water lubricated air-ends wl - gci-consultinggci-consulting.de/pdf/2007_srm_gci_presentation.pdfgci...
TRANSCRIPT
![Page 1: WATER LUBRICATED Air-Ends WL - GCI-Consultinggci-consulting.de/pdf/2007_SRM_GCI_Presentation.pdfGCI distributes WL Air-ends and support OEM Customers re Water Screw Packaging due to](https://reader033.vdocuments.us/reader033/viewer/2022041418/5e1cfc9f20936033de769b1e/html5/thumbnails/1.jpg)
www.rotor.se
WATER LUBRICATED Air-Ends WL
![Page 2: WATER LUBRICATED Air-Ends WL - GCI-Consultinggci-consulting.de/pdf/2007_SRM_GCI_Presentation.pdfGCI distributes WL Air-ends and support OEM Customers re Water Screw Packaging due to](https://reader033.vdocuments.us/reader033/viewer/2022041418/5e1cfc9f20936033de769b1e/html5/thumbnails/2.jpg)
www.rotor.se
Water Lubricated Compressor Market
Oil free air market:
• Few suppliers / High entry barriers
• High margin applications
• Competition with dry screws/hook/claw/piston compressors.
(Better efficiency, lower air-end cost and noise/vibrations, no gear box oil mist)
• Atlas, IHI, Kobe, Hitachi, Mitsui-Seiki, Gardner Denver, SRM Oil injected air market
• High competition / Low entry barriers
• Increasing cost for separation/filtration of oil carry-over
• Increasing cost for condensate removal
(Similar high volume cost, similar efficiency, ”old vs new”)
• Low cost suppliers on ”their way”
![Page 3: WATER LUBRICATED Air-Ends WL - GCI-Consultinggci-consulting.de/pdf/2007_SRM_GCI_Presentation.pdfGCI distributes WL Air-ends and support OEM Customers re Water Screw Packaging due to](https://reader033.vdocuments.us/reader033/viewer/2022041418/5e1cfc9f20936033de769b1e/html5/thumbnails/3.jpg)
www.rotor.se
Development history of SRM Water-Lubricated-Air-ends
![Page 4: WATER LUBRICATED Air-Ends WL - GCI-Consultinggci-consulting.de/pdf/2007_SRM_GCI_Presentation.pdfGCI distributes WL Air-ends and support OEM Customers re Water Screw Packaging due to](https://reader033.vdocuments.us/reader033/viewer/2022041418/5e1cfc9f20936033de769b1e/html5/thumbnails/4.jpg)
www.rotor.se
Composite Rotor Manufacturing
Drivers: • Tribology• Cost
Applications: • Water lubricated• Oil lubricated compressors• Dry compressors
![Page 5: WATER LUBRICATED Air-Ends WL - GCI-Consultinggci-consulting.de/pdf/2007_SRM_GCI_Presentation.pdfGCI distributes WL Air-ends and support OEM Customers re Water Screw Packaging due to](https://reader033.vdocuments.us/reader033/viewer/2022041418/5e1cfc9f20936033de769b1e/html5/thumbnails/5.jpg)
www.rotor.se
Rotor molding process
• Mold and shaft preparation• Filling• Curing• Ejection• Post-curing• Quality control
![Page 6: WATER LUBRICATED Air-Ends WL - GCI-Consultinggci-consulting.de/pdf/2007_SRM_GCI_Presentation.pdfGCI distributes WL Air-ends and support OEM Customers re Water Screw Packaging due to](https://reader033.vdocuments.us/reader033/viewer/2022041418/5e1cfc9f20936033de769b1e/html5/thumbnails/6.jpg)
www.rotor.se
• Polymer rotors• Water lubricated bearings• Shaft seal has no pressure difference
1999: Water lubricated Air-end WL 37
