Weather Monitoring Solutions

BWS-200 Basic Weather Station

Features:

• Campbell Scientific data logger• Solar powered• Standard suite of sensors – air

temperature, relative humidity, wind speed & wind direction .

• Wireless variation available• Evapotranspiration (ETo)

measurement possible with optional CS3000 pyranometer

• Choice of mounting options available.

Bespoke Automatic Weather Stations

• Choose from wide range of sensors from various manufacturers

• Choice of communications – radio, modem, GSM, GPRS, satellite, ethernet etc.

• Tripod or tower based.• Campbell Scientific data logger which

monitors and controls and performs on-board calculations.

• Easily expandable• Stand alone unit or can be networked.• Choice of power options including solar

panels and battery for long term, unattended operation.

Meteorological Sensors

Wide choice from worlds leading manufacturers:

• Atmospheric pressure• Rainfall• Solar radiation• Snow depth• Temperature & relative

humidity• Wind speed & direction

Micrometeorology

Atmospheric Flux Measurement• An integrated system for CO2, water vapour & heat

fluxes• Sensors, data loggers and software integrated into

a research grade system• Compute fluxes online or archive measurements for

later analysis• Field PC not required• Synchronised wind, CO and H O measurements• Self-diagnostics assure measurement integrity• Aerodynamic anemometer and analyser minimise

flow distortion• Continuous operation from solar panels and

batteries• Robust design; -30° to +50°C operating range

Present Weather Sensor

PWS100 Present Weather Sensor• Determines hydrometeor size and velocity;

rain rate and visibility.• Unique phase Doppler anemometry system

with four infrared lightsheets and two receptors.

• Rain, drizzle, snow, hail and graupel are amongst the precipitation types identifiable.

• Designed for long term, unattended operation.

• Open data access means full particle size and velocity data set is available.

• Integral dirty window detector.• Complete with field calibration fixture.

Campbell Scientific Data Loggers all:

• Initiate measurement & control functions based on time or event

• Control external devices such as pumps, motors, alarms, freezers & valves

• Operate independently of ac power, computers, & human interaction.

• Use our PC support software for programming.• Consume minimal power from a 12Vdc Source• Interface with on-site and telecommunication devices.• Measures sensors• Process data on-board.

Data Acquisition

For further informationPlease visit

www.CampbellSci.eu.