welcoming address to the forum participants
TRANSCRIPT
*Participation clarifies
DRAFT AGENDA
of the Second International Forum «New manufacturing technologies» (held online) as of 30 November 2020
2 December 2020, First day of the Forum
10.00 – 10.40
Opening of the Second International Forum «New manufacturing technologies»
SPbPU TV-Studio, Technopolis Polytech
MODERATOR: Zaitsev Andrey, Head of SPbPU TV-Studio (SPbPU TV-Studio)
WELCOMING ADDRESS TO THE FORUM PARTICIPANTS
Falkov Valery, Minister of Science and Higher Education of the Russian Federation* (Videoconference)
Semin Alexey, Officer-in-Charge of the director of the Department of State Scientific and Scientific and Technical Policy of the Ministry of Science and Higher Education of the
Russian Federation (Videoconference)
Knyaginin Vladimir, Vice Governor of St. Petersburg(Videoconference)
Rudskoy Andrey, Rector of Peter the Great St. Petersburg Polytechnic University, Coordinator (initiator) of the World-class Research Center for Advanced Digital Technologies
(Videoconference)
Turichin Gleb, Rector of the St. Petersburg State Marine Technical University, member of the consortium of the World-class Research Center for Advanced Digital Technologies
(Videoconference)
Romanchuk Ivan, Officer-in-Charge of the Rector of the "Tyumen State University", member of the consortium of the World-class Research Center for Advanced Digital
Technologies (Videoconference)
Lioznov Dmitry, Acting Director, Deputy Director for Research of the A.A. Smorodintsev Research Institute of Influenza of the Ministry of Health of the Russian Federation,
member of the consortium of the World-class Research Center for Advanced Digital Technologies (Videoconference)
Borovkov Aleksey, Vice-Rector for Advanced Projects, Head of the NTI Competence Center «New Manufacturing Technologies» and the World-class Research Center for Advanced
Digital Technologies SPbPU (SPbPU TV-Studio)
*Participation clarifies
DRAFT AGENDA
of the Second International Forum «New manufacturing technologies» (held online) as of 30 November 2020
2 December 2020, First day of the Forum
11.00 -12.20
Presentation of the book «Advanced Manufacturing Technologies:
Opportunities for Russia».
SPbPU TV-Studio, Technopolis Polytech
MODERATOR: Zaitsev Andrey, Head of SPbPU TV-Studio (SPbPU
TV-Studio)
Borovkov Aleksey, Vice-Rector for Advanced Projects, Head of the
NTI Competence Center «New Manufacturing Technologies» and the
World-class Research Center for Advanced Digital Technologies
SPbPU (SPbPU TV-Studio)
Vishnevsky Konstantin, Director of the Center of Digital Economy
Research of Institute for Statistical Studies and Economics of
Knowledge, National Research University Higher School of
Economics (HSE) (Videoconference)
Kukushkin Kuzma, General Director of the «TechNet» Association
(SPbPU TV-Studio)
Lipetskaya Marina, Director of the Center for Strategic Research
North-West (Videoconference)
Roundtable: «Advanced digital
manufacturing technologies
and new generation materials»
St. Petersburg State Marine
Technical University Platform
Nikuscchenko Dmitry, Vice-
Rector for Research, St.
Petersburg State Marine
Technical University
(Videoconference)
Participants:
Dmitry Krasnov, Drive
Equipment, Russia
Roundtable: «Development
and application of digital
twins of reservoir layer of
rocks»
Tyumen State University
Platform
Golubev Evgeny, Director of
the Technological Park,
Tyumen State University
(Videoconference)
Participants:
Ermakov Alexander, head of
the business accelerator
Department of the TSU
technology Park
Ivanova Natalia, head of the
research laboratory of
Photonics and microfluidics of
TSU
Pisarev Mikhail, Director of
the TSU Polytechnic school *
Roundtable: «Creation of new
technologies and digital platforms
for the development, production
and evaluation of the effectiveness
of pharmaceutical and
immunobiological drugs for a
rapid response to emerging
infectious threats»
A.A. Smorodintsev Research Institute
of Influenza of the Ministry of Health
of the Russian Federation Platform
Danilenko Daria, Deputy Director
for Scientific Work of the A.A.