![Page 7: WATER LUBRICATED Air-Ends WL - GCI-Consultinggci-consulting.de/pdf/2007_SRM_GCI_Presentation.pdfGCI distributes WL Air-ends and support OEM Customers re Water Screw Packaging due to](https://reader033.vdocuments.us/reader033/viewer/2022041418/5e1cfc9f20936033de769b1e/html5/thumbnails/7.jpg)
www.rotor.se
SRM profilesManufacturing Application
• Tool wear• Release• Lobe deformation• Tolerances• Measurability
• Lubrication• Clearances• Dynamics• Flow• Material
![Page 8: WATER LUBRICATED Air-Ends WL - GCI-Consultinggci-consulting.de/pdf/2007_SRM_GCI_Presentation.pdfGCI distributes WL Air-ends and support OEM Customers re Water Screw Packaging due to](https://reader033.vdocuments.us/reader033/viewer/2022041418/5e1cfc9f20936033de769b1e/html5/thumbnails/8.jpg)
www.rotor.se
G-profile
• Self limiting wear-in effect compensates for manufacturing errors
• Low contact stress
• Shorter sealing line
• Larger theoretical discharge port
![Page 9: WATER LUBRICATED Air-Ends WL - GCI-Consultinggci-consulting.de/pdf/2007_SRM_GCI_Presentation.pdfGCI distributes WL Air-ends and support OEM Customers re Water Screw Packaging due to](https://reader033.vdocuments.us/reader033/viewer/2022041418/5e1cfc9f20936033de769b1e/html5/thumbnails/9.jpg)
www.rotor.se
male drive sidefemale drive side
The G-radius
![Page 10: WATER LUBRICATED Air-Ends WL - GCI-Consultinggci-consulting.de/pdf/2007_SRM_GCI_Presentation.pdfGCI distributes WL Air-ends and support OEM Customers re Water Screw Packaging due to](https://reader033.vdocuments.us/reader033/viewer/2022041418/5e1cfc9f20936033de769b1e/html5/thumbnails/10.jpg)
www.rotor.se
Efficiency
![Page 11: WATER LUBRICATED Air-Ends WL - GCI-Consultinggci-consulting.de/pdf/2007_SRM_GCI_Presentation.pdfGCI distributes WL Air-ends and support OEM Customers re Water Screw Packaging due to](https://reader033.vdocuments.us/reader033/viewer/2022041418/5e1cfc9f20936033de769b1e/html5/thumbnails/11.jpg)
www.rotor.se
Efficiency comparison between GVM and SRM water lubricated airends
50
55
60
65
70
75
80
85
90
10 15 20 25 30 35 40
Tip-speed [rpm]
Eff
icie
ncy
K-376SRM
GVMDLWW22-10
vol eff
vol eff
adb eff
adb eff
Pressure ratio : 8.0Inlet pressure : 1 barInlet temperature : 25 deg CAir discharge temperature: 40 deg C
![Page 12: WATER LUBRICATED Air-Ends WL - GCI-Consultinggci-consulting.de/pdf/2007_SRM_GCI_Presentation.pdfGCI distributes WL Air-ends and support OEM Customers re Water Screw Packaging due to](https://reader033.vdocuments.us/reader033/viewer/2022041418/5e1cfc9f20936033de769b1e/html5/thumbnails/12.jpg)
www.rotor.se
2001: Prototype water lubricated Screw- Package
Water treatment
Water separation
Endurancetesting
![Page 13: WATER LUBRICATED Air-Ends WL - GCI-Consultinggci-consulting.de/pdf/2007_SRM_GCI_Presentation.pdfGCI distributes WL Air-ends and support OEM Customers re Water Screw Packaging due to](https://reader033.vdocuments.us/reader033/viewer/2022041418/5e1cfc9f20936033de769b1e/html5/thumbnails/13.jpg)
www.rotor.se
Reliability Issues
Separator test no 14, Fine filter
00.5
11.5
22.5
33.5
4
2000 3000 4000 5000 6000 7000
Speed [rpm]
delta
X [g
wat
er p
er k
g dr
y ai
r]
100
105
110
115
120
125
130
Rel
ativ
e hu
mid
ity
afte
r sep
arat
or
[%]
Disch pressure: 8 bar aDisch temperature: 40 deg CWater injection: 43 lpm
Corrosion/wear Water Circulation System
