BERNARDPHONE: 507-273-4819EMAIL: [email protected]––––––––––––––––––––––––––––––––LOOKING TO BUY CATERPILLAR 950BOR 966D HAS TO BE IN GOOD CONDI-TION NO WELDS OR CRACKSCONTACT: MOE LAZRAQPHONE: 617-615-7474EMAIL: [email protected]––––––––––––––––––––––––––––––––COMMERCIAL WOOD CHIPPER | WANTTO BUY A 25 TO 40 HP DIESEL OR GAS,STAND ALONE WOOD CHIPPER WITH,AUTO FEED, ROADABILITY FOR 1/2TON PUCONTACT: MIKE DEVLINPHONE: 518-523-2851EMAIL: [email protected]––––––––––––––––––––––––––––––––NEED BULLDOZER D10T U BLADE MSRIPPER | NEED BULLDOZER D10TUNDER 10,000 HOURS ON THE FRAMEREAL HOURS U BLADE AND M S RIPPER I NEED 2 NOT ADVERTISED. NEAR CALIFORNIA ONLYCONTACT: JEAN MAURICE BOUTINPHONE: 1 450 346 8975EMAIL:[email protected]––––––––––––––––––––––––––––––––WE BUY EQUIPMENT MANUALS | WEARE LOOKING TO PURCHASE NEW ORUSED SERVICE, SHOP, PARTS, OPERA-TOR’S OR OTHER MANUALS FOREQUIPMENT OF ALL SORTS, BUT NOTINCLUDED TRUCKS AND VEHICLES.WE PREFER IN BULK, PERHAPS YOUHAVE COMPUTERIZED YOUR SERVICEOR PARTS OPERATION AND YOU HAVEBOOKS OR MANUALS YOU NOLONGER NEED, OR INVENTORIES YOUHAVE NOT SOLD. PERHAPS AS A DIS-CONTINUED PRODUCT LINE. WE WILLPURCHASE IN ANY USEABLE CONDI-TION IN ANY AMOUNT YOU HAVE. CONTACT: GRACE FRANCESPHONE: 270-849-2270EMAIL: [email protected]––––––––––––––––––––––––––––––––

140G/RIPPER 1970 TO 1980CONTACT: KEROY KINGPHONE: 8186443128EMAIL: [email protected]––––––––––––––––––––––––––––––––MACK QUAL AXLES DUMP TRUCK 1990THRU 1998 | OLDER MACK DUMPTRUCKS BEFORE VOLVO STARTEDBUILDING THEM.CONTACT: JAMES OTTESONPHONE: 513-492-9671EMAIL: [email protected]––––––––––––––––––––––––––––––––MASSEY INJECTOR PUMP | A USED ORREBUILD INJECTOR PUMP FORMASSEY MF35 FARM TRACTORCONTACT: BOB RATLIFFPHONE: 606 631 1844EMAIL: [email protected]––––––––––––––––––––––––––––––––USED ENGINE | LOOKING FOR A USEDENGINE TI FIT A CAT FORWARDER 574S/N HF10542CONTACT: GLENN MACEPHONE: 207-942-4838FAX: 207-941-0856EMAIL:[email protected]––––––––––––––––––––––––––––––––WOOD CHIPPER, 15 INCH BANDITCONTACT: KEN THEOBALDPHONE: 207 323 8220EMAIL: [email protected]––––––––––––––––––––––––––––––––EXCAVATOR | WANT TO BUY KOMATSUPC1250-8. (AND PC800-6 IF YOU HAVEOR YOU CAN FIND). SEND INFORMA-TION, PRICE & PHOTOS OF MACHINE.CONTACT: PC12508 AND PC8006PHONE: +84 166 393 5826EMAIL:[email protected]––––––––––––––––––––––––––––––––SEAT FOR 1951 OLIVER WHITE TRACTORCONTACT: SHEILA RYANPHONE: 850-377-7872EMAIL: [email protected]––––––––––––––––––––––––––––––––AIR COMPRESSOR XAS90 DEUTZ |LOOKING FOR ATLAS COPCO XAS90185CFM AIR COMPRESSOR. WANTINGPARTS MACHINE.CONTACT: ROB MCCORMICKPHONE: 580-741-1333EMAIL:[email protected]––––––––––––––––––––––––––––––––CONCRETE BUGGY | LOOKING TO BUYA BUGGY .WOULD YOU HAVE ANY-THING AROUND ALTOONA PA 16686CONTACT: PETE PATTONPHONE: 814-931-5615FAX: 814-684-0481EMAIL:[email protected]––––––––––––––––––––––––––––––––BULLDOZER D3D4 D5 WEST COASTNEAR TEXAS I HAVE D11R 2000 WITHRIPPER U BLADE SS RIPPER 21000HOURSCONTACT: JEAN MAURICE BOUTINPHONE: 1-450-346-8975EMAIL:[email protected]––––––––––––––––––––––––––––––––

HEAVY EQUIPMENT WANTED GHANA |EXCAVATOR RENTING BUSINESS ISBOOMING IN GHANA, ESPECIALLY INTHE WESTERN REGION WHERE OILEXPLORATION AND GOLD MINING ARETHE LEADING INDUSTRIES, MACHINESSUCH AS DIESEL TANKERS, TRUCKS,BULL DOZER, LOW-BIRD A GOODINVESTOR OR FINANCERS CAN MAKEUP TO ABOUT 100% PROFIT WITHIN AYEAR. CONTACT: EVANSPHONE: +233 244970219EMAIL: [email protected]––––––––––––––––––––––––––––––––BORING EQUIPMENT | VERMEER 913OR DITCH WITCHCONTACT: UGHERTYPHONE: 615-775-2949EMAIL: [email protected]––––––––––––––––––––––––––––––––CD150 USED GODWIN BEARING CARRIAGECONTACT: LARRYPHONE: 225-603-0574EMAIL: [email protected]––––––––––––––––––––––––––––––––SIGN TYPE BOOM TRUCK | 55 TO 75 FT.BOOM TRUCK WITH REMOTES, BAS-KET. SKYHOIST, ELLIOTT, OR OTHERBOOM WITH REMOTE.CONTACT: JIM PHELANPHONE: 650-738-0125EMAIL: [email protected]––––––––––––––––––––––––––––––––LOOKING FOR A USED HIGHWAY MESSAGE BOARD. POSSIBLY AS ADONATION.CONTACT: JIM RANKINPHONE: 360-652-8277FAX: 360-652-7543EMAIL:[email protected]––––––––––––––––––––––––––––––––MITSUBISHI K4N MOTOR | K4N 2.9 LMOTOR FOR A CAT 305 EXCAVATORCONTACT: DEAN ELKINPHONE: 509-536-7677FAX: 509-536-4109EMAIL:[email protected]––––––––––––––––––––––––––––––––ALLIS CHALMER 5040 TRACTOR | NEEDLOCATION TO VIEW CLOSEST PROXIMI-TY TO SULPHUR SPRINGS, TEXASCONTACT: JEANETTE WALLINGPHONE: 903-439-8737EMAIL: [email protected]––––––––––––––––––––––––––––––––CASE MODEL 33 BACKHOE ATTACH-MENT. UNIT ON 310G IS WAY TOO BIG.FRONT END FLOATS ALREADY HASPROPER WEIGHTS.CONTACT: SCOTTPHONE: 717-737-9350EMAIL: [email protected]––––––––––––––––––––––––––––––––1998 - 2005 MINI EXCAVATOR | ANYBRAND, WEIGHT: 7-8,000 POUNDS.NEED HYDRAULIC THUMB PREF.CONTACT: DWIGHT OBERGPHONE: 971-221-9334EMAIL: [email protected]––––––––––––––––––––––––––––––––BOBCAT MT 50 MINI SKID STEERCONTACT: BRIAN DUBESPHONE: 865-660-0036EMAIL: [email protected]––––––––––––––––––––––––––––––––

Attention Contractors!Post Your Wanted To Buy Listings FREE!

