volvo c30 c70 & xc90 volvo navigation system...

VOLVO C30, C70 & XC90

VOLVO NAVIGATION SYSTEM (VNS) Web Edition

OPERATING MANUAL

G033441

Types of roads Color

Freeways Green

Main roads Red

Secondary main roads Brown

Normal roads Dark gray

Local roads Dark green

Text and symbols on the screen

Area to be avoided

Distance to the next guidance point

Direction to take at next guidance point

Type of junction

Intermediate destination

Name of next street or road

Next guidance point

Stored location

Symbol for a Point of Interest POI (Gas station)

Remaining time to destination

Remaining distance to destination

Map scale

Route

Current road

Final destination

Famous landmarks

The vehicles current location

Completed section of the route

Starting point

Traffic information

Outer ring of compass direction to destination

Compass

VOLVO NAVIGATION SYSTEM (VNS) WITH RTTVNS is a navigation system developed by Volvo, which is designedto help guide you to the destination of your choice and provide infor-mation along the way.

RTT1 (Real Time Traffic) is an information system developed by Volvo,which can detect roads/streets with traffic disruptions and make itpossible to select an alternative route past the problem area.

The system includes features that enable you to set itineraries, searchfor certain types of points of interest along your route, store specialdestinations, obtain traffic informaton en route, etc.

The system indicates the vehicles current location, and shows partor all of the route to your destination, depending on the settings youhave made. If at any time you should decide to deviate from the routeoriginally set by the system, a new route to the destination will auto-matically be calculated.

By enabling you to reach your destination quickly and by the mostdirect route, Volvo's navigation system also helps contribute toimproving the environment.

NAVTEQ DATABASE End-User License Agreement

See the information on page see page 82.

1 Option. Not available in all markets.

Contents

2

0101 Getting to know the

navigation systemThis manual................................................. 8Before you start.......................................... 9Navigation system, updating and care..... 11C30 system overview................................ 12S40 system overview................................ 14V50 system overview................................ 16C70 system overview................................ 18XC90 system overview.............................. 20Navigation system controls...................... 22On-screen keypad.................................... 23Display and voice guidance...................... 24Unverified roads and Compass................ 26Menu selections........................................ 27 02

02 Easy user modeMain menu, Shortcut menu, Scroll menu. 32Menu selections........................................ 33Setting a destination................................. 34Show/Remove destination........................ 37Settings..................................................... 38

0303 Advanced user modeMain menu, Shortcut menu...................... 42Map scroll menu....................................... 45Menu selections........................................ 46Setting a destination................................. 48Itinerary..................................................... 53Next destination........................................ 55Current position........................................ 56Traffic information (option)........................ 57Settings..................................................... 58System simulation..................................... 62

Contents

3

0404 Traffic informationIntroduction............................................... 66Avoiding traffic problems ......................... 67Selecting information................................ 69Reading information.................................. 70

0505 Symbols on the mapRoad numbers and Points of interest....... 74

0606 Questions & answersFrequently asked questions...................... 80EULA End User License Agreement...... 82

Contents

4

0707 IndexIndex......................................................... 86

Contents

5

G02

8780

6

This manual............................................................................................... 8Before you start........................................................................................ 9Navigation system, updating and care................................................... 11C30 system overview.............................................................................. 12S40 system overview.............................................................................. 14V50 system overview.............................................................................. 16C70 system overview.............................................................................. 18XC90 system overview............................................................................ 20Navigation system controls..................................................................... 22On-screen keypad.................................................................................. 23Display and voice guidance.................................................................... 24Unverified roads and Compass.............................................................. 26Menu selections...................................................................................... 27

GETTING TO KNOW THE NAVIGATION SYSTEM

01 Getting to know the navigation system

This manual 01

8

Using this manualThe manual is divided into chapters describingthe various features and functions of the navi-gation system.

A section dealing with common questions andanswers, and an index, can be found at the endof the manual.

Menu selections/PathsMenu selections are shown in gray text in thismanual, for example:

Set destination Address City

Changes in the manualThe specifications, design features, and illus-trations in this manual are not binding. Wereserve the right to make modifications withoutprior notice.

2009 Volvo Car Corporation


Before you start 01

9

IntroductionThe VNS system can be used even if a desti-nation has not been selected.

The vehicles current route will be shown on thescreen and the vehicles position will be indi-cated by a blue arrow on the map.

The systems contents may vary from state tostate, and not all menu selections may be avail-able for technical reasons.

Start up

The system starts up by displaying text on thescreen that must be confirmed by pressingENTER after you have selected to use eitherEasy mode or Advanced mode.

Map modeWhen the system has started, the screen willdisplay the main menu briefly before enteringMap mode. A map of the vehicle's current loca-tion will then be displayed.

Press BACK to display the main menu. Press ENTER to activate the shortcut

menu.

Press the navigation control to activateMap scroll mode, for example to see partsof the map that are outside of the screenarea.

Pressing ENTER in this mode activates theMap scroll menu, see page 32.

On/Off

ONThe ignition must be in position I or II in orderto operate the system (refer to the vehiclesowners manual).

Press ENTER or BACK.The screen will slide up from the dashboardautomatically. It may take several seconds forthe system to determine the vehicles locationand direction.

Off1. Use the navigation control to go to Shut

down.

2. Press ENTER (press BACK to go to themain menu before shutting down).

The screen will retract automatically into thedashboard.

NOTE

The system can be used even if the engineis not running. It should be turned off whennot in use to help avoid battery drain.

SettingsThe system is provided with default settings,but it will start with the settings that were mostrecently used.

If a setting is changed and you wish to returnto the default setting, only the currentlyselected function will be affected.

There is no global reset function to return allsettings to default.


Before you start 01

10

Easy/Advanced modesWhen the navigation system is started, thedesired user mode can be selected.

EasyOnly the primary menus are available in thismode, and can be used to simply get directionsfrom point A to B.

AdvancedThis mode makes all settings and functionsavailable.

Switching between modesSwitching between modes can be done inSettings.

NOTE

Settings made in Easy mode are not used ifthe system is switched to Advanced mode,and vice versa. Settings are stored in themode in which they were made.

Demo (simulated guidance)The navigation system contains a function thatdemonstrates guidance to a destination. How-ever, please be aware that the demo can onlybe run when the vehicle is at a standstill.

This function is only available when VNS is inAdvanced mode, see Demo on page 62.


Navigation system, updating and care 01

11

Contents of the main unitAll map information is stored on the main unitshard drive. There is no DVD in the unit when itis delivered. The DVDs are used for anyupdates to system or map information, see theinstructions of the DVDs cover.

New DVDs are issued on a regular basis withupdated and new information. The latest DVDscan be purchased from a Volvo retailer.

Volvo cannot be responsible for the accuracyor completeness of data, maps, or routingguidance presented by your navigation sys-tem. Please contact the map developer, Nav-Teq at www.navteq.com.

NOTE

The main units DVD player is intended forVolvo DVDs only.

Updating with a DVD

NOTE

Please note that an update may take up to90 minutes. Be sure the vehicles battery isadequately charged before beginning.

If a DVD contains new system software in addi-tion to map information, the system will beginby running the software installation.

The vehicle can be driven while the navigationsystem is being updated, but VNS cannot beused while the update is in progress.

To perform an update:

1. Switch on the navigation system.

2. Remove a DVD if one is already inserted inthe systems DVD player.

3. Insert the DVD containing the updatedinformation. If there is more than one disc,insert them in the numbered order.

4. The system will now be automaticallyupdated. Information will be displayed toshow update progress.

5. After the update, the DVD containing themost recent update must remain in thesystems DVD player. If more than one dischas been used, insert disc 1. If the disc isremoved from the player, the navigationsystem will stop functioning.