Smorodintsev Research Institute of
Influenza of the Ministry of Health of
the Russian Federation
(Videoconference)
Participants:
Vasin Andrey, acting Director Of
the Institute of biomedical systems
and biotechnologies, World-class
Research Center for Advanced
Digital Technologies SPbPU
Moshkov Dmitry, researcher at the
laboratory of systemic Virology at of
the A.A. Smorodintsev Research
Institute of Influenza
Stukova Marina, head of the
laboratory of vector vaccines at of the
A.A. Smorodintsev Research
Institute of Influenza
*Participation clarifies
DRAFT AGENDA
of the Second International Forum «New manufacturing technologies» (held online) as of 30 November 2020
2 December 2020, First day of the Forum
12.30 – 13.30 Roundtable: «Public discussion of the draft of the first edition of the national standard GOST R «Computer models and modeling. Digital twins. General Provisions»
SPbPU TV-Studio, Technopolis Polytech
MODERATOR: Khodaeva Elena, Executive Secretary of the Technical Committee for Standardization No. 700 «Mathematical Modeling and High-Performance Computing
Technologies» of Rosstandart RF (Videoconference)
Participants:
Ageev Andrey, Head of the Center for Digitalization of Enterprises of the Defense Industrial Complex FSUE «VNII" Center» (Videoconference)
Borovkov Aleksey, Vice-Rector for Advanced Projects, Head of the NTI Competence Center «New Manufacturing Technologies» and the World-class Research
Center for Advanced Digital Technologies SPbPU, chairman of the working group «Digital twins» TK700 (SPbPU TV-Studio)
Milakov Vladimir, Project Manager for New Business Development of «TVEL» JSC* (Videoconference)
Zhukov Sergey, Advisor to the General Director for Digital Transformation, FSUE «Krylov State Research Center»* (Videoconference)
Konovalchik Artem, Deputy General Designer of JSC JSC Concern VKO «Almaz-Antey»* (Videoconference)
Prokhorov Alexander, chief expert of the project office of the data center and digital products of Rosenergoatom Concern JSC (Videoconference)
Tarasova Natalia, Head of the Center for Digitalization of the Life Cycle of Products of «CNIITOCHMASH» JSC (Videoconference)
Chernov Alexander, Head of research group 0817-4 of FSUE «FNC-VNIIEF» (Videoconference)
Shagaliev Rashid, Deputy Director of FSUE «RFNC-VNIIEF», Deputy Scientific Director of FSUE RFNC-VNIIEF, First Deputy Director of ITMF FSUE RFNC-
VNIIEF * (Videoconference)
Shalaev Anton, Head of the Federal Agency for Technical Regulation and Metrology * (Videoconference)
*Participation clarifies
DRAFT AGENDA
of the Second International Forum «New manufacturing technologies» (held online) as of 30 November 2020
2 December 2020, First day of the Forum
13.40 – 15.10 Roundtable: «University Mirror Engineering Centers: Transfer of Technologies and
Competencies of the SPbPU NTI Center and Replication of Successful Experience in
the Regions»
Technopolis Polytech
MODERATOR: Rozhdestvensky Oleg, Head of the Directorate of the NTI Competence
Center «New Manufacturing Technologies» and the World-class Research Center for
Advanced Digital Technologies SPbPU
The signing of agreements between SPbPU and Immanuel Kant Baltic Federal
University, SPbPU and Surgut State University
Participants:
Borovkov Aleksey, Vice-Rector for Advanced Projects, Head of the
NTI Competence Center «New Manufacturing Technologies» and the
World-class Research Center for Advanced Digital Technologies
SPbPU, chairman of the working group «Digital twins» TK700
(Videoconference)
Golubev Evgeny, Director of the Technological Park, Tyumen State
University (Videoconference)
Koshkin Valery, Officer-in-Charge of the Rector of the Rybinsk State
Aviation Technical University (Videoconference)
Hramin Roman, General Designer of NPO "UEC-Saturn"
(Videoconference)
Podrezov Konstantin, Vice-Rector for Research Work, Tula State
Pedagogical University (Videoconference)
Popov Alexander, Director of the Marketing and Commercialization
Office of Immanuel Kant Baltic Federal University (Videoconference)
Tereshchenko Vladimir, Head of the Computer Engineering Center of
"Surgut State University" (Videoconference)
Khashirova Svetlana, Vice-Rector for Research Work of the
Kabardino-Balkarian State University (Videoconference)
Presentation of the new CML-Digest. «Technologies of electromobility: trends and
events».
