volume iii - engineering projectsengineeringprojects.com/tender/uploadfiles/3198_vol... ·...
TRANSCRIPT
AN ISO 9001 & 14001 COMPANY
TENDER DOCUMENT
TENDER No: DLI/CON/749A/562
TENDER FOR CONSTRUCTION OF KALINGA MODEL RESIDENTIAL SCHOOL AT KUCHINDA, DIST. SAMBALPUR, ODISHA.
VOLUME – III
BOQ / PRICE BID
SI. No. DESCRIPTION ESTIMATED COST (Rs.)
1 2 3 4 5
In figures In words In figures In words
1 CIVIL WORKS 84433983
2 ELECTRICAL WORKS & AREA LIGHTING WORK 6962822
3 PH WORKS 2678799
4 FIRE FIGHTING WORKS 1887392
5 BORE WELL 260665
6 BOUNDARY WALL 2079466
7 CC ROAD & DRAIN 1365781
99,668,908
(In Figures)_____________________________________________________________________________________________________________________
(In Words)______________________________________________________________________________________________________________________
ENGINEERING PROJECTS (INDIA) LTD.
(A GOVERNMENT OF INDIA ENTERPRISE)
QUOTING SHEET FOR BIDDERS
Name of work: Construction of Kalinga Model Residential School at Kuchinda, Dist. Sambalpur, Odisha.
NIT No. DLI/CON/749A/562 dated 03.01.2017
TO BE QUOTED BY TENDERER
% (-) BELOW/ AT PAR/ (+) ABOVEAMOUNT IN Rs. AFTER ADDING %
(-) BELOW / (+) ABOVE/ AT PAR
6=(3X4)
Total Tender Cost
BIDDERS FINANCIAL OFFER:
Seal & Signature of Bidder
SI. No. DESCRIPTIONESTIMATED COST
(Rs.)
Add Service Tax +
SWC + KKS @ 6.0%
(Rs.)
Total Estimated Cost (Rs.)
1 CIVIL WORKS 79,654,701 4,779,282 84,433,983
2ELECTRICAL WORKS & AREA
LIGHTING WORK6,568,700 394,122 6,962,822
3 PH WORKS 2,527,169 151,630 2,678,799
4 FIRE FIGHTING WORKS 1,780,558 106,834 1,887,392
5 BORE WELL 245,910 14,755 260,665
6 BOUNDARY WALL 1,961,760 117,706 2,079,466
7 CC ROAD & DRAIN 1,288,473 77,308 1,365,781
94,027,271 5,641,637 99,668,908
Name of work: Construction of Kalinga Model Residential School at Kuchinda, Dist. Sambalpur, Odisha
NIT No. DLI/CON/749A/562
ABSTRACT SHEET
Grand Total
EPI 2 SIGN AND STAMP OF BIDDER
SlNo Description of Work Total Qty Unit Rate Amount
1 2 3 4 5 6
1a Excavation in ordinary soil for foundation including dressing
and levelling the bed and depositing the soil within 50m.
initial lead and 1.5m.initial lift including rough dressing and
breaking clods to maximum 5cm. to 7cm. and laying in layer
3999.21 Cum 89.20 356729.11
b Earth work in hard soil within 50m initial lead & 1.5m initial
lift including dressing, levelling & breaking clods to
maximum 5cm to 7cm & laying in layers not exceeding 0.3m
in depth & as per specification & direction of Department.
c Earth work in stoney earth & gravels mixed with stone
boulders not exceeding 0.014 cum in volume within 50m
initial lead & 1.50m lift including dressing, levelling &
breaking clods to maximum 5cm to 7cm & laying in layers
not exceeding 0.3m in depth & as per specification &
direction of Department.
d Excavation of foundation in laterite rock or any hard rock
(other than granite or disintegrated rock) removed by
chiselling including dressing & levelling & benching the bed
not exceeding 1.50m depth & depositing the soil within initial
lead of 50m & as per specification approved by the
department.
2 Supplying and filling in foundation trenches and plinth,
ditches with sand well watered and rammed in layers not
exceeding 23 cm. In depth with all lead and lift including
cost, conveyance, loading, unloading, royalties and taxes of
all materials, cost of all labour, sundries, T&P required for
the work etc. complete in all respect as directed by the
Engineer-in-Charge. Measurement will be taken on finished
compacted section only).
2093.01 Cum 263.40 551298.28
4 Filling foundation trenches and Plinth with excavated &
selected earth, laying in layers not exceeding 23cm thick
well watered & rammed etc. complete including labour ,
T&P, lead & lift cost & conveyance, loading, unloading etc.
complete as per specification & direction of EIC.
i Filling in foundation of buildings 1333.07 Cum 59.47 79273.14
5 Providing and laying P.C.C. (1:3:6) in foundation trench and
below flooring using 40mm down graded chrusher broken
HG Metal, including compaction, curing including cost of all
materials and labour etc. complete as per direction of
Engineer- In -Charge.
726.98 Cum 4206.90 3058335.82
6 Fly ash brick masonry using Fly ash bricks of size 25cm x
12 cm x 8 cm having crushing strength not less than 75 kg.
Per Sqr. Cm. In cement mortar of mix(1:6) with cement and
screened and washed sharp sand for mortar after
immersing the bricks for 6 (six) hours in water before use in
foundation, plinth, basement and for ornamental flower
beds, plinth moulding and similar such type of works with all
necessary projections, splays cutting, circular moulding,
corbelling, chamfering, watering and curing etc. including
cost, conveyance, loading unloading, royalties and taxes of
all materials and cost of all labour, sundries, T & P required
for the works etc. complete in all respect as directed by the
Engineer-in-Charge.
250.38 Cum 3797.50 950820.68
CIVIL ESTIMATE
EPI 3 SIGN AND STAMP OF BIDDER
SlNo Description of Work Total Qty Unit Rate Amount
7 R.C.C. work of M20 using 20mm and down graded hard
granite crusher broken chipes including
laying,hosting,centring & shuttering with all cost,conveyance
of material etc.complete.
I FOUNDATION & PLINTH
Footing & Pedestal 508.18 Cum 5158.72 2621571.99
Column Upto plinth 51.56 Cum 5158.72 265996.58
Plinth beam 237.80 Cum 5873.10 1396602.15
II SUPERSTRUCTURE
Column in superstructure
GF 153.20 Cum 8689.10 1331191.84
FF 147.56 Cum 10157.30 1498806.11
Head Room 5.97 Cum 11233.50 67097.70
Roof beam
GF 180.55 Cum 8689.10 1568800.18
FF 170.56 Cum 10157.30 1732474.43
Head Room 9.73 Cum 11233.50 109292.48
Lintel
GF 26.99 Cum 8197.10 221236.84
FF 18.07 Cum 8883.90 160515.36
Head Room 0.29 Cum 9705.70 2795.24
Roof slab
GF 516.63 Cum 8555.70 4420165.77
FF 492.41 Cum 9314.30 4586433.53
Head Room 20.46 Cum 10222.50 209134.50
Chajja
GF 134.94 Sqm 679.70 91716.68
FF 124.44 Sqm 753.73 93795.87
Staircase
GF 23.14 Cum 8227.80 190383.43
FF 23.14 Cum 8920.30 206407.22
8 Supply M.S. reinforcement for R.C.C. work including cutting,
bending, binding and tying the grills and placing in position
including cost of reinforcement and binding wire 18 to 20
gauge.