Here’s How! List Your Wanted ItemsIf you would like to place your Wanted To Buy listings on our website for inclusion in our newsletters, simply visit:

www.ConstructionEquipmentGuide.com/wanted and enter your listings. Inappropriate or Sale Ads will be Deleted


ALEX LYON & SON AUCTIONEERS

www.lyonauction.com315-633-2944�

• Las Vegas, NVSat., June 27, 2015For: Late Model Rental Returns

• Syracuse, NYSat., July 11, 2015For: Late Model Cat, Komatsu, JDEarthmoving Equipment

• Dallas, TXTues., July 21, 2015For: Earthmoving Rental FleetEquipment Auction & more

• Auburn, MESat., July 25, 2015For: Late Model Cat ConstructionEquipment

• Little Rock, ARWed., July 29, 2015For: Late Model ConstructionEquipment, Truck Tractors, Trailers &more

• Queretaro, MexicoFri., July 31, 2015For: Late Model ConstructionEquipment, Forklifts, Aerial Lifts,Trucks, Trailers & more

• Buffalo, NYSat., August 1, 2015For: Construction Equipment & TruckAuction

• Orlando, FLWed., August 12, 2015For: Late Model Rental FleetEquipment

• Pittsburgh, PASat., August 15, 2015For: Very Large Job Completion, LandClearing Equipment

• Cleveland, OHThurs., August 20, 2015For: Rental Return ConstructionEquipment: Aerials, Forklifts, SupportEquipment & more

• Racine, WISat., August 22, 2015For: Late Model Dump Trucks,Construction Equipment & more

• Syracuse, NYThurs., August 27, 2015For: Retirement Auction of LandscapeContractors

• Utica, NYSat., August 29, 2015For: Large Job Completion Auction:Construction Equipment

• Middletown, NYSun., August 30, 2015For: Large Acquisition of RentalCompany: New & Used SupportEquipment & more

• Boston, MASeptember 19 - 20, 2015For: All types of ConstructionEquipment & more

• Atlantic City, NJSat., September 26, 2015For: Late Model ConstructionEquipment & more

• Rochester, NYSat., October 10, 2015For: Very Large Rental ReturnsAuction. Construction Equipment &more

• Toronto, Ontario, CanadaMon., November 23, 2015For: Very, Very Large Late Model JDAgricultural Tractors & more

RITCHIE BROS. AUCTIONEERS

www.rbauction.com402-421-2631

• Kansas City, MOJune 30, 2015

• Raleigh-Durham, NCJune 30, 2015

• Midland, TX

July 9, 2015

• Kansas City, MO

July 21, 2015

• Fort Worth, TX

July 22-23, 2015

• Los Angeles, CA

July 24, 2015

• Manchester, NH

July 28, 2015

• Chicago, IL

July 30, 2015

• Chehalis, WA

July 30, 2015

• Williston, ND

August 5, 2015

• Orlando, FL

August 13, 2015

• Tipton, CA

August 26, 2015

• North East, MD

August 27, 2015

• Las Vegas, NV

August 28, 2015

• Phoenix, AZ

September 2, 2015

• Albuquerque, NM

September 30, 2015

• El Paso, TX

October 21, 2015

BAR NONE AUCTION

www.barnoneauction.com

866-372-1700�

• Sacramento, CA

Sat., July 11, 2015For: Heavy Equipment & CommercialTruck Auction

• Riverside, CA

Sat., July 18, 2015For: Heavy Equipment & CommercialTruck Auction

• Sacramento, CA

Sat., August 8, 2015For: Heavy Equipment & CommercialTruck Auction

• Sacramento, CA

Sat., August 15, 2015For: Heavy Equipment & CommercialTruck Auction

BIDADOO AUCTIONS

www.bidadoo.com

1-877-BIDADOO�

• ONLINE ONLY

June 25 – July 2, 2015For: Pre-Summer Rental Sale

• ONLINE ONLY

July 2 - 9, 2015For: Construction Equipment

• ONLINE ONLY

July 9 - 16, 2015For: Construction Equipment

• ONLINE ONLY

July 16 – 23, 2015For: Construction Equipment

• ONLINE ONLY

July 23 – 30, 2015For: Construction Equipment

• ONLINE ONLY

July 30 – August 6, 2015For: Construction Equipment

• ONLINE ONLY

August 6 - 13, 2015For: Construction Equipment

• ONLINE ONLY


• ONLINE ONLY


BIG IRON

www.bigiron.com800-937-3558�

• ONLINE ONLYJuly 1, 2015





COCHRAN AUCTIONS

www.cochranauctions.com�301-739-0538

• Washington County, MDJuly 2 - 3, 2015For: Construction Equipment & more

DAVIS AUCTIONS, INC.

www.davisauctionsinc.com�203-758-4087

• Prospect, CTSat., September 26, 2015For: Construction Equipment

• Prospect, CTSat., December 12, 2015For: Construction Equipment

DON SMOCK AUCTION CO., INC.

www.dsa-auctions.com765-778-9277

• Pendleton, INFri., September 18, 2015For: 23rd Annual Fall Auction

• Cecil, OHSat., October 17, 2015For: 2nd Annual Fall NW OhioConsignment Auction

• Pendleton, INFri., December 11, 2015For: 23rd Annual Snowball Auction

EQUIFY AUCTIONS, LLC

www.equifyauctions.com�903-873-6777

• Cisco, TXThurs., July 30, 2015For: Construction Equipment

EQUIPMENT ROW.com

www.equipmentrow.com580-931-6156

• ONGOING ONLINE TIMED Construction Equipment, Trucks/Trailers, Farm Equipment & Salvage.New items added daily!

HENDERSON AUCTIONS

www.hendersonauctions.com225-686-2252

• Livingston, LAJuly 23 - 24, 2015For: 2 Day Summer Public Auction

• Carencro, LASeptember 2-3, 2015For: 2 Day Fall Contractor’s Auction

• Livingston, LANovember 11-12, 2015For: 2 Day Winter Contractor’s Auction

HOLLAND EQUIPMENT SERVICES

www.hesequipment.com

�616-396-5535

• ONLINE ONLY

Bidding Closing July 28, 2015For: Construction Equipment

HUNYADY AUCTION COMPANY

www.hunyady.com

�800-233-6898

• Blairsville, PA

Thurs., August 13, 2015For: Large Absolute Auction: GalwayBay Corp.

I.R.A.Y. AUCTION

www.iraymn.com

�320-968-7230

• Foley, MN

Fri., September 11, 2015For: Heavy Equipment

• Foley, MN

Fri., December 4, 2015For: Heavy Equipment

IRON PLANET AUCTIONS

www.ironplanet.com

�888-433-5426

ONLINE AUCTIONSGo to www.ironplanet.com to view the

complete auction schedules, inspection

reports and to place your bid!