If the system is switched off while an update isin progress, the update will be resumed thenext time the system is switched on.

In certain cases, updating map information willadd new system functions.

The VNS start screen will be displayed whenupdating is completed.

DVD care When changing discs, make sure that they

are kept free of oil, grease and other impur-ities.

The discs must not be exposed to mois-ture.

The discs must be kept in their packagingwhen not in use. Avoid storing discs inexcessive heat, direct sunlight or in a dustyenvironment.

Screen careClean the display screen with a soft, non-staticcloth or a moist paper towel and a mild windowcleaning agent.

Never use petroleum based solvents or abra-sive substances when cleaning the screen.


C30 system overview 01

12

G01

9631



13

Main unitThe main unit contains a hard drive, a DVDplayer (for navigation system map discs only)and an integrated GPS (Global PositioningSystem) receiver and a TMC (Traffic MessageChannel) receiver.

The main unit has the following functions:

Calculates the vehicles current position Calculates the route to the selected desti-

nation

Processes traffic information Provides voice guidance Stores map data Uses the DVD player to update map data

and system software

GPS receiverThe navigation system uses GPS signals, thevehicles speedometer and a gyroscope todetermine the vehicles current location anddirection.

Traffic information TMC (option)1TMC is a standardized code system for trans-mitting traffic information. The receiver auto-matically tunes to the correct frequency andreception is handled by the audio systems FMantenna.

The area covered by the system is being stead-ily expanded, which makes occasionalupdates necessary, see page 11.

Regardless of whether the navigation systemis in Easy or Advanced mode, broadcast traf-fic information is always received and presen-ted. see page 66 for additional information.

SpeakersSound from the navigation system comesthrough the audio systems front speakers.

Navigation controlSee page 22.

ScreenThe screen displays the maps and providesdetailed information on intersections, dis-tances, etc. See page 11 for information oncaring for the screen.

IR port for the remote controlSee page 22.

1 Not available in all markets.


S40 system overview 01

14

G01

9632


S40 system overview 01

15




nation


and system software











V50 system overview 01

16

32 4

1

5

G01

9633


V50 system overview 01

17




nation


and system software












18

1

2 3

4

5



19




nation


and system software











XC90 system overview 01

20


XC90 system overview 01

21




nation


and system software











Navigation system controls 01

22

Location of the navigation control andIR port

G019916

The navigation system can be operated withthe steering wheel-mounted navigation controlor with the remote control.

The navigation control is located on the right,rear side of the steering wheel.

Point the remote toward the IR port located atthe screen (only the XC90 has the IR port onthe audio system as shown above).

NOTE

The remote control runs on AAA or R03 bat-teries. Check the batteries if the remotedoes not function properly.

Navigation control/remote control

The navigation control and remote control havethe same functions. Each enables you to nav-igate through the menus and make settings/selections.

Use the navigation control to moveamong various menu alternatives or tomove the cross hairs on the map. The but-tons , , and on the remotecontrol can be used for the same purpose.

ENTER Confirms or activates selections.

BACK Press this key to go to the previousmenu or to undo a selection.

NOTE

The exact design of the navigation controlmay vary from model to model.

"Do not disturb"

In certain situations, the system may need afew extra seconds to calculate a route. A sym-bol will be displayed while this is taking place.

NOTE

While the route calculation symbol is dis-played, the navigation system cannotaccept any commands from the navigationcontrol, or the ENTER or BACK buttons.


On-screen keypad 01

23

Entering letters and selectingalternatives

G03

3459

The on-screen keyboard is used in many sit-uations in the menus to select specific infor-mation such as points of interest, a state/city/street address/zip code, etc.

Select letters with the navigation controland press ENTER.

When there are no further alternatives, theentire name will be displayed automatically.

The list at the bottom of the screen shows thefirst three possible alternatives made availableby the letters that have been entered.

1. You can also go directly to the list of namesby pressing .

2. Select a name and press ENTER.

The scroll bar at the right of the screen indi-cates that there are more alternatives than canbe displayed at one time.

The figure shown indicates the number ofnames on the list.

Press BACK to exit the list of names. You can also press BACK to delete letters

one at a time

General searchesSearches can be made at any time and alwaysfunction in the same way, regardless of whereyou may be in the menu system when a desti-nation is selected.

Pressing ENTER while keying in charactersdisplays all result combinations for the respec-tive selections: City, Street, Points of interest,etc.

For example, when searching for NewarkAirport, all combinations of Newark will bedisplayed when NE is entered. As the searchbecomes more specific, fewer alternatives willbe displayed, making selection easier.

A search beginning with NE will also display,for example, NEwmaket restaurant since allalternatives containing a number of words sep-arated by spaces are included in the search.


Display and voice guidance 01

24


Display and voice guidance 01

25

Display appearanceThe screen display is determined by factorssuch as geographic location and settings thathave been made, such as map scale, the sym-bols selected to be displayed, etc.

An explanation of the text, signs, and symbolsthat may be displayed on the screen can befound on the inside of the front cover of thismanual.

On a highway. The screen will display thepoints of interest along the highway. Thisfunction is available even if a destinationhas not been selected. A scroll list at theright indicates that there are additionalalternatives.

Detailed map showing intersections. Thescreen will display lanes on the road to helpyou select the correct one at the next inter-section. This function is only available onmajor roads. Voice guidance is also alwaysprovided.

Two maps have been selected inSettings. Both sections of the screen dis-play the same map, but with differentscales, see p. 38 for more information.

Map scroll mode.

Voice guidanceAfter a destination and guidance has started, avoice message indicating the action to betaken and distance will be provided as youapproach an intersection, exit, etc. A detailedmap of the intersection will also be displayed.The message will be repeated as you comecloser to the intersection.

The upper row on the screen shows the dis-tance to the next exit or turn, and the name ofthe exit.

The next row provides road sign information. Ifthe number of the road or exit, or the name ofthe exit are available, this information will alsobe displayed.

The vehicles current location is shown at thebottom of the screen.

Toll boothsWhen driving on toll roads, you will receivevoice notification as you approach toll booths.

This message will only be provided if a desti-nation has been selected.

NOTE

Toll booths are shown on the map but can-not be searched for as points of interest.


Unverified roads and Compass 01

26

Unverified roadsA small number of roads in the system may beunverified. This means that information onsigns, one-way streets, left turns, etc., may notbe accurate. An itinerary containing unverifiedroads will be displayed with gray arrowsinstead of the usual yellow ones.

The system provides information when anunverified road is added to an itinerary andwhen the vehicle begins to travel on one ofthese roads.

WARNING

Always use good judgment when followingnavigation system guidance, and do not fol-low guidance that seems contrary to yourown best judgment.

Never use the navigation system or anyother feature in your vehicle in a way thatdistracts you from the task of driving safely.Distraction can lead to a serious accident.

Set and make changes in your navigationsystem only with the vehicle parked.

Be aware of the current traffic situation.

Always comply with relevant traffic regula-tions.

CompassThe compass can be dis-played in two ways:

With north always at the topof the screen.

With the vehicle's currentdirection at the top of the

screen.

The red point of the compass needle pointsnorth on the map.

The gray destination arrow in the outer ring ofthe compass points toward the destination.

Go to Map Options under Settings to changethe way in which the compass is displayed orto hide it.


Menu selections 01

27

Menus on two levels Easy mode

Set destination

Address

Points Of Interest (POI)

Last 20

Point on map

Show destination

Remove destination

Settings

Guiding voice

Guiding volume

Language

Color

Map view

Distance unit

User mode

Shut down

For information on all of the menu alternativesin Easy mode, see page 33.

