wal-mart stores, inc. store no. 3178 05/25/2012 project ... · pdf filewal-mart stores, inc....

WAL-MART STORES, INC. STORE NO. 3178 05/25/2012PROJECT: GRESHAM (E), OR ADD #1PROJECT NO. 1022222

of 7

NOTE: The General Contractor shall obtain approval of the Owner Construction Manager before beginning the Work defined in this Addendum. If applicable, adjustment to the Contract Sum may be based only on the method described in 7.3.3.1 of the Contract. SCOPE: The scope of this Addendum is to revise the originally issued contract documents of Gresham, OR dated 01/17/12, and all subsequent contract modifications, to reflect the following: SUMMARY: Oregon Recycling Program, Update Pad Prep due to revised Geotech report, Peer Review Response, Further clarify installation of cases, Revise Drawings per OEM Submittals, Add Signage sheet to set, ISD Design Guide Update, Senior QC Comments, Electric Utility Updates, Telephone Service Coordination with Civil, OTB Civil Coordination 901.05: Oregon Recycling Program (901.05) 901.06: Update Pad Prep due to revised Geotech report Fixed Fee: Peer Review Response (PR) Fixed Fee: Add Fixture Anchor Drawings to Set (FXS) Fixed Fee: Further clarify installation of cases (CS) Fixed Fee: Revise Drawings per OEM Submittals (OEM) Fixed Fee: Add Signage sheet to set (SN) Fixed Fee: ISD Design Guide Update (CI) Fixed Fee: Internal mechanical and electrical updates (EM) Fixed Fee: Electric Utility Updates (EU) Fixed Fee: Telephone Service Coordination with Civil (TS) Fixed Fee: OTB Civil Coordinaton (Civil) Fixed Fee: Miscellaneous Quality Control (QC). ARCHITECTURAL SHEET C1 – COVER SHEET SHEET INDEX 1. Add Racking Structural sheets FXS1, FXS2 and FXS3. (FXS) 2. Add Signage sheet A2.2. (SN) PROFESSIONAL OF RECORD INFORMATION 1. Add Racking Structural professional of record information. (FXS) SHEET D1 – DEMOLITION PLAN DETAIL 1 – DEMOLITION PLAN 1. Revise demolition keynotes. (PR) 2. Revise area of slab to be removed and provided dimensions (Civil) DEMOLITION KEYNOTES 1. Revise keynote D004 and D35. (PR) SHEET D2 – MEZZANINE DEMOLITION PLAN DETAIL 1 – MEZZANINE DEMOLITION PLAN 1. Remove keynote D28. (PR) SHEET SP1 – SITE PLAN DETAIL 1 – SITE PLAN 1. Revise all existing handicap ramps to include stamped concrete combined with truncated dome as

detectable warning. (Civil) 2. Relocate transformer to coordinate with Civil. (Civil)


of 7

DETAIL 4 – CURB RAMP 1. Revise handicap ramps to include stamped concrete combined with truncated dome as detectable

warning. (PR) SHEET A1 – FLOOR PLAN DETAIL 1 – FLOOR PLAN Provide dimensions at Sprinkler Room #159. (PR) SHEET A1.1 – GROCERY FIXTURE PLAN DETAIL1 – FIXTURE PLAN 1. Add recycling bins and associated callouts. (901.05) 2. Provide dimensions to refrigeration cases to the right of the cart storage, and the cases to the left of

Dairy Cooler. (PR) 3. Freeze roof top equipment on plan. (PR) SS EQUIPMENT LEGEND 1. Revise quantity of SS004 hand sink to 1. (PR) SHEET NOTES 1. Provide note 4 to further clarify installation method for potentially oversized equipment. (CS) ABBREVIATION KEY 1. Add “CAN”, “GLASS”, and “PET” per recycling center addition. (901.05) SHEET A1.2 – FLOOR FINISH PLAN DETAIL 2 – TRANSITION STRIP AT VCT FLOORING 1. Clarify location of the start of transition strip. (PR) SHEET NOTES 1. Remove integral color direction in note #1. (PR) SHEET A2 – EXTERIOR ELEVATIONS DETAIL 2 – SIDE ELEVATION 1. Remove “existing” indication from keynote 8.01. (PR) KEYNOTES 1. Remove detail reference from keynote 7.19. (PR) SHEET A2.1 – EXTERIOR DETAILS DETAIL 9 – INTERIOR VESTIBULE ELEVATION 1. Revise notes to existing chair rail and base. (PR) 2. Deleted keynote B6. (PR) DETAIL 10 – INTERIOR VESTIBULE ELEVATION 1. Revise notes to existing chair rail and base. (PR) 2. Deleted keynote B6. (PR) DETAIL 11 – INTERIOR VESTIBULE ELEVATION 1. Revise notes to existing chair rail and base. (PR) 2. Deleted keynote B6. (PR) SHEET A2.2 – EXTERIOR SIGNAGE AND MISC DETAILS 1. Add entire sheet. (SN)


of 7

SHEET A4 – ROOF PLAN DETAIL 1 – ROOF PLAN 1. Revise note to point at roof hatch only. (PR) SHEET A5 – ENLARGED PLANS DETAIL 2 – ENLARGED FLOOR PLAN 1. Revise location of equipment to coordinate with changes called out in mechanical refrigeration

drawings. (OEM) 2. Revise wall A to type C6. (PR) SHEET A5.1 – ENLARGED PLANS DETAIL 2 – ENLARGED CUSTOMER SERVICE/OFFICE PLAN 1. Extend enlarged plans to include the Sprinkler Room 159, provide dimensions and wall types for the

new extended wall. (PR) 2. Provide wall types to wall D in rooms 110 Storage, 102 Cash, and 101 Customer Service. (PR) 3. Provide keynote 6.11 and finish note PL21 to wall D at the 101 Customer Service. (PR) DETAIL 3 – ENLARGED BREAK ROOM/ OFFICES /UPC PLAN 1. Revise wall finish. (PR) 2. Revise associated notes. (PR) 3. Provide dimensions for millwork. (PR) DETAIL 4 – PRIVACY WALL 1. Revise concrete curb reference on Section A. (PR) 2. Revise wall height to match plan on the elevation. (PR) SHEET A5.2 – ENLARGED TOILET PLANS DETAIL 1 – ENLARGED RESTROOM PLAN 1. Provide wall section cuts throughout entire plan. (PR) 2. Revise and add notes throughout entire plan. (PR) SHEET A6 – INTERIOR ELEVATIONS DETAIL 1 – FRONT WALL ELEVATION 1. Correct finishes and keynote graphics. (PR) SHEET A7 – ROOM FINISH SCHEDULES AND DETAILS ROOM FINISH SCHEDULE 1. Room 106 “UPC”: Revise floor finish to EC. (PR) 2. Room 111 “Alcove”: Added base, material and finish to wall “B” (PR) 3. Room 117 “Cart Storage”: Revise wall “A” to be CMU and revise paint inside the Cart storage to be