GF 2250.00 Qntl. 5057.30 11378909.50
FF 1290.17 Qntl. 5071.60 6543221.81
Head Room 56.44 Qntl. 5080.50 286761.57
9 Fly ash brick masonry using Fly ash bricks of size 25 cm. x
12 cm. x 8 cm. having crushing strength not less than 75 kg.
Per Sqr. Cm. in cement mortar of mix (1:6) with cement after
immersing the bricks for 6 (Six) hours in water before use in
superstructure including splays cutting, circular moulding,
corbelling, chamfering and similar such type of works,
watering and curing etc. including cost, coveyance, loading
and unloading, royalties and taxes of all materials and cost
of all labour, scaffolding, sundries, T&P required for the
works etc. complete in all respect as directed by the
Engineer-in-charge.
GF 1523.88 Cum 3830.80 5837697.60
FF 1359.10 Cum 3993.70 5427843.56
Head Room & Parapet 277.12 Cum 4181.10 1158659.14
EPI 4 SIGN AND STAMP OF BIDDER
SlNo Description of Work Total Qty Unit Rate Amount
10 12 m.m thick cement plaster in cement mortar of mix (1:6) in
all floors at all height using screened & washed sharp river
sand for mortar with approved quality of cement, finished
smooth to the even surface of the brick masonry walls after
racking out the joints properly ,providing grooves wherever
necessary including cost, conveyance, loading,
unloading,stacking, royalties and taxes of all Materials, cost
of all Labour, T&P, Sundries , Scaffolding, Watering,
Curing,Rounding of corners etc. required for the work
complete etc. as directed by the Engineer- in -charge.
GF 7385.66 Sqm 132.40 977861.45
FF 6228.58 Sqm 135.40 843350.10
Head Room 1165.61 Sqm 138.50 161436.62
11 16 m.m thick cement plaster in cement mortar of mix (1:6) in
all floors at all height using screened & washed sharp river
sand for mortar with approved quality of cement, finished
smooth to the rough surface of the brick masonry walls
after racking out the joints properly ,providing grooves
wherever necessary including cost, conveyance, loading,
unloading,stacking, royalties and taxes of all Materials, cost
of all Labour, T&P, Sundries , Scaffolding, Watering,
Curing,Rounding of corners etc. required for the work
complete etc. as directed by the Engineer- in -charge.
GF 6551.86 Sqm 138.90 910053.90
FF 6259.94 Sqm 141.90 888285.99
Head Room & Parapet 1332.70 Sqm 144.90 193108.40
12 6 m.m thick cement plaster in cement mortar of mix (1:4) in
all floors at all height using screened & washed sharp river
sand for mortar with approved quality of cement to the
ceiling of the Roof Slab, Staircase, Beams,
Columns,Landings, Railings,Chajja ,Fins ,Walls ,Jally and
Shelves etc. including roughening, scraping, chiseling,
cleaning, closed deep chipping with slurry treatment and
finished smooth to all R.C.C. Surface including cost,
conveyance, loading, unloading, royalties ,stacking and
taxes of all Materials, cost of all Labour,Sundries, T&P,
Scaffolding,Watering, Curing etc. complete in all respect as
directed by the Engineer- in- charge
GF 4596.58 Sqm 109.50 503325.80
FF 3720.11 Sqm 111.80 415908.04
Head Room 143.92 Sqm 114.20 16436.03
13 2.5cm. thick grading concrete (1:2:2)on roof slab with 6mm.
Size on new work crusher broken hard Granite chips
including cost of all labour, materials with all taxes, lead, T &
P etc all complete.
4307.89 Sqm 235.97 1016546.99
14 Painting two coats of plastic emulsion paint with primer &
putty on interior wall surface and applying sand paper to
smooth the surface of reputed make including cost of all
material labour scafolding T&P etc all complete as directed
by engg. on Charge.
28259.37 Sqm 154.90 4377375.71
15 Providing two coats of weather coat over a coat of Priming
(with water based Exterior Primer)of approved quality and
colour, using the required quantity of paint as specified by
the manufecturer to give all external surface over the
finished plaster surface including watering the surface
before applying and curing for the required period as
directed by the Engineer-in-charge including cost of all
materials with taxes and transportation, all labour,
scaffolding, sundries, T&P etc. complete.
6862.61 Sqm 94.73 650101.15
EPI 5 SIGN AND STAMP OF BIDDER
SlNo Description of Work Total Qty Unit Rate Amount
16 Providing and fixing 200 x 200 x 6 mm glazed ceramic tiles
in all walls up to required height from the floor level of
approved make and shade in dado/ skirting fixed in neat
cement slurry after soaking the tiles in water over the base
of 12mm thick cement plaster(1:3) with white cement pointing in
joints including, washing and cleaning with oxalic acid etc.
complete including cost of all materials, transportation and taxes, all
labour, sundries, T&P, watering and curing etc. complete as
directed by Engineer -In-Charge.
GF 1439.69 Sqm 680.80 980138.77
FF 1324.22 Sqm 689.40 912917.54
17 Providing and laying CERAMIC TILES of any approved
make & shade in flooring on a bed of 25mm thick cement
mortar 1:1 (1 Cement :1 Coarse sand) finished with flush
pointing in white cement & pigment to match the shade of
the tiles.G floor
GF 418.28 Sqm 763.90 319522.88
FF 342.91 Sqm 769.60 263902.72
18 Fixing of interlocking blocks of 75mm thick of approved
pattern & shade over 75mm thick bed of sand.
GF 128.47 Sqm 989.20 127080.07
19 Providing, Fitting & Fixing of 8 mm. to 12mm. thick
Vitrified Tile ( of size 600 m.m x 600 m.m ) or equivalent
make confirming to IS specifications having minimum
breaking strength 1400 kg/sq.cm in flooring in all floors at
all heights on 25mm thick bed of cement mortar(1:4) to
proper slope, line and level including cutting to required size
and shape, fixing at corners and splays etc. including filling
the joints with silicon sealant to match the shade of
Vitrified Tile as per the design & drawing including cost,
conveyance, loading, unloading, stacking,royalties and
taxes of all materials, cost of all labour, T & P, sundries,
watering & curing etc. required for the work complete in all
respect as directed by the Engineer-in-Charge.
