warehouse identification & planning solutions 2013 from storage design limited
DESCRIPTION
Warehouse Identification & Planning Solutions 2013 from Storage Design Limited. Bay Beam and Pallet location signs and labels.TRANSCRIPT
STORAGE DESIGN LIMITED Beaverswood Catalogue 2013
STORAGE DESIGN LIMITED TEL:01446 772614 [email protected] www.storage-design.co.uk
IDENTIFICATION SOLUTIONSfrom STORAGE DESIGN LIMITED
2013
Page no.Where you can find...
The advantages for you…
Our aim is to provide our customers with a complete range ofidentification products. If the item you are seeking is not shown in our catalogue, please call us, our wide knowledge of the industry may enable us to source or recommend a solution.
Stock catalogue items are available ‘off the shelf’ for immediate despatch.
To ensure that you obtain the correct product for your requirements, we can offer technical advice and site visits.
Quality Assurance Policy
It is Beaverswood’s aim, to supply you with a quality, cost effective, labelling solution to meet your individual requirements.
Exceeding the high standards expected by our customers, calls for a systematic and disciplined approach by all employees to the principles of Quality Assurance. To this end, the company has an established Quality Management System, based on the requirements of BS EN ISO 9001:2008.
Total Quality Total ServiceBS EN ISO 9001:2008 Certificate No. 4692
Help & Assistance
InnovativeProducts
Ex-stockDelivery
Our fully trained in house team of installers, offer a professional, quality installation service throughout the UK.
InstallationService
Please see our product demonstrations by scanning the QR codes shown on the relevant pages or go to our youTube channel http://www.youtube.com/user/beaverswoodsupply
Product Demonstration Videos
IDENTIFICATION SOLUTIONS
26 2
Aisle Markers 6-9Anti-slip Tape 41Asset Tags 43Barcode Labels 4-5 8 12 20 36Bay Markers 9Clip on Pockets 31Code Labelling 4-5Colour Coded Beam Labelling 4-5Consecutive Number Tiles 25Custom Printed Signs & Labels 46Document Display 28-29Document Pockets 30-32Double sided Tape 19Drywipe Boards 47Floor Graphic Markers 22Floor Lane Marking Tape 40Floor Location Labels 20Floor Marking Paint 38Floor Signals 21Frames4docs 28-29Hanging Markers 8Hanging Pockets 32Identification Tiles 25Information Labels 11Label Holders 14-15Lane Marking 40Location Labelling 4-5Location Markers 17Magnetic Early Learning Tiles 33Magnetic Easy Wipe Racking Strip 18Magnetic Frames 28Magnetic Label Holders 14Magnetic Location Markers 17Magnetic Numbers & Letters 24Magnetic Paper 33Magnetic Pockets 30Magnetic Self-adhesive Strip 19Magnetic Ticket Holders 13Magnetic Tiles 25Magnetic Whiteboards 47Magnetic Wrap-around Pockets 32Memo Magnets 33Message Markers 23Metal Tags 42Numbers & Letters 24-27Pallet Marker 23Pallet Topper 37Pick Bin Flexi Pockets 36Plastic Tags 42Printed Boards 47Racking Strip 18racksack 34-35Ring Tags 23Safety Signs 42-46Self-adhesive Frames 29Self-adhesive Label Holders 15Self-adhesive Numbers & Letters 26-27Self-adhesive Pockets 30,32Self-adhesive Steel Tape 19Self-adhesive Ticket Holders 12Steel Tape 19Stencils 39Styrene Hanging Pockets 36SWL Labels 11Tags 42Ticket Holders 12-13Ticket Pouches 17Tie-on Pockets 31Tote Bin Labels 36Tri Markers 8Weight Load Notices 10-11Weight Load Templates 48-50Wet Wipe Marker Pens 18Waste Management Sacks 34-35Wire Shelving Clip Holder 16
STORAGE DESIGN LIMITED Beaverswood Catalogue 2013
STORAGE DESIGN LIMITED TEL:01446 772614 [email protected] www.storage-design.co.uk
Contents
Description Page no.
4Location Labelling
6Aisle Identification
10Racking Safety
12Rack Identification
20Floor Identification
19Fixings
24Numbers & Letters
30Document Pockets
34Warehouse Recycling
28Document Display
36Bin & Trolley Identification
33Magnetic Accessories
37Pallet Protection
38Floor Marking
41Anti-slip Flooring
43Signage & Labelling
42Industrial Tags
Load Notice Templates
47Information Boards
48
3
STORAGE DESIGN LIMITED Beaverswood Catalogue 2013
STORAGE DESIGN LIMITED TEL:01446 772614 [email protected] www.storage-design.co.uk
4
Installation Service available
Low volume print runs available
Clear identification
A-02-D 2RackColour Level PositionBay
Our own in-house installation teams are supervised by a Project Manager who is onsite for the duration of the installation. The Project Manager will liaise with the client throughout to ensure that aprofessional, quality service is provided.
Design, manufacture & installation of code labels
Quantity of labels/Number of locations
Typical code
Colour requirement
Appromixate label sizeHeight to top beam - For install purposes
We offer an on site consultation service provided by our Project Managers, who will design a labelling solution to meet your particular system requirements.
To book your consultation please call our sales office. If you already know your requirements – then contact us for a quotation with the following data;
The management of a modern warehouse needs clear and precise identification that can be quickly and easily understood by all concerned.As specialists in the design, manufacture andinstallation of code labels we provide a cost effective solution to all your labelling needs.
Custom printed to your design
Can include bar codes & colour coding
On-site consultations
Installed by our in-house team
Warehouse Labelling
See page 9 for Bay Markers
Location Labelling
STORAGE DESIGN LIMITED Beaverswood Catalogue 2013
STORAGE DESIGN LIMITED TEL:01446 772614 [email protected] www.storage-design.co.uk
Materials & Colour Coding
5
To maximise your traffic flow & minimise costly picking errors call our sales office to book your on-site consultation
A wide variety of base materials are available for the manufacture of hard wearing code labels including:
Colour coding offers an additional high visibility quick check facility
Coloured Vinyls
Polypropylene
Deep Freeze
Magnetic
PVC
Styrene
See page 20 for Floor Location Labels
Location Labelling
Watch the video
STORAGE DESIGN LIMITED Beaverswood Catalogue 2013
STORAGE DESIGN LIMITED TEL:01446 772614 [email protected] www.storage-design.co.uk
Custom made markers can also be manufactured to show company logos,
6
Angled Aisle Markers
See page 27 for Self-adhesive Numbers & Letters
Aisle Identification
Please specify sequencing & colour option when ordering
Angled aisle markers for good visibility
Our range of highly visible angled aisle markers are available with either magnetic or self-adhesive fixings and come in a choice of white or yellow.
Included in the price, the AM1F is supplied with one self-adhesive printed label for the user to apply, the label can be applied to the front or back depending if the marker is to be used right or left handed.
The AM1T is supplied with two printed labels.
Choice of fixing -Magnetic or Self-adhesive
Price includes printing of characters
Ref Size (mm h x w) Characters Fixing Colour Price £AM1F 95 x 130 Up to 3 Self- White/ characters Adhesive Yellow 6.96AM1FM 95 x 130 Up to 3 Magnetic White/ characters Yellow 7.35AM1T 95 x 130 x 130 Up to 3 Self- White/ characters Adhesive Yellow on each side 10.95AM1TM 95 x 130 x 130 Up to 3 Magnetic White/ characters Yellow on each side 12.60
High visibility marker for shelving
This aisle marker is the ideal, highly visible and economical solution for shelving aisle and bay identification. The marker is supplied pre-drilled in 4 corners for cable tie or screw fixing. Alternatively our Magnetic Self-adhesive Strip can be applied to the rear of the marker for quick and easy fixing – see page 19.
Price includes printing of up to 3 characters
Ref Size (mm h x w) Characters Colour Price £AM1 95 x 160 Up to 3 characters White/Yellow 6.45
Shelving Aisle Marker
AM1T / AM1TM (Angled)
AM1F / AM1FM (Flag)
STORAGE DESIGN LIMITED Beaverswood Catalogue 2013
STORAGE DESIGN LIMITED TEL:01446 772614 [email protected] www.storage-design.co.uk
various colours, and different sizes. Please contact our sales offices for further details.
Aisle & Bay I.D. Markers
7See page 34 for Racksack
Aisle Identification
Markers to identify aisles or bays
Our range of robust end of aisle identificationmarkers are available in various sizes and designs for instant product and aisle locating. Suitable for use in factory, warehouse or office environments.
Bespoke markers can be manufactured incorporating directional arrows, logos, and entry/no entry symbols etc. Contact our sales officefor further details.
Supplied pre-drilled unless stated
Improves identification
Prices include printing of required characters up to the maximum allowed
Ref Size (mm h x w) Characters Colour Price £AM2/1 220 x 270 With 1 x 180mm Yellow/White 9.18AM2/2 220 x 270 With 2 x 180mm Yellow/White 12.60AM3/1 220 x 450 With 1 x 180mm Yellow/White 9.81AM3/2 220 x 450 With 2 x 180mm Yellow/White 13.80AM3/3 220 x 450 With 3 x 180mm Yellow/White 17.25AM3X/1 300 x 300 With 1 x 180mm Yellow/White 9.81AM3X/2 300 x 300 With 2 x 180mm Yellow/White 13.80AM4 660 x 343 With 1 x 500mm Yellow 18.45AM6/1 600 x 600 With 1 x 450mm Yellow/White 45.30AM6/2 600 x 600 With 2 x 450mm Yellow/White 70.80
AM2/2
AM3/3
AM6AM4
SJ SK
Watch the video:
STORAGE DESIGN LIMITED Beaverswood Catalogue 2013
STORAGE DESIGN LIMITED TEL:01446 772614 [email protected] www.storage-design.co.uk
Identify block stack areas & aisles, etc.
Designed to identify areas from above, rather than marking the floor or using freestanding signs, these large V angled marker signs give clear identification for codes and barcodes. Manufactured in rigid 3mm styrene with black print on a white sign.
2 standard sizes are available with a face area of 686mm(h) x 660mm(w) or 343mm(h) x 660mm(w). Special sizes are also available.
Each sign has chain locating holes and chains are available as an optional extra. To obtain prices and further details please call the sales office.
Highly visible
Standard sizes & specials available
Ref Size (mm h x w) Price £VM66 686 x 660 POAVM63 343 x 660 POA
3 Way Marker
Chain with hooks
High visibility for aisle & block stacking areas
3 way hanging markers allows clear all roundidentification for aisles and block stacking areas within the workplace. Price includes the printing of either 1 or 2 digits per side. Please specify digits required when ordering, can be alpha or numerical digits.
The 2mm zinc plated chain is sold in 1m lengths complete with ‘con hook’ (open large bow) at each end. Numerous lengths can be attached to each other to form the length required.
Available with 1 or 2 digits per side
Tri-Markers
Each panel/side is 220mm(h) x 270mm(w)
Printed to your design
Ref Dimensions Price £CH1/2 1m long x 2 lengths 8.40CH1/3 1m long x 3 lengths 12.00CH1/10 1m long x 10 lengths 37.80CH1/50 1m long x 50 lengths 184.50CH1/100 1m long x 100 lengths 366.30
Ref No. of digits per side Price £53.13 1 1/2HMA00.24 2 2/2HMA
Ordering information: If you require a hanging length of 2m you would require 2 x ref CH1/3.You would be supplied with 6 x 1m pieces to create 3 x 2m lengths.
Panels are available in black on yellow or black on white. Please specify when ordering.
8
Hanging V Markers
See page 37 for Pallet Topper
Aisle Identification
STORAGE DESIGN LIMITED Beaverswood Catalogue 2013
STORAGE DESIGN LIMITED TEL:01446 772614 [email protected] www.storage-design.co.uk
Clear Identification
Our high visibility Bay Markers offer clearidentification throughout the warehouse. A formed aluminium section with either a magnetic or self-adhesive edge, enables the marker to be easily mounted onto steel racking without drilling. When locations need to be changed the magnetic marker can simply be lifted and relocated.
High visibility black on yellow vinyl character for above.
The characters can be applied to the front and back of the marker allowing the location to be viewed from both sides.
Fixed or relocated in seconds
No drilling required
Please select type and size of marker and add on required character - Specify letter or number and quantity required
Please note: You may wish to apply characters to each side of the marker.
