wbsssss
TRANSCRIPT
-
8/3/2019 WBSSSSS
1/4
3.0
PLUMBING
1.0
CONCRETE
MAAHAD TAHFIZ AL FAJ
2.0
FRAMING
6.0
ROOFTING
5.0
INTERIOR
4.0
ELECTRICAL
6.1-INSTALL FELT
6.2-INSTALL
SHINGLES
6.3-INSTALL
VENTS
4.1-INSTALL WIRING
4.2-INSTAL
OUTLET/SWITCHES
4.3-INSTALL
FIXTURES
3.1-INSTALL WATER
LINES
3.2-INSTALL GAS
LINES
3.3-INSTALL BATH
AND KITCHEN
2.1- FRAME EXTERIOR
WALLS
2.2- FRAME INTERIORWALLS
2.3-INSTALL ROOFING
TRUSSES
1.1-POUR
FOUNDATION
1.2- INSTALL PATIO
1.3 STAIRWAY
5.1-INSTALL
DRYWALL
5.2-INSTALL
CARPET
5.3-PAINTING
-
8/3/2019 WBSSSSS
2/4
1.0ConcreteConcrete is the foundationofeverything fromhome patios tomiles of freeways, and it is theconcreteworkers' duties to
ensurethe safeand proper installationofa foundation
1.1. Pour Foundation
1.2 Install Patio
1.3 Pour Stairway
2.0 Framing
known as light-frame construction, is a building technique based around structural members,which provide a stable frame to
which interior and exterior wall coverings are attached, and covered by a roof comprising horizontal ceiling joists and sloping
rafters (together forming a truss structure) or manufactured pre-fabricated roof trussesall ofwhich are covered by various
sheathing materials to give weather resistance
2.1 Frame Exterior Walls
Exterior wall studs are the vertical members towhich the wall sheathing and cladding are attached. They are
supported on a bottom plate or foundation sill and in turn support the top plate
2.2 Frame Interior Walls
Interior partitions supporting floor, ceiling or roof loads are called load bearing walls; others are called non-
load bearing or simply partitions. Interior load bearing walls are framed in the same way as exterior walls
2.3 Install Roofing Trusses
Roofs are covered with shingles made of asphalt, fiberglass and small gravel coating, but a wide range of
materials are used. Molten tar is often used towaterproof flatter roofs. Steel panels are being used due to
durability. Slate or tile roofs offer more historic coverings for light-frame roofs.
-
8/3/2019 WBSSSSS
3/4
2.0PlumbingIs a circulatory system, running unseen behind the walls and under the floorboards, mysteriously carrying water to and from.
3.1 Install Water Lines
3.2 Install Gas Lines
3.3 Install Bathand Kitchen Fixtures
4.0 Electrical
Insulated conductors used to carry electricity, and associated devices. General aspects of electrical wiring as used to provide
power in buildings and structures.
4.1 Install Wiring
Wiring system install with relatively low power requirements, infrequent changes to the building structure and
layout, usually with dry, moderate temperature, and noncorrosive environmental conditions.
4.2 Install Outlets/Switches
Outlet and switches were installed in every room.
4.3 Install Fixtures
Fixtures install to complete the process.
5.0 Interior
Referto installation
5.1 Install Drywall
5.2 Install Carpets
-
8/3/2019 WBSSSSS
4/4
Carpet formosquearea
5.3 Install Painting
6.0 Roofing
6.1 Install Felt
6.2 Install Shingles
6.3 Install Vents