LubricationProduct designs
![Page 14: WATER LUBRICATED Air-Ends WL - GCI-Consultinggci-consulting.de/pdf/2007_SRM_GCI_Presentation.pdfGCI distributes WL Air-ends and support OEM Customers re Water Screw Packaging due to](https://reader033.vdocuments.us/reader033/viewer/2022041418/5e1cfc9f20936033de769b1e/html5/thumbnails/14.jpg)
www.rotor.se
2004: New Generation WL, direct- and belt drive
WL 37 (axial air-intake) WL 38 (radial air-intake)
![Page 15: WATER LUBRICATED Air-Ends WL - GCI-Consultinggci-consulting.de/pdf/2007_SRM_GCI_Presentation.pdfGCI distributes WL Air-ends and support OEM Customers re Water Screw Packaging due to](https://reader033.vdocuments.us/reader033/viewer/2022041418/5e1cfc9f20936033de769b1e/html5/thumbnails/15.jpg)
www.rotor.se
Development history of Package Design from 1996 to the finished product 2006
2006: First Water Lubricated Screw Compressor WLC 38 by GCI Consulting GmbH, Germany
1996: SRM first Prototype for testing
2001: SRM Prototype for endurance test
![Page 16: WATER LUBRICATED Air-Ends WL - GCI-Consultinggci-consulting.de/pdf/2007_SRM_GCI_Presentation.pdfGCI distributes WL Air-ends and support OEM Customers re Water Screw Packaging due to](https://reader033.vdocuments.us/reader033/viewer/2022041418/5e1cfc9f20936033de769b1e/html5/thumbnails/16.jpg)
www.rotor.se
July 2004:Exclusive Sales Agreement of SRM WL Air-ends between SRM and GCI Consulting:
GCI distributes WL Air-ends and support OEM Customers re Water Screw Packaging due to GCI expertise in order to build their own Water Lubricated Compressor Range fast and with low cost.
April 2005, Hannover Fair :
SRM presented their Market-Ready oil-less WL 37/38 Air-ends and GCI their Package-Design know how
Marketing of SRM WL Air-ends to OEM Customers
![Page 17: WATER LUBRICATED Air-Ends WL - GCI-Consultinggci-consulting.de/pdf/2007_SRM_GCI_Presentation.pdfGCI distributes WL Air-ends and support OEM Customers re Water Screw Packaging due to](https://reader033.vdocuments.us/reader033/viewer/2022041418/5e1cfc9f20936033de769b1e/html5/thumbnails/17.jpg)
www.rotor.se
![Page 18: WATER LUBRICATED Air-Ends WL - GCI-Consultinggci-consulting.de/pdf/2007_SRM_GCI_Presentation.pdfGCI distributes WL Air-ends and support OEM Customers re Water Screw Packaging due to](https://reader033.vdocuments.us/reader033/viewer/2022041418/5e1cfc9f20936033de769b1e/html5/thumbnails/18.jpg)
www.rotor.se© Copyright GCI Consulting GmbH
![Page 19: WATER LUBRICATED Air-Ends WL - GCI-Consultinggci-consulting.de/pdf/2007_SRM_GCI_Presentation.pdfGCI distributes WL Air-ends and support OEM Customers re Water Screw Packaging due to](https://reader033.vdocuments.us/reader033/viewer/2022041418/5e1cfc9f20936033de769b1e/html5/thumbnails/19.jpg)
www.rotor.se
2006: GCI supplied several oil-less WLC 38-Packages to OEM-Manufacturers in Europe, Asia and USA.
![Page 20: WATER LUBRICATED Air-Ends WL - GCI-Consultinggci-consulting.de/pdf/2007_SRM_GCI_Presentation.pdfGCI distributes WL Air-ends and support OEM Customers re Water Screw Packaging due to](https://reader033.vdocuments.us/reader033/viewer/2022041418/5e1cfc9f20936033de769b1e/html5/thumbnails/20.jpg)
www.rotor.se