SPbPU TV-Studio, Technopolis Polytech
MODERATOR: Zaitsev Andrey, Head of SPbPU TV-Studio (SPbPU TV-Studio)
Participants:
Klyavin Oleg, Deputy Head of the NTI Competence Center «New
Manufacturing Technologies chief designer SPbPU (Technopolis Polytech)
Tarshin Andrey, Deputy Head of the Directorate of the NTI Competence
Center «New Manufacturing Technologies SPbPU (Technopolis Polytech)
*Participation clarifies
DRAFT AGENDA
of the Second International Forum «New manufacturing technologies» (held online) as of 30 November 2020
2 December 2020, First day of the Forum
15.25 – 17.00 Roundtable: «Digital twins in ferrous metallurgy»
SPbPU TV-Studio, Technopolis Polytech
MODERATOR: Rozhdestvensky Oleg, Head of the Directorate of the NTI Competence Center «New Manufacturing Technologies» and the World-class Research Center for
Advanced Digital Technologies SPbPU (SPbPU TV-Studio)
Participants:
Borovkov Aleksey, Vice-Rector for Advanced Projects, Head of the NTI Competence Center «New Manufacturing Technologies» and the World-class Research
Center for Advanced Digital Technologies SPbPU (SPbPU TV-Studio)
Efimov-Soini Nikolai, начальник сектора, head of the sector, leading engineer of the NTI Competence Center «New Manufacturing Technologies SPbPU (SPbPU
TV-Studio)
Uvarkina Evgeniya, head of the Lipetsk city administration (Videoconference)
Galkin Alexander, Dean of the Faculty of Automation and Informatics of the Lipetsk State Technical University (Videoconference)
Oreshina Maria, Head of the Department of Applied Mathematics of the Lipetsk State Technical University (Videoconference)
Salikhov Sergey, First Vice-Rector of NUST MISIS (Videoconference)
Tulupov Oleg, Vice-Rector for Scientific and Innovative Work of the Magnitogorsk State Technical University (Videoconference)
*Participation clarifies
DRAFT AGENDA
of the Second International Forum «New manufacturing technologies» (held online) as of 30 November 2020
2 December 2020, First day of the Forum
17.20 – 18.20 Meeting of the working group «Technet»: «Mainstreaming of the road map «TechNet 4.0» (advanced manufacturing technologies) NTI»
Technopolis Polytech
Keynote speaker: Borovkov Alexey, Vice-Rector for Advanced Projects, Head of the NTI Competence Center «New Manufacturing Technologies» and the World-class Research
Center for Advanced Digital Technologies SPbPU, leader (co-head) of the «TechNet» working group)
Co-speaker: Kukushkin Kuzma, General Director of the «TechNet» Association
Participants (Videoconference)*:
Peskov Dmitry, Special Representative of the President of the Russian Federation for Digital and Technological Development, General Director of ANO «NTI Platform»;
Fertman Alexander, Deputy Leader (Co-Director), «TechNet» Working Group, Director for Science, Technology and Education of the Skolkovo Foundation;
Ivanov Dmitry, Deputy Leader (Co-Head) of the «TechNet» Working Group, Director for Innovative Development of the PJSC «UEC-Saturn»;
Bakhtin Alexander, head of the department of TCS NRU MIET, Center for Scientific and Technical Information "Sensorics" on the basis of MIET;
Belosludtsev Alexander, Deputy Leader (Co-Head) of the Working Group, Leading Specialist of the Strategic Development of Engineering Markets Scientific Research Center of the
NTI Competence Center «New Manufacturing Technologies» SPbPU;
