wardrobe fitting
TRANSCRIPT
8/9/2019 Wardrobe Fitting
http://slidepdf.com/reader/full/wardrobe-fitting 1/14
Wardrobe Fittings
W a r d r o b e
F i t t i n g s
8/9/2019 Wardrobe Fitting
http://slidepdf.com/reader/full/wardrobe-fitting 2/14
124
Special Features
1. Refer drilling dimensions for cabinet & shutters. (Ref. Fig. 1 & 2).2. Fit the Runner track Guide track as required and screw them as shown.
(Ref. Fig.2 & 2A).3. Fit click on / slip on Hinges (not provided) on one side of the shutter (Ref. Fig,3),
Using Ø35 mm boring cutter.4. Fit the Folding Hinges in between the two shutters (Ref. Fig.3 & 3A) Template is
provided for drill holes for the Folding Hinges. (Ref. Fig,3B).5. Fit Hinged Runner with Quick release and Hinged Guide with Quick release to the
far side of second shutter. (Ref. Fig,3A), Using Ø35 mm boring cutter.6. Screw the Click on / Slip on hinge on to the Mounting plate which is fitted on the
inside of the cabinet. (Ref. Fig.4).7. Bring second shutter close to the first shutter (Ref. Fig.5) and push U Pin to engage.
(Ref. Fig.5A).8. Fold the shutters and engage roller into Runner Track Guide Track by pushing quick
release (Ref.Fig.6) Shutters can also be disengaged by pulling quick release down.
! Ergonomically designed for overlay sliding shutters, Bottom Guide Track is hidden.! Manufactured out of durable plastics.! High precision rolling.! Quick release mechanism provided.!
Templates provided for drilling.
Hi - Fold Fittings 200
Specifications
Code No.Item Max. Widthof EachShutter
Hi -Fold Fittings
Runner Track
Guide Track
HFF 200
HFF - RT
HFF - GT
500MM
Max. Weightof EachShutter
10 Kgs.
Fitting Instructions
Des. Reg. no. 205457
HINGED RUNNERWITH QUICK RELEASE
FOLDINGHINGE
HINGED GUIDEWITH QUICK RELEASE
* Click-on Hinge or Slip-on Hinge are not included
RUNNER TRACK
HINGED GUIDEWITH QUICK
RELEASE
CLICK ON HINGE (OVERLAY)*SLIP ON HINGE (OVERLAY)
(4 Nos)SINGLE HINGEDRUNNER WITHQUICK RELEASE
GUIDE TRACK
FOLDINGHINGE
Fig. 1
Calculation for door width/door panelsDoor width = inside cabinet width + (2 x overlay)Door panel width = inside cabinet width - A
+ (2 x overlay) / 2
For overlay more than 10 mm,C value = (overlay - 10) + 4
For min. overlay 10 mm,C value = 4 mm
'A'1.02.03.04.05.0
'B'15.515.014.514.013.5
31.0 32.0 15.0'A'
3 2
. 0 3 2
. 0
4.0
4 5
. 0 'B'
C
Ø 3 5
. 0
1 2 d e e p
'B'
Ø 3 5 .0 1 2 d e e p
Shutter Drilling Dimensions Fig. 2 Fig. 2A
30.025.5
CABINET 4 6
. 0
SHUTTER25.0
2 6
. 0
5 5
. 0 M i n
.
1 5
. 0 M i n
.
Side View of cabinet
8/9/2019 Wardrobe Fitting
http://slidepdf.com/reader/full/wardrobe-fitting 3/14
125
Fig. 3
Fig. 5 Fig. 6
RUNNER TRACK
PUSH QUICK RELEASETO ENGAGE
IN THE TRACK
PUSH QUICK RELEASETO ENGAGE
IN THE TRACK
GUIDE TRACK
Fig. 3A
2.0
5.0
3 2
. 0
32.0
0 Ø 5
.