Menus on two levels Advanced mode

Set destination

Address


Stored locations

Last 20

Return trip

Point on map

Latitude/longitude

Itinerary

Start guidance

Add to itinerary

Route options

Clear itinerary

Next destination

Current position


Menu selections 01

28

Settings

Traffic information

Route options

Map options

Guiding options

System options

Start demo

Shut down

For information on all of the menu alternativesin Advanced mode, see page 46.


01

29

G029194

30

Main menu, Shortcut menu, Scroll menu............................................... 32Menu selections...................................................................................... 33Setting a destination............................................................................... 34Show/Remove destination...................................................................... 37Settings................................................................................................... 38

EASY USER MODE

02 Easy user mode

Main menu, Shortcut menu, Scroll menu

02

32

IntroductionThe navigation system starts in Easy usermode.

The most important menus are available in thismode, which makes things easier if changes inSettings are not often made.

Main menu

G03

3469

The main menu is at the top of the menu struc-ture and can be accessed by pressing theBACK key several times.

Switching between settingsTo switch between Easy and advanced modes,go to Settings System options Usermode.

Shortcut menu

G029190

This menu offers icons for making quick settingchanges.

Press ENTER in map mode and select asub-menu with or .

G028755 Map scale/Current route

Change the map scale for a larger perspectiveor to display greater detail.

At the top of the menu, you can choose to seeeither the remainder of the route1to the desti-nation from your current location, or the entireroute.

The map scale can be changed from 1/32 of amile to 60 miles. Hold the button down until themap scale of your choice is displayed, andrelease the button.

G028755 Guidance

Press ENTER to repeat voice guidance.

Traffic information (option)2Regardless of whether the navigation systemis in Easy or Advanced mode, broadcast traf-

fic information is always received and presen-ted. see page 66 for additional information.

Scroll menu

G03

3467

Activate map scrolling by pressing thenavigation control.

Press ENTER in scroll mode to activate theScroll menu.

ScaleThis function changes the scale of the area inwhich you are currently driving. The scale canbe changed from 150 ft to 60 miles.

Set as destinationSelect a position on the map. Guidance willbegin immediately.

1 A destination must be selected.2 Not available in all areas.

02 Easy user mode

Menu selections

02

33

Three levels of the menu structure are shownhere. A number of the third level menus alsohave sub-menus, which are described in detailin their respective sections in this manual.

Set destination

Address

State/City/Number/Street/Interse.

p. 34

Points Of Interest (POI) p. 35

Last 20 p. 35

Point on map p. 36

Show destination p. 37

Remove destination p. 37

Settings

Guiding voice

Female/Male

p. 38

Guiding volume

Off/1/2/3/4/5

p. 38

Language

US English/Espanol/Francais CAN

p. 38

Color

Black/Chrome/Blue/Dark

p. 38

Map view

2D/3D

p. 38

Distance unit

Km/Miles

p. 38

User mode

Easy/Advanced

p. 38

Shut down p. 9

02 Easy user mode

Setting a destination

02

34

Selecting an address

Set destination Address

Selecting a street addressThe system will place the cursor on Street. Themost recently selected State and City will bepre-selected.

1. To change the state or city, use thenavigation control to move to State and/or City.

2. Press ENTER, or choose among the mostrecently chosen alternatives with .

NOTE

The definition of a city or area may vary. Itwill sometimes be an entire city, or a partic-ular section of a city.

The system does not contain streetaddresses for very small towns or villages.In these cases, the center of the town isused as the destination.

Alternative 1 Select Street without choosing a city.The system will provide guidance to the mid-point of the selected street. If the street existsin more than one city, a list of alternatives willbe displayed.

Alternative 21. Begin by selecting a City.

2. Select a Street.

Selecting a street numberIf the address selected has a street number,this can be used as a specific destination.

1. After selecting a street, go to theNumber row and press ENTER

or

Go directly to Set. Alternative street num-bers will be displayed.

2. Go to Set after you have entered a streetnumber.

If a street number has not been entered,the system will guide you to the mid-pointof the selected street.

SetConfirms the entered number.

UndoReturns to the previous screen.

Selecting an intersection Go to Interse. and choose a street that

intersects the selected street.

Start guidance Go to Start guidance to begin receiving

directions to the destination.

02 Easy user mode


02

35

Search using a Zip code


Instead of searching in a city, you can opt tosearch for an areas Zip code.

1. Go to ZIP code and press ENTER.

2. Select the digits in the Zip code and pressENTER

or

Select a Zip code from the list.

3. Go to Street to select a street with the Zipcode entered and press ENTER.

4. Go to Start guidance to begin receivingdirections to the destination.

NOTE

This also applies to searches using Pointsof interest.

Point of Interest (POI)

Set destination Points of interest

Points of interest include gas stations, hotels,restaurants, Volvo retailers, hospitals, parkinglots, etc.

1. Highlight menu alternative POI.

2. Press ENTER to access a sub-menu withdifferent search options in order to select apoint of interest.

3. Go to Type, press ENTER.

4. Select a POI from the list provided, pressENTER.

5. In the list All names, select a name fromthe list.

6. Press ENTER to display all informationabout the selected POI.

7. Press ENTER to start guidance.

Last 20

Set destination Last 20

This is a list of the twenty most recentlyselected destinations. The scroll bar at the rightof the screen indicates that there are morealternatives than can be displayed at one time.

Go to the desired destination and press or ENTER to access the sub-menu.

02 Easy user mode


02

36

Set as destinationAdds the destination to the itinerary.

Delete locationRemove the destination from the Last 20 list.

Point of the map

Set destination Point on map

1. Use the Arrow keys to move the cursor tothe desired destination, press ENTER toaccess the map scroll menu.

2. Select Set as destination and pressENTER.

NOTE

A position on the map can be selecteddirectly with the cursor by using the Arrowkeys in map mode.

02 Easy user mode

Show/Remove destination

02

37

Show the destination on the map

Show destination

Press ENTER for an overview on the mapof the area that you have selected as yourfinal destination.

Remove the destination

Remove destination

1. Press ENTER and go to the destination tobe deleted.

2. Press ENTER again.

02 Easy user mode

Settings

02

38

Guiding voice

Settings Guiding voice

Select a male or female voice for directions.

Guiding volume

Settings Guiding volume

Set the volume level for voice guidance or turnoff this function.

Language

Settings Language

Select the language for menus, text and voicemessages.

Colors

Settings Color

There are 4 screen settings that can be made choose the one that you prefer.

Two-dimensional (2D) or three-dimensional (3D)

Settings Map view

The map can be displayed in 2D (viewedstraight from above) or in 3D (an angled viewfrom above).

Distance unit

Settings Distance unit

Choose between miles and kilometers.

User mode

Settings User mode

Switch between the Easy and Advanced usermodes.

02 Easy user mode

02

39

G029196

40

Main menu, Shortcut menu..................................................................... 42Map scroll menu..................................................................................... 45Menu selections...................................................................................... 46Setting a destination............................................................................... 48Itinerary................................................................................................... 53Next destination...................................................................................... 55Current position...................................................................................... 56Traffic information (option)...................................................................... 57Settings................................................................................................... 58System simulation................................................................................... 62

ADVANCED USER MODE

03 Advanced user mode

Main menu, Shortcut menu

03

42

IntroductionThe Advanced user mode can be selectedwhen the navigation system starts.

This mode provides access to all of the sys-tems settings and functions.

Main menu

G03

3461

The main menu is at the top of the menu struc-ture and can be accessed by pressing theBACK key several times.

Switching between settingsTo switch between Easy and advanced modes,go to Settings System options Usermode.

Shortcut menu

G029190

This menu offers icons for making quick settingchanges.