Borodin Vladimir, Corresponding Member of the Russian Academy of Sciences, General Director of the Federal State Unitary Enterprise «Experimental Plant of Scientific
Instrument Making with a Special Design Bureau of the Russian Academy of Sciences»;
Builova Elena, General Director of JSC «Russian Industrial Collegium»;
Dub Alexey, member of the «TechNet» working group, head of the department of steel metallurgy, new production technologies and metal protection at NUST MISiS, first deputy
general director of JSC «Science and Innovations» (Rosatom State Corporation);
Knyaginin Vladimir, Chairman of the Board of the Foundation «Center for Strategic Research «North-West», Vice President of the Foundation «Center for Strategic Research»;
Kostukov Valentin, General Director of FSUE «RFNC – VNIIEF»;
Maloletov Аlexander, Deputy Head of the NTI Competence Center of «Technologies of Robotics and Mechatronics Components» section;
Mikrin Vadim, Deputy General Director of CJSC «INUMiT»;
Morozov Sergey, General Director of «DATADVANCE» LLC;
Nechepurenko Evgeny, Director of the Department of Innovative Digital Technologies and Venture Projects of the PJSC «United Aircraft Corporation»;
Pastuhov Vladimir, General Director of the «Russian Technological Agency» of the Ministry of Industry and Trade of Russia;
Ponomarev Aleksey, Senior Vice President for Industry Relations of the Skolkovo Institute of Science and Technology;
Prokofiev Petr, Deputy Head of the Skoltech NTI Competence Center for Wireless and Internet of Things Technologies;
Seredoho Vladimir, General Director of the «Sredne-Neva Shipbuilding Yard» JSC;
Sultanov Daniyal, Deputy Director General of the Federal State Budgetary Institution «Russian Technological Agency« of the Ministry of Industry and Trade of Russia;
Lebedeva Evgeniya, Executive Secretary of the «Technet» Working Group of the National Technology Initiative, RVC JSC.
* Participation clarifies
DRAFT AGENDA
of the Second International Forum «New manufacturing technologies» (held online) as of 24 November 2020
3 December 2020, Second day of the Forum
12.00 – 13.00 Presentation of the book: «A. Prokhorov, M. Lysachev. Digital twin. Analysis, trends, world
experience, scientific. ed. prof. A.I. Borovkov».
SPbPU TV-Studio, Technopolis Polytech
MODERATOR: Dyakova Marianna Yuryevna, Head of the Public Relations Department, Peter the
Great St. Petersburg Polytechnic University (SPbPU TV-Studio)
Participants:
Peskov Dmitry, Special Representative of the President of the Russian Federation for
Digital and Technological Development, General Director of ANO «NTI Platform»*
(Videoconference)
Borovkov Alexey, Vice-Rector for Advanced Projects, Head of the NTI Competence
Center «New Manufacturing Technologies» and the World-class Research Center for
Advanced Digital Technologies SPbPU (SPbPU TV-Studio)
Gudach Yulia, director of network development, ANO «NTI Platform»
(Videoconference)
Migalin Sergey, Director of Economics and Finance of «Rosenergoatom Concern»
JSC (Videoconference)
Prokhorov Alexander, chief expert of the project office of the data center and digital
products of «Rosenergoatom Concern» JSC (Videoconference)
12.00 – 12.40 Roundtable: «Professional standards in the field of
training in cross-cutting technologies»
Technopolis Polytech
MODERATOR: Salkutsan Sergey, Deputy Head of the
Directorate of the NTI Competence Center «New
Manufacturing Technologies, Peter the Great St.