Fig. 3B Fig. 4
8/9/2019 Wardrobe Fitting
http://slidepdf.com/reader/full/wardrobe-fitting 4/14
126
1. Refer drilling dimensions for cabinet & shutters. (Ref. Fig. 1 & 2).2. Fit the Runner track Guide track as required and screw them as shown. (Ref. Fig.2 &
2A).3. Fit click on / slip on Hinges (not provided) on one side of the shutter (Ref. Fig,3),
Using Ø35 mm boring cutter.4. Fit the Folding Hinges in between the two shutters (Ref. Fig.3 & 3A) Template is provided
for drill holes for the Folding Hinges. (Ref. Fig,3B).5. Fit Hinged Runner with Quick release and Hinged Guide with Quick release to the far
side of second shutter. (Ref. Fig,3A), Using Ø35 mm boring cutter.6. Screw the Click on / Slip on hinge on to the Mounting plate which is fitted on the
inside of the cabinet. (Ref. Fig.4).7. Bring second shutter close to the first shutter (Ref. Fig.5) and push U Pin to engage.
(Ref. Fig.5A).8. Fold the shutters and engage rollers into Runner Track Guide Track by pushing quick
release (Ref. Fig. 6) Shutters can also be disengaged by pulling quick release down.
! Ergonomically designed for overlay sliding shutters, Bottom Guide Track is hidden.! Manufactured out of durable plastics.! High precision rolling.! Quick release mechanism provided.!
Templates provided for drilling.
Hi - Fold Fittings 300
Special Features
Specifications
Code No.Item Max. Widthof EachShutter
Hi -Fold Fittings
Runner Track
Guide Track
HFF 300
HFF - RT
HFF - GT
500MM
Max. Weightof EachShutter
20 Kgs.
Fitting Instructions
Des. Reg. no. 205457
HINGED RUNNERWITH QUICK RELEASE
FOLDINGHINGE
HINGED GUIDEWITH QUICK RELEASE
* Click-on Hinge or Slip-on Hinge are not included
RUNNER TRACK
HINGED GUIDEWITH QUICK
RELEASE
CLICK ON HINGE (OVERLAY)*SLIP ON HINGE (OVERLAY)
(4 Nos)DOUBLE HINGEDRUNNER WITH
QUICK RELEASE
GUIDE TRACK
FOLDINGHINGE
Fig. 1
Calculation for door width/door panelsDoor width = inside cabinet width + (2 x overlay)Door panel width = inside cabinet width - A
+ (2 x overlay) / 2
For overlay more than 10 mm,C value = (overlay - 10) + 4
For min. overlay 10 mm,C value = 4 mm
'A'1.02.03.04.05.0
'B'15.515.014.514.013.5
31.0
Ø 3 5
. 0
1 2 d e e p
32.0 15.0
3 2
. 0
3 2
. 0 3 2
. 0
4 5
. 0
4.0
'A'
C
'B'
'B'
Ø 5 .3 0 2 d e
1 e p
Shutter Drilling Dimensions Fig. 2 Fig. 2A
30.025.5
4 6
. 0
6 4
. 0
CABINET
25.0 2 6
. 0
5 5
. 0 M i n
.
1 5
. 0 M i n .Side View of Cabinet
SHUTTER
8/9/2019 Wardrobe Fitting
http://slidepdf.com/reader/full/wardrobe-fitting 5/14
127
Fig. 3 Fig. 3A
2.0
5.0
3 2
. 0 . Ø 5
0
32.0
Fig. 3B Fig. 4
Fig. 5A PUSH U PIN TO ENGAGE
Fig. 5 Fig. 6
RUNNER TRACK
PUSH QUICK RELEASETO ENGAGE
IN THE TRACK
GUIDE TRACK
PUSH QUICK RELEASETO ENGAGE
IN THE TRACK
8/9/2019 Wardrobe Fitting
http://slidepdf.com/reader/full/wardrobe-fitting 6/14
128
Wardrobe Rail Fittings
1. Drill 2 holes on each internal side of wardrobe.2. First hole should be 24mm from the top internal face of
cabinet and centre distance to be 32mm apart. (Refer fig.1)3. Holes should be at equal height.