Ref Fixing Size (mm h x w) Accommodates Price £BM1 Magnetic 260 x 167 1 character 16.20BM2 Magnetic 260 x 310 2 character 23.10BA1 Self-adhesive 260 x 167 1 character 16.20BA2 Self-adhesive 260 x 310 2 character 23.10
High Visibility Characters
Magnetic Self-adhesive
BM2 / BA2
Magnetic & Self-adhesive Bay Markers
9See page 23 for Pallet Markers
Aisle Identification
A-Z & 0-9 characters available, please confirm which characters and quantities required when ordering.
Ref Size (mm h x w) Digit Height (mm) Price £F8 230 x 140 160 2.40
BA2 - 2 character Bay Marker
BA1 - Front view BA2 - Rear view with character applied
STORAGE DESIGN LIMITED Beaverswood Catalogue 2013
STORAGE DESIGN LIMITED TEL:01446 772614 [email protected] www.storage-design.co.uk
Signs to identify weight loadings & procedures
Five tough and durable PVC weight load notices, detailing the procedures for the maintenance of racking structures. The range covers shelf/pallet racking, cantilever racking, drive-thru racking and mezzanine floors.
Our BLS5 is in line with the latest Health & Safety recommendations. The sign can be overprinted with your corporate logo, address and contact details.
Choice of 5 different designs
Supplied blank from stock
Price also includes black printing withcontact details & loadings
Ref Suitable for Size (mm h x w) Price £BLS1 Pallet Racking 356 x 254 12.30BLS2 Cantilever Racking 356 x 254 12.30BLS3 Drive Thru’ Racking 356 x 254 12.30BLS4 Mezzanine Floor 356 x 254 12.30BLS5 Pallet Racking 470 x 350 14.55
All of our weight load notices can be colour printed with your logo, etc. (Subject to minimum quantity). Please call for further details.
For easy ordering, templates for our BLS1 and BLS5 can be found on pages 48 and 49. Simply enter your details and forward them together with your purchase order.
Alternatively we can email these and other templates to you. Please call with your details.
BLS5
BLS1
BLS1 BLS2
BLS3 BLS4
10 See page 48 for Weight Load Templates
Racking Safety
Weight Loading Identification
STORAGE DESIGN LIMITED Beaverswood Catalogue 2013
STORAGE DESIGN LIMITED TEL:01446 772614 [email protected] www.storage-design.co.uk
Our highly visible labels were originally designed to highlight Max UDL or SWL on shelving and pallet racking beams, but these labels can be used virtually anywhere and on most surfaces.
Simply select the size you require, confirm the text, pictograms, colour and quantity required. Four stand-ard sizes are offered however other sizes are available.
Price includes printing to your design
Choice of 4 standard sizes
Black text on white or yellow background
Highly visible information labels
Please note there is a minimum order value of £25
* Print may appear on two lines
Ref Size (mm h x w) Colours Price £BL23 25 x 200 White/Yellow 0.90BL53 50 x 300 White/Yellow 1.44BL73* 70 x 300 White/Yellow 2.10BL93* 90 x 300 White/Yellow 2.52 GOODS IN BAY
YOUR COMPANY NAME HERE
1200 KgUNIFORMLY DISTRIBUTED
LOAD PER LEVEL
KEEP ALL LIMBSINSIDE CAB
Magnetic & Self-adhesive Information Labels
11See page 4 for Warehouse Labelling
Racking Safety
Self-adhesive
Ref Size (mm h x w) Colours Price £BL23M 25 x 200 White/Yellow 1.47BL53M 50 x 300 White/Yellow 2.79BL73M* 70 x 300 White/Yellow 3.72BL93M* 90 x 300 White/Yellow 4.65
Magnetic
Horizontal format load notices
These racking and shelving landscape style weight load notices are built to last using 1.5mm thick white rigid styrene. These hi-impact notices allow for all the relevant information pertaining to the safe load limits and can be supplied blank or printed with black text at no extra charge. (Colour print is also available subject to quantity).
Both of these notices are in line with the latest Health and Safety recommendations.
Templates can be e-mailed so that you can enter your details and return to us with your purchase order.
Choice of 2 standard designs
Supplied blank or printed with black text at no extra charge
Ref Suitable for Size (mm h x w) Price £BLS6 Pallet Racking 297 x 420 15.00BLS7 Shelving 215 x 220 9.90
BLS6
BLS7
Weight Notices - Horizontal
STORAGE DESIGN LIMITED Beaverswood Catalogue 2013
STORAGE DESIGN LIMITED TEL:01446 772614 [email protected] www.storage-design.co.uk
Self-adhesive Ticket Holders
For non standard heights, widths or coloured profiles please contact our sales office for a personalised quotation.
Ref Size Pack White Cards Price £ Included TS210 25mm x 100mm 100 39.60TS220 25mm x 200mm 50 37.80TS25/10 25mm x 1M 10 30.90TS25/20 25mm x 2M 10 45.90TS25/60 25mm x 2M 30 114.00TS25/100 25mm x 2M 50 165.00TS25/250 25mm x 2M 125 348.90TS310 38mm x 100mm 100 42.90TS320 38mm x 200mm 50 40.50TS38/10 38mm x 1M 10 35.70TS38/20 38mm x 2M 10 53.70TS38/60 38mm x 2M 30 141.00TS38/100 38mm x 2M 50 205.20TS38/250 38mm x 2M 125 444.00
Printed Inserts
Pull-forward front allows easy loading & updates of information
Pre-cut sizes from stock
Barcodes can be scanned without removing the insert
Ideal for permanent locations on shelving & racking
Special sizes on request (up to 3m lengths)
With a choice of 4 heights this clear PVC strip is supplied with an aggressive adhesive backing for permanent locations.
Why waste time printing your own labels or runthe risk of picking errors caused by unclearidentification? We have the ability to print inserts which will give clear and highly visible identification. The inserts can include alpha, numeric, directional arrows and barcodes, etc.
Please call our sales office for prices and further information.
Self-adhesiveTicket Holder ProfilesHeight in mmActual size:
25 38 54 80
D003D004
D005
Self-adhesive Ticket Holders Cont.
Ref Size Pack White Cards Price £ Included TS510 54mm x 100mm 100 59.40TS520 54mm x 200mm 50 53.70TS54/10 54mm x 1M 10 51.30TS54/20 54mm x 2M 10 87.30TS54/60 54mm x 2M 30 223.50TS54/100 54mm x 2M 50 333.00TS54/250 54mm x 2M 125 717.00TS810 80mm x 100mm 100 64.50TS820 80mm x 200mm 50 60.00TS80/10 80mm x 1M 10 56.10TS80/20 80mm x 2M 10 103.50TS80/60 80mm x 2M 30 261.60TS80/100 80mm x 2M 50 390.00TS80/250 80mm x 2M 125 831.00
Supplied in Lengths of up to 3 meters
12
Self-adhesive Ticket Holders
See page 29 Self-adhesive Frames4docs
Rack Identification
Watch the video
STORAGE DESIGN LIMITED Beaverswood Catalogue 2013
STORAGE DESIGN LIMITED TEL:01446 772614 [email protected] www.storage-design.co.uk
Pull-forward front allows easy loading & updates of information
Pre-cut sizes from stock
Barcodes can be scanned without removing the insert
Ideal for identifying locations on shelving & pallet racking
Special sizes on request (up to 3m lengths)
For non standard heights, widths or coloured profiles please contact our sales office for a personalised quotation.
Magnetic Ticket Holders
Ref Size Pack White Cards Price £ Included TS210M 25mm x 100mm 100 69.60TS220M 25mm x 200mm 50 55.20TS25M/10 25mm x 1M 10 48.30TS25M/20 25mm x 2M 10 75.60TS310M 38mm x 100mm 100 73.50TS320M 38mm x 200mm 50 59.10TS38M/10 38mm x 1M 10 54.30TS38M/20 38mm x 2M 10 87.60TS510M 54mm x 100mm 100 87.30TS520M 54mm x 200mm 50 78.60TS54M/10 54mm x 1M 10 76.50TS54M/20 54mm x 2M 10 129.00TS810M 80mm x 100mm 100 94.20TS820M 80mm x 200mm 50 85.80TS80M/10 80mm x 1M 10 80.40TS80M/20 80mm x 2M 10 138.60
Aditional White Card InsertsRef Size Pack Price £
TC210 25mm x 100mm 100 3.96TC220 25mm x 200mm 50 3.96TC250 25mm x 1M 10 4.65TC310 38mm x 100mm 100 4.29TC320 38mm x 200mm 50 4.29TC350 38mm x 1M 10 4.95TC510 54mm x 100mm 100 4.65TC520 54mm x 200mm 50 4.65TC550 54mm x 1M 10 5.28TC810 80mm x 100mm 100 4.92TC820 80mm x 200mm 50 4.92TC850 80mm x 1M 10 5.61
Magnetic Ticket Holder ProfilesHeight in mmActual size:
In a choice of 4 heights this clear PVC strip is supplied as a magnetic option which offers the flexibility to change locations and is ideal for cold storage applications.
25 38 54 80
Magnetic Ticket Holders
13See page 18 for Magnetic Racking Strip
Rack Identification
Supplied in Lengths of up to 3 meters
Watch the video
STORAGE DESIGN LIMITED Beaverswood Catalogue 2013
STORAGE DESIGN LIMITED TEL:01446 772614 [email protected] www.storage-design.co.uk
14
Magnetic Label Holders
See page 24 for Magnetic Numbers & Letters
Rack Identification
Standard sizes supplied from stock
Instant & highly visible identification
Card & PVC Inserts - For magnetic & self-adhesive Label Holders
Additional card and PVC inserts are available for the label holders.
Please specify whether it is to be used with the self-adhesive or magnetic holders.
Our magnetic and self-adhesive label holders are supplied from stock in pre-cut lengths but special sizes can be supplied on request. Each holder is supplied with white card inserts and a cover strip. Pre-printed inserts can also be supplied for each of the holders incorporating barcodes and location codes. Please contact our sales office for further details.
Magnetic are ideal for applications where regular changes are required, easier and quicker to move then adhesive backed holders. They are also suitable for use in cold stores.
Easy to update & move
For non standard widths please contact our sales office for a personalised quotation.