Petersburg Polytechnic University (Technopolis Polytech)
Participants:
Arkin Pavel, professor of the base department
«Management processes of high-tech industries» based on
IAMT SPbPU, LLC «Holding Lenpoligrafmash»
(Videoconference)
*Participation clarifies
DRAFT AGENDA
of the Second International Forum «New manufacturing technologies» (held online) as of 24 November 2020
3 December 2020, Second day of the Forum
13.00 – 14.00 Roundtable: «Impact of the spread of coronavirus infection
on the development of advanced manufacturing
technologies»
Technopolis Polytech
MODERATOR: Bolsunovskaya Marina, head of the laboratory
«Industrial streaming data processing systems» of the NTI
Competence Center «New Manufacturing Technologies» SPbPU
(Videoconference)
Participants:
Amelichev Vadim, Technical Director of «С-
Innovations» LLC (Videoconference)
Bezrukov Andrey, President of the Association
for Export of Technological Sovereignty
Bolsunovskaya Marina, head of the laboratory
«Industrial streaming data processing systems»
of the NTI Competence Center «New
Manufacturing Technologies» SPbPU
(Videoconference)
Veretennikov Alexander, Deputy General
Director for Scientific and Technical Work and
Projects, FSUE EZAN (Videoconference)
Grigoriev Evgeny, Executive Director of JSC
«RUSAT» (Videoconference)
Zholobov Denis, Head of MES Business Unit,
«Adeptic Plus» LLC (Winner of the
«Development – NTI» Competition)
(Videoconference)
Sanatov Dmitry, Deputy Director of the «CSR «North-West» Foundation,
head of a division of the «CSR «North-West» Foundation
(Videoconference)
Professional standard «Specialist of the promotion and
dissemination of new manufacturing technologies of cross-
cutting digital technologies»
Technopolis Polytech
MODERATOR: Salkutsan Sergey, Deputy Head of the Directorate
of the NTI Competence Center «New Manufacturing Technologies,
Peter the Great St. Petersburg Polytechnic University
(Technopolis Polytech)
Participants:
Arkin Pavel, professor of the base department «Management
processes of high-tech industries» based on IAMT SPbPU, LLC
«Holding Lenpoligrafmash» (Videoconference)
Roundtable: «Technological
entrepreneurship»
Technopolis Polytech
MODERATOR: Aleksei Efimov, Polytech
Strascheg, Russia
Participants:
Innokenty Puntikov, Polytech
Strascheg. Moderator, Russia.
Olga Shvetsova, Korea Tech
(Korean University for Technology
and Education), South Korea.
Pavlina Vujovich, Strascheg Center
for Entrepreneurship, Germany.
Bettina Maisch, Munich University
for Applied Sciences, Germany.
Barbara Gabriel Coelho, University
of Aveiro, Portugal.
Bochtarev Oleg, Kirovsky Zavod,
Russia
Maria Bitarova, Kuban State
Technology University, Russia.
Tatiana Leontieva, State University
of Aerospace Instrumentation,
Russia.
*Participation clarifies
DRAFT AGENDA
of the Second International Forum «New manufacturing technologies» (held online) as of 24 November 2020
3 December 2020, Second day of the Forum
13.15 – 15.30 Scientific-practical conference «New manufacturing technologies» (opening): «Digital technologies in industry» and «Economics of the digital industry»
SPbPU TV-Studio, Technopolis Polytech
MODERATOR: Knyaginin Vladimir, Vice Governor of St. Petersburg* (SPbPU TV-Studio)
«Digital technologies in manufacturing»
WELCOMING ADDRESS TO THE FORUM PARTICIPANTS
Borovkov Alexey, Vice-Rector for Advanced Projects, Head of the NTI Competence Center «New Manufacturing Technologies» and the World-class Research Center for Advanced
Digital Technologies SPbPU (SPbPU TV-Studio)
Auzan Alexander, Dean of the Faculty of Economics of the Moscow State University named after M.V. Lomonosov. (Videoconference)
Participants:
Borovkov Alexey, Vice-Rector for Advanced Projects, Head of the NTI Competence Center «New Manufacturing Technologies» and the World-class Research Center for
Advanced Digital Technologies SPbPU (SPbPU TV-Studio)