Press ENTER in map mode and select asub-menu with or .

Most system settings can be made inSettings in the main menu while the remainingones can only be made in the Shortcut menu.

Quick storage of the current positionIt is possible to store the vehicle's current loca-tion on the map by simply pressing one button.

Press and hold ENTER: press the buttonuntil the screen changes appearance.

The newly stored location will be indi-cated by this symbol. The information

linked to this position can be edited by goingto Stored location Adjust, see page 54.

G028755 Map scale/Current route

A menu with 4 alternatives will be displayed.

Pressing ENTER on the first alternative dis-plays a map showing the remainder of theroute 1 from the vehicle's current location to thedestination.

Pressing ENTER on the second alternative dis-plays a map showing the entire route1.

Pressing ENTER on the alternatives (+) or ()changes the map scale in different steps from1/32 of a mile to 60 miles to make it possibleto see either a larger perspective or greaterdetail.

The map scale can be changed freely by hold-ing down ENTER until you see the scale of yourchoice.

If you have chosen to display two maps, themap scale symbol is displayed at both ends ofthe Shortcut menu to make it possible to adjustthe maps scales individually.

G028755 Guidance

Press ENTER for guidance or to repeat voiceguidance.

G028755 Map/Route

Route outlineA list of coming guidance points. In addition tothe name of the road or street, the distancebetween guidance points and an arrow show-ing the type of action to be taken will be dis-played.

1 A destination must be selected



03

43

One map/Two mapsChoose to display either one or two maps ofthe area in which you are traveling.

Surveillance2This function makes it possible to store mapviews of 3 different areas for surveillance, suchas ones with heavy traffic, road constructionareas, etc.

Select Surveillan. 1, 2 or 3 to view previouslyset surveillance areas, see page 45.

G028755G028755 Detour

This displays a menu with Avoid and the avail-able alternatives. 1-3-6-12-25-50 miles.

Avoid streets/roadsThis function removes streets or roads from aset itinerary to help you avoid driving throughroad construction areas, etc.

1. Select Avoid in the Detour menu andpress ENTER. A list of streets included inyour route will be displayed.

2. Go to the street to be avoided and pressENTER.

3. Select other streets with or andpress ENTER.

Whenever possible, the system will thencalculate a new route that will guide youback to the original one after you havepassed the area(s) to be avoided.

Avoid next 50 milesThis function enables you to avoid an entirearea in the original itinerary, for example toavoid a city during rush hour..

Select an alternative in the Detour menu50 miles and press ENTER.

Whenever possible, the system will then cal-culate a Detour that will guide you back to theoriginal route after you have passed the area(s)to be avoided.

It is also possible to avoid a certain area bydrawing a box directly on the map, see Avoidspecified areas under

Settings Route options

on page 58.

G028755G028755 Traffic information (option)3

Choose to read information on traffic disrup-tions in the area displayed on the screen.

A change in map scale also changes the num-ber of messages displayed, see page 32, seepage 42 or see page 70.

Read messageScroll among the messages displayed on thescreen.

Show allDisplay all messages.

Hide allDo not display traffic messages.

Show selectedSelect the types of traffic messages to be dis-played on the map.


G028755G028755 Points of interest (POI)

Displays a menu with different ways of search-ing for a point of interest.

Around the carPressing ENTER makes it possible to searchfor POIs around the vehicle.See page 49.

2 Only available in areas with TMC reception.3 Not available in all areas.



03

44

Along the routePressing ENTER makes it possible to searchalong the route. See page 49.

Along HWYPressing ENTER makes it possible to searchalong the highway on which you are currentlydriving.

Choose to search for rest areas, gas stations,restaurants, etc., that are easy to access fromthe highway.

If a route crosses a number of highways, thesystem will search along the highway on whichyou are traveling.


Map scroll menu

03

45

Map scroll menu

G03

3468

1. Activate map scrolling with the navigationcontrol.

2. Press ENTER in scroll mode to display thescroll menu.

ScaleChange the map scale over the area selected.

Set as destinationAdd the location as a destination in an itinerary.

POI aroundSearch for nearby points of interest.

Read traffic msg.Search for current traffic messages in the area.

Surveillance1

Select between Set for surveill. 1, 2 or 3 andpress ENTER to store a map view you want tosave as a surveillance area, e.g. heavily traf-

ficked roads that are often subject to trafficproblems.

Activating the mapSelect map options in the Shortcut menu andselect the areas requiring surveillance.

Store locationSave the location for later use in Setdestination Stored locations.

Following a route on the mapTo make it easy to follow a set itinerary, thesystem has a built-in "magnet" function. Thismeans that regardless of the number of turnsor changes of direction in the route, the crosshairs will follow the route by simply holdingdown a button.

One of the lines in the cross hairs will be dis-played darker than the other one to indicatewhich button should be pressed.

Use button or to follow the route automat-ically.

Use button or to follow the route automat-ically.

To deactivate the "magnet" function, move thecross hairs slightly away from the route until theline in the cross hairs is no longer dark. Scroll-ing will then function normally.

1 Not available in all areas.


Menu selections

03

46

Three levels of the menu structure are shownhere. A number of the third level menus alsohave sub-menus, which are described in detailin their respective sections in this manual.

Set destination p. 48

Address

State

City

Number

Street

Interse.

p. 48


POI by name

Around the car

Along the route

Around point on map

Along a street

p. 49

Stored locations

Add to itinerary/Infor-mation/Edit/Sorting/Delete location

p. 50

Last 20

Add to itinerary/Infor-mation/Delete location

p. 50

Return trip

see Itinerary

p. 50

Point on map p. 50

Latitude/longitude p. 51

Itinerary p. 53

Start guidance p. 53

Add to itinerary

see Set destination Address

p. 53

Route options

Route

Avoid highways/tollroads/ferries/car train/time-restr. roads/speci-fied areas

Reset to default

p. 58

Clear itinerary p. 53

Next destination p. 48

Address

see Set destination Address

p. 48

Current position p. 56

Settings p. 58


Menu selections

03

47

Traffic informationA

Dynamic route guid-ance

Traffic-info. selection

Search stations

Current station

Traffic service

Reset to default

p. 69

Route options

Route

Avoid highways/tollroads/ferries/car train/time-restr. roads/speci-fied areas/traffic prob-lems

Reset to default

p. 58

Map options

POI selection

Map

Map view

2D map orientation

Right map view

Left map view

Compass

Current location

Reset to default

p. 59

Guiding options

Time/dist. to go

POI warning

Charge area warning

Reset to default

p. 59

System options

Guiding voice

Guiding volume

Language

Menu color

Map color

Screen saver

Help

Distance unit

User mode

Date & time info

GPS Information

About

Reset to default

p. 60

Start demo p. 62

Shut down p. 9

A Option. Not available in all markets.



03

48

Selecting an address

G03

3461

Selecting a street address

Set destination Address

The system will place the cursor on Street. Themost recently selected State and City will bepre-selected.

1. To change the state or city, use thenavigation control to move to State and/or City,

2. Press ENTER, or choose among the mostrecently chosen alternatives with .

NOTE

The definition of a city or area may vary. Itwill sometimes be an entire city, or a partic-ular section of a city.

The system does not contain streetaddresses for very small towns or villages.In these cases, the center of the town isused as the destination.

Alternative 1 Select Street without choosing a city.The system will provide guidance to the mid-point of the selected street. If the street existsin more than one city, a list of alternatives willbe displayed.

Alternative 21. Begin by selecting a City.

2. Select a Street.

Selecting a street numberIf the address selected has a street number,this can be used as a specific destination.

1. After selecting a street, go to theNumber row and press ENTER

or

Go directly to Set. Alternative street num-bers will be displayed.

