wamba farming equipment: piggery equipment · wamba farming equipment: piggery equipment . m. hot...
TRANSCRIPT
WAMBA FARMING EQUIPMENT: PIGGERY EQUIPMENT
FE
ED
DE
LIV
ER
Y S
YS
TE
M
HOT GALVANIZED SILO
Material :hot galvanized sheet(zinc layer 275g/m2)
Advantages:
➢ Standard ladder with protective hoop, safe and reliable.
➢ High intensity and nice sealing effect.
➢ Ring section is designed with water dripping slope, convenient for rain flowing down.
➢ The ring sheet and bottom sheet are designed with observation hole. It is with high intensity, nice
sealing effect and good perceptivity.
➢ All the standard parts are processed with special galvanizing. The rubber washer is endurable for 10
years without aging.
Models and parameters:
No
Coding Capacity
(m³) Legs Silo pcs H h A B C D
Foundation size
(mm)
1 FA09-1 4.4 4 1 4100 1000 1834 1296 410 1590 2500*2500*500
2 FA09-2 6.8 4 2 5000 1000 1834 1296 410 1590 2500*2500*500
3 FA09-3 9.2 4 3 5900 1000 1834 1296 410 1590 2500*2500*500
4 FA02-1 11.7 6 1 4700 1000 2750 1375 680 1970 3600*3600*500
5 FA02-2 16.9 6 2 5600 1000 2750 1375 680 1970 3600*3600*500
6 FA02-3 22.1 6 3 6500 1000 2750 1375 680 1970 3600*3600*500
7 FA04-1 24.5 8 1 5700 1000 3668 1403 940 2790 4200*4200*500
8 FA04-2 33.8 8 2 6600 1000 3668 1403 940 2790 4200*4200*500
9 FA04-3 43.1 8 3 7500 1000 3668 1403 940 2790 4600*4600*500
10 FA04-4 52.4 8 4 8400 1000 3668 1403 940 2790 4900*4900*500
FIBERGLASS SILO
Models and parameters:
No
Coding
Capacity
(m³)
Legs Silo pcs H h A B Foundation size(mm)
1 FA16 1.9 3 2 3150 1000 1400 1334 2000x2000x500
2 FA17 3.7 3 2 3850 1000 1630 1530 2300x2300x500
3 FA18 7.3 3 2 4850 1000 2080 1914 2700x2700x500
4 FA19 11 3 2 5550 1000 2300 2122 2800x2800x500
5 FA20 14.6 4 2 6450 1000 2300 1734 2800x2800x500
6 FA21 18.2 4 3 6450 1000 2630 1987 3000x3000x500
Advantages:
➢ High rigidity, molded with vacuum assistance.
➢ Nice intensity, the bending and tensile strength
can both reach around 270-300Mpa;
➢ Anti-corrosive, above 20 years’ service life proved by salt spray test.
➢ Nice sealing effect by Swiss sikaflex glue sealing, ultraviolet resistant.
➢ Beautiful appearance, specially processed LOGO,
resistant to color fading.
HOPPER
Material: hot galvanized sheet, zinc layer above 180g/㎡.
Models and parameters:
No
Capacity
(m³) Capacity
(KG)
Legs H h A B E
Foundation size(mm)
(C*D*H1)
Foundation size(mm)
(C*D*H1)
1 0.3 180 4 1623 640 746 746 2500 2800x1600x1400 1600*1600*1400
2 0.6 360 4 1750 640 1008 1008 2800 2800x1800x1500 1800*1800*1500
3 0.9 600 4 2005 640 1208 1208 3400 3000x2000x1800 2000*2000*1800
4 1.2 800 4 2256 640 1211 1211 3800 3000x2000x2000 2000*2000*2000
5 1.5 1000 4 2446 634 1249 1249 3200 3000x2000x2200 2000*2000*2200
6 2.3 1500 4 2290 530 1554 1504 3500 3200x2300x2000 2300*2300*2000
7 3.1 2000 4 2690 530 1554 1504 4200 3200x2300x2400 2300*2300*2400
8 3.8 2500 4 2990 530 1554 1504 4800 3200x2300x2700 2300*2300*2700
SILO ACCESSORIES
Coding (mm)
DIMENSIONS
DESCRIPTION (kg)
WEIGHT
FB0302100A 460*400*430
2.5 Feed dispenser:
Fiberglass material, hot-dip galvanizing support
Avoid feed blockingping, for all silos.
Coding (mm)
DIMENSIONS
DESCRIPTION (kg)
WEIGHT
FB01021000
231*131*159
7.4 FB0102100A
Vibration motor:
Active power 0.4KW, Ingress Protection: IP65
Assisting feed delivering from silo, avoid feed
blocking
Coding (mm)
DIMENSIONS
DESCRIPTION (kg)
WEIGHT
FB01020100
φ450*312
φ440*312
7 FB0102010H
Transforming adapter:
Q235 hot-dip galvanizing, zinc layer≥80μm on
average.
Applied with Big Herdsman galvanized silo
Coding (mm)
DIMENSIONS
DESCRIPTION (kg)
WEIGHT
FB0102011G φ450*355
2.5
Transforming adapter:
Black PP material
Applied with Big Herdsman galvanized silo
(single auger)
Coding (mm)
DIMENSIONS
DESCRIPTION (kg)
WEIGHT
FE02024020 φ450*355
3.3
Feed collecting piece
SS.304 material
Applied for Big Herdsman Silo manual feed
delivery
Coding (mm)
DIMENSIONS
DESCRIPTION (kg)
WEIGHT
FE02026000 φ450*355
26
Feed delivery slide shut-off
Q235 hot galv., zinc layer≥80μm on
average
For Big Herdsman silo manual feed
delivery
AUGER FEEDING SYSTEM
This feed loading system delivers feed to feed doser, dry and liquid feeder, feed trough or such
feeding units. One feed sensor is placed at the end of the feed line, which will automatically control the
motor for auto feed control.
This feed line applies to automatic feed delivery for all kinds of pig houses and for pigs at all raising
phases. It can realize automatic feeding at set time and set feeding amount, which saves much labor for
you.
Technological parameters for different models:
Auger feed line models 125 90 75 60
Feed pipe diameter(mm) Φ125 Φ90 Φ75 Φ60
Feed pipe wall thickness(mm) 4.8 4.3 3.6 4.5
Feed pipe material PVC PVC PVC PVC
Motor Voltage(V) 380 380 380 380
Frequency(Hz) 50 50 50 50
Ingress Projection IP54 IP54 IP54 IP54
Power(kw) 1.5 1.5 0.75 1.1 0.75 1.1 1.1
Speed ratio 1:5 1:3 1:5 1:3 1:5 1:3 1:4.2
Output speed (r/min) 290 483 290 483 290 483 345
(kg/h)
Feed delivery capacity(kg/h) 5500 8000 2100 2400 1100 1400 600
Max delivery distance 25 40 60 100
Feed pipe length (mm) 4000 4000 4000 3350
Bent pipe R(mm) 1830 1850 1550 1550
Auger outer diameter(mm) 95 70.5 60.5 42.8
Auger inner diameter(mm) 67 46.5 36.5 26.8
Auger cross section width(mm) 14 12 12 8
Auger cross section thickness(mm) 5.2 4 4 3.85
Auger thread pitch(mm) 66 65 60 40
KEY PARTS
Coding (mm)
DIMENSIONS
DESCRIPTION (kg)
WEIGHT
GDCD001000
157*213*497
12.6
GDCE000100 15.2
Driver:
Power: 0.75KW, 1.1KW and 1.5KW
Speed ratio: 1:3, 1:5 and 1:5.7
Shell, input and output flange made of cast
aluminum, fast heat emission, rust-resistant.
Stable and reliable performance. Applied for 60, 75, 125 auger feed line respectively.
GDCF000200
Coding (mm)
DIMENSIONS
DESCRIPTION 重量(kg)
WEIGHT
FB03030000 489*296*352
4.6
FB01030100 547*296*400 4.7
FB0203010A 554*296*400
Slanting single outlet hopper base:
Dimension: 60, 75, 90 and 125. Q235 hot dip galvanizing, zinc layer≥80μm on
average.
For single auger feed line, associated with hot
galvanized transforming adapter.
5.5
FB04040000
Coding (mm)
DIMENSIONS
DESCRIPTION (kg)
WEIGHT
FC0103010B 437*208*190
4.4
Coding (mm)
DIMENSIONS
DESCRIPTION (kg)
WEIGHT
FB03060100
236*186*388
2.9
FB01060100 2.95
FB02060200 Connecting box:
Connecting box models for 60、75、90 and 125 feed
line respectively. Q235 hot galvanized material, zinc layer≥80μm on
average.