• ONLINE ONLY

Thurs., July 9, 2015For: Construction Equipment

• ONLINE ONLY


• ONLINE ONLY


• ONLINE ONLY


JAMES G. MURPHY INC.

AUCTIONEERS

www.murphyauction.com

�800-426-3008

• Kenmore, WA

Sat., July 25, 2015For: Heavy Equipment & ContractorsAuction

• Kenmore, WA

Sat., October 3, 2015For: Heavy Equipment & ContractorsAuction

• Kenmore, WA

Sat., December 5, 2015For: Heavy Equipment & ContractorsAuction

JEFF MARTIN AUCTIONEERS, INC.

www.jeffmartinauctioneers.com

�601-450-6200

• Brooklyn, MS

July 29 – August 1, 2015For: Late Summer Public Auction

• Calera, AL

Sat., August 15, 2015For: Farm & Construction Equipmentand more

J.J. KANE AUCTIONEERS

www.jjkane.com

�855-GO2-KANE

• West Palm Beach, FL

Sat., June 27, 2015For: Used Heavy Equipment

• Lansing, MI

Sat., July 11, 2015For: Used Heavy Equipment

• Salt Lake City, UT

Thurs., July 16, 2015For: Used Heavy Equipment

• South Beloit, IL

Sat., July 25, 2015For: Used Heavy Equipment

• Charlotte, NC

Thurs., July 30, 2015For: Used Heavy Equipment

• Worcester, MA

Sat., August 1, 2015For: Used Heavy Equipment

• Philadelphia, PA


• Salt Lake City, UT

Thurs., August 20, 2015For: Used Heavy Equipment

• Rome, NY


PAUL E. SAPERSTEIN INC.

www.pesco.com

�800-660-6553

• West Yarmouth, MA

Tues., June 30, 2015For: Construction Equipment

PETROWSKY AUCTIONEERS INC.

www.petrowskyauctioneers.com

�860-642-4200

• North Franklin, CT

June 26 - 27, 2015For: Major 2 Day Construction,Earthmoving, Site Development,Trucks, Trailers, AG & more

• Manchester, VT

Sat., July 18, 2015For: Major Equipment DispersalAuction

• Cambridge, OH

Thurs., August 13, 2015For: Major Heavy Equipment & TruckAuction

PURPLE WAVE AUCTION

www.purplewave.com

�866-608-9283

• ONLINE ONLY


• ONLINE ONLY

Tues., July 21, 2015For: Trucks and Trailers

RITCHASON AUCTIONEERS INC.

www.ritchason.com

�800-806-3395

• Lebanon, TN

Sat., June 27, 2015For: Heavy Equipment, Trailers, Trucks& Commercial Vehicles

ROGERS REALTY

& AUCTION COMPANY

www.rogersauctiongroup.com

�800-442-7906

• Charlotte, NC

Sat., September 19, 2015For: Charlotte/Mecklenburg RollingStock Auction

ROLLER AUCTIONEERSwww.rollerauction.com�866-515-1668

• Denver, COWed., July 15, 2015For: Heavy Construction & ContractingEquipment

• Colorado Springs, COThurs., July 16, 2015For: Liquidation/Precision Sampling

• Denver, COWed., September 16, 2015For: Heavy Construction & ContractingEquipment

• Denver, COWed., November 11, 2015For: Heavy Construction & ContractingEquipment

SCOTT PERRY & CO.www.scottperryco.com716-283-7653

• Saratoga Springs, NYThurs., July 9, 2015For: NYS Dept. of EnvironmentalConservation

• Cortland, NYWed., July 22, 2015For: NYS Dept. of EnvironmentalConservation

• Unadilla, NYThurs., July 23, 2015For: NYS Police – Troop ‘C’

• Hornell, NYWed., August 19, 2015For: NYS Dept. of Transportation

• Castile, NYThurs., August 20, 2015For: NYS Office of Parks & Recreation

STEFFES GROUP INC.www.steffesgroup.com�701-237-9173

• West Fargo, NDWed., July 29, 2015For: Aglron Event

• Litchfield, MNThurs., September 3, 2015For: Aglron Event

RTI AUCTIONSwww.teitsworth.com�585-243-1563

• Seneca Falls, NYAugust 13 - 14, 2015For: Empire Farm Days

US AUCTIONwww.us-auctioneers.com�208-434-5555

• Kimberly, IDTues., June 30, 2015For: Idaho Construction Co. Auction

UTILITY AUCTIONSwww.utilityauctions.net�302-530-9103

• Wilmington, DEFri., August 28, 2015For: Public Auction: Construction,Utility & Forestry Equipment

WAYNE PIKE AUCTION COMPANYwww.waynepikeauction.com763-389-2700

• Princeton, MNSat., September 12, 2015For: Heavy Equipment

• Princeton, MNSat., December 5, 2015For: Heavy Equipment

WSM AUCTIONEERSwww.wsmauctioneers.com�623-936-3300

• Phoenix, AZSat., July 11, 2015For: Live Auction: Heavy Equipment &more

AuctionsComingTo view information on upcoming auctions visit our

Auction Calendar at www.constructionequipmentguide.com


WSM Auctioneers Holds Monthly Public Consignment Sale

Scott Davis (L) and Jake Watson of SS&J Lawn and Landscaping Service ofGlendale, Ariz., are interested in the Komatsu SK815 skid steer loader.

John Cadzow (L), owner of WSMAuctioneers, speaks with Steve Perica ofthe The Surplus Property ManagementOffice of the Arizona Department ofAdministration.

Manny Romero, ownerof Romero’s Welding andConstruction, came allthe way from Guadalajara,Mexico, to bid on theKomatsu WB146 back-hoe loader.

This Terex truck lift held the interest of IvanLoya, Loya’s Air Conditioning Service.

Jack McComb of Phoenix buys and sells usedequipment.

Jim Whitaker of AZ Lowcost Equipment,Phoenix, Ariz., checks out the Ditch WitchRT40 trencher.

Charlie Mattox of Flint Farms traveled fromParker, Ariz., to check out the assortment ofbackhoe loaders at the auction, includingthis Cat 426.

WSM Auctioneers held its monthly publicconsignment auction on June 13, at itsfacility on South 67th Ave. in Phoenix,

Ariz.The auction included a large number of utility

trucks as well as bucket trucks, crane trucks, heavyequipment, and a variety of construction materials.Approximately 800 bidders from throughout the

Southwestern states and Mexico were present.WSM Auctioneers specializes in the sale of

heavy equipment, bucket trucks, steel, farm imple-ments, construction materials, fleet & utility sur-plus, used vehicles and hand tools.WSM Auctioneers’s next auction will be held

on July 11.(This story also can be found on Construction

Equipment Guide’s Web site at www.construc-tionequipmentguide.com.)

Ray (L) and Carl Purtill of Snappy Lawn Servicein Phoenix bid on a Cat backhoe loader.


2008 Caterpillar TL943 Telehandler 2011 Case 650L Crawler Tractor

2006 Caterpillar 322CL Track Excavator 2006 Caterpillar 14H Motor Grader

2010 Caterpillar 938H Wheel Loader 2006 Case 580 Super M Series 2 4x4 Backhoe Loader

Period.