2. Go to Set after you have entered a streetnumber.> If a street number has not been entered,

the system will guide you to the mid-point of the selected street.

SetConfirms the entered number.

AdjustReturns to the previous screen.

Selecting an intersection Go to Interse. and choose a street that

intersects the selected street.

Start guidance Go to Set to add the entered address to

the itinerary.

Go to Start guidance to begin receivingdirections to the destination.

InformationProvides information about the destination.



03

49

Search using a Zip code


Instead of searching in a city, you can opt tosearch for an areas Zip code.

1. Go to ZIP code and press ENTER.

2. Select the digits in the Zip code and pressENTER

or

Select a Zip code from the list.

3. Go to Street to select a street with the Zipcode entered and press ENTER.

4. Go to Start guidance to begin receivingdirections to the destination.

NOTE

This also applies to searches using Pointsof interest.

Point of Interest (POI)

Set destination POI

Points of interest (POI) include gas stations,hotels, restaurants, Volvo retailers, hospitals,parking lots, etc.

Press ENTER to access a sub-menu withdifferent search options in order to select apoint of interest.

POI by name

Enter the name of the point of interest, or selectan alternative in the menu. The list only showsthe points of interest in the selected city/area.

Around the carThe system will search for POIs around the car(max. 60 mile radius) The search will stop after40 POIs have been found.

Along the routeIf a destination has been selected, the systemcan search for points of interest along the route(within approx. 0.5 miles from the route).

Around point on mapThe system will perform the same type ofsearch as for Around the car, but the searchwill be based on a point on the map.

Along streetThe system will search along a specified street.



03

50

NOTE

You can also search for Points of interestaround the car, along the route, or along thehighway in the Shortcut menu, seepage 32.

Types of points of interest/Differentcategories

Set destination POI POI by name

The system will first place the cursor on Type.The most recently selected State and Cityshould be displayed.

If this is not the case:

1. Go to State and/or City and press ENTER

or

Choose among the most recently selectedones using .

2. Go to Name and press ENTER to select aPOI without specifying a city.

3. Go to Set and press ENTER.

4. Then go to Start guidance and pressENTER to receive directions to the desti-nation.

NOTE

For a more detailed search, first select Cityand then go to Name.

There are sub-categories for restaurants,etc., to simplify the search.

Information about the point of interestInformation shows the address, geographiccoordinates, and in certain cases, also the tel-ephone number of the point of interest.

MapShows the POIs location on the map.

2nd POIPoints of interest such as airports often haverestaurants, gas stations, etc., on site.

Instead of searching for a restaurant in themain menu, you can choose a restaurantdirectly under the selected airport. Avoidingalternatives outside of the airport makes thesearch quicker and easier.

Stored locations

Previously stored locations

Set destination Stored locations

A stored location is a previously stored desti-nation, such as a home address, favorite res-taurant, an airport, or a Volvo retailer. Informa-tion about storing locations can be found onsee page 54.

Navigate among the stored locations andpress or ENTER to access the sub-menu.

Add to itineraryPlace the stored location in the itinerary.

InformationProvides information about the stored location.

EditChange the name, add a sound, etc., for thestored area. See also the heading "Add infor-mation about a stored location."

SortingSort the list of stored locations by icon or name.

Delete locationDeletes the stored location.

Select a position for a new storedlocation1. Select Edit,



03

51

2. Use , to go to Adjust.

3. Press ENTER to specify a position on themap for a new stored location.

4. Move the cursor with the navigationcontrol to a new position and pressENTER.

5. Then select Store and press ENTER tostore the new location.

Add information about a stored location Select Edit and use to go to Add

info.. Press ENTER to add additional infor-mation about the stored location.

The following can be added to each storedlocation:

Alert On/Off (to remind the driver thathe/she is approaching the stored loca-tion)

Icon Name Address City State Phone E-mail URL

Last 20

Set destination Last 20

This is a list of the twenty most recentlyselected destinations. The scroll bar at the rightof the screen indicates that there are morealternatives than can be displayed at one time.

Go to the desired destination and press or ENTER to access the sub-menu.

Add to itineraryAdds the destination to the itinerary.

InformationProvides a summary about the destination.

Delete locationRemove the destination from the Last 20 list.

Return trip

Set destination Return trip

Select Start guidance and press ENTER.The system will begin guiding you back to thelocation where Start guidance was mostrecently selected.

Point on the map

Searching via a point on the map

Set destination Point on map

1. Use the navigation control to move thecursor to the desired destination.

2. Press ENTER to access the map scrollmenu.

3. Select Set destination, see page 45.

NOTE

A position on the map can be selecteddirectly with the cursor by using thenavigation control in map mode.

Latitude/longitude

Search by coordinates

Set destination Latitude/longitude

1. Select a destination by specifying coordi-nates on the map.

2. Select a latitude with the navigationcontrol: N for north or S for south.

3. Go to the second row to specify a longi-tude: select E for east or W for west.



03

52

> OK

Shows the position with the specifiedcoordinates on the map.

4. Press ENTER to access the map scrollmenu.

5. Go to Set as destination and pressENTER to select the position as a destina-tion.

6. Press BACK to resume entering coordi-nates.> Cancel

Return to the previous screen.


Itinerary

03

53

Making an itinerary

Destination/Intermediate destination

Itinerary

The menu selection Itinerary becomes acces-sible after a destination has been selected.

Make an itinerary with several stops to avoidselecting a number of destinations during atrip.

Up to six intermediate destinations and onefinal destination can be specified in an itinerary.

Start guidance

Begin guidance to the destination.

Add to itineraryAll additional destinations are added to the itin-erary.

Route optionsProvides settings for selecting various types ofroads, etc.

Clear itineraryDeletes the entire itinerary.

Editing an itinerary

Itinerary

Select a specified destination and pressENTER or to access a sub-menu.

InformationProvides information about the destination.

DeleteRemoves the destination from the itinerary.

MoveChange the destinations position in the itiner-ary.

AdjustSelect a new location on the map as a desti-nation.

StoreSave the destination, which will be accessibleunder Itinerary.


Itinerary

03

54

Removing destinations from anitinerary

Itinerary

Delete all destinations: All intermediate desti-nations and the final destination will be deleted.

Go directly to Clear itinerary and pressENTER.

Delete intermediate destinations in an itinerary:

1. Select one of the specified intermediatedestinations and press ENTER or toaccess a sub-menu.

2. Go to Delete and press ENTER.

NOTE

Destinations that have been passed areautomatically deleted from the itinerary.

Saving destinations for a return tripUp to 250 destinations can be stored for re-usein different itineraries.

An audible signal that alerts the driver that he/she is approaching a stored destination as wellas additional information can be linked to astored destination, see page 51 "Add infor-mation about a stored location."

Itinerary

Saving a destination from the itinerary1. Go to the destination to be saved with the

navigation control and press ENTER or to access a sub-menu.

2. Select Store and press ENTER.

3. Use the navigation control to select thesymbol to be displayed on the map andpress ENTER.

4. Then use to enter a name for the loca-tion.

5. Go to Store and press ENTER.

The current position can also be stored quickly,for example while driving, by simply pressingone button, see page 42.

Save a position on the map

Map mode

1. In Map mode, use the navigation controlto move the cursor to the point on the mapto be saved and press ENTER.

2. Select Store in the Map scroll menu andpress ENTER.

3. Use the navigation control to select thesymbol to be displayed on the map andpress ENTER.

4. Then use to enter a name for the loca-tion and press ENTER.


Next destination

03

55

Next destination in the itinerary

Next destination

The map will show the next destination.

1. Press ENTER or for information such asthe name of the destination, or remainingtravel time or distance from the currentlocation to the destination.

