Ways To Improve Video Playback Quality On Roku Device

www.technicalbulls.com 1-855-856-2653

• We are going to discuss from the HBO GO channel perspective. What did her parents do?

• If it is not playing the videos properly or buffering takes time then you can follow the instructions

• Setup Roku account on your device then install the channels in your Roku feed screen with the help of Roku remote. What were her interests?

• You will get limited access to the channels without entering Roku link code for particular channel.

Description

• High speed internet connection is required for playing Full HD video contents from various channels.

• The minimum speed requirement for playing the Full HD videos is 3 MBPS.

• Internet speed tests can be performed through online software’s.

• You must take the reading at different time intervals so that you can cross check it.

1. Check the network speed

• Unplug the Roku device from the power source.

• Remove the power socket of router and modem.

• Connect the modem again then the router and wait for seconds so that lights will turn on.

• Connect the Roku with the TV now.

• Try to stream the HBO GO channel videos now. For more help and information, go to www support Roku com

2. Power cycle your device

To power cycle the connected device, go through the following points.

• Selection of best device for media streaming and downloading more and more channels from the private channel list.

• These channels are available free of cost.

• Uninstallation of channel from the list with the help of Roku remote

• Install the channel again from the Roku com link.

• You can add your favorite channel on Roku home screen with the help of Roku remote.

3. Try the streaming Tips from Roku

Sometimes the problem exist within the Wi-Fi network only and you are not able to stream the contents properly. The best solution to this problem is use of wired network for Roku device. To setup the network, follow the below mentioned points

• Go to the settings of Roku from home screen.

• Connect the Ethernet cable at the back of device

• Select the ‘wired’ network from the option.

• Click on ‘ok’ to connect to wire network.

4. Select the wired network

So, all these steps are useful for improving the performance and quality of video playback on Roku device.

Visit Us : www.technicalbulls.com

Call us or browse Roku com if you are still facing the same problem.