Vaysberg Leonid, Chairman of the Board of Directors and Scientific Director of the NPK «Mechanobr Tekhnika» Society, Doctor of Technical Sciences, Professor,
Academician of the Russian Academy of Sciences (Videoconference)
Vorobyev Sergey, President and one of the founders of Ward Howell * (Videoconference)
Dub Alexey, first deputy of general director of JSC «Science and Innovations» (Rosatom State Corporation) (Videoconference)
Knyaginin Vladimir, Vice Governor of St. Petersburg* (Videoconference)
Petrenya Yury, Deputy General Director-Technical Director of PJSC «Power Machines»* (Videoconference)
Ressel Wolfram, Rector of the University of Stuttgart (Germany) * (Videoconference)
Tishchenko Elena, Deputy Head of the Department for Research, Advisor to the Dean of the Faculty of Economics, Moscow State University named after M.V. Lomonosov
on the digital economy (Videoconference)
Chui Stanislav, Director for Development of the Northern Sea Transit Corridor Project, «Rusatom Cargo» (Videoconference)
Shmotin Yury, Deputy General Director - General Designer of JSC «UEC» * (Videoconference)
Yakushev Vyacheslav, Corresponding Member of the Russian Academy of Sciences, FSBSI AFI (Videoconference)
14.10 – 15.30 Roundtable: «Industrial systems of intelligent video
analysis and data streaming»
Technopolis Polytech
14.10 – 16.00 Scientific and practical conference «New
manufacturing technologies» - «Digital
technologies in industry»: Projects in the field
of BIM technologies
Technopolis Polytech
Pitch session eBridge
eBridge Platform
*Participation clarifies
DRAFT AGENDA
of the Second International Forum «New manufacturing technologies» (held online) as of 24 November 2020
3 December 2020, Second day of the Forum
MODERATOR: Bolsunovskaya Marina, head of the laboratory
«Industrial streaming data processing systems» of the NTI
Competence Center «New Manufacturing Technologies»
SPbPU (Technopolis Polytech)
Participants:
Baldyrev Alexander, Deputy General Director for
Finance and Development of CJSC «Amdor»
(Videoconference)
Ivanov Philipp, Deputy Director for Research and
Development of «Olvia» LLC (Videoconference)
Ovsyannikova Anna, Leading Researcher of the
laboratory «Industrial streaming data processing
systems» of the NTI Competence Center «New
Manufacturing Technologies» SPbPU
(Videoconference)
Khutornoy Yaroslav, Programmer of the laboratory
«Industrial streaming data processing systems» of
the NTI Competence Center «New Manufacturing
Technologies» SPbPU (Videoconference)
MODERATOR: Badenko Vladimir, Leading
Researcher of the Laboratory «Modeling of
Technological Processes and Design of Power
Equipment» of the NTI Competence Center «New
Manufacturing Technologies» of SPbPU
(Technopolis Polytech)
Participants:
Badenko Vladimir, Leading
Researcher of the Laboratory
«Modeling of Technological
Processes and Design of Power
Equipment» of the NTI
Competence Center «New
Manufacturing Technologies» of
SPbPU (Technopolis Polytech)
Aleksandra Müller, M. Sc.
Research assistant, RWTH
Aachen, Germany (Factory of the
Future, digitization of
manufacturing) (Videoconference)
Alberto Celani, PhD MscEng,
Architecture Built Environment
and Construction Engineering
dept. at Politecnico di Milano,
Italy (Facility Management)
(Videoconference)
Romanovich Marina, к.т.н.,
Candidate of Technical Sciences,
Associate Professor, Higher
School of Power Engineering,
Civil Engineering Institute of
SPbPU (4D BIM, digitization of
construction) (Videoconference)
Kubanskaya Olga, Executive
Director of the National
Association of Consulting
MODERATOR: Aleksei Efimov, Polytech
Strascheg, Russia
Participants:
5-7 startups will present their projects to
experts;
EBridge experts.
Innokenty Puntikov, Polytech Strascheg.
Moderator, Russia
Olga Shvetsova, Korea Tech (Korean
University for Technology and Education),
South Korea.
Pavlina Vujovich, Strascheg Center for
Entrepreneurship, Germany.
