HP-UX rx10a0vp B.11.31 U ia64 (ta)login: rootPassword:Last successful login: Wed Oct 31 02:05:42 EDT 2012 ::ffff:172.16.110.33Last authentication failure: Fri Jul 23 14:09:32 EDT 2010 ::ffff:192.168.100.63 Please wait...checking for disk quotas(c)Copyright 1983-2006 Hewlett-Packard Development Company, L.P.(c)Copyright 1979, 1980, 1983, 1985-1993 The Regents of the Univ. of California(c)Copyright 1980, 1984, 1986 Novell, Inc.(c)Copyright 1986-2000 Sun Microsystems, Inc.(c)Copyright 1985, 1986, 1988 Massachusetts Institute of Technology(c)Copyright 1989-1993 The Open Software Foundation, Inc.(c)Copyright 1990 Motorola, Inc.(c)Copyright 1990, 1991, 1992 Cornell University(c)Copyright 1989-1991 The University of Maryland(c)Copyright 1988 Carnegie Mellon University(c)Copyright 1991-2006 Mentat Inc.(c)Copyright 1996 Morning Star Technologies, Inc.(c)Copyright 1996 Progressive Systems, Inc.Confidential computer software. Valid license from HP required forpossession, use or copying. Consistent with FAR 12.211 and 12.212,Commercial Computer Software, Computer Software Documentation, andTechnical Data for Commercial Items are licensed to the U.S. Governmentunder vendor's standard commercial license.********************************************************************************* See the file /tmp/SystemConfig for full details of the configuration *********************************************************************************You have mail.Value of TERM has been set to "xterm".WARNING: YOU ARE SUPERUSER !!root@rx10a0vp [/root] who -Rroot console Oct 31 01:08 (rx10a0vp)root pts/ta Oct 31 19:51 (172.16.110.33)root@rx10a0vp [/root] dateWed Oct 31 19:51:28 EDT 2012root@rx10a0vp [/root] vparstatusvparstatus: Error: Virtual partition monitor not running.root@rx10a0vp [/root] vparstatusvparstatus: Error: Virtual partition monitor not running.root@rx10a0vp [/root] ls /stand.kc.lock ext_ioconfig last_install vmunixboot.sys ext_ioconfig.lkg lost+found vpmonbootconf ioconfig nextbootbootfs ioconfig.lkg rootconfcurrent krs systemroot@rx10a0vp [/root] vi /tmp/vpar0"/tmp/vpar0" [New file]vparcreate -p vpar0 \-a io:1.0.0 -a io:1.0.0.3.0.6.0:BOOT \-a io:1.0.1 \-a cpu::1 -a cpu:::1:4 \-a mem::2048:base -a mem::1024:float \-a cell:1:mem::512:base -a cell:1:mem::512:float \-g ilm:256:y -g clm:128:y~~~~~~~~~~~~~~~~"/tmp/vpar0" [New file] 7 lines, 216 charactersroot@rx10a0vp [/root] sh - x /tmp/vpar0sh: x: not found.root@rx10a0vp [/root] sh -x /tmp/vpar0+ vparcreate -p vpar0 -a io:1.0.0 -a io:1.0.0.3.0.6.0:BOOT -a io:1.0.1 -a cpu::1 -a cpu:::1:4 -a mem::2048:base -a mem::1024:float -a cell:1:mem::512:base -a cell:1:mem::512:float -g ilm:256:y -g clm:128:yvparcreate: Note: Please ensure that sufficient base memory has been configured to enable the vPar to boot.Capturing the Hardware path to EFI path mapping of bootable disks:Done.vparcreate: Warning: Unable to validate CLM granule size. Please validate manually.vparcreate: Note: Database is created with the following information: CLM granularity is 128 MBytes ILM granularity is 256 MBytesAll the subsequent virtual partition's CLM or ILM memory specifications must be an integral multiple of the corresponding granularity.root@rx10a0vp [/root]root@rx10a0vp [/root] vparstatus -v|morevparstatus: Warning: Not accessing live monitor database, Requested resources shown.[Virtual Partition Details]Name: vpar0State: N/AAttributes: Dynamic,Autoboot,NosearchKernel Path: /stand/vmunixBoot Opts:[CPU Details]Min/Max: 1/4User assigned [Path]:Boot processor [Path]:Monitor assigned [Path]: Non-cell-specific: User assigned [Count]: 0 Monitor assigned [Count]: 1Cell-specific [Count]: Cell ID/Count [IO Details] 1.0.0 1.0.0.3.0.6.0 BOOT 1.0.1[Memory Details]ILM, user-assigned [Base /Range]: (bytes) (MB)ILM, monitor-assigned [Base /Range]: (bytes) (MB)ILM Total (MB): 3072 (Floating 1024)ILM Granularity (MB): 256CLM, user-assigned [CellID Base /Range]: (bytes) (MB)CLM, monitor-assigned [CellID Base /Range]: (bytes) (MB)CLM (CellID MB): 1 1024 (Floating 512)CLM Granularity (MB): 128[OL* Details]Sequence ID: N/AOperation: N/AStatus: N/Aroot@rx10a0vp [/root]root@rx10a0vp [/root]root@rx10a0vp [/root] ls /stand.kc.lock ext_ioconfig last_install vmunixboot.sys ext_ioconfig.lkg lost+found vpdbbootconf ioconfig nextboot vpmonbootfs ioconfig.lkg rootconfcurrent krs systemroot@rx10a0vp [/root] lvlnboot -vBoot Definitions for Volume Group /dev/vg00:Physical Volumes belonging in Root Volume Group: /dev/disk/disk7_p2 -- Boot DiskBoot: lvol1 on: /dev/disk/disk7_p2Root: lvol3 on: /dev/disk/disk7_p2Swap: lvol2 on: /dev/disk/disk7_p2Dump: lvol2 on: /dev/disk/disk7_p2, 0root@rx10a0vp [/root] mkboot -a "boot vpmon -a" /dev/rdisk/disk7root@rx10a0vp [/root] vparenv -m vParsvparenv: Warning: Unable to validate CLM granule size. Please validate manually.root@rx10a0vp [/root] vparenvvparenv: The next boot mode setting is "vPars".vparenv: The CLM granule size setting is 128.vparenv: The ILM granule size setting is 256.vparenv: Note: Any changes in the above settings will become effectiveonly after the next system reboot.vparenv: Note: The maximum possible CLM granules per cell is 512.vparenv: Note: The maximum possible ILM granules for this system is 1024.root@rx10a0vp [/root] vparefiutil -uroot@rx10a0vp [/root] vparefiutilHardware path - EFI path mapping================================ Hardware path : 1.0.0.3.0.6.0 : 1.0.0.3.0.6.0 EFI path : Acpi(HWP0002,PNP0A03,100)/Pci(3|0)/Scsi(Pun6,Lun0)/HD(Part1,Sig5B0B4174-2189-11E2-8000-D6217B60E588)/\EFI\HPUX\HPUX.EFI Hardware path : 1.0.1.1.0.4.1.6.0 : 1.0.1.1.0.4.1.6.0 EFI path : Acpi(HWP0002,PNP0A03,101)/Pci(1|0)/Pci(4|1)/Scsi(Pun6,Lun0)/HD(Part1,Sig468FBF0E-2184-11E2-8000-D6217B60E588)/\EFI\HPUX\HPUX.EFI Hardware path : 1.0.2.1.0.1.0.0.0.0.1 : 1.0.2.1.0.0x50014380025d1898.0x4001000000000000 EFI path : Acpi(HWP0002,PNP0A03,102)/Pci(1|0)/Fibre(WWN50014380025D1898,Lun4001000000000000)/HD(Part1,Sig495DEDAA-C4F1-11E0-8000-D6217B60E588)/\EFI\HPUX\HPUX.EFI Hardware path : 1.0.2.1.0.1.0.0.0.0.2 : 1.0.2.1.0.0x50014380025d1898.0x4002000000000000 EFI path : Acpi(HWP0002,PNP0A03,102)/Pci(1|0)/Fibre(WWN50014380025D1898,Lun4002000000000000)/HD(Part1,Sig495DEDAA-C4F1-11E0-8000-D6217B60E588)/\EFI\HPUX\HPUX.EFI Hardware path : 1.0.2.1.0.1.0.0.0.0.3 : 1.0.2.1.0.0x50014380025d1898.0x4003000000000000 EFI path : Acpi(HWP0002,PNP0A03,102)/Pci(1|0)/Fibre(WWN50014380025D1898,Lun4003000000000000)/HD(Part1,Sig495DEDAA-C4F1-11E0-8000-D6217B60E588)/\EFI\HPUX\HPUX.EFI Hardware path : 1.0.2.1.0.1.0.0.0.0.4 : 1.0.2.1.0.0x50014380025d1898.0x4004000000000000 EFI path : Acpi(HWP0002,PNP0A03,102)/Pci(1|0)/Fibre(WWN50014380025D1898,Lun4004000000000000)/HD(Part1,Sig5B2B3F92-C4F1-11E0-8000-D6217B60E588)/\EFI\HPUX\HPUX.EFI Hardware path : 1.0.2.1.0.1.0.0.0.0.5 : 1.0.2.1.0.0x50014380025d1898.0x4005000000000000 EFI path : Acpi(HWP0002,PNP0A03,102)/Pci(1|0)/Fibre(WWN50014380025D1898,Lun4005000000000000)/HD(Part1,Sig17396F58-65D4-11DE-8002-D6217B60E588)/\EFI\HPUX\HPUX.EFI Hardware path : 1.0.2.1.0.1.1.0.0.0.1 : 1.0.2.1.0.0x50014380025d189c.0x4001000000000000 EFI path : Acpi(HWP0002,PNP0A03,102)/Pci(1|0)/Fibre(WWN50014380025D189C,Lun4001000000000000)/HD(Part1,Sig495DEDAA-C4F1-11E0-8000-D6217B60E588)/\EFI\HPUX\HPUX.EFI Hardware path : 1.0.2.1.0.1.1.0.0.0.2 : 1.0.2.1.0.0x50014380025d189c.0x4002000000000000 EFI path : Acpi(HWP0002,PNP0A03,102)/Pci(1|0)/Fibre(WWN50014380025D189C,Lun4002000000000000)/HD(Part1,Sig495DEDAA-C4F1-11E0-8000-D6217B60E588)/\EFI\HPUX\HPUX.EFI Hardware path : 1.0.2.1.0.1.1.0.0.0.3 : 1.0.2.1.0.0x50014380025d189c.0x4003000000000000 EFI path : Acpi(HWP0002,PNP0A03,102)/Pci(1|0)/Fibre(WWN50014380025D189C,Lun4003000000000000)/HD(Part1,Sig495DEDAA-C4F1-11E0-8000-D6217B60E588)/\EFI\HPUX\HPUX.EFI Hardware path : 1.0.2.1.0.1.1.0.0.0.4 : 1.0.2.1.0.0x50014380025d189c.0x4004000000000000 EFI path : Acpi(HWP0002,PNP0A03,102)/Pci(1|0)/Fibre(WWN50014380025D189C,Lun4004000000000000)/HD(Part1,Sig5B2B3F92-C4F1-11E0-8000-D6217B60E588)/\EFI\HPUX\HPUX.EFI Hardware path : 1.0.2.1.0.1.1.0.0.0.5 : 1.0.2.1.0.0x50014380025d189c.0x4005000000000000 EFI path : Acpi(HWP0002,PNP0A03,102)/Pci(1|0)/Fibre(WWN50014380025D189C,Lun4005000000000000)/HD(Part1,Sig17396F58-65D4-11DE-8002-D6217B60E588)/\EFI\HPUX\HPUX.EFIroot@rx10a0vp [/root]CTRL+AMON console is virtualMonitor boot disk path: 1.0.0.3.0.6.0Monitor boot filename: /stand/vpmonDatabase filename: /stand/vpdbMemory ranges used: 0x0/347766784 monitor 0x14ba8000/1449984 firmware 0x14d0a000/835584 monitor 0x14dd6000/688128 firmware 0x14e7e000/1499136 monitor 0x14fec000/50413568 firmware 0x18000000/134213632 monitor 0x3ffec000/81920 firmware 0x781fc000000/67108864 firmwareroot@rx10a0vp [/root][MON]MON> helpSupported Commands:? Print list of commandsbootpath Display monitor boot pathcbuf Dump contents of console bufferclear_pending Clear pending reboot for reconfig flaghelp Print list of commandslog View the event logmon_bootpath Set vPars monitor boot pathmonadmin Manage the virtual partition flexible administrative capabilityreaddb Read a partition DBreboot Reboot Monitorrelease Display release version information for the monitorscan Scan the systemthreads View or modify nPar HyperThreading settingstoddriftreset Reset the TOD drift of all vparsvparinfo Display vPar infovparload Launch a vParMON> bootpathLegacy : 1/0/0/3/0.6.0Lunpath: 1/0/0/3/0.6.0(F)irst, (L)ast, (N)ext or , (P)revious, ^B to exit to menuAcpi(HWP0002,PNP0A03,100)/Pci(3|0)/Scsi(Pun6,Lun0)/HD(Part1,Sig5B0B4174-2189-11E2-8000-D6217B60E588)/\EFI\HPUX\HPUX.EFIMON> mon_bootpath -dHP-UX Primary Boot: 1/0/0/3/0.0x6.0x0MON> releasevPar release version A.05.06Build string: @(#) $Revision: vmunix: B.11.31.1003_LR FLAVOR=perfMON> scan1 cell AML path=_SB_N001 VPAR=ALL1.0 sba AML path=_SB_N001S016 VPAR=ALL1.0.0 lba AML path=_SB_N001S016IOC0L000 VPAR=vpar01.0.1 lba AML path=_SB_N001S016IOC0L001 VPAR=vpar01.0.2 lba AML path=_SB_N001S016IOC0L002 VPAR=NONE1.0.4 lba AML path=_SB_N001S016IOC0L004 VPAR=NONE1.0.6 lba AML path=_SB_N001S016IOC0L006 VPAR=NONE1.0.8 lba AML path=_SB_N001S016IOC1L008 VPAR=NONE1.0.10 lba AML path=_SB_N001S016IOC1L010 VPAR=NONE1.0.12 lba AML path=_SB_N001S016IOC1L012 VPAR=NONE1.0.14 lba AML path=_SB_N001S016IOC1L014 VPAR=NONE1.120 proc AML path=_SB_N001P008 VPAR=vpar0(F)irst, (L)ast, (N)ext or , (P)revious, ^B to exit to menu1.121 proc AML path=_SB_N001P009 VPAR=NONE1.122 proc AML path=_SB_N001P010 VPAR=NONE1.123 proc AML path=_SB_N001P011 VPAR=NONE1.124 proc AML path=_SB_N001P012 VPAR=NONE1.125 proc AML path=_SB_N001P013 VPAR=NONEMON> vparinfoNames of the partitions in the database:----------------------------------------vpar0 (up)Cell 1 total cpus 6 free cpus 5The following CPUs are unassigned:1/121 1/122 1/123 1/124 1/125The following CPUs are disabled:ILM Memory: total 5631 MB free 2559 MBCell 1 CLM Memory total 1982 MB free 958 MBAvailable MEM RANGEs:(F)irst, (L)ast, (N)ext or , (P)revious, ^B to exit to menuILM : 0x30000000-0x3FEFFFFF (261120 Kb)ILM : 0x4070000000-0x40FFFFFFFF (2359296 Kb)CLM(cell 1): 0x781C0000000-0x781F7FFFFFF (917504 Kb)CLM(cell 1): 0x781F8000000-0x781FBDFFFFF (63488 Kb)Monitor Reserved MEM RANGE: 0x0-0x14BA7FFF (339616 Kb)Firmware Reserved MEM RANGE: 0x14BA8000-0x14D09FFF (1416 Kb)Monitor Reserved MEM RANGE: 0x14D0A000-0x14DD5FFF (816 Kb)Firmware