GF 103.38 Sqm 1070.60 110677.05
20 Providing vitrified tile flooring using Anti skid / vitrified tiles of
premium grade having thickness of 8 to 10mm conforming
to IS 13756 of 600mmX600mm colour/printed series
(homogeneous) of approved quality,colour or equivalent in
dados & skirting on 12mm thick bed of cement mortar of
mix (1:3) laid in proper slope and gradient with screened
and washed sharp sand for mortar and grouted with
required quantities of pigments of approved marks to match
the shades of the vitrified tile if required watering and curing
for 21 days including
cost,conveyance,loading,unloading,royalties and taxes of all
materials,cost of all labour,sundries,T & P required for the
work complete in all respect as directed by the Engineer-in-
charge.
GF 9.60 Sqm 1023.20 9818.61
21 Providing 40mm thick A.S. Flooring in C.C. 1:2:4 (1 cement
: 2 coarse sand : 4 graded stone aggregate ) including
cost,conveyance,loading,unloading,royalties and taxes of all
materials,cost of all labour,sundries,T & P required for the
work complete in all respect as directed by the Engineer-in-
charge.
GF 3377.60 Sqm 352.50 1190604.64
FF 3163.54 Sqm 360.70 1141088.45
EPI 6 SIGN AND STAMP OF BIDDER
SlNo Description of Work Total Qty Unit Rate Amount
22 Supplying, fitting and fixing M.S. grill made out of structural
steel, flats, plates, bars, confirming to IS specification for
windows, ventilators etc. as per drawing and design, fixed to
walls with clamps including 1 priming coat with approved
metal primer and making good to all damages in walls and
floors etc. including cost of all materials, labour,
conveyance, taxes, royalties, scaffolding, sundries, tools
and plants, etc., complete as per the direction of the
Engineer-in-charge.
15770.88 kg 71.10 1121309.44
23 Providing & fittiing up of fixed ventilator/fixed windows /
partition walling using OEL aluminum anodized section
No.9210 &9207 as single groov and double groov
respectively as horizontal &vertical member and OEL
section 4660 as Tapered clip for fixing up of 5mm thick
black glass and jointing angle No.1855 etc complete as per
direction of Engg. in charge.
366.56 kg 437.00 160185.58
24 Supplying, fitting and fixing of Stainless steel of 304 grade in
hand railing using 50mm dia of 2mm thick circular pipe with
Balustrade of size 32mm x 32mm x 2mm @ 0.90mtr. C/C
and stainless square pipe bracing of size 32mm x 32mm x
2mm in 3 rows in stair case as per approved design and
specification, buffing, polishing etc with cost, conveyance,
taxes of all materials, labour, T&P etc. required for the
complete in all respect.
GF 50.54 Rmt 3358.00 169700.56
FF 50.54 Rmt 3360.90 169847.11
25 Providing and painting two coats with synthetic enamel paint
of approved quality and approved shade confirmming to ISI
on steel work to give an even shade in all floors at all height
over a coat of primer of approved quality and shade
including sand papering and making the surface smooth
with cost, coveyance, loading and unloading, and taxes of
all materials, cost of all labour, sundries, T&P, scaffolding
etc. required for the work and complete in all respect as
directed by Engineer-in-charge.
580.93 Sqm 127.80 74243.11
EPI 7 SIGN AND STAMP OF BIDDER
SlNo Description of Work Total Qty Unit Rate Amount
26 Providing & fixing of Dressed seasoned sal wood Chowkath
work framed and fixed (wrought and put up ) in doors
includes all material, labour, tools and plant , tax as per
drawing and directed by Engineer-in-charge.
6.70 Cum 68202.92 457285.23
27 Providing & fixing in position at any location 32 mm thick
ISI marked factory made solid core block board flush door
confirming to IS:2202, Part-1 hot pressed shutter of
approved make both side commercial with well matched
teak 3 ply veneering with vertical grains / cross bands and
face veneers on both faces of shutter of approved make &
quality bounded with phenol formal dehyde synthetic resin,
leaping around complete as specified with lamination of 1
mm thick of approved shade /make & as directed cost
includes of all hardware fitting like cylindrical lock , door
stopper, stainless steel tower bolt, stainless steel hinges, of
approved make etc. cost includes all material, labour, tools
and plant , tax as per drawing and directed by Engineer-in-
charge.
376.10 Sqm 5509.00 2071940.41
28 Providing and fixing 30mm thick “Rajshri”BRAND FACTORY
MADE SINGLE SIDE PANEL PVC DOOR SHUTTER
consisting of frame made from M.S. tubes of 19 gauge
thickness, size 19x19mm forstyiles and 15x15mm for top
and bottom rails. The M.S frame shall have a coat of steel
primers . The M.S frame shall have covered with heat
moulded Rajshri single side prelam PVC “C” channel of
5mm thick sheet and 30x50mm wide to formstyiles and
5mm thick and 75mm wide single side prelam sheet for top
rail, lock rail and bottom rail on other side and 5mm thick,
20mm wide cross PVC sheet as gap insert for top rail and
bottom rail, paneling of 5mm thick PVC sheet fitted in the
M.S. frame welded / sealed to the styles and rails with
5x30mm PVC sheet beading on either side and joined
together with solvent cement adhesive etc., complete as per
manufacturers specification including fixing frames with 4
Nos. M.S. powder coated butt hinges complete including
one 10inch aluminium aldrop and two aluminium tower
bolts of 10 inch and 6 inch and two aluminium handles cost
of all materials, conveyance, loading, unloading, and taxes
of all materials, cost of all labour, sundries, T&P required for
275.47 Sqm. 2503.00 689495.15
29 Providing & fixing factory made (Make :-Rajshri) internal
PVC door frame of size 100mmx45mm with wall thickness
of 5mm made out of extruded 5mm PVC foam sheet , meter
cut at two corner & joined with two numbers 150mm long
bracket of 15mmx15mm squire tube. The two vertical door
profile are to be reinforced with 40mm x20mm tube of 19
gauge throughout the frame. The door frame shall be fixed
to the wall using 65/100mm long MS screws through the
frame by using PVC fasteners. A minimum of 4 numbers of
screws to be provided for is vertical member & minimum two
numbers for horizontal members etc. complete as per
specification and direction of Engineer –in-charge.
865.76 Rmt 339.50 293923.82
30 Supplying, fitting, fixing up powder coated sliding window
made up aluminum Section 9778 , as windows frame
section No.4095,4096 and 9777,3994 as shutter frame with
5mm thick black glass as panel fitted with rubber bending
including locking arrangement including all fitting including
cost of materials all taxes labour, T&P (Including cost of
Glass) etc. complete as per direction of Engineer-in-charge.
580.93 Sqm 3500.00 2033262.00
79,654,701.46
79,654,701.00
Total
SayEPI 8 SIGN AND STAMP OF BIDDER
SlNo Description of Work Qty Unit Rate Amount
1 2 3 4 5 6
ELECTRICAL WORK ( INTERNAL )
I Wiring
1 Wiring to light, ceiling fan, exhaust fan, call bell, 5 A
plug & computer plug points with 1.5sqmm FRLS PVC
insulated 1100 volt grade multistranded copper
conductor wire for phase, neutral and earth continuity
conductor run inside 2mm PVC 20mm/25mm dia
conduit pipe ( ISI mark ) recessed in wall/ column/
ceiling of the building including supply of materials
such as clip-in type modular switches, metallic
concealed box, wire, ceiling rose, angle / batten
holder, junction box etc as per technical specifications
complete with making good the damages caused as
required and as per direction of Engineer-in-charge.
a Single light point controlled by one 5A switch or first
light point of group control.