For feed line ending connection with driver.
3
FB04120000
FB02030000 497*208*190
Flat single outlet hopper base:
Dimension: 75 and 90
Hot galvanized sheet, zinc layer≥275g/ ㎡ on
average.
Formed by molding, for single auger feed line,
associated with PP transforming adapter.
4.6
Coding (mm)
DIMENSIONS
DESCRIPTION (kg)
WEIGHT
GQAA000020 φ42.8
0.67/m
GQAA000040 φ60.5 0.97/m
GQAA000050 φ70.5 Auger:
Specifications: 60, 75, 90 and 125.
Tempered carbon-manganese steel
Applied for 60PVC pipe.
1.07/m
GQAA000080 φ95 2.21/m
Coding (mm)
DIMENSIONS
DESCRIPTION (kg)
WEIGHT
FB03040000 φ80*460
3.4
FB01040100 φ94*467.5 5.8
FB02040100 φ112*469.5
Shaft component:
Specifications: 60, 75, 90 and 125.
Q235 galvanized, with bearing, smooth turning and less resistance.
Applied for auger feed line.
9.1
FB04030000
Coding (mm)
DIMENSIONS
DESCRIPTION (kg)
WEIGHT
GSGC00011F φ60*2.5*90°
8.6
GSGC00017F φ60*2.5*30° 2.9
GSGC00012F φ76*3*90° 13.1
GSGC00018F φ76*3*30° Bent pipe:
4.4
GSGC00019F φ89*3*90° Specifications60, 75 and 90
Angle: 30° and 90°
Q235 hot galvanized, zinc layer≥80μm on average.
18.4
GSGC00023F φ89*3*30° 6.2
GSGA00058B φ125*4.8*30°
125
PVC 2.4
125 bent pipe:
Wear-resisting PVC pipe, one end flared
Coding (mm)
DIMENSIONS
DESCRIPTION (kg)
WEIGHT
GSGA00040A φ60*4.5*3350
3.7
GSGA00008B φ75*3.6*4000 4.5
GSGA00010B φ90*4.3*4000 Feed pipe:
Specifications: 60, 75, 90 and 125
Wear-resisting PVC pipe, one end flared.
6.5
GSGA00059B φ125*4.8*4000
Coding (mm)
DIMENSIONS
DESCRIPTION (kg)
WEIGHT
DSAKI02080 φ30
0.05 Feed sensor:
Imported
CHAIN FEEDING SYSTEM
This system is used for pig and poultry powder feed or pellet feed delivery and dozed feeding. The disc
chain moves in the feed pipe, and the feed is pushed forward by the nylon disc in the chain, so that the
feed will be delivered from the silo or manual hopper to each feed drop part along the feed pipe. The
feed will drop down to each feeding unit via feed doser or tee joint.
This feed line can meet restriction feeding, non-restriction feeding, feeding at set time and in set
amount and other different requirements for all kinds of pigs.
Main technological parameters:
Pig pan feed line diameter 60
Motor
Voltage(V) 380
Frequency(Hz) 50
Ingress Protection IP54
power(kw) 1.5
speed ratio 31.43
Output speed (r/min) 46
Feed delivery capacity (kg/h) 1500
Maximum horizontal delivery
distance
360 (including 12 corners)
Feed pipe diameter (mm) Φ60 φ60
Feed pipe wall thickness (mm) 1.5 4.5
Feed pipe material PVC
Hot galvanized PVC
Feed pipe length (mm)
6000/unit 3350/unit
KEY PARTS
Coding DIMENSIONS DESCRIPTION (kg)
WEIGHT
FE0201100J 1110x340x430
57.7
DRIVE UNIT. STAINLESS STEEL Ø 60:
Imported, motor with aluminum alloy shell, nice heat
emission performance and rust-resistant. Driving box made of SS. 430, rust-resistant.
Transparent cover, convenient to observe inside
operation and feed delivery condition.
Coding (mm)
DIMENSIONS
DESCRIPTION (kg)
WEIGHT
FE0205010C φ43*70
0.58/m
FE0205010C φ42*70
60 disc chain:
The chain is directly welded with 20Mn2, breaking force above 1.8 tons.
Disc adopts nylon 66 material, high intensity and
wear-resisting.
Disc interval 70mm. Applied for 60 pan feed line.
0.57/m
Coding (mm)
DIMENSIONS
DESCRIPTION (kg)
WEIGHT
FE02013020 φ58*8 0.01
FE0201302A φ58*8
Feed pipe cleaning pan:
Specifications: 58mm and 53mm, applied for
galvanized pipe and PVC pipe of pan feed line. Tear-resisting PU (polyurethane) material
For cleaning the feed left in corner and feed pipe.
Coding
(mm)
DIMENSIONS DESCRIPTION
(kg)
WEIGHT
FE0201500A 1300*740*375
8 Driving box rain cover:
Fiberglass material, integral molded,
beautiful and long lasting
Coding (mm)
DIMENSIONS
DESCRIPTION (kg)
WEIGHT
FE02021010 545*297*400
9.1
FE02021030 545*368*400
Adjusting box:
Single/ double outlet, two options for single
and double pan feed line respectively. SS
430 shell, nice rust-resistant performance.
Designed with vibration protecting mesh,
preventing foreign objects getting in and
avoid feed blocking.
Transparent view window for feed
observation.
Applied for single silo and single pan feed
line.
13.6
Coding (mm)
DIMENSIONS
DESCRIPTION (kg)
WEIGHT
FE02021060 543*496*381
18
Feed return preventing hopper base:
SS 430 shell, nice rust resisting
performance.
Transparent view window for feed
observation.
Separate auger delivers feed for pan feed
line, completely avoid feed return via
gang control.
Coding (mm)
DIMENSIONS
DESCRIPTION (kg)
WEIGHT
FE0204000B 354*354*63
5
FE0204000C 354*354*63
60 corner
SS 304 and hot galvanized material for your
option All standard parts made of SS material.
Capable of dismantling without tools.
6
Coding (mm)
DIMENSIONS
DESCRIPTION (kg)
WEIGHT
FB03050000 φ60*1.5*6000
13
GSGA00040A φ60*4.5*3350
60 feed pipe:
Galvanized and PVC pipe for your option, with flared end.
The pipe is rolled by hot galvanized sheet, zinc layer ≥275g/㎡.
PVC pipe adopts tear-resisting PVC material.
3.7
Coding (mm)
DIMENSIONS
DESCRIPTION (kg)
WEIGHT
GSGA00055B φ60*2.0*500
0.26 60 transparent tube
Transparent PC material
Nice transparency, high intensity.
For feed sensor installation or other position that need to observe the feed position.
Coding (mm)
DIMENSIONS
DESCRIPTION (kg)
WEIGHT
FB03080000 440*181*548
6.4
Feed line medicator:
SS 304 shell
For adding vitamin, medicine or other feed additives
(powder), max medicine adding speed is 10kg/h. Associated with 60 pan feed line or auger feed line.
Coding (mm)
DIMENSIONS
DESCRIPTION (kg)
WEIGHT
DSAKI02080 φ30
0.05 Feed sensor Imported
ACCESSORIES
Coding (mm)
DIMENSIONS
DESCRIPTION (kg)
WEIGHT
FE02053000 φ60*200
0.37 Feed pipe cover:
Rolled by hot galvanized sheet, zinc layer ≥275g/㎡
For 60 feed pipe connection
Coding (mm)
DIMENSIONS
DESCRIPTION (kg)
WEIGHT
FE02051000 90*88*15
0.15
FB01050200 113.5*114*20 0.24 Main feed pipe clamp:
Specifications: 60, 75, 90 and 125.
Q235A material, dacromet surface.
For 60 feed pipe connection. FB0105020A 131*133.5*20 0.29
Coding (mm)
DIMENSIONS
DESCRIPTION (kg)
WEIGHT
FB01090500
+
FE02033070
115*91*76
0.23
FE02033030
+
FE02033070
122*103*76
Feed drop pipe clamp:
Specifications: 60 and 75
Q235 material, dacromet surface.
Associated with clamp lock piece, used for feed pipe
and 3/4” tube fixation.
0.24
Coding (mm)
DIMENSIONS
DESCRIPTION (kg)
WEIGHT
WZ0100080A 90*80*71
0.24
WZ01000800 100*80*75 0.25
WZ01000600 80*77*66 Double U clamp:
4 models: for 1” tube and 1/2” tube fixation, 1” tube
and 3/4” tube fixation, 3/4” tube and 1/2” tube
fixation, and 3/4” tube and 3/4” tube fixation
respectively.
Q235A material, dacromet surface.