Magnetic Label Holder ProfilesHeight in mmActual size:
15
10
8020
50
60
70
40
30
25
Magnetic Label Holders Magnetic Label Holder RollsRef Size (h x w) Qty/Pack Price £ML18X 10 x 80mm 100 20.70ML18 15 x 80mm 100 31.35ML28X 20 x 80mm 100 35.70ML28 25 x 80mm 100 38.70ML38 30 x 80mm 100 42.90ML48 40 x 80mm 100 56.70ML58 50 x 80mm 100 69.90ML610 60 x 100mm 100 80.70ML620 60 x 200mm 50 79.20ML710 70 x 100mm 100 97.50ML720 70 x 200mm 50 95.70ML820 80 x 200mm 50 109.50ML150X 10 x 500mm 20 27.00ML150 15 x 500mm 20 40.50ML250X 20 x 500mm 20 45.00ML250 25 x 500mm 20 48.30ML350 30 x 500mm 20 52.80ML450 40 x 500mm 20 66.30ML550 50 x 500mm 20 85.50ML650 60 x 500mm 20 93.90ML750 70 x 500mm 20 114.00ML850 80 x 500mm 20 130.50ML1X/10 10mm x 1m 10 27.00ML1/10 15mm x 1m 10 40.50ML2X/10 20mm x 1m 10 45.00ML2/10 25mm x 1m 10 48.30ML3/10 30mm x 1m 10 52.80ML4/10 40mm x 1m 10 69.30ML5/10 50mm x 1m 10 85.50ML6/10 60mm x 1m 10 93.90ML7/10 70mm x 1m 10 114.00ML8/10 80mm x 1m 10 130.50
Ref Size (h x w) Qty/Pack Price £MLR1X/5 10mm x 5m 1 13.50MLR1/5 15mm x 5m 1 20.25MLR2X/5 20mm x 5m 1 22.80MLR2/5 25mm x 5m 1 24.00MLR3/5 30mm x 5m 1 26.70MLR4/5 40mm x 5m 1 34.80MLR5/5 50mm x 5m 1 42.90MLR6/5 60mm x 5m 1 47.10MLR7/5 70mm x 5m 1 57.00MLR8/5 80mm x 5m 1 65.40MLR1X/10 10mm x 10m 1 27.00MLR1/10 15mm x 10m 1 40.50MLR2X/10 20mm x 10m 1 45.00MLR2/10 25mm x 10m 1 48.30MLR3/10 30mm x 10m 1 52.80MLR4/10 40mm x 10m 1 69.30MLR5/10 50mm x 10m 1 85.50MLR6/10 60mm x 10m 1 93.90MLR7/10 70mm x 10m 1 114.00MLR8/10 80mm x 10m 1 130.50MLR1X 10mm x 50m 1 90.90MLR1 15mm x 50m 1 136.50MLR2X 20mm x 50m 1 148.20MLR2 25mm x 50m 1 156.00MLR3 30mm x 50m 1 165.00MLR4 40mm x 50m 1 198.90MLR5 50mm x 50m 1 231.00MLR6 60mm x 50m 1 261.90MLR7 70mm x 50m 1 318.00MLR8 80mm x 50m 1 413.40
Card InsertsRef Description Size (mm h x w) Qty/Pack Price £LC820 Card Insert 80 x 200 50 7.20LC150X Card Insert 10 x 500 20 4.20LC150 Card Insert 15 x 500 20 4.29LC250X Card Insert 20 x 500 20 4.59LC250 Card Insert 25 x 500 20 4.59LC350 Card Insert 30 x 500 20 4.59LC450 Card Insert 40 x 500 20 4.80LC550 Card Insert 50 x 500 20 5.37LC650 Card Insert 60 x 500 20 5.52LC750 Card Insert 70 x 500 20 6.12LC850 Card Insert 80 x 500 20 7.20
Ref Description Size (mm h x w) Qty/Pack Price £LC18X Card Insert 10 x 80 100 3.90LC18 Card Insert 15 x 80 100 4.29LC28X Card Insert 20 x 80 100 4.44LC28 Card Insert 25 x 80 100 4.44LC38 Card Insert 30 x 80 100 4.59LC48 Card Insert 40 x 80 100 4.65LC58 Card Insert 50 x 80 100 4.92LC610 Card Insert 60 x 100 100 5.52LC620 Card Insert 60 x 200 50 5.52LC710 Card Insert 70 x 100 100 6.12LC720 Card Insert 70 x 200 50 6.12
Easy to update & cut to size
New sizes added
Available in rolls of up to 50 metres
STORAGE DESIGN LIMITED Beaverswood Catalogue 2013
STORAGE DESIGN LIMITED TEL:01446 772614 [email protected] www.storage-design.co.uk
Self-adhesive Label Holders
15See page 6 for Aisle Markers
Rack Identification
Label Holders & Inserts are available from stock for immediate dispatch
Standard sizes supplied from stock
Instant & highly visible identification Self-adhesive offers a long term option of fixing label holders and more stability in environments where the labels need to be changed frequently.
The smaller holders are an ideal solution for the identification of pigeon holes, whilst the larger holders also suit environments such as offices, libraries and schools.
Ideal for more permanent environments
Available in lengths of up to 3 metres
AL58
AL38
AL18
Long term for stable environments
PVC Inserts
Self-adhesive Label Holders
Ref Description Size (mm h x w) Qty/Pack Price £LP18X PVC Insert 10 x 80 100 4.20LP18 PVC Insert 15 x 80 100 4.29LP28X PVC Insert 20 x 80 100 4.47LP28 PVC Insert 25 x 80 100 4.47LP38 PVC Insert 30 x 80 100 4.59LP48 PVC Insert 40 x 80 100 4.80LP58 PVC Insert 50 x 80 100 4.92LP610 PVC Insert 60 x 100 100 8.25LP620 PVC Insert 60 x 200 50 8.25LP710 PVC Insert 70 x 100 100 8.88LP720 PVC Insert 70 x 200 50 8.88
Ref Description Size (mm h x w) Qty/Pack Price £LP820 PVC Insert 80 x 200 50 10.50LP150X PVC Insert 10 x 500 20 4.80LP150 PVC Insert 15 x 500 20 5.28LP250X PVC Insert 20 x 500 20 5.58LP250 PVC Insert 25 x 500 20 5.58LP350 PVC Insert 30 x 500 20 6.27LP450 PVC Insert 40 x 500 20 6.90LP550 PVC Insert 50 x 500 20 7.59LP650 PVC Insert 60 x 500 20 8.25LP750 PVC Insert 70 x 500 20 9.18LP850 PVC Insert 80 x 500 20 10.50
Self-adhesive Label Holder ProfilesHeight in mmActual size:
15
50
30
Ref Size (h x w) Qty/Pack Price £AL18 15 x 80mm 100 38.40AL38 30 x 80mm 100 52.20AL58 50 x 80mm 100 64.50AL1/10 15mm x 1m 10 30.00AL3/10 30mm x 1m 10 40.80AL5/10 50mm x 1m 10 47.70
For non standard widths please contact our sales office for a personalised quotation.
STORAGE DESIGN LIMITED Beaverswood Catalogue 2013
STORAGE DESIGN LIMITED TEL:01446 772614 [email protected] www.storage-design.co.uk
16
Wire Shelving Clip Holder
See page 23 for Ringtags
Rack Identification
Each holder is 43mm high x 75mm wide overall, supplied in packs of 12 or 50 with white card inserts.
Suits wire shelves with maximum height of 35mm.
Easily identify locations on wire shelving
Pull forward front for loading & updating
Scan barcodes without removing them
Identifying locations on wire mesh shelving is
difficult as traditional magnetic or self-adhesive
holders do not suit wire mesh shelving. This holder
solves the problem by using a quick and easy to use
“clip-on” system. This versatile holder can be used in
three different formats straight for shelves that are
eye level, approx 33° for lower shelves and approx
45° for the very bottom shelf enabling easy reading.
Ref Pack Price £WSC47/12 12 24.00WSC47/50 50 89.10
Multi-position, flat or choice of 2 angled settings
Position 1 : Straight on
Position 2 Easy to clip on
Supplied with white card
Position 3
STORAGE DESIGN LIMITED Beaverswood Catalogue 2013
STORAGE DESIGN LIMITED TEL:01446 772614 [email protected] www.storage-design.co.uk
Magnetic & Self-adhesive Ticket Pouches
Magnetic Easy Wipe Location Markers
17See page 30 for Magnetic Document Pockets
Rack Identification
Write on – Wipe off
Quick and easy relocation
Locates on steel surfaces
Ref Size (mm h x w) Pack Price £
LM18 10 x 80 100 9.18LM158 15 x 80 100 14.25LM28 20 x 80 100 20.85LM258 25 x 80 100 23.70LM38 30 x 80 100 27.00LM48 40 x 80 100 31.35LM58 50 x 80 100 39.90LM310 30 x 100 100 29.10LM410 40 x 100 100 39.30LM510 50 x 100 100 45.00LM610 60 x 100 100 58.80LM710 70 x 100 100 63.30LM810 80 x 100 100 67.80LM105 56 x 105 100 54.60LM515 50 x 150 100 60.00LM815 80 x 150 100 90.90LM1015 100 x 150 100 105.00LM520 50 x 200 100 80.70LM820 80 x 200 100 117.00LM1020 100 x 200 100 145.20LM219 90 x 210 10 16.20
White magnetic location markers supplied in single sized markers. Use a wet-wipe marker pen, write on, update and move when required. These pre-cut markers offer a quick and easy high visibility system of identifying locations, products or stock quantity’s etc.
Clear front enables barcodes to be scanned
Supplied complete with white card inserts
Cost effective ticket pouches
An economical range of flexible p.v.c. ticket pouches, which have a clear p.v.c. front and yellow back designed for use on racking and shelving. The pouch opens at the top and the side for easy access to the insert. The clear front also enables barcodes to be scanned without removing the ticket. The self-adhesive pouch enables it to be permanently fixed, whereas the magnetic versions can be easily relocated without removing the ticket.
Special sizes available
Not to scale
New size addedRef Description Size (mm h x w) Pack Price £
SAP310 Self-adhesive 30 x 100 100 54.60SAP412 Self-adhesive 40 x 120 100 57.60SAP610 Self-adhesive 60 x 100 100 60.30SAP614 Self-adhesive 60 x 140 100 67.50MP310 Magnetic 30 x 100 100 60.60MP412 Magnetic 40 x 120 100 72.30MP610 Magnetic 60 x 100 100 84.00MP614 Magnetic 60 x 140 100 96.30
Watch the video
Watch the video
STORAGE DESIGN LIMITED Beaverswood Catalogue 2013
STORAGE DESIGN LIMITED TEL:01446 772614 [email protected] www.storage-design.co.uk
18
Magnetic Easy Wipe Racking Strip
See page 6 for Shelving Aisle Marker
Rack Identification
Easily cut to size
Cost effective
Write On – Wipe Off The magnetic easy wipe racking strip provides a fast and cost effective updating system for identifying product codes and stock level information, etc.
Easily cut to size
Black matt finish
This multi-purpose black magnetic strip can be used to help colour coding identification, gridding tape and also offer the possibility of stamping out any desired characters or shapes.
Our black Marker Pen is unlike most marker pens due to its unique Wet Wipe quality. Most pens of this type are either permanent or wipe off, whereas the Beaverswood pen’s ink, once dried, needs a damp cloth for it to be removed. Using permanent ink removes the benefit of having a reusable label and using a pen with removable ink means that the text can be removed by accident by someone touching the label as they pass.
Ref Size Pack Price £
MSR1 10mm x 10M 1 12.60MSR15 15mm x 10M 1 17.85MSR2 20mm x 10M 1 21.45MSR25 25mm x 10M 1 25.80MSR3 30mm x 10M 1 29.10MSR4 40mm x 10M 1 37.20MSR5 50mm x 10M 1 44.70MSR6 60mm x 10M 1 45.00MSR7 70mm x 10M 1 52.20MSR8 80mm x 10M 1 56.10MSR9 90mm x 10M 1 60.30MSR10 100mm x 10M 1 65.40
Ref Size Pack Price £
MSR1BK 10mm x 10M 1 12.60MSR15BK 15mm x 10M 1 17.85MSR2BK 20mm x 10M 1 21.45MSR25BK 25mm x 10M 1 25.80MSR3BK 30mm x 10M 1 29.10MSR4BK 40mm x 10M 1 37.20MSR5BK 50mm x 10M 1 44.70MSR6BK 60mm x 10M 1 45.00MSR7BK 70mm x 10M 1 52.20MSR8BK 80mm x 10M 1 56.10MSR9BK 90mm x 10M 1 60.30MSR10BK 100mm x 10M 1 65.40
Ref Description Price £
PB/5 Pack of 5 - black 9.81PB/10 Pack of 10 - black 18.75
Available in Blue (B), Green (G), Red (R), White (W) & Yellow (Y) - Please add colour ref to code when ordering Supplied in packs of
5 or 10
Available in 12 widths - Cut to required length
30mm
50mm 70mm 90mm
20mm
Black Magnetic Strip
Wet Wipe Marker Pens
Watch the video
STORAGE DESIGN LIMITED Beaverswood Catalogue 2013
STORAGE DESIGN LIMITED TEL:01446 772614 [email protected] www.storage-design.co.uk
Magnetic Self-adhesive Strip
19See page 11 for Weight Load Notices
Fixings
Multi-purpose fixing tape
Choice of 2 sizes
Ref Size (h x w) Price £
DST12 12mm x 50m 15.00DST19 19mm x 50m 21.90
Available from stock
Supplied in either 12mm or 19mm wide in 50 metre rolls. This very aggressive tape is ideal for fixing signs and markers within the workplace.
Available in 2 widths
Double-sided Adhesive Tape
Makes anything magnetic
Locates on any steel surface
No drilling required
Industrial quality - 1.5mm thickness
Ref Size (h x w) Adhesive Price £
MSSA/13 13mm x 30m Premium 64.80MSSA/20 20mm x 10m Foam 34.50MSSA/50 50mm x 10m Foam 53.70
Our Magnetic strip is supplied in three widths, each backed with a strong permanent self-adhesive for mounting items onto steel surfaces. This magnetic strip is ideal for many jobs in the factory orwarehouse, eliminating the need for drilling or other methods of fixing.
Available in 3 widths
Easy to cut to size
Available in 3 sizes
Used for circumstances where metal surfaces are not present
Self-adhesive Steel Tape
Ref Size (h x w) Price £
ST/12 12mm x 30m 44.10ST/20 20mm x 30m 64.20ST/25 25mm x 30m 82.50
Our self-adhesive steel tape allows non-metallic surfaces to accept magnetic products.
