weldor cnc machinesweldorpunchpress.com/pdf/stock_list_weldor_cnc...1. amada cnc press brake – rg...
TRANSCRIPT
WELDOR CNC MACHINES
Mail: - [email protected]
Mobile Number: - +91 83061 84061 / +91 92277 55528
Web1:- www.weldorcncmachines.com Web2:- www.weldorpunchpress.com
Address: - Survey No.240, Behind Giriraj Weigh Bridge, VERAVAL (SHAPAR),
Rajkot - 360024, Gujarat, India
Dear Sir,
We invite your kind attention to your interest of below machines
and discussion for the same.
In this context, we have to inform you that we can offer some of machines
either from ready stock or early delivery. The list of machines and details
are enclosed here with.
` We further pleased to inform you that we can offer most
lucrative offer for these machines, which are ordered and can be
dispatched as soon as possible on first come first serve base.
You are aware the G.S.T. is refundable and also government has declared
subsidy for new upcoming industries.
We hope you will take advantage of higher discount and early delivery to
enable you to start up production,
We now look forward to receive your response in return.
Thanks & best regards from,
WELDOR CNC MACHINES
Director: - Mr.Mahesh G.Vaghela
Contact: - Mr.Keyur .B.Pandya +91 83061 84061
Mail: - [email protected]
Web1:- www.weldorcncmachines.com Web2:- www.weldorpunchpress.com
WELDOR CNC MACHINES
Mo.No. 92277 55528 / E-mail ID :- [email protected] / Web :- www.weldorcncmachines.com
Machines Stock List From Quick Delivery Schedule
SR NO. DESCRIPTION CAPACITY CATEGORY
1 RG 100 100 TON AMADA USED CNC PRESS BRAKE
2 HFE 1303 130 TON AMADA USED CNC PRESS BRAKE
3 ARIES 255 20 TON 50 X 50 INCH AMADA USED TURRET PUNCH PRESS
4 VIPROS 357 30 TON 50 X 70 INCH AMADA USED TURRET PUNCH PRESS
5 COMA 555 50 TON 50 X 50 INCH AMADA USED TURRET PUNCH PRESS
6 3100 × 5 mm 120 TON CNC PRESS BRAKE 4 AXIS
7 3100 × 6 mm 150 TON CNC PRESS BRAKE 4 AXIS
8 3100 X 8 mm 200 TON CNC PRESS BRAKE 4 AXIS
9 3100 × 5 mm 120 TON CNC PRESS BRAKE 9 AXIS
10 3100 × 4 mm 100 TON ECONOMIC SERIES CNC PRESS BRAKE 3 AXIS
11 2500 × 4 mm 80 TON ECONOMIC SERIES CNC PRESS BRAKE 3 AXIS
12 3100 × 6 mm 150 TON ECONOMIC SERIES CNC PRESS BRAKE 3 AXIS
13 2500 × 4 mm 80 TON HYDRAULIC PRESS BRAKE
14 3100 × 4 mm 100 TON HYDRAULIC PRESS BRAKE
15 2500 × 4 mm 4 MM HYDRAULIC SHEARING
1. AMADA CNC PRESS BRAKE – RG 100 (USED)
Model RG 100
Capacity 100 tons
Max. bend length 3000 mm
Distance between uprights 2550 mm
Depth of throat 400 mm
Back gauge adjustment 600 mm
Distance between table and ram 300 mm
Motor 15 HP
Nos. of Axis 2 – X AND Y
CNC System New Cybelec controller
2. AMADA CNC PRESS BRAKE – HFE 130-3 (USED)
Model HFE 1303
Year of mfg 2004
Capacity 130 ton
Bending length 3100 mm
No.of Axes 8 - Y1, Y2, X1,X2, R-1,R2 Z1,Z2
Controller Cybelec (new)
Power required 10 H.P.
3. AMADA TURRET PUNCH PRESS – ARIES 255 (USED)
Model Aries 255
Press capacity 20 tons
Max. work sheet size 1250 x 2540 mm
Carriage (X axis) travel 1270 mm
Table (Y axis) travel 1290 mm
Press stroke 32 mm
Max. punching hit rate 100 hits/min.
Press motor 5.5 KW
No. of turret stations 30
No.of station A = 16 nos.
No.of station B = 10 nos (includes 2 auto index)
No.of station C = 2 nos
No.of station D = 2 nos
Required power supply 14 KVA
Controlled axis X, Y, T & C
Specifications- model SIEMENS CONTROLLER
Specifications subject to verification
4. AMADA TURRET PUNCH PRESS – VIPROS 357 (USED)
Model VIPROS 357
Capacity 30 tons
Table size 1250 mm x 1800 mm
Max.sheet size (with reposition) 1250 mm x 3600 mm with reposition
No. of stations 58 nos with 2 auto index
No.of station A -36 nos
No.of station B – 12 nos
No.of station C - 4 nos
No.of station D - 2 nos
No.of station E - 2 nos
No. of station B – 2 nos. Auto index
Table traverse speed 2000”/min
Turret rotation speed (bi-directional) 30 RPM
Drive motors A.C. Servo
Control axis 4 nos - X, Y, T & C
Stroke per minute 180 SPM (25.4 mm increment)
Nibbling. hit rate 200 HPM
No. of work clamps 2 nos.
Electric power required 35 KVA
Controller NEW CONTROLLER.
5. AMADA TURRET PUNCH PRESS – COMA 555 (USED)
Model COMA 555
Press Capacity 50 tons
Max. sheet size (WITH AUTO REPOSITIONING) 1250 mm x 2540 mm
No. of stations 46 nos
No. of station A A-24 nos
No. of station B B – 12 nos
No. of station C C -4 nos
No. of station D D -3 nos
No. of station E E -2 nos
F station 150 mm F -1 nos
Table traverse speed 2000”/min
Turret rotation speed (bi-directional) 30 RPM
Drive motors A.C. Servo
Control axis 3 nos - X, Y, T
Stroke per minute 180 SPM (25.4 mm increment)
Nibbling. hit rate 200 HPM
No. of work clamps 2 nos.
Electric power required 20 KVA
CNC SPECIFICATION
Controller FANUC 18P CNC Controller
6. CNC PRESS BRAKE 4 TO 9 AXIS WITH CNC CROWNING (NEW)
7. ECONOMICAL SERIES CNC PRESS BRAKE 3 AXIS WITH MANUAL CROWNING
8. HYDRAULIC PRESS BRAKE (REAR CYLINDER) NC / DRO CONTROLLED
9. HYDRAULIC SHEARING MACHINE (VARIABLE RAKE ANGLE) NC / DRO