For tube cross fixation.
0.23
WZ0100060A 90*77*70 0.24
Coding (mm)
DIMENSIONS
DESCRIPTION (kg)
WEIGHT
GSGA00035A φ63*2.2
0.5
GSGA00034A φ75*2.2
PVC tube:
For feed drop from tee, associated with 75 pipe, feed
drop amount adjustable. 0.6
Coding (mm)
DIMENSIONS
DESCRIPTION (kg)
WEIGHT
FE02032010 φ136*412
0.24
FE0203203A φ70*79 0.04 Feed collecting funnel kit:
PP material, components are funnel and connecting piece.
There are two models of connecting piece, 60 and 75
Used for feed drop between feed dozer and feed drop
pipe, height adjustable.
FE02032020 φ86*79 0.05
Coding (mm)
DIMENSIONS
DESCRIPTION (kg)
WEIGHT
FE02032050 500*80*670
1 Double outlet feed drop pipe:
Semi-transparent PE material, top inlet ID=φ76mm
Applied for branch feed drop.
Coding (mm)
DIMENSIONS
DESCRIPTION (kg)
WEIGHT
FE0203315X φ60*2
2.84/m FE0203316X φ60*2 Feed drop pipe: Three models: bent, slant ending, flat ending
Q235 hot galv., zinc layer no less than 80μm.
For feed drop from feed dozer FE0203317X φ60*2
Coding
(mm)
DIMENSIONS
DESCRIPTION (kg)
WEIGHT
FB03091000 420*420*320
4.8/5.0
Transit hopper:
SS 430 material
Transparent view window for feed observation
Applied for 60/75 feed line relay or transition
Coding (mm)
DIMENSIONS
DESCRIPTION (kg)
WEIGHT
FB01070700 373*210*117
3.1
FB03070300 373*210*108
Double outlet feed drop hopper:
60 and 75 two models
SS 430 material
Associated with transit hopper, realizing two main feed line turned into one sub feed line.
2.8
Coding (mm)
DIMENSIONS
DESCRIPTION (kg)
WEIGHT
FC0607000B 222*126*225
5.7
Euro winch:
Q235 color zinc plating
Speed ratio 1:5, load bearing≤400kg
For dozer feed line lifting
Coding (mm)
DIMENSIONS
DESCRIPTION (kg)
WEIGHT
FE02061910 326*163*81
2.4 Electric push bar:
Imported, 24V, pull force 4000N, stroke 150mm, Ingress Protection IPX6
For dozer feed line device lifting
Coding (mm)
DIMENSIONS
DESCRIPTION (kg)
WEIGHT
FC0604000C + FE0206140A
φ90*100
5.7 Universal pulley and bracket:
Pulley diameter φ90, nylon material
Q235 hot galvanized bracket
Divert to different angles For feed dozer feed drop ball lifting
Coding (mm)
DIMENSIONS
DESCRIPTION (kg)
WEIGHT
FE0201107A φ32*φ4*289
0.6 Reset spring: Piano wire, dacromet surface
For feed dozer feed release device resetting
Coding (mm)
DIMENSIONS
DESCRIPTION (kg)
WEIGHT
EC0302000E φ5*115
17.8
EC0302000F φ5*80
Steel bar:
Self-straightening plastic coated steel bar, low
ductility, preventing different lifting level between feed line front and ending, for feed drop ball lifting.
12.8
Coding mm)
DIMENSIONS
DESCRIPTION (kg)
WEIGHT
HF0200003D φ60*1000*15
0.14
HF0200003E φ75*1000*15 0.17 Rubber-plastic heat insulation tube: Three models: 60, 75 and 90
Rubber-plastic material, black
Nice thermal insulation effect, flame-resistant
HF0200003F φ90*1000*15 0.2
Coding (mm)
DIMENSIONS
DESCRIPTION (kg)
WEIGHT
HF0200003B φ60*1000*15
0.14
HF0200003A φ75*1000*15 0.17 PE heat insulation tube: Three models: 60, 75 and 90.
White PE material
With tin foil paper outside, nice thermal insulation
and waterproof effect.
HF0200003C φ90*1000*15 0.2
Coding (mm)
DIMENSIONS
DESCRIPTION (kg)
WEIGHT
HF02000010 2000x1000x15
1.2
Heat insulation panel:
White PE material, with tin foil paper outside, nice
thermal insulation and waterproof effect. Associated with heat insulation tube for feed line
thermal insulation.
Coding (mm)
DIMENSIONS
DESCRIPTION (kg)
WEIGHT
HF02000040 1000*0.4*L
0.5/㎡
PAP panel:
Photo thermal reflectivity>85%
Flame-resistant, waterproof and anti-aging.
Associated with heat insulation tube and heat
insulation panel, prolong the service life of insulation tube and panel.
Coding (mm)
DIMENSIONS
DESCRIPTION (kg)
WEIGHT
HF02000020 40*L
ᅳ Tin foil adhesive tape/PAP adhesive tape
For heat insulation tube/ panel fixation
TEE FEED DROP DEVICE
Coding (mm)
DIMENSIONS
DESCRIPTION (kg)
WEIGHT
FE0203400A 128*100*165
0.24
FB0105010A 148*125*195 0.32
FB02050100 148*125*195
Tee:
Four models: 60, 75, 90 and 125 PP material
Fast feed dropping, designed with rope controlled
slide shut-off inside, nice shutting effect.
Associated with adjustable feed pipe, feed drop amount adjustable.
FB04080000
Coding (mm)
DIMENSIONS
DESCRIPTION (kg)
WEIGHT
FE02037000 600*140*354
4
FE02038000 600*140*362 4.4 Big tee:
Three models: 60, 75 and 90
SS+fiberglass 110mm feed drop outlet
Rope controlled shut-off slide FE02039000 600*140*370 4.9
Coding (mm)
DIMENSIONS
DESCRIPTION (kg)
WEIGHT
FE0203700A 485*142*240
2.9
FE0203800A 485*157*240 3.6 Electric big tee:
Three models: 60, 75 and 90
SS 430 material
110mm feed drop outlet, fast feed dropping rate
Associated with electric push bar for out-house feed
line auto feed drop
FE0203900A 485*172*240 3.7
FEED DOSER
Advantages:
➢ 8L capacity,meeting 1-2 day feed amount requirement.
➢ Centro-symmetrical structure, avoid gravity caused deviation which lead to dosing error.
➢ Medicine adding cover design avoids cover missing, and can be hanged with sow info card.
➢ Removable bottom cone part, easy for cleaning.
➢ Fusiform adjusting panel pressing against the scale, the minimum scale pitch is 0.1L, which reduce
the error caused by manual operation.
。
Easy feed doser and feed pipe fixation can be fixed
within 15s.
。
Fission structure, easy splitting and
convenient for cleaning
The adjusting panel is made into fusiform, beautiful
and can act as pointer.
The scale can be accurate to 0.1L.
There are both weight and volume value for your
reference.
This medicine adding inlet is for manual or
automatic medicine adding.
The cover is in anti-loss design.
You can also hang sow info card to the
cover.
FEED-SAVING SOW FEEDER
A Mode B Mode C Mode
The feed drop speed can be adjusted via changing the space between inner cylinder and plastic ball.
When the feeder is not used, the plastic ball will seal the feed drop outlet under gravity. When the pigs are
eating, they will hog the plastic ball up, so that the feed get into the feed trough via outer cylinder.
Different feeding mode can be realized by working with different accessories.
Advantages
1. Keep the feed fresh, alow the sows to be fed with fresh feed 24hs a day.
2. Reduce the feed waste.
3. Better lactation, higher mating rate, higher weaning body weight
KEY PARTS
Coding (mm)
DIMENSIONS
DESCRIPTION (kg)
WEIGHT
FH05090000 φ130*290
1.5 Feed drop device:
Nylon body, SS adjusting bar
Coding (mm)
DIMENSIONS
DESCRIPTION (kg)
WEIGHT
FH05090500 370*180*450
1.5 Semi-transparent hopper: PP material
Associated with feed drop device as in feeding mode
C
Coding (mm)
DIMENSIONS
DESCRIPTION (kg)
WEIGHT
φ117*700*2.5
1.1 Transparent tube:
Transparent PVC material Component for feeding mode A and B
Coding (mm)
DIMENSIONS
DESCRIPTION (kg)
WEIGHT
φ80*150
-
φ75*150
Soft tube:
Two models: φ80 and φ75, associated with feed
dozer and tee, anti-corrosive and anti-aging. Component for feeding mode A and B
-
FEEDER SYSTEM
FH SS. FEEDER (PANEL ACTUATING TYPE)
Advantages: 1. Height adjustable feed actuating panel, making sure the pigs can be fed with fresh feed anytime. 2. Increase the feed turning rate, reduce feed wasting. 3. 304 SS material, sturdy and reliable structure. 4. The water drinking trough enable the piglet find water easily.
