week 10 part 3 pe 6282 mecchanical liquid and electrical
DESCRIPTION
mechanical , Liquid and Electrical ModelingTRANSCRIPT
![Page 1: Week 10 part 3 pe 6282 mecchanical liquid and electrical](https://reader035.vdocuments.us/reader035/viewer/2022062406/55897701d8b42aa96d8b4770/html5/thumbnails/1.jpg)
Week 5 – Topic:
Mechanical Modeling of
Systems
Control System EngineeringPE-3032Prof. CHARLTON S. INAODefense Engineering College, Debre Zeit , Ethiopia
1
![Page 2: Week 10 part 3 pe 6282 mecchanical liquid and electrical](https://reader035.vdocuments.us/reader035/viewer/2022062406/55897701d8b42aa96d8b4770/html5/thumbnails/2.jpg)
Instructional Objectives
In this lesson students will:1) Review the mechanical, electrical, hydraulic ,pneumatic, and
fluid fundamentals2) Learn how to find and construct mathematical model for
linear time invariant mechanical, electrical, pneumatic , hydraulic, and fluid systems.
3) Review of Laplace transform as applied to transfer function4) Solve practical samples and application
![Page 3: Week 10 part 3 pe 6282 mecchanical liquid and electrical](https://reader035.vdocuments.us/reader035/viewer/2022062406/55897701d8b42aa96d8b4770/html5/thumbnails/3.jpg)
System Modeling Definition
Systems modeling or system modeling is the interdisciplinary study of the use of models to conceptualize and construct systems in engineering.(mechanical, hydraulic, fluid,liquid level, electrical , electromechanical and thermal).
• System analysis, acquiring information on various aspects of system performance. system analysis was carried out using the physical system subjected to test input signals, observing its corresponding response.
• System model, a simplified representation of the physical system under analysis .
![Page 4: Week 10 part 3 pe 6282 mecchanical liquid and electrical](https://reader035.vdocuments.us/reader035/viewer/2022062406/55897701d8b42aa96d8b4770/html5/thumbnails/4.jpg)
Dynamic systemsTo be able to describe how the output of a system
depends on its input and how the output changes with time when the input changes, we need a mathematical equation relating the input and output. The following describes how we can arrive at the input-output relationships for systems by considering them to be composed of just a few simple basic elements.
Thus, if we want to develop a model for a car suspension we need to consider how easy it is to extend or compress it, i.e. its stiffness, the forces damping out any motion of the suspension and the mass of the system and so its resistance of the system to acceleration, i.e. its inertia.
![Page 5: Week 10 part 3 pe 6282 mecchanical liquid and electrical](https://reader035.vdocuments.us/reader035/viewer/2022062406/55897701d8b42aa96d8b4770/html5/thumbnails/5.jpg)
So we think of the model as having the separate elements of stiffness, damping and inertia which we can represent by a spring, a dashpot and a mass (Figure ) and then write down equations for the behaviour of each element using the fundamental physical laws governing the behaviour of each element. This way of modelling a system is known as lumped-parameter modelling.
Car Suspension System
![Page 6: Week 10 part 3 pe 6282 mecchanical liquid and electrical](https://reader035.vdocuments.us/reader035/viewer/2022062406/55897701d8b42aa96d8b4770/html5/thumbnails/6.jpg)
Mechanical systemsMechanical systems, however complex, have stiffness
(or springiness),damping and inertia and can be considered to be composed of basic elements which can be represented by springs, dashpots and masses.
![Page 7: Week 10 part 3 pe 6282 mecchanical liquid and electrical](https://reader035.vdocuments.us/reader035/viewer/2022062406/55897701d8b42aa96d8b4770/html5/thumbnails/7.jpg)
1 Spring
The 'springiness' or 'stiffness' of a system can be represented by an ideal spring (ideal because it has only springiness and no other properties). For a linear spring (Figure a), the extension y is proportional to the applied extending force F and we have:
F=ky
where k is a constant termed the stiffness.
