we provide exceptional quality project management, multi ... · to comply with malaysian law of...
TRANSCRIPT
QMEC Company Profile 1
We provide exceptional Quality project Management, multi disciplinary Engineering design and Construction consultancy
QMEC Company Profile 2
INTRODUCTION &BACKGROUND
3
COOPORATEINFORMATION
4
SCOPE OF SERVICES 5
ORGANIZATIONCHART
11
PROJECTEXPERIENCES
12
PRINCIPAL RESUME 14
BEM CERTIFICATE 20
QMEC Consult Sdn Bhd. (QMEC) is formed in 2011 to provide a wide spectrumof engineering design services to the public and private sectors especially in oil& gas and petrochemical industries.
QMEC provides services primarily in the following areas:
1) Project management and planning
2) Feasibility studies
3) Basic engineering design
4) Detailed engineering design
5) Design safety review
6) Cost estimation
7) Tender preparation and documentation
8) Construction management and supervision.
9) Safety and environmental management
10) Drafting Services
11) Engineering and/or Corporate Information Management (DocumentControl Management)
12) Authority Approvals
Our Head Office is located at K 8813-E2, Level 1, Bangunan MPK, 24300,Kerteh, Kemaman. We also have a satellite office in Kuala Terengganu.
Our resources enable us to provide complete engineering services for small tomedium-sized projects from conceptual / feasibility studies, planning, budgetpreparation, detailed design and drafting, management of construction andcommissioning support.
Where necessary, we are also able to provide further resources on the followingcapabilities through association with specialist firms, which will be integratedinto our project team:
Acoustic induced vibration study
Noise study
Architectural design
Safety Reviews, audits and training
Risks based inspection
QMEC Company Profile 3
QMEC Company Profile 4
Company Name:
Company No:
QMEC Consult Sdn Bhd.
952590-D
Contact persons: 1) Ir. Hj. Rosdan Bin Ismail (ManagingDirector)
2) Ir. Wan Mohd Hazairin Bin Wan Daud(Executive Director)
Business Address: K 8813-E2, Level 1Bangunan MPK,24300, Kerteh, Kemaman,Terengganu, Malaysia.
Telephone No : Tel : +609 826 1234Fax : +609 826 1234
Emails : 1) [email protected]) [email protected]
Website www.qmec.com.my
Date ofIncorporation
July 2011
Authorizedcapital
RM 100,000.00
Paid-up Capital RM 51,000.00
Equity Ownership 100% Bumiputra
Bankers Maybank Islamic
CompanySecretary
MCM Corporate Services Sdn Bhd
Auditor
QMEC has the capability to provide exceptional services which includethe following disciplines but not limited to:
◦ 1) Mechanical Building Services Engineering
◦ 2) Piping and Process Engineering
◦ 3) Civil and Structural Engineering
◦ 4) Electrical and Instrumentation Engineering
◦ 5) Construction Management and Supervision
QMEC Company Profile 5
Mechanical building services account for around 30% of the capital and 50% ofthe operating cost for a typical office, and substantially more in highly servicedbuildings such as hospitals. We play a central role in creating comfort, safe andlow operating and maintenance cost of the buildings by employing best andlatest technology solutions
QMEC primary service areas includes:
Heating, Ventilation and Air Conditional system
Fire Fighting System,
Fire Detection and Alarm system
Plumbing and Sanitary System
Sewerage system
QMEC Company Profile 6
Piping and process transfer modification/ change is basic need forpetrochemical plant for its improvement and sustainability.
Good industry practice require all process and plant modification shall beundertaken by competent and experience personnel to ensure plant andhuman safety are well safeguarded
Our wide experience in oil and gas industries in the following areas willhelp client for their modification project executed safe and successfully.
Technical and purchase specification of rotating equipment, vessels,pumps, heat exchangers, piping systems for offshore, oil and gasfacilities and onshore petrochemical plant.
Piping stress analysis (Static & Dynamic) using CAESAR II
Conceptual studies and Basic Engineering Design.
Detailed piping and pipe support engineering design.
3D piping modeling using CADWorx.
Hydraulic study (Line Sizing and Pump Sizing)
Tender document for procurement and construction contractor
Bid tabulation and evaluation support.
Project management and construction / installation supervision
Material take-off exercise
Cost estimation
Liaison with manufacturer and vendors assessment.
Fire risk assessment and fire fighting system modification.
QMEC Company Profile 7
Civil and structural engineering is a basic discipline where allprojects require civil engineer(s) to deal with the infrastructuresdesign, construction and to compliment other engineering workin plant modification project.
Our expertise in this area include s:
Structural Engineering particularly to support architectsand/or clients.
Public health engineering such as drainage, sewerage andwater supply.