Reserved MEM RANGE: 0x14DD6000-0x14E7DFFF (672 Kb)Monitor Reserved MEM RANGE: 0x14E7E000-0x14FEBFFF (1464 Kb)Firmware Reserved MEM RANGE: 0x14FEC000-0x17FFFFFF (49232 Kb)Monitor Reserved MEM RANGE: 0x18000000-0x1FFFEFFF (131068 Kb)Firmware Reserved MEM RANGE: 0x3FFEC000-0x3FFFFFFF (80 Kb)Firmware Reserved MEM RANGE: 0x781FC000000-0x781FFFFFFFF (65536 Kb)MON> vparinfo vpar0Total CPUs: 1User specified cpu count: 0CLP count(cell 1): 0The following CPUs belong to partition:(F)irst, (L)ast, (N)ext or , (P)revious, ^B to exit to menu1/120ILM Effective Size: 3145728 kb (Floating 1048576 kb)CLM Effective Size(cell 1): 1048576 kb (Floating 524288 kb)Monitor Assigned ILM RANGE : 0x20000000-0x2FFFFFFF (262144 Kb) BaseMonitor Assigned ILM RANGE : 0x100000000-0x16FFFFFFF (1835008 Kb) BaseMonitor Assigned ILM RANGE : 0x170000000-0x17FFFFFFF (262144 Kb) FloatingMonitor Assigned ILM RANGE : 0x4040000000-0x406FFFFFFF (786432 Kb) FloatingMonitor Assigned CLM RANGE(cell 1): 0x78180000000-0x7819FFFFFFF (524288 Kb) BaseMonitor Assigned CLM RANGE(cell 1): 0x781A0000000-0x781BFFFFFFF (524288 Kb) FloatingBoot: 1/0/0/3/0.6.0Alt boot: Not specifiedBoot Image: (1/0/0/3/0.6.0;)/stand/vmunixBoot Options:(F)irst, (L)ast, (N)ext or , (P)revious, ^B to exit to menuAUTOBOOT:onDYNAMICMON>[vpar0]root@rx10a0vp [/root] vparstatus[Virtual Partition] BootVirtual Partition Name State Attributes Kernel Path Opts============================== ===== ============ ======================= =====vpar0 Up Dyn,Auto,Nsr /stand/vmunix[Virtual Partition Resource Summary] CPU Num Num Memory GranularityVirtual Partition Name Min/Max CPUs IO ILM CLM============================== ======= ==== ==== ========== ==========vpar0 1/ 4 1 3 256 128 Memory (MB) ILM CLM(F)irst, (L)ast, (N)ext or , (P)revious, ^B to exit to menu # User # UserVirtual Partition Name Ranges/MB Total MB Ranges/MB Total MB============================== ====================== ======================vpar0 0/ 0 3072 0/ 0 1024root@rx10a0vp [/root] cp /tmp/vpar0 /tmp/vpar1root@rx10a0vp [/root] vi /tmp/vpar1"/tmp/vpar1" 7 lines, 216 charactersvparcreate -p vpar1 \-a io:1.0.2 -a io:1.0.2.1.0.1.0.0.0.0.5:BOOT \-a io:1.0.6 \-a cpu::1 -a cpu:::1:4 \-a mem::2048:base \-a cell:1:mem::1024:base~~~~~~~~~~~~~~~~~"/tmp/vpar1" 6 lines, 154 charactersroot@rx10a0vp [/root] sh -x /tmp/vpar1+ vparcreate -p vpar1 -a io:1.0.2 -a io:1.0.2.1.0.1.0.0.0.0.5:BOOT -a io:1.0.6 -a cpu::1 -a cpu:::1:4 -a mem::2048:base -a cell:1:mem::1024:basevparcreate: Warning: "-a cell:1:mem::1024:base": Specified memory size was rounded up to the next CLM granule boundary or to limit of available memory.root@rx10a0vp [/root] vparstatus[Virtual Partition] BootVirtual Partition Name State Attributes Kernel Path Opts============================== ===== ============ ======================= =====vpar0 Up Dyn,Auto,Nsr /stand/vmunixvpar1 Down Dyn,Auto,Nsr /stand/vmunix[Virtual Partition Resource Summary] CPU Num Num Memory Granularity(F)irst, (L)ast, (N)ext or , (P)revious, ^B to exit to menuVirtual Partition Name Min/Max CPUs IO ILM CLM============================== ======= ==== ==== ========== ==========vpar0 1/ 4 1 3 256 128vpar1 1/ 4 1 3 256 128 Memory (MB) ILM CLM # User # UserVirtual Partition Name Ranges/MB Total MB Ranges/MB Total MB============================== ====================== ======================vpar0 0/ 0 3072 0/ 0 1024vpar1 0/ 0 2048 0/ 0 958root@rx10a0vp [/root] vparstatus -v[Virtual Partition Details]Name: vpar0State: UpOS Version: B.11.31Attributes: Dynamic,Autoboot,NosearchKernel Path: /stand/vmunixBoot Opts:(F)irst, (L)ast, (N)ext or , (P)revious, ^B to exit to menu[CPU Details]Min/Max: 1/4User assigned [Path]:Boot processor [Path]: 1.120Monitor assigned [Path]:Non-cell-specific: User assigned [Count]: 0 Monitor assigned [Count]: 1Cell-specific [Count]: Cell ID/Count [IO Details] 1.0.0 1.0.0.3.0.6.0 BOOT 1.0.1[Memory Details]ILM, user-assigned [Base /Range]:(F)irst, (L)ast, (N)ext or , (P)revious, ^B to exit to menu (bytes) (MB)ILM, monitor-assigned [Base /Range]: 0x20000000/256 (bytes) (MB) 0x100000000/1792 0x170000000/256 (Floating) 0x4040000000/768 (Floating)ILM Total (MB): 3072 (Floating 1024)ILM Granularity (MB): 256CLM, user-assigned [CellID Base /Range]: (bytes) (MB)CLM, monitor-assigned [CellID Base /Range]: 1 0x78180000000/512 (bytes) (MB) 1 0x781a0000000/512 (Floating)CLM (CellID MB): 1 1024 (Floating 512)CLM Granularity (MB): 128[OL* Details]Sequence ID: N/A(F)irst, (L)ast, (N)ext or , (P)revious, ^B to exit to menuOperation: N/AStatus: N/A[Virtual Partition Details]Name: vpar1State: DownOS Version: UnknownAttributes: Dynamic,Autoboot,NosearchKernel Path: /stand/vmunixBoot Opts:[CPU Details]Min/Max: 1/4User assigned [Path]:Boot processor [Path]:Monitor assigned [Path]: Non-cell-specific:(F)irst, (L)ast, (N)ext or , (P)revious, ^B to exit to menu User assigned [Count]: 0 Monitor assigned [Count]: 1Cell-specific [Count]: Cell ID/Count [IO Details] 1.0.2 1.0.2.1.0.1.0.0.0.0.5 BOOT 1.0.6[Memory Details]ILM, user-assigned [Base /Range]: (bytes) (MB)ILM, monitor-assigned [Base /Range]: (bytes) (MB)ILM Total (MB): 2048 (Floating 0)ILM Granularity (MB): 256CLM, user-assigned [CellID Base /Range]:(F)irst, (L)ast, (N)ext or , (P)revious, ^B to exit to menu (bytes) (MB)CLM, monitor-assigned [CellID Base /Range]: (bytes) (MB)CLM (CellID MB): 1 958 (Floating 0)CLM Granularity (MB): 128[OL* Details]Sequence ID: N/AOperation: N/AStatus: N/Aroot@rx10a0vp [/root] vparboot -p vpar1vparboot: Booting vpar1. Please wait...root@rx10a0vp [/root][vpar1] Initializing IO Devices ...