![Page 8: Week 10 part 3 pe 6282 mecchanical liquid and electrical](https://reader035.vdocuments.us/reader035/viewer/2022062406/55897701d8b42aa96d8b4770/html5/thumbnails/8.jpg)
![Page 9: Week 10 part 3 pe 6282 mecchanical liquid and electrical](https://reader035.vdocuments.us/reader035/viewer/2022062406/55897701d8b42aa96d8b4770/html5/thumbnails/9.jpg)
2 DashpotThe 'damping' of a mechanical system can be represented by a dashpot. This is a piston moving in a viscous medium, e.g. oil, in a cylinder (Figure b). Movement of the piston inwards requires the trapped fluid to flow out past edges of the piston; movement outwards requires fluid to flow past the piston and into the enclosed space. For such a system, the resistive force F which has to be overcome is proportional to the velocity of the piston and hence the rate of change of displacement y with time, i.e. dy/dt. Thus we can write:
where c is a constant. ; i. e., c is the viscous damping coefficient, given in units of newton seconds per meter (N s/m)
Dashpot --this device uses the viscous drag of a fluid, such as oil, to provide a resistance that is related linearly to velocity.
![Page 10: Week 10 part 3 pe 6282 mecchanical liquid and electrical](https://reader035.vdocuments.us/reader035/viewer/2022062406/55897701d8b42aa96d8b4770/html5/thumbnails/10.jpg)
![Page 11: Week 10 part 3 pe 6282 mecchanical liquid and electrical](https://reader035.vdocuments.us/reader035/viewer/2022062406/55897701d8b42aa96d8b4770/html5/thumbnails/11.jpg)
![Page 12: Week 10 part 3 pe 6282 mecchanical liquid and electrical](https://reader035.vdocuments.us/reader035/viewer/2022062406/55897701d8b42aa96d8b4770/html5/thumbnails/12.jpg)
3 Mass
The 'inertia' of a system, i.e. how much it resists being accelerated can be represented by mass. For a mass m (Figure c), the relationship between the applied force F and its acceleration a is given by Newton's second law as F = ma. But acceleration is the rate of change of velocity v with time /, i.e. a = dy/dt, and velocity is the rate of change of displacement y with time, i.e. v = dy/dt. Thus a = d(dy/dt)/dt and so we can write
![Page 13: Week 10 part 3 pe 6282 mecchanical liquid and electrical](https://reader035.vdocuments.us/reader035/viewer/2022062406/55897701d8b42aa96d8b4770/html5/thumbnails/13.jpg)
![Page 14: Week 10 part 3 pe 6282 mecchanical liquid and electrical](https://reader035.vdocuments.us/reader035/viewer/2022062406/55897701d8b42aa96d8b4770/html5/thumbnails/14.jpg)
![Page 15: Week 10 part 3 pe 6282 mecchanical liquid and electrical](https://reader035.vdocuments.us/reader035/viewer/2022062406/55897701d8b42aa96d8b4770/html5/thumbnails/15.jpg)
Example
Derive a model for the mechanical system represented by the system of mass, spring and dashpot given in Figure a. The input to the system is the force F and the output is the displacement y.
![Page 16: Week 10 part 3 pe 6282 mecchanical liquid and electrical](https://reader035.vdocuments.us/reader035/viewer/2022062406/55897701d8b42aa96d8b4770/html5/thumbnails/16.jpg)
To obtain the system model we draw free-body diagrams, these being diagrams of masses showing just the external forces acting on each mass. For the system in Figure a ,we have just one mass and so just one free-body diagram and that is shown in Figure b. As the free-body diagram indicates, the net force acting on the mass is the applied force minus the forces exerted by the spring and by the dashpot:
![Page 17: Week 10 part 3 pe 6282 mecchanical liquid and electrical](https://reader035.vdocuments.us/reader035/viewer/2022062406/55897701d8b42aa96d8b4770/html5/thumbnails/17.jpg)
Then applying Newton's second law, this force must be equal to ma, where a is the acceleration, and so:
The term second-order is used because the equation includes as its highest derivative d2y/dt2.