FH07 SS Nursery Feeder
No Coding Feeding
Space A B C D
Feeding
Capacity/
pigs
Drinker
Drinking trough Volume/L Weight/Kg
1 FH07220000 4 512.5 432 638 254 24-32 w/o w/o 55 27.4
2 FH07230000 6 768 432 638 254 36-48 w/o w/o 82.5 35.5
3 FH07240000 8 1023.5 432 638 254 48-64 w/o w/o 110 44.7
4 FH07250000 10 1279 432 638 254 60-80 w/o w/o 137.5 53.4
5 FH07260000 12 1534.5 432 638 254 72-96 w/o w/o 165 62.6
6 FH0722000A 4 512.5 432 638 254 24-32 w/ w/o 55 28.2
7 FH0723000A 6 768 432 638 254 36-48 w/ w/o 82.5 36.8
8 FH0724000A 8 1023.5 432 638 254 48-64 w/ w/o 110 46.3
9 FH0725000A 10 1279 432 638 254 60-80 w/ w/o 137.5 55
10 FH0726000A 12 1534.5 432 638 254 72-96 w/ w/o 165 64.3
11 FH0722000B 4 512.5 432 638 254 24-32 w/ w/ 55 30.4
12 FH0723000B 6 768 432 638 254 36-48 w/ w/ 82.5 39
13 FH0724000B 8 1023.5 432 638 254 48-64 w/ w/ 110 48.5
14 FH0725000B 10 1279 432 638 254 60-80 w/ w/ 137.5 57.2
15 FH0726000B 12 1534.5 432 638 254 72-96 w/ `w/ 165 66.5
Attention: This feeder model applies for 5-45kg nursery pigs.
FH08 SS Finishing Feeder
No Coding Feeding
Space A B C D
Feeding
Capacity/ pigs Drinker Volumn/L Weight/Kg
1 FH08220000 4 764.5 554 786 380 64 w/o 120 40.5
2 FH08230000 6 1146 554 786 380 96 w/o 180 54.9
3 FH08240000 8 1527.5 554 786 380 128 w/o 240 68.5
4 FH08250000 10 1909 554 786 380 160 w/o 300 83.7
5 FH08260000 12 2290.5 554 786 380 192 w/o 360 98
6 FH0822000A 4 764.5 554 786 380 64 w/ 120 43.6
7 FH0823000A 6 1146 554 786 380 96 w/ 180 59.2
8 FH0824000A 8 1527.5 554 786 380 128 w/ 240 73.9
9 FH0825000A 10 1909 554 786 380 160 w/ 300 90
10 FH0826000A 12 2290.5 554 786 380 192 w/ 360 105.8
Attention: this feeder model applies for 23-136kg fattening pigs.
FH09 SS Wean to Finish Feeder
No Coding Feeding
Space A B C D
Feeding
Capacity/
pigs
Drinker Drinking
trough
Volumn/
L Weight/Kg
1 FH09220000 4 764.5 554 786 380 48-64 w/ w/ 120
43.4
2 FH09230000 6 1146 554 786 380 72-96 w/ w/ 180
59.3
3 FH09240000 8 1527.5 554 786 380 96-128 w/ w/ 240
74.3
4 FH09250000 10 1909 554 786 380 120-160 w/ w/ 300
91
5 FH09260000 12 2290.5 554 786 380 144-192 w/ w/ 360
106.7
6 FH0922000A 4 764.5 554 786 380 48-64 w/o w/ 120
44.7
7 FH0923000A 6 1146 554 786 380 72-96 w/o w/ 180
60.7
8 FH0924000A 8 1527.5 554 786 380 96-128 w/o w/ 240
75.9
9 FH0925000A 10 1909 554 786 380 120-160 w/o w/ 300
92.4
10 FH0926000A 12 2290.5 554 786 380 144-192 w/o w/ 360
108.7
11 FH0922000B 4 764.5 554 786 380 48-64 w/o w/o 120
47.6
12 FH0923000B 6 1146 554 786 380 72-96 w/o w/o 180
63.6
13 FH0924000B 8 1527.5 554 786 380 96-128 w/o w/o 240
78.8
14 FH0925000B 10 1909 554 786 380 120-160 w/o w/o 300
95.3
15 FH0926000B 12 2290.5 554 786 380 144-192 w/o w/o 360
111.6
Attention: this feeder model applies for 5-136kg weans to finish pigs.
FH SS. FEEDER (ROD ACTUATING TYPE)
FH01 SS Nursery Feeder
No Coding Feeding
Space A B C D
Feeding
Capacity/ pigs Volumn/L Weight/Kg
Single/
double side
1 FH01012000
3 450 300 550 150 18 28.5 13.3 Single side
2 FH01013000 4 600 300 550 150 24 38 16.1
3 FH01014000 5 750 300 550 150 30 47.5 18.9
4 FH01021000 4 300 500 550 150 24 38 16.2
Double side
5 FH01022000 6 450 500 550 150 36 57 20.3
6 FH01023000 8 600 500 550 150 48 76 24
7 FH01024000 10 750 500 550 150 60 95 28.1
FH02 SS Fattening Feeder
No Coding Feeding
Space A B C D
Feeding
Capacity/ pigs Volumn/L Weight/Kg
Single/ double
side
1 FH02011000 3 750 385 700 250 24 63 22.2
Sigle side 2 FH02012000 4 1000 385 700 250 32 84 28.3
3 FH02013000 5 1250 385 700 250 40 105 33.6
4 FH02021000 6 750 770 700 250 48 135 35.9
Double side 5 FH02022000 8 1000 770 700 250 64 180 43.3
6 FH02023000 10 1250 770 700 250 80 225 50.9
Attention: this feeder model applies for 25-130kg fattening pigs.
DRY& LIQUID FEEDER
No
Coding Capacity
(L) H H1 h h1 A B C D
Feeding
Capacity/ pigs
适
Applicable pigs
1 FH03000000 100 1260 930 120 106 620 750 610 399 40 6kg-30kg
2 FH0300000A 100 1260 930 120 106 620 750 610 399 40 6kg-30kg
3 FH04000000 100 1440 1120 187 92 864 884 760 530 40 18kg-100kg
4 FH0400000A 100 1340 1020 159 92 774 884 760 530 40 18kg-100kg
AD LIBITUM CYLINDER FEEDER
No Coding A B C D Feeding
Space
Feeding
Capacity/ pigs
Capacity
(L)
Applicable
pigs
1 FH12000000 762 559 564 76 10 40 106 5-30KG
2 FH13000000 914 787 800 127 8 60 159 25-130KG
3 FH14000000 914 787 800 127 8 60 159 5-130KG
CL
IMA
TE
CO
NT
RO
L S
YS
TE
M
CLIMATE CONTROL
NAMES
DESCRIPTION BRANDS
BH 3209
Climate
Controller
Climate controller Specially
designed for pig farms.
Big Herdsman
Extended control of 5 fan
groups at most.
Automatically control air inlet
and lifting panel door opening amount.
Including 2 sets analog signal output, automatically control 2
speed-adjusting fan groups.
Auto control heating system,
cooling pad system and high/ low
temperature alarm.
Set with temperature curve
inside; automatically adjust to
required temperature as per pig growing.
Capable of connecting to 3 in-house temperature sensors and 1
out-house temperature sensor at
most.
Capable of water and feed
consumption calculation.
NAMES DESCRIPTION BRANDS
Extended control of 8 fan
groups at most.
Automatically control air inlet and lifting panel door
opening amount.
Including 2 sets analog signal output, automatically
control 2 speed-adjusting fan
groups.
Auto control heating systm,
cooling pad system, feeding
system, fogging system, lighting system and high/ low temp alarm.
Set with temperature curve
inside, automatically adjust to the
required temprature as per pig
growing.
Capable of connecting to 3
in-house temperature sensors and 1 out-house temperature sensor at
most.
Capable of connecting to 1
CO2 sensor, detecting CO2
density.
Capable of water and feed
consumption calculation.
NAMES DESCRIPTION BRANDS
Data searching, reviewing
and changing for contrller in each house.
Cilimate controller historical data storage and backup copy
Ranked message sending when there is high/low temp
alarm.
NAMES
DESCRIPTION BRANDS
Farm
Online
Management System
Applicable to all models of
Big Herdsman Climate
Controllers
Big
Herdsman
Online management
computor is capable of uploading data to group center
via internet.
Group center provide data
WEB release service. User can
login to check the data via
computor or cell phone and so on.
