we keep the world in motion. - elin · pdf filepage 18 we keep the world in motion. •...

January 2018

We Keepthe Worldin Motion.

Company presentationwww.elinmotoren.at

We Keep the World in Motion.

... in Motion.

What you can expect from ELIN Motoren:

• high industrial standards based on decades of experience

• highest quality drive solutions at competitive prices

• application know-how in the defined market sectors

• the commitment of an innovative company

• personal customer service at all levels

• after sales services & life cycle support


A Global Player for Electrical Drives…

• Generators for wind energy and decentralized energy systems

• Motors for industrial plant applications, marine, oil & gas, power plants, plastics & tunneling

• AC traction motors air and liquid cooled

• Traction drives (motor and gear)

• Traction generators, synchronous and asynchronous

Traktionssysteme Bosnia d.o.o. (Tuzla, BiH)

Medha Traction Equipment Ltd.(Hyderabad, India)

Traction Systems Inc.(Somerville, NJ / USA)

TRASYSBeteiligungs- und Management GmbH

Suzlon Generators Ltd.(Pune, India)

ELIN Motors Bosnia d.o.o.(Živinice, BiH)

Nordmetal Kft.(Bátonyterenye, Ungarn)


Organisation


... in motion.

Profit from our experience in the following sectors :

Industrial Plant ApplicationsAsynchronous motors with squirrel cage and slip ring rotor, motors IP68 and motors for operation with frequency converters for cement plants, opencast mining, steel plants, chemical plants, water & environment, seawater desalination plants, pulp & paper, test rig motors, applications for industrial plants

Decentralized Energy Systems Synchronous generators for steam turbines (industrial turbines)Hydro power (small and medium power), gas turbines, gas motorsAsynchronous generators for Hydro power (small power)

Power Plants Three-phase short circuit motors for operation on mains as well as operation on mechanically or electrically speed regulated drive systems for all forms of large thermal power plants.


... in motion.

Profit from our experience in the following sectors :

Plastics & Tunneling Water jacket cooled low voltage motors for tunnel boring, vertical and shaft drill units, underground mining, extruder and compounder, mixer and kneader, injection moulding machines, roller mills, metallurgy, pumps and presses

Marine, Oil & GasAsynchronous and slip ring motors for up-, mid- & downstream solutions, petrochemistry, air separation, compressors and pumps as well as explosion proof applications (Ex n, e, p).Certified solutions for marine applications requirements (ABS, Bureau Veritas, DNV, KR, LR,…)

Wind Energy Asynchronous and synchronous generators(conventional, DFIG‘s, PMG's), On- und offshore


200

1,000

2,000

35,000

10,000

750

2,500

500

5,000

65,000

Wind EnergyThree-Phase Squirrel Cage andSlip Ring Generators

PlasticsTunnelingMining

Three-Phase Squirrel Cage Motors

Compressor DrivesIndustrial Plant ApplicationsPower Plants

Three-Phase Squirrel Cage and Slip Ring Motors

Decentralized Energy Systems Syn chronous & Asynchronous Generators

20,000

Power Ranges

kW / kVA


• Inspection

• Diagnostics

• Documentation

• Technical Support

• After Sales Services

• Spare Parts

• Maintenance and Maintenance Agreements

• Repair and Reconditioning of ELIN or othermanufacturers‘ products

• Installation and Commissioning

Service


Service

• Technical project management

• International service and local support by our certified service partners (see above)

• Full support over the whole life cycle of the machines


Selected Certificates

• EN ISO 9001:2015issued 2017, ISO 9001 original approval in 1996

• EN ISO 14001:2015 issued 2017, ISO 14001 original approval in 2016

• BS OHSAS 18001:2007 issued 2017, OHSAS 18001 original approval in 2011

• Underwriters Labs, issued 2001

• ATEX Compliance, issued 2003, renewed 2017

• ANZEx, issued 2006

• Certificate according to ISO 3834-2, issued 2017, original approval in 2012

• Certificates for “Marine” (ABS, BV, DNV, KR, LR,…)EN ISO 9001:2015


History

• Foundation of F. Pichler Werke / Weiz 1892

• Renamed ELIN 1908

• ELIN becomes a 100 % subsidiary of the newly founded Austrian Industries AG (which is 100 % owned by ÖIAG) 1989