The Net force is the force applied to the mass to cause it
to accelerate.
![Page 18: Week 10 part 3 pe 6282 mecchanical liquid and electrical](https://reader035.vdocuments.us/reader035/viewer/2022062406/55897701d8b42aa96d8b4770/html5/thumbnails/18.jpg)
Application Example: MechanicalSpring-dashpot-mass model
Problem 1. Derive the differential equation describing the relationship between the input force F and the output of the displacement x for the system shown below.
Solution:Netforce=F- k1x-k2x; but Netforce= md2x/dt2;
md2x/dt2;therefore =F- k1x-k2x md2x/dt2; + x(k1-k2) = FAns..
![Page 19: Week 10 part 3 pe 6282 mecchanical liquid and electrical](https://reader035.vdocuments.us/reader035/viewer/2022062406/55897701d8b42aa96d8b4770/html5/thumbnails/19.jpg)
Problem No.2. Derive the differential equation describing the motion of the mass m1 in the figure when a force F is applied.
Solution: Using Hooke’s LawConsider first just m1 and the force acting on it. ; thus the force on the lower spring is k(x2-x1); then the force exerted by the upper spring is k2(x3-x2).
Net force=k1(x2-x1) – k2(x3-x2)
The net force will cause the mass to have an acceleration
md2x/dt2; =k1(x2-x1) – k2(x3-x2)
But F=k1(x2-x1), the force causing the extension of the lower spring.
Hence, the final equation is
md2x/dt2 + K2(x3-x2)=F;
F
![Page 20: Week 10 part 3 pe 6282 mecchanical liquid and electrical](https://reader035.vdocuments.us/reader035/viewer/2022062406/55897701d8b42aa96d8b4770/html5/thumbnails/20.jpg)
Problem No. 3Derive a differential equation relating the input and output for each of the systems shown in figure a.
Answer.
Figure a
![Page 21: Week 10 part 3 pe 6282 mecchanical liquid and electrical](https://reader035.vdocuments.us/reader035/viewer/2022062406/55897701d8b42aa96d8b4770/html5/thumbnails/21.jpg)
Rotational systems
• In control systems we are often concerned with rotational systems, e.g. we might want a model for the behavior of a motor drive shaft (Figure) and how the driven load rotation will be related to the rotational twisting input to the drive shaft.
![Page 22: Week 10 part 3 pe 6282 mecchanical liquid and electrical](https://reader035.vdocuments.us/reader035/viewer/2022062406/55897701d8b42aa96d8b4770/html5/thumbnails/22.jpg)
• For rotational systems the basic building blocks are a torsion spring, a rotary damper and the moment of inertia (Figure a, b, c).
![Page 23: Week 10 part 3 pe 6282 mecchanical liquid and electrical](https://reader035.vdocuments.us/reader035/viewer/2022062406/55897701d8b42aa96d8b4770/html5/thumbnails/23.jpg)
1 Torsional spring
The 'springiness' or 'stiffness' of a rotational spring is represented by a torsional spring. For a torsional spring, the angle θ rotated is proportional to the torque T:
where k is a measure of the stiffness of the spring.
![Page 24: Week 10 part 3 pe 6282 mecchanical liquid and electrical](https://reader035.vdocuments.us/reader035/viewer/2022062406/55897701d8b42aa96d8b4770/html5/thumbnails/24.jpg)
2 Rotational dashpot
The damping inherent in rotational motion is represented by a rotational dashpot. For a rotational dashpot, i.e. effectively a disk rotating in a fluid, the resistive torque T is proportional to the angular velocity θ and thus:
where c is the damping constant.