HUNDREDS OF INSPECTED AND GUARANTEED ITEMS FOR SALE

FAMILY OF BRANDS

July 9, 16, 23, 30UPCOMING AUCTIONSEVERY THURSDAY

WEEKLY ONLINEAUCTIONS

OMING AUPC

UCTIONS

S OF INSPECTED AND GUHUNDRED

OMING A

S OF INSPECTED AND GU

ARANTEED ITEMS FS OF INSPECTED AND GU

ALEOR SARANTEED ITEMS F

OMING AUPCEVER

UCTIONSOMING AYAAYY THURSDEVER

, 16, 23, 30July 9

, 16, 23, 30

2008 Ca

eerpillar TL943 T Telehandlert2008 Ca

elehandler

11 Case 650L Cr20

or actrwler Ta11 Case 650L Cr

2006 Ca

ack Exrerpillar 322CL Tt2006 Ca

ortavcaack Ex

t2006 Ca

ader or Grerpillar 14H Mott

ader

20

heel L38H Werpillar 9t10 Ca20

oaderheel L

2006 Case 580 Super M Series 2 4x4



20

onplanet..irwww888-433-5426

heel L38H Werpillar 9t10 Ca20

T

omconplanet.888-433-5426

oaderheel L

o buy and sell used equipment. y tat whe besT


o buy and sell used equipment. SY OF BRANDAMILLY OF BRANDF

2006 Case 580 Super M Series 2 4x4 oaderBackhoe L

o buy and sell used equipment.


eriod.P


Once FEMA Certified, Contractors Can Ready Trucksical storm due to hit the area. It could be a longwet summer in southern Texas.After the first storm dumped 10 to 12 in.

over parts of the city, crews waited for theflood waters to abate, then went out on theirregular trash pick-up routes. “People are still putting out trash as usual,”

Readore said. “If we don’t pick up, we’ll getbehind.” Meanwhile, contractors readied their trucks

to focus on storm debris. But that is no quickprocess. The trucks must first be certified byFEMA.“To qualify for FEMA, trucks have to be

verified for volume capacity,” Readore said.“A monitor follows each truck. When theyleave the route they have to go to the dumpand the monitor verifies how much material ison it before and then again when they get tothe dump. It’s just check and balance. If youdon’t have it in place, you probably won’t bereimbursed for the material. All contractortrucks have to be certified before they can goout and collect.”Certified trucks serviced the hardest hit

areas first. “There are pockets of neighbor-

hoods in the southwest part of townthat got hit the hardest, where theyhad 3 to 4 feet of water, Readoresaid. “They had to pull all the car-pets, the furniture, the sheetrock.Some houses have piles of materi-al just sitting outside.”While the bulk of the debris is

construction debris, there also aresome trees and vegetation and alot of cars, he said. Most of thosewill end up being scrapped since alot of them are old and the driverscarried only liability insurance.

FLOOD from page 1

see FLOOD page 50

It is estimated cleanup will cost the city between $15 to $20 mil-lion. And the money will only come in after the invoices go out —nothing is coming in upfront.

“I would think in about two months everything should be looking prettygood,” Gary Readore, chief of staff of the Houston Solid Waste ManagementDepartment, said. “Probably before that, but I don’t want to underestimate.”

Certified trucksserviced the hardest

hit areas first.

While the bulk of the debris is construction debris, there also aresome trees and vegetation and a lot of cars. Most of those will endup being scrapped because a lot of them are old and the driverscarried only liability insurance.

The city has asked residents to segregate the waste into separatepiles, such as one just for household hazard waste.

“There are pockets of neighborhoods inthe southwest part of town that got hitthe hardest, where they had 3 to 4 feetof water.”

Gary ReadoreHouston Solid Waste Management Department

Left on the street too long, the debris could attractrodents, generate odors and in general become a serioushealth hazard.


IronPlanet sold $33.7 million inequipment at auctions held on May 13and 14, 2015. In addition to sales acrossits online marketplaces IronPlanet,TruckPlanet, and GovPlanet,IronPlanet held two onsite auctions: aCat Auction Services live unreservedpublic auction in Morgantown, W.Va.,and a Kruse Energy & EquipmentAuctioneers two-day auction inOdessa, Texas.

More than 25,000 people attendedthe auctions online and onsite, buyingmore than 2,750 lots of equipment for$33.7 million in gross merchandisevalue (GMV). IronPlanet’s KruseEnergy & Equipment Auctioneers sawstrong pricing across its oil and gasofferings, including 20-plus well serv-ice rigs, nine drilling rigs and a fullfracking fleet package that brought arecord price at auction.

“Morgantown was our fourth CatAuction Services event this year andwe couldn’t be more pleased with thebuyer turnout and pricing for equip-ment sold,” said Gregory J. Owens,

IronPlanet chairman and CEO. “We arevery pleased with our integration withCat Auction Services and the value weare driving for all of our sellers andbuyers in a live, onsite auction format,attracting large local participation atour auctions as well as combiningeffectively with our global buyer baseonline.

“In addition, Kruse Energy andEquipment Auctioneers continues toset the standard in bringing togethersellers and buyers of oilfield drillingand services equipment. Kruse’s trust-ed expertise in this market combinedwith IronPlanet’s data-driven modelcontinues to produce strong results forour sellers.”

The Cat Auction Services’ auctionhosted by Cleveland BrothersEquipment Co. in Morgantown, W.Va.,generated significant interest from bothconsignors as well as buyers resultingin a broad line-up of late model, lowhour equipment. Robust onsite andonline end-user buyer participationdrove strong price performance across

key equipment categories including:Cat D6T crawler tractors, Peterbilt 367and Mack GU713 dump trucks as wellas Komatsu HM300 articulated dumptrucks, and Cat 316 track excavators,among others.

“As a Cat Auction Services dealerwe are pleased that our first auctionpost-merger with IronPlanet was aresounding success," said ClevelandBrothers’ Bill Yurkovic, corporate usedEquipment manager. "This is one moreavenue to provide our customers withmore complete services not receivedanywhere else in the industry. We con-tinue to provide customers, as theymanage their fleets, with many optionsthroughout the process. The combina-tion of Cat Auction Services' live salein conjunction with IronPlanet's onlineplatform is a win-win for everyone."

For more information, visitwww.ironplanet.com.


IronPlanet Boasts More Than $33M in Equipment Sales During May Auction

Why Wait?

Auctions Every Month

Sell your equipment with WSM.

1616 S. 67th Ave. • Phoenix, AZ 85043Call Today (623) 936-3300www.wsmauctioneers.com

Specializing in:• Construction Equipment • Utility Trucks• Light Trucks• Equipment Trailers

2nd Saturday of every month.