• ELIN Motoren becomes an independent companywithin VA Technologie AG, which itself was spun off from Austrian Industries AG 1993

• Going public of VA Technologie AG (Vienna Stock Exchange) 1994

• TRASYS buys 80,1% shares of ELIN Motoren GmbH 2002

• Joint Venture with Suzlon Generators Ltd., Pune / India 2004

• TRASYS becomes 100% owner of ELIN Motoren GmbH 2005

• New premises in Preding/Weiz 2009

• Foundation of the subsidiary ELIN Motors Bosnia d.o.o., Živinice/BiH 2015

• Acquisition of Nordmetal Kft., Bátonyterenye/H 2017


Preding/Weiz

• Research and Production Centre: built in 2008

• Plant area: 50,000 m²• Production: 17,000 m²• Offices: 5,000 m²

• Height of shop floor: up to 12 m

• Length: 240 m• Width: 70 m

• Crane capacity: up to 80 to, 8.25 m

• Connected load: 5 MW


Lamination Shop

• Lamination Shop: built in 2001

• Plant area: 3,000 m²• Production: 2,000 m²• Warehouse: 1,000 m²

• Crane capacity: up to 25 to, 8.5 m


Test Field

• Testing of synchronous, asynchronous and directcurrent machines

• Feed voltage: AC: 400 V up to 15 kVDC: up to 600 V

• Power: up to 6 MW directcoupling

• Alternative load testingfor asynchronousmachines up to 15 MW

• Alternative testing forsynchronous machinesup to 65 MVA


All our efforts revolve around our customers ' success.


• Type: HKM110D04• Power: 13500 kW• Voltage: 10 kV• Frequency: 50 Hz• Speed: 1478 rpm• Cooling: Air / water cooled• Quantity: 1 piece

• Application: Pump

• Highlight: Start-up at 75 % of thenominal voltageagainst full resistingmoment of the pump.

Best efficiency (>97 %) at 75 % of thenominal power (usualoperation point of thisapplication)

Project: Boxberg Power Plant Block R - BFP

Location: Germany

Year: 2009

Copyright: Vattenfall Europe


• Type: HKM111Z10• Power: 11000 kW• Voltage: 10 kV• Frequency: 50 Hz• Speed: 592 rpm• Cooling: Air / water cooled• Quantity: 2 pieces

• Application: Fan

• Highlight: Power plant design standard: Start-upafter voltage dropagainst open valveand partial voltage≥ 80 % with reduced

start-up current. Focus on low noise level.

Project: Moorburg – ID-Fan

Location: Hamburg, Germany

Year: 2012


• Type: HRH-063 P14• Power: 960 kW• Voltage: 3.3 kV• Frequency: 50 Hz• Speed: 421 rpm• Cooling: Exhaust air

discharged by a conduit

• Quantity: 20 pieces

• Application: Pipe cased shaftpump

• Highlight: Vertical installationon pipe cased shaftpump with lowvibrations (between0.12 and 0.48 mm/sec measured) / automatic brushlifting device

Project: White Nile Sugar

Location: SudanYear: 2006


• Type: HRR-010 Z06(526096)

• Power: 4300 kW• Voltage: 6300V• Frequency: 50 Hz• Speed: 992 rpm• Cooling: Tube cooled• Quantity: 1 pc

• Application: Raw Mill

• Highlight: 2nd shaft end

Amb. Temp.: 50°C

Project: Sarooj Busher

Location: IranYear: 2006


Project: Test Bench Drives

Location: GermanyYear: 2012

• Type: HKF and MKH• Power: 620 kW – 3200 kW• Voltage: 690 V – 3.3 kV• Frequency: 50 / 60 Hz• Speed: 0 - 3000 rpm• Cooling: Air/Water