P113 (PR) 4. Room 120 “Receiving”: Revise base material on wall “A”, finish on wall “B”, base, material and finish

on wall “C” and “D. (PR) 5. Room 126 “Closet”: Revise ceiling height to be “ETR” and deleted note 2. (PR) 6. Room 999 “Refrigeration”: Deleted NRP1 from wall “D” material. (PR) SCHEDULE NOTES 1. Revise schedule note 8 (PR) SHEET A8 – DOOR SCHEDULE AND DETAILS DOOR AND FRAME SCHEDULE 1. Revise notes, colors and/or frame types for doors 100A, 100C, 109B, 120A, 120B, 120F, 121A, 121B,

122A, 125B, 126A, 159A. (PR) SHEET A9 – MISC DETAILS


of 7

DETAIL 11 – ENLARGED DETAIL AT PLASTIC TRANSITION STRIP 1. Add detail. (PR) SHEET A9.2 – MILLWORK DETAIL 14 – CABINET ELEVATION 2. Remove filler and associated note from wall. (PR) STRUCTURAL SHEET SO – GENERAL STRUCTURAL INFORMATION FOUNDATION SUBSURFACE PREPARATION 1. Revise Foundation Subsurface Preparation note per revisions to the note in the Final Geotechnical

Report. (901.06) GENERAL NOTES 1. Revise note 2.1 to update the date of the Soils Report per new date on the Final Geotechnical

Report. (901.06) SHEET S1 – FOUNDATION/SLAB PLAN PLAN NOTES 1. Add note to indicate existing under-slab HVAC system to be filled. (Civil) DETAIL 1 – FOUNDATION/SLAB PLAN 1. Revise extents of slab demo to cover under-slab HVAC system. (Civil) 2. Add note to indicate approximate location of existing under-slab HVAC system. (Civil) 3. Add reference to note #7 for under-slab HVAC system. (Civil) MECHANICAL SHEET P1 – DWV PLAN DETAIL 1 – DWV PLAN 1. Add pipe sizes to sanitary lines per peer review comments. (PR) SHEET P2 – ENLARGED DWV PLANS DETAIL 1 – BAKERY/PRODUCE PREP DWV PLAN 1. Revise sink callout per peer review comments. (PR) SHEET P3 – WATER PLAN DETAIL 1 – WATER PLAN 1. Add pipe size to plan per peer review comments. (PR) 2. Revise routing of cold water piping for cost savings. (EM) SHEET P4 – PLUMBING RISERS AND DETAILS DETAIL 1 – DWV RISER 1. Revise riser to match plan. (PR) DETAIL 5 – WATER RISER 1. Revise riser to match plan. (PR) SHEET P5 – PLUMBING SCHEDULES GROCERY HEAT RECLAIM SCHEDULE 1. Revise hot water heater to sealed combustion model. (EM)


of 7

SHEET M1 – HVAC PLAN AND DETAILS DETAIL 1 – HVAC PLAN 1. Revise hot water heater to electric. (EM) 2. Revise HVAC and add zone damper and Temp. Control in AP office. (EM) SHEET M2 – ENLARGED HVAC PLANS AND DETAILS DETAIL 3 – RESTROOM/OFFICE/PHARMACY HVAC PLAN 1. Revise supply and return CFMs for RTU1. (PR) DETAIL 5 – DELI/BAKERY/PRODUCE PREP HVAC PLAN 1. Revise location of make up air duct. (EM) DETAIL 6 – BREAKROOM/UPC/OFFICES HVAC PLAN 1. Revise duct in UPC room. (EM) SHEET REM1 – REFRIG ENERGY MANAGEMENT PLAN DETAIL 1 – REFRIGERATION ENERGY MANAGEMENT PLAN 1. Revise refrigeration room layout per OEM submittals. (OEM) SHEET R1 – REFRIG PLAN DETAIL 1 – REFRIGERATION PLAN 1. Revise refrigeration room layout per OEM submittals. (OEM) DETAIL 2 – CONDENSER ROOF PLAN 1. Revise refrigeration room layout per OEM submittals. (OEM) SHEET R5 – REFRIG SUBMITTAL 1. Add OEM submittals. (OEM) ELECTRICAL SHEET ED1 – ELECTRICAL DEMOLITION PLAN DETAIL 1 – ELECTRICAL DEMOLITION PLAN 1. Add note about existing to remain power and phone. (TS) SHEET E1.1 – ENLARGED LIGHTING PLANS DETAIL 1 – PHARMACY/CUSTOMER SERVICE LIGHTING PLAN 1. Add installation height to Riser Room light fixture. (PR) SHEET E2 – POWER PLAN DETAIL 1 – POWER PLAN 1. Add telephone conduit routing information. (TS) SHEET E2.1 – ENLARGED POWER PLANS KEYNOTES 1. Revise keynote to remove cable tray wording. (PR) DETAIL 1 – PHARMACY/CUSTOMER SERVICE POWER PLAN 1. Delete wall switches for air curtains. (EM) DETAIL 2 – VESTIBULE POWER PLAN 1. Add devices and related circuitry for recycling containers. (901.05) 2. Revise location of HC cart receptacle. (PR)


