waste water and treatment of waste water in industry
TRANSCRIPT
![Page 1: Waste water and treatment of waste water in industry](https://reader030.vdocuments.us/reader030/viewer/2022020921/58ab44d71a28ab61758b532f/html5/thumbnails/1.jpg)
GANDHINAGAR INSTITUTE OF TECHNOLOGY
ACTIVE LEARNING ASSIGNMENTENVIROMENTAL ENGINEERING : (2150603)130120106022130120106024130120106039130120106045
GUIDED BY:-PROF. PRIYANKA MEHTA
![Page 2: Waste water and treatment of waste water in industry](https://reader030.vdocuments.us/reader030/viewer/2022020921/58ab44d71a28ab61758b532f/html5/thumbnails/2.jpg)
TOPIC:WASTE WATER
AND TREATMENT OF WASTE WATER
IN DAIRY INDUSTRY.
![Page 3: Waste water and treatment of waste water in industry](https://reader030.vdocuments.us/reader030/viewer/2022020921/58ab44d71a28ab61758b532f/html5/thumbnails/3.jpg)
INTRODUCTION
• Demand of milk and milk products isincreasing day by day.• Dairies collect milk from farmers andeither they bottle it or manufacture variousmilk products.• During these processes large quantity ofwastewater is generated.• Dairy waste though biodegradable butvery strong in nature.
![Page 4: Waste water and treatment of waste water in industry](https://reader030.vdocuments.us/reader030/viewer/2022020921/58ab44d71a28ab61758b532f/html5/thumbnails/4.jpg)
• DIVISION OF DAIRY INDUSTRY
The dairy industry is divided into two mainproduction areas:1. The primary production of milk on farms-thekeeping of cows (and other animals such asgoats, sheep etc.) for the production of milgoats, milkfor human consumption;2. The processing of milk with the objective ofextending its saleable life. This objective istypically achieved by:
![Page 5: Waste water and treatment of waste water in industry](https://reader030.vdocuments.us/reader030/viewer/2022020921/58ab44d71a28ab61758b532f/html5/thumbnails/5.jpg)
(a)Heat treatment to ensure that milk issafe for human consumption and has anextended keeping quality, and(b) Preparing a variety of dairy products ina semi-dehydrated or dehydrated fora form(butter, hard cheese, ghee and milkpowders), which can be stored.
![Page 6: Waste water and treatment of waste water in industry](https://reader030.vdocuments.us/reader030/viewer/2022020921/58ab44d71a28ab61758b532f/html5/thumbnails/6.jpg)
SOURCES OF WASTE
![Page 7: Waste water and treatment of waste water in industry](https://reader030.vdocuments.us/reader030/viewer/2022020921/58ab44d71a28ab61758b532f/html5/thumbnails/7.jpg)
SOURCES OF WASTESources of wastes• The liquid waste from a large dairy originatesfrom following sections :-1. Bottling plant2. Cheese plant3. Butter plant4. Condensed milk plant5. Ghee making plant6. Milk powder plant and7. Ice cream plant8. Cleaning and washing of reactors
![Page 8: Waste water and treatment of waste water in industry](https://reader030.vdocuments.us/reader030/viewer/2022020921/58ab44d71a28ab61758b532f/html5/thumbnails/8.jpg)
WASTEWATER GENERATIONThe dairy industry is one of the most polluting of industries, not only in terms of the volume of effluent generated, but also in terms of its characteristics as well.A chain of operations involving receiving and storing of raw materials, processing of raw materials into finished products, packaging and storing of finished products, and a group of other ancillary operations (e.g., heat transfer and cleaning) will produce wastewater.
![Page 9: Waste water and treatment of waste water in industry](https://reader030.vdocuments.us/reader030/viewer/2022020921/58ab44d71a28ab61758b532f/html5/thumbnails/9.jpg)
SOURCES OF WASTEWATER D A I R Y P R O C E S S
Preparation stages1) Milk
receiving/storage.
2) Pasteurization/Ultra heat treatment
S O U R C E S O F W A S T E
1) Poor drainage of tankers2) Spills and leaks from
pipes3) Foaming4) Spils from storage tanks5) Cleaning operations6) Liquid losses7) Foaming8) Recovery of downgraded
product9) Cleaning operations10)Deposits on surface of
heating equipment.