Fitting Instructions
Fig. 1
32.0
24.0
Oval Rail
Coat Hook
Rail Centre Support
Bracket
Special Features
! These oval wardrobe rail supports are die cast for strength and long life.! Easy to fit and compatible with a special oval rail.! Wardrobe rails are available in S.S 304 polished.! Coat hooks are also available.! System 32 compatible.! Rail centre supports are elegantly designed, manufactured out of Zinc alloy for strength and
increasing the load bearing capacity of wardrobe rails.
# Add 'B' or 'G' for Black or Silver Grey.
Length(mtr)Code Nos. FinishItem
1
2
WRF - R1A
WRF - R2A Aluminium AnodizedRail
-WRF - CH# Nylon Black or Silver GreyCoat Hook
-WRF - B1 Nickel PlatedBracket
-WRF - RS1 Nickel PlatedRail Centre Support
Specifications
1
2
WRF - R1S
WRF - R2SSS 304 Polished
Rail
8/9/2019 Wardrobe Fitting
http://slidepdf.com/reader/full/wardrobe-fitting 7/14
129
Wardrobe Lift -Side Mount
Special Features
! Having twin arm construction for strength.! Ideal for tall cupboards or shop wall displays.! Shirts, dresses, suits can easily be pulled
down for easy access or stored conveniently
out of the way.! Load capability is 10 kgs. Max.
Specifications
WLSM 1Code No.
1. Screw the Base Bracket to the side wall with the screws provided. (Ref. Fig.1).2. Insert the Base onto the Base bracket through the track provided in the Base (Ref. Fig.2).
3. Join Main pole with the Hanging pole by using the screw provided. Max. adjustment ofHanging pole is 240.0 mm (Ref. Fig.3).
4. Fit the Handle to Main pole with the screw provided (Ref. Fig.4).5. Pull the leg of system down and join with Hanging pole assembly by using End brackets
and screws provided (Ref. Fig.5).6. Internal cabinet width - 860 (34") Min. & 1100 (43.5") Max.
Fitting Instructions
Caution
1. Fit the Right and Left systems parallel to each other.2. While pulling the Main pole ensure that it is lying in the middle of the Hanging pole.
Fig. 1
Base Bracket
Fig. 3
M 2 4 0. 0 a x.
T t a l A d j u s t m e n t
oHanging Pole
Fig. 6 Pull to access
Fig. 2 Base
Fig. 4
Main polewith handle
Fig. 5
End Bracket
8/9/2019 Wardrobe Fitting
http://slidepdf.com/reader/full/wardrobe-fitting 8/14
130
Wardrobe Lift -Wall Mount
Special Features
1. Screw the Base plate to the wall with the screws and wall plugs provided (Ref. Fig.1).2. Insert the Base onto the Base plate through the track provided in the Base (Ref. Fig.2).
3. Join Main pole with the Hanging pole by using the screw provided. Max. adjustment ofHanging pole is 240.0 mm (Ref. Fig.3).
4. Fit the Handle to Main pole with the screw provided (Ref. Fig.4).5. Pull the leg of Base down and join with Hanging pole assembly by using End brackets
and screws provided (Ref. Fig.5).6. Angle adjustment support provided for maintaining the gap from wall (Ref. Fig.6).
Fitting Instructions
! Having twin arm construction for strength.! Ideal for tall cupboards or shop wall displays.! Shirts, dresses, suits can easily be pulled
down for easy access or stored conveniently
out of the way.! Load capability is 10 kgs. max.
Specifications
WLWM 1Code No.
Fig. 1
Base plate
Fig. 2
Base
Fig. 6
Angle Adj. Support
Pull to accessFig. 5
End Bracket
Fig. 4
Main pole
with handle
Fig. 3
Hanging Pole
2 4 0. 0 M a x.