(F)irst, (L)ast, (N)ext or , (P)revious, ^B to exit to menu LBA Cell 01 (06/07): Occupied PCI-X 133MHz Scan PCI: Rope Slot Seg Bus Dev Fun Card ==================================================================== 06 05 0x01 0x70 0x01 0x00 PCI Bridge (0x01a7,0x1014) 06 05 0x01 0x71 0x04 0x00 Ethernet (0x1079,0x8086) 06 05 0x01 0x71 0x04 0x01 Ethernet (0x1079,0x8086) 06 05 0x01 0x71 0x06 0x00 Ethernet (0x1079,0x8086) 06 05 0x01 0x71 0x06 0x01 Ethernet (0x1079,0x8086) LBA Cell 01 (02/03): Occupied PCI-X 133MHz Scan PCI: Rope Slot Seg Bus Dev Fun Card ==================================================================== 02 07 0x01 0x38 0x01 0x00 Fibre Channel (0x2422,0x1077) 02 07 0x01 0x38 0x01 0x01 Fibre Channel (0x2422,0x1077) CompleteLoading Clients ... Loading SAL_ABI ... (text) (data) Complete Loading ACPI ...... (text) (data) Complete Loading EFI ...... (text) (data) Complete(F)irst, (L)ast, (N)ext or , (P)revious, ^B to exit to menu 12125503 bytes free left in the Pal/Client blockStarting Clients ...Initializing ACPI tables ... Initializing FACS table (407f470028/40) Complete Initializing DBGP table (407f470068/34) Complete Initializing HPET table (407f4700a0/38) Complete Initializing GSP table (407f4700d8/74) Complete Initializing MADT table (407f470150/12c) Complete Initializing DSDT table (407f470280/27bb2) Complete Initializing SPMI table (407f497e38/50) Complete Initializing FADT table (407f497e88/f4) Complete Initializing SLIT table (407f497f80/35) Complete Initializing CPEP table (407f497fb8/5c) Complete Initializing SRAT table (407f498018/7e0) Complete Initializing HCDP table (407f4987f8/44) Complete Initializing SBCT table (407f498840/30) Complete Initializing XSDT table (407f498870/ec) Complete Initializing RSDP table (407f470000/24) CompleteACPI Initialization complete: table size = 166240 / 7995392 (2%)(F)irst, (L)ast, (N)ext or , (P)revious, ^B to exit to menu(F)irst, (L)ast, (N)ext or , (P)revious, ^B to exit to menu User assigned [Count]: 0 Monitor assigned [Count]: 1Cell-specific [Count]: Cell ID/Count [IO Details] 1.0.2 1.0.2.1.0.1.0.0.0.0.5 BOOT 1.0.6[Memory Details]ILM, user-assigned [Base /Range]: (bytes) (MB)ILM, monitor-assigned [Base /Range]: (bytes) (MB)ILM Total (MB): 2048 (Floating 0)ILM Granularity (MB): 256CLM, user-assigned [CellID Base /Range]:(F)irst, (L)ast, (N)ext or , (P)revious, ^B to exit to menu (bytes) (MB)CLM, monitor-assigned [CellID Base /Range]: (bytes) (MB)CLM (CellID MB): 1 958 (Floating 0)CLM Granularity (MB): 128[OL* Details]Sequence ID: N/AOperation: N/AStatus: N/Aroot@rx10a0vp [/root] vparboot -p vpar1vparboot: Booting vpar1. Please wait...root@rx10a0vp [/root][vpar1] Initializing IO Devices ...(F)irst, (L)ast, (N)ext or , (P)revious, ^B to exit to menu LBA Cell 01 (06/07): Occupied PCI-X 133MHz Scan PCI: Rope Slot Seg Bus Dev Fun Card ==================================================================== 06 05 0x01 0x70 0x01 0x00 PCI Bridge (0x01a7,0x1014) 06 05 0x01 0x71 0x04 0x00 Ethernet (0x1079,0x8086) 06 05 0x01 0x71 0x04 0x01 Ethernet (0x1079,0x8086) 06 05 0x01 0x71 0x06 0x00 Ethernet (0x1079,0x8086) 06 05 0x01 0x71 0x06 0x01 Ethernet (0x1079,0x8086) LBA Cell 01 (02/03): Occupied PCI-X 133MHz Scan PCI: Rope Slot Seg Bus Dev Fun Card ==================================================================== 02 07 0x01 0x38 0x01 0x00 Fibre Channel (0x2422,0x1077) 02 07 0x01 0x38 0x01 0x01 Fibre Channel (0x2422,0x1077) CompleteLoading Clients ... Loading SAL_ABI ... (text) (data) Complete Loading ACPI ...... (text) (data) Complete Loading EFI ...... (text) (data) Complete(F)irst, (L)ast, (N)ext or , (P)revious, ^B to exit to menu 12125503 bytes free left in the Pal/Client blockStarting Clients ...Initializing ACPI tables ... Initializing FACS table (407f470028/40) Complete Initializing DBGP table (407f470068/34) Complete Initializing HPET table (407f4700a0/38) Complete Initializing GSP table (407f4700d8/74) Complete Initializing MADT table (407f470150/12c) Complete Initializing DSDT table (407f470280/27bb2) Complete Initializing SPMI table (407f497e38/50) Complete Initializing FADT table (407f497e88/f4) Complete Initializing SLIT table (407f497f80/35) Complete Initializing CPEP table (407f497fb8/5c) Complete Initializing SRAT table (407f498018/7e0) Complete Initializing HCDP table (407f4987f8/44) Complete Initializing SBCT table (407f498840/30) Complete Initializing XSDT table (407f498870/ec) Complete Initializing RSDP table (407f470000/24) CompleteACPI Initialization complete: table size = 166240 / 7995392 (2%)(F)irst, (L)ast, (N)ext or , (P)revious, ^B to exit to menuInitializing SAL_ABI ... Assigning PDT to current fpar ... Complete Processing firmware memory tables ... Complete Relocating PAL ... Complete Processing platform I/O information ... Complete Building ESI Table ... Complete Loading ACPI tables ... Complete Building EFI memory table ... Complete Building PCI cache structure ... CompleteWelcome to EFI 2.0!EFI version 2.00 [14.62] Running on GenuineIntel Itanium(R) ProcessorEFI server rx7640 SAL [12:58:14] - HPLoading 'BRM5701_LAN'...Copyright (c) 2000-2005 Broadcom CorporationBroadcom NetXtreme Gigabit Ethernet EFI driver v7.0.11(F)irst, (L)ast, (N)ext or , (P)revious, ^B to exit to menudriver: Image BRM5701_LAN loaded at 407CE44000-407CE7E000. Returned SuccessLoading 'FPSWA'...driver: Image FPSWA loaded at 407CDD8000-407CE42000. Returned SuccessPciRom S=01 B=38 D=1 F=0 I=3 loaded at 781FBDCD000-781FBE00000HP PCI-X 2Port 4Gb Fibre Channel Adapter (driver 1.09, firmware 4.00.090)HP PCI-X 2Port 4Gb Fibre Channel Adapter (driver 1.09, firmware 4.00.090)POSSE Library is loading...EFI Shell UEFI version 2.00 [14.62]Device mapping table fs0 : Acpi(HWP0002,PNP0A03,102)/Pci(1|0)/Fibre(WWN50014380025D1898,Lun4005000000000000)/HD(Part1,Sig17396F58-65D4-11DE-8002-D6217B60E588) fs1 : Acpi(HWP0002,PNP0A03,102)/Pci(1|0)/Fibre(WWN50014380025D1898,Lun4005000000000000)/HD(Part3,Sig17396F94-65D4-11DE-8004-D6217B60E588) blk0 : Acpi(HWP0002,PNP0A03,102)/Pci(1|0)/Fibre(WWN50014380025D1898,Lun4005000000000000) blk1 : Acpi(HWP0002,PNP0A03,102)/Pci(1|0)/Fibre(WWN50014380025D1898,Lun4005000000000000)/HD(Part1,Sig17396F58-65D4-11DE-8002-D6217B60E588) blk2 : Acpi(HWP0002,PNP0A03,102)/Pci(1|0)/Fibre(WWN50014380025D1898,Lun4005000000000000)/HD(Part2,Sig17396F76-65D4-11DE-8003-D6217B60E588) blk3 : Acpi(HWP0002,PNP0A03,102)/Pci(1|0)/Fibre(WWN50014380025D1898,Lun4005000000000000)/HD(Part3,Sig17396F94-65D4-11DE-8004-D6217B60E588)EFI Boot Manager ver 2.00 [14.62] Loading device driversEFI Boot Manager ver 2.00 [14.62] Please select a boot optionOS might use only the primary console set via boot manager or conconfig command(F)i1/0/2/1/0.1.0.0.0.0.5 EFI Shell [Built*in] Boot Option Maintenance Menu Use ^ and v to change option(s). Use Enter to select an option Use > and < to view long descriptions Hot Key: 'S' or 's' to start the EFI ShellSelected boot option: 1/0/2/1/0.1.0.0.0.0.5Loading.: 1/0/2/1/0.1.0.0.0.0.5Executing Image: "\EFI\HPUX\HPUX.EFI"Optional Data : "\EFI\HPUX\HPUX.EFI boot /stand/vmunix"Starting: 1/0/2/1/0.1.0.0.0.0.5(C) Copyright 1999-2006 Hewlett-Packard Development Company, L.P.All rights reservedHP-UX Boot Loader for IPF -- Revision 2.029> System Memory = 2957 MBloading section 0.......................................................... (complete)(F)irst, (L)ast, (N)ext or , (P)revious, ^B to exit to menuloading section 1............... (complete)loading symbol tableloading System Directory (boot.sys) to MFS.....loading MFSFILES directory (/stand/bootfs) to MFS................Launching /stand/vmunixSIZE: Text:29426K + Data:7416K + BSS:5376K = Total:42219KConsole is on virtual consoleBooting kernel...Memory Class Setup-------------------------------------------------------------------------Class Physmem Lockmem Swapmem-------------------------------------------------------------------------System : 2957 MB 2957 MB 2957 MBKernel : 2957 MB 2957 MB 2957 MB(F)irst, (L)ast, (N)ext or , (P)revious, ^B to exit to menuUser : 2567 MB 2235 MB 2244 MB-------------------------------------------------------------------------Loaded ACPI revision 2.0 tables.NOTICE: cachefs_link(): File system was registered at index 4.NOTICE: nfs3_link(): File system was registered at index 7.NOTICE: mod_fs_reg: Cannot retrieve configured loading phase from KRS for module: cifs. Setting to load at INITBoot device's HP-UX HW path is: 1/0/2/1/0.1.0.0.0.0.5iether0: INITIALIZING HP AB545-60001 PCI/PCI-X 1000Base-T 4-port 1000B-T Adapter at hardware path 1/0/6/1/0/4/0iether1: INITIALIZING HP AB545-60001 PCI/PCI-X 1000Base-T 4-port 1000B-T Adapter at hardware path 1/0/6/1/0/4/1iether2: INITIALIZING HP AB545-60001 PCI/PCI-X 1000Base-T 4-port 1000B-T Adapter at hardware path 1/0/6/1/0/6/0iether3: INITIALIZING HP AB545-60001 PCI/PCI-X 1000Base-T 4-port 1000B-T Adapter at hardware path 1/0/6/1/0/6/1Logical volume 64, 0x3 configured as ROOTLogical volume 64, 0x2 configured as SWAPLogical volume 64, 0x2 configured as DUMP Swap device table: (start & size given in 512-byte blocks) entry 0 - major is 64, minor is 0x2; start = 0, size = 4194304Warning: time-of-day register time is out-of-range(F)irst, (L)ast, (N)ext or , (P)revious, ^B to exit to menuGetting time from file systemStarting the STREAMS daemons-phase 1 System Console is virtualChecking root file system.file system is clean - log replay is not requiredRoot check done.Create STCP device filesStarting the STREAMS daemons-phase 2 $Revision: vmunix: B11.23_LR FLAVOR=perf Fri Aug 29 22:35:38 PDT 2003 $Memory Information: physical page size = 4096 bytes, logical page size = 4096 bytes Physical: 3028248 Kbytes, lockable: 2064660 Kbytes, available: 2401688 Kbytes/sbin/ioinitrc:/dev/vg00/lvol1:file system is clean - log replay is not requiredlvlnboot: Warning: couldn't query physical volume "/dev/dsk/c4t0d5s2":The specified path does not correspond to physical volume attached tothis volume grouplvlnboot: Warning: couldn't query physical volume "/dev/dsk/c6t0d5s2":(F)irst, (L)ast, (N)ext or , (P)revious, ^B to exit to menuThe specified path does not correspond to physical volume attached tothis volume grouplvlnboot: Warning: couldn't query all of the physical volumes.lvlnboot: Warning: couldn't query physical volume "/dev/dsk/c4t0d5s2":The specified path does not correspond to physical volume attached tothis volume grouplvlnboot: Warning: couldn't query physical volume "/dev/dsk/c6t0d5s2":The specified path does not correspond to physical volume attached tothis volume grouplvlnboot: Warning: couldn't query all of the physical volumes./sbin/krs_sysinit: * The module 'rng' has been loaded. * The module 'dmpaa' has been loaded. * The module 'dmpaaa' has been loaded. * The module 'dmpap' has been loaded. * The module 'dmpapg' has been loaded. * The module 'dmpapf' has been loaded. * The module 'dmpjbod' has been loaded. * The module 'dmphpalua' has been loaded. * The module 'dmphdsalua' has been loaded.