530 Each 757.00 401210.00
b Ceiling fan point with ceiling fan hook box. (Space
shall be provided for installation of electronic fan
regulator & the blank space should be plugged by
blank plates)
130 Each 757.00 98410.00
c Exhaust fan point 20 Each 757.00 15140.00
d 10A plug on same board 100 Each 800.00 80000.00
e 2x10A plug for computer plug outlet 60 Each 1120.00 67200.00
2 Wiring to light, ceiling fan, exhaust fan, call bell, 5 A
plug & computer plug points with 1.5sqmm FRLS PVC
insulated 1100 volt grade multistranded copper
conductor wire for phase, neutral and earth continuity
conductor run inside 2mm PVC 20mm/25mm dia
conduit pipe ( ISI mark ) recessed in wall/ column/
ceiling of the building including supply of materials
such as clip-in type modular switches, metallic
concealed box, wire, ceiling rose, angle / batten
holder, junction box etc as per technical specifications
complete with making good the damages caused as
required and as per direction of Engineer-in-charge.
a Single light point controlled by one 5A switch or first
light point of group control.
1454 Each 569.00 827326.00
b Ceiling fan point with ceiling fan hook box. (Space
shall be provided for installation of electronic fan
regulator & the blank space should be plugged by
blank plates)
266 Each 569.00 151354.00
c Exhaust fan point 24 Each 569.00 13656.00
d 10A plug on same board 252 Each 600.00 151200.00
ELECTRICAL ESTIMATE
EPI 9 SIGN AND STAMP OF BIDDER
SlNo Description of Work Qty Unit Rate Amount
3 Wiring for circuits and submain with following
number & sizes of FRLS PVC insulated 1100 volt
grade multistranded copper conductor wire run inside
2mm PVC 20mm dia conduit pipe ( ISI mark )
recessed in ceiling/ column/ walls of building including
supply of all materials such as wires, m.s. junction
box & pull box etc complete with making good the
damages caused as required and as per direction of
Engineer-in-charge.
a
2 numbers single core 6 sqmm copper wire for phase
& neutral and 1 number single core 2.5sqmm copper
wire for earth continuity conductor.(from Panel to DB)
680 Metre 310.00 210800.00
b 1 numbers single core 2.5 sqmm copper wire for
phase & neutral and 1 number single core 1.5 sqmm
copper wire for earth continuity conductor(Normal
Power Connection ).
1350 Metre 107.00 144450.00
subtotal I 2,160,746.00
II CABLING
1 Supply, laying & testing of following size of PVC
insulated, PVC sheathed, round/strip armoured
aluminium conductor power cable of 1100 volt grade
clamped as required and laid on surface of wall/
column/ existing RCC/ stone ware/ masonry cable
trench/ cable trey/ through G.I. pipe/ hume pipe as the
case may be, including cost of saddles/ clamps/
markers etc and cable end termination but excluding
the cost of G. I. pipe/ hume pipe complete with
making good the damages caused and as required
and as per direction of Engineer-in-charge.
a 1 Runs 3.5 core x 150 sqmm AYFY( from Main Panel
to Subpanel )
120 Metre 905.00 108600.00
b 1 Runs 3.5 core x 240 sqmm AYFY( from Transformer
to Mainpanel )
50 Metre 1419.00 70950.00
c 1 Runs 3.5 core x 50 sqmm AYFY( from Main Panel to
Subpanel )
300 Metre 362.00 108600.00
d 1 Runs 3.5 core x 25 sqmm AYFY( from Main Panel to
Subpanel )
150 Metre 232.00 34800.00
subtotal II 322,950.00
III PANELS
1 Supply, delivery, installation, testing & commissioning
of L.T. indoor floor/ wall mounted type distribution
boards made out of 2 mm thick CR sheet metal
cubicle fixed on m.s. channel base, duly acid treated
for derusting, primered and painted with 2 coats of
enamel paint of approved shade; dust, damp & vermin
proof ; having hinged door and compartmental
arrangement for each equipment & busbar chamber
on the top of the panel running horizontally; having
provision for cable/ conduit entry, earthing studs as per
specification mentioned below duly factory wired
conforming to the relevant ISS and as per special
conditions of contract making good the damages
caused complete as per the direction of Engineer-in-
charge.
a Academic Block Distribution Board
EPI 10 SIGN AND STAMP OF BIDDER
SlNo Description of Work Qty Unit Rate Amount
NS-1 10way SPN DB
A INCOMER
i) 1 No. 25A DP RCBO.
ii)Class-C transient voltage suppression devices suitable
for 1 phase as per specification
B OUTGOINGS
10 nos.10A / 16A / 20A SP MCB (10KA) as required
Neutral link:
Separate for each outgoing
Earthing Terminals:
Earthing terminals suitable for 10 Nos. outgoing. 36 Nos. 12500.00 450000
NS-2 6 way SPN DB
A INCOMER
i) 1 No. 25A DP RCBO.
ii)Class-C transient voltage suppression devices suitable
for 1 phase as per specification
B OUTGOINGS
6 nos.10A / 16A / 20A SP MCB (10KA) as required
Neutral link:
Separate for each outgoing
Earthing Terminals:
Earthing terminals suitable for 6 Nos. outgoing. 6 Nos. 9500.00 57000
2 Sub Main Panel (Academic Building)
A INCOMER
1 No. 200 amps 4P MCCB(25 KA) with thermal
Magnetic release (PRMB-3) with Class-C transient
voltage surge suppression device suitable for 3
phases as per specifications.
B METERING & INDICATION for each Incomer
i) 1 set of R,Y,B phase indicating lamps
ii) 1 No. (0-500V) Voltmeter with Built-in VSS with 3 nos.
2A SP MCB
iii) 1 No. (0-200A) Ammeter with ASS with 3 nos. 200/5A
CT's
iv) 1 No. Digital Electronic KWH meter(Dual Source).
C BUS-BAR
i) 1 Set of 300A TPN Aluminium Bus Bar with colour
coded PVC Sleeves
D OUTGOINGS
i) 12 Nos. 40A DP MCB (10 KA)
ii) 2 Nos. 40A 4P MCB (10 KA)
Sub Main Panel as described above 1 Nos. 95000.00 95000
3 Sub Main Panel (Boys Hostel) Typical For Girls
HostelA INCOMER
1 No. 100 amps 4P MCCB(25 KA) with thermal
Magnetic release (PRMB-3) with Class-C transient
voltage surge suppression device suitable for 3
phases as per specifications.
B METERING & INDICATION for each Incomer
i) 1 set of R,Y,B phase indicating lamps
ii) 1 No. (0-500V) Voltmeter with Built-in VSS with 3 nos.
