ADVANCED COMPOSITES PRIVATE LIMITED

WATER TREATMENT

ADVANCEDCOMPOSITESPRIVATE LIMITED

Plots 77, 78, 89 & 90, Bicholim Industrial Estate, Goa - 403 529, IndiaTel: +91 83 22 36 22 50 Fax: +91 83 22 36 22 27 Email: adcp@satyam.net.in

R.O. Pressure Vessels

Important handling instructions

Please note that R.O. pressure vessels are high pressure systems and have to be cor-rectly handled, installed, operated & maintained.

Do not open the vessel end fitments under any circumstances when thevessel is pressured which may lead to serious accidents.

Open the vessel end fitments only after verifying that the pressure in thevessel has been fully released.

Pressurise the vessel only after ensuring that all end fitment componentshave been fully secured and installed and that no corroded componentsare used.

Do not operate the vessel above rated operating pressure and tempera-ture above 49°c.

Do not operate vessel without both permeate ports being connectedto membrane elements with adaptors.

Do not operate vessel if the pressure at permeate port exceeds 100 psi.

Do carry out routine inpection of end closures to check for leaks or wetout and replace deteriorated components

Do ensure that there is no pressure in the permeate port.

Do ensure that piping connections and strappings do not hamper ex-pansion of vessel under operating pressure.

PS/11 / REV-00 / 10.01.2004

ADVANCED COMPOSITES PVT. LTD.

8" R.O. PRESSURE VESSEL- 250 PSI SIDE PORT

ITEM DESCRIPTION MATERIAL NO OFF 1 PRESSURE VESSEL GLASS FIBRE EPOXY RESIN 01 2 PERMEATE PORT UPVC 02 3 FEED/CONCENTRATE PORT SS 316 02 4 BACKING PLATE UPVC 02 5 END PLATE / BEARING PLATE ALU ALLOY B51 SWP 02 6 LOCKING RING SS 316 06 7 ADAPTOR UPVC 02 8 SNAP RING I STAINLESS STEEL 02 9 SNAP RING II STAINLESS STEEL 02

10 LOCKING BOLT STAINLESS STEEL 06 11 SPACER PIPE UPVC 01 12 ‘O’SEAL BACKING PLATE EPDM 02 13 ‘O’SEAL BACKING PLATE / PERMEATE PORT EPDM 02 14 ‘O’SEAL FEED CONC. PORT EPDM 02 15 ‘O’SEAL PERMEATE PORT / ADAPTOR EPDM 02 16 ‘O’SEAL ADAPTOR / MEMBRANE EPDM 02 17 STRAP SS / NEOPRENE 02 18 SADDLE NATURAL RUBBER 02

NOTE:- PERMEATE PORT CONNECTION SHOULD BE 1” NPT ONLY. STRAP & SADDLE 3 NOS EACH FOR 5E & 6E R.O. PRESSURE VESSEL.

Regd. Office & Works : Plot nos 77,78,89 & 90 , Bicholim Industrial Estate, Goa.- 403 529 Tel : (0832) 2362250 / 2362265 Fax : (0832) 2362227 / 2363907

E-MAIL : adcp@satyam.net.in

NO OF 40”(E)

PORT TO PORT LENGTH (±3 mm)

DISTANCE BETWEEN SUPPORTS , MIN/MAX -mm

MAX VESSEL WEIGHT INCLUDING END FITTINGS,

Kg 1 1137 475 - 850 44 2 2153 575 - 1860 51 3 3198 900 - 2850 58 4 4185 1990 - 3210 65 5 5201 2910 - 3510 72 6 6217 3800 - 4010 79

PS/12 / REV-00 / 10.01.2004

ADVANCED COMPOSITES PVT. LTD.

8" R.O. PRESSURE VESSEL- 300 PSI SIDE PORT

ITEM DESCRIPTION MATERIAL NO OFF 1 PRESSURE VESSEL GLASS FIBRE EPOXY RESIN 01 2 PERMEATE PORT UPVC 02 3 FEED/CONCENTRATE PORT SS 316 02 4 BACKING PLATE UPVC 02 5 END PLATE / BEARING PLATE ALU ALLOY B51 SWP 02 6 LOCKING RING SS 316 06 7 ADAPTOR UPVC 02 8 SNAP RING I STAINLESS STEEL 02 9 SNAP RING II STAINLESS STEEL 02

10 LOCKING BOLT STAINLESS STEEL 06 11 SPACER PIPE UPVC 01 12 ‘O’SEAL BACKING PLATE EPDM 02 13 ‘O’SEAL BACKING PLATE / PERMEATE PORT EPDM 02 14 ‘O’SEAL FEED CONCENTRATE PORT EPDM 02 15 ‘O’SEAL PERMEATE PORT / ADAPTOR EPDM 02 16 ‘O’SEAL ADAPTOR / MEMBRANE EPDM 02 17 STRAP SS / NEOPRENE 02 18 SADDLE NATURAL RUBBER 02

NOTE:- PERMEATE PORT CONNECTION SHOULD BE 1” NPT ONLY.

STRAP & SADDLE 3 NOS EACH FOR 5E & 6E R.O. PRESSURE VESSEL.