Public work engineering such as roads, bridges, and marinefacilities.
Technical management advisor to developers or contractorfor residential, commercial and industrial project.
Project management, planning and constructionsupervision.
Feasibility study and site investigation.
Geotechnical and foundation design.
Detailed structural engineering.
Civil and infrastructure engineering design.
Contract preparation and tender appraisal.
Contract administration
Drafting services
QMEC Company Profile 8
Our primary electrical services includes:
Electrical system studies
Equipment sizing & calculation
Equipment specification & datasheets
Cable Sizing
AC & DC UPS Sizing
Lighting Illumination Level
Equipment Heat Loss
Electrical system inspection and certification
Our primary instrumentation services includes:
Basic Engineering/Conceptual Design
Detailed Engineering
Instrument Design Basis
Process Control Strategies
Fire and Gas Detection Philosophies
Telecommunication Philosophies
Power Consumption Requirements
Instrument Schedule
Instrument Utility Requirement
Layout of Instrument
Control Basis & Interlock Diagram
Instrument Cable & Duct Routing
Panel Instrument Arrangement
Instrument Piping Hook-Up & Loop-Up
Wiring, Tubing & Utility Piping Layout
Instrument Bill of Quantity
Instrument Requisition
Review & Check Vendor Drawing
QMEC Company Profile 9
To comply with Malaysian LAW of UBBL 1984, part 11 clause 5:
We do have qualified persons (professional engineers) in all disciplines to manageand supervise your project for a successful completion.
QMEC Company Profile 10
MANAGING
DIRECTOR
PIPING &
MECHANICAL
Senior
Engineer
Engineer
Designer
ELECTRICAL&
INSTRUMENT
Senior
Engineer
Engineer
Designer
CIVIL &
STRUCTURE
Senior
Engineer
Engineer
Designer
PROCESS
Senior
Engineer
Engineer
Designer
EXECUTIVE
DIRECTOR
QMEC Company Profile 11
PROJECT CLIENT VALUE
Engineering For Control RoomExtension
MMC RM165K
Provision of Engineering Design c/wCalculation, Drawings, PE endorsementand Authority Approval
Polyplastic Asia RM4.5K
Provisional of Mechanical EngineeringServices
MMC RM250Kp.a
Provisional of Electrical EngineeringServices
MMC RM250Kp.a
Detail Engineering Design for WasteWater Plant Modification
UBF RM94K
Provision Work For Tank D-977 asBuilting Work
Dialog RM21K
PE Endorsement for Skid Installation atT-COT
Dermaga O&G RM17K
Engineering Services & PE Endorsement Safarida Jaya RM1.6K
Engineering Services of Fast Loop AutoSampling System Structure
Dermaga O&G RM8.4K
Pipe Stress Analysis Dermaga O&G RM4K
Weight and Dimension EstimationReport
Synergy RM6.8K
As-Built for Larut Modification Baxtech RM4.4K
Structural Analysis of CondensateDrum PE-O-V-506 Replacement.
Dialog RM30K
Engineering Design for Instrument AirVessel
MIE RM9K
Upgrading Bunkering System for ASBLabuan
MIE RM49K
QMEC Company Profile 12
QMEC Company Profile 13
PROJECT CLIENT VALUE
Proposal for CCC Application forChemical Storage, Marine Hose Shed,Central Registry
MMC RM111K
Additional cost for Bunkering SystemAt ASB Labuan - Piping
MIE RM15K
Note: The detail project experience will be made available upon request.
PRESENT POSITION :MECHANICAL & PIPING PRINCIPAL
NAME :Ir. ROSDAN BIN ISMAIL P.Eng. MIEM.
DATE OF BIRTH :13th June 1979
MARITAL STATUS :Married
NATIONALITY :Malaysian
LANGUAGES :Bahasa Malaysia & English
QUALIFICATION :
-Bachelor in Mechanical Engineering from University Kebangsaan Malaysia.
-Familiar in ASME B31.3 Piping Flexibility Analysis.
PROFESSIONAL ASSOCIATION :
-Registered Professional Engineer. BEM no : 14828
-Member of Institute of Engineers Malaysia (MIEM) No: 24223
COMPUTER SKILLS :
CAESAR II, PVELITE, HTRI, TANK, STAAD Pro, Microsoft office, Microsoft Project,AutoCAD and etc
SUMMARY OF EXPERIENCE
Ten (10) years experience as mechanical and piping engineering designwork in petrochemical, oil and gas industry and about two (2) years in structureand process piping fabrication, installation and pre commissioning work inpetrochemical plants.
Directly involved in the Front End Engineering Design, Basic Design andDetail Engineering of various mechanical/equipment and piping work.
The nature of activities includes the preparation of engineeringdeliverables such as technical specifications, technical requisitions, bidevaluation, vendor data review, engineering procedures and design calculations.