![Page 25: Week 10 part 3 pe 6282 mecchanical liquid and electrical](https://reader035.vdocuments.us/reader035/viewer/2022062406/55897701d8b42aa96d8b4770/html5/thumbnails/25.jpg)
3 .InertiaThe inertia of a rotational system is represented by the moment of inertia of a mass. A torque T applied to a mass with a moment of inertia I results in an angular acceleration a and thus, since angular acceleration is the rate of change of angular velocity ω with time, i.e. dω/dt, and angular velocity ω is the rate of change of angle θ with time, i.e. dθ/dt, then the angular acceleration is d(dθ /dt)/dt and so:
![Page 26: Week 10 part 3 pe 6282 mecchanical liquid and electrical](https://reader035.vdocuments.us/reader035/viewer/2022062406/55897701d8b42aa96d8b4770/html5/thumbnails/26.jpg)
![Page 27: Week 10 part 3 pe 6282 mecchanical liquid and electrical](https://reader035.vdocuments.us/reader035/viewer/2022062406/55897701d8b42aa96d8b4770/html5/thumbnails/27.jpg)
![Page 28: Week 10 part 3 pe 6282 mecchanical liquid and electrical](https://reader035.vdocuments.us/reader035/viewer/2022062406/55897701d8b42aa96d8b4770/html5/thumbnails/28.jpg)
Example
Develop a model for the system shown in Figure a of the rotation of a disk as a result of twisting a shaft. Figure (b) shows the free-body diagram for the system.
![Page 29: Week 10 part 3 pe 6282 mecchanical liquid and electrical](https://reader035.vdocuments.us/reader035/viewer/2022062406/55897701d8b42aa96d8b4770/html5/thumbnails/29.jpg)
The torques acting on the disk are the applied torque T, the spring torque kθ and the damping torque cw. Hence:
We thus have the second-order differential equation relating the input of the torque to the output of the angle of twist:
![Page 30: Week 10 part 3 pe 6282 mecchanical liquid and electrical](https://reader035.vdocuments.us/reader035/viewer/2022062406/55897701d8b42aa96d8b4770/html5/thumbnails/30.jpg)
Application Example:Rotational system
a) Rotating mass on the end of the shaft
b) The building block model
A motor is used to rotate a load. Devise a model and obtain a differential equation for it.
Answer:
Id2θ/dt2 + c dθ/dt + kθ=T
![Page 31: Week 10 part 3 pe 6282 mecchanical liquid and electrical](https://reader035.vdocuments.us/reader035/viewer/2022062406/55897701d8b42aa96d8b4770/html5/thumbnails/31.jpg)
Problem 2
Figure
Answer.
Derive a differential equation relating the input and output for each of the systems shown in the figure .
From T- cdθ/dt - k θ
![Page 32: Week 10 part 3 pe 6282 mecchanical liquid and electrical](https://reader035.vdocuments.us/reader035/viewer/2022062406/55897701d8b42aa96d8b4770/html5/thumbnails/32.jpg)
![Page 33: Week 10 part 3 pe 6282 mecchanical liquid and electrical](https://reader035.vdocuments.us/reader035/viewer/2022062406/55897701d8b42aa96d8b4770/html5/thumbnails/33.jpg)
Analogous Quantities (Force-Voltage Analogy)
Mechanical SystemElectrical System
Translatory RotationalForce (f) Torque (T) Voltage (e)Mass (M) Moment of Inertia (J) Inductance (L)Viscous friction Coefficient (C)
Viscous friction Coefficient (C)
Resistance (R)
Spring Stiffness (K) Torsional Spring Stiffness (K)
Reciprocal of Capacitance (1/C)
Displacement (x) Angular Displacement (θ)
Charge (q)
Velocity(x) Angular Velocity(¨θ) Current (i)
![Page 34: Week 10 part 3 pe 6282 mecchanical liquid and electrical](https://reader035.vdocuments.us/reader035/viewer/2022062406/55897701d8b42aa96d8b4770/html5/thumbnails/34.jpg)
Analogous Quantities (Force-Current Analogy)
Mechanical SystemElectrical System
Translatory RotationalForce (f) Torque (T) Current (i)Displacement (x) Angular
Displacement ( (θ)Flux linkages (F)
Velocity(x) Angular Velocity (θ) Voltage (e)
Mass (M) Moment of Inertia (J) Capacitance (C)
Viscous friction Coefficient (B)
Viscous friction Coefficient (f)
Reciprocal of Resistance (1/R)
Spring (K) Torsional Spring Constant (K)
Reciprocal of Inductance (1/L)
![Page 35: Week 10 part 3 pe 6282 mecchanical liquid and electrical](https://reader035.vdocuments.us/reader035/viewer/2022062406/55897701d8b42aa96d8b4770/html5/thumbnails/35.jpg)
Electrical systems
The basic elements of electrical systems are the pure components of resistor, inductor and capacitor (Figure), the term pure is used to indicate that the resistor only possesses the property of resistance, the inductor only inductance and the capacitor only capacitance.
