welding in this section - · pdf filewelding in this section 194 ... gas tungsten-arc welding...

Welding In This Section

194

In This Section

Headgear . . . . . . . . . . . . . . 195-197

Eye/Face Protection . . . . . 198-199

Respirators. . . . . . . . . . . . . 200-202

Gloves . . . . . . . . . . . . . . . . 203-206

Clothing . . . . . . . . . . . . . . . 207-208a number of different applications, your best bet is an auto-darkeningshade, which will adjust to the correct darkness for your particular process.

Gloves

• Arc welding gloves are padded and made from various grades of leather toprovide both heat, spark and abrasion protection.

• MIG/TIG welding gloves have no padded liner for heat, but focus on givingthe worker excellent dexterity while welding.

Clothing

• In most welding applications, it is critical to have allexposed skin covered during the welding exposure toprevent burns to the skin.

• Leather aprons and sleeves provide excellent durability during all welding activities

• Flame-resistant coveralls offer best protection foryour body and keeps street clothes from beingdamaged.

Respirators

• Welding fumes can be extremely dangerous tobreath without good ventilation or proper respiratory protection.

• We offer disposable respiratorsthat are made

specifically forwelding applications.Common feature of awelding respiratorinclude: aflame-retardantshell, charcoaladditive forodors, exhalation valve andadjustable straps.

Choosing the RightProtective EquipmentWhen WeldingMany of the health hazards from welding, cutting, andbrazing operations can be controlled with proper workpractices and personal protective equipment.

Welding Helmets

• A progressively darker lensshade number is requiredbased on the intensity ofthe infrared light exposure.

• If you are always usingthe same arc weldingprocess on the samematerial, a fixed shaded welding lensis sufficient. But if youare using a variety ofmaterials and welding

Filter Lens Shade Number Guide

Welding Operation Shade NumberShielded Metal-Arc Welding, up to 5⁄32" Electrodes 10Shielded Metal-Arc Welding, 3⁄16" – to 1⁄4" Electrodes 12Shielded Metal-Arc Welding, over 1⁄4" Electrodes 14Gas Metal-Arc Welding (Non-Ferrous) 11Gas Metal-Arc Welding (Ferrous) 12Gas Tungsten-Arc Welding 12Torch Brazing 3 or 4Light Cutting, up to 1" 3 or 4Medium Cutting, 1" – 6" 4 or 5Light Gas Welding, up to 1⁄8" 4 or 5Medium Gas Welding, 1⁄8" – 1⁄2" 5 or 6

www.mathesongas.com • 877-684-4427

Headgear Welding Protection

195

Increased Coverage forLower Neck from Heatand Welding Sparks

Optional Side Windows fea-ture Shade 5 protection andwiden your field of vision,enabling you to be more

aware of nearby machineryand potential hazards.

IncreasedCoverage for Earand Side of Neck

Ratchet mechanismallows for

precise tighteningcontrol.

Front of the headband adjuststo match your forehead.

Back portion ofthe headbandswivels andadjusts to fit

different headshapes.

A snap adjustment allows you to setthe helmet at 9 different angles.

Adjustable crown snapsprovide increased

helmet stability and better weight distribution.

Auto-darkening welding filter with superior optical

performance enables constant, comfortable vision.

Speedglas™ 9100 Series Welding HelmetsSpeedglas 9100 Welding Helmets will fundamentally change not only howyour workers wear their welding helmets, but also how they experience the helmet’s fit, stability and balance. A lower center of gravity makes thehelmet more stable in both the up and down positions, as well as reducingleverage strain on your neck. Helmets can be used with all stick, MIG andTIG processes. They also offer grinding and torch-cutting modes.• 9100V offers shades 5, 8 – 13• 9100X offers shades 8 – 13• 9100XX offers shades 8 – 13• Standard Outside Protection Plate is designed to protect the filter

from spark and spatter.• Scratch-Resistant Outside Protection Plate is hard coated and

available for use in demanding environments to help resist scratching,abrasion and spark and spatter. This option is standard on all new 9100 helmets.

• High-Temperature Outside Protection Plate is formulated from anengineered resin to resist higher heat applications. This is recommendedfor use in high amperage welding or conditions where long weld beadsmay generate radiant heat.

• Inside Protection Plate is designed to protect the inside surface of thefilter from spark and spatter.

• Starter Kit includes 5 Outside Protection Plates, 2 Inside ProtectionPlates and a Sweatband.

• Sweatbands are designed to absorb sweat and allow for comfortablewearing of the headgear

Welding Helmets Viewing Area73350 9100V 6.05 Sq. Inch $489.2573353 9100V with Side Windows 6.05 Sq. Inch 525.0073351 9100X 9.12 Sq. Inch 633.4573354 9100X with Side Windows 9.12 Sq. Inch 668.0073352 9100XX 12.11 Sq. Inch 777.6573355 9100XX with Side Windows 12.11 Sq. Inch 654.60

Outside Protection Plates, 10/Case73356 Standard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42.4573357 Scratch-Resistant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83.9073358 High-Temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72.40

Inside Protection Plates, 5/Case73360 For 9100V . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14.7073361 For 9100X . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16.4573362 For 9100XX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18.30

Starter Kits73363 For 9100V . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36.0073364 For 9100X . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36.8573365 For 9100XX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37.85

Accessories73359 Sweatband, 3/Case . . . . . . . . . . . . . . . . . . . . . . . . . . . 27.5573366 Replacement Silver Front Panel. . . . . . . . . . . . . . . . . . 27.5573367 Replacement Headband Including Assembled Parts 34.80

Failure to use an Inside or Outside Protection Plate with the filter voids thewarranty if spark or spatter cause damage to the glass.