of 7

DETAIL 3 – REAR OFFICE/BREAKROOM POWER PLAN 1. Add quantity call-out to detail. (PR) SHEET E2.2 – ENLARGED POWER PLANS DETAIL 3 – PRODUCE/MECH/ELEC POWER PLAN 1. Revise electrical switchgear layout per Utility coordination. (EU) 2. Add installation information for telephone conduit. (TS) 3. Add devices and related circuitry for irrigation controller. (PR) SHEET E3 – ELECTRICAL DETAILS, SYMBOLS, AND SCHEDULES DETAIL 7 – TELEPHONE BACKBOARD 1. Revise conduit entrance to top of board. (TS) SHEET E4 – ONE-LINE DIAGRAM, DETAILS, AND SCHEDULES PANELBOARD MSB 1. Circuit #4 – Add Utility Metering Section to switchgear per Utility coordination. (EU) DETAIL 1 – ONE-LINE DIAGRAM 1. Revise electrical switchgear layout per Utility coordination. (EU) 2. Revise available fault current per Utility coordination. (EU) DETAIL 5 – UTILITY COORDINATION 1. Update detail per Utility coordination. (EU) SHEET E4.1 – PANELBOARD SCHEDULES PANELBOARD H1A 1. Circuit #1 – Revise breaker to 20 Amp. (PR) PANELBOARD L1D1 1. Circuit #73 – Revise description to “Irrigation Control” and add 20A/1P breaker. (PR) PANELBOARD L1D2 1. Circuits #36, 38, & 40 – Revise wire size to #12. (PR) 2. Circuits #67, 73, & 80 – Revise description to “Recycling Machine” and add 20A/3P breaker. (901.05) SHEET E4.2 – PANELBOARD SCHEDULES PANELBOARD HRD 1. Circuit #5 – Revise description to “Space.” (EM) 2. Circuit #7 – Revise description to “Water Heater” and breaker to 70A/3P. (EM) 3. Circuit #8 – Revise breaker to 175 Amp. (OEM) 4. Circuit #14 – Revise breaker to 70 Amp. (OEM) RACKING STRUCTURAL SHEET FXS1 – RACK AND SHELVING ANCHORAGE PLAN AND GENERAL NOTES 1. Add entire sheet. (FXS) SHEET FXS2 – RACK AND SHELVING ANCHORAGE DETAILS 1. Add entire sheet. (FXS) SHEET FXS3 – RACK AND SHELVING FRAMING DETAILS 1. Add entire sheet. (FXS)


of 7

SPECIFICATIONS SECTION 00007 – SEALS PAGE 1. Include with Specifications. SECTION 08710 – DOOR HARDWARE 1. Revise Hardware Sets 109B, 115A, 115B, 116A, 116B, 120A. (QC) END OF CHANGE

REV #3 – 04/27/12, REV #4 – 05/09/12, ADD #1 – 05/25/12

00007-1

Gresham (East), OR #3178 1022222 January 17, 2012 ADD #1 – 05/25/12

UniSpec II 123010

3 4 1 DOCUMENT 00007 - SEALS PAGE

PROJECT: Name: Owner Location: Gresham (East), OR Project Number: 1022222 Store Number: 3178 ARCHITECT OF RECORD

Daryl L. Bray SGA Architecture, P.C.

1437 South Boulder Suite 550

Tulsa, OK 74119 Section 08710 Architect of Record Date CIVIL ENGINEERING CONSULTANT OF RECORD Refer to Civil Engineering Consultant Sections (Printed on Yellow Paper) Table of Contents for seal and signature of Civil Engineering Consultant of Record.

ADD #1 – 05/25/12

08710-1


UniSpec II - Base 102811

SECTION 08710 (08 7100) - DOOR HARDWARE

PART 1 - GENERAL

1.1 SUMMARY

A. Section Includes: 1. Hardware for doors. 2. Thresholds. 3. Weatherstripping, seals and door gaskets.

B. Related Requrements: 1. Section 01640 - Owner Furnished Products: Provisions for Owner Furnished Items. 2. Section 06100 - Rough Carpentry: Blocking for miscellaneous hardware mounting. 3. Section 06200 - Finish Carpentry: Hardware for cabinetry and other finish carpentry. 4. Section 08110 - Steel Doors and Frames: Hardware coordination. 5. Section 08411 - Aluminum Framed Storefronts: Hardware coordination. 6. Section 08462 - Automatic Sliding Entrance Doors: Hardware coordination. 7. Section 16100 - Wiring Methods: Electrified hardware coordination.

1.2 REFERENCES

A. The publications listed below form a part of this specification to the extent referenced. Publications are referenced within the text by the basic designation only.

B. Americans with Disabilities Act (ADA): 1. 28 CFR Part 36 - ADA Standards for Accessible Design.

C. American National Standards Institute (ANSI): 1. ANSI A 117.1 - Specifications for Making Buildings and Facilities Accessible to and Usable by Physically

Handicapped People. 2. ANSI A 156.2 - Bored and Preassembled Locks and Latches. 3. ANSI A 156.6 - Architectural Door Trim. 4. ANSI A 156.13 - Mortise Locks and Latches. 5. ANSI A 156.15 - Release Devices – Closer Holder, Electromagnetic and Electromechanical.

D. National Fire Protection Association (NFPA): 1. NFPA 80 - Fire Doors and Windows. 2. NFPA 101 - Code for Safety to Life from Fire in Buildings and Structures. 3. NFPA 252 - Fire Tests of Door Assemblies.

E. Underwriters Laboratories (UL): 1. UL 10B - Fire Tests of Door Assemblies. 2. UL 305 - Panic Hardware.

1.3 SUBMITTALS

A. Comply with the requirements of Section 01330.

ADD #1 – 05/25/12

08710-2


1.4 DELIVERY, STORAGE AND HANDLING

A. Transport, handle, store, and protect door hardware products in compliance with the requirements of Section 01600 and manufacturer's recommendations.

B. Product Delivery: Owner’s Supplier will deliver products to Site ready for installation. Contact Owner’s Supplier to establish product delivery and installation date and coordination procedure.

C. Product Packaging: Products will be shipped in manufacturer's standard packaging with identification markings on each component or package.

D. Acceptance at Site: Receive products as specified in Section 01640. 1. Verify quantity of products furnished with Bills of Lading provided with products. 2. Report discrepancies in product quantity or quality, or damage or damage to products to Owner’s

Construction Manager immediately. Note description of product quality discrepancies and/or product damage on Bill of Lading.

3. Upon notification, Owner will arrange for delivery of replacement products.

E. Store products in unopened packages in protected dry area to prevent damage from environmental and construction operations.

PART 2 - PRODUCTS

2.1 OWNER FURNISHED PRODUCTS

A. Owner's or Owner’s Supplier will furnish hardware specified herein under provisions of Section 01640 for installation by Contractor.

B. Descriptions and related provisions of products by Supplier as specified herein are included as requirements by the supplier of equipment to be furnished by the Owner and are included as information only to Contractor.

