wbrs in operation. solution: utilize deckhead mounted handling hardware developed for seismic survey...
TRANSCRIPT
WBRS in Operation
Solution: utilize deckhead mounted handling hardware developed for seismic survey vessels. Many of these vessels have 2 mission bays
equipped with handling equipment for overboarding and moving payloads within these mission bays.
Unmanned vehicles & mission packages must be stowed and moved within mission bay
3
Seismic vessel deckhead mounted handling equipment
Telescoping 3 axis boom for handling and stowing air gun arrays
Seismic vessel deckhead mounted handling equipment
Telescoping booms with docking heads
to facilitate safe transfer launch,
recovery and stowage of seismic
sources
Telescoping Boom/Source Handling System
SWL of 6 tonne on each boom
can be designed to traverse entire width and length of mission bay
Overhead X-Y Crane for Open Deck
System is 27 m wide, can traverse the entire length of the 70 m deck, and can lift two 9.5 T packages. A separate telescoping boom is used to deploy the air guns.
Low profile ROV handling system - telescoping davit pivots to deploy payload closer to waterline
Moves athwartships on rails; alows multiple payloads to be handled
Stows flush with deckhead when not in use, providing clear deck space
Deckhead Mounted Over-the-Side Handling Equipment
Advanced Crane/Davits
For vessels with an open deck, USVs and UUVs could be handled with cranes that move on rails to cover the entire deck
Cranes can be fitted with custom docking heads suited to the payload
ASFA- automatic sea fastening systemKeeping deck cargo in place
New automated sea fastening system for positioning and securing cargo on the deck of supply vessels, greatly reducing the exposure of the crew to risk of injury