2A SP MCB
iii) 1 No. (0-100A) Ammeter with ASS with 3 nos. 100/5A
CT's
iv) 1 No. Digital Electronic KWH meter(Dual Source).
C BUS-BAR
i) 1 Set of 200A TPN Aluminium Bus Bar with colour
coded PVC Sleeves
EPI 11 SIGN AND STAMP OF BIDDER
SlNo Description of Work Qty Unit Rate Amount
D OUTGOINGS
i) 12 Nos. 40A DP MCB (10 KA)
ii) 2 Nos. 40A 4P MCB (10 KA)
Sub Main Panel as described above 2 Nos. 55000.00 110000
4 Sub Main Panel (CCA Building)
A INCOMER
1 No. 63 amps 4P MCCB(25 KA) with thermal
Magnetic release (PRMB-3) with Class-C transient
voltage surge suppression device suitable for 3
phases as per specifications.
B METERING & INDICATION for each Incomer
i) 1 set of R,Y,B phase indicating lamps
ii) 1 No. (0-500V) Voltmeter with Built-in VSS with 3 nos.
2A SP MCB
iii) 1 No. (0-63A) Ammeter with ASS with 3 nos. 60/5A
CT's
iv) 1 No. Digital Electronic KWH meter(Dual Source).
C BUS-BAR
i) 1 Set of 100A TPN Aluminium Bus Bar with colour
coded PVC Sleeves
D OUTGOINGS
i) 7 Nos. 25A DP MCB (10 KA)
ii) 1 Nos. 40A 4P MCB (10 KA)
Sub Main Panel as described above 1 Nos. 45000.00 45000
5 Main Panel
Design, fabrication, assembly, wiring and supply of
front operated dead front cubicle type
compartmentalised as per Form 3B, rear access free
standing, dust and vermin proof (IP 42 ingress
protection) main switchboards suitable for use at 415
volts, 3 phase 4 wire 50 Hertz system suitable for a
symmetrical fault level of 25 kA at 415 volts, fabricated
from 2 mm thick CRCA MS sheets with hinged,
gasketted (metal based neoprene) and lockable doors
having structural reinforcement with suitable
angle/channel/T/flat sections including 3 mm thick
gland plates on top and bottom and including lifting
hooks and including GI earth strip of required size with
2 nos earthing terminals and including powder coated
paint finish of approved shade over metal surface
cleaned and treated with seven tank process complete
with interconnections etc as per specifications, as
required and as below.
A INCOMER
1 No. 400 amps 4P MCCB(25 KA) with protection
release (PRMB-3) with Class-C transient voltage surge
suppression device suitable for 3 phases as per
specifications.
B METERING & INDICATION for each Incomer
i) 1 set of R,Y,B phase indicating lamps
ii) 1 No. (0-500V) Voltmeter with Built-in VSS with 3 nos.
2A SP MCB
iii) 1 No. (0-400A) Ammeter with ASS with 3 nos. 400/5A
CT's
iv) 1 No. Digital Electronic KWH meter(Dual Source).
C BUS-BAR
i) 1 Set of 500A TPN Aluminium Bus Bar with colour
coded PVC Sleeves
D OUTGOINGS
i) 1 No. 200A TP+NL MCCB (25 KA)
EPI 12 SIGN AND STAMP OF BIDDER
SlNo Description of Work Qty Unit Rate Amount
ii) 2 Nos. 100A TP+NL MCCB (25 KA)
iii) 1 No. 63A TP+NL MCCB (25 KA)
iv) 1 No. 63A 4P MCB (10 KA)
v) 1 No. 40A 4P MCB (10 KA)
Main Panel as described above 1 Nos. 320000.00 320000
subtotal III 1,077,000.00
IV Earthing
1 Supply of materials and installation of pipe earth
electrode made out of 50mm dia class B G.I. pipe of
3.0 metre long with arrangements for fitting/
termination of G.I. flat / wire with G. I. nut bolts &
washers including cost of charcoal, salt, foreign soil,
water pouring arrangements, brick masonary
enclosure on top with removable RCC cover complete
with labour for excavation of pit in all kinds of soil &
rock as required and as per direction of Engineer-in-
charge.
12 Each 2336.00 28032.00
2 Supply of materials and laying under ground/ floor/ wall
including making connection at both ends and testing
with following size of hot dip galvanised iron flats for
earthing of equipments, switch boards & panels as
required comlete as per direction of Engineer-in-
charge.
a No 6 SWG G I wire 540 Mtr 17.00 9180.00
subtotal IV 37212.00
V Fittings & Fixtures ( Internal Building )
Supply, delivery, installation and testing of following
types of fluorescent/ CFL tube fitting and fixtures
directly on wall / ceiling/ false ceiling of building with
all accessories such as electronics ballast, fluorescent
tube lights, stove enamelled box, sheet cover etc
complete assembly including supply & fixing of teak
wood round block / PVC square block/ channels or
direct fixied on wall as per suitable condition and
making connection from the suitable point outlet with
flexible wire and complete as per the direction of
Engineer-in-charge.
1 1 x 40 W ( T 5) wall mounted decorative Fittings refer
to Philips cat no : TWG 128 / 2005/865 & 840 or
equivalent type fittings with lamp
1390 Nos. 850.00 1181500.00
2 1 x 18 W CFL for fixing on existing angle holder and
complete with all respect as per the instruction of
engg-in-charge / consultant .
594 Nos. 150.00 89100.00
3 Supply, delivery, installation and testing of following
sweeps of a.c. ceiling fan complete with fan blades,
down rod, canopies, capacitor etc including supply of
sundry materials, making connection from the suitable
point outlet but excluding cost of fan regulator
complete as required and as per the direction of
Engineer-in-charge.
a 900 mm sweep 178 Nos. 2150.00 382700.00
EPI 13 SIGN AND STAMP OF BIDDER
SlNo Description of Work Qty Unit Rate Amount
OSR-1.38 Supply, delivery, installation and testing of clip-in
modular type 400 watt electronic fan regulator
(stepped type) on switch board complete as required
and as per direction of Engineer-in-charge.
178 Nos. 50.00 8900.00
5 Supply, delivery, installation & testing of following
sweeps and speed of exhaust fans suitable for
operation at 250 volt, 50 Hz, a.c. supply complete with
a set of propeller blade, tripod leg for mounting of
motor, ring frame, blades, gravity louvre complete
assembly including supply of sundry materials, making
hole of suitable size for housing of exhaust fan,
making connection from suitable point outlet, making
good the damages caused complete as required and
as per direction of Engineer-in-charge.
a 300mm sweep, 900 rpm. 32 Nos. 3800.00 121600.00
6.00 Supply, delivery, installation & testing of ding-dong
type call bell with remote control and complete
including supply of sundry materials, making
connection from suitable point outlet, making good the
damages caused complete as required and as per
direction of Engineer-in-charge.