Next AuctionJuly 11


Ritchie Bros. Sells More Than $40M at Denver, Colo., SaleRitchie Bros. sold more than

$40 million of equipmentand trucks at a record-

breaking auction in Denver, Colo.,June 11 to 12. The two-day unre-served public auction set multiplesite records, including total sales,online sales ($17 plus million),total number of buyers (1,000plus), number of online buyers(480 plus), number of sellers (410plus) and number of lots sold(2,400 plus). Bids were made inperson, online at rbauction.comand by proxy.“This was our largest sale ever,

attracting more than 3,800 biddersfrom 48 U.S. states and 49 othercountries,” said Casey Fencl,regional sales manager, RitchieBros. Auctioneers. “Local contrac-tors who held onto equipment overthe last few years are now startingto feel more optimistic due to anincrease in residential and com-mercial construction. Many localcustomers are choosing to sell andupgrade their fleets, which resultedin a record-setting amount of

equipment in this auction. We alsoreceived consignments from localdealerships upgrading their rentalfleets. We noticed particularlystrong pricing on construction andtransportation equipment in theauction last week.”Buyers from outside of

Colorado purchased $27 plus mil-lion (69 percent) of equipment and

trucks. Equipment sold tobuyers from as far away asEgypt, Costa Rica, Japanand New Zealand.The auction included

125 plus items for Trinidad,Colorado-based PurgatoireValley Construction Inc.The family-run companyhas been in operation for

more than 20 years and works on awide variety of projects, includingstreet construction, sewer andwater infrastructure, pipeline con-struction, gas and oilfield infra-structure and more.“We sold everything from doz-

ers, excavators and scrapers topickup trucks, hiboy trailers andmore as part of a realignment ofour fleet,” said Dean Moltrer, vicepresident of Purgatoire ValleyConstruction. “We’ve worked withRitchie Bros. for many years, both

buying and selling. They alwaysput their customers first and makesure we are taken care of and wellrepresented.”The Ritchie Bros. auction calen-

dar at rbauction.com currently fea-tures more than 90 unreservedpublic auctions around the world,including the Company’s next auc-tion in Denver, Colo., on Aug. 6.


Ritchie Bros. sold more than $40 million of equipment andtrucks at a record-breaking auction in Denver, Colo., June11 to 12.

The two-day unreserved public auction set multiple site records, includ-ing total sales, online sales ($17 plus million), total number of buyers(1,000 plus), number of online buyers (480 plus), number of sellers (410plus) and number of lots sold (2,400 plus).

Crews Remove Debris Before It Becomes Health Hazard“We do have abandoned vehicles on the

street,” Readore. “We have big equipmenttrying to get it. We use 60 cubic yard trailersand a cherry picker or big clam shell grapple.It picks up material and loads it onto the trail-er. One grapple truck fills one trailer, then hegoes to the dump while the other truck cancontinue picking. When the first trailer getsback, the second is full, and it can go to thedump. The contractors have similar typeequipment. They have tandem trailers sothey can hold more material. They are paidby the yard so it behooves them to have alarge cavity or trucks with the capacity. Youload as much as you can as quick as you can.Just keep dumping and loading, dumpingand loading.”There’s good reason to work fast. Left on

the street too long, the debris could attractrodents, generate odors and in generalbecome a serious health hazard. The city has asked residents to segregate

the waste into separate piles, such as one justfor household hazard waste. But scavengerslooking for items that could be sold, weremessing up the piles and knocking thingsover. “We got with the Houston Police

Department and they are going to ramp up

enforcement and if they catch these guys,they are going to arrest them,” Readore said.“The material is our responsibility. In theareas where streets are blocked with cars thatgot flooded, the streets are congested. It’smaking it difficult for trucks to get downthere. And the scavengers are making it dif-ficult. There are challenges. We try to dealwith those as best as we can.”Meanwhile, the city is still trying to figure

out finances. It is estimated cleanup will costthe city between $15 to $20 million. And themoney will only come in after the invoicesgo out — nothing is coming in upfront,Readore said.Nor can they expect full reimbursement.“Previously, we got 100 percent reim-

bursement,” he said. “This time I believewe’ll get 75 percent. The city will have topay 25 percent. FEMA is not paying every-thing. Whereas with Hurricane Ike in 2008,we were able to get 100 percent. But afterHurricane Sandy and so many disasters,FEMA has looked at them and said theycan’t fund everything. It’s an issue forcities.”

(This story also can be found onConstruction Equipment Guide’s Web site atwww.constructionequipmentguide.com.) CEG

FLOOD from page 48

“There are pockets of neighborhoods in the southwest part of town that got hit thehardest, where they had 3 to 4 feet of water, Gary Readore, chief of staff of theHouston Solid Waste Management Department, said. “They had to pull all the car-pets, the furniture, the sheetrock. Some houses have piles of material just sittingoutside.”


To view our Business Calendar online, go to www.constructionequipmentguide.com.

AGC OF AMERICAAGC Safety and Health Committee Conference

Wednesday, July 8, 2015 to Friday, July 10, 2015Pittsburgh, PennsylvaniaSafety and Health

IT Forum ConferenceThursday, July 30, 2015 to Friday, July 31, 2015Chicago, IllinoisTechnology

For More Information on the above AGC of America Upcoming AGCEvents:Contact: 703/548-3118 (Phone) 703/548-3119 (Fax)AGC of America, 2300 Wilson Blvd., Ste. 300, Arlington, VA 22201

Kirby Smith Machinery, Inc. – Screen Maintenance SimplifiedSeminars The same seminar, but TWO (2) different dates to choose from:

FIRST SEMINAR:DATE: TUESDAY, JULY 14, 2015WHERE: HILTON GARDEN INN

1325 NORTH PALAK DRIVEFAYETTEVILLE, AR

TIME: 8:00 AM TO 1:00 PMA continental breakfast and lunch will be served.

SECOND SEMINAR:DATE: WEDNESDAY, JULY 15, 2015WHERE: HILTON GARDEN INN

19677 E. JACKSON DRIVEINDEPENDENCE, MO

TIME: 8:00 AM TO 1:00 PMA continental breakfast and lunch will be served.With regard to both seminars, this training will help you identify com-mon screening problems that affect production and/or quality, and pro-vide solutions. These seminars will be offered at no cost to you, but youmust register before July 3, 2015, to guarantee your spot! To viewmore details on the event and to register, please visit http://www.kirby-smith.com/custompage.asp?pg=screeningseminarregistration. KirbySmith Machinery, Inc. has been supplying innovative products to min-ing and aggregate producers for over 30 years. Kirby Smith Machinery,Inc. is a leading industrial, road building and construction equipmentdealer of cranes, excavators, dozers, pavers, boom trucks, backhoeloaders and other heavy equipment - with quality products selected fortheir dependability and performance and backed by manufacturer’ssupport. For more information about Kirby Smith Machinery, visitwww.kirby-smith.com. To discuss screen media challenges, call TomCostello at 314.265.8744, or email him at [email protected].

Minnesota Nursery & Landscape Association (MNLA)Garden Center Tour

Date: Tuesday, August 4, 2015Location: Farmington, MinnesotaTime: 9:00 AM Registration / Meet at

Bachman’s Cedar Acres

Minnesota Nursery & Landscape Association (MNLA) Garden Party

Date: Thursday, August 6, 2015Location: Long Lake, Minnesota

Minnesota Nursery & Landscape Association (MNLA)Member Appreciation Social in St. Cloud – FREE!

Date: Tuesday, August 11, 2015Location: St. Cloud, Minnesota Time: From 5:00 PM to 8:00 PM

FOR MORE INFORMATION ON THE ABOVE MNLA EVENTS, please contact MNLA at 651/633-4987/toll free: 888/886-6652. Fax: 651/633-4986/toll free fax: 888/266-4986.