Bettina Maisch, Munich University for
Applied Sciences, Germany
Sidorenko Vitaly, Kirovsky Zavod, Russia
Dmitry Krasnov, Drive Equipment,
Russia
*Participation clarifies
DRAFT AGENDA
of the Second International Forum «New manufacturing technologies» (held online) as of 24 November 2020
3 December 2020, Second day of the Forum
Engineers in Construction,
Deputy Chairman of the
Russian branch of
buildingSMART, Moscow,
Russia. (BIM education)
(Videoconference)
15:40 – 17:20 Round table: «Tools for supporting advanced manufacturing technologies»
Technopolis Polytech
MODERATOR: Fertman Alexander, Director for Science, Technology and Education, Skolkovo Foundation (Videoconference)
Participants:
Andronova Natalia, project manager of «RVC» JSC (Videoconference)
Volkova Angelina, head of the department for the development of professional qualifications of the FIEP (Videoconference)
Gareev Arsen, Director of the Center for Technological Development Management of NTI od the «RVC» JSC (Videoconference)
Gudkov Pavel, Deputy Director General of the Fund for Assistance to Small Innovative Enterprises (Fund for Assistance to Innovation)* (Videoconference)
Tatunashvili Levan, Deputy General Director for Innovation of the «Academpark» JSC (Videoconference)
Fertman Alexander, Director for Science, Technology and Education of the «Skolkovo» Foundation (Videoconference)
15.40 – 17.40 Scientific and practical conference «New manufacturing technologies» - «Digital technologies in industry»: Composite materials
Technopolis Polytech
MODERATOR: Tolochko Oleg, Leading Researcher of the Laboratory «Modeling of Technological Processes and Design of Power Equipment» of the
NTI Competence Center «New Manufacturing Technologies» of SPbPU (Technopolis Polytech)
Participants:
Vaganov Gleb, senior researcher research laboratory «Polymeric materials for tissue engineering and transplantology»
(Videoconference)
Leberdeev Timur, Head of the Department of Technology of Processing of Polymers and Composite Materials, Kazan State
Technological University (Videoconference)
Nemov Alexander, Leading Researcher of the Laboratory «Modeling of Technological Processes and Design of Power Equipment» of
the NTI Competence Center «New Manufacturing Technologies» of SPbPU (Technopolis Polytech)
Tolochko Oleg, Leading Researcher of the Laboratory «Modeling of Technological Processes and Design of Power Equipment» of the
NTI Competence Center «New Manufacturing Technologies» of SPbPU (Technopolis Polytech)
Roundtable: «Models of
engineering training»
Technopolis Polytech
MODERATOR: Salkutsan
Sergey, Deputy Head of the
Directorate of the NTI
Competence Center «New
Manufacturing Technologies,
Peter the Great St. Petersburg
Polytechnic University
(Technopolis Polytech) (SPbPU
TV-Studio)
Participants:
*Participation clarifies
DRAFT AGENDA
of the Second International Forum «New manufacturing technologies» (held online) as of 24 November 2020
3 December 2020, Second day of the Forum
Khashirova Svetlana, Vice-Rector for Research Work of the Kabardino-Balkarian State University (Videoconference)
Kholkhoev Bato, Candidate of Chemical Sciences, Researcher of the Baikal Institute of Nature Management SB Russian Academy of
Science (Videconference)
17.30 – 19.00 Scientific-practical conference «New manufacturing technologies» (opening): «Digital technologies in industry» and «Economics of the digital industry»
SPbPU TV-Studio, Technopolis Polytech
MODERATOR: Auzan Alexander, Dean of the Faculty of Economics of the Moscow State University named after M.V. Lomonosov (Videoconference)
«Экономика цифровой промышленности»
WELCOMING ADDRESS TO THE FORUM PARTICIPANTS
Auzan Alexander, Dean of the Faculty of Economics of the Moscow State University named after M.V. Lomonosov (Videoconference)
Borovkov Alexey, Vice-Rector for Advanced Projects, Head of the NTI Competence Center «New Manufacturing Technologies» and the World-class Research Center for Advanced
Digital Technologies SPbPU (SPbPU TV-Studio)
Участники:
Auzan Alexander, Dean of the Faculty of Economics of the Moscow State University named after M.V. Lomonosov (Videoconference)
Badenko Vladimir, Leading Researcher of the Laboratory «Modeling of Technological Processes and Design of Power Equipment» of the NTI Competence Center «New
Manufacturing Technologies» of SPbPU (Technopolis Polytech)
Gimranov Roman, Head of Information Technologies Department of PJSC «Surgutneftegas» (Videoconference)
Claudia Loebbecke, Department of Media and Technology Management University of Cologne, Germany* (Videoconference)
Lugachev Mikhail, Head of the Department of Economic Informatics, Moscow State University named after M.V. Lomonosov (Videoconference)
Shastitko Andrey, Head of the Department of Competitive and Industrial Policy of the Faculty of Economics of the Moscow State University named after M.V. Lomonosov,
Director of the Center for Competition and Economic Regulation Research of the Russian Presidential Academy of National Economy and Public Administration under the
President of the Russian Federation (Videoconference)