4 Nos. 123.00 492.00
subtotal V 1784292.00
VI FIRE ALARM SYSTEM (ACADEMIC BUILDING)
Sub-Head : FIRE ALARM SYSTEM
Supply, installation, testing & commissioning of
conventional Fire Alarm system with 2 zone
complete with indication of fire fault, short , open and
with battery charger indictaion , and panel should be
with battery backup and power amplifer of 600
watt and sufficent wattage for P.A system with
microphone unit inclosed in one housing complete as
required. with certification of EN/ CE
1 Nos. 15000 15000
Supply, installation, testing and commissioning of
Manual Call Point - Resettable type - with back box
complete as required
8 Nos. 1250 10000
Supply, installation, testing and commissioning of
Conventional type hooter wall mounted type rated
at 90 dBA @ 1m for Audible annunciation.
8 Nos. 1250 10000
Supplying and drawing following sizes of FRLS PVC
insulated copper conductor, single core cable in the
existing surface/ recessed steel/ PVC conduit as
required.
2 x 1.5 sq. mm 500 Metre 47 23500
Supplying and fixing of following sizes of steel conduit
along with accessories in surface/recess including
painting in case of surface conduit, or cutting the wall
and making good the same in case of recessed
conduit as required.
25 mm 500 Metre 115 57500
subtotal VI 116,000.00
VII AREA LIGHTING
1 Supplying & installation, testing and commissioning of
prewired, surface mounted wall step light fittings with
9Watt spot light
5 Nos. 1500.00 7500.00
EPI 14 SIGN AND STAMP OF BIDDER
SlNo Description of Work Qty Unit Rate Amount
2 Supplying & installation, testing and commissioning of
prewired, 120W LED FLOOD LIGHT fittings for area
(CG cat No: LSFO-120-CDL or equivalent ). This
luminaire consists ofpressure dia cast housing /
efficient high output emitter LED better distribution /
IP 65 potection / or any other equivallent reputed
make ISI marked as approved) with all accessories
and tubes etc. directly on foundation base including
connections with 3 core x 2.5 sq mm PVC insulated &
PVC round Sheathed, copper conductor, flexible cable
etc.as required and complete with al respect as per
the direction of Engineer - in charge or consultant or
Owner .
5 Nos. 12500.00 62500.00
3 Supplying & installation, testing and commissioning of
prewired, 10W LED BOLLRD LIGHT fittings for
patway (CG cat No: LBLS-10-CDL or equivalent ).
This luminaire consists of inverted pyramid tripod type
LED bollard / better reflection for proper distribution /
IP 65 potection / or any other equivallent reputed
make ISI marked as approved) with all accessories
and tubes etc. directly on foundation base including
connections with 3 core x 0.5 sq mm PVC insulated &
PVC round Sheathed, copper conductor, flexible cable
etc.as required and complete with al respect as per
the direction of Engineer - in charge or consultant or
Owner .
20 Nos. 8,200.00 164000.00
4 S/F of 200 mm x 150 mm x 60 mm (nominal) size
metallic looping end box with hinged cover having one
no. 20 A rating moulded fuse base & holder, 4 A NS
type fuse and 4 way connector to be used in the
bottom of street light pole for cable termination
80 Nos. 500 40000.00
5 Supplying & installation, testing and commissioning of
prewired, 60W LED STREET LIGHT fittings (CG cat
No: LST 0-60-CDL orequivalent ). Streetlight
luminaire with pressure dia cast aluminum housing /
heat resistant glass / better reflection for proper
distribution with IP 65 potection -refer to IS 3553-1956
or any other equivallent reputed make ISI marked as
approved) with all accessories and tubes etc. directly
on wall / pole on M S clamp , nutbolt etc including
connections with 3 core x 0.5 sq mm PVC insulated &
PVC round Sheathed, copper conductor, flexible cable
etc.as required and complete with al respect as per
the direction of Engineer - in charge or consultant or
Owner .( for Road site ) Pole cost is included in the
item.
40 Nos. 18,000 720000.00
6 Supply and fixing of 2.5mm2
PVC Twin core COPPER
wire for connecting to street light fittings
1000 Metre 65.00 65000.00
7 Spply and installation of 6 mm2
twin core aluminium
armoured U.G cable of ISI marked
100 Metre 115.00 11500.00
subtotal VII 1,070,500.00
Total 6,568,700.00
Say 6,568,700.00
EPI 15 SIGN AND STAMP OF BIDDER
3.1.5 Supplying all materials, labours, T&P for laying of
following dia CPVC pipes S.D.R. - 11 as per IS-15778
with ISI mark up to 2nd floor including fixing of
required size CPVC fittings like bend, Tee, elbow,
offsets etc. and the same fixed on wall or floor with
holder bat clamps screw etc. including testing the
joints with required water pressure. The cost inclusive
of all taxes, duties, transportation, scaffolding etc. as
per specification and direction of Engineer-in-charge.
(II) 20mm dia Mtr 905.01 132.40 119822.79
(III) 25mm dia Mtr 225.00 172.80 38880.00
(IV) 32mm dia Mtr 170.00 223.40 37978.00
(V) 40mm dia Mtr 90.00 310.50 27945.00
3.2.17
Providing all material, labour, T&P for fitting & fixing of
following water supply fittings confirming to IS-15778
with ISI mark as per ASTM D-2846 up to 2nd floor
with jointing materials etc. including testing the joints
with required water pressure. The cost inclusive of all
taxes, duties, transportation, scaffolding etc. all
complete as per specification & direction of EIC.
(III) 25mm dia Ball Valve Each 28.00 548 15344.00
(IV) 32mm dia Ball Valve Each 28.00 975 27291.60
(V) 40mm dia Ball Valve Each 8.00 1080 8640.00
3.1.13 Providing all materials, labour, T&P for laying of
following dia UPVC pipes as per IS-4985 with ISI
mark including fixing of requird size UPVC fittings like
bend, Tee, Elbow, Offsets etc, and the same fixed on
wall or foor with holder, bat calmps, screw etc,
including testing the joints with required water
pressure. the cost inclusive of all taxes duties,
transportation, scaffolding etc as er secification and
directio of EIC.
a 40mm dia pipe Mtr 233.00 44.20 10298.60
3.1.10 Providing all labour, T&P for cutting holes in bricks or
stone masonry wall up to 2nd floor for taking pipes
and making good the damages with cement concrete
1:2:4 finished smooth with CP 1:4 to original shape
inclding cost of all materials, curing, conveyance,
taxes, duties etc. all complete as per specification &
direction of EIC,
(I) For 15mm to 50mm dia pipe to pass in 125mm to
250mm thick wall
Each 150.00 27.70 4155.00
3.1.11 Providing all labour, T&P for cutting holes in RCC
chajja/roof/floor up to 2nd floor for taking GI/PVC
pipes through and making good the damages with
supply of all required materials etc. complete as per
specification & direction of EIC,
Each 95.00 87.10 8274.50
3.4.1 (II) Providing all materials, labour & T&P for fitting and
fixing of white glazed vitreous china water closet
(Orissa pattern) of size 580mm x 440mm of approved
make as per IS-2556 with ISI mark up to 2nd floor
fixing on the floor with 32mm PVC long flush bend,
duly embedded in cement concrete (1:4:8) using 4 cm
H.G. Metal, M.S. brackets, cutting the floor and wall
including mending good the damages, including cost
of all materials as per specification and direction of
Engineer-In-Charge.