Typical usage would be to attach steel tape to the surface, the strip is now ready to accept magnetic items such as our Magnetic Self-adhesive Strip and Memo Magnets etc. This can then be removed/replaced as many times as required just from one fixing.
Allows non-metallic surfaces to accept magnetic products
STORAGE DESIGN LIMITED Beaverswood Catalogue 2013
STORAGE DESIGN LIMITED TEL:01446 772614 [email protected] www.storage-design.co.uk
Floor Identification Markers
Designed totally to your specification
Tough & durable
High visibility location labels
Our high visibility floor location labels are suitable to identify areas of the warehouse or factory floor. The labels can be totally customised for identification of pallet positions, item numbers and any specific area such as packing and quarantine areas, etc.
Printed to your design, the labels have anaggressive self-adhesive backing to withstandthe everyday traffic in the workplace.
To obtain a price please simply provide the following information:
SizeColour Text
Barcodes or graphics details
Quantity
Other design suggestions
Typical designs
20
Floor Location Labels
See page 8 for Tri Markers
Floor Identification
Designed to identify aisle, bay or other warehouse floor areas
Each marker is 190mm diameter
Hi-visibility floor markers
Available in A-Z & 0-25
These high visibility floor markers have been
designed to cope with the daily stress’s and strains
of a modern warehouse. All our markers incorpo-
rate a permanent aggressive adhesive backing and
can be used not just on the floor but any dry, clean
flat sealed surface. The 190mm diameter markers
are printed with a bold black digit on a yellow
background in letters A-Z or numbers 0-25.
Ref Size (diameter) Background Colour Price £
FMC/- (state digit) 190mm Yellow 4.77
STORAGE DESIGN LIMITED Beaverswood Catalogue 2013
STORAGE DESIGN LIMITED TEL:01446 772614 [email protected] www.storage-design.co.uk
Floor Signalling
21See page 41 for Anti-slip Tape
Floor Identification
Tough PVC with an aggressive adhesive
Capable of withstanding everyday traffic of a fully operational warehouse
A simple but effective solution for marking areas on the warehouse floor
Available in 6 colours
To further aid demarcation our floor signs are available in black, white, yellow, red, green and blue.
Please specify colour required when ordering.
Dimensions in mm
For walkways, pallet storage & general floor markingA range of inexpensive high visibility signals to highlight walkways, traffic flow, pallet positions and general marking on the warehouse floor.
The markers are suitable for application onto a clean, flat, sealed surface.
For centre pallet positions
For between pallets
For walkways
To indicate direction of traffic flow or position
To indicate walkways or traffic flowSupplied in packs of 10 - 5 left, 5 right
Corner for marking out block stack pallet areas
90 90
90
FS/O FS/A300
300
200
300
100
200
FS/+ FS/T FS/L
200
FS/F
300
Ref Shape Size (mm h x w) Pack Colour Price £
FS/+ 300 x 300 10 Black, White, Yellow 19.80 Red,Green, Blue
FS/T 200 x 300 10 Black, White, Yellow 13.50 Red,Green, Blue
FS/L 200 x 200 10 Black, White, Yellow 13.50 Red,Green, Blue
FS/O 90mm 100 Black, White, Yellow 31.35 Diameter Red,Green, Blue
FS/A 90 x 90 100 Black, White, Yellow 31.35
Red,Green, Blue
FS/F 300 x 100 10 Black, White, Yellow 13.50 Red,Green, Blue 5 left / 5 right
Watch the video
STORAGE DESIGN LIMITED Beaverswood Catalogue 2013
STORAGE DESIGN LIMITED TEL:01446 772614 [email protected] www.storage-design.co.uk
22
Floor Graphic Markers
See page 43 for Asset Tags
Floor Identification
Designed to highlight warnings orspecial requirements
Each sign is 430mm diameter
Hi-visibility graphic floor signs
Ref Size (diameter) Price £
FM01 - FM30 430mm 17.85
Each of the highly visible markers are printed onto the underside of a clear PVC film and then laminated on the back surface with an aggressive permanent adhesive.
They are suitable for use on dry, clean, flat sealed surfaces and although designed for the floor, the markers can be used on walls or anywhere a tough permanent sign is required.
Can be used on floors & walls
Other designs can also be printed. Please contact the sales office for further details.
Watch the video
STORAGE DESIGN LIMITED Beaverswood Catalogue 2013
STORAGE DESIGN LIMITED TEL:01446 772614 [email protected] www.storage-design.co.uk
Ring Tags
23See page 15 for Self-adhesive Label Holders
Stock Identification
Identifying stock on pallets has always been a problem. Our Pallet Marker is designed to fit securely around the corner upright of a Euro pallet, yet will adjust to fit most other pallets. Manufactured in flexible white PVC, this unique Pallet Marker can be written on with a marker pen, or labels can beadhered to the smooth surface.
Message Markers
Pallet Marker
Identification hanging plates suitable for wire shelving & cages, etc.
Supplied plain for writing on, alternatively printed labels printed to your design are available separately
Printed labels are priced on application please phone for details
RT2/1 & RT2/2 are only supplied with 1 or 2 digits max
Highly visible identification for pallets/products Choice of fixing options available Helps deter double stacking of pallets
As goods, boxes, cartons, pallets and crates are moved or stored in the warehouse, there are times when a message is needed either to identify or instruct the user as to what the goods are or what action needs to be taken.A message marker can provide a quick and easy solution. These high visibility yellow or white markers can be printed with your message or supplied plain for use with a wet wipe pen.There are two types of marker; an L shape angled marker (MES1) that gives a message area on one surface, and a V shaped marker (MES2) that has a message area on two surfaces. Both types of message marker have the option of being freestanding or having a self-adhesive or magnetic base. Both types of markers are sold in packs of five either blank or with identical black text. Please confirm print/text when ordering.
Ref Size (mm h x w) Character Pack Price £RT2/1* 220 x 270 1 1 10.80RT2/2* 220 x 270 2 2 14.40RT1116 110 x 160 N/A 10 21.90RT72 70 x 200 N/A 25 43.80RT38 35 x 80 N/A 50 45.30RT415 45 x 150 N/A 50 57.00
Please specify digit(s) required when ordering.* Price includes printing of maximum characters allowed.
MES1Y Price includes printing MES2Y Price includes printing
RT1116
RT2/2 RT38
Ref Fixing Size (mm h x w) Colour Pack Price £MES1W Freestanding 110 x 95 White 5 17.40MES1Y Freestanding 110 x 95 Yellow 5 17.40MES1W/SA Self-adhesive 110 x 95 White 5 18.30MES1Y/SA Self-adhesive 110 x 95 Yellow 5 18.30MES1W/M Magnetic 110 x 95 White 5 23.10MES1Y/M Magnetic 110 x 95 Yellow 5 23.10MES2W Freestanding 140 x 95 White 5 35.10MES2Y Freestanding 140 x 95 Yellow 5 35.10MES2W/SA Self-adhesive 140 x 95 White 5 36.00MES2Y/SA Self-adhesive 140 x 95 Yellow 5 36.00MES2W/M Magnetic 140 x 95 White 5 43.20MES2Y/M Magnetic 140 x 95 Yellow 5 43.20
Enables quick & easy identification of pallets
Adjustable fit
Water, grease & oil resistant
Ref Size (mm h x w) Pack Price £PM/50 75 x 470 50 45.00
STORAGE DESIGN LIMITED Beaverswood Catalogue 2013
STORAGE DESIGN LIMITED TEL:01446 772614 [email protected] www.storage-design.co.uk
24
Magnetic Numbers & Letters
See page 13 for Magnetic Ticket Holder
Numbers & Letters
Available in 23 & 43mm tile heights
Two tile heights, either 43mm with a 39mm high digit or 23mm with a 17mm high digit
Available with black digits on a white or yellow background
Allows for fast & easy labelling on any steel surface
Die-cut A4 sheets
Each sheet consists of the following characters:(Excludes arrows, commas and full stops etc.)
23mm Numbers0x31 1x31 2x17 3x17 4x17 5x17 6x17 7x17 8x17 9x17
23mm LettersAx12 Bx6 Cx8 Dx7 Ex21 Fx7 Gx7 Hx6 Ix16 Jx4Kx5 Lx7 Mx8 Nx12 Ox12 Px5 Qx3 Rx9 Sx8 Tx9 Ux8 Vx7 Wx3 Xx2 Yx2 Zx4
43mm Numbers0x11 1x10 2x5 3x5 4x5 5x5 6x5 7x5 8x5 9x5
43mm LettersAx3 Bx2 Cx2 Dx2 Ex4 Fx2 Gx2 Hx2 Ix3 Jx1Kx1 Lx2 Mx2 Nx3 Ox2 Px2 Qx1 Rx3 Sx3 Tx3 Ux3 Vx2 Wx1 Xx1 Yx1 Zx2
Magnetic tiles supplied on sheets as a combination of mixed alpha or numeric digits
Ref Size (mm) Type Colour Price £M23MIXW/N 23mm(h) Numbers White 18.75M23MIXY/N 23mm(h) Numbers Yellow 18.75M23MIXW/L 23mm(h) Letters White 18.75M23MIXY/L 23mm(h) Letters Yellow 18.75M43MIXW/N 43mm(h) Numbers White 18.75M43MIXY/N 23mm(h) Numbers Yellow 18.75M43MIXW/L 43mm(h) Letters White 18.75M43MIXY/L 43mm(h) Letters Yellow 18.75
STORAGE DESIGN LIMITED Beaverswood Catalogue 2013
STORAGE DESIGN LIMITED TEL:01446 772614 [email protected] www.storage-design.co.uk
Consecutive Number Tiles
25See page 17 for Ticket Pouches
Numbers & Letters
Magnetic & Self-adhesive Identification Tiles
Magnetic Tiles
Sold in packs of individual characters these screen printed magnetic tiles can be used on a steel surface in the warehouse or office. The tiles are available in packs of 5 identical characters,A-Z and 0-9.
Cost effective low volume solution
Easily & quickly updated/relocated
Purchase only what you need
Printed black on yellow
Sets of high visibility self-adhesive labels from 01 through to 100
Instant Identification
Available from stock
Ref Size (mm h x w) Digit (mm h) Pack Price £
CN23 30 x 25 20 1 12.00CN50 50 x 50 40 1 21.30
Highly visible printed black on yellow or black on white (Please specify)
Printed to your design with 1 or 2 characters
Choice of self-adhesive for permanent locations or magnetic for frequently changing locations
Price includes printing
Please note there is a £25.00 minimum order for this product
Ref Size (mm h x w) Fixing Pack Price £TA50 50 x 50 Self-adhesive 1 0.33TA70 70 x 70 Self-adhesive 1 0.45TA90 90 x 90 Self-adhesive 1 0.60TM50 50 x 50 Magnetic 1 0.93TM70 70 x 70 Magnetic 1 1.20TM90 90 x 90 Magnetic 1 1.71
Ref Size (mm h x w) Pack Price £M7/ State character required 70 x 70 5 5.82
STORAGE DESIGN LIMITED Beaverswood Catalogue 2013
STORAGE DESIGN LIMITED TEL:01446 772614 [email protected] www.storage-design.co.uk
Self-adhesive Labels - Numbers
F characters come in 8 sizes
Supplied on sheets of identical characters
Available from StockClear identification
Yellow supplied as standard - Please specify when ordering.
Clean peel – leaves no residue
8 sizes supplied in handy complete packs of numbers or letters
Easy warehouse identification
Bin numbering
These self-adhesive numbers and letters are printed black on yellow or black on white
ensuring high visibility identification.