196

Welding Protection Headgear

HSL 100 EQC®

Welding HelmetState-of-the-art technology makes this helmet ideal for extremeenvironments. The auto-darkening filter offers variable shadesfrom 9 – 12 and remains at shade 4 in normal light. Sensitivityadjustment allows user to adjust the unit depending on ambientlight or arc intensity. Delay adjustment controls the amount of time that the lens will staydark after you have stopped the arc. This is beneficial when making several consecutivewelds in the same area. Viewing area measures 13⁄4"W X 33⁄4"L. Hard Hat Mounting Kitsecurely attaches a welding helmet to a hard hat and keeps the helmet in any position.Requires 2 AAA batteries (included).

Halo X Nexgen EQC®

Carbon Fiber Welding HelmetThis helmet features four sensors in a staggered design toeliminate blocked sensors, a Smart View LCD for fingertipcontrol adjustments, and an easy-to-read digital readout. The auto-darkening filter offers variable shades from 9 – 13 for welding, shade 5 for torch welding and shade 3 for grinding. Sensitivity adjustmentallows user to adjust the unit depending on ambient light or arc intensity. Delayadjustment controls the amount of time that the lens will stay dark after you havestopped the arc. This is beneficial when making several consecutive welds in thesame area. Unit detects welds less than 5 amps, making it ideal for low-amp TIGwelding. Viewing area measures 23⁄8"W X 33⁄4"L. Hard Hat Mounting Kit securelyattaches a welding helmet to a hard hat and keeps the helmet in any position.Requires lithium batteries (included).

26933 HSL 100 EQC Welding Helmet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $299.9526942 Hard Hat Mounting Kit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13.4526937 Lens Replacement Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10.7026939 Replacement Headgear . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18.35

26934 Halo X Nexgen EQC Welding Helmet. . . . . . . . . . . . . . . . . . . . . . . . . . . . . $526.4526942 Hard Hat Mounting Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13.4526938 Lens Replacement Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12.9526939 Replacement Headgear. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18.35

100 Series Welding HelmetThis helmet with auto-darkening filter is is good for stick, MIG and most TIGwelding processes. The filter has three sensitivity settings: a normal setting formost types of indoor and outdoor welding, a setting for when other welders areworking nearby, and a setting for low-current or stable arc welding. Unit offersuser-selectable shades of 8 – 12 and a viewing area of 6.05 square inches. Thefilter is shade 3 in the light state. This product will ship separately, directfrom the manufacturer.

74024 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $249.05


26932 Nitro Welding Helmet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $189.5026942 Hard Hat Mounting Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13.4526936 Lens Replacement Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8.3526939 Replacement Headgear . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18.35

Headgear Welding Protection

197

Nitro™ Welding HelmetThis solar-powered helmet offers outstanding features at an economical price point.Lightweight unit weighs only 1 pound fully assembled. The auto-darkening filter offers variable shades from 9 – 13. Sensitivity adjustment allows user to adjust the unit dependingon ambient light or arc intensity. Delay adjustment controls the amount of time that the lens will stay dark after you have stopped the arc. This is beneficial when making severalconsecutive welds in the same area. Viewing area measures 42mm X 96mm. Hard HatMounting Kit securely attaches a welding helmet to a hard hat and keeps the helmet in any position.

Shadow™ Welding HelmetThis helmet’s narrow shell design is perfect for work in tight spaces, and the extendedfront increases throat protection against sparks, slag and fumes. Helmet can also standup to radiant heat of 350°F, a minimum 50% improvement over most other thermoplasticshells. Unit comes complete with cover plate and shade 10 polycarbonate filter plate.The shade 10 filter measures 51⁄4”H X 41⁄2”W. Hard Hat Mounting Kit securely attaches a welding helmet to a hard hat and keeps the helmet in any position.

26930 Shadow Welding Helmet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $46.3526942 Hard Hat Mounting Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13.4526937 Lens Replacement Kit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10.7026939 Replacement Headgear . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18.35

Element Welding HelmetThis solar-powered unit is ideal for MIG, TIG and stick welding. The shell weighs only 6ounces and is designed to eliminate hot embers from sitting on it. The auto-darkening filteroffers variable shades from 9 – 13 and remains at shade 4 in normal light. Delay adjust-ment controls the amount of time that the lens will stay dark after you have stopped thearc. This is beneficial when making several consecutive welds in the same area. Viewingarea measures 42mm X 96mm. Lens Replacement Kit includes five front and two rearprotective plates.

26931 Element Welding Helmet. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $139.9526935 Lens Replacement Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10.4526940 Replacement Headgear . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10.95


Crews Storm™

Jackson Safety® OTG

Uvex® XC

Uvex® Genesis®

3M™ Lexa™

198

Welding Protection Safety Glasses

Welding Safety GlassesWelding Safety Glasses protect your eyes against ultraviolet and infrared radiation generated when working with molten metal, and in welding, cutting, soldering and brazing operations. Meets ANSI Z87.1-2003 high impact standard.• SCT Low IR Lens reduces glare from fluorescent and halogen lighting.• Green Shade 2.0 Lens is used for torch soldering.• Green Shade 3.0 Lens is used for torch brazing and cutting.• Green Shade 5.0 Lens is used for gas welding.

• Uvex XC Glasses are ergonomically balanced for extra comfort and feature a 9-basewraparound lens for extra cheek and peripheral coverage. Flexible nose fingers fit avariety of nasal profiles. Replacement lenses are available.

• Uvex Genesis Safety Glasses are engineered with an innovative molding process thatactually allows the frame to serve as a shock absorber that can diffuse and deflectimpact. A ventilation channel between the frame and brow bumper directs airflowunder the lens to reduce moisture build-up and fogging. Replacement lenses are available.