![Page 36: Week 10 part 3 pe 6282 mecchanical liquid and electrical](https://reader035.vdocuments.us/reader035/viewer/2022062406/55897701d8b42aa96d8b4770/html5/thumbnails/36.jpg)
1 Resistor For a resistor, resistance R, the potential
difference v across it when there is a current i through it is given by:
![Page 37: Week 10 part 3 pe 6282 mecchanical liquid and electrical](https://reader035.vdocuments.us/reader035/viewer/2022062406/55897701d8b42aa96d8b4770/html5/thumbnails/37.jpg)
2 Inductor• For an inductor, inductance L, the potential
difference v across it at any instant depends on the rate of change of current i and is:
![Page 38: Week 10 part 3 pe 6282 mecchanical liquid and electrical](https://reader035.vdocuments.us/reader035/viewer/2022062406/55897701d8b42aa96d8b4770/html5/thumbnails/38.jpg)
![Page 39: Week 10 part 3 pe 6282 mecchanical liquid and electrical](https://reader035.vdocuments.us/reader035/viewer/2022062406/55897701d8b42aa96d8b4770/html5/thumbnails/39.jpg)
![Page 40: Week 10 part 3 pe 6282 mecchanical liquid and electrical](https://reader035.vdocuments.us/reader035/viewer/2022062406/55897701d8b42aa96d8b4770/html5/thumbnails/40.jpg)
![Page 41: Week 10 part 3 pe 6282 mecchanical liquid and electrical](https://reader035.vdocuments.us/reader035/viewer/2022062406/55897701d8b42aa96d8b4770/html5/thumbnails/41.jpg)
![Page 42: Week 10 part 3 pe 6282 mecchanical liquid and electrical](https://reader035.vdocuments.us/reader035/viewer/2022062406/55897701d8b42aa96d8b4770/html5/thumbnails/42.jpg)
![Page 43: Week 10 part 3 pe 6282 mecchanical liquid and electrical](https://reader035.vdocuments.us/reader035/viewer/2022062406/55897701d8b42aa96d8b4770/html5/thumbnails/43.jpg)
![Page 44: Week 10 part 3 pe 6282 mecchanical liquid and electrical](https://reader035.vdocuments.us/reader035/viewer/2022062406/55897701d8b42aa96d8b4770/html5/thumbnails/44.jpg)
![Page 45: Week 10 part 3 pe 6282 mecchanical liquid and electrical](https://reader035.vdocuments.us/reader035/viewer/2022062406/55897701d8b42aa96d8b4770/html5/thumbnails/45.jpg)
dt
diLRivv a
aba
![Page 46: Week 10 part 3 pe 6282 mecchanical liquid and electrical](https://reader035.vdocuments.us/reader035/viewer/2022062406/55897701d8b42aa96d8b4770/html5/thumbnails/46.jpg)
Electrical Application problems
Problem 1.Derive the transfer function shown below:
![Page 47: Week 10 part 3 pe 6282 mecchanical liquid and electrical](https://reader035.vdocuments.us/reader035/viewer/2022062406/55897701d8b42aa96d8b4770/html5/thumbnails/47.jpg)
RCTwheresT
sRCsVi
sVoFunctionTransfer
sRCsVosVithen
sVoRsVior
ssCVosIorsIsC
sVo
sVosRIsVi
getwetransformLaplacetheTaking
1
1
)1(
1
)(
)(
)1)(()(
)()(
)()()(1
)(
)()()(
,
CVo(s)s
![Page 48: Week 10 part 3 pe 6282 mecchanical liquid and electrical](https://reader035.vdocuments.us/reader035/viewer/2022062406/55897701d8b42aa96d8b4770/html5/thumbnails/48.jpg)
Example 1
![Page 49: Week 10 part 3 pe 6282 mecchanical liquid and electrical](https://reader035.vdocuments.us/reader035/viewer/2022062406/55897701d8b42aa96d8b4770/html5/thumbnails/49.jpg)