On site map navigation, clear display and simple
operation.
Remote reading and
changing the data in controller.
Browing and printing related
data in variouse format.
GALVANIZED FAN
coding type power
air quantity energy
efficiency
ratio
m³/h/w
(mm)
dimension
(±5mm)
opening
dimension 0 Pa 12 Pa 25 Pa 37 Pa 50 Pa
EF1000000X
1.1kw 41000 39000 36400 33700 30500 26.2 1380x1380x
1576 1400x1400
50” Box Fan
(2013 model)
EF1300000X
1.1kw 46500 44400 41900 39400 36600 30.1
1380*1380*
450
1400x1400
50” Cone Fan
(2013 model)
EF1200000X
1.1kw 49000 45900 42700 38700 33900 40.5 1555*1700*
1360
(H)1620x
(W)1500 54” Cone Fan
(Down dip
Structure)
coding type power
(m³/h)
air quantity
energy
efficiency
ratio
m³/h/w
(mm)
dimension
(±5mm)
opening
dimension 0 Pa 10Pa 20 Pa 30 Pa 40 Pa
EF0615000X 1.1kw 42300 41300 39200 37700 35900 26.1 1375*1600*
1356
Brick wall:
(H)1400 x
50”
Butterfly
Cone Fan
(W)1410
Steel wall:
1400x1400
EF00000XXX
1.1K
W
38400 37000 35900 34300 32800 25.5 1380x1380x
460
Brick wall:
(H)1400 x
(W)1410
Steel wall:
1400x1400
50” box fan
EF01000XXX
0.4K
W 17100 15750 14400 12550 10700 25.4
1000*1000*
460 1020x1020
36” box fan
FIBERGLASS CONE FAN
coding type power
(m³/h)
blast capacity
energy
efficiency
ratio
m³/h/w
(mm)
dimension
(±5mm)
opening
dimension 0 Pa 12 Pa 25 Pa 37 Pa 50 Pa
EF1409000X
1.5kw 58200 54900 51400 47500 42700 31.9 1590*1640*
1270
(W*H)
:1530*1560 55” fiberglass
cone fan
EF1509000X
1.1kw 48100 45300 41800 38200 34800 30.6
1495*1530*
1205
(W*H)
:1435*1470 55” fiberglass
cone fan
EF1609000X
0.75kw 24000 22400 21000 19000 16700 23 1155*1
155*1200
(W*H)
:1095*1095 36” fiberglass
cone fan
EF1709000X
0.3KW
11800 10800 10100 9200 8000 21
800*800*10
05
(W*H)
:735*735 24” fiberglass
cone fan
EF2009000X
0.15K
W 5820 5300 4700 3710 2550 28.4
655*65
5*905
(W*H)
:575*575 18” fiberglass
cone fan
OTHER FAN MODELS
CODING (L/mm)
DIMENSIONS
DESCRIPTION
(kg)
WEIGHT
EF040000XX 765*765*900
40kg 24” cone fan, 0.37kw, mainly used for minimum ventilation associated with air inlet, for spring and
autumn ventilation and cross ventilation.
CODING DIMENSIONS
DESCRIPTION (kg)
WEIGHT
EF041000XX 765*765*940
36kg 24” fan, with rain shield, 0.37kw, with air deflecting
housing, avoid inter-house air pollution.
AIR INLET
CODING DIMENSIONS
DESCRIPTION (kg)
WEIGHT
EF070000XX
H=2650,
(OD)=φ660
(wall thickness) 4.5
79kg 24” roof fan, 0.37kw, for poultry and livestock
house ventilation
CODING DIMENSIONS
DESCRIPTION (kg)
WEIGHT
EF220000XX H=2650 ,
(OD)=φ760mm
。
72kg 28” roof fan, 0.55kw, polyethylene integral molded, the
air inlet opening is controlled by air valve actuator controller, which can open or close the baffle plate and
avoid air return effectively. This model is used for poultry
and livestock house ventilation.
CODING DIMENSIONS DESCRIPTION (kg)
WEIGHT
EC01010000
(W)=600mm
(H)=320mm (Depth)=160mm
Side wall air inlet (spring type), MPS (Modified Polystyrene)
material, anti-aging, endurable in low and high temperature.
Capable of 108°arbitrary opening amount
CODING DIMENSIONS DESCRIPTION (kg)
WEIGHT
EC0100000C 790*790*210
Four-side ceiling air inlet, for ventilation all year round. The
opening amount will be automatically adjusted as per fan operation, no need for motor or manual control.
CODING DIMENSIONS DESCRIPTION (kg)
WEIGHT
EC0100000D 790*300*210
Double-side ceiling air inlet, for ventilation all year round. The opening amount will be automatically
adjusted as per fan operaion, no need for motor or manual
control.
CODING DIMENSIONS DESCRIPTION (kg)
WEIGHT
EC010000MG 630*630mm
(double side)
EC010000NG 800*630mm
(double side)
Ceiling air inlet, for pig house all year round ventilation.
The opening amount will be automatically adjusted as per fan operation, manual control or auto control with driver.
CURTAINS
CODING DIMENSIONS DESCRIPTION (kg)
WEIGHT
EC0100000X 585*565mm
Side wall transparent air inlet, no need for any driving
device. The opening can be automatically adjusted as per
the in-house static pressure, which realizes even air letting in.
CODING DIMENSIONS DESCRIPTION (kg)
WEIGHT
EC11000000 opening dimension
615*735
Auto balance air inlet, mounted to ceiling, no need for
any driving device. The opening can be automatically
adjusted as per in-house static pressure, which realizes
even air letting in. Please lock it when it’s not in use in summer.
CODING DIMENSIONS DESCRIPTION (kg)
WEIGHT
L*1200*35mm , L is
decided as per fan
airflow
Lifting panel door, main composing material is
high intensity PVC panel, coated with anti-
corrosive galvanized sheet. Designed with
double direction guide rail, and the system is
easily controlled by steel wire suspension
system.
CODING DIMENSIONS DESCRIPTION (kg)
WEIGHT
EM010101XX (H)* (L) mm,
H≤2.8m,
200g/m² Rolling curtain is made of double side PE coated cloth, added with anti-corrosive and wear-resistant
material, easily rolling up or rolling down.
CODING DIMENSIONS DESCRIPTION (kg)
WEIGHT
EM010101XX (H)* (L) mm,
H≤2.8m,
200g/m2 Lifting curtain is made of double side PE coated
cloth, weight≥200g/m2, added with additive and
anti ager, which prolongs its service life.
CODING DIMENSIONS (kg)
WEIGHT
ES0201020X
(Thickness):
0.1m、0.15m
(W):0.3m、0.6m
(H):1.5m、
1.8m、2.0m
Cooling pad is processed with special formula and has nice water absorbing performance. It can
effectively control the in-house temperature
associated with fans and climate controller.
Aluminum alloy frame, beautiful and endurable. The system is with high intensity and is climate-resistant.
Even water distribution for its tight structure.
AIR FILTRATION
CODING DIMENSIONS DESCRIPTION (kg)
WEIGHT
L*1200
Primary air filtering cloth:
High density, anti-pollution, anti-corrosive, endurable
in both low and high temperature.
Filtering range 5~20 μ m
CODING DIMENSIONS DESCRIPTION (kg)
WEIGHT
EK02010000 240*240*20
Primary air filter Adopt MERV8 filter material, humidity-resistant and
wear-resistant.
Filtering grade G4, bio aerosol particle eliminating
efficiency raised by 35%.
CODING DIMENSIONS DESCRIPTION (kg)
WEIGHT
EK02020000 240*240*120
Sub high efficiency air filter Adopt MERV15 filter material, humidity-resistant and
wear-resistant.