Each 15.00 1525.00 22875.00
Amount
(sch)
Amount
(Non sch)
PLUMBING WORK
OSR/DSR
NO.Description of Items Unit
Total
QtyRate
EPI 16 SIGN AND STAMP OF BIDDER
Amount
(sch)
Amount
(Non sch)
OSR/DSR
NO.Description of Items Unit
Total
QtyRate
DSR
17.3.1
Supplying all materials, labours, T&P required for
fitting and fixing of white glazed vitreous china
Europian Water closet with S Trap of approved type
as per IS-2556 with ISI mark to the floor with wooden
plug and chromium plated pedestal screws including
jointing the trap with soil pipe in cement mortar (1:1)
fixing plastic seat cover for water closet with CP brass
hings & rubber buffer etc. all complete with cost of
taxes and conveyance as per the direction of
Engineer-in-charge.
Each 76.00 4593.75 349125.00
3.4.6 Providing all materials, labours, and T&P for fitting
and fixing of PVC low level cistern complete with all
internal fittings of approved make as per IS-7231 with
ISI mark and providing necessary PVC wall plug,
screws and 15mm dia PVC water connecting pipe
with union at each end etc. as per specification all
complete as per direction of Engineer-In-Charge.
Each 15.00 1432.00 21480.00
NS Supplying and fixing of white glazed vitreous china
Urinal of approved size including cost of water
spreader & Bottle trap. All complete with cost of
conveyance & taxes, materials, labours, T&P etc. as
per the direction of Engineer-in-charge.
Each 12.00 9500.00 114000.00
3.4.32 Providing and fixing frosted safety glass Urinal
partition of size 450x900mm for standing urinal of
Jaquar complete including cutting the wall and making
good the damages, including cost of all materials
complete as per PH specification and direction of
Engineering-in-charge.
Each 16.00 2545.00 40720.00
DSR
17.7.3
Supply all materials and labours for fitting and fixing of
following size white glazed vitreous china wash hand
basin of approved make as per IS-2556 with ISI mark
up to 2nd floor, supply & fixing of 32mm PVC waste
pipe, 15mm dia PVC water connection pipe, basin
bolts & nuts of approved quality including cutting the
walls & floors and making good the damages with
cement concrete (1:2:4) etc. with all taxes, duties,
transportation etc. all complete as per direction of
Engineer-In-Charge.
a 550mmx400mm size WHB Each 71.00 2095.30 148766.30
NS Supplying all materials, labour, T&P and fixing
standard sized CP Grab Bar 300mm Long complete
including cutting the wall and making good the
damages, including cost of all materials complete as
per PH specification and direction of Engineering-in-
charge.
Each 1 1500.00 1500.00
3.4.26 Supplying all materials, labour, T&P and fixing Mirror of superior glass mounted on 6mm thick A.C sheet or
plywood sheet and fixed to wooden plugs with CP
screws and washers complete as per specification
and direction of the Engineer in charge.
(I) 600mmx450mmx5mm thick bevelled edge mirror. Each 27.00 610.00 16470.00
EPI 17 SIGN AND STAMP OF BIDDER
Amount
(sch)
Amount
(Non sch)
OSR/DSR
NO.Description of Items Unit
Total
QtyRate
3.4.14(a) Providing all materials and labour for fitting and fixing
of following sizes of Stainless Steel Kitchen Sink
made out of 0.8mm thick sheet with coupling &
strainer, up to 2nd floor the flat boards for correct
sandwitch between the platform top & grinite/marble
slab & making good the damages, fixing of 32mm dia
PVC waste pipe etc. incluing testing, comissioning all
complete as per specification & direction of the
Engineer-in-charge.
Each 4.00 6480.60 25922.40
ORS/NS Providing all materials, labour, T&P and fittings and
fixing of different water supply (CP on Brass) up to
2nd floor fitting as per IS specification & approved
make of following sizes and specification with leak
proof threaded joints with spun yarn and white zinc or
any other method as required and directed including
all taxes, duties, transportation etc., testing and
rectification of defects after testing complete as per
direction of Engineer-in-charge.
3.2.14(IV) Short body Bib cock with wall flange Each 34.00 520.00 17680.00
3.2.14(VI) Long body Bib cock with wall flange Each 4.00 638.00 2552.00
3.2.16 (VI) Angle Stop cock with wall flange Each 220.00 480.00 105600.00
3.2.16 (V) Concealed Stop Cock Each 71.00 600.00 42600.00
3.4.21 (I) Pillar cock Each 71.00 637.00 45227.00
3.4.30(II) C.P. Soap Dish Holder Each 69.00 90.00 6210.00
NS Soap Dispenser Each 30.00 800.00 24000.00
3.4.29(I) Towel Ring with round flange Each 30.00 494.80 14844.00
3.4.28 (I) CP Towel Rail of 600mm long Each 71.00 926.40 65774.40
NSHealth Faucet with 1.00m long PVC tube & wall hook
Each 93.00 1400.00 130200.00
NS Stainless steel grating Each 190.00 550.00 104500.00
NS 101mm dia. Round Cockroach Guard Grating Each 7.00 650.00 4550.00
3.3.2 Supplying all materials, labour, T&P for fitting and
fixing of UPVC SWR pipes (Type-A) (Ringfit) up to
2nd floor of approved make confirming to IS
13592/1992, both below & above groud level or fixing
on wall surface in all floors including all taxes, duties,
transportation & scaffolding etc. all complete as per
specification & direction of the Engineer-in-charge.
(II) 110mm dia pipe Mtr 790.00 184.70 145913.00
(I) 75mm dia pipe Mtr 80.00 107.50 8600.00
NS Supplying all materials, labour, T&P for fitting and
fixing of the following dia UPVC SWR (Ringfit) fittings
up to 2nd floor of approved make confirming to IS
14735 with all taxes, duties, transportation & requisite
testing as per specification & direction of the Engineer-
in-charge.