![Page 50: Week 10 part 3 pe 6282 mecchanical liquid and electrical](https://reader035.vdocuments.us/reader035/viewer/2022062406/55897701d8b42aa96d8b4770/html5/thumbnails/50.jpg)
Hydraulic & Pneumatic Fundamentals
Pneumatic Hydraulic
Compressed Air Industrial Oil
Light loads,6-8 bars Heavy loads, unlimited, no OL
Fast, erratic Slow, stable
Compressor Pump
Compressible Incompressible
Air Receiver/Air Reservoir Tank
Exhaust to Atmosphere Liquid back to Tank
PU tubes Hi pressure Wire braided hose
![Page 51: Week 10 part 3 pe 6282 mecchanical liquid and electrical](https://reader035.vdocuments.us/reader035/viewer/2022062406/55897701d8b42aa96d8b4770/html5/thumbnails/51.jpg)
Hydraulic System
![Page 52: Week 10 part 3 pe 6282 mecchanical liquid and electrical](https://reader035.vdocuments.us/reader035/viewer/2022062406/55897701d8b42aa96d8b4770/html5/thumbnails/52.jpg)
Pneumatic System
![Page 53: Week 10 part 3 pe 6282 mecchanical liquid and electrical](https://reader035.vdocuments.us/reader035/viewer/2022062406/55897701d8b42aa96d8b4770/html5/thumbnails/53.jpg)
Component parts of Pneumatic System
![Page 54: Week 10 part 3 pe 6282 mecchanical liquid and electrical](https://reader035.vdocuments.us/reader035/viewer/2022062406/55897701d8b42aa96d8b4770/html5/thumbnails/54.jpg)
Pneumatic Service Units
![Page 55: Week 10 part 3 pe 6282 mecchanical liquid and electrical](https://reader035.vdocuments.us/reader035/viewer/2022062406/55897701d8b42aa96d8b4770/html5/thumbnails/55.jpg)
![Page 56: Week 10 part 3 pe 6282 mecchanical liquid and electrical](https://reader035.vdocuments.us/reader035/viewer/2022062406/55897701d8b42aa96d8b4770/html5/thumbnails/56.jpg)
Comparison Between Pneumatic Systems and Hydraulic Systems
The fluid generally found in pneumatic systems is air; in hydraulic systems it is oil. And it is primarilythe different properties of the fluids involved that characterize the differences between the two systems.
![Page 57: Week 10 part 3 pe 6282 mecchanical liquid and electrical](https://reader035.vdocuments.us/reader035/viewer/2022062406/55897701d8b42aa96d8b4770/html5/thumbnails/57.jpg)
These differences can be listed as follows:
1. Air and gases are compressible, whereas oil is incompressible (except at high pressure).
2. Air lacks lubricating property and always contains water vapor. Oil functions as a hydraulic fluid as well as a lubricator.
3. The normal operating pressure of pneumatic systems is very much lower than that of hydraulic systems.
![Page 58: Week 10 part 3 pe 6282 mecchanical liquid and electrical](https://reader035.vdocuments.us/reader035/viewer/2022062406/55897701d8b42aa96d8b4770/html5/thumbnails/58.jpg)
4. Output powers of pneumatic systems are considerably less than those of hydraulic systems.
5. Accuracy of pneumatic actuators is poor at low velocities, whereas accuracy of hydraulic actuators may be made satisfactory at all velocities.