Filtering grade H8, filtering efficiency Log6
/MERV15
PE
NN
ING
SY
ST
EM
FARROWING PEN
PF01 PF02 PF11 PF12
2.4 2.4 2.2 2.2
0.6 0.6 0.6-0.7 0.6-0.8
1.0 1.05 1.1 1.1
B01
B02
B03
B04
B01
B02
B03
B04
B01
B02
B03
B04
B01
B02
B03
B04
666
576
477
666
576
477
666
576
477
666
576
477
sow: drinking bowl/
nipple drinker
piglet: drinking bowl/
nipple drinker
sow: drinking bowl/
nipple drinker
piglet: drinking bowl/
nipple drinker
sow: drinking bowl/
nipple drinker
piglet: drinking bowl/
nipple drinker
sow: drinking bowl/
nipple drinker
piglet: drinking bowl/
nipple drinker
Farrowing pen is specially made for sow farrowing period, for lactation. The main parameters are as
follows:
Models
PF01
Round Tube Fixed
Type
PF02
Round Steel Fixed
Type
PF11
Adjustible Type
PF12
Comprehesive Type
Material Round tube Round steel Round tube Round tube
Length(m) 2.4 2.4 2.2 2.2
Width(m)
(middle to 0.6 0.6 0.6-0.7 0.6-0.8
middle)
Height (m) 1.0 1.05 1.1 1.1
Anti-pressing
bar U shape U shape U shape Floating
Piglet
restriction bar w/o w/o w/ w/
Piglet PVC
panel
B01 type□
B02type□
B03type□
B04type□
B01type□
B02type□
B03type□
B04type□
B01type□
B02type□
B03type□
B04type□
B01type□
B02type□
B03type□
B04type□
Sow feeder
PE feeder□
SS feeder□
Welded feeder□
PE FEEDER□
SS feeder□
Welded feeder□
PE FEEDER□
SS feeder□
Welded feeder□
PE FEEDER□
SS feeder□
Welded feeder□
Piglet feeder optional optional optional optional
Slat system
666 constitution□
576 constitution□
477 constitution□
666 constitution□
576 constitution□
477 constitution□
666 constitution□
576 constitution□
477 constitution□
666 constitution□
576 constitution□
477 constitution□
Piglet heating
heating lamp□
piglet cabin□
heating nest□
heating pad□
heating lamp□
piglet cabin□
heating nest□
heating pad□
heating lamp□
piglet cabin□
heating nest□
heating pad□
heating lamp□
piglet cabin□
heating nest□
heating pad□
Feeding type
manual feeding□
Ad libitum□
auto feeding□
manual feeding□
Ad libitum□
auto feeding□
manual feeding□
Ad libitum□
auto feeding□
manual feeding□
Ad libitum□
auto feeding□
Drinking ways
sow: drinking bowl/
nipple drinker
piglet: drinking
bowl/ nipple drinker
sow: drinking bowl/
nipple drinker
piglet: drinking bowl/
nipple drinker
sow: drinking bowl/
nipple drinker
piglet: drinking bowl/
nipple drinker
sow: drinking bowl/
nipple drinker
piglet: drinking bowl/
nipple drinker
Surface
material Hot dip galv. Hot dip galv. Hot dip galv. Hot dip galv.
FARROWING PENS
Model (mm)
DIMENSIONS DESCRIPTION
(kg)
WEIGHT
PF01 2400*600*1000
90 Name: round tube non-adjustable
farrowing pen
Material:1”tube, 3/4”tube,1/2”tube
(mm)
DIMENSIONS DESCRIPTION
(kg)
WEIGHT
PF02 2400*600*1050
120 Name: round steel non-adjustable
farrowing pen
Material:φ20/ φ16/ φ12 round steel
(mm)
DIMENSIONS DESCRIPTION
(kg)
WEIGHT
PF11 2200*600*1100
87 Name: round tube adjustable
farrowing pen
Material: 1”tube,3/4”tube,1/2”tube
(mm)
DIMENSIONS DESCRIPTION
(kg)
WEIGHT
PF12 2400*650*1100
92 Name: round tube comprehensive
farrowing pen
Material:1”tube, 3/4”tube,1/2”tube
PIGLET PEN
CODING (mm)
DIMENSIONS DESCRIPTION
(kg)
WEIGHT
PB0061000A 500*30
3.7kg/m
PB0061000B 500*35 3.8kg/m Name: nursery pig PVC panel
Spec. : gray, straight rib, without
connection fitting
Wall δ: outer wall 2.0mm, inner rib 1.0mm PB0061000C 600*35 4.9 kg/m
Model (mm)
DIMENSIONS DESCRIPTION
(kg)
WEIGHT
B01 2400*1800*500
(600)
Name: all PVC panel
Spec.: 600*35/500*35/500*30(mm)
Model (mm)
DIMENSIONS DESCRIPTION
(kg)
WEIGHT
B02 2400*1800*500
(600)
Name: front grill
Spec.:600*35/500*35/500*30(mm)
Model (mm)
DIMENSIONS DESCRIPTION
(kg)
WEIGHT
B03 2400*1800*500
(600)
Name: half grill& half PVC panel
Spec.: 600*35/500*35/500*30(mm)
Model (mm)
DIMENSIONS DESCRIPTION
(kg)
WEIGHT
B04 2400*1800*500
(600)
Name: all grill
Spec.: frame 1/2” tube, grillφ10 round steel
SOW FEED TROUGH
CODING (mm)
DIMENSIONS DESCRIPTION
(kg)
WEIGHT
FH05040000 440*360*230 3.5
Name: sow feed trough
Material: black PE, δ=9mm
编码
CODING
尺寸(mm)
DIMENSIONS
产品描述
DESCRIPTION
重量(kg)
WEIGHT
FH0505000C 455*370*230
2.26 Name: sow feed trough
Material: SS 304, δ=1.0mm
CODING (mm)
DIMENSIONS DESCRIPTION
(kg)
WEIGHT
FH0501000A 403*330*435 6.4
FH0501000B 343*330*435 Name: sow feed trough Material: SS304, δ=1.5mm
5.9
CODING (mm)
DIMENSIONS DESCRIPTION
(kg)
WEIGHT
FH01040000 φ250
0.82 Name: piglet feed trough
Material: SS304, δ=1.2mm
FLOORING
CODING (mm)
DIMENSIONS DESCRIPTION
(kg)
WEIGHT
LZ0820114D 600*600
14 Name: 600*600 cast iron slat (with
manure cleaning opening)
Material: QT450
CODING (mm)
DIMENSIONS DESCRIPTION
(kg)
WEIGHT
LZ0420113D
15.7 Name: 700*600 cast iron slat
Material: QT450
CODING (mm) DESCRIPTION (kg)
DIMENSIONS WEIGHT
LZ0420114D 700*600
16.3 Name: 700*600 cast iron slat ( with
manure cleaning opening)
Material: QT450
CODING (mm)
DIMENSIONS DESCRIPTION
(kg)
WEIGHT
LZ08201010 600*600
600*600
2.36 Name:600*600 plastic slat
Material:PP
FLOORING
CODING (mm)
DIMENSIONS DESCRIPTION
(kg)
WEIGHT
LZ08201110 600*600
2.30 Name: 600*600 plastic slat
Material: PP
CODING (mm)
DIMENSIONS DESCRIPTION
(kg)
WEIGHT
LZ0820101A 600*600
2.74 Name: 600*600 solid plastic slat
Material: PP
CODING (mm)
DIMENSIONS DESCRIPTION
(kg)
WEIGHT
LZ0520112B 400*600
1.42 Name: 400*600 plastic slat
Material: PP
CODING (mm)
DIMENSIONS
DESCRIPTION
(kg)
WEIGHT
CODING
(mm)
DIMENSIONS DESCRIPTION
(kg)
WEIGHT
LZ0820113D 600*600
13.5 Name: 600*600 cast iron slat
Material: QT450
CODING (mm)
DIMENSIONS DESCRIPTION
(kg)
WEIGHT
LZ08201030 500*600
1.81 Name: 500*600 plastic slat
Material: PP
CODING (mm)
DIMENSIONS DESCRIPTION
(kg)
WEIGHT
LZ0420112B 700*600
2.58 Name: 700*600 plastic slat
Material: PP
CODING (mm)
DIMENSIONS DESCRIPTION
(kg)
WEIGHT
LZ0820103B 500*600
1.98 Name: 500*600 plastic slat
Material: PP
PB00570000 130*45*72
0.06 Name: slat beam support
Material: PP
CODING (mm)
DIMENSIONS DESCRIPTION
(kg)
WEIGHT
PB00620000 130*45*95
0.08 Name: slat beam support
Material: PP
CODING (mm)
DIMENSIONS DESCRIPTION
(kg)
WEIGHT
PF10340000 30*6*120
1.7kg/m Name: slat beam
Material: fiberglass
2400×1800 Slat Composition
PIGLETS HEATING
CODING (mm)
DIMENSIONS DESCRIPTION
(kg)
WEIGHT
PF10910000 φ250*320
0.245 Name: heating lamp shade
Material: PP material
Light transmitting, flame-resistant, wear-
resistant
CODING (mm) DESCRIPTION (kg)
DIMENSIONS WEIGHT
PF10970000
1308*655*511
6.73
PF1097000A