1 110mmX87.5° PVC door bend Each 32.00 500.00 16000.00
2 110mmX45° PVC plain bend Each 33.00 320.00 10560.00
3 110mm dia Vent Cowl Each 33.00 90.00 2970.00
4 125mmx110mm 'P' Trap with lip ring Each 154.00 400.00 61600.00
5 110mm x 110mm 'P' Trap Each 61.00 300.00 18300.00
6 110 dia Nahani Trap with Jali Each 31.00 300.00 9300.00
7 110mm WC connector with lip ring Each 105.00 200.00 21000.00
EPI 18 SIGN AND STAMP OF BIDDER
Amount
(sch)
Amount
(Non sch)
OSR/DSR
NO.Description of Items Unit
Total
QtyRate
3.3.2 Supplying all materials, labour, T&P, fitting and fixing
UPVC SWR Rain water pipes (Type-A) (Ringfit) up to
3rd floor of approved makeconfirming to IS-
13592/1992, both below & above ground level or
fixing on wall surface in all floors including all taxes,
duties, transportation & scaffolding etc. all complete
as per specification & direction of Engineer-in-charge.
a 110mm dia. Pipe Mtr 320.00 184.70 59104.00
3.1.8 Supplying all materials,labour,T&P and fixing
Rotational moulded polyethylene cyndrical vertical
water storage tanks of 2000 ltr capacity confirming to
IS:12701-1996 including cutting holes through the
tank and fixing mild steel tubes and fittings and
providing extra sockets and jam nuts,fixing ball valve
etc,including hoisting upto a height of 6 mtr above
ground level and placing the tank to the required
position including conveyance of all materials to
worksite etc all complete as per specification and
direction of Engineer-in-charge.
Each 14.00 11246.00 157444.00
4.1.4 Providing and laying in trench cement concrete ( 1:3:6
) with 40mm size hard granite metal in the following
type of bedding for UPVC SWR pipes of the following
internal diameter including curing complete as per
specification & direction of EIC.
a 110mm dia Mtr 790.00 369.20 291668.00
DSR 19.4.1 Providing all material, labour, T&P and construction of
Gully Trap chamber of size as mentioned below with
250mm nominal size flyash Brick having crushing
strength not lessthan 75kg/sqcm in CM 1:4 over a
bed of 100mm thick C.C. (1:3:6) using 40mm size HG
metal, plastering with 12mm thick cement plaster with
cement punning in cement mortar 1:4 on inner
surface and 12mm thick cement plaster in cement
mortar (1:4) on extermal surface fitting and fixing of
pvc gully trap and pre cast factory made SFRC over
with frame of opening size 260mmx260mm moulding
and shaping the channel and benching with C.C.
(1:2:4) with hard granite chips 12mm size, earth work
excavation in all kinds of soil and rock, and filling the
cavity of the chamber with excavatd and selected
earth levling the surface around the chamber with
disposal of surplus earth with in 50m lead as per
specification, design & drawing including cost of
curing & all taxes, royality, cost, conveyance etc. all
complete as per specification and direction of
engineer in charge.
19.4.1.2 Inner size 300mmx300mmx450mm depth Gully Trap
chamber
Each 28.00 1619.55 45347.40
EPI 19 SIGN AND STAMP OF BIDDER
Amount
(sch)
Amount
(Non sch)
OSR/DSR
NO.Description of Items Unit
Total
QtyRate
DSR 19.30 Supplying all materials,labours,T&P and constructing
inspection chamber with Fly Ash bricks of size
25cmx12cmx8cm having crushing strength not less
than 75kg/Sqcm in C.M. (1:4) with cement concrete
(1:3:6) on bed with hard granite metal size 40mm of
150mm thick, 125mm thick RCC M25 cover slab with
supplying fitting and fixing of medium duty SFRC
(medium duty) manhole cover, moulding and shaping
the channel and benching with cement concrete
(1:2:4) using 12mm size hg chips, earth work
excavation in all kinds of soil/rock including back
filling with selected excavated earth duly watered &
rammed, 12mm thick cement plaster in cement mortar
(1:3) with punning to inside, cement plaster in CM
(1:3) to outside the chamber including centring,
shuttering, providing required quantity of MS rods and
binding wires for reinforcement, bending, binding,
tying the grills and placing in the proper position and
drawing and design and specification including cost,
conveyance, royalty, taxes etc for all materials all
complete as per the drawing, design and direction of
Engineer-in-charge.(As per IS 4111 P1-1967)
19.30.3 Inner size 750mmx750mmx500mm depth Each 11.00 6350.45 69854.95
3.2.13 Providing all materials, labour T&P for making Ferrule
connection of the following nominal bore including
drilling the water main (C-I pipe / DI Pipe) earth work
excavation in all kinds of soil, back-filling, de-watering
(If Required) with required CPVC pipe & fittings and
connection to existing pipe line all complete as per
specification and direction of EIC.
a 15/20mm dia nominal bore Each 8 785.2 6281.60
TOTAL OF INTERNAL PLUMBING 2008689 518480
Grand total 2527169
EPI 20 SIGN AND STAMP OF BIDDER
I
Providing and fixing black steel pipes to IS:1239
(Heavy class) including all fittings like anchor
fasteners, brick masonry supports, couplings,
bends, elbows, tees and flanges etc. welded or
screwed joints as required, cutting holes and
chases in brick or RCC walls and making good
complete.
1.1 25 mm dia Metre 40 405.00 16200
1.2 50 mm dia Metre 121.8 648.00 78900
1.3 65 mm dia Metre 700 804.00 562800
2
Providing and fixing first aid fire hose reel wall
mounting swinging type fitted with 36.5 M x 20
mm dia high pressure RUBBER hose to IS: with 5
mm outlet gunmetal nozzle with shut off valve
(IS:884-1969).
Each 28 8044 225232
0
3
Providing and fixing standard short size gunmetal
branch pipe with gunmetal nozzle 16 mm NB
outlet with standard instantaneous type 63 mm
dia coupling.
Each 28 1864 52192
0
4Providing and fixing standard fire man's axe with
heavy duty insulated rubber handle.Each 28 602 16856
0
5Providing and fixing single acting air valve with
screwed inlet 25 mm dia.Each 14 1157 16198
0
6
Providing and fixing fire hose cabinet fabricated
from 16 gauge M.S. Sheet with single or double
glazed front door (with 4 mm thick glass) and
locking arrangement, painted fire red with stove
enamelled paint "FIRE HOSE" written on front
including necessary supports approximate size.
0
a) 9000x750x750 mm deep. Each 28 6700 187600
0
7
Painting M.S. pipes and fittings two or more
coats of synthetic enamel paint of approved
quality and shade over a coat of ready mixed red
lead primer:
0
a) 25 mm dia Metre 40 27 1080
b) 50 mm dia Metre 100 35 3500
c) 65 mm dia Metre 700 40 28000
0
FIRE FIGHTING WORKS
S.
No.Description of items
UnitTotal
Qty.Rate Amount
FIRE SUPPRESSION SYSTEM
EPI 21 SIGN AND STAMP OF BIDDER
S.
No.Description of items
UnitTotal
Qty.Rate Amount
8
Providing and fixing lever operated butterfly valve
conforming to IS:13095-91 including necessary
companion flanges, bolts and nuts complete.0
a) 65 mm dia Each 20 2000 40000
0
9
Providing and fixing cast iron double flanged
horizontal type non-return valves including nuts,
bolts, 3 mm thick insertion rubber gasket
complete to IS:5312 (PIN 1.6).
0
a) a)65mm dia Each 20 4050 81000
0
10
Providing and fixing dial type pressure gauge with
isolation cock and pipe at hydrant station. 0
a) Dia diameter 100 mm calibration 0-8 Kg. Each 20 705 