& forced ventilationand water jacked

• Quantity: 11 pieces

• Application: Test field


• Type: MKH428W04• Power: 160 kW• Voltage: 400 V• Cooling: water – cooled• Quantity: Totally 82 Motors

• Appliance: Cutter Head Drive

Project: 8 TBM – Crossrail

Location: Great BritainYear: since 2011


• Type: dMCV, dPRW, dMKH• Power: 100 – 400 kW• Voltage: 400 – 1140 V• Cooling: water – cooled• Protectionclass: ATEX EN 60079

• Appliance: Cutter Head andHydraulic

Project: Mining and Tunneling

Location: WorldwideYear: since 1975


Project: Extruder for thermoplastic

Location: WorldwideYear: since 2000

• Type: various MKH-7/8• Power: 30 – 1320 kW• Voltage: 380 – 690 V • Cooling: water - cooled

• Appliance: Extruder

© Leistritz


• Type: HRM-080 C04• Power: 7,850 kW• Voltage: 6,000 V• Frequency: 60 Hz• Cooling: Air/ Water• Quantity: 3

• Application: Turbo compressorSiemens

• Highlight: KOSHA Design

Exp IIC Zone2design

Brush lifting device

Start via liquid starter

Project: Siemens / „POSCO Korea“

Location: KoreaYear: 2012


• Type: HKM-171 E02• Power: 5,300 kW• Voltage: 6,000 V• Cooling: Air/ Water• Quantity: 3

• Application: Cameron Compressor

• Highlight: Exp IIB T3, Zone2

Balancing G0,8

Shaft vibration max. 25µm p-p

High level of auxiliaries

Starting current 3,9xFLC via soft starter

GOST+ RTN

Project: GEA / „LUKOIL - Krasnodar“

Location: RussiaYear: 2010


• Type: MCZ-545 N04• Power: 1,400 kW• Voltage: 690 V• Cooling: Water Jacket cooled• Quantity: 3

• Application: Reciprocatingcompressor

• Highlight: DNV Certified

Double shaft endIM2202

Flange mounted

Operation on exploration ships

Project: LMF / „Western GECO“

Location: all over the worldYear: 2012


• Type: MRM-063 Z06• Power: 3,100 / 3,400 kW• Voltage: 660 V• Speed: 1,010 rpm• Cooling: Air / water

• Application: Nordex N100 / N117 / N131 turbines

Project: Windpark „Janneby“

Location: GermanyYear: 2013


• Type: HRM-171 Z06• Power: 5,300 kW• Voltage: 6.3 kV• Speed: 1,006 rpm• Cooling: Air / water

• Application: Sinovel SL 5000

Project: Windpark „Donghai bridge“ (Off-shore)

Location: ChinaYear: 2011


Project: Torsvik

Location: Torsvik, SchwedenYear: 2004

• Type: HTM-110 D04• Power: 18,300 kVA• Voltage: 10.5 kV• Speed: 1,500 rpm• Cooling: Air - Water

• Application: Steam turbine(generator mountedgearbox)


Project: Envesta Energie- & Dienstleistungs GmbH

Location: KW JohnsbachYear: 1958

Service: Stator winding, new collector, 2011

• Type: Sy 4004 / E26• Power: 700 kVA• Voltage: 400 V • Current: 1010 A• Frequency: 50 Hz• Speed: 1,500 rpm• Make: ELIN


Project: KW Gaulwerk

Location: ImstYear: 1982

Service: Overhaul of synchronousgenerator, 2011

• Type: S 20012• Power: 1,000 kVA• Voltage: 5,250 V • Current: 318 A• Frequency: 50 Hz• Speed: 500 rpm• Make: ELIN


Project: KW Offensee 1

Location: EbenseeYear: 1908

Service: Renewal of stator winding,synchronous rotor

• Type: Wid 1020/500• Power: 1,200 kVA• Voltage: 3,000 V • Current: 231 A• Frequency: 50 Hz• Speed: 500 rpm• Make: SSW

we keep the world in motion. - elin · pdf filepage 18 we keep the world in motion. •...

Documents