Simple to apply, they can be quickly removed and leave no adhesive residue. They
are suitable for a variety of uses throughout the warehouse including labelling of
shelves, racking, bins and other areas. They are also suitable for use in the office for
labelling files etc.Cards of identical characters
F7
F4
F4 F3
F6 F1
F2
F5
F5F8
Self-adhesive Labels - Letters
26
Quality Removable Self-adhesive Labels
See page 11 for Warehouse Information Labels
Numbers & Letters
Ref Label Size Character Characters Colours Price £ (mm h x w) Height (mm) Per Card
F1 Pack 0 - 9 9.5 x 6 6 168 Yellow/White 9.60
F2 Pack 0 - 9 12.5 x 8.5 9 90 Yellow/White 9.60
F3 Pack 0 - 9 19 x 14 16 36 Yellow/White 9.60
F4 Pack 0 - 9 38 x 21 26 12 Yellow/White 9.60
F5 Pack 0 - 9 56 x 21 50 12 Yellow/White 13.50
F6 Pack 0 - 9 90 x 38 75 6 Yellow/White 18.60
F7 Pack 0 - 9 130 x 45 100 5 Yellow 24.00
F8 Pack 0 - 9 230 x 140 160 1 Yellow 24.00
Ref Label Size Character Characters Colours Price £ (mm h x w) Height (mm) Per Card
F1 Pack A - Z 9.5 x 6 6 168 Yellow/White 24.96
F2 Pack A - Z 12.5 x 8.5 9 90 Yellow/White 24.96
F3 Pack A - Z 19 x 14 16 36 Yellow/White 24.96
F4 Pack A - Z 38 x 21 26 12 Yellow/White 24.96
F5 Pack A - Z 56 x 21 50 12 Yellow/White 35.10
F6 Pack A - Z 90 x 38 75 6 Yellow/White 48.36
F7 Pack A - Z 130 x 45 100 5 Yellow 62.40
F8 Pack A - Z 230 x 140 160 1 Yellow 62.40
STORAGE DESIGN LIMITED Beaverswood Catalogue 2013
STORAGE DESIGN LIMITED TEL:01446 772614 [email protected] www.storage-design.co.uk
Individual Sheets of Characters
27See page 20 for Floor Identification Markers
Numbers & Letters
Actual size:F8 : Background
ArrowsArrowsIndividual characters
Yellow supplied as standard - Please specify when ordering.
Minimum order of 20 individual cards. These can be mixed sizes, colours & characters.
Specify characters required.
Ref Label Size Character Characters Colours Price £ (mm h x w) Height (mm) Per Card
F1 9.5 x 6 6 168 Yellow/White 0.96
F2 12.5 x 8.5 9 90 Yellow/White 0.96
F3 19 x 14 16 36 Yellow/White 0.96
F4 38 x 21 26 12 Yellow/White 0.90
F5 56 x 21 50 12 Yellow/White 1.35
F6 90 x 38 75 6 Yellow/White 1.86
F7 130 x 45 100 5 Yellow 2.40
F8 230 x 140 160 1 Yellow 2.40
These highly adaptable numbers and letters
come in the following sizes:
(dimensions in mm h x w)
F1 9.5 x 6 168 per cardF2 12.5 x 8.5 90 per cardF3 19 x 14 36 per cardF4 38 x 21 12 per cardF5 56 x 21 12 per cardF6 90 x 38 6 per cardF7 130 x 45 5 percardF8 230 x 140 1 per card
Available in 8 sizes & 2 colours
Supplied on sheets of identical characters
Tough vinyl labels that are easyto apply, but will remove cleanly when necessary
Suits a multitude of needs
F6
F1F2
F3
F4 F7
F8
F5
Ideal for bin numbering
Eliminate costly errors caused by bad handwriting
Characters - Individual Sheets
F8 characters : for high visibility graphics
Ref Label Size Character Characters Colours Price £ (mm h x w) Height (mm) Per Card
F3 Arrows 19 x 14 16 36 Yellow/White 0.96
F4 Arrows 38 x 21 26 12 Yellow/White 0.96
F5 Arrows 56 x 21 50 12 Yellow/White 1.35
F6 Arrows 90 x 38 75 6 Yellow/White 1.86
STORAGE DESIGN LIMITED Beaverswood Catalogue 2013
STORAGE DESIGN LIMITED TEL:01446 772614 [email protected] www.storage-design.co.uk
28
Frames4docs
See page 19 for Steel Tape
Document Display
Frames4docs are a unique range of colour coded frames designed for easy and prominent document display.
Perfect for use in offices, shops, libraries and throughout the workplace to display all types of literature, certificates and informa-tion. Colour coded using black, blue, green, red and yellow, ideal for
displaying health and safety information, fire notices, charts and any other information that needs to be shown prominently.
Frames4docs are ideal for the portrayal of important information and act as perfect reminders for all staff in 5S and Lean Manufacturing.
The magnetic Frames4docs have a very strong pull force and can be applied to any flat steel surface. The design allows for easy insertion and removal of documents without the necessity of moving the frame. However if required, simply lift and relocate your document at will. The magnetic frame also enables a docu-ment to be displayed cleanly without the use of nails and pins that could possibly damage the fixing surface.
Ref To Hold Document Size Pack Price £MFD2/10 A2 10 137.70MFD3/10 A3 10 84.90MFD4/10 A4 10 55.80MFD5/10 A5 10 45.00
Magnetic
R
Frame any sign, chart or document in seconds
Quick and easy to update the stored documents
Magnetic or Self-adhesive fixing
To fit - A2, A3, A4 & A5
Vertical or Horizontal format
5 colours and mixed colour pack available
Available in 4 sizes, to fit - A2, A3, A4 & A5
Magnetic
Please confirm colour choice when ordering: Blue = B / Black = BK / Green = G / Red = R / Yellow = Y
Chose from 5 colours or mixed pack (2 of each)
STORAGE DESIGN LIMITED Beaverswood Catalogue 2013
STORAGE DESIGN LIMITED TEL:01446 772614 [email protected] www.storage-design.co.uk
29See page 12 for Self-adhesive Ticket Holder
Document Display
The self-adhesive Frames4docs have a permanent, aggressive adhesive that has been selected to adhere to most sealed surfaces. This design allows for documents to be easily changed when required.
Ref To Hold Document Size Pack Price £SFD2/10 A2 10 135.50SFD3/10 A3 10 82.80SFD4/10 A4 10 54.00SFD5/10 A5 10 43.50
Self-adhesive
Watch the video:
Self-adhesive
Sealed or ferrous
metal surface
Frame profile
Self-adhesive or magnetic
Document
Frame
Please confirm colour choice when ordering: Blue = B / Black = BK / Green = G / Red = R / Yellow = Y
Suitable for a range of uses
A5
A4
A3 A2
STORAGE DESIGN LIMITED Beaverswood Catalogue 2013
STORAGE DESIGN LIMITED TEL:01446 772614 [email protected] www.storage-design.co.uk
26
316
436
A range of document pockets to suit most environments with magnetic or self-adhesive fixings. Also available as clip on and tie on to suit wire bins and cages.
The adhesive pockets are supplied with an aggressive adhesive tape along the top and bottom edge (A7 pocket has tape along the top edge only) for a permanent fixing.
The magnetic pockets are supplied with a magnetic strip along the top, so that they can be simply lifted and relocated when necessary.
Tie-on pockets can secure around a maximum diameter of 60mm, whilst clip-on pockets are ideal for use on wire bins and cages.
Keeps documentation clean
A3 Vertical
Suits A3-A7 inserts in vertical & horizontal formats
Industrial quality pockets with welded edges
Ideal for relocating on steel surfaces Permanent fixing
A3 Horizontal
436
316 A3 A3
Magnetic PocketsMagnetic Pockets Self-adhesive PocketsSelf-adhesive Pockets
30
Industrial Strength Clear Pockets
See page 14 for Magnetic Label Holder
Document Pockets
Watch the video
Ref Size (mm h x w) Suits Paper Size Pack Price £MP1122/10 110 x 215 - 10 24.60MP1111/10 110 x 110 - 10 19.95MP3H/10 316 x 436 A3 10 54.60MP3V/10 436 x 316 A3 10 54.60MP4H/10 215 x 310 A4 10 26.10MP4H/50 215 x 310 A4 50 98.40MP4V/10 310 x 220 A4 10 26.10MP4V/50 310 x 220 A4 50 98.40MP5H/10 155 x 230 A5 10 21.45MP5H/50 155 x 230 A5 50 78.60MP5V/10 215 x 160 A5 10 21.45MP5V/50 215 x 160 A5 50 78.60MP6H/10 110 x 155 A6 10 20.55MP6V/10 150 x 110 A6 10 20.55MP7H/100 60 x 110 A7 100 72.00
Ref Size (mm h x w) Suits Paper Size Pack Price £AP1122/10 110 x 215 - 10 23.40AP1111/10 110 x 110 - 10 16.50AP3H/10 316 x 436 A3 10 49.20AP3V/10 436 x 316 A3 10 49.20AP4H/10 215 x 310 A4 10 17.85AP4H/50 215 x 310 A4 50 78.60AP4V/10 310 x 220 A4 10 17.85AP4V/50 310 x 220 A4 50 78.60AP5H/10 155 x 230 A5 10 15.00AP5H/50 155 x 230 A5 50 62.10AP5V/10 215 x 160 A5 10 15.00AP5V/50 215 x 160 A5 50 62.10AP6H/10 110 x 155 A6 10 19.95AP6V/10 150 x 110 A6 10 19.95AP7H/100 60 x 110 A7 100 54.30
STORAGE DESIGN LIMITED Beaverswood Catalogue 2013
STORAGE DESIGN LIMITED TEL:01446 772614 [email protected] www.storage-design.co.uk
STORAGE DESIGN LIMITED Beaverswood Catalogue 2013
STORAGE DESIGN LIMITED TEL:01446 772614 [email protected] www.storage-design.co.uk
26 32
Magnetic Wrap-around Pockets
See page 8 for Hanging Markers
Document Pockets
Hanging Pockets
Full Adhesive Backed Pockets
Designed for industrial roll cages or mesh containers
Manufactured from tough plastic
Available from stock
New longer headers suit trolley handles
Three hard wearing information pockets in sizes A4, A5 and A6 which have a unique looped magnetic header that is designed to wrap around the mesh of a cage.
A special flap shields the opening of each pocket providing your document with protection from the elements.
Ref Size (mm h x w) Pack Price £WRP4V/10 297 x 210 10 39.30WRP5H/10 148 x 210 10 32.40WRP6H/10 105 x 210 10 29.10WRP4V/50 297 x 210 50 168.00WRP5H/50 148 x 210 50 138.60WRP6H/50 105 x 210 50 123.00
Two information pockets manufactured in tough plasticUnique hooked header design Available from stock
Ref Size (mm h x w) Pack Price £WCP4H/10 210 x 297 10 31.35WCP5H/10 155 x 220 10 25.20WCP4H/100 210 x 297 100 270.00WCP5H/100 155 x 220 100 201.90
Accepts A4 , A5 & A7 inserts
Adheres to any flat surface
Clear front allows barcodes to be scanned
A4, A5 and A7 size Document protection pockets for keeping information in the office, factory and warehouse environments. These clear pockets protect documents from dirt and grime. Simply peel of the adhesive backing sheet and adhere to a flat surface.
Ref Size (mm h x w) Document Size Pack Price £AW4H/50 217 x 302 A4 Horizontal 50 86.10AW4V/50 302 x 217 A4 Vertical 50 86.10AW5H/50 158 x 219 A5 Horizontal 50 49.20AW5V/50 219 x 158 A5 Vertical 50 49.20AW7H/50 80 x 115 A7 Horizontal 50 29.40
AcceptsA4
inserts
AcceptsA6 inserts
AcceptsA5 inserts
Fits around maximum diameter of 30mm
Our premium hanging pocket features a unique hooked header, designed to hang and grip onto the edge of an industrial wooden case. This pocket offers a dual function, to either store documents linked to the case or to provide identification where a conven-tional label will not adhere to the wooden surface. The hanging pocket is also suitable for trolleys, stillages, pallet converters and many more items that have a hanging rail of up to 25mm maximum thickness.
STORAGE DESIGN LIMITED Beaverswood Catalogue 2013
STORAGE DESIGN LIMITED TEL:01446 772614 [email protected] www.storage-design.co.uk
Suitable for use on whiteboards & planning boards, etc
5 sizes & 5 colour choices
1m permanent self-adhesive
A ruler that never gets lost
For bench top, racking or drawing board
easily cut to size if required
Ref Size (mm diameter) Qty per pack Price £MM10 10 100 20.85MM20 20 100 24.30MM25 25 100 28.80MM30 30 100 36.60MM36 36 100 49.20
Our memo magnets are suitable for use on whiteboards and any other steel surface throughout the warehouse, office or school area. They are available in 5 different diameters and in single or mixed colour packs.