• Uvex Astrospec 3000 Safety Glasses feature adjustable temples and lens inclinationto produce a custom fit. Replacement lenses are available.

• Uvex Horizon Safety Glasses feature a classic flip-up style that offers versatility for a variety of environments. This flip-up is perfect for welders and industrial workers whorequire a shaded lens while working with high-intensity light sources and a traditionalclear polycarbonate lens when their task is complete.

• 3M Lexa Minimizer Eye Gear provides a functional lens that’s not too dark and nottoo light, but which helps protect from some infrared radiation. Lens doesn’t distortcolor like green shaded lenses and it reduces infrared radiation by 65%. Eyewear also features adjustable-length spatula temples and lens angle adjustment for maximum comfort.

• Crews Storm Safety Glasses feature a bayonet temple with ratchet adjustable lensinclination and non-slip head grips.

• Jackson Safety OTG Safety Glasses fit over most prescription glasses. Integralsideshields offer added protection.

Can’t find what you’re looking for? Visit our website for an expanded selection of lens colors, frame colors, replacement lenses and similar brands.

Uvex® Astrospec 3000™

Uvex® Horizon

Lens Color Frame Color Lens Coating 1-9 10+Uvex XC59360 Yellow SCT Low IR Black Anti-Fog and Anti-Scratch $12.25 11.6558856 Green Shade 2.0 InfraDura Black Anti-Scratch 15.50 14.7558857 Green Shade 3.0 InfraDura Black Anti-Scratch 15.75 15.0058858 Green Shade 5.0 InfraDura Black Anti-Scratch 16.55 15.75

Uvex Genesis58083 Green Shade 2.0 InfraDura Black Anti-Scratch 14.95 14.2558084 Green Shade 3.0 InfraDura Black Anti-Scratch 14.95 14.2558085 Green Shade 5.0 InfraDura Black Anti-Scratch 16.25 15.45

Uvex Astrospec 300072752 Green Shade 3.0 InfraDura Black Anti-Scratch 13.85 13.2072753 Green Shade 5.0 InfraDura Black Anti-Scratch 14.20 13.50

Uvex Horizon74191 Green Shade 3.0 InfraDura Black Anti-Scratch 36.40 34.6074192 Green Shade 5.0 InfraDura Black Anti-Scratch 38.20 36.30

3M Lexa Minimizer55308 Minimizer, Medium Black Anti-Fog and Anti-Scratch 12.10 11.5055309 Minimizer, Large Black Anti-Fog and Anti-Scratch 11.65 11.10

Crews Storm53370 Green Shade 3.0 Black Anti-Scratch 7.85 7.5053369 Green Shade 5.0 Black Anti-Scratch 7.55 7.20

Jackson Safety OTG28412 Clear Black Anti-Fog & Anti-Scratch 7.85 7.5028413 Green Shade 5.0 Black Anti-Scratch 14.65 13.95


Faceshields & Goggles Welding Protection

199

BionicFaceshieldBetter OverallCoverageRedefine protection, visibility and comfort with the BionicFaceshield. Unit is designed for protection against impact, liquidsplashes and welding hazards. Faceshield is lightweight and com-fortable, so it can be worn all day for applications such as grinding,sanding, woodworking, spray painting, etc. Premium featuresinclude built-in chin protection, extended top-of-head coverage anda ratcheting headgear mechanism. Unit can be worn with gogglesor a respirator. Meets ANSI Z87.1-2003 high-impact standard.

F-500 FaceshieldF-500 Faceshields are molded from Noryl to be stronger, moredurable and more heat resistant than smaller faceshields made withordinary material. Broad and deep 7" crown protector provides anextra measure of protection in harsh conditions. Channel grip system locks windows in place in a deep recessed channel to forma perfect seal from dust, dirt and debris. Includes Fibre-Metal 3-Cfree-floating headgear. Choose Clear Window or tinted Shade 5 Window for welding applications. Faceshield andWindow sold separately.

1-9 10+A. 58357 F-500 Faceshield . . . . . . . . . . . . . . . . . . . . . . $30.55 29.05

58358 Clear Window . . . . . . . . . . . . . . . . . . . . . . . . . 12.90 12.3058359 Shade 5 Window . . . . . . . . . . . . . . . . . . . . . . 28.40 27.00

A

Flex Seal GoggleOutstanding Fog CoatingThese silicone frame goggles stay soft and supple in both hotand cold temperatures. Silicone frame also conforms to anyfacial profile and provides a tight seal to increase eye protection.Uvextreme® anti-fog coating and indirect venting system minimize fogging. Goggles feature a neoprene band (except59269) and fit over virtually all prescription eyewear. Meets ANSI Z87.1-2003 high-impact standard.

Navy Frame 1-9 10+59268 Clear Anti-Fog Lens . . . . . . . . . . . . . . . . . . . . $15.75 15.0059269 Clear Anti-Fog Lens, Fabric Band . . . . . . . . . 16.20 15.4059270 Grey Anti-Fog Lens . . . . . . . . . . . . . . . . . . . . 16.55 15.75

Black Frame59271 Shade 3 Anti-Fog Lens. . . . . . . . . . . . . . . . . . 19.25 18.3059272 Shade 5 Anti-Fog Lens. . . . . . . . . . . . . . . . . . 20.35 19.35

Replacement Lenses59273 Clear . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7.75 7.4059274 Grey . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8.35 7.95

MonoGoggle XTR FaceshieldThis unit combines goggles and a faceshield to offer full-face protection from chemicals and impact. The curved polycarbonatefaceshield conforms to the shape of the face, offering better protection. Goggle fits over most prescription eyewear. The shieldcan be detached from the goggle. Choose MonoGoggle withShade 3.0 and Shade 5.0 Lenses for welding applications. MeetsANSI Z87.1-2003 high-impact standard.