2. Press ENTER again if other destinationshave been specified for information and tosee these destinations on the map.

3. Go to Map and press ENTER to see mapinformation over the area.


Current position

03

56

Current position

Current position

The map shows the vehicles current position.

Press ENTER or for information aboutthis position, such as its name or coordi-nates.

GPSShows the number of satellites with which thesystem is in contact.


Traffic information (option)

03

57

Traffic information

Settings Traffic information


NOTE

Please be aware that traffic information maynot be available in all areas.


Settings

03

58

Route options


Use the navigation control to moveamong the options, select the desired set-tings and press ENTER to save the set-tings.

Press BACK to undo a setting.

RouteSelect Fast, short, or easy for the system tocalculate a route.

Fast: The system will prioritize major roadsfor the fastest permitted driving.

Short: The system will prioritize as far aspossible the shortest distance to the destina-tion.

Easy: The system will prioritize as far as pos-sible roads that do not entail difficult drivingsituations or numerous intersections.

Avoid highwaysSet the system to avoid highways/freewayswhen calculating a route.

Avoid toll roadsSet the system to avoid toll roads when calcu-lating a route.

Avoid ferriesSet the system to avoid ferries when calculat-ing a route.

Avoid car trainSet the system to exclude car trains when cal-culating a route.

Avoid traffic problemsSet the system to take traffic disruptions intoconsideration when calculating a route.

Avoid time-restr. roadsSet the system to avoid time-restricted roadswhen calculating a route.

NOTE

This function requires that the vehiclesclock be correctly set for the current timezone.

Avoid specified areasThis function is designed to help you avoidbeing guided to areas, cities or sections of cit-ies that you prefer not to drive through. Thesystem always excludes these areas when cal-culating a route.

1. Set the system to avoid specified areaswhen calculating a route and press .

2. Select Avoid specified areas and press again to specify an area.


Settings

03

59

Reset to defaultReturn to the systems factory settings forroute options.

Press , select OK and press ENTER.

NOTE

When the system calculates a route overlonger distances, it is designed to selectmajor roads (highways/freeways, etc.).

If you have set the system to avoid highwaysand toll roads, the system will avoid guidingyou to these types of roads to as great anextent as possible, and will only use suchroads when no other reasonable alternativeis available.

Map optionsSelect the way in which the map is displayed.

Settings Map options

Move among the functions with thenavigation control and press ENTER tosave.

POI selection Press to access a sub-menu. Select Show to display all POI symbols onthe map.

Select Hide to show no POI symbols.

Select Show selected and press to selectthe symbols to be displayed on the map. Thesymbols selected to be displayed will bemarked with an X.

Select or unselect symbols with or and press ENTER to save.

MapSelect Show or Hide. If the map is hidden, thesystem will use an arrow for guidance.

Right map viewChoose to display the map in 2D (two dimen-sional - straight from above) or 3D (three-dimensional - angled from above).

When 3D is selected, the vehicle's direc-tion is always toward the top of the screen.

When 2D is selected, choose whether 2DHeading or 2D North is to be at the top ofthe screen.

Selecting elevation angle.

Settings Map Map view 3D

After selecting 3D with or and ENTER,the panel for selecting the elevation angle willbe displayed. Select the desired angle with

or followed by ENTER and BACK.


Settings

03

60

Left map viewSee the information in "Right map view."

NOTE

If 3D has been chosen for the right map, theleft map can only be viewed in 2D.

CompassSelect the way in which the compass is dis-played on the screen: Icon, Text or Hide.

Current locationSelect whether or not the name of the street onwhich you are currently driving will be dis-played at the bottom of the screen.

Reset to defaultReturn to the factory setting for all mapoptions.


Guiding options

Settings Guiding options

Time/dist. to goSelect RTA, ETA or Hide.

RTA: (Remaining Time to Arrival) The timeremaining from the current location to the des-tination.

ETA: (Estimated Time of Arrival).

NOTE

The time set on the vehicles clock affectsthe times calculated by the system.

Charge area warningIn addition to toll roads with gates or othertypes of barriers, there are also other restrictedroads/areas with no physical barriers for whichfees are charged.

Select Yes/On for a warning when approach-ing such areas or No/Off if no warning isdesired.

POI warningThe driver is alerted by an audible signal whenhe/she is approaching a section of road whereaccidents are common or a speed camera.

Select Yes to activate the audible signalfeature or No if no signal is desired.

Marking sections of road where accidents arecommon and/or have speed cameras is deter-mined by state/provincial/local legislation.

NOTE

In certain areas, no speed limit is listedon the map when a warning is providedfor a camera.

Please keep in mind that the speed limitin certain areas may have changed andmay not correspond to the speed limitshown on the map when a camerawarning is provided.

The driver is always responsible foradhering to current, applicable trafficregulations.

Reset to defaultReturn to the factory setting for all guidingoptions.


System options

Settings System options

Move among the functions with thenavigation control and press ENTER tosave settings.

Press BACK to undo a setting.

Guiding voiceSelect a Male or Female voice.


Settings

03

61

Guiding volumeSet the volume level 1-5 for the guiding voiceor choose Off.

LanguageSelect the language to be used by the system.

Menu colorSelect Black, Chrome or Blue.

Map colorSelect Bright 1, Bright 2 or Dark .

Light colors are intended for daylight use anddark colors are best suited for dark lightingconditions.

Screen saverIf the screen saver is set to ON, the screen willgo blank after 30 seconds).

HelpHide or Show context sensitive help texts atthe bottom of the screen.

Distance unitChoose between miles or kilometers.

User modeToggle between Easy and Advanced modes.

Date & time infoSet date and time information.

GPS Information

Shows coordinates and the altitude of the vehi-cles current location, and displays the numberof satellites with which the system has contact.

Press

NOTE

Information about altitude is shown in stepsof 30 ft. All altitudes below 150 ft are shownas


System simulation

03

62

Start the demo (system simulation)

Settings Start demo

When the vehicle is at a standstill, this functionoffers simulated guidance to the currently setdestination. Settings can also be made duringthe demonstration.

Use Stop demo in Settings to stop thesimulation.

NOTE

The demonstration function can only beused if a destination has been selected.


03

63

G029197

64

Introduction............................................................................................. 66Avoiding traffic problems ....................................................................... 67Selecting information.............................................................................. 69Reading information................................................................................ 70

TRAFFIC INFORMATION

04 Traffic information

Introduction

04

66

Reception and displayBroadcast traffic information is alwaysreceived, regardless of whether the navigationsystem is in Easy or Advanced mode.

Settings for the way in which traffic informationis presented can only be made in Advancedmode, see page 42.

The way in which traffic information is presen-ted is also affected by the way in which it isbroadcast.

NOTE

Traffic information is currently not availablein all areas.

The area covered by the system is beingsteadily expanded.

Traffic symbols on the map

Symbol for traffic message.

When at least one traffic message has beenreceived for the programmed route, this will beindicated by a symbol in the upper left corneron the map. Use the navigation control to scrollto the message in order to see the location andtype of problem indicated.

Disruptions in traffic are marked by symbols,lines, and boxes. These symbols are displayedin red or yellow.

Red important information.

Yellow General information.

Accident

Slow-moving traffic

Slow-moving traffic in both direc-tions

Traffic at a standstill

Local traffic message

Other information

Extent

Certain traffic messages also contain informa-tion about the extent of the traffic disruption.

For all map scales up to five miles (5 km) theextent of the disruption is marked with a red oryellow line along the affected road. The lengthof the line indicates the extent (length) of thedisruption.


Avoiding traffic problems

04

67

Before guidance begins


When setting a new route, select whether ornot the system should take traffic problemsinto account when the function Startguidance is activated, see page 53.