2.2 MANUFACTURERS

A. Provide hardware as scheduled in Hardware Schedule in Part 3 of this Section.

B. Owner’s Supplier: 1. Positive Lock Exit Device (Owner Furnished): Positive Lock, Contact: Kimbra White (800) 342-7670. 2. All Other Hardware Items (Owner Furnished): D.H. Pace Inc., Springfield, MO, Mark Lyons,

(417) 831-5585, [email protected].

C. Product Designations: Hardware may be any of the products listed within the tables below for each specific type. Substitutions will not be permitted.

D. Hardware Manufacturer Designations:

ID Manufacturer Telephone ID Manufacturer Telephone Ar Arrow (ASSA ABLOY) (800) 233-0478 Re Reese Enterprises, Inc. (800) 328-0953 De Detex Corporation (800) 729-3839 Ri Rixson (ASSA ABLOY) (800) 457-5670 GJ Glynn-Johnson (Ingersoll Rand

Security Technologies (IR) (800) 525-0336 Ro Rockwood (ASSA ABLOY) (814) 926-2026

http://www.positivelock.com/

mailto:[email protected]

http://www.arrowlock.com/

http://www.reeseusa.com/

http://www.detex.com/

http://www.rixson.com/

http://www.glynn-johnson.com/

http://www.rockwoodmfg.com/

ADD #1 – 05/25/12

08710-3


ID Manufacturer Telephone ID Manufacturer Telephone H Hager Companies (800) 325-9995 Sc Schlage (IR) (800) 847-1864 I H. B. Ives (IR) (877) 613-8766 Sec Securitron (ASSA ABLOY) LCN LCN Closers (IR) (800) 526-2400 Sel Select Hinges (800) 423-1174 Mc McKinney (ASSA ABLOY) (717) 346-7551 S Stanley Hardware (800) 622-4393 NG National Guard Products, Inc. (800) 647-7874 T Trimco (Triangle Brass Mfg) (800) 637-8746 P Pemko Mfg. Co. (805) 642-2600 VD Von Duprin (IR) (800) 999-0408 Po Positive Lock (800) 342-7670

2.3 REGULATORY REQUIREMENTS

A. Perform work in accordance with the following standards: 1. ANSI A117.1 2. NFPA 101. 3. NFPA 80. 4. NFPA 252. 5. UL 10B. 6. UL 305.

B. Conform to applicable code for requirements applicable to fire rated doors and frames.

C. Products Requiring Electrical Connection: Listed and classified by Underwriters Laboratories, Inc. (UL), and acceptable to Authority Having Jurisdiction as suitable for the purpose specified and indicated.

D. Conform to applicable local, State or Federal disabled access requirements for the installation and operation of door hardware.

2.4 FINISHES

A. Provide finishes as specified in Part 2 of this Section unless otherwise indicated in the Hardware Schedule for the specific hardware item.

2.5 HINGES

A. Material: 1. Mortise Butts: Provide full mortise-type hinges with stainless steel pins, except steel pins with steel hinges;

non-removable pin (NRP) for exterior and public interior exposure, non-rising pin, flat button with matching plugs, 4-1/2 inches x 4-1/2 inches unless otherwise shown.

2. Ball-bearing Type Hinges: Swaged, inner leaf beveled, square corners. 3. Continuous Geared Hinge: Full surface type hinge of 6063 T6 Aluminum with thermoplastic polyester

bearings, 90 min. fire rated, clear finish. Provide self drilling threaded fasteners for frame and thru bolts for door.

B. Hinges by types: Type Description Finish MANUFACTURER/MODEL Stanley Hager McKinney H-2 Butts: Medium weight door, low frequency,

steel 652 F179 1279 T2714

H-4 Butts: Medium weight door, average frequency, steel

652 FBB179 BB1279 TB2714

Select Hinge Hager

http://www.hagerhinge.com/

http://www.schlage.com/

http://www.ives.ingersollrand.com/

http://www.lcnclosers.com/

http://www.select-hinges.com/

http://www.mckinneyhinge.com/index.html

http://www.stanleyhardware.com/

http://www.ngpinc.com/

http://www.trimcobbw.com/

http://www.pemko.com/

http://www.vonduprin.com/

http://www.positivelock.com/

ADD #1 – 05/25/12

08710-4


Type Description Finish MANUFACTURER/MODEL Stanley Hager McKinney H-7 Hinge: Continuous geared hinge CL SL21 SD x

SDTF x FDH

Roton 780-210

Stanley Hager McKinney H-8 Hinge: Surface mounted 3 inches x 3 inches US2H 808BP 1808 705 H-9 Butts: Heavy weight, stainless steel 630 FBB199 BB1199 T4B3386 H-11 Butts: Medium weight, stainless steel 630 FBB191 BB1191 TB3386

2.6 LOCKS, LATCHES, AND BOLTS

A. Materials: 1. Cylindrical Locks: ANSI A 156.2, Series 4000 Grade 1, equipped with 6-pin tumbler; "keyed alike" to

match keying system of existing locks to remain if compatible. Provide 2-3/4 inch backset. Provide two keys for each lock.

2. Mortise Locks: ANSI A 156.13, Grade 1, equipped with 6-pin tumbler; "keyed alike" to match keying system of existing locks to remain if compatible. Provide 2-3/4 inch backset. Provide two keys for each lock..

3. Provide Schlage standard C123 keyway (except Pharmacy) 4. Provide Schlage Primus XP cylinders for Pharmacy 300 series locks. 5. Master key, key alike or different as directed. 6. Quantity: In addition to two keys for each lock, provide the following:

a. Cylinder Change Keys: 6 change keys per change b. Master Keys: 10.

7. Latch Sets: Provide push-button releases by turning lever, closing door, or turning emergency release key through hole in outside knob.

8. Strikes: ANSI Strikes, 1-1/4 x 4-7/8 inches, with curved lip. Wrought box strikes, with extended lip for latch bolts, except open strike plates may be used in wood frames. Provide dustproof strikes for foot bolts.

9. Tactile Warning: Provide locks with tactile warning for handicapped codes when required by Authority Having Jurisdiction.