1-5 6+28407 MonoGoggle with Clear Lens . . . . . . . . . . . . . . . $22.95 21.8528408 MonoGoggle with Shade 3.0 Lens. . . . . . . . . . . 30.95 29.4528409 MonoGoggle with Shade 5.0 Lens. . . . . . . . . . . 30.95 29.45

1-9 10+59260 Faceshield with Clear Uncoated Visor . . . . . $35.80 34.0559261 Faceshield with Clear Hardcoat

Anti-Fog Visor . . . . . . . . . . . . . . . . . . . . . . . . 53.50 50.85

Replacement Polycarbonate Visors59262 Clear Uncoated. . . . . . . . . . . . . . . . . . . . . . . 8.55 8.1559264 Clear Hardcoat Anti-Fog. . . . . . . . . . . . . . . . 27.45 26.1059265 Shade 3.0 Uncoated. . . . . . . . . . . . . . . . . . . 28.90 27.5059266 Shade 5.0 Uncoated. . . . . . . . . . . . . . . . . . . 33.15 31.50


5400 Series Respirator withWelding AttachmentThis respirator provides comfort andprotection at an unbeatable price.Respirator is constructed of thermalplastic elastomer, so it’s lightweight(14 ounces) and long-lasting. Hard-coated polycarbonate lens isscratch resistant and has a field ofvision of over 200°. WeldingAttachment is constructed of a fire-resistant thermoplastic materialthat can be lifted upward on a locking hinge for a wide-angle view

of the work area. Lens meets ANSI Z87.1-2003 standard forimpact and penetration. Respirator comes with 3 peel-away windows, 6 respirator wipes and 1 storage bag.

200

Welding Protection PAPR/Respirator

Adflo™ Welding PAPR3M™ Adflo™ Powered Air Purifying Respirator (PAPR) is a compact and lightweight system for welders. The high-efficiency particulate filter can be “stacked”onto an optional Organic Vapor/Acid Gas Cartridgefor additional protection against organic vapors and acid

gases. The slim profile is designed to go into tight spaces. NiMH battery charges in lessthan 3 hours with a smart charger that won’t ever overcharge. Audible and visual alarmssignal low airflow and low battery charge. Turbo filter cover holds spark arrestor, prefilterand high-efficiency particulate filter.

With user-selectable dark shades from 9 – 13, the 3M™ Speedglas™ 9002X FlexViewHelmet is ideal for welders who use a variety of arc welding processes and amperages.This model has clear, sharp optics and consistent shading across its entire 4.09” X 2.12”viewing area. The FlexView system allows the spring-mounted filter to be lifted up whenuser is not actively welding, allowing the user to see out of the clear faceshield. Side windows increase peripheral vision by 100%. A solar panel on front of the filter cassettehelps power the unit, extending battery life to approximately 3,000 hours. Unit’s detectorshave increased sensitivity to provide reliable switching for a wide range of welding methods, even extremely stable arcs like those from TIG inverters at low amp settings.Helmet has a new delay that allow the user to select how quickly the filter changes fromdark-to-light.

3M offers dozens of Welding PAPR configurationsfor virtually any welding application. If you’re looking for a specific style, just give us a call

and we’ll be happy to find it for you.

1-5 6+53217 Small . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $134.40 127.7053216 Medium/Large . . . . . . . . . . . . . . . . . . . . . . . . . 134.40 127.7053218 Welding Attachment*. . . . . . . . . . . . . . . . . . . . 239.15 227.2089911 P100 Filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10.25 9.7580535 Pancake P100 Filter . . . . . . . . . . . . . . . . . . . . . 7.40 7.05

* Welding Attachment does not include shaded lens.

31820 PAPR with 9002X Flexview Helmet . . . . . . . . . . . . . . . . $2,066.90Cartridges and Filters31644 Prefilter, 6/Pkg. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16.5031646 High-Efficiency (HE) Filter, 2/Pkg. . . . . . . . . . . . . . . . . . 109.7531645 Organic Vapor/Acid Gas Cartridge, 2/Pkg. . . . . . . . . . . 144.95


Cool Flow™Exhalation Valve

AdjustableStraps

Cake-ResistantFilter Media

M-Noseclip

Advanced Electret Media

Welding Approved RespiratorsThe use of N-Series Respirators is typically limited only by hygiene,damage and increased breathing resistance. However, when workingin very dirty or dusty workplaces that may result in high filter loading(200 mg), service time should be limited to 8 hours of continuous orintermittent use, unless an evaluation is done to prove that extendeduse will not significantly degrade efficiency levels.

The use of P-Series Respirators is limited only by hygiene, damageand increased breathing resistance.

Welding Approved Respirators offer unique protective layers that aredesigned to be flame-resistant as demonstrated per ASTM D2859-96. When choosing a Welding Approved Respirator, consider thefollowing features:

• 3M™ Cool Flow™ Exhalation Valve – A patented one-way valvefor easy exhalation and cool, dry comfort.

• Conformable Noseclip – Standard (S) or M-Noseclip (M) adjustseasily for fewer pressure points.

• Faceseal – Soft and secure, conforms closely to face for long-lasting comfort and protection.

• Fully Adjustable Straps – A single tug helps provide a secure fit.

• Advanced Electret Media – Advanced electrostatically-chargedmicrofibers make breathing easier and cooler.

• Odor-Removing Filter Material – Carbon layers remove manynuisance level odors. Models labeled (OV) filter Organic Vapors,while models labeled (AG) filter Acid Gases.