6. In pneumatic systems, external leakage is permissible to a certain extent, but internal leakage must be avoided because the effective pressure difference is rather small. In hydraulic systems internal leakage is permissible to a certain extent, but external leakage must be avoided.
![Page 59: Week 10 part 3 pe 6282 mecchanical liquid and electrical](https://reader035.vdocuments.us/reader035/viewer/2022062406/55897701d8b42aa96d8b4770/html5/thumbnails/59.jpg)
7. No return pipes are required in pneumatic systems when air is used, whereas they are always needed in hydraulic systems.
8. Normal operating temperature for pneumatic systems is 5° to 60°C (41° to 140°F). The pneumatic system, however, can be operated in the 0° to 200°C (32° to 392°F) range. Pneumatic systems are insensitive to temperature changes, in contrast to hydraulic systems, in which fluid friction due to viscosity depends greatly on temperature. Normal operating temperature for hydraulic systems is 20° to 70°C (68° to 158°F).
9. Pneumatic systems are fire- and explosion-proof, whereas hydraulic systems are not, unless nonflammable liquid is used.
![Page 60: Week 10 part 3 pe 6282 mecchanical liquid and electrical](https://reader035.vdocuments.us/reader035/viewer/2022062406/55897701d8b42aa96d8b4770/html5/thumbnails/60.jpg)
Advantages and Disadvantages of Hydraulic Systems.
• There are certain advantages and disadvantages in using hydraulic systems rather than other systems.
![Page 61: Week 10 part 3 pe 6282 mecchanical liquid and electrical](https://reader035.vdocuments.us/reader035/viewer/2022062406/55897701d8b42aa96d8b4770/html5/thumbnails/61.jpg)
Some of the advantages are the following:
1. Hydraulic fluid acts as a lubricant, in addition to carrying away heat generated in the system to a convenient heat exchanger.
2. Comparatively small-sized hydraulic actuators can develop large forces or torques.(Pascal’s Law)
3. Hydraulic actuators have a higher speed of response with fast starts, stops, and speed reversals.
![Page 62: Week 10 part 3 pe 6282 mecchanical liquid and electrical](https://reader035.vdocuments.us/reader035/viewer/2022062406/55897701d8b42aa96d8b4770/html5/thumbnails/62.jpg)
4. Hydraulic actuators can be operated under continuous, intermittent, reversing, and stalled conditions without damage.
5. Availability of both linear and rotary actuators gives flexibility in design.
6. Because of low leakages in hydraulic actuators, speed drop when loads are applied is small.
![Page 63: Week 10 part 3 pe 6282 mecchanical liquid and electrical](https://reader035.vdocuments.us/reader035/viewer/2022062406/55897701d8b42aa96d8b4770/html5/thumbnails/63.jpg)
On the other hand, several disadvantages tend to limit their use.
1. Hydraulic power is not readily available compared to electric power.
2. Cost of a hydraulic system may be higher than that of a comparable electrical system performing a similar function.
3. Fire and explosion hazards exist unless fire-resistant fluids are used.
![Page 64: Week 10 part 3 pe 6282 mecchanical liquid and electrical](https://reader035.vdocuments.us/reader035/viewer/2022062406/55897701d8b42aa96d8b4770/html5/thumbnails/64.jpg)
4. Because it is difficult to maintain a hydraulic system that is free from leaks, the system tends to be messy.
5. Contaminated oil may cause failure in the proper functioning of a hydraulic system.
6. As a result of the nonlinear and other complex characteristics involved, the design of sophisticated hydraulic systems is quite involved.
7. Hydraulic circuits have generally poor damping characteristics. If a hydraulic circuit is not designed properly, some unstable phenomena may occur or disappear, depending on the operating condition.
![Page 65: Week 10 part 3 pe 6282 mecchanical liquid and electrical](https://reader035.vdocuments.us/reader035/viewer/2022062406/55897701d8b42aa96d8b4770/html5/thumbnails/65.jpg)
Fluid and Liquid SystemsA common fluid control system involves liquid flowing into a container and out
of it through a valve, the requirement being to control the level of the liquid in the container. For such a system we need a model which indicates how the height of liquid in the container is related to the rates of inflow and outflow.