T t a u t t o l A d j s
m e n
Caution
1. Fit the Base parallel to each other.2. While pulling the Main pole ensure that it is lying in the middle of the Hanging pole.
8/9/2019 Wardrobe Fitting
http://slidepdf.com/reader/full/wardrobe-fitting 9/14
131
Trouser & Sari Pullout
Fig. 1
Fig. 3
FIT RODSINTO HOLES(10 Nos)
Fig. 2
Fitting Diagram ForTrouser And Sari Pullout
FRONT VIEW
Inner slide
Base plate
Housing
Code No. CR TS 1
1. Pullout comes in disassembled condition and can be easilyassembled with 2 screws provided to the moving ball bearingslide, through the holes provided in the housing after aligningwith the inner slide. (Refer fig. 1).
2. Trouser and Sari Pullout, left hand or right hand screwassembly is common (Refer fig. 2).
3. The trouser rods are inserted, facing forward. Insert the rodwith handle in the first hole near the slide to pull out easily.(Refer fig 3).
4. Cabinet internal dimensions required -Min. Width = 500 mm, Min. Depth = 520 mm.
Fitting Instructions
! Precision ball bearings used for smooth easy movement.! Rods are manufactured out of SS 304 and have
protective plastic sleeves.! System 32 compatible.
Special Features
Specifications
8/9/2019 Wardrobe Fitting
http://slidepdf.com/reader/full/wardrobe-fitting 10/14
132
Fig. 2
Housing
Inner slide
Base plate FRONT VIEW
Fitting Diagram ForTie And Belt Pullout
Fig. 1
! Precision ball bearings used for smooth easy movement.! Rods are manufactured out of SS 304 and have protective
plastic sleeves.! System 32 compatible.
1. Pullout comes in disassembled condition and can be easilyassembled with 2 screws provided to the moving ball bearingslide, through the holes provided in the housing after aligningwith the inner slide. (Refer fig. 1)
2. Tie & Belt Pullout left hand or right hand screw assembly iscommon. (Refer fig. 2)
3. Cabinet internal dimensions required -Min. Width = 200 mm, Min. Depth = 520 mm.
Code No. CR TB 1
Fitting Instructions
Special Features
Specifications
Code No. TH12
! Elegantly designed.! Made out of SS 304.! Easy to use and fits on the
inside of any cupboard.! Special Clip provided for prevents the movements of
Holder. (Refer fig.1)! Also available with Nickle Plated Die cast brackets.
Special Features
SpecificationsFig. 1
Tie & Belt Pullout
Tie & Belt Holder
8/9/2019 Wardrobe Fitting
http://slidepdf.com/reader/full/wardrobe-fitting 11/14
133
Tie Rack
Trouser Rack
1. Screw the base of the Tie rack on the cabinet at the distance of 60 mm from the front edge. (Ref. Fig.1)2. Min. cabinet internal depth - 500mm.
Fitting Instructions
Specifications
TIR 1Code No.
Special Features! A pullout rack which is easy to install, ergonomically
designed and above all durable.! Manufactured out of aluminum and plastic.! It can hold over 16 ties and even has a special tray to
keep small articles.
Fig.1
64.0
Front edgeof Cabinet
Side View
60.0Min.
6 2
. 0
1. Screw the base of the Tie rack on the cabinet at thedistance of 60 mm from the front edge. (Ref. Fig.1)
2. Pull the rack to fold to save space. (Ref. Fig.2)3. Min. cabinet internal depth - 500mm.
Fitting Instructions
! A pullout rack which is easy to install, ergonomically
designed and above all durable.! Manufactured out of aluminum and plastic.! It can hold trousers and sarees.! It can be folded down to save space.
Special Features
Specifications
TRR 1Code No.Fig.1 Side View
60.0Min.
Front edgeof Cabinet
6 2
. 0
Fig.2
Pull to fold