• Cake-Resistant Filter Media – Specially designed filter layersprovide longer respirator life and easier breathing.

Cake-Resistant

Filter Media

AdvancedElectretMedia

Odor-RemovingMaterial

NIOSHRating

ExhaleValve Noseclip

Face-seal

Adj.StrapsCSP# 3M# Applications Quantity 1-7 8+

58338 8515Workplace applications includewelding, soldering, cutting,grinding and sanding.

N95 X M — — X — — 10/Box $32.05 30.45

80650 8512

Workplace applications includewelding, soldering and otheroperations where metal fumesare present.

N95 X M — X X — X 10/Box 69.50 66.05

70014 8212

Workplace applications includewelding, soldering and otheroperations where metal fumesare present.

N95 X S X X X — X 10/Box 73.10 69.45

80651 8514

Workplace applications includewelding, soldering and otheroperations involving metalfumes including those withozone and nuisance levels oforganic vapors.

N95 X M — X X OV X 10/Box 83.40 79.25

80647 8214

Workplace applications includewelding, soldering and otheroperations involving metalfumes including those withozone and nuisance levels oforganic vapors.

N95 X S X X X OV X 10/Box 88.05 83.65

70015 8233

Workplace applications includelead abatement, pharmaceuticalmanufacturing, welding, metalpouring and work involvingOSHA substance specific parti-cle exposures in concentrationsup to 10 x the OSHA PEL,excluding asbestos

N100 X S — X X — — Each 9.85 9.40

80649 8293Workplace applications includelead abatement, pharmaceuticalmanufacturing and welding.

P100 X S X X X — — Each 11.15 10.60

Respirators Welding Protection

201

If you have questions, we have answers. Call or visit our website.


202

Welding Protection Respirator/Gloves/Head Protection

Special Ops™ N95 RespiratorsSend in Special Ops™ for all your toughest jobs. The black Dura-Mesh® shell protects the filter media, so it stays cleaner-looking longer. HandyStrap® with buckle allows mask to hang downaround neck when not in use. The M2700 model features a Ventex®

valve to release hot air faster and provide easier breathing. TheM2800 model also features a Ventex® valve, plus an added carbonlayer to help relieve workers of nuisance levels of ozone and organic vapor odors not exceeding the OSHA PEL. This productcontains rubber latex which may cause allergic reactions in some individuals.

Medium/Large 1-9 10+59330 Special Ops M2600N95 . . . . . . . . . . . . . . . . . $22.60 21.50

A. 59331 Special Ops M2700N95 . . . . . . . . . . . . . . . . . 40.15 38.1559332 Special Ops M2800N95 . . . . . . . . . . . . . . . . . 53.55 50.90

A

Stubby Hard HatA shorter bill design makes this hard hat ideal for use with weldinghelmets. Universal slot can be used for attaching additional protection options. 4-point ratchet suspension allows for easyadjustment. Deep nape strap and absorbent cloth sweatband allowfor a comfortable fit. Meets ANSI Z89.1 Class C, G and E.

Multi-Task MIG TIG GlovesUse this multi-task glove for rugged protection during general dutyapplications and to protect hands from heat and sparks duringwelding applications. Glove is constructed of a deerskin back withgrain cowhide sewn onto the palm, cuff, knuckle and fingertips.Glove is sewn with Kevlar® thread. Price per pair.

26941 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $18.80

28585 Medium28586 Large28587 X-Large28588 XX-Large . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $16.70

Sandblast HoodThis hood protects your head and shoulders from rebounding particles and abrasives. Unit is constructed with canvas duck material fabricated over a welding helmet with ratchet headgear. The front window is made of Lexan® covered by a mesh screen.Hood must be used in conjunction with an approved respirator. This product will ship separately, direct from the manufacturer.

28882 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $171.70


Gloves Welding Protection

203

Top Grain Cowhide Mig GlovesProtect your hands from welding heat and sparks. These top graincowhide gloves are made with a wing thumb and seamless fore-finger for comfort. Gloves are Kevlar stitched for added strength. 4" gauntlet cuff offers added protection to the wrist. Price per pair.

Fleece-Lined Top Grain Cowhide Mig GlovesInsulate your hands during welding operations. Gloves are constructed of a top grain cowhide palm with cowhide split rein-forcements. A fleece lining provides added insulation in hot or coldconditions. Added features include a cowhide split back with elasticfor best fit and a seamless forefinger for comfort. Gloves are Kevlar-stitched for added strength. 4" gauntlet cuff offers added protectionto the wrist. Price per pair.

Select Shoulder Split Cowhide Welding GlovesUse these gloves from protection from heat and splatter duringwelding applications. These select shoulder split cowhide glovesare cotton lined for added heat protection. Gloves feature a rein-forced thumb and are Kevlar stitched for added strength. Extended14" length provides added protection to the wrist. Price per pair.

Side Split Cowhide Welding GlovesProtect hands from welding sparks and splatter. These side splitcowhide gloves are cotton/foam lined for added heat protection.Gloves feature a reinforced thumb and are Kevlar stitched for added strength. Extended 14" length provides added protection to the wrist. Price per pair.