Minnesota Nursery & Landscape AssociationMonday, July 20, 2015MNLA Night at the Saints GameLocation: St. Paul, MinnesotaTime: Pre-game picnic at 5:30 PM;

Game begins at 7:05 PMContact: MNLA office, Roseville, MN 55113Phone: 651/633-4987; Toll Free: 888/886-6652

Minnesota Nursery & Landscape AssociationTuesday, July 21, 2015Widmer Golf TournamentLocation: Oakdale, Minnesota Time: 11:00 AM Shotgun StartContact: MNLA office, Roseville, MN 55113Phone: 651/633-4987; Toll Free: 888/886-6652

Minnesota Nursery & Landscape Association (MNLA)Annual Bailey ExpoWhen: Thursday, July 30, 2015Time: 8:00 AM to 4:00 PMWhere: Bailey Nurseries, 1325 Bailey Road Newport, Minnesota55055Contact: Sue [email protected]: 651/768-3372Details: We have a jam-packed day planned, showcasing our farm andplants. Our expert staff will be on hand to show you our latest prod-ucts. Make sure to catch a tour of the farm throughout the day, and wewill be serving a delicious lunch. Manager’s Specials – Additional sav-ings on a great selection of plants! Displays, Seminars,Demonstrations & Tours:. Continental Breakfast served from 8 AM to 10 AM. Refreshments will be served all day, lunch served from 11:30 AM to1:30 PM. Plant health displays with staff on hand to answer your questions. New Variety Displays. HotPics Displays. Merchandising Displays

. Tours throughout the day

Minnesota Nursery & Landscape AssociationThursday, July 30, 2015Landscape Design TourAnnual Horticulture Night at the West Central Research andOutreach Center in MorrisLocation: Morris, MinnesotaContact: MNLA office, Roseville, MN 55113Phone: 651/633-4987; Toll Free: 888/886-6652

HCEA International Convention and Old Equipment ExpositionThe HCEA holds one annual convention and old equipment expositioneach year. Somewhere in either the lower 48 or Canada, we bringmembers, local fans, exhibitors, merchandise retailers and, of course,a lot of working machines together for learn and share a bit of history.Next SHOW:

AGC of MNSummer Quarterly Meeting 2015

When: Wednesday, July 15, 2015Where: Kitchi Gammi Club

831 Superior StreetDuluth, MN

Contact: Associated General Contractors of MinnesotaDenise Woods [email protected]: 651/796-2186

AGC of MNAGC of Minnesota Golf Tournament

When: Friday, August 7, 2015Time: 7:00AM Registration/Continental Breakfast

8:00 AM Shotgun Start (Scramble)1:00 PM Lunch, Awards, Door Prizes, Raffle

Where: Stonebrooke Golf Club2693 County Road 79Shakopee, MN

Contact: Denise [email protected]: 651/796-2186

Details: Registration: You can register 4 at a time. Early Bird discount: $150 per person (Register by July 20th). After July 20th: $175 per personBoth fees include driving range, breakfast, green fee, ½ cart, beverageson the course, lunch awards, and door prizes.Course dress code: collared shirts are preferred for men, no tank tops,golf or tennis shoes required. Lunch Only: $25 per person, includes meal and door prizes.

AGC of MNAGC of Minnesota CLC – St. Paul Saints Game

When: Tuesday, August 18, 2015Time: 5:30 PM to ???Where: New Saints Stadium

St. Paul, MNContact: Merry Beckmann

[email protected]: 651/796-2187

Details: The new Saints Stadium is open!Join your fellow CLC members at this networking only event onTuesday, August 18, in the Gallery (behind home plant). We will beginthe festivities at 5:30 PM followed by the 7:00 PM game. Would youlike to sponsor this event? Sponsorships are available for $200 andyour name will go on all the promotional pieces and help defray thecost of the tickets. Contact Merry if interested at 651/796-2187 [email protected]. Online registration is available after June15th at www.agcmn.org.

AGC of MNAGC of Minnesota – Sporting Clays Fundraiser

When: Monday, August 24, 2015Where: Minnesota Horse & Hunt Club

952/447-22723300 220th Street EastPrior Lake, MN 55372

Contact: Denise [email protected]: 651/796-2186

Registration details will be available in July.

LABOR DAY WEEKEND, SEPTEMBER 4 through SEPTEMBER 7, 2015 In conjunction with the Rock River Thesheree’s Annual Show atThresherman’s Park, 51 East Cox Road, off of US51 near Edgerton,Wisconsin.Please note, that the show days are Friday through Monday, not Fridaythrough Sunday. This is to conform to the hosting show’s schedule.Edgerton is approximately 55 miles southwest of Milwaukee, 90 milesnorthwest of Chicago, and 25 miles southeast of Madison. The showfeatures a tremendous variety of equipment and exhibits, including asteam pile driver, steam train, machine shop, sawmill, tractors, firetrucks, and, of course, threshing and traction engines.For more information, please contact:Historical Construction Equipment Association16623 Liberty Hi Road, Bowling Green, Ohio 43402Phone: 419-352-5616 – Fax: 419-352-6086General Requests, Memberships and Merchandise Orders:[email protected].

AEM MEDIA SERVICES presents BAUMA CONEXPO AFRICA BAUMA CONEXPO AFRICA will be held September 15 to 18, 2015 atthe Johannesburg Expo Centre in Johannesburg, South Africa.The show is owned and organized by the Association of EquipmentManufacturers (AEM) and Messe Munchen International (MMI). Exhibitspace sales are now open for Bauma ConExpo Africa 2015.Companies applying for space by February 12, 2015, will be includedin the first round of booth assignments. After that date, applications willbe accepted on a first come, first served basis. World-class exhibition in important marketplaceExhibitors at the last show pointed out the high quality of attendees.The 2015 show venue is the country’s largest purpose-built exhibitionand events facility, offering a modern space and services. And, showparticipants benefit from the global experience and customer service ofAEM, organizer of CONEXPO-CON/AGG, and MMI, organizer of BAUMA.BAUMA CONEXPO AFRICA has broad-based support from leadingindustry groups in Africa and worldwide. After 2015, the show goes toa three-year cycle in response to local and international industry input.AEM is show exhibitor contact for the Americas: visit the show website:www.bcafrica.com for more details. Contact AEM at [email protected] by telephone +1-414-298-4150/ toll free U.S. and Canada 800-867-6060.