![Page 10: Waste water and treatment of waste water in industry](https://reader030.vdocuments.us/reader030/viewer/2022020921/58ab44d71a28ab61758b532f/html5/thumbnails/10.jpg)
3) Homogenisation
4) Separation/Clarification
Product Processing Stage
5) Market milk
Liquid losses/leaksCleaning operationsFoamingPipe leaks
Product washingSludge removal from clarifierDamaged milk packagesOverfillingPoor drainageCleaning of filling machineryLeaksCleaning operations
![Page 11: Waste water and treatment of waste water in industry](https://reader030.vdocuments.us/reader030/viewer/2022020921/58ab44d71a28ab61758b532f/html5/thumbnails/11.jpg)
6) Cheese Making
7) Butter Making
8) Milk powder manufacture
Overfilling vatsIncomplete separation of
whey from curdUsing salt in cheese makingProduct washingVacreation( reduced
pressure pasteurization using stream) and salt use.
Spills of powder handlingStart up and shut down
lossesPlant malfunctionStack lossesCleaning of evaporators and
driersBagging losses
![Page 12: Waste water and treatment of waste water in industry](https://reader030.vdocuments.us/reader030/viewer/2022020921/58ab44d71a28ab61758b532f/html5/thumbnails/12.jpg)
CHARACTERISTICS OF WASTE WATERDairy wastewater contains milk solids, detergents,
sanitizers, milk wastes, and cleaning water. It is characterized by high concentrations of
nutrients, and organic and inorganic contents. Salting activities during cheese production may
result in high salinity levels. Wastewater may also contain acids, alkali with a
number of active ingredients, and disinfectants, as well as a significant microbiological load, pathogenic viruses, and bacteria.
Other wastewater streams include cooling water from utilities, storm water, and sanitary sewage.
![Page 13: Waste water and treatment of waste water in industry](https://reader030.vdocuments.us/reader030/viewer/2022020921/58ab44d71a28ab61758b532f/html5/thumbnails/13.jpg)
Parameters UNITS GUIDELINE VALUE
pH - 4-12Suspended solids mg/l 24-5700BOD5 mg/l 450-4,790COD mg/l 80 - 95000Total nitrogen mg/l 15-180Total phosphorus mg/l 11-160Oil and grease mg/l 10Total coliform bacteria Mpn/100ml 400Magnesium mg/l 25-49Potassium mg/l 11-160Chloride mg/l 48-469Calcium mg/l 57-112
BIS GUIDELINES OF PARAMETERS
![Page 14: Waste water and treatment of waste water in industry](https://reader030.vdocuments.us/reader030/viewer/2022020921/58ab44d71a28ab61758b532f/html5/thumbnails/14.jpg)
TREATMENT METHODS Primary:i. Physical
Treatmentii. Chemical
Treatment
Secondary:i. Biological
Treatmentii. Chemical
Treatmentiii. Membrane
Methodiv. Electrolytic
Methodv. Miscellaneous
Modified Methods
![Page 15: Waste water and treatment of waste water in industry](https://reader030.vdocuments.us/reader030/viewer/2022020921/58ab44d71a28ab61758b532f/html5/thumbnails/15.jpg)
Primary Treatment
![Page 16: Waste water and treatment of waste water in industry](https://reader030.vdocuments.us/reader030/viewer/2022020921/58ab44d71a28ab61758b532f/html5/thumbnails/16.jpg)
Secondary Treatment
![Page 17: Waste water and treatment of waste water in industry](https://reader030.vdocuments.us/reader030/viewer/2022020921/58ab44d71a28ab61758b532f/html5/thumbnails/17.jpg)
Aerobic Process of Treatment
![Page 18: Waste water and treatment of waste water in industry](https://reader030.vdocuments.us/reader030/viewer/2022020921/58ab44d71a28ab61758b532f/html5/thumbnails/18.jpg)
ANAEROBIC PROCESS OF TREATMENT
• Conventional Anaerobic Digester• Anaerobic Contact Digester• Anaerobic Fixed Film Reactor• Up flow Anaerobic Sludge Blanket• Two Phase / Hybrid Reactor• Combined - Anaerobic & Aerobic
Process
![Page 19: Waste water and treatment of waste water in industry](https://reader030.vdocuments.us/reader030/viewer/2022020921/58ab44d71a28ab61758b532f/html5/thumbnails/19.jpg)
Chemical Treatment• It can reduce COD by 78% and BOD by
84%. Membrane Method:• It can reclaim Valuable milk solids or
chemicals for resale, reuse or less expensive method.
