wall thickness -20 to 300f

PRODUCTION APPLICATIONS QUALITY ASSURANCE INSPECTION FOR TESTING AND DOCUMENTATION COMPLIANCE SCOPE: SURFACE EQUIPMENT USED DURING FLOWBACK OF WELL EFFLUENTS REVISION 4 APPROVED BY: DATE: JULY, 2002 GLOBAL COORDINATOR - ASSETS MINIMUM WALL THICKNESS A106 GRADE C STEEL -20°F to +300°F Page 1 of 1 _______________________________________________________________________________________________________________________________ _______ A106 GRADE C MINIMUM WALL THICKNESSES PER ASME/ANSI B31.3¨ 1/16" CORROSION ALLOWANCE; E=1.0 SMTS=70,000 (PSI); SMYS=40,000 (PSI); BASIC ALLOWABLE STRESS = 23,300 (PSI) -20° F TO +300° F METAL TEMPERATURE RANGE NOMINAL PIPE SIZE (IN.) OUTSIDE DIAMETER (IN.) MAXIMUM ALLOWABLE WORKING PRESSURE (PSI) 285 740 1440 2000 3000 4000 5000 6000 7500 10000 15000 2000 0 MINIMUM WALL THICKNESS (IN.) 1 1.315 0.071 0.083 0.102 0.117 0.143 0.168 0.192 0.216 0.249 0.331 0.615 - 1.5 1.900 0.074 0.092 0.120 0.141 0.179 0.215 0.250 0.284 0.332 0.450 0.860 - 2 2.375 0.077 0.100 0.134 0.161 0.208 0.253 0.297 0.340 0.400 0.547 1.060 - 2.5 2.875 0.080 0.108 0.149 0.182 0.239 0.293 0.347 0.398 0.472 0.649 1.269 - 3 3.500 0.084 0.117 0.168 0.208 0.277 0.344 0.408 0.471 0.562 0.776 1.532 - 4 4.500 0.090 0.133 0.198 0.249 0.338 0.424 0.507 0.588 0.704 0.980 1.952 - 6 6.625 0.103 0.166 0.262 0.337 0.468 0.595 0.717 0.836 1.007 1.414 2.844 - 8 8.625 0.115 0.198 0.323 0.420 0.591 0.755 0.915 1.069 1.292 1.822 3.683 - 10 10.75 0.128 0.231 0.387 0.509 0.721 0.926 1.125 1.317 1.595 2.255 4.575 - 12 12.75 0.140 0.262 0.447 0.592 0.843 1.087 1.322 1.551 1.880 2.663 5.415 - 14 14.00 0.148 0.282 0.485 0.643 0.920 1.187 1.446 1.697 2.059 2.918 5.940 - 16 16.00 0.160 0.313 0.545 0.726 1.042 1.348 1.644 1.930 2.344 3.326 6.779 - 18 18.00 0.172 0.345 0.605 0.809 1.165 1.508 1.841 2.164 2.629 3.734 7.619 - 20 20.00 0.184 0.376 0.666 0.892 1.287 1.669 2.039 2.397 2.914 4.142 8.459 - 22 22.00 0.196 0.407 0.726 0.975 1.409 1.830 2.236 2.631 3.199 4.550 9.298 - 24 24.00 0.209 0.439 0.786 1.058 1.532 1.990 2.434 2.864 3.485 4.958 10.138 - Once printed this document becomes uncontrolled, refer to Production Applications web site for controlled copy.

Upload: hosammohamed

Post on 16-Dec-2015

215 views

Category:

Documents

0 download

Report

Download

Embed Size (px):

TRANSCRIPT

A106C

PRODUCTION APPLICATIONS

QUALITY ASSURANCE INSPECTIONFOR TESTING AND DOCUMENTATION COMPLIANCE

SCOPE:SURFACE EQUIPMENT USED DURING FLOWBACK OF WELL EFFLUENTS

REVISION 4APPROVED BY:

DATE: JULY, 2002GLOBAL COORDINATOR - ASSETS

MINIMUM WALL THICKNESS A106 GRADE C STEEL -20F to +300FPage 1 of 1______________________________________________________________________________________________________________________________________

A106 GRADE C

MINIMUM WALL THICKNESSES PER ASME/ANSI B31.3SYMBOL 168 \f "Symbol"1/16" CORROSION ALLOWANCE; E=1.0

SMTS=70,000 (PSI); SMYS=40,000 (PSI); BASIC ALLOWABLE STRESS = 23,300 (PSI)

-20SYMBOL 176 \f "Symbol" F TO +300SYMBOL 176 \f "Symbol" F METAL TEMPERATURE RANGE

NOMINAL

PIPE

SIZE

(IN.)OUTSIDE

DIAMETER

(IN.)MAXIMUM ALLOWABLE WORKING PRESSURE (PSI)

2857401440200030004000500060007500100001500020000

MINIMUM WALL THICKNESS (IN.)