Regd. Office & Works : Plot nos 77,78,89 & 90 , Bicholim Industrial Estate, Goa.- 403 529 Tel : (0832) 2362250 / 2362265 Fax : (0832) 2362227 / 2363907

E-MAIL : adcp@satyam.net.in

NO OF 40”(E)

PORT TO PORT LENGTH (±3 mm)

DISTANCE BETWEEN SUPPORTS , MIN/MAX -mm

MAX VESSEL WEIGHT INCLUDING END FITTINGS,

Kg 1 1137 475 - 850 46 2 2153 575 - 1860 54 3 3198 900 - 2850 63 4 4185 1990 - 3210 71 5 5201 2910 - 3510 78 6 6217 3800 - 4010 88

PS/13 / REV-00 / 10.01.2004

ADVANCED COMPOSITES PVT. LTD.

8" R.O. PRESSURE VESSEL- 400 PSI SIDE PORT

ITEM DESCRIPTION MATERIAL NO OFF 1 PRESSURE VESSEL GLASS FIBRE EPOXY RESIN 01 2 PERMEATE PORT UPVC 02 3 FEED CONCENTRATE PORT SS 316 02 4 BACKING PLATE UPVC 02 5 END PLATE / BEARING PLATE ALU ALLOY B51 SWP 02 6 LOCKING RING SS 316 06 7 ADAPTOR UPVC 02 8 SNAP RING I STAINLESS STEEL 02 9 SNAP RING II STAINLESS STEEL 02

10 LOCKING BOLT STAINLESS STEEL 06 11 SPACER PIPE UPVC 01 12 ‘O’SEAL BACKING PLATE EPDM 02 13 ‘O’SEAL BACKING PLATE / PERMEATE PORT EPDM 02 14 ‘O’SEAL FEED CONCENTRATE PORT EPDM 02 15 ‘O’SEAL PERMEATE PORT / ADAPTOR EPDM 02 16 ‘O’SEAL ADAPTOR / MEMBRANE EPDM 02 17 STRAP SS / NEOPRENE 02 18 SADDLE NATURAL RUBBER 02

NOTE:- PERMEATE PORT CONNECTION SHOULD BE 1” NPT ONLY.

STRAP & SADDLE 3 NOS EACH FOR 5E & 6E R.O. PRESSURE VESSEL.

Regd. Office & Works : Plot nos 77,78,89 & 90 , Bicholim Industrial Estate, Goa.- 403 529 Tel : (0832) 2362250 / 2362265 Fax : (0832) 2362227 / 2363907

E-MAIL : adcp@satyam.net.in

NO OF 40”(E)

PORT TO PORT LENGTH (±3 mm)

DISTANCE BETWEEN SUPPORTS , MIN/MAX -mm

MAX VESSEL WEIGHT INCLUDING END FITTINGS,

Kg 1 1137 475 - 850 50 2 2153 575 - 1860 60 3 3198 900 - 2850 71 4 4185 1990 - 3210 81 5 5201 2910 - 3510 91 6 6217 3800 - 4010 102

PS/14 / REV-00 / 10.01.2004

ADVANCED COMPOSITES PVT. LTD.

8" R.O. PRESSURE VESSEL- 600 PSI SIDE PORT

ITEM DESCRIPTION MATERIAL NO OFF 1 PRESSURE VESSEL GLASS FIBRE EPOXY RESIN 01 2 PERMEATE PORT UPVC 02 3 FEED/CONCENTRATE PORT SS 316 02 4 BACKING PLATE UPVC 02 5 END PLATE / BEARING PLATE ALU ALLOY B51 SWP 02 6 LOCKING RING SS 316 06 7 ADAPTOR UPVC 02 8 SNAP RING I STAINLESS STEEL 02 9 SNAP RING II STAINLESS STEEL 02 10 LOCKING BOLT STAINLESS STEEL 06 11 SPACER PIPE UPVC 01 12 ‘O’SEAL BACKING PLATE EPDM 02 13 ‘O’SEAL BACKING PLATE / PERMEATE PORT EPDM 02 14 ‘O’SEAL FEED CONCENTRATE PORT EPDM 02 15 ‘O’SEAL PERMEATE PORT / ADAPTOR EPDM 02 16 ‘O’SEAL ADAPTOR / MEMBRANE EPDM 02 17 STRAP SS / NEOPRENE 02 18 SADDLE NATURAL RUBBER 02

NOTE:- PERMEATE PORT CONNECTION SHOULD BE 1” NPT THREAD ONLY.

STRAP & SADDLE 3 NOS EACH FOR 5E & 6E R.O. PRESSURE VESSEL.

Regd. Office & Works : Plot nos 77,78,89 & 90 , Bicholim Industrial Estate, Goa.- 403 529 Tel : (0832) 2362250 / 2362265 Fax : (0832) 2362227 / 2363907

E-MAIL : adcp@satyam.net.in

NO OF 40”(E)

PORT TO PORT LENGTH (±3 mm)

DISTANCE BETWEEN SUPPORTS , MIN/MAX -mm

MAX VESSEL WEIGHT INCLUDING END FITTINGS, Kg

1 1137 475 - 850 61 2 2153 575 - 1860 76 3 3198 900 - 2850 89 4 4185 1990 - 3210 104 5 5201 2910 - 3510 121 6 6217 3800 - 4010 135

ADVANCED COMPOSITES PRIVATE LIMITED

PLOTS 77,78,89 & 90,

BICHOLIM INDUSTRIAL ESTATE

GOA 403 529, INDIA

adcp@satyam.net.in

+ 91 83 22 36 22 50

+ 91 83 22 36 22 65 TEL

+ 91 83 22 36 22 27

+ 91 83 22 36 39 07 FA

X