24244 Medium24245 Large 1-5 6+24246 X-Large . . . . . . . . . . . . . . . . . . . . . . . . . . $17.60 16.75 24238 Medium

24239 Large 1-5 6+24240 X-Large . . . . . . . . . . . . . . . . . . . . . . . . . . $34.40 32.70

1-5 6+24254 Blue Cotton/Foam-Lined . . . . . . . . . . . . $12.55 11.9524256 Brown Cotton-Lined . . . . . . . . . . . . . . . . 14.55 13.85

1-5 6+24253 Blue . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $17.85 17.0024255 Red, White and Blue. . . . . . . . . . . . . . . . . . . 17.20 16.35


Mustang and Blue Beast Welder’s GlovesThese gloves are ideal for use during welding applications toprotect hands and arms from heat, sparks and spatter. Bothstyles feature fully welted Kevlar® sewn seams, flame-resistantsleeves and a full sock lining for longer wear with comfort. Blue Beast also has sewn-in leather reinforced thumb crotch. Price per pair.

General PurposeWelding GlovesThis red glove is made ofheat- and flame-resistantshoulder split cowhide.Standard features includea sock lining for addedcomfort and Kevlarstitching with weltedseams for added durability. Price perpair.

Cowhide 1-5 6+A. 10848 Economy Shoulder Leather. . . . . . . . . $7.25 6.90B. 10849 Select Shoulder Leather . . . . . . . . . . . 9.55 9.10C. 24257 Heavy Side Split Leather . . . . . . . . . . . 14.65 13.95D. 24258 Premium Side Split Leather. . . . . . . . . 13.75 13.10

E. Cowhide Mig/Tig10325 Medium10326 Large10327 X-Large . . . . . . . . . . . . . . . . . . . . . . . . . 13.20 12.55

1-5 6+21022 Mustang . . . . . . . . . . . . . . . . . . . . . . . $15.25 14.5021025 Blue Beast . . . . . . . . . . . . . . . . . . . . . 12.95 12.35

Premium Grain Cowhide Mig/Tig GlovesThese premium grain cowhide gloves are the economical way toprotect your hands during welding jobs. Gloves are Kevlarstitched for added strength. 4" split leather gauntlet cuff offersadded protection to the wrist. Price per pair.

24259 Medium24260 Large 1-5 6+24261 X-Large. . . . . . . . . . . . . . . . . . . . . . . . . . . . $13.10 12.45

204

Welding Protection Gloves

D

Cowhide Leather Welding GlovesProtect hands and arms from heat, sparks and spatter.Price per pair.• Economy Shoulder Leather Gloves have a gauntlet cuff.• Select Shoulder Leather Gloves have a cotton lining.• Heavy Side Split Leather Gloves feature fully welted Kevlar

sewn seams and a full sock lining for longer wear with comfort.• Premium Side Split Leather Gloves also feature fully welted

Kevlar sewn seams and a full sock lining for longer wear withcomfort. Plus they have a sewn-in leather reinforced thumbcrotch and a foam lining.

• Grain Cowhide Mig/Tig Gloves have a 4" split leather cuff.

A

B

C

E

1-5 6+24267 . . . . . . . . . . $11.85 11.30


Gloves Welding Protection

205

Goatskin Welding GlovesProtect hands and arms from heat, sparks and spatter. These goatskinmig/tig gloves are offered in a gunn cut pattern with a blue, cow splitleather gauntlet cuff, sewn with Kevlar. Price per pair.

Fleece-Lined Top GrainGoatskin Mig GlovesA top grain goatskin palm produces the best feel, while thecowhide split back resists heat. Gloves are fleece lined for addedheat protection, without the bulk. Elastic back provides a snug fit.Gloves are Kevlar stitched for added strength. 31⁄2" gauntlet cuffoffers added protection to the wrist. Price per pair.

Top Grain Pigskin Mig GlovesPigskin gloves are ideal for wet and oily conditions. The palm isunlined for dexterity, while the back is foam/cotton lined for addedheat protection. Gloves are Kevlar stitched for added strength. 4"gauntlet cuff offers added protection to the wrist. Price per pair.

Top Grain Kidskin Tig GlovesPremium top grain pearl kidskin leather enhances feel and durability. Gloves are unlined for maximum feel and dexterity.Gloves are Kevlar stitched for added strength. 4" gauntlet cuffoffers added protection to the wrist. Price per pair.

10861 Medium10862 Large 1-5 6+10863 X-Large . . . . . . . . . . . . . . . . . . . . . . . . . 13.40 12.75

24241 Medium24242 Large 1-5 6+24243 X-Large. . . . . . . . . . . . . . . . . . . . . . . . . $19.95 19.00

24230 Small24231 Medium24232 Large 1-5 6+24233 X-Large. . . . . . . . . . . . . . . . . . . . . . . . . $19.50 18.55

24247 Medium24248 Large 1-5 6+24249 X-Large. . . . . . . . . . . . . . . . . . . . . . . . . . . . $22.50 21.40


206

Welding Protection Gloves

Top Grain Elkskin Stick Welding GlovesElkskin stays soft and supple, even when hot and wet, making it thepreferred choice for pipeline welders across America. The palm isunlined for dexterity, while the back is foam lined for added heatprotection. Gloves are Kevlar stitched for added strength. 14" overalllength provides added protection to the wrist. Price per pair.

Deerskin Tig GlovesLightweight pearl deerskin split leather enhances dexterity.Gloves are unlined to maximize feel. Gloves are Kevlar stitchedfor added strength. 4" gauntlet cuff offers added protection to thewrist. Price per pair.

Yellowjacket High Heat Mig/Tig Welding GloveThis cowhide mig/tig welding glove offers a multi-layereddesign for higher heat resistance. The patented Comfoflex®

lining is flame retardant, sweat absorbent and air cushioned to provide incomparable comfort. Glove features a wide sizing pattern (8% roomier than other large gloves), continuously-welted Kevlar-sewn seams throughout and reinforcement in the palm and thumb. Price per pair.