(F)irst, (L)ast, (N)ext or , (P)revious, ^B to exit to menu * The module 'fdd' has been loaded. * The module 'ipf' has been loaded.insf: Installing special files for ipmi instance 0 address 1/250/1/sbin/bcheckrc:Checking for LVM volume groups and Activating (if any exist)vgchange: Warning: Couldn't attach to the volume group physical volume "/dev/dsk/c4t0d5s2":The path of the physical volume refers to a device that does notexist, or is not configured into the kernel.vgchange: The path of the physical volume refers to a device that does notexist, or is not configured into the kernel.Volume group "/dev/vg00" has been successfully changed.vgdisplay: Warning: couldn't query physical volume "/dev/dsk/c4t0d5s2":The specified path does not correspond to physical volume attached tothis volume groupvgdisplay: Warning: couldn't query physical volume "/dev/dsk/c6t0d5s2":The specified path does not correspond to physical volume attached tothis volume groupvgdisplay: Warning: couldn't query all of the physical volumes.(F)irst, (L)ast, (N)ext or , (P)revious, ^B to exit to menuResynchronized volume group /dev/vg00Checking vxfs file systemsUX:vxfs fsck: INFO: V-3-20913: /dev/vg00/lvol3:sanity check: root file system OK (mounted read/write)UX:vxfs fsck: INFO: V-3-20915: /dev/vg00/lvol4:sanity check: /dev/vg00/lvol4 OKUX:vxfs fsck: INFO: V-3-20915: /dev/vg00/lvol5:sanity check: /dev/vg00/lvol5 OKUX:vxfs fsck: INFO: V-3-20915: /dev/vg00/lvol6:sanity check: /dev/vg00/lvol6 OKUX:vxfs fsck: INFO: V-3-20915: /dev/vg00/lvol7:sanity check: /dev/vg00/lvol7 OKUX:vxfs fsck: INFO: V-3-20915: /dev/vg00/lvol8:sanity check: /dev/vg00/lvol8 OKCleaning /etc/ptmp...(c)Copyright 1983-2003 Hewlett-Packard Development Company, L.P.(c)Copyright 1979, 1980, 1983, 1985-1993 The Regents of the Univ. of California(c)Copyright 1980, 1984, 1986 Novell, Inc.(c)Copyright 1986-2000 Sun Microsystems, Inc.(c)Copyright 1985, 1986, 1988 Massachusetts Institute of Technology(c)Copyright 1989-1993 The Open Software Foundation, Inc.(c)Copyright 1990 Motorola, Inc.(c)Copyright 1990, 1991, 1992 Cornell University(c)Copyright 1989-1991 The University of Maryland(c)Copyright 1988 Carnegie Mellon University(F)irst, (L)ast, (N)ext or , (P)revious, ^B to exit to menu(c)Copyright 1991-2003 Mentat Inc.(c)Copyright 1996 Morning Star Technologies, Inc.(c)Copyright 1996 Progressive Systems, Inc. RESTRICTED RIGHTS LEGENDUse, duplication, or disclosure by the U.S. Government is subject torestrictions as set forth in sub-paragraph (c)(1)(ii) of the Rights inTechnical Data and Computer Software clause in DFARS 252.227-7013. Hewlett-Packard Company 3000 Hanover Street Palo Alto, CA 94304 U.S.A.Rights for non-DOD U.S. Government Departments and Agencies are as setforth in FAR 52.227-19(c)(1,2)./sbin/auto_parms: DHCP access is disabled (see /etc/auto_parms.log)(F)irst, (L)ast, (N)ext or , (P)revious, ^B to exit to menu HP-UX Start-up in progress __________________________ Configure system crash dumps ........................................ OK Removing old vxvm files ............................................. OK VxVM INFO V-5-2-3360 VxVM device node check ......................... OK VxVM INFO V-5-2-3362 VxVM general startup ........................... OK VxVM INFO V-5-2-3366 VxVM reconfiguration recovery .................. OK Mount file systems .................................................. OK Remounting Root File System ......................................... OK Virtual Partitions Initialization ................................... OK Setting hostname .................................................... OK Start Kernel Logging facility ....................................... OK Set privilege group ................................................. N/A Display date ........................................................ N/A Save system crash dump if needed .................................... N/A Start evp ........................................................... OK Enable auxiliary swap space ......................................... OK Start syncer daemon ................................................. OK(F)irst, (L)ast, (N)ext or , (P)revious, ^B to exit to menu Start Utmp Daemon : manages User Accounting Database ................ OK Configuring USB-00 device special files ............................. OK Configure Loopback interfaces (lo0) ................................. OK VxVM INFO V-5-2-3370 VxVM volume recovery start ..................... OK Configuring all unconfigured software filesets ...................... OK Configuring PFIL .................................................... OK Starting IPFilter ................................................... OK Configuring Install Time Security ................................... N/A Recover editor crash files .......................................... OK Clean UUCP .......................................................... OK List and/or clear temporary files ................................... OK Clean up old log files .............................................. OK Start system message logging daemon ................................. OK Starting Virtual Partition Heartbeat Daemon ......................... OK Starting Virtual Partition Daemon ................................... OK Start pty allocator daemon .......................................... OK Configuring OLA/R interface ......................................... OK Start network tracing and logging daemon ............................ OK Configure HP igelan Gigabit Ethernet interfaces ..................... OK Configure HP iether 100BT/Gigabit Ethernet interfaces ............... OK(F)irst, (L)ast, (N)ext or , (P)revious, ^B to exit to menu Configure HP gelan Gigabit Ethernet interfaces ...................... OK Configure HP igssn Gigabit Ethernet interfaces ...................... OK Configure INTEL 100BASE-T interfaces ................................ N/A Create PCI FDDI device files. ....................................... OK Configure HP 100BASE-T interfaces ................................... N/A Configure VLAN interfaces ........................................... OK Configure LAN interfaces ............................................ OK Configure LAN interfaces for IPv6 ................................... OK Starting DHCPv6 Server daemon ....................................... N/A Configuring DHCPv6 Interfaces ....................................... OK Start name server daemon ............................................ N/A Starting Netscape Directory Server .................................. N/A Starting Netscape Administration Server ............................. N/A Starting Netscape Directory Server .................................. N/A Starting Netscape Administration Server ............................. N/A Starting HP-UX Secure Shell ......................................... OK Start NFS core subsystem ............................................ OK Start NIS+ server subsystem ......................................... OK Start NIS+ client subsystem ......................................... OK Start NIS server subsystem .......................................... OK(F)irst, (L)ast, (N)ext or , (P)revious, ^B to exit to menu Start ldap client daemon ............................................ N/A Start NIS/LDAP server subsystem ..................................... N/A Start NIS client subsystem .......................................... OK Start NFS client subsystem .......................................... OK Start the Trusted Mode with NIS+ subsystem .......................... N/A Start multicast routing daemon ...................................... N/A Start Internet services daemon ...................................... OK Start dynamic routing daemon ........................................ N/A Start router discover protocol daemon ............................... N/A Configuring PPP Interface ........................................... OK Configuring PPPoE ................................................... N/A Start RARP protocol daemon .......................................... N/A Start remote system status daemon ................................... N/A Configuring HPVM Host AVIO Storage Software ......................... OK Start IPv6 router advertisement daemon .............................. N/A Starting mail daemon ................................................ OK Starting cfengine's cfservd daemon .................................. N/A Starting syslog-ng daemons .......................................... N/A Starting outbound connection daemons for DDFA software .............. N/A Starting sfmdb PostgreSQL daemons ................................... OK(F)irst, (L)ast, (N)ext or , (P)revious, ^B to exit to menu Start SNMP Master Network Management daemon ......................... OK Start OSPF MIB Network Management subAgent .......................... N/A Start SNMP HP-UNIX Network Management subAgent ...................... OK Start SNMP IPv6 Network Management subAgent ......................... OK Start SNMP MIB-2 Network Management subAgent ........................ OK Start Native Adapter Agent .......................................... N/A Start SNMP Trap Dest Network Management subAgent .................... OK Start HA cluster SNMP subagent ...................................... OK Start DCE daemons ................................................... N/A Start SNMP PCI FDDI Network Management subAgent ..................... OK Start RPC daemon if needed .......................................... OK Start CIM cimserver subsystem ....................................... OK Initialize Instant Capacity ......................................... N/A Starting ISEE hpservices mad daemon. ................................ N/A Start Runner ........................................................ N/A Starting X Font Server at TCP port 7000 ............................. N/A Start vt daemon ..................................................... N/A Start time synchronization .......................................... N/A Start accounting .................................................... N/A Install/Load XF86 DLKM Helper Modules ............................... N/A(F)irst, (L)ast, (N)ext or , (P)revious, ^B to exit to menu Starting the password/group assist subsystem ........................ OK Starting HP Disk Array Manager daemons. ............................. OK Start print spooler ................................................. N/A Start clock daemon .................................................. OK Check Security Bulletin Compliance .................................. N/A Start diagnostic subsystem .......................................... OK Start environment monitoring daemon ................................. OK Start auditing subsystem ............................................ N/A Start audio server daemon ........................................... N/A Start USB hub daemon ................................................ OK SAM System administration configuration ............................. OK PA performance software is being started. ........................... OK Configure PRM -or- Configure and Enable PRM ......................... N/A Start Workload Manager subsystem .................................... N/A Initialize Software Distributor agent daemon ........................ OK Starting the System Management HomePage server ...................... OK Starting the gWLM Agent ............................................. N/A Starting CIFS Client ................................................ N/A Configure HP RAID SA interfaces ..................................... N/A Copy processor logs to /var/tombstones .............................. OK(F)irst, (L)ast, (N)ext or , (P)revious, ^B to exit to menu Creating any missing lvm configuration backups ...................... OK Starting Event Monitoring Service ................................... OK Start EMS SNMP subagent ............................................. OK Configure HP Fibre Channel Mass Storage interfaces .................. OK Configure for Java .................................................. OK Configuring Ultra320 SCSI Mass Storage interfaces ................... N/A Starting the Winbind Daemon ......................................... N/A Configuring HP SerialSCSI SASD Mass Storage interfaces .............. OK Starting the RST EMS listener ....................................... N/A Configuring HPVM AVIO Mass Storage interfaces ....................... OK Configure HP Fibre Channel Tachyon TL/TS Mass Storage interfaces .... OK Configuring HP Fibre Channel FCD Mass Storage interfaces ............ OK Configuring HP Fibre Channel FCLP Mass Storage interfaces ........... OK VxVM VVR INFO V-5-2-3502 Starting Communication Daemon .............. N/A VxVM VVR INFO V-5-4-2409 Starting VRAS daemon ....................... N/A VxVM VVR INFO V-5-4-2409 Starting VxRSync daemon .................... N/A Starting VERITAS Enterprise Administrator Service (vxsvc) ........... OK Start NFS server subsystem .......................................... OK Start X print server(s) ............................................. N/A Start Highly Available cluster ...................................... N/A(F)irst, (L)ast, (N)ext or , (P)revious, ^B to exit to menu Starting HP-UX Apache-based Web Server .............................. N/A Starting HP-UX Tomcat-based Servlet Engine .......................... N/A Starting HP-UX Webmin-based Admin ................................... N/A Starting the HPUX Webproxy subsystem ................................ N/A Starting HP-UX XML Web Server Tools ................................. OK Start kwdbd ......................................................... N/A Validating HP Virtual Machine Configuration ......................... N/A Starting OVTrcSrv... ................................................ OK Start CDE login server .............................................. OK Starting the amgrd subsystem ........................................ N/A Starting PRNGD (Pseudo Random Number Generator Daemon) .............. N/A Starting Control Daemon ............................................. N/AThe system is ready.GenericSysName [HP Release B.11.23] (see /etc/issue)Console Login: rootPassword:Please wait...checking for disk quotas(c)Copyright 1983-2003 Hewlett-Packard Development Company, L.P.(F)irst, (L)ast, (N)ext or , (P)revious, ^B to exit to menu(c)Copyright 1979, 1980, 1983, 1985-1993 The Regents of the Univ. of California(c)Copyright 1980, 1984, 1986 Novell, Inc.(c)Copyright 1986-2000 Sun Microsystems, Inc.(c)Copyright 1985, 1986, 1988 Massachusetts Institute of Technology(c)Copyright 1989-1993 The Open Software Foundation, Inc.(c)Copyright 1990 Motorola, Inc.(c)Copyright 1990, 1991, 1992 Cornell University(c)Copyright 1989-1991 The University of Maryland(c)Copyright 1988 Carnegie Mellon University(c)Copyright 1991-2003 Mentat Inc.(c)Copyright 1996 Morning Star Technologies, Inc.(c)Copyright 1996 Progressive Systems, Inc. RESTRICTED RIGHTS LEGENDUse, duplication, or disclosure by the U.S. Government is subject torestrictions as set forth in sub-paragraph (c)(1)(ii) of the Rights inTechnical Data and Computer Software clause in DFARS 252.227-7013.(F)irst, (L)ast, (N)ext or , (P)revious, ^B to exit to menu Hewlett-Packard Company 3000 Hanover Street Palo Alto, CA 94304 U.S.A.Rights for non-DOD U.S. Government Departments and Agencies are as setforth in FAR 52.227-19(c)(1,2).You have mail.Value of TERM has been set to "vt100".WARNING: YOU ARE SUPERUSER !!root@rx10avp1 [/]# vparstatusvparstatus: Warning: Command version is different from monitor version. Some fields may not be displayed.[Virtual Partition] BootVirtual Partition Name State Attributes Kernel Path Opts============================== ===== ============ ======================= =====vpar0 Up Dyn,Auto,Nsr /stand/vmunix(F)irst, (L)ast, (N)ext or , (P)revious, ^B to exit to menuvpar1 Up Dyn,Auto,Nsr /stand/vmunix[Virtual Partition Resource Summary] CPU Num Num Memory GranularityVirtual Partition Name Min/Max CPUs IO ILM CLM============================== ======= ==== ==== ========== ==========vpar0 1/ 4 1 3 256 128vpar1 1/ 4 1 3 256 128 Memory (MB) ILM CLM # User # UserVirtual Partition Name Ranges/MB Total MB Ranges/MB Total MB============================== ====================== ======================vpar0 0/ 0 3072 0/ 0 1024vpar1 0/ 0 2048 0/ 0 958root@rx10avp1 [/]# vparstatus -p vpar1vparstatus: Warning: Command version is different from monitor version. Some fields may not be displayed.(F)irst, (L)ast, (N)ext or , (P)revious, ^B to exit to menu[Virtual Partition] BootVirtual Partition Name State Attributes Kernel Path Opts============================== ===== ============ ======================= =====vpar1 Up Dyn,Auto,Nsr /stand/vmunix[Virtual Partition Resource Summary] CPU Num Num Memory GranularityVirtual Partition Name Min/Max CPUs IO ILM CLM============================== ======= ==== ==== ========== ==========vpar1 1/ 4 1 3 256 128 Memory (MB) ILM CLM # User # UserVirtual Partition Name Ranges/MB Total MB Ranges/MB Total MB============================== ====================== ======================vpar1 0/ 0 2048 0/ 0 958