B. Locks by types: Type Description Finish MANUFACTURER/MODEL Schlage L-1 Mortise Cylinder 626 20-001 L-2 Mortise Cylinder 626 20-001-1-1/4 inches L-3 Rim Cylinder 626 20-022 L-4 Classroom Lock 626 ND70PD-Rhodes L-5 Storeroom Lock (F86) 626 ND80PD-Rhodes-25 L-6 Office Lock (F82) 626 ND50PD-Rhodes-10-025 L-7 Passage Latch (F75) 626 ND10S-Rhodes-10-025 L-8 Privacy Lock (F76) 626 ND40S-Rhodes-10-025 L-9 Dead Bolt Lock 626 B661P L-10 Access Control Lock 626 KC5196-2 L-11 Entrance Lock (F81/82) 626 ND53PD-Rhodes-10-025 L-12 Storeroom Lock with

deadbolt 626 L9480-06L

L-13 Institutional Lock (F87) 626 ND82PD-Rhodes-10-025 L-15 Entrance Lock with deadbolt 626 L9453-06L L-16 Dead Bolt Lock with

Thumbturn (Classroom 626 B663P

ADD #1 – 05/25/12

08710-5


Type Description Finish MANUFACTURER/MODEL Schlage

Function) L-17 Storeroom Lock (Grade 2) 626 AL80PD-Saturn L-18 Privacy Lock (Grade 2) 626 AL40S-Saturn L-20 Office Lock

(Grade 2) 626 AL50PD-Saturn

L-21 Passage Latch (Grade 2) 626 AL10S-Saturn L-22 Thumbturn 626 09-905NHxB502-292

2.7 EXIT DEVICES

A. Materials: 1. Provide exposed metal to match hardware. 2. Size and mount units indicated or, if not indicated, to comply with manufacturer's recommendations for

exposure condition. Reinforce substrate as recommended.

B. Exit Devices by types: Type Description Finish MANUFACTURER/MODEL Von Duprin unless otherwise noted. E-1 Exit Device: Rim, exit only, UL listed. 626 99EO-F E-2 Exit Device: Rim, exit only, with alarm. Provide exterior

access model, time delay, or weatherproof when scheduled. 600 Positive Lock:

THPA Series (Size as required for door scheduled) O/A - Outside Access TDL -Time Delay WE - Weatherproof

E-3 Exit Device: Surface vertical rod (top rod only), lever trim, blank escutcheon, UL listed.

626 9927L-F-BE-LBR

E-4 Exit Device: Concealed vertical rod, lever trim, blank escutcheon, UL listed

626 9948L-F-BE

E-5 Exit Device: Rim, lever trim, blank escutcheon, UL listed. 626 99L-F-BE E-7 Exit Device: Rim, pull trim. 626 99NL x 697NL E-8 Exit Device: Rim delay exit device, pull trim, with alarm.

Power Transfer #EPT-10 Power Supply #PS 914

626 SP28

CX9975L x 992L (06 Lever)

E-10 Exit Device: Rim, exit only 626 99EO E-11 Exit Device: Rim, weatherproof, exit only, with alarm. 626 Detex:

V40 EB W AL RWE E-14 Exit Device: Vertical Rod, exit only, with alarm. Provide

outsite access model or time delay when scheduled. 600 Positive Lock:

THPA Series (O/A) - Outside Access (TDL) -Time Delay

E-16 Exit Device: Rim, lever trim 626 99L-992L-NL E-18 Exit Device: Rim, lever trim, UL Listed 626 99L-F-992L-NL E-19

Exit Device: Surface vertical rod, no outside trim, exit only, UL listed.

626 9927EO-F

E-20 Exit Device: Rim, lever trim, blank escutcheon 626 99L-BE E-21 Exit Device 626 99EO E-23 Exit Device: Rim, lever trim, with alarm

Power Transfer #EPT-10 Power Supply #PS-914

626 SP28

CX99NL-F x 696-NL

ADD #1 – 05/25/12

08710-6


Type Description Finish MANUFACTURER/MODEL Von Duprin unless otherwise noted. E-24 Exit Device: Rim, lever trim, with alarm

Power Transfer #EPT-10 Power Supply #PS-914

626 SP28

CX99EO-F

2.8 PULLS AND PUSHES

A. Materials: ANSI A 156.6 for 0.050 inch thickness.

B. Push and Pulls by types: Type Description Finish MANUFACTURER/MODEL Ives Trimco Rockwood P-1 Push 3-1/2 x 15 630 8200 1001-2 70B P-2 Pull 3-1/2 x 15 630 8311-5 1012-2 137x70B P-3 Pull 8 inches CTC x 3/4 inch

dia 630 8103-8 1194-2 107

P-4 Pull 5-1/4 cc 630 8111-5 1102T 132 P-5 Pocket Door Pull Latching black 1069L

2.9 CLOSERS

A. Materials & Features: 1. ANSI A 156.4, grade 1. 2. ADA/ANSI A117.1 3. UL listed. 4. Non-handed, non-sized; adjustable 1-6. 5. 180 degree door opening. 6. Standard cover. 7. Multiple backcheck location valve. 8. Extreme temperature fluid. 9. Sex nuts and bolts (SNBs). 10. Provide exposed metal to match hardware. 11. Size and mount units indicated or, if not indicated, to comply with manufacturer's recommendations for

exposure condition. Reinforce substrate as recommended.

B. Closers by types: Type Description Finish MANUFACTURER/MODEL LCN C-4 Closer: Regular Arm 689 4011-REG C-5 Closer: Parallel Arm 689 4111-EDA C-6 Closer: Regular Arm 689 4031-REG C-7 Closer: Parallel Arm 689 4031-EDA C-8 Closer: Parallel Arm, HO 689 4111-HEDA C-9 Closer: Parallel Arm, HO, positive

stop 689 4111-H-CUSH

C-10 Closer: Regular Arm, HO 689 4031-H C-11 Closer: Parallel Arm, positive stop 689 4031-CUSH C-12

Closer: Parallel Arm, positive stop 689 4111-CUSH

ADD #1 – 05/25/12

08710-7


2.10 DOOR PROTECTION PLATES

A. Materials: J100 Protection Plates conforming to ANSI A 156.6, stainless steel, 0.050" (1.2 mm) minimum thickness. Mount centered, flush with bottom of door. Screws: Phillips head sheet metal screws plated to match plate.