1. Select Avoid traffic problems.

2. Choose between Yes and No.

YesThe system will avoid roads where there aretraffic tie-ups to as great an extent as possiblewhen a route is activated.

NoThe system will not avoid roads where there aretraffic disruptions.

NOTE

When the system has been started, it cantake up to 15 minutes before all traffic infor-mation for the area has been downloaded.

During your trip

Settings Traffic informationDynamic route guidance

The system will suggest a different route ifthere are better alternatives, for instance, iftraffic information indicates a tie-up along theoriginally selected route.

Man/Sem-aut/Auto/OffSelect the way for the system to suggest analternative route.

ManualAn alternate route will be suggested, regard-less of whether it is better or worse; select/accept the suggested route and a new routewill be calculated.

Sem-autoAn alternative route will only be suggested if itis better; select/accept the suggested routeand a new route will be calculated.

AutoThe system will calculate and use a new routeautomatically on the condition that it is better.

OffThe system will not show or calculate an alter-native route.

OffThe system will not search for a better route inthe event of a traffic problem.

Messages along the routeIf Man/sem-aut/ has been selected and a traf-fic disruption has occurred along the route, thefollowing will be displayed.

If there is another route that will enable you toavoid the disruption, the difference in distanceand driving time will be displayed on thescreen:

Changed traffic situation. Use new route?:200ft longer, 00h 09m faster.

Select Yes or No.YesA new route will be used around the affectedarea.


Avoiding traffic problems

04

68

NoThe system will continue to guide you throughthe area affected by the traffic disruption.

Show new routeThis displays a map showing the new route.


Selecting information

04

69

Traffic information selections

G021177

Settings Traffic information Traffic-info. selection

Select the type of traffic information to be dis-played and taken into consideration when thesystem calculates a route.

Show allAll traffic information will be displayed.

Hide allNo traffic information will be displayed.

Show selected1. Press to select among the symbols.

2. Use or to select which traffic infor-mation symbols (traffic messages) that willbe displayed on the map.

3. Activate/deactivate with or .

4. Confirm the settings with ENTER.

The scroll bar on the right side of the screenindicates that there are more options in the listthan can be displayed at one time.

Traffic signs on the map

Accident

Contraflow (two-way traffic, singlelanes in each direction)

Diversion (Detour)

Information

Narrow road

Parking information

Congestion

Roadwork

Slippery road

Other hazard


Reading information

04

70

Reading traffic messages

Read traffic msg.

G025966

Detailed traffic information

To read traffic messages on the screen:

1. Press ENTER in map mode for the ShortcutMenu:

G029190

2. Select the sub-menu Read traffic msg

G028755G028755 with or and press ENTER,

see page 43.> A red or yellow frame indicates the cur-

rent mesage.

3. Scroll forward or back with or andpress ENTER for detailed traffic informa-tion (see the example in the illustration).

4. Press BACK to return to the current mes-sages again.> The number of messages available for

the map area is displayed on the screen.

Detailed information about the traffic disrup-tion is also displayed. The extent of the disrup-tion is shown at the top of the screen. If thetraffic disruption is on the currently selectedroute, the distance to the disruption will be dis-played.

The information provided will vary, for exam-ple, duration, limitations in speed, vehiclewidth and height, roads effected, etc., depend-ing on the content of the message.

ScaleThe current map scale determines the amountof traffic information that can be displayed; thelarger the area shown on the map, the greaterthe amount of information that can be dis-played.

Station search/selecting a station fortraffic information

Settings Traffic information Search/select station

The system searches automatically for trafficinformation, but it is also possible to select aspecific station.

Search station Press ENTER to search for existing sta-

tions.

Select station1. Press ENTER to select among the existing

stations.

2. Select a station by using or andpress ENTER.

3. Press BACK to return to the previousscreen.

Current stationShows the station that is currently selected fortraffic information.

Reset to defaultReturn to the default factory settings for sta-tions.



04

71

G028760

72

Road numbers and Points of interest..................................................... 74

SYMBOLS ON THE MAP

05 Symbols on the map

Road numbers and Points of interest

05

74

Road numbersLocal and interstate road numbers are shownon the map.

1

Points Of Interest (POI)Choose to show all or none of the points ofinterest or select the ones to be displayed.

Settings Map options POI selectionShow selected

1. With POI selection marked, press amenu will open.

2. Mark Show selected and press anew menu will open.

3. Points of interest marked by an X will bedisplayed on the map move forward inthe list and remove the Xs with for thesymbols that are not to be displayed.

4. Finish by pressing ENTER when all of thechoices have been made and navigateback out of the menu by pressing BACK.

NOTE

The symbol for a certain point of interestmay vary from one state or province toanother.

Select the points of interest to be shown on themap.

Airport

Amusement park

ATM

Automobile club

Bank

Bus station

Beach

Bowling

Car rental

Casino

City center

City hall

Civic center

Community center

Court house

Coffe shop

Company



05

75

Commuter rail station

Compressed natural gas

Concert hall

Convention/exhibition center

Doctor

Dry cleaner

Embassy

Ferry terminal

Fire brigade

Gas station

Golf course

Government office

Grocery store

Hamlet

Historical monument

Hospital

Hotel

Ice skating

Library

Liquid petroleum gas

Lookout

Major companies

Marina

Movie theater

Museum

Night life/Music club

Park & ride

Parking garage

Parking

Pharmacy

Place of worship

Police station

Post office

Public sport airport

Recreation area/Park

Rest area

Restaurant

School

Shopping center



05

76

Ski resort

Sports complex

Stadium

Swimming pool

Theater/opera

Toll boothA

Tourist attraction

Tourist information

Train station

University/college

Volvo retailer

Winery

Zoo

A Cannot be selected as a destination


05

77

G028731

78

Frequently asked questions.................................................................... 80EULA End User License Agreement.................................................... 82

QUESTIONS & ANSWERS

06 Questions & answers

Frequently asked questions

06

80

The vehicles position on the map isincorrectThe Global Positioning System (GPS) indicatesthe cars position with an accuracy of about65 feet (20 meter). Accuracy may be even lesswhen driving on roads lying parallel to anotherroad, winding roads, roads on several levelsand also after driving a long distance withoutmaking any distinct turns. Tall buildings andmountains, tunnels, viaducts, over/under-passes etc also have a negative affect on thereception of GPS signals, which means that theestimation of the cars position may not be pre-cise.

VNS does not always calculate thefastest/shortest route.When calculating a route, distance, width ofroad, type of road, number of right or left turns,traffic circles etc., are all taken into accountwhen calculating the best theoretical route.Experience and local knowledge may, how-ever, lead to a better choice of route.

The VNS system chooses toll roads,freeways, and ferries even though I haveopted to avoid them.When calculating routes over longer distances,for technical reasons the system can only usemajor roads. If you select NO for toll roads,freeways, and ferries, they will be avoided as

much as possible, but will be used if no otherreasonable alternative is available.

After being transported, the carsposition on the map is incorrect.If the car is transported, for example by ferry ortrain, or in such a way as to impede the recep-tion of GPS signals, it can take up to 5 minutesto calculate the cars new position correctly.

The cars position on the map is incorrectafter the car battery has beendisconnected.If power has been cut from the GPS antenna,it can take more than 5 minutes for the GPSsignals to be received correctly and the carsposition to be calculated.

It may be necessary to drive ten to fifteen miles,and make a number of turns before for the sys-tem will function optimally.