Name: triangular piglet nest
Material: 80%PE+20% fiberglass;
For H=500mm PVC panel
PF10980000
1308*655*611
6.87
PF1098000A
Name: triangular piglet nest
Material: 80%PE+20% fiberglass
For H=600mm PVC panel
CODING (mm)
DIMENSIONS DESCRIPTION
(kg)
WEIGHT
HF04000040
890*498
Single piglet heating panel
80W, line out from right 2.75
HF0400004A
Single piglet heating panel
(with temp sensor) 80W,
line out from right
2.8
HF04000050 Single piglet heating panel
80W, line out from left 2.75
HF04000060
1270*648
Dual piglet heating panel
160W 3.4
HF0400006A Dual piglet heating panel
(with temp sensor) 160W 3.45
CODING (mm)
DIMENSIONS DESCRIPTION
(kg)
WEIGHT
PF1181000A 1200*500*3 2.15
PF1181000B 1200*400*3 Name: PC piglet cabin
Material: transparent PC 1.75
GESTATION STALL
Model (mm)
DIMENSIONS DESCRIPTION
(kg)
WEIGHT
PM01
2200*650*1100
customized size
available
41 Name: PM01 Gestation Stall (incl. feed pipe)
Material: frame 3/4”pipe, grill 1/2” tube
Model (mm)
DIMENSIONS DESCRIPTION
(kg)
WEIGHT
PM02
2200*650*1100
customized size
available
60 Name: PM02 Gestation Stall (incl. feed pipe)
Material:φ2, φ16, φ14 round steel
Model (mm)
DIMENSIONS DESCRIPTION
(kg)
WEIGHT
PM05
2400*650*1100
customized size
available
52 Name: PM05 Gestation Stall (incl. feed pipe)
Material: frame1”pipe, grill 3/4” pipe
Model (mm)
DIMENSIONS DESCRIPTION
(kg)
WEIGHT
PM03
2200*650*1100
customized size
available
36 Name: PM03 Gestation Stall (incl. feed pipe)
Material: frame 3/4”pipe, grill 1/2” tube
Model (mm)
DIMENSIONS DESCRIPTION
(kg)
WEIGHT
PM04
2200*650*1100
customized size
available
55 Name: PM04 Gestation Stall (incl. feed pipe)
Material: 40 angle bar, φ18, φ12 round steel
THROUGH FEED TROUGH
CODING (mm)
DIMENSIONS DESCRIPTION
(kg)
WEIGHT
FH0601010X 100*150*310
6.7kg/m Name: N shape through feed trough
Material: SS 304 δ=1.5mm
CODING
(mm)
DIMENSIONS
DESCRIPTION
(kg)
WEIGHT
FH0602010X 100*150*310
8.3kg/m Name: M shape through feed trough
Material: SS 304 δ=1.5mm
CODING
(mm)
DIMENSIONS DESCRIPTION
(kg)
WEIGHT
FH0603010X 180*280*320 8.3kg/m
NURSERY PEN
Name: U shape through feed trough
Material SS 304 δ=1.5mm
CODING (mm)
DIMENSIONS DESCRIPTION
(kg)
WEIGHT
FH06000800 φ52mm
0.3 Name: bottom drainage plug
Material: SS 201+black oil-resistant
NBR rubber + cast copper piece
CODING (mm)
DIMENSIONS DESCRIPTION
(kg)
WEIGHT
FH06000800 φ90mm
0.2 Name: side drainage plug
Material: SS304+ silicon sealing ring
Model (mm)
DIMENSIONS DESCRIPTION
(kg)
WEIGHT
PB01
H=750/700
Customized
length and
width
Name: PB01 Nursery Pen
Spec.: 600*35PVC panel+ 1pc 35*35
square tube
Model (mm)
DIMENSIONS DESCRIPTION
(kg)
WEIGHT
PB02
H=750/700
Customized
length and
width
Name: PB02 Nursery Pen
Spec.: 500*35PVC panel+2 pcs 35*35
square tube
CODING (mm)
DIMENSIONS DESCRIPTION
(kg)
WEIGHT
PB00570000 130*45*72
0.06 Name: slat beam support
Material: PP
CODING (mm)
DIMENSIONS DESCRIPTION
(kg)
WEIGHT
PB00620000 130*45*95
0.08 Name: slat beam support
Material: PP
CODING (mm)
DIMENSIONS DESCRIPTION
(kg)
WEIGHT
PF10340000 30*6*120 1.7kg/m
Name: slat beam
Material: fiberglass
BIG PENS (ROUND STEEL SERIES)
BIG PEN MODEL BOTTOM FRAME GRILL TOP FRAME HEIGHT
(mm)
HEIGHT
ABOVE
FLOOR
(mm)
GRILL
NUMBER
Gilt pen φ20
φ12
round
steel
φ12
φ12
round
steel
40
40
angle bar 1000 100 9
Nursery
pen φ18
φ12
round
steel
φ12
φ12
round
steel
40
40
angle bar 700 50 7
Fattening
pen φ20
φ12
round
steel
φ12
φ12
round
steel
40
40
angle bar 900 50 8
Wean to
finish pen φ20
φ12
round
steel
φ12
φ12
round
steel
40
40
angle bar 900 50 8
Sow pen φ20
φ12
round
steel
φ12
φ12
round
steel
40
40
angle bar 1000 100 7
Boar pen φ20
φ12
round
steel
φ12
φ12
round
steel
40
40
angle bar 1200 100 7
DR
INK
ING
SY
ST
EM
ECO AUTOMATIC REGULATOR
Wamba Wishes: Each one of pigs gets stable and optimal drinking water flow without being influenced by water pressure.
ECO Automatic Regulator Parameters
Name Piglet Constant Flow Nipple Regular
Fattening Nipple Regulator Sow Nipple Regulator
Application Piglets, weaners and finishers Fattening ups, sows and boars Farrowing sows
Coding WZ0403010B WZ0403020B WZ0403030B
ECO Automatic Regulator (Nipple Drinker)
Features:
⚫ Significant reduction of water wastage ⚫ Less manure production
⚫ Better growth due to an optimal feed/water ratio ⚫ Water saving= costs saving
⚫ Less medicine usage
⚫ Pig farm water pressure range:0.6~6kg.
Water flow 0.5L/min 1.0L/min 2.5L/min
(mm)
Dimension 55*G1/2 63.5*G1/2 74*G1/2
(KG)
Weight 0.06 0.089 0.143
Water flow curve
REGULAR NIPPLE DRINKER
CODING (L/mm)
DIMENSIONS
DESCRIPTION (kg)
WEIGHT
WZ0403010A 55*G1/2
0.06 Piglet duckbill nipple drinker
CODING (L/mm)
DIMENSIONS
DESCRIPTION (kg)
WEIGHT
WZ0403020A 63.5*G1/2 育肥鸭嘴式饮水器
0.089 Fattening duckbill nipple drinker
CODING DIMENSIONS DESCRIPTION (kg)
WEIGHT
WZ04030300 74*G1/2
0.143 Farrowing sow duckbill nipple drinker
CODING DIMENSIONS DESCRIPTION (kg)
WEIGHT
WZ04070300 63.5*G1/2
0.077 Piglet water saving nipple drinker
CODING DIMENSIONS DESCRIPTION (kg)
WEIGHT
WZ04070200 79*G1/2
0.098 Fattening water saving nipple drinker
CODING )DIMENSIONS DESCRIPTION
(kg)
WEIGHT
WZ0407010A 115*G1/2
0.242 Sow water saving nipple drinker
CODING DIMENSIONS DESCRIPTION (kg)
WEIGHT
WZ0404010A 31*G1/2
0.060 Nipple drinker (associated with bowls)
CODING
DIMENSIONS DESCRIPTION WEIGHT
WZ0406010A 35*G1/2
0.067 Nipple drinker (associated with dry and
liquid feed trough)
CODING DIMENSIONS DESCRIPTION (kg)
WEIGHT
WZ0405010A 35.5*G1/2
0.090 Nipple drinker (associated with dry and liquid feeder)
DRINKING BOWLS
NO. CODING W(cm) H
(cm)
D
(cm)
(mm)
THICKNESS MATERIAL DESCRIPTION
1 WZ04010100 21 29 16 1.0 SUS304
For fattening pigs G1/2 inner screw
2 WZ04010200 19 27 11 1.0 SUS304 G1/2
For nursery pigs G1/2 inner screw
3 —— 15 21 9 1.0 SUS304
For farrowing piglets G1/2 inner screw
NO. CODING D(cm) H(cm) (mm)
THICKNESS MATERIAL DESCRIPTION
1 WZ04020400 20 19 1.0 SUS304 G1/2
For farrowing sows G12 inner screw
2 WZ04020300 16 15 1.0 SUS304 G1/2
For finishers G12 inner screw
3 WZ04020200 14 11 1.0 SUS304 G1/2
For nursery pigs G1/2 inner screw
4 WZ04020100 12 8 1.0 SUS304 G1/2
For farrowing piglets G1/2 inner screw
OTHERS
CODING DIMENSIONS DESCRIPTION (kg)
WEIGHT
WZ04080300 200x140
0.18
Water level controller, for auto controlling the
water level in water trough. Connected with 1/2”
round tube at the bottom of controller.