B. Protection Plates by types: Type Description Size Finish MANUFACTURER/MODEL Ives Trimco Rockwood K-2 Kick Plate 10" x (DW-2") 630 8400 K1050 J102 K-3 Armor Plate 34" x (DW-2") 630 8400 K1050 J101 K-4 Armor Plate 41” x (DW-2”)

Notch for lockset 630 8400 K1050 J101

K-5 Kick Plate 18" x (DW-2") 630 8400 K1050 J102 K-6 Armor Plate (UL Rated) 34" x (DW-2") 630 8402 UL KA050-2 Fire Rated K1050F K-7 Armor Plate (UL Rated) 36" x (DW-2") 630 8402 UL KA050-2

Fire Rated K1050F

2.11 STOPS, HOLDERS AND BUMPERS

A. Materials: 1. Door stop mounting: Methods to suit substrates encountered (plastic anchor, drywall anchor, expansion

shield). 2. Provide gray rubber exposed resilient parts. 3. Do not furnish aluminum floor stops. 4. For most doors, the preferred door stop is Wall Stop type S-1 and is specified as such in the hardware

schedule. However, if circumstances prevent a wall stop installation (door too far from perpendicular wall, door swing into adjacent glass, etc.) then substitute a type S-3 or S-4 floor stop as indicated for use intended.

5. Adjust height of floor stops to suit undercut of adjacent door.

B. Stops, Holders and Bumpers by types: Type Description Finish MANUFACTURER/MODEL Ives Trimco Rockwood S-1 Wall Stop 630 WS407CVX W1276CS 409 S-2 Stop & Holder 626 FS445 1207 477 S-4 Floor Stop 626 FS438 1212 3/4ES 442 Rixson Glynn-Johnson S-5 Overhead Stop - 3-0 doors 626 9-336 904S S-6 Overhead Stop - 2-6 doors 626 9-236 902S Ives Trimco Rockwood S-7 Stop & Holder. Kick down

type satin chrome FS452-4 1220-4FF 458

Rixson Glynn-Johnson S-8 Overhead Stop. Medium duty 630 10-236 452S

2.12 ELECTROMAGNETIC DOOR HOLDERS

A. Materials & Features: 1. ANSI A 156.15, Grade 1. 2. UL listed. 3. Magnet protected against transients and surges up to 600 volts. 4. 24V DC

ADD #1 – 05/25/12

08710-8


5. Holding force 35 lbs., nominal. 6. Low residual magnetism for easy release of door. 7. Electrical values +10% -15%. 8. Provide exposed metal to match hardware.

ADD #1 – 05/25/12

08710-9


B. Electromagnetic Door Holders by types:

Type Description Finish MANUFACTURER/MODEL

LCN Rixson DH-1 Door Holder 689 SEM 7850 689 FM-998 SA

2.13 THRESHOLDS

A. Thresholds by types: Type Description MANUFACTURER/MODEL National

Guard Pemko Reese

T-1 Threshold: 5 inches x 1/4 inch, abrasive. 425HD-SIA 5”

1715AK 5”

T-4 Threshold: 2 inches x 1/8 inch, stainless steel plate, smooth surface, beveled 1 side only. Transition threshold between concrete slab and vinyl tile. Set threshold in full bed of silicone sealant, butted to adjacent vinyl tile. Anchor into concrete slab with Hilti Kwik-Con II, #14-134 TFH fasteners spaced at 6-inch centers using Matched Tolerance drill bit for dense concrete.

BAR6SS-2-10bevel

T-9 Threshold: 5 inches, aluminum, stop seal 896S 2005AT S483AS T-10 Threshold: 5 inches, aluminum, stop seal 898V 2006AT

2.14 WEATHERSTRIPPING

A. Weatherstripping by types: Type Description MANUFACTURER/MODEL National Guard Pemko Reese W-3 Door Bottom Sweep, surface mounted sweep, anodized

aluminum, neoprene seal. 201NA 315CN 323A

W-4 Meeting Stile Gaskets, aluminum, silicone insert seal. 160S 303AS 807A W-5 Jamb Door Gaskets, adhesive application, silicone seal. 5050B S88D 797B W-9 Jamb and Head Weatherstripping: Self Adhesive Seal 5075B S773D

2.15 MISCELLANEOUS HARDWARE

A. Silencers: Provide in metal door frames, unless not permitted for fire rating, or unless bumper-type weatherstripping is provided; three for each single door frame, two for double-door frame.

B. Miscellaneous Hardware by types: Type Description Size Finish MANUFACTURER/MODEL Stanley Ives Rockwood M-1 Hasp &

Staple 3-1/2 inches

602 SP915 WS1920

M-3 Surface Bolt 4 inches 626 40 630 M-4 Viewer 626 700 620 Ives Trimco Rockwood

ADD #1 – 05/25/12

08710-10


Type Description Size Finish MANUFACTURER/MODEL Stanley Ives Rockwood M-5 Extension

Flush Bolts (UL)

12 inches

626 458 3917 555

M-6 Automatic Flush Bolt

626 FB42 1948

Ives Trimco Rockwood M-8 Silencers SR64 1229-A 608 National Guard Pemko Reese M-9 Drip Cap 16A 346CxFW R201A Ives Trimco M-10 Door Coordinator COR x MB x FL 3092 x MB x W Arrow Detex M-11 Door Alarm 626 130 Series AL EAX-500 M-12 Door Alarm gray Alarm: EAX-2500F

Transformer: PP5152-3 Rockwood M-14 Mail Slot 630 RS-2-1251-32D M-15 Latch Protector 630 321 Von Duprin Schlage Securitron M-16 Electric Strike, grade 1,

FSE (fail secure), 24VDC unless noted otherwise in schedule

630 6211

M-17 Power Supply PS902 M-18 Push Button 660PB M-19 Electric Strike 626 UNL-24 M-20 Power Supply BPS-24-1 M-21 Keypad & Controller DK-26SS M-21a Keypad DK-26PSS Von Duprin M-24 Mullion 626 9954 M-25 Strike 626 499F

2.16 FABRICATION

A. Finish and Base Material Designations: Number indicates Builders Hardware Manufacturer’s Association (BHMA) Code or nearest traditional U.S. commercial finish.

B. Where base material and quality of finish are not otherwise indicated, provide at least commercially recognized quality.

C. Fasteners: Provide door hardware manufactured to comply with published templates prepared for machine, wood, and sheet metal screws. Provide screws that comply with commercially recognized industry standards for application intended, except aluminum fasteners are not permitted. Provide Phillips flat-head screws with finished heads to match surface of door hardware, unless otherwise indicated. 1. Fire-Rated Applications:

a. Wood or Machine Screws: For the following: 1) Hinges mortised to doors or frames. 2) Strike plates to frames. 3) Closers to doors and frames.

b. Steel Through Bolts: For the following unless door blocking is provided:

ADD #1 – 05/25/12

08710-11


1) Surface hinges to doors. 2) Closers to doors and frames. 3) Surface-mounted exit devices.