For a fluid system the three building blocks are resistance, capacitance and inertance; these are the equivalents of electrical resistance, capacitance and inductance. The equivalent of electrical current is the volumetric rate of flow and of potential difference is pressure difference.
Hydraulic ResistanceHydraulic CapacitanceHydraulic Inertance
ALρ
I
ρgA
C
qpp
R 21
![Page 66: Week 10 part 3 pe 6282 mecchanical liquid and electrical](https://reader035.vdocuments.us/reader035/viewer/2022062406/55897701d8b42aa96d8b4770/html5/thumbnails/66.jpg)
Figure shows the basic form of building blocks for hydraulic systems.
![Page 67: Week 10 part 3 pe 6282 mecchanical liquid and electrical](https://reader035.vdocuments.us/reader035/viewer/2022062406/55897701d8b42aa96d8b4770/html5/thumbnails/67.jpg)
1 Hydraulic resistance• Hydraulic resistance R is the resistance to
flow which occurs when a liquid flows from one diameter pipe to another (Figure a) and is defined as being given by the hydraulic equivalent of Ohm's law:
R=p1-p2/q
![Page 68: Week 10 part 3 pe 6282 mecchanical liquid and electrical](https://reader035.vdocuments.us/reader035/viewer/2022062406/55897701d8b42aa96d8b4770/html5/thumbnails/68.jpg)
2 Hydraulic capacitance• Hydraulic capacitance C is the term used to
describe energy storage where the hydraulic liquid is stored in the form of potential energy (Figure b). The rate of change of volume V of liquid stored is equal to the difference between the volumetric rate at which liquid enters the container q1 and the rate at which it leaves q2, i.e.
![Page 69: Week 10 part 3 pe 6282 mecchanical liquid and electrical](https://reader035.vdocuments.us/reader035/viewer/2022062406/55897701d8b42aa96d8b4770/html5/thumbnails/69.jpg)
;h=p/ρg
![Page 70: Week 10 part 3 pe 6282 mecchanical liquid and electrical](https://reader035.vdocuments.us/reader035/viewer/2022062406/55897701d8b42aa96d8b4770/html5/thumbnails/70.jpg)
![Page 71: Week 10 part 3 pe 6282 mecchanical liquid and electrical](https://reader035.vdocuments.us/reader035/viewer/2022062406/55897701d8b42aa96d8b4770/html5/thumbnails/71.jpg)
3 Hydraulic inertance• Hydraulic inertance is the equivalent of
inductance in electrical systems. To accelerate a fluid a net force is required and this is provided by the pressure difference (Figure c). Thus:
![Page 72: Week 10 part 3 pe 6282 mecchanical liquid and electrical](https://reader035.vdocuments.us/reader035/viewer/2022062406/55897701d8b42aa96d8b4770/html5/thumbnails/72.jpg)
![Page 73: Week 10 part 3 pe 6282 mecchanical liquid and electrical](https://reader035.vdocuments.us/reader035/viewer/2022062406/55897701d8b42aa96d8b4770/html5/thumbnails/73.jpg)
Example• Develop a model for the hydraulic system
shown in Figure where there is a liquid entering a container at one rate q1 and leaving through a valve at another rate q2.
![Page 74: Week 10 part 3 pe 6282 mecchanical liquid and electrical](https://reader035.vdocuments.us/reader035/viewer/2022062406/55897701d8b42aa96d8b4770/html5/thumbnails/74.jpg)
![Page 75: Week 10 part 3 pe 6282 mecchanical liquid and electrical](https://reader035.vdocuments.us/reader035/viewer/2022062406/55897701d8b42aa96d8b4770/html5/thumbnails/75.jpg)
Review Questions:
![Page 76: Week 10 part 3 pe 6282 mecchanical liquid and electrical](https://reader035.vdocuments.us/reader035/viewer/2022062406/55897701d8b42aa96d8b4770/html5/thumbnails/76.jpg)