Available in: White (W), Red (R), Green (G), Blue (B) & Yellow (Y) or alternatively in Mixed packs (M) of 20 of each colour. Please add colour ref to code when ordering.
For use with inkjet printers
Versatile magnetic paper
Available in a choice of matt or gloss finish
Standard thickness 0.25mm
Ref Description Qty per pack Price £MPM10 Matt A4 Paper - White 10 18.75MPG10 Gloss A4 Paper - White 10 18.75
Magnetic Paper
Print directly onto this special inkjet coated magnetic paper to produce your own magnetic notices, pictures or labels etc. Supplied in packs of 10 A4 sized sheets. These represent an economical and versatile method of printing. Once your item has been printed the sheets are easily cut/trimmed to the size or shape required.
A4 die cut sheets
Magnetic tiles for early learning years
Ref Description Tiles per sheet Tile height (mm) Price £M1PW Phonetic Set 128 25 18.75M1PW Word Set 114 15 18.75
Ref Size (mm h x w) Qty per pack Price £RUL1 40 x 1,000 (1m) 1 10.95
Magnetic Tiles for Early Learning Years
Self-adhesive Ruler
Sets of magnetic words and phonetics to help assist every child achieve their maximum learning potential. Ideal for use on magnetic boards. Each set is supplied on a die cut A4 sheet with bold black characters on a white background.
33See page 19 for Magnetic Self-adhesive Strip
Magnetic Accessories
Memo Magnets
STORAGE DESIGN LIMITED Beaverswood Catalogue 2013
STORAGE DESIGN LIMITED TEL:01446 772614 [email protected] www.storage-design.co.uk
Easy to fix, easy to remove
Hard-wearing & re-usable
Helps waste segregation
Easy collection of waste
Please specify design when ordering
Ref Size (mm h x w) Qty per pack Price £RSB1 1000 x 920 1 19.80RSB5 1000 x 920 5 92.70RSB10 1000 x 920 10 173.70
Waste management problems are easily solved with the racksack. Suitable for most warehouse racking systems, the racksack quickly fixes to the end of your racking frame.
The racksack is designed for most racking and shelving systems between 900mm and 1100mm. Once full, racksacks can be removed and emptied with ease.
The racksack has been thoughtfully developed so that it will not intrude into valuable warehouse space. When hung it has a large open mouth to easily receive waste, yet its tapered design enables it to hardly encroach into the floor area.
Originally designed for the warehouse the racksack’s flexible method of ‘S’ locator fixing means it can be can be hung over or hooked onto any substrate. That’s why the racksack has quickly established itself a place in other industrial areas such as factories, offices or anywhere where waste has become a problem.
Made from tough waterproof polyester the racksack can adequately withstand the rigours of an industrial environment.
Three strong handles are woven into the edge of the sack, one on each side for carrying and one on the base, so that the sack can be easily tilted from the base and emptied.
There are 14 design options available, 13 printed waste segregation options plus a completely blank sack. Dimensions 1000mm high x 920mm wide
Large waste capacity
Handles at the sides & base are double stitched to tough woven polyester
26 34 See page 22 for Floor Graphic Markers
Warehouse Recycling
STORAGE DESIGN LIMITED Beaverswood Catalogue 2013
STORAGE DESIGN LIMITED TEL:01446 772614 [email protected] www.storage-design.co.uk
35See page 46 for Custom Printed Signs
Warehouse Recycling
Available in a range of colour coded designs Alternative prints available on request which can incoporate company names and logos
End of aisle location
GW White MP Blue P Red
E Magenta GL TurquoiseA White WT BrownM White BM Brown BK Blank
SW RedPS Red
BLANK
ShrinkWrap
Electrical Glass
PlasticOnly
Mixed Paper& Card
GeneralWaste
PlasticStrapping
BuildingMaterial
C Blue MR Green
CardboardMixed
Recycling
MetalWood
& TimberAluminium
Watch the video
STORAGE DESIGN LIMITED Beaverswood Catalogue 2013
STORAGE DESIGN LIMITED TEL:01446 772614 [email protected] www.storage-design.co.uk
26 36
Pick Bin Flexi Identification Pockets
See page 17 for Location Markers
Bin & Trolley Identification
Highlight stock shortages
Helps eliminate picking errors
Ref Size (mm h x w) Qty per pack Price £FP1211/100 120 x 110 100 162.00
A simple system of identification for picking bins, that will save time and money and help eliminate those costly picking errors.
Each pocket size 120x100mm wide (internal size 110x95mm wide) has a unique self-adhesive hinge along the top edge.
This hinge is adhered to the underside of the bin, directly above that to be identified.
The pocket label can have a barcode incorporated, and even a picture of the component to be picked. Two labels can be used, so that when the bin is empty, the labels are reversed, highlighting that the component is out of stock. Labels not included, contact the sales office for further details.
Designed for the tote bin information panel
White polypropylene laminated labels 78 x 72mm wide
Sequential numbering
These tough scratch resistant labels have a permanent adhesive and are supplied in quantities of 1000 upwards. They are printed with your data and laminated for protection. The design of the labels can include barcodes.
Ideal for order picking
Accepts A4 and A5 landscape inserts
Clear front allows barcodes to be scanned
Ref Size (mm h x w) Qty per pack Colour Price £SHP4/W 235 x 320 10 White 76.50SHP4/Y 235 x 320 10 Yellow 76.50SHP5/W 175 x 230 10 White 60.00SHP5/Y 175 x 230 10 Yellow 60.00
Styrene Hanging Pockets
Our Styrene Pockets are available in two sizes, either A4 or A5 landscape formats and are ideally suited for hanging onto rails of trolleys or pallets up to a maximum rail width of 25mm.
Printed inserts available
Alternative sizes are available, contact our sales office for further details
Both sizes are available in white and yellow,please specify when ordering
Please call to obtain best prices
Non standard sizes are available on request
Tough Scratch Free Tote Bin Labels
STORAGE DESIGN LIMITED Beaverswood Catalogue 2013
STORAGE DESIGN LIMITED TEL:01446 772614 [email protected] www.storage-design.co.uk
37See page 21 for Floor Signals
Pallet Protection
Ref Size (mm h x w x l) Pack Price £SKS/100 150 x 170 x 170 100 (Price/pack for 1-4 packs) 69.90 (Price/pack for 5-9 packs) 66.60 (Price/pack for 10-29 packs) 63.30 (Price/pack for 30+ packs) 60.00
Can be used with either strapping or shrink wrap
Helps to reduce damage by preventing double stacking
Highly visible printed graphics
Transporting palletised loads from one destination to another by road haulier can be a hazardous business. Once collected from your warehouse, your consign-ment is likely to be off loaded at a number of depots before reaching its final destination. A clear warning sign is what’s required, to prevent another pallet from being stacked on top of your load during its travels.
With this is mind Pallet Topper, a pyramid shaped warning sign is designed to sit on top of a pallet, highlighting the fact that other pallets must not be stacked on your consignment. The clever design of Pallet Topper enables it to be firmly secured to the pallet strapping either during or after it has been strapped. Where a pallet is covered in clear stretch wrap, Pallet Topper can happily be wrapped inside the film, but still remains highly visible. The Pallet Topper is printed with both clear and easily understandable red and green graphic illustrations, but with no text, meaning regardless of your consignments destination all nationalities will easily understand the warning message portrayed. Pallet Topper provides a cost effective solution to what could be a very costly problem.
Manufactured from pre-creased cardboard, which is easily folded and slotted together. Pallet Topper is 170 x 170 x 150mm high and is supplied in packs of 100 pieces.
Secures onto pallets to prevent stacking
170mm
150m
m
Pallet Topper
STORAGE DESIGN LIMITED Beaverswood Catalogue 2013
STORAGE DESIGN LIMITED TEL:01446 772614 [email protected] www.storage-design.co.uk
STORAGE DESIGN LIMITED Beaverswood Catalogue 2013
STORAGE DESIGN LIMITED TEL:01446 772614 [email protected] www.storage-design.co.uk
39See page 23 for Message Markers
Floor Marking
Stencils
Available in 4 sizes
Quality re-usable stencils
Saves valuable time
Our stencils are manufactured from a rigid PVC film, each one is laser-cut for accuracy, with a transparent anti-glare finish which is naturally scratch resistant. If properly cared for, our stencils can be used again and again making them not only very economical but quick and easy to use saving valuable time compared to other methods of marking.
Quick & easy to use
Other designs & specials are available on request
1 Keep Clear 2 No Parking 3 Disabled
4 Visitor/Reserved 5 Private Parking 6 Arrow
7 Fragile This Way Up 8 Fragile 9 Walking Man 10 Feet
Ref Description Size (mm h x w) Pack Price £ST193/1 190 x 300 1 14.70ST304/1 300 x 400 1 18.45ST406/1 400 x 600 1 36.30ST608/1 600 x 800 1 67.20ST193/2 No Parking 190 x 300 1 14.70ST304/2 No Parking 300 x 400 1 18.45ST406/2 No Parking 400 x 600 1 36.30ST608/2 No Parking 600 x 800 1 67.20ST193/3 190 x 300 1 14.70ST304/3 300 x 400 1 18.45ST406/3 400 x 600 1 36.30ST608/3 600 x 800 1 67.20ST193/4 190 x 300 1 14.70ST304/4 ed 300 x 400 1 18.45ST406/4 400 x 600 1 36.30ST608/4 600 x 800 1 67.20ST193/5 Parking 190 x 300 1 14.70ST304/5 300 x 400 1 18.45ST406/5 400 x 600 1 36.30ST608/5 600 x 800 1 67.20ST193/6 190 x 300 1 14.70ST304/6 300 x 400 1 18.45ST406/6 400 x 600 1 36.30ST608/6 600 x 800 1 67.20ST193/7 300 x 190 1 14.70ST304/7 400 x 300 1 18.45ST406/7 600 x 400 1 36.30ST608/7 800 x 600 1 67.20ST193/8 300 x 190 1 14.70ST304/8 400 x 300 1 18.45ST406/8 600 x 400 1 36.30ST608/8 800 x 600 1 67.20ST193/9 300 x 190 1 14.70ST304/9 400 x 300 1 18.45ST406/9 600 x 400 1 36.30ST608/9 800 x 600 1 67.20ST193/10 300 x 190 1 14.70ST304/10 400 x 300 1 18.45ST406/10 600 x 400 1 36.30ST608/10 800 x 600 1 67.20
Keep Clear
No Parking
Disabled
Visitor/Reserved
Private Parking
Arrow
Fragile This Way Up
Fragile
Walking Man
Feet
STORAGE DESIGN LIMITED Beaverswood Catalogue 2013
STORAGE DESIGN LIMITED TEL:01446 772614 [email protected] www.storage-design.co.uk
26 40
Floor Marking Tape - 50mm Wide
See page 33 for Self-adhesive Ruler
Floor Marking
Tough, durable self-adhesive tapes
Highlights hazards or restricted areas
Easy to use applicator available
Ref Size (h x w) Pack Colour Price £LMT/B 50mm x 33m 1 Blue 6.90LMT/G 50mm x 33m 1 Green 6.90LMT/R 50mm x 33m 1 Red 6.90LMT/W 50mm x 33m 1 White 6.90LMT/Y 50mm x 33m 1 Yellow 6.90LMT/BY 50mm x 33m 1 Black/Yellow 7.65LMT/GW 50mm x 33m 1 Green/White 7.65LMT/RW 50mm x 33m 1 Red/White 7.65
Our range of lane marking tapes can be used to mark stairways, colour code walkways, workstation or storage areas within stores and warehouses.
Floor Lane Marking Tape is available in 4 colours:
Green, Red, White and Yellow
Black/Yellow Highlights general hazard areas and obstaclesRed/White Highlights fire protection equipmentGreen/White Highlights medical stores/safety equipment
Available in a range of colours with general uses:
Extra wide – 75mm rolls
High visibility demarcation
Ref Size (h x w) Pack Colour Price £LMT75/G 75mm x 33m 1 Green 13.80LMT75/R 75mm x 33m 1 Red 13.80LMT75/W 75mm x 33m 1 White 13.80LMT75/Y 75mm x 33m 1 Yellow 13.80
Floor Lane Marking Tape - 75mm wide
Manufactured from the same exacting standards as the 50mm wide, this extra wide lane marking tape will help delineate walkways and other areas within the workplace.