2. Spacers or Sex Bolts: For through bolting of hollow-metal doors. 3. Gasketing Fasteners: Provide noncorrosive fasteners for exterior applications and elsewhere

as indicated.

PART 3 - EXECUTION

3.1 EXAMINATION

A. Verify that doors and frames are ready to receive Work and dimensions are as instructed by the manufacturer.

B. Verify that electric power is available to power operated devices and of the correct characteristics.

3.2 INSTALLATION

A. Hardware Mounting Heights: Door and Hardware Institute Recommended Locations for Builders Hardware for Standard Steel Doors and Frames, except as otherwise indicated. 1. Conform to requirements of applicable local, State or Federal disabled access requirements for the

installation and operation of door hardware. 2. Install electromagnetic door holder at 24 inches above finish floor elevation at manufacturer’s

recommended distance from the door’s leading edge.

B. Install each hardware item to comply with manufacturer's instructions and recommendations, unless otherwise specified.

C. Thru-bolt closers on doors.

D. Vestibule Thresholds: Install as shown on Drawings.

3.3 FIELD QUALITY CONTROL BY OWNER

A. Manufacturer's Technical Representative will provide site observation at completion of installation of doors and hardware including the following. 1. Inspect closers; exit devices (except Detex and Positive Lock); locks, latches, and bolts; and electric strikes. 2. Verify hardware installed is as specified. 3. Verify proper installation. 4. Verify proper operation.

B. Manufacturer’s Technical Representative shall be the manufacturer of the items to be inspected. Contractor shall notify the following manufacturer’s represententive completion of installation doors and hardware: 1. Jerry Davis, IR Security & Safety National Accounts Manager (678) 906-2106,

[email protected].

C. Manufacturer’s Technical Representative will prepare Observation Report and submit to Architect for posting by Architect of deficiencies on the Owner Observation Log. Observation Report will indicate the following: 1. Store number and location. 2. Time and date of observaton. 3. Name and contact information of Manufacturer’s Technical Representative. 4. Summary of observation. 5. Identification of deficiencies describing precise door number, hardware item, nature of deficiency, and

recommended resolution.

mailto:[email protected]

ADD #1 – 05/25/12

08710-12


6. Signature of Manufacturer’s Technical Representative.

3.4 ADJUSTING

A. Hardware Adjustment: Adjust hardware for proper operation and function one month after Substantial Completion. Instruct Owner’s personnel in proper maintenance and adjustment.

3.5 HARDWARE SCHEDULE

A. Hardware Set numbers below correspond to the Door Schedule as shown on the drawings.

B. Any hardware item specified in the Tables in Part 2 above which corresponds to the mark associated with the item ( E.g. H-1, E-2, etc.) as shown in the Hardware Schedule below may be provided.

ADD #1 – 05/25/12

08710-13


UniSpec II - HARDWARE SCHEDULE: WNM 102811 Door 100A – Sales (ETR): HM, Two Singles, Exterior w/ Exit Device 3 pr. H-11 Butts 2 ea. E-2 Alarm Exit Device 2 ea. T-9 Threshold 2 ea. W-3 Door Bottom Weatherstrip 2 set W-9 Jamb & Head Weatherstrip 1 ea. M-9 Drip Cap Door 100B – Sales (ETR): HM, Two Singles, Exterior w/ Exit Device 3 pr. H-11 Butts 2 ea. E-2 Alarm Exit Device 2 ea. T-9 Threshold 2 ea. W-3 Door Bottom Weatherstrip 2 set W-9 Jamb & Head Weatherstrip 1 ea. M-9 Drip Cap Door 100C – Sales (ETR): HM, Two Singles, Exterior w/ Exit Device 3 pr. H-11 Butts 2 ea. E-2 Alarm Exit Device 2 ea. T-9 Threshold 2 ea. W-3 Door Bottom Weatherstrip 2 set W-9 Jamb & Head Weatherstrip 1 ea. M-9 Drip Cap Door 100D – Sales (ETR): HM, Two Singles, Exterior w/ Exit Device 3 pr. H-11 Butts 2 ea. E-2 Alarm Exit Device 2 ea. T-9 Threshold 2 ea. W-3 Door Bottom Weatherstrip 2 set W-9 Jamb & Head Weatherstrip 1 ea. M-9 Drip Cap Door 101A - Customer Service: Café Traffic, Pair Hardware furnished by door manufacturer as specified in Section 08383. Door 102A - Cash Room: HM, Single 1 ea. H-7 Continuous Geared Hinge 1 ea. L-12 Storeroom Lock with Deadbolt 1 ea. C-4 Closer 3 ea. M-8 Silencers 1 ea. S-1 Wall Stop 2 ea. M-4 One-Way Viewer mount 1 ea @ 48” & 60” AFF 1 ea. M-14 Mail Slot 1 ea. K-2 Kick Plate Door 105A – Family Toilet: HM, Single 1 ea. H-7 Continuous Geared Hinge 1 ea. L-18 Privacy Lock 1 ea. C-4 Closer 3 ea. M-8 Silencers 1 ea. K-3 Armor Plate 1 ea. S-7 Stop and Holder

ADD #1 – 05/25/12

08710-14


Door 106A - UPC: HM, Single 1 ea. H-7 Continuous Geared Hinge 1 ea. L-6 Office Lock 1 ea. C-11 Closer 3 ea. M-8 Silencers 1ea. K-2 Kick Plate Door 107A - Manager’s Office: HM, Single 1 ea. H-7 Continuous Geared Hinge 1 ea. L-6 Office Lock 1 ea. C-10 Closer 1 ea. S-1 Wall Stop 3 ea. M-8 Silencers 1ea. K-2 Kick Plate Door 108A – Training: HM, Single 1 ea. H-7 Continuous Geared Hinge 1 ea. L-6 Office Lock 1 ea. C-9 Closer 3 ea. M-8 Silencers 1 ea. K-2 Kick Plate 1 ea. S-1 Wall Stop Door 109A – Breakroom: HM, Single 1 ea. H-7 Continuous Geared Hinge 1 ea. P-1 Push 1 ea. P-2 Pull 1 ea. C-8 Closer 1 ea. S-1 Wall Stop 3 ea. M-8 Silencers 1 ea. K-2 Kick Plate Door 109B – Breakroom (ETR): HM, Single, Exterior w/ Exit Device 1-1/2 pr. H-11 Butts 1 ea. E-2 Alarm Exit Device 1 ea. T-9 Threshold 1 ea. S-4 Floor Stop 1 ea. W-3 Door Bottom Weatherstrip 1 set W-9 Jamb & Head Weatherstrip 1 set M-9 Drip Cap