Well experienced in piping layout development and pipe stress analysisof process piping. The work includes pipe flexibility and stress check, design ofpipe supports, equipment nozzle check, preparation of stress, displacement,restrains report, design basis, material specification selection and etc. Wellexposed in both onshore and offshore mechanical and piping design projects.
Capable in reviewing and analyzing drawings such as P&ID, EquipmentLayout, GA, pipe support details, Isometric and Piping Plans. Familiar withinternational design codes and standards i.e. ASME, ANSI, API, ASTM, NFPA as wellas customer specific standards like PTS and DEP. Experienced in utilizing designsoftware such as CAESAR II and PVelit for piping and pressure vessel design. I’malso capable in rotation equipment sizing and selection especially for pumps andcompressor.
Working experiences also includes engineering in commercial buildingmechanical services e.g. HVAC design, cold water plumbing system, sanitarysystem, fire fighting system, piping/mechanical specifications, bill of quantity,equipment requisitions, Technical Bid Evaluation/Tabulation, Vendor Data Reviewand construction management and supervision work.
QMEC Company Profile 14
PRESENT POSITION :ELECTRICAL & INSTRUMENT PRINCIPAL
NAME :Ir. WAN MOHD HAZAIRIN WAN DAUD
P.Eng. MIEM.
DATE OF BIRTH :11th Jan 1977
MARITAL STATUS :Married
NATIONALITY :Malaysian
LANGUAGES :Bahasa Malaysia & English
QUALIFICATION :
-Bachelor in Electrical and Electronic Engineering from UniversityMalaysia Sabah.
-Familiar in most electrical international standard e.g. IEC and BS.
PROFESSIONAL ASSOCIATION :
-Registered Professional Engineer.
-Member of Institute of Engineers Malaysia (MIEM)
SUMMARY OF EXPERIENCE
Eleven (11) years experience as electrical andinstrumentation engineering design work in petrochemical, oil andgas industry and about two (2) years in electrical inspection work.
Directly involved in the Front End Engineering Design, BasicDesign and Detail Engineering of various electrical and instrumentwork.
The nature of activities includes the preparation ofengineering deliverables such as technical specifications, technicalrequisitions, bid evaluation, vendor data review, engineeringprocedures and design calculations.
Well experienced in electrical and instrument system. Thework includes identifying customer requirements, designing systems,develop design specifications and technical drawings, researchingsuitable solutions and estimating costs and timescales, liaising withothers in the design team, liaising with clients and contractors,attending meetings on site, designing and conducting tests, servicingand maintaining equipment, preparing tender documentation, writingreports and giving presentations.
Working experiences also includes engineering in commercialbuilding electrical services, electrical inspection, vendor data reviewand construction management and supervision work.
QMEC Company Profile 16
PRESENT POSITION :CIVIL & STRUCTURE PRINCIPAL
NAME :Ir. MOHAMAD YUSRI M. YACOB
P.Eng. MIEM.
DATE OF BIRTH :15th April 1977
MARITAL STATUS :Married
NATIONALITY :Malaysian
LANGUAGES :Bahasa Malaysia & English
QUALIFICATION :
-Bachelor in Civil Engineering from University Sains Malaysia
-Familiar in most civil related international code and standards.
PROFESSIONAL ASSOCIATION :
-Registered Professional Engineer. 13440
-Member of Institute of Engineers Malaysia (MIEM)
SUMMARY OF EXPERIENCE
Eleven (11) years experience as civil and structural engineeringdesign work for commercial buildings. I used to be engineer in-charge formulti million worth project such as terrace houses , shop houses, Marangdistrict police head office, bridges and etc with previous employer namelyPerunding C&S, Technipro Consult Sdn Bhd and Jannacks Consultant Sdn Bhd
Directly involved in tender proposal, engagement of subconsultants, monitoring and coordination of engineering work by in-housestaffs and associates. Familiar with local authority requirement andprocedures for regulation compliance.
The nature of activities includes the preparation of engineeringdeliverables such as technical specifications, technical requisitions,engineering drawings, bill of quantities, bid evaluation, vendor data review,engineering procedures , design calculations and authority approval matters.
I’m also used to be resident engineer to monitor and manageconstruction issues to ensure all constructions work met design specificationand completed within the approved duration. On site, I shall providetechnical advice regarding design, construction, or program modificationsand structural repairs.
In addition to the above I’m responsible to analyze survey reports,maps, drawings, blueprints, aerial photography, and other topographical orgeologic data to plan projects. Plan and design transportation or hydraulicsystems and structures following construction and government standards,
Familiar and hands on with infrastructure software and drawingtools to enable delivery per client expectation.
QMEC Company Profile 18