Easy to apply tapes without the necessity to bend down
Ensures accurate & quick delineation of areas
Accepts tapes up to 100mm wide
Ref Description Pack Price £FTA1 Tape Applicator 1 150.00
Lane Marking Applicator
STORAGE DESIGN LIMITED Beaverswood Catalogue 2013
STORAGE DESIGN LIMITED TEL:01446 772614 [email protected] www.storage-design.co.uk
41See page 18 for Matt Black Magnetic Strip
Anti-slip Flooring
Tough, durable & long lastingQuick & easy to apply anti-slip tape
Available in various widths and coloursSupplied in 18.3m rolls
Our anti-slip tape is manufactured through a unique process ensuring it’s one of the most effective anti-slip surfacing available. Our tapes have a thick carrier impregnated with diamond hard aluminium oxide making it hardy, tough, durable and long lasting. The backing has a heavy coating of perma-nent pressure sensitive adhesive which is water resistant and ensures once it’s down, it stays down.
Available in 4 colour options
Ref Size (h x w) Colour Price £AST25 25mm x 18.3m Black, Yellow, Black/Yellow, Clear 12.90AST50 50mm x 18.3m Black, Yellow, Black/Yellow, Clear 25.80AST100 100mm x 18.3m Black, Yellow, Black/Yellow, Clear 51.60AST150 150mm x 18.3m Black, Yellow, Black/Yellow, Clear 85.50
Supplied in packs of 5Anti-slip stair treads - plain or printed
Anti-slip Stair Treads
Our anti-slip treads are manufactured using the same high standard as our anti-slip tape and are ideally suited for use on stair treads or anywhere where the regular shape is required. Available in plain black or black and yellow with “Caution” and “Watch your step” messages printed onto the material. We can offer your own message to be printed, please enquire for further details.
Industrial strength adhesive & anti-slip properties
Anti-slip foot prints for marking out safe pedestrian routes
Supplied in packs of 10, 5 right & 5 left3 different designs to choose from
Anti-slip Feet
Please specify colour when ordering
Anti-slip Tapes
Ref Description Symbol Size (mm hxw) Colour Price £ASF/BK Standard 240 x 90 Black 20.85ASF/CL Foot 240 x 90 Clear 20.85ASF/YE 240 x 90 Yellow 20.85ASFY/B 240 x 90 Yellow/Black 20.85ASFTL/BK Foot with 210 x 120 Black 25.20ASFTL/YE Toes 210 x 120 Yellow 25.20ASFS/BK Small Foot 104 x 57 Black 16.80ASFS/YE with Toes 104 x 57 Yellow 16.80
Ref Size (mm h x w) Pack Colour Price £AST 150 x 610 5 Black 23.10AST/Caution 150 x 610 5 Black/Yellow 24.60AST/Step 150 x 610 5 Black/Yellow 24.60
Our anti-slip feet are ideal for creating marked pedestrian routes that also have the advantage of making a terrific anti-slip surface. Available in a choice of designs; standard, footprint, footprint with toes and small footprint with toes are ideal for environments that include children.
STORAGE DESIGN LIMITED Beaverswood Catalogue 2013
STORAGE DESIGN LIMITED TEL:01446 772614 [email protected] www.storage-design.co.uk
Indoor & outdoor materials available
Quality tie on industrial tags
2 part – perforated tags available
Highly visible identification
Our quality industrial tags are suitable for indoor and one for outdoor use, in a wide range of applications throughout the warehouse and factory. Available immediately from stock in quantities of 100 they ensure accurate stock and inventory control.
SIT/129 SIT/130 SIT/132 SIT/133
Bespoke tags in various sizes can be supplied printed on one or two sidesPlease contact the sales office for further details.
Ideal for harsh environments
Bespoke metal or plastic tags
Suits products & items that are difficult to label
Metal & Plastic Tags
Our industrial quality tags are ideal for marking products that are difficult to label. Available in metal or plastic, in various sizes and colours and printed to your design. The tags are suitable for use in harsh environments with plastic particularly suited to outdoor use. Tags can be sequentially numbered, barcoded or stamped to your design.
Metal tags are impervious to oil, grease, high temperature and exposed conditions and can be supplied with different finishes such as lacquered, embossed, paper covered and paper faced.
Please contact the sales office for prices & further details.
Ref Description Size (h x w) Pack Colour Price £SIT/126 Approved 120 x 60 100 Green 33.90SIT/127 Rejected 120 x 60 100 Red 33.90SIT/128 Repair/Service 120 x 60 100 Light Yellow 33.90SIT/129 Stock identity 146 x 73 100 Yellow 37.20 (Indoor use)
SIT/130 Stock identity 146 x 73 100 White 44.70 (Outdoor use)
SIT/131 Good received 146 x 73 100 Orange 37.20 (1 part)
SIT/132 Good received 146 x 73 100 White/Yellow 39.30 (2 part)
SIT/133 Numbered stock 146 x 73 100 Green/Blue/Red 39.30 control (2 part perforated) /Yellow (Please specify)
SIT/134 String ties 250 100 7.65SIT/135 Wire ties 250 100 7.65
mm
26 42
Industrial Tags
See page 32 for Full Adhesive Backed Pockets
Industrial Tags
STORAGE DESIGN LIMITED Beaverswood Catalogue 2013
STORAGE DESIGN LIMITED TEL:01446 772614 [email protected] www.storage-design.co.uk
43See page 32 for Magnetic Wrap around Pockets
Signage & Labelling
Due to the inherent weight, size and loads that modern day racking can attain, they must be checked regularly to ensure the safety of staff and visitors in the vicinity. Our racking tag holders are designed to be fixed to the crossbeams of the racking and display a racking safety message.A checklist on the racking insert describes the checks which must be made to the racking with a space for the inspection details to be recorded. An area is available for completion should intermediate work be required, whereas the insert should be removed totally if the racking is deemed unsafe to display the ‘Do Not Use, Unsafe Racking’ message.
All ladders should be checked daily prior to use for any damage faults or wear and tear. In addition they should be inspected at defined intervals as part of a risk assessment programme. Use these inserts to manage the identification, safety and maintenance of ladders and help conform to the Work at Height Regulations 2005.The Asset Tag Holder should be permanently fixed to the ladder in a suitable safe place. Perform an inspection of the ladder (a checklist is printed on the reverse) and record the result on the tag. If the ladder fails the inspection, remove insert and inform a supervisor.
Our universal Equipment Inspection record assists an employer to comply with legislative requirements to inspect and maintain equipment at suitable periods as deemed appropriate by risk assessment. The insert has clearly defined areas to record equipment identification or reference numbers, alongside an inspection record. This allows a user instant access to important safety information.Should equipment fail inspection for any reason, the tag can be removed to clearly display the message ‘Do No Use This Equipment’ which is printed on the border.
Ladder Safety
Equipment Safety
Racking Safety
Safety message if tag is removed
Ref Description Size (mm h x w) Pack Price £
TG09 Single insert 75 x 180 1 2.04TG09/10 Inserts 75 x 180 10 19.50TG09/50 Inserts 75 x 180 50 94.80TG09/BOX Box Kit 20 inserts, 10 holders, 1 pen 79.20TGRK5 Holders 80 x 210 5 35.70
Ref Description Size (mm h x w) Pack Price £
TG04 Single insert 180 x 50 1 1.65TG04/10 Inserts 180 x 50 10 15.90TG04/50 Inserts 180 x 50 50 76.50TG04/BOX Box Kit 10 inserts, 10 holders, 1 pen 71.70TG0T5 Holders 210 x 55 5 28.50
Ref Description Size (mm h x w) Pack Price £
TG05 Single insert 180 x 50 1 1.65TG05/10 Inserts 180 x 50 10 15.90TG05/50 Inserts 180 x 50 50 76.50TG05/BOX Box Kit 10 inserts, 10 holders, 1 pen 71.70TG0T5 Holders 210 x 55 5 28.50
Safety message is displayed if empty
Safety message is displayed if empty
Box Kit consists of 10 holders, 20 inserts and 2 pens.
Fixings not supplied - see page 19 for Magnetic Self-adhesive Tape and Double Sided AdhesiveTape.
Fixings not supplied - see page 19 for Magnetic Self-adhesive Tape and Double Sided AdhesiveTape.
Fixings not supplied - see page 19 for Magnetic Self-adhesive Tape and Double Sided AdhesiveTape.
STORAGE DESIGN LIMITED Beaverswood Catalogue 2013
STORAGE DESIGN LIMITED TEL:01446 772614 [email protected] www.storage-design.co.uk
Hazard Signs A range of signs designed to alert and warn of a potential danger
26 44
Mandatory Signs A range of signs designed to give specific instructions that must be carried out
See page 25 for Consecutive Number Tiles
Safety Signs
Supplied in rolls of 1,000 labels
Ref Size Price £S13840 300 x 200 6.64R13841 300 x 200 8.46
Ref Size Price £S11454 300 x 200 6.54R11455 300 x 200 8.46
Ref Size Price £S11442 300 x 200 6.54R11443 300 x 200 8.46
Ref Size Price £S11426 300 x 200 6.54R11427 300 x 200 8.46
Ref Size Price £S11446 300 x 200 6.54R11447 300 x 200 8.46
Ref Size Price £R12405 600 x 800 35.40
Ref Size Price £S11163 50 x 75 1.44R11164 50 x 75 1.71
Ref Size Price £S11434 300 x 200 6.54R11435 300 x 200 8.46S11436 600 x 400 15.90R11437 600 x 400 19.80
Ref Size Price £S11195 300 x 200 6.54R11196 300 x 200 8.46S11197 600 x 400 15.90R11198 600 x 400 19.80
Ref Size Price £S11131 300 x 200 6.54R11132 300 x 200 8.46S11133 600 x 400 15.90R11134 600 x 400 19.80
Ref Size Price £S11113 300 x 200 6.54R11114 300 x 200 8.46S11115 600 x 400 15.90R11116 600 x 400 19.80
Ref Size Price £S11039 300 x 200 6.54R11040 300 x 200 8.46S11041 600 x 400 15.90R11042 600 x 400 19.80
Ref Size Price £S11177 300 x 200 6.54R11178 300 x 200 8.46
Ref Size Price £S11175 300 x 200 6.54R11176 300 x 200 8.46
Ref Size Price £S11235 400 x 300 8.55R11236 400 x 300 10.50
Ref Size Price £S11029 300 x 200 6.54R11030 300 x 200 8.46
Ref Size Price £S11462 300 x 200 6.54R11463 300 x 200 8.46
Ref Size Price £S11414 300 x 200 6.54R11415 300 x 200 8.46
Ref Size Price £S11418 300 x 200 6.54R11419 300 x 200 8.46
Ref Size Price £S11324 100 x 100 1.74R11325 100 x 100 2.07
Ref Size Price £S11340 100 x 100 1.74R11341 100 x 100 2.07
Ref Size Price £S11480 300 x 100 2.34R11481 300 x 100 4.14S11482 300 x 200 6.54R11483 300 x 200 8.46
Ref Price £4701 21.60
Ref Size Price £S11161 50 x 75 1.44R11162 50 x 75 1.71
Ref Price £4710 21.60
Packing Labels
Dimensions in mm (hxw) Codes starting with S = Self-adhesive Vinyl / R = Rigid Plastic
Ref Size Price £13868 150 x 100 156.00
Ref Size Price £13871 150 x 100 156.00
Ref Size Price £13873 150 x 100 156.00
STORAGE DESIGN LIMITED Beaverswood Catalogue 2013
STORAGE DESIGN LIMITED TEL:01446 772614 [email protected] www.storage-design.co.uk
45See page 33 for Magnetic Paper
Safety Signs
No Smoking & Prohibition A range of popular No Smoking & Prohibition warning signs
Fire Exit & Safe Condition A range of signs designed to indicate safe exit routes, safe location & safety equipment
Ref Size Price £S12096 150 x 400 6.81R12097 150 x 400 8.19P12413 150 x 400 19.50
Ref Size Price £S12000 150 x 400 6.81R12001 150 x 400 8.19P12410 150 x 400 19.50
Ref Size Price £S12128 150 x 300 3.87R12129 150 x 300 4.77P12419 150 x 300 16.50
Ref Size Price £S12132 200 x 450 8.25R12133 200 x 450 9.90
Ref Size Price £S12140 100 x 600 6.54R12141 100 x 600 8.46
Ref Size Price £S12042 300 x 200 6.54R12043 300 x 200 8.46
Ref Size Price £S12048 300 x 200 6.54R12049 300 x 200 8.46
Ref Size Price £S12028 200 x 300 6.54R12029 200 x 300 8.46S12030 400 x 600 15.90R12031 400 x 600 19.80
Ref Size Price £S12092 150 x 400 6.81R12093 150 x 400 8.19P12411 150 x 400 19.50
Ref Size Price £S12104 150 x 400 6.81R12105 150 x 400 8.19P12414 150 x 400 19.50
Ref Size Price £S12306 202 x 82 2.61R12307 202 x 82 3.15
Ref Size Price £S12310 202 x 82 2.61R12311 202 x 82 3.15
Ref Size Price £S12308 202 x 82 2.61R12309 202 x 82 3.15
Ref Size Price £S12326 300 x 200 6.54R12327 300 x 200 8.56
Ref Size Price £S12322 300 x 200 6.54R12323 300 x 200 8.56Ref Size Price £
S12304 202 x 82 2.61R12305 202 x 82 3.15
Ref Size Price £S11808 150 x 100 2.01R11809 150 x 100 2.40S11810 300 x 200 6.54R11811 300 x 200 8.46S11812 600 x 400 15.90R11813 600 x 400 19.80
Ref Size Price £S11840 100 x 100 1.74R11841 100 x 100 2.07S11842 200 x 200 4.65R11843 200 x 200 5.52S11844 400 x 400 11.40R11845 400 x 400 13.80
Ref Size Price £S11630 300 x 200 6.54R11631 300 x 200 8.46S11632 400 x 600 15.90R11633 400 x 600 19.80
Ref Size Price £S11600 300 x 200 6.54R11601 300 x 200 8.46S11602 400 x 600 15.90R11603 400 x 600 19.80
Ref Size Price £S0587 50 x 50 9.96S0588 100 x 100 11.40
Ref Size Price £S0585 50 x 50 9.96S0586 100 x 100 11.40
Ref Size Price £S11626 300 x 200 6.54R11627 300 x 200 8.46S11628 600 x 400 15.90R11629 600 x 400 19.80
Ref Size Price £S13330 300 x 200 6.54R13331 300 x 200 8.46S13332 600 x 400 15.90R13333 600 x 400 19.80
Ref Size Price £S11634 300 x 200 6.54R11635 300 x 200 8.46
Ref Size Price £S11627 300 x 200 6.54R11673 300 x 200 8.46S11674 600 x 400 15.90R11675 600 x 400 19.80
Pre-cut CirclesText packs of pre-cut vinyl prohibition symbols
Supplied in packs of 10 Other symbols available
All signs comply with ISO EN 7010
Dimensions in mm (hxw)
Materials:S - Self-adhesiveR - Rigid non-adhesive PVCP - Self-adhesive rigid photoluminescent material
STORAGE DESIGN LIMITED Beaverswood Catalogue 2013
STORAGE DESIGN LIMITED TEL:01446 772614 [email protected] www.storage-design.co.uk
Please contact the sales office with your requirements and our team will get back to you with a competitive quotation and lead time.