The car symbol on the map moveserratically after a tire changeIn addition to the GPS receiver, the vehiclesspeedometer and an onboard gyro are alsoused to calculate the vehicles current locationand direction of travel. If the spare tire is put onthe vehicle, or is a change is made from sum-mer to winter tires (or vice versa), the naviga-tion system must "learn" the new dimensionsof the tire(s). Therefore, it may be necessary to

drive for several miles, including a number ofturns, for the system to make this adjustment.

The map image does not correspondwith actual conditions.Factors such as the constant expansion andrebuilding of the road network, new traffic reg-ulations constantly being introduced etc.,mean that the digital map database is notalways complete. Maps information is periodi-cally developed and updated. Additional infor-mation is available from your Volvo retailer.

The map scale sometimes changesThere is no detailed map information for certainareas. If this is the case, the system automati-cally changes the map scale.

Certain menu options are not availableCheck the settings that you have made. SelectReset to default for the particular option toreturn to the default settings.

The system indicates the route on whichI am already driving when I have selectedStart guidance or DetourThe system cannot find a better alternative tothe current route.

The car symbol on screen jumps forwardor spins.The system may need a few seconds to sensethe position and movement of the car before


Frequently asked questions

06

81

you drive off. Switch off the VNS system andthe ignition. Switch on the ignition again andrestart VNS, but remain at a standstill for ashort time before driving off.

I am planning a long trip but do not wantto specify destinations in the cities that Iwill be passing through. What is theeasiest way to set up an itinerary?Select the final destination directly on the mapusing the pointer. The system will automaticallyguide you to the final destination even if youdrive past intermediate destinations.

Why do I not receive all trafficmessages?The function is not available, not fully devel-oped, or is not available on all markets. Also,check that the correct settings have beenmade in Route options.

The systems map information is not up-to-dateContact your Volvo retailer for updated mapinformation.

WARNING

Navigating safely

Always use good judgment when followingnavigation system guidance, and do not fol-low guidance that seems contrary to yourown best judgment.


EULA End User License Agreement

06

82

END-USER TERMSThe Map Data Disc ("Data") is provided for yourpersonal, internal use only and not for resale. Itis protected by copyright, and is subject to thefollowing terms and conditions which areagreed to by you, on the one hand, and NAV-TEQ North America, LLC ("NT") and its licen-sors (including their licensors and suppliers) onthe other hand.

2006-2010 NAVTEQ. All rights reserved.The Data for areas of Canada includes infor-mation taken with permission from Canadianauthorities, including: Her Majesty theQueen in Right of Canada, Queens Printerfor Ontario, Canada Post Corporation, Geo-Base.

NAVTEQ holds a non-exclusive license fromthe United States Postal Service to publishand sell ZIP+4 information.

United States Postal Service 2005. Pricesare not established, controlled or approved bythe United States Postal Service. The follow-ing trademarks and registrations are owned bythe USPS: United States Postal Service, USPS,and ZIP+4.

TERMS AND CONDITIONS

Personal Use OnlyYou agree to use this Data for the solely per-sonal, non-commercial purposes for which youwere licensed, and not for service bureau,time-sharing or other similar purposes.Accordingly, but subject to the restrictions setforth in the following paragraphs, you maycopy this Data only as necessary for your per-sonal use to (i) view it, and (ii) save it, providedthat you do not remove any copyright noticesthat appear and do not modify the Data in anyway.

You agree not to otherwise reproduce, copy,modify, decompile, disassemble or reverseengineer any portion of this Data, and may nottransfer or distribute it in any form, for any pur-pose, except to the extent permitted by man-datory laws.

You may transfer the Data and all accompany-ing materials on a permanent basis if you retainno copies and the recipient agrees to theseEnd-User Terms. Data provided in multi-discsets may not be transferred or sold on a dividedor single disc basis.

RestrictionsExcept where you have been specificallylicensed to do so by NT and without limiting thepreceding paragraph, you may not (a) use thisData with any products, systems, or applica-

tions installed or otherwise connected to or incommunication with vehicles, capable of vehi-cle navigation, positioning, dispatch, real timeroute guidance, fleet management or similarapplications; or (b) with or in communicationwith any positioning devices or any mobile orwireless-connected electronic or computerdevices, including without limitation cellularphones, palmtop and handheld computers,pagers, and personal digital assistants orPDAs.

WarningThe Data may contain inaccurate or incompleteinformation due to the passage of time, chang-ing circumstances, sources used and thenature of collecting comprehensive geo-graphic data, any of which may lead to incor-rect results.

No WarrantyThis Data is provided to you "as is," and youagree to use it at your own risk. NT and itslicensors (and their licensors and suppliers)make no guarantees, representations or war-ranties of any kind, express or implied, arisingby law or otherwise, including but not limitedto, content, quality, accuracy, completeness,effectiveness, reliability, fitness for a particularpurpose, usefulness, use or results to beobtained from this Data, or that the Data orserver will be uninterrupted or error-free.


EULA End User License Agreement

06

83

Disclaimer of WarrantyNT AND ITS LICENSORS (INCLUD-ING THEIR LICENSORS AND SUP-PLIERS) DISCLAIM ANY WARRAN-TIES, EXPRESS OR IMPLIED, OFQUALITY, PERFORMANCE, MER-CHANTABILITY, FITNESS FOR APARTICULAR PURPOSE OR NON-INFRINGEMENT.Some States, Territories and Countries do notallow certain warranty exclusions, so to thatextent the above exclusion may not apply toyou.

Disclaimer of LiabilityNT AND ITS LICENSORS (INCLUD-ING THEIR LICENSORS AND SUP-PLIERS) SHALL NOT BE LIABLE TOYOU IN RESPECT OF ANY CLAIM,DEMAND OR ACTION, IRRESPEC-TIVE OF THE NATURE OF THECAUSE OF THE CLAIM, DEMANDOR ACTION ALLEGING ANY LOSS,INJURY OR DAMAGES, DIRECT ORINDIRECT, WHICH MAY RESULTFROM THE USE OR POSSESSIONOF THE INFORMATION; OR FOR

ANY LOSS OF PROFIT, REVENUE,CONTRACTS OR SAVINGS, OR ANYOTHER DIRECT, INDIRECT, INCI-DENTAL, SPECIAL OR CONSE-QUENTIAL DAMAGES ARISING OUTOF YOUR USE OF OR INABILITY TOUSE THIS INFORMATION, ANYDEFECT IN THE INFORMATION, ORTHE BREACH OF THESE TERMS ORCONDITIONS, WHETHER IN ANACTION IN CONTRACT OR TORTOR BASED ON A WARRANTY, EVENIF NT OR ITS LICENSORS HAVEBEEN ADVISED OF THE POSSIBIL-ITY OF SUCH DAMAGES.Some States, Territories and Countries do notallow certain liability exclusions or damageslimitations, so to that extent the above may notapply to you.

Export ControlYou agree not to export from anywhere anypart of the Data provided to you or any directproduct thereof except in compliance with, andwith all licenses and approvals required under,applicable export laws, rules and regulations.

Entire AgreementThese terms and conditions constitute theentire agreement between NT (and its licen-sors, including their licensors and suppliers)and you pertaining to the subject matterhereof, and supersedes in their entirety anyand all written or oral agreements previouslyexisting between us with respect to such sub-ject matter.

Governing LawThe above terms and conditions shall be gov-erned by the laws of the State of Illinois, withoutgiving effect to (i) its conflict of laws provisions,or (ii) the United Nations Convention for Con-tracts for the International Sale of Goods,which is explicitly excluded.

You agree to submit to the jurisdiction of theState of Illinois for any and all disputes, claimsand actions arising from or in connection withthe Data provided to you hereunder.

Government End UsersIf the Data is being acquired by or on behalf ofthe United States government or any otherentity seeking or applying rights similar tothose custom

volvo c30 c70 & xc90 volvo navigation system...

Documents