24250 Medium24251 Large 1-5 6+24252 X-Large . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $34.25 32.55

24234 Small24235 Medium24236 Large 1-5 6+24237 X-Large . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $16.25 15.45

Comfoflex® Bucktan Welding GloveThe innovative design of this glove includes an outer shell made from the finest side split cowhide; which makes it more pliable, durable and heat resistant. The patented Comfoflex lining is flame retardant, sweat absorbent and air cushioned to provideincomparable comfort. Glove features a wide sizing pattern (8% roomier than other large gloves), continuously-welted Kevlar-sewn seams throughout and reinforcement in the palm and thumb. Price per pair.

24265 Large 1-5 6+24266 X-Large. . . . . . . . . . . . . . . . . . . . . . . . . $46.75 44.45

24262 Small24263 Large 1-5 6+24264 XX-Large . . . . . . . . . . . . . . . . . . . . . . . . . $21.45 20.40


Clothing Welding Protection

207

Leather Welder’s ClothingHeat and Flame ResistantTough leather clothing provide protection from cuts and abrasion, whilealso shielding clothing from sparks during welding or cutting. These softand pliable garments are made of side split leather.

• Cape Sleeve covers the torso and arms• Bib Apron for use with Cape Sleeve measures 19" and attaches to

the Cape Sleeve with snaps• Standard Bib Apron measure

24"W X 36"L• Split Leg Apron measures 24"W X

48"L and features one bib pocket andclips at the neck, waist and legs

• Waist Apron measures 24"W X 24"L• Chaps have a 29" inseam and an

adjustable belt top to fit waists up to 44"

• Sleeves measure 18"L and feature metal snap closures.Sold by the pair.

Choose Waist or Bib Apron

Indura® Ultra Soft®

and Nomex® Arc Flash Coveralls• Indura Ultra Soft Flame-Resistant Coveralls are

constructed of 88% cotton and 12% flame-resistant nylonfabric to produce a soft feel and an extended wear life.Coverall features a snap front closure, side pass-throughopenings, an elasticized waistband and a 32"L inseam.Two chest pockets, two hip pockets and two back pocketsprovide plenty of space for tools and equipment. Clothinghas an arc rating of 11.1 cal/cm2, which meets NFPA 70EHazard Risk Category 2. Coveralls meet ASTM 1506-01.

• Nomex IIIA Coveralls self-extinguish when taken awayfrom the source of flames. This aramid and static-dissipative fiber blend helps shield the wearer from flames,flash fires and electric arcs. This clothing is extremelydurable, lightweight and inherently flame resistant.Coveralls feature a covered snap front, an elasticizedwaistband and a 6-pocket design – two chest, two hip and two back. Choose from a variety of weights, colors,lengths and sizes. This product will ship separately,direct from the manufacturer.

11713 14282 26382 14286

Cape Sleeve30758 Medium30759 Large30760 X-Large . . . . . . . . . . . . . . . . . . . . . . . . . . $50.4530761 XX-Large . . . . . . . . . . . . . . . . . . . . . . . . . 55.5030762 3X-Large . . . . . . . . . . . . . . . . . . . . . . . . . 60.50

30763 Bib Apron for use with Cape Sleeve . . . 15.7550610 Standard Bib Apron . . . . . . . . . . . . . . . . 28.2530765 Split Leg Apron . . . . . . . . . . . . . . . . . . . 44.7550611 Waist Apron . . . . . . . . . . . . . . . . . . . . . . 31.8030764 Chaps . . . . . . . . . . . . . . . . . . . . . . . . . . . 65.9050640 Sleeves, Pair. . . . . . . . . . . . . . . . . . . . . . 22.05

9 Oz. Indura Ultra Soft Level 2 Coverall 1-2 3+11713 Medium, 40" – 42" . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $105.15 99.9011714 Large, 44" – 46" . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105.15 99.9011715 X-Large, 48" – 50" . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105.15 99.9011716 XX-Large, 52" – 54". . . . . . . . . . . . . . . . . . . . . . . . . . . . . 115.65 109.9011717 XXX-Large, 56" – 58". . . . . . . . . . . . . . . . . . . . . . . . . . . . 125.10 118.854.5 Oz. Nomex IIIA Coverall, Blue, 32" Inseam14282 Medium, 40" – 42" . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 141.10 134.0514283 Large, 44" – 46" . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 141.10 134.0514284 X-Large, 48" – 50" . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 141.10 134.0514285 XX-Large, 52" – 54". . . . . . . . . . . . . . . . . . . . . . . . . . . . . 152.05 144.454.5 Oz. Nomex IIIA Coverall, Orange, 32" Inseam26382 Medium, 40" – 42" . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 175.10 166.3526383 Large, 44" – 46" . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 175.10 166.3526384 X-Large, 48" – 50" . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 175.10 166.3526385 XX-Large, 52" – 54". . . . . . . . . . . . . . . . . . . . . . . . . . . . . 192.65 183.0526386 3X-Large, 56" – 58" . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 210.15 199.654.5 Oz. Nomex IIIA Coverall, Blue, Tall, 34" Inseam14286 Medium, 40" – 42" . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 162.25 154.1514287 Large, 44" – 46" . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 162.25 154.1514288 X-Large, 48" – 50" . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 162.25 154.1514289 XX-Large, 52" – 54". . . . . . . . . . . . . . . . . . . . . . . . . . . . . 175.00 166.256 Oz. Nomex IIIA Coverall, Blue, 32" Inseam26387 Medium, 40" – 42" . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 200.85 190.8526388 Large, 44" – 46" . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 200.85 190.8526389 X-Large, 48" – 50" . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 200.85 190.8526390 XX-Large, 52" – 54". . . . . . . . . . . . . . . . . . . . . . . . . . . . . 220.95 209.9526391 3X-Large, 56" – 58" . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 241.05 229.00