26 46
Custom Signs
Custom Stencils
Custom Labels
Lockout Tagout
See page 6 for Angled Aisle Markers
Safety Signs
Screen printing
Our custom sign service is available for all your needs- from the largest of site signs on dibond or aluminium, through to engraved wooden or resin plaques to the smallest dye sublimation certificate, our custom sign service is here to help.
Our sign teams are expert at creating professional signs using a wide range of techniques on a massive range of available materials including:
Our in-house laser cutting machines are capable of cutting a wide range of bespoke stencils.
As well as the usual letter and number sets almost any message or logo can be converted into a stencil format.
Every year large numbers of workers are injured in industrial accidents resulting from the unexpected energisation, start up or release of stored energy. By ensuring that Lockout Tagout procedures are followed the risk of such incidents and accidents can be prevented.One of the most common occurrences of this happening is when an operator unknowingly activates equipment currently undergoing maintenance, causing harm to the operator and/or the maintenance personnel. By physically preventing the operator activating the equipment (Lockout) and highlighting that the equipment is unsafe for use (Tagout) thisaction can be prevented.
With in house design and manufacturing facilities,we can produce roll to roll labels to your specification.
Digital printing - flatbed and rolls
Laser cut acrylic designs
Dye sublimation
Engraving - both laser & CNC router
Pad printing
Hi-visibility graphic floor signs
Short/Long runs
Full colourLaminated
Any size
Any shapeVarious materials
High quality large format printing
Screen printing Digital printing
Laser precision cutting leaves a
sharp crisp edge
Please ask for details of our complete Lockout Tagout range.
STORAGE DESIGN LIMITED Beaverswood Catalogue 2013
STORAGE DESIGN LIMITED TEL:01446 772614 [email protected] www.storage-design.co.uk
Standard Sizes (mm h x w)
900 x 600 1200 x 900 1500 x 1200 1800 x 1200 2000 x 1200
*Please confirm if the size of the board is the overall or internal panel size.
Printed display boards manufactured to your specification
Magnetic coated steel supplied as standard
Professional look – improves your corporate brand image
Range of accessories available
Are you fed up of making do with a standard board? Do you have an idea of a board you would like? If the answer is yes to either of these questions let Beaverswood manufacture the right board for you.
Simply send a sketch of the board required telling us what size* you require (standard and special sizes available), what you want printing, colours and quantity. Once you place an order we will produce artwork and send you a pdf copy for approval before we go into production.
Our printing technology allows for permanent colouring of the whiteboard panel. The ink is heated and fused into the surface of the board, leaving a scratch free surface. The printing allows for extremely accurate graphic reproductions ensuring vivid and bright printing.
Simply send a sketch of the board required
47See page 18 for Magnetic Racking Strip
Information Boards
Magnetic Whiteboards
*Please confirm if the size of the board is the overall or internal panel size.
STORAGE DESIGN LIMITED Beaverswood Catalogue 2013
STORAGE DESIGN LIMITED TEL:01446 772614 [email protected] www.storage-design.co.uk
48
BLS1 Template - Simply photocopy & fax us with your requirements
See page 11 for Warehouse information Labels
BLS1 Template - not to scale. Actual size: 356 x 254 (mm h x w)
BLS1 Template
STORAGE DESIGN LIMITED Beaverswood Catalogue 2013
STORAGE DESIGN LIMITED TEL:01446 772614 [email protected] www.storage-design.co.uk
49See page 32 for Hanging Pockets
BLS5 Template
BLS5 Template - Simply photocopy & fax us with your requirements
BLS5 Template - not to scale. Actual size: 470 x 350 (mm h x w)
STORAGE DESIGN LIMITED Beaverswood Catalogue 2013
STORAGE DESIGN LIMITED TEL:01446 772614 [email protected] www.storage-design.co.uk
50
BLS6 Template - Simply photocopy & fax us with your requirements
See page 38 for Letter & Number Stencils
BSL6 Template - not to scale. Actual size: 297 x 400 (mm h x w)
BLS6 Template
STORAGE DESIGN LIMITED Beaverswood Catalogue 2013
STORAGE DESIGN LIMITED TEL:01446 772614 [email protected] www.storage-design.co.uk
51
Terms & Conditions
Installation - Terms & Conditions
Conditions of Sale
BASIS FOR SALEAll goods sold by The Company are sold subject to these conditions and these conditions shall be the sole terms and conditions of any sale by The Company to the Customer. Terms and conditions on the Customer’s order form or other document or otherwise shall not be binding on The Company. Amendments, variations or additions to the Contract are binding only if confirmed in writing by The Company.
ORDERS AND SPECIFICATIONS2.i Upon receipt of the Customer’s order The Company will confirm price, quantities and estimated delivery date.
2.ii Orders are accepted by The Company subject to the availability of goods for delivery.
2.iii All drawings, photographs, illustrations, performance data, dimensions, weights and other technical information and particulars of the goods are given by The Company in the belief that they are as accurate as reasonably possible but are not to be treated as binding or forming part of the Contract. The Company reserves the right to alter the design and specifications of the goods at any time without notice.
PRICE3.i Prices may be increased where there are increases in the materials prices, or other charges of The Company.
3.ii The price is exclusive of Value Added Tax and all other taxes, duties and expenses in respect of the goods, all of which shall be payable by the Customer.
3.iii Prices are ex-works and do not include delivery unless otherwise advised by The Company.
DELIVERY4.i Any dates stated for despatch or delivery of the goods are approximate only and The Company accepts no liability for loss or damage, either direct, indirect or consequential, resulting from such delay or failure to deliver the goods for any reason.
4.ii Any delay in delivering the goods shall not give any rise to a right by the Customer to treat the Contract as repudiated or to reject the goods.
4.iii If the Customer refuses or fails to take delivery of the goods at the time stated for delivery The Customer shall in addition pay all costs and expenses of such storage and any additional costs of carriage incurred.
4.iv The Customer shall inspect the goods on delivery and shall notify The Company in writing within three (3) days of any shortages or any damage in transit.
4.v The Company will not consider any claims made by the Customer in respect of shortages or damage in transit unless these conditions are observed.
RISK AND TITLE5.i The risk of loss and damage to the goods shall pass to the Customer immediately upon delivery.5.ii Until The Company has been paid in full for all the goods supplied to the Customer, The Company under this Contract, or any other between them and for all other sums due, The Company shall retain legal and beneficial title to the goods which the Customer shall hold as bailie and fiduciary for The Company.5.iii Nothing in this clause shall prevent The Company from suing for the price when due.
WARRANTIES AND LIABILITY6.i The Company warrants that, insofar as they have been manufactured by The Company, the goods will correspond with their specification at the time of delivery and will be free from defects in materials and workmanship for a period of twelve (12) months from the date of delivery. The Company will at its option refund the purchase price of, or repair or replace free of charge, such part of the goods which its examination confirms are defective provided:
6.ii The defect was notified to The Company within three (3) days from the date of delivery, or (where the defect or failure was not apparent on reasonable inspection) within a reasonable time after discovery of the defect or failure and in any event within (6) months of delivery.
6.iii The defects are not caused by fair wear and tear, neglect, misuse or improper adjustment.
6.iv The Customer has used the goods strictly in accordance with any instructions or recommendations of The Company.
6.v In no circumstance shall the Customer be entitled to reject the goods, delay acceptance or refuse payment of the price.
6.vi Except as expressly provided for in these conditions, all warranties and conditions expressed, implied, statutory or otherwise as to quality or fitness of any of the goods for any particular purpose or of any other kind except as to title are hereby excluded.
6.vii Except in respect of death or personal injury caused by The Company’s negligence, or by the goods being defective and in respect of loss or damage to private property caused by the goods being defective. The Company shall not be liable to the Customer by reason of any representtion, or any implied warranty, condition or other term, or any duty at common law, or under the express terms of the Contract, for any direct, indirect or consequential loss or damage (whether for loss or profit or otherwise), costs expenses or other claims for consequential compensation whatsoever (and whether caused by The Company its employees or agents or otherwise) which arise out or in connection with the supply of the goods to their use or resale by the Customer, except as expressly provided in these conditions.
GOVERNING LAWThe construction, validity and performance of the Contract shall be governed by English Law and the parties shall accept the jurisdiction of the English courts.
Beaverswood products are protected against copying. Copyright c Beaverswood Supply Co. Ltd 01/03/2013
We require unobstructed access to the installationsite from 8.00 a.m to 6.00 p.m each working day of installation.
We require a named Project Manager available to resolve any problems that may arise during the entire installation period.
Any standing time beyond our control will be chargeable.
We reserve the right to refuse an order should a site inspection or other factors reveal unexpected conditions.
We need to be advised of all health and safetyrequirements two weeks prior to the installation date.
In cold store installations, the customer must provide suitable clothing for the installers.
“The Company” is Beaverswood Supply Company Limited
1 5
6
7
2
3
4
STORAGE DESIGN LIMITED Beaverswood Catalogue 2013
STORAGE DESIGN LIMITED TEL:01446 772614 [email protected] www.storage-design.co.uk
Supplied by:
STORAGE DESIGN LIMITED Beaverswood Catalogue 2013
STORAGE DESIGN LIMITED TEL:01446 772614 [email protected] www.storage-design.co.uk
STORAGE DESIGN LIMITEDPrimrose HillCowbridgeSouth WalesCF71 7DUTel: 01446 772614Fax: 01446 774770email: [email protected] 1: www.storage-design.co.uk