Electrolytic Method Miscellaneous and Modified
Method
![Page 20: Waste water and treatment of waste water in industry](https://reader030.vdocuments.us/reader030/viewer/2022020921/58ab44d71a28ab61758b532f/html5/thumbnails/20.jpg)
BIOLOGICAL TREATMENTAerobic Anaerobic
Applicability low strength: low, medium and high strength:
(BOD, mg/l) (100 - 2000 mg/l) (250 - > 100.000 mg/l)
BOD-removal: 93-99% 90%
NH3-conversion: 95% low
NO3-removal: 90%* high
![Page 21: Waste water and treatment of waste water in industry](https://reader030.vdocuments.us/reader030/viewer/2022020921/58ab44d71a28ab61758b532f/html5/thumbnails/21.jpg)
Advantage Disadvantage
Anaerobic
* possible production of energy* low need for land* power failure or shutdown will not affect the system* no energy consumption* low production of excess sludge
* optimal process temperature is about 30°C* post-treatment for BOD-removal is often required
Aerobic
* low process temperature* end treatment of waste-water
* energy need for aeration* high need for land* power failure or shutdown will affect the entire system* post-treatment for further nutrient removal is often required* high production of excess sludge
![Page 22: Waste water and treatment of waste water in industry](https://reader030.vdocuments.us/reader030/viewer/2022020921/58ab44d71a28ab61758b532f/html5/thumbnails/22.jpg)
EFFLUENT TREATMENT PLANT(ETP) Aims at Treatment & Utilisation of
Waste Products in order to avoid Environment Pollution
![Page 23: Waste water and treatment of waste water in industry](https://reader030.vdocuments.us/reader030/viewer/2022020921/58ab44d71a28ab61758b532f/html5/thumbnails/23.jpg)
PRIMARY CLARIFICATION : STRAINER
Macro particles Such as
Polyethylene,Conc. Fat/Sludge,And other WasteProducts areSeparated.
![Page 24: Waste water and treatment of waste water in industry](https://reader030.vdocuments.us/reader030/viewer/2022020921/58ab44d71a28ab61758b532f/html5/thumbnails/24.jpg)
2. AGITATION CHAMBER: Sewerage is Sewage is agitated through pump unit to break all macromolecules
sludge.through Pump Unit to break down all Macro molecules of Sludge
![Page 25: Waste water and treatment of waste water in industry](https://reader030.vdocuments.us/reader030/viewer/2022020921/58ab44d71a28ab61758b532f/html5/thumbnails/25.jpg)
In the Third section, after being passed out from the “Agitation Chamber”, The sewerage enters into
“DECOMPOSITION CHAMBER”.
Here, In the Decomposition Chamber, the waste products were allowed for Anaerobic Decomposition, resulting in the Production of Methane
Gas.
Methane gas is used for Electricity Generation, for partial compensation of the Power Consumption by the plant
![Page 26: Waste water and treatment of waste water in industry](https://reader030.vdocuments.us/reader030/viewer/2022020921/58ab44d71a28ab61758b532f/html5/thumbnails/26.jpg)
UREA, GROMMER & COW DUNG ARE ADDED WITH AGITATION FOR
AERATION OF THE SLURRY
4. AERATION CHAMBER
![Page 27: Waste water and treatment of waste water in industry](https://reader030.vdocuments.us/reader030/viewer/2022020921/58ab44d71a28ab61758b532f/html5/thumbnails/27.jpg)
5. CLARIFICATION CHAMBER
![Page 28: Waste water and treatment of waste water in industry](https://reader030.vdocuments.us/reader030/viewer/2022020921/58ab44d71a28ab61758b532f/html5/thumbnails/28.jpg)
From “Clarification Chamber”, Liquid effluents gets collected in “TREATED EFFLUENT SUMP”. This water can be used for gardening purposes.
Solid Sludg
e
TREATED EFFLUENT SUMP
![Page 29: Waste water and treatment of waste water in industry](https://reader030.vdocuments.us/reader030/viewer/2022020921/58ab44d71a28ab61758b532f/html5/thumbnails/29.jpg)
THANK
YOU