208

Welding Protection Clothing/Mats

NoTrax® Ergo Mat™ Wearwell® WeldSafe Mat

Flame-Resistant Cotton ClothingCotton Clothing is chemically-treated to be flame resistant, even after repeatedwashing. Clothing is intended for protection against sparks and open flamesduring welding, foundry and steel fabricating operations. Garments are constructed of breathable 9 ounce (Coverall) or 9.5 ounce (all other clothing)Proban®/FR-7A® 100% cotton fabric for a comfortable fit.• Coverall features a 32"L inseam and one front pocket, two hip pockets and

two back pockets.• Jacket measures 39"L and features a generous cut, snap front closure and

adjustable snaps at the wrists.• Cape Sleeve with 19" Detachable Apron features an open back to keep

workers cooler.• Apron measures 29" X 36" and includes leather ties.• Sleeves measure 18"L.

Cotton Coverall 1-2 3+14462 Medium, 40" – 42" . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $59.55 56.6014463 Large, 44" – 46" . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59.55 56.6014464 X-Large, 48" – 50" . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59.55 56.6014465 XX-Large, 52" – 54" . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64.50 61.3014466 XXX-Large, 56" – 58" . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70.40 66.90

Cotton Jacket83731 Medium, 40" – 42" . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28.05 26.6583732 Large, 44" – 46" . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28.05 26.6583733 X-Large, 48" – 50" . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28.05 26.6583734 XX-Large, 52" – 54" . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30.85 29.35

Cotton Cape Sleeve with Detachable Apron11231 Medium, 40" – 42" . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33.20 31.5511232 Large, 44" – 46" . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33.20 31.5511233 X-Large, 48" – 50" . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33.20 31.5511234 XX-Large, 52" – 54" . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35.40 33.65

Cotton Apron50612 29" X 36" . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13.65

Cotton Sleeves, Pair50648 18" . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9.10

Coating lastsfor up to 25

washes.

Welding Mats• NoTrax® Ergo Mat provides employees

with superior fatigue relief and improveddirectional traction in dry and heavy-usework areas. These wear-resistant corrugat-ed rubber-top mats are durable enough forwelding applications and offer an overallthickness is 1⁄2". 3⁄8" resilient sponge backprovides outstanding fatigue relief. Bevelededges reduce slips and trips.

• Wearwell® WeldSafe™ Mat is designedspecifically for use in welding areas and isspecially formulated to repel sparks andhot metal shards. Surface is constructed ofa new, thicker 3⁄16" rubber surface over a 1⁄2Nitricell® sponge base. The Nitricell spongebase combines PVC and Nitrile rubber toprovide exceptional resilience andrebound. Mat now features an elevatedmelting point of 285°F. Includes a threeyear warranty.

NoTrax Ergo Mat Wearwell WeldSafe Mat2' X 3' 18179 . . . . . . . . . . . . . . . . . . . . . . $54.40 18165 . . . . . . . . . . . . . . . . . $50.753' X 5' 18180 . . . . . . . . . . . . . . . . . . . . . . 130.30 18166 . . . . . . . . . . . . . . . . . 128.503' X 12' 18181 . . . . . . . . . . . . . . . . . . . . . . 290.25 —


Curtain & Accessories Welding Protection

209

Welding SignsWhen placing your order, simply add the materialabbreviation to the product code located beneatheach sign (99304 + VS = 99304VS).

VS – Vinyl VP – Plastic VA – Aluminum

10" X 14" Signs 1-9 10+Vinyl (VS). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $12.40 11.80Plastic (VP) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16.05 15.25Aluminum (VA) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27.00 25.65

Welding Safety PosterUse this 18" X 24" laminatedposters indoors or out as areminder to work safely.

99304 99305

Fire/First Aid Blanket and PouchThis flame retardant, wool blanket smothers flames fast. Blanketis stored in a red vinyl pouch for quick identification. Built-in carrying handle with grommets allows unit to be hung on a wall.Blanket measures 62" X 80" and meets Federal Flame RetardantStandard CS191-53.

1 2+70060 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $83.55 79.40

Wilson Welding Curtain SystemThis system is easily modified to fit the space needed and offers instant protection in a snap. Spectra Orange Curtain™ is a transparent weldingcurtain that provides good visibility. The heavy-duty vinyl construction filters100% of ultraviolet radiation and blue light. The curtain also minimizes arcglare, while reflecting usable light back into the work area. Every 2' X 6'strip has six snaps on either side and three grommet holes across the top.Overlaps between the curtain strips keep harmful UV rays out of the area.Stur-D-Screen is a freestanding, portable 6' X 6' safety screen with sturdyplatform legs. The frame components are comprised of 1" square steel tubing assembledwith bolted corner brackets to produce the toughest frame product available. Purchasethree curtains to cover the Stur-D-Screen.

Welding Burn KitPain-relieving Burn Jel and Sterile BurnDressings in the sizes you need are avail-able in a kit designed specifically for thewelding industry.

Kit Contains:1 12" X 16" Face Mask1 8" X 18" Burn Dressing2 4" X 4" Burn Dressings2 2" X 6" Burn Dressings1 4" X 16" Burn Dressing1 Box of Burn Jel, 25’s1 Elastic Bandage32647 . . . . . . . . . . . . . . . . . . . . $83.10

1-5 6+06280 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $42.70 40.60

1-11 12+28708 Spectra Orange Curtain, 6' X 2' . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $14.85 14.1528709 Stur-D-Screen, 6' X 6' . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 126.15

Stur-D-Screen HoldsThree Curtains


welding in this section - · pdf filewelding in this section 194 ... gas tungsten-arc welding...

Documents