Applicable water pressure range: 0.05~0.25Mpa.
Applicable water flow range: 1.8~4.2L/min
CODING DIMENSIONS DESCRIPTION (kg)
WEIGHT
WZ0300010A
200x140
。
1.2
Medicator, for medicine adding. Medicine percentage can be adjusted as per requirement.
Specifications: D25RE5. Applicable pressure
range: 0.03~0.6Mpa. Water flow range
10~2500L/h, medicine percentage 1%~5%, 3/4 outer screw.
CODING DIMENSIONS DESCRIPTION (kg)
WEIGHT
—— 800*200
1.8
Drinker suspension support, for drinker
suspension and height adjusting as per pig body
height. Applied for nursery and fattening pig
water drinking. Top 1/2 outer screw, bottom 1/2
inner screw.
CODING DIMENSIONS DESCRIPTION (kg)
WEIGHT
—— 800*200
2
Adjustable drinker support, applied for nursery
and fattening pig water drinking. Drinker height can be adjusted as per pig body height. Top 1/2
outer screw, bottom 1/2 inner screw.
DR
AIN
AG
E S
YS
TE
M
DRY AND WET MANURE CLEANING MACHINE
NO. MANURE
GUTTER WIDTH W L H
/KG
WEIGHT
1 1.0 950 1190 305 48.5
2 1.1 1050 1190 310 49
3 1.2 1150 1190 315 50.5
4 1.3 1250 1190 320 52.3
5 1.4 1350 1190 325 54.1
6 1.5 1450 1190 330 56
7 1.6 1550 1190 335 57.8
8 1.7 1650 1190 340 59.6
9 1.8 1750 1190 345 61.5
10 1.9 1850 1190 350 63.3
11 2.0 1950 1190 355 65.1
12 2.1 2050 1190 360 67
13 2.2 2150 1190 365 69.8
14 2.3 2250 1190 370 72.6
15 2.4 2350 1190 375 75.4
16 2.5 2450 1190 380 78.2
17 2.6 2550 1190 385 81
CODING
DIMENSIONS DESCRIPTION (kg)
WEIGHT
SA11000000 475*475*135
17.9 Corner, for steel wire direction turning
CODING DIMENSIONS DESCRIPTION (kg)
WEIGHT
SA10000000 680*380*355 。
95 Manure cleaning driver, 0.75kw.
CODING DIMENSIONS DESCRIPTION (kg)
WEIGHT
SA09010000 6000*150*115
13.8 Urine draining tube, 6m/ unit. This tube
can collect liquid and drain it out.
CODING DIMENSIONS DESCRIPTION (kg)
WEIGHT
SA09020000 6000*190*105
9.36 Urine drainage tube support, 6m/ unit. It
needs to be cut into 10cm/unit for installation.
CODING DIMENSIONS DESCRIPTION (kg)
WEIGHT
SA09030000 6000*19*15
0.5 Urine drainage tube sealing bar, 6m/ unit.
For cover the opening of drainage tube. It is taken off after the manure gutter hardened.
CODING DIMENSIONS DESCRIPTION (kg)
WEIGHT
SA09040000 6000*28*11
0.97 Urine drainage tube connecting bar, 6m/
unit, used for drainage tube connection and keep the tubing line straight. It need to be
cut into 20cm/ unit for installation.
DRAINAGE TUBING PARTS
CODING
DESCRIPTION (kg)
WEIGHT
SA0602000D Φ200
1.5 Φ200 saddle shape manure drainage piece,
installed to Φ200 drainage tube
SA0602000B Φ250
3.2 Φ250 saddle manure drainage piece, installed to Φ250 drainage tube
CODING DIMENSIONS DESCRIPTION (kg)
WEIGHT
SA0601000D Φ200
1.5 Φ200 drainage plug , for Φ200 drainage
hole sealing
SA0601000A Φ250
3.2 Φ200 drainage plug , for Φ200 drainage
hole sealing
CODING DIMENSIONS DESCRIPTION (kg)
WEIGHT
Φ200
1.4 Φ200 extended piece, directly connected to
Φ200 tee
Φ250
2.2 Φ200 extended piece, directly connected to Φ200 tee
CODING DIMENSIONS DESCRIPTION (kg)
WEIGHT
SA0603000A 250*250 1.0
CODING DIMENSIONS DESCRIPTION (kg)
WEIGHT
GSGA00056B Φ200*6000
23.3 Φ200PVC drainage tube δ=4.9mm ,
0.63MPa 6m/ unit
GSGA00015B Φ250*6000
32.7 Φ250PVC drainage tube δ=6.2mm ,
0.63MPa 6m/ unit
Φ110 air drainage valve, for drainage tube
air draining, connecting with Φ110 tube
HE
AT
ING
SY
ST
EM
RADIATOR
Coding
DIMENSIONS DESCRIPTION (kg)
WEIGHT
HL01010000 120*6000
6 Double wing tube
Aluminum material, radiating power 160~180W/m.
Medium: water
Coding
DIMENSIONS DESCRIPTION (kg)
WEIGHT
HL02000010 120*6000
6 Triple wing tube:
Aluminum material, radiating power 160~180W/m.
Medium: water
Coding DIMENSIONS DESCRIPTION
(kg)
WEIGHT
HL04010000 Φ92*6000
34 Finned tube:
Hot galvanized carbon steel, radiating power 500~600W/m.
Medium: water
CL
EA
NIN
G &
DIS
INF
EC
TIO
N S
YS
TE
MS
MOVABLE COLD-WATER HIGH-PRESSURE CLEANER
German Kärcher—World Leading Cleaning Brand
Cold water cleaner: compact model, HDS 16/5C.
This cold water high-pressure cleaner is used in construction, agricultural and forestry sectors, as well
as industry and municipal facility’s. It’s famous for nice quality, compact structure, outstanding mobility
and easy operation.
Technical data
PH/ Type of current Ph/v/Hz 1/230/50
Flow rate L/h 230-560
Operation pressure bar /Mpa 30-150/3-15
Max. pressure bar /Mpa 190/19
Connection power kw 3.1
Weight kg 23
Dimensions mm 360x375x925
German Kärcher—World Leading Cleaning Brand
Hot water cleaner: HDS 12/14-4 ST Gas
This model boasts of superior safety, and is with
pressure venting valve, gas temp monitoring, water
tank dry-turning prevention device, and pressure
resistant SDS soft tube. This is associated with Eco-
Line broiler, and the whole set conforms to the latest
Bim Sch Emission Standard.
MOVABLE HOT WATER HIGH-PRESSURE CLEANER
Technical data
PH/ Type of current Ph/v/Hz 3/400/50
Flow rate L/h 600-1300
Operation pressure bar /Mpa 30-200/3-20
Max. temperature ℃ 80-155
Connection power kw 9,3
Fuel consumption rate kg/h 8,3
Detergent tank L 25
Weight kg 186
Dimensions mm 1330x750x1060
Detergent tank L 20-10
FIXED HOT WATER HIGH-PRESSURE CLEANED/ GAS
German Kärcher—World Leading Cleaning Brand
Hot water cleaner: super model, HDS 13/20-4 S
This model is superior for its new function---ECO
mode. When the cleaner is set in ECO mode, it can
work automatically under most temperature levels. It
will also save costs and protect the environment.
Technical data
PH/ Type of current Ph/v/Hz 3/400/50
Flow rate L/h 600-1200
Operation pressure bar /Mpa 30-140/3-14
Max. temperature ℃ 98
Connection power kw 7.5
Gas consumption rate m³/h 8.9
Weight kg 170
Dimensions mm 1110x565x1080
FIXED HOT WATER HIGH-PRESSURE CLEANER/ OIL
Technical data
PH/ Type of current Ph/v/Hz 3/400/50
Flow rate L/h 500-930
Operation pressure bar /Mpa 30-140/3-14
Max. temperature ℃ 155-80
Connection power kw 6.4
Fuel consumption rate kg/h 5.8
Weight kg 140
Dimensions mm 1110x565x690
German Kärcher—World Leading Cleaning Brand
Hot water cleaner: HDS 9/14-4 ST
This model boasts of superior safety, and is with
pressure venting valve, gas temp monitoring, water
tank dry-turning prevention device, and pressure
resistant SDS soft tube. This is associated with Eco-
Line broiler, and the whole set conforms to the latest
Bim Sch Emission Standard.