1

Door 110A - Storage: HM, Single 1 ea. H-7 Continuous Geared Hinge 1 ea. L-5 Storeroom Lock 1 ea. C-9 Closer 1 ea. K-3 Armor Plate 3 ea. M-8 Silencers Door 112A - Pharmacy: HM, Single 1 ea. H-7 Continuous Geared Hinge 1 ea. L-15 Entrance Lock w/ Deadbolt 1 ea. C-4 Closer 2 ea. M-8 Silencers 2 ea. K-2 Kick Plate

ADD #1 – 05/25/12

08710-15


Door 112B - Pharmacy: Overhead Rolling Closure Hardware furnished by door manufacturer as specified in Section 08332. Door 113A - Pharmacy Checkout: Café Traffic, Single Harware furnished by door manufacturer per Section 08383. Door 114A – Pharmacy Toilet: HM, Single 1 ea. H-7 Continuous Geared Hinge 1 ea. L-18 Privacy Lock 1 ea. C-11 Closer 3 ea. M-8 Silencers Door 115A – Vestibule (ETR): Aluminum/Glass, Bi-Parting Automatic w/ Breakaway 1 ea. L-1 Keyed Cylinder 1 ea. Locking Device See Section 08462. 1 ea. Threshold See Section 08462. All other hardware furnished by door manufacturer as specified in Section 08462. Door 115B – Vestibule (ETR): Aluminum/Glass, Bi-Parting Automatic w/ Breakaway 1 ea. L-1 Keyed Cylinder 1 ea. Locking Device See Section 08462. 1 ea. Threshold See Section 08462. All other hardware furnished by door manufacturer as specified in Section 08462. Door 116A – Vestibule (ETR): Aluminum/Glass, Bi-Parting Automatic w/ Breakaway 1 ea. L-1 Keyed Cylinder 1 ea. Locking Device See Section 08462. 1 ea. Threshold See Section 08462. All other hardware furnished by door manufacturer as specified in Section 08462. Door 116B – Vestibule (ETR): Aluminum/Glass, Bi-Parting Automatic w/ Breakaway 1 ea. L-1 Keyed Cylinder 1 ea. Locking Device See Section 08462. 1 ea. Threshold See Section 08462. All other hardware furnished by door manufacturer as specified in Section 08462. Door 119A – AP Office (ETR): HM, Single

1

1 ea. H-7 Continuous Geared Hinge 1 ea. L-20 Office Lockset 1 ea. S-1 Wall Stop 3 ea. M-8 Silencers Door 120A – Receiving (ETR): HM, Two Singles, w/ Exit Device, Exterior 3 pr. H-9 Butts 2 ea. E-2 Alarm Exit Device 2 ea. T-9 Threshold 2 ea. W-3 Door Bottom Weatherstrip 2 sets W-9 Jamb & Head Weatherstrip 1 ea. M-9 Drip Cap

1

Door 120B – Receiving: Full Height Traffic, Pair Hardware furnished by door manufacturer as specified in Section 08383.

ADD #1 – 05/25/12

08710-16


Door 120C - Receiving: Sectional Overhead Hardware furnished by door manufacturer as specified in Section 08360. Door 120D – Receiving (ETR): Sectional Overhead Hardware furnished by door manufacturer as specified in Section 08360. Door 120E – Receiving (ETR): Sectional Overhead Hardware furnished by door manufacturer as specified in Section 08360. Door 120F - Receiving: Chain Link Gate, Pair Hardware furnished by fence manufacturer as specified in Section 02821. Door 121A - Electrical: HM, Single, w/ Exit Device 1-1/2 pr. H-11 Butts 1 ea. E-2 Alarm Exit Device w/mortise cylinder and removable core 1 ea. T-9 Threshold 1 ea. W-3 Door Bottom Weatherstrip 1 set W-9 Jamb & Head Weatherstrip 1 ea. M-9 Drip Cap Door 121B – Electrical: HM, Single 1 ea. H-7 Continuous Geared Hinge 1 ea. E-6 Exit Device 1 ea. C-11 Closer 3 ea. M-8 Silencers 1 ea. K-2 Kick Plate Door 122A - Mechanical: HM, Pair, Interior 2 ea. H-7 Continuous Geared Hinge 1 ea. L-17 Storeroom Lock 1 ea. C-7 Closer Active Leaf 1 set M-5 Extension Flush Bolts 1 pr. W-4 Meeting Style Gaskets Door 125A - Alcove: HM, Two Singles, Exterior w/ Exit Device 3 pr. H-11 Butts 2 ea. E-2 Alarm Exit Device 2 ea. T-9 Threshold 2 ea. W-3 Door Bottom Weatherstrip 2 set W-9 Jamb & Head Weatherstrip 1 ea. M-9 Drip Cap Door 125B - Alcove: Full Height Traffic, Pair 1 ea. T-4 Threshold Hardware furnished by door manufacturer per Section 08383. Door 126A - Closet: HM, Single 1 ea. H-7 Continuous Geared Hinge 1 ea. L-17 Storeroom Lock 3 ea. M-8 Silencers 1 ea. S-8 Overhead Stop

ADD #1 – 05/25/12

08710-17


Door 143A - Produce Prep: Full Height Traffic, Pair Hardware furnished by door manufacturer as specified in Section 08383. Door 148A – Bakery Prep: Full Height Traffic, Single Hardware furnished by door manufacturer as specified in Section 08383. Door 149A – Deli Prep: Full Height Traffic, Single Hardware furnished by door manufacturer as specified in Section 08383. Door 159B – Pump Room: HM, Single, Interior 1 ea. H-7) Continuous Geared Hinge 1 ea. L-17 Storeroom Lock 1 ea. S-1 Wall Stop 3 ea. M-8 Silencers 1 ea. C-7 Closer

END OF SECTION

wal-mart stores, inc. store no. 3178 05/25/2012 project ... · pdf filewal-mart stores, inc....

Documents