BusinessCalendar

Bid Online at www.RollerAuction.com

INTERNET ONLY AUCTIONINTERNE UCY AT ONLT ONLY AINTERNE TIONUC

t wnline aBid O .RollerAwwt w omtion.cuc.RollerA


Sharon Driscoll Joins RitchieBros. as New Company CFOSharon Driscoll will be joining Ritchie

Bros. as chief financial officer, effective July6, 2015. Driscoll will have a key role on theexecutive team, partnering with the CEOand regional business unit leaders to reinvig-orate growth in revenue, earnings and cashflow. In particular, she will focus on drivinginitiatives to optimize the balance sheet withan emphasis on capital allocation, capitalstructure and improving returnon net assets to enhance share-holder value.“We’re very excited to wel-

come Sharon, a highly accom-plished CFO, to Ritchie Bros.Sharon’s business acumen,strategic thinking capabilities,M&A expertise, and significantexperience in capital allocationin multi-unit businesses willmake her an outstanding busi-ness partner in our journey toexecute the strategic plan and deliver theevergreen financial model over the longterm,” said Ravi Saligram, chief executiveofficer. “With a team-oriented, collaborativeapproach to management and a talent forcoaching future leaders, I’m confidentSharon will foster an even better understand-ing of financial metrics and drivers through-out the company, and enable our business todeliver superior results.”Driscoll has more than 17 years of senior

executive experience, overseeing financialoperations for large, multi-channel business-es. Most recently, she was executive vicepresident and CFO of Katz Group CanadaLtd. (more commonly known as Rexall), anational pharmacy retailer based in Canadawith more than 450 locations. In this role,Driscoll was responsible for all financialoperations, including: capital allocation andacquisition decisions, financing strategiesand treasury operations, regulatory compli-ance, risk management and financial talentdevelopment. During her time at Rexall,Driscoll championed the acquisition andintegration activity of independent pharmacybusinesses into the Rexall family of corpo-rate drug stores and strengthened financialgovernance over capital investment and allo-cation decisions.Prior to Rexall, Driscoll was senior vice

president and CFO of Sears Canada Inc., oneof Canada’s largest retailers. At Sears,Driscoll was responsible for all financialmanagement and oversight of the company’soperations, providing leadership and coordi-nation of the organization’s overall financialplans, policies and accounting practices.There, she successfully handled complex sit-uations and was responsible for buildingrelationships with external constituencies,

including shareholders, lending institutionsand regulatory bodies. While in her role,Sears Canada registered as a foreign privateissuer with the United States Securities andExchange Commission, established asecured revolving credit facility, andunlocked substantial capital through leasesurrender transactions. Prior to beingappointed CFO, Driscoll was SVP Finance

at Sears Canada.Driscoll also has held

numerous roles over a 20 yearcareer with LoblawCompanies Limited, a leadingCanadian grocery and fooddistribution company, includ-ing: SVP CorporateDevelopment, SVP Finance— National Merchandising,SVP Finance — OntarioDivision, and, VP Finance —Loblaws Supermarkets

Limited. During her time at Loblaws, she ledmajor transformation initiatives that central-ized processes and captured meaningful costsavings.Driscoll will be based in Vancouver and

will report directly to Ravi Saligram, CEO.“I am delighted to be stepping into this

role at such a great time for Ritchie Bros.,”said Driscoll. “Ravi and the leadership teamhave a clear and exciting strategic directionfor the business that builds on Ritchie Bros.’strong heritage and focuses on long-termshareholder value creation. I look forward tojoining the RBA family and contributing tothe company’s continued success.”Related to this announcement, Ritchie

Bros. announced that Rob McLeod, CFOsince 2008, will take on a new role as chiefbusiness development officer. McLeod’sdiversity of experience within Ritchie Bros.will be invaluable in pursuing the company’snew corporate strategy. Specifically, he willbe in charge of, and instrumental in, RitchieBros.’ M&A strategy — both in the evalua-tion of potential targets and the eventual exe-cution of the acquisition, as well as the inte-gration of new businesses into Ritchie Bros.’suite of services. In addition, Rob will pro-vide oversight to global sector championsfor the agricultural, transportation and oiland gas sectors to drive the transfer of bestpractices across geographies to acceleratepriority sector penetration. He also will over-see sales operations and sales support func-tions and partner with business unit heads toimprove sales productivity. McLeod willcontinue reporting directly to Ravi Saligram,CEO.


Crashes Have PronouncedImpact on Road Schedulesmargin for error for anyone to speed throughor lose focus.”Foss said that 41 percent of contractors

reported that motor vehicle operators or pas-sengers were injured during work zonecrashes this past year, and 16 percent ofthose crashes involved a driver or passengerfatality. Highway work zone crashes alsopose a significant risk for construction work-ers, Foss noted. He said 16 percent of workzone crashes injure construction workers and9 percent of those crashes kill them.Work zone crashes also have a pro-

nounced impact on construction schedulesand costs, Foss said. He noted that 26 per-cent of contractors reported that work zonecrashes during the past year have forcedthem to temporarily shut down constructionactivity. Those delays were often lengthy, as48 percent of those project shutdowns lastedtwo or more days.Association officials said that 69 percent

of contractors nationwide feel that tougherlaws, fines and legal penalties for movingviolations in work zones would reduceinjuries and fatalities. In addition, 80 percent

of contractors said that an increased use ofconcrete barriers will help reduce injuriesand fatalities. And 70 percent of contractorsnationwide agree that more frequent safetytraining for workers could help. They addedthat many firms and the association havecrafted these types of highway safety pro-grams.But Foss suggested that the best way to

improve safety was for motorists to be morecareful while driving through highway workzones. “With the summer travel seasons starting,

our message to every motorist is this: whenyou see construction signs and orange bar-rels, take your foot off the gas, put the phonedown and keep your eyes on the road,” Fosssaid.The work zone safety study was based on

a nationwide survey of highway construc-tion firms the association conducted inMarch and April of this year. More than 800contractors completed the survey nation-wide.


AGC from page 1

Safety Named Top Prioritysparked late last year when monitors detect-ed some settlement near the pit. Officialsmeasured 1 in. (2.5 cm) of settlement sinceNovember. They said they plan to expandthe overall monitoring program.Program administrator Todd Trepanier

said having reliable information is essentialto the decision-making process, and the stud-ies will help inform future decisions as theywork to replace the state Route 99 viaduct.“We all agree that public safety and pro-

tecting infrastructure are our top priorities,’’Trepanier said in a release. “This is anincredibly complex issue, but all of us — thestate, our contractor, the city — have ashared interest in reaching consensus andacting in the interest of public safety.’’Transportation spokeswoman Laura

Newborn said the department doesn’t have aset number for how much ground settlementwould be considered too dangerous to con-tinue. “It depends on where the settlementoccurs, what type of settlement it is — dif-ferential vs. uniform,’’ she said in an email.In addition to the damage to Bertha being

more extensive than thought, tunnel officialssaid the machine suffered some minor dam-age when it was taken apart. The outer seals

and steel retainers that hold them in placewere destroyed, they said. The cutter drivemotor also suffered damage, they said.Seattle Tunnel Partners also has decided

to replace the inner seals to make them morecompatible with the new outer seals and

easer to access if needed. The new seals weredesigned and made in Japan and are sched-uled to arrive in Seattle in late May, theysaid.The company will have a revised sched-

ule for the tunnel-boring machine by June,Newborn said.


BERTHA from page 1

“We all agree that publicsafety and protectinginfrastructure are our toppriorities.’’

Todd TrepanierWSDOT


ADVERTISER INDEX

The Advertisers Index is printed as a free editorial service to our advertisers and readership. Construction Equipment Guide is not responsible for errors or omissions.

ALLU GROUP ........................................................................17

ARTIC SNOW & ICE CONTROL PRODUCTS......................19

ATI CORPORATION/LEVEL-BEST........................................18

BAIR PRODUCTS INC ..........................................................13

BARGAINS..............................................................................43

BID SPOTTER........................................................................49

CATERPILLAR INC ..........................................................38,39

CEG SCALE MODELS ..........................................................12

CLASSIFIEDS ........................................................................43

CONSTRUCTION EQUIPMENT GUIDE ..........................14,44

DOOSAN INFRACORE AMERICA CORP ............................34

DOOSAN PORTABLE POWER ............................................20

DYNAPAC ..............................................................................25

EQUIFY AUCTIONS LLC

CISCO TX 7/30 ..............................................................53

FELLING TRAILERS ..............................................................31

FLANGE LOCK ........................................................................8

FLECO ATTACHMENTS ........................................................16

FLUID CONTROL SERVICES ..............................................13

GRINDERCRUSHERSCREEN.COM ....................................36

GROVE CRANE CO-OP ........................................................24

HELAC CORPORATION ........................................................18

HENDRIX MACHINERY LLC ..................................................3

HYDRAULICIRCUIT TECHNOLOGY ....................................17

ICUEE ......................................................................................2

IROCK CRUSHERS ..............................................................40

IRONPLANET

7/9,16,23,30 ....................................................................47

KAWASAKI CONSTRUCTION MACHINERY........................21

KIRBY-SMITH MACHINERY INC ..........................................56

KOBELCO ..............................................................................33

KOMATSU AMERICA CORP ......................................6,7,22,23

KPI-JCI ....................................................................................40

LIEBHERR CONSTRUCTION EQUIPMENT ..........................9

LINK-BELT EXCAVATORS................................................28,29

LIUGONG CONSTRUCTION MACHINERY ........................11

MAXIMUM CORP ..................................................................13

METSO MINERAL SCREENING ..........................................37

METSO MINERALS CRUSHING ..........................................42

NATIONAL ATTACHMENTS ..................................................19

NORAM..............................................................................26,27

RANSOME EQUIPMENT SALES LLC ..................................44

REMU SCREENING TECHNOLOGY....................................36

RITCHIE BROS AUCTIONEERS ..........................................55

ROAD BUILDERS MACHINERY & SUPPLY ....................5,17

ROLLER & ASSOCIATES AUCTIONEERS

COLORADO SPRINGS CO 7/16 ..................................51

SANDVIK MINING & CONSTRUCTION................................18

SCHAEFER ENTERPRISES ................................................19

SENNEBOGEN ......................................................................41

STOLTZ MFG LLC....................................................................8

THE SCREEN MACHINE ......................................................38

VOLVO CONST EQUIPMENT & SERVICES (VCES) ..........32

WSM AUCTIONEERS

PHOENIX AZ 7/11 ..........................................................49

To read articles about these CEG advertisers, visit www.constructionequipmentguide.com


Unreserved public equipment auctions

39,330+ items in 90+ auctions including

rbauction.com

Special limited-time financing offer! No payments for 90 days*

ed-time finl limitaiSpec

Unr

ing offanced-time fin

lic equipment auctionsbued pvved pserrverr

s fmentyaer! No p off ffer! No p

lic equipment auctions

syysaor 90 d f for 90 d *

lic equipment auctions

3C | Midlar 96llerpiat2 of 3 – C

and3C | Midl erpiat7 C200

ands III | MidlSerieXL ar D6R ll

orar 950H | Fllerpiat2 – 2006 C

at1 of 4 – 2009 Cs AngoLthorWt or

onTTonar 775F 70 llerpiatseles Ang gele

ar 140M llerpiat2008 C

seles Ang geleoVHP | Lar 140M

e 300D hn Deer11 Jo20

itys Caanss II | KSeriee 300D

eerreT800 w/T Terth orwen13 K20andMidl

onTToner 6000 60 vsosorx Ceand

XL | Far D6T llerpiat12 C20

thorWt orXL | F

ar 4llerpiat2006 C

ems in 90+ auctions inc39,330+ itand, TXMidl

, MOity CsaansK

sliahehT 4x4 | CS30Ear 4

ludingems in 90+ auctions inc9lJu

21lJu, ILoaghicC

on, NDtsliliW

heh-3 | CCZX450Lhi ac7 Hit200

luding 30lJu

Aug 5PhoeniA

sliaheherpiat14 C1 of 3 – 20

estechnMa

Sep 2x, AZPhoeniSep 30que, NMuquerblA

ar 312Ellerpireste ar D6R llerpiatC

Sep 2Sep 30

or son perin Bid idm bNo minimu▸

seles Ang geleos II | LSerieXL

lineonsee pricvsere or rsid

rv ff

JuTXth, orWtorFs, CAele AngsoL, NHertsheancMAs, W WAalihehC

ompanCion ctAuam # 6018, ahGrh utc E. R. Ber ionectAu License #153 err License #1539, ale DelehicVVehicorotLicense # 1981, M

erklCion ctAu. a) Inc (AmericserrsionectAu. sorrohie BitcRey Bond # 0470729, orr John Kerr John KionectAuam Bond # 0470726, ahGr

ompanCion ctAuh # 441.000865, g M. HighsmiteGrey Bond # 0470729orr John Kerr John KionectAuh Bond # 0470728, HighsmitvSeralianc. Finsorhie Bitcom Rfrrom Rerfferime of*Limited-t

3 22–2l4 2lJu

28lJu30lJu

, FLandoOrlon, CATipt

t, MDsath ENorrth Es, NVaegaVsLa

a) Inc (AmericserrsionectAu. sorrohie Bitcy Bond #0470724 RompanionectAu. sorhie Bitcion Firm License # 444.000193, RctAu License #1539,

ctAuU3889, A # vecc # aor J. Morr J. MevrTerionectAu License #225, rkk License #225, # 606 Lic c # 6065, smeierr LicliV R. kk R. ederic Fr redericerr FrionectAuey Bond # 0470729,

ctAu License #1539, err License #1539, ale DelehicVVehicoroty License # 1981, Mompaney Bond # 0470729

ancom/finion.ccte rbauSe. ply apionsondit & cermsTTermsC. A. Oicesvi

Aug 13Aug 26Aug 27t, MDAug 28s, NV

ElSpecfinNo p

yompanCion ctAu License #225, erkk License #225, lCion ctAu. a) Inc License #225,erkk License #225,lCion ctAu. a) Inc (Americserione

die R. Ederr EdionectAu License #AB303, sinessuion BcterionectAu # 3078, uqua Lic. FSory geGrerionectAu # 6065,

geGrerionectAuey # 829, orre John L. Kerr John L. Kionect

g.inanc

OctTX, soa PEled-timelimitl aiSpecerofffering ancfin

syaor 90 d f for 90 dmentsyaNo p *

& auction l luffuSee

21 pect and instt and insseTTe▸buo the pOpen t▸

added ems ite Morling: sel aboutlalC

ats tinggs sliequipment &

eits on-tt on-ationrrationtsegiee rrlic, fb

lyaidadded 31.39811.800.2

omauction.crb


Abilene • Amarillo • Dallas • Ft. Worth • Kansas City • Lubbock • Odessa • Oklahoma City • St. Louis • Tulsa

Contact Rick Nielsen for details and pricing.800.375.3339 www.kirby-smith.com

Follow us on

All sales are subject to availability at time of order, prices do not include taxes or other applicable fees. Kirby-Smith Machinery Inc. doesn’t engage in exports to embargoed countries. Sold As Is Where Is.

Sales • Rentals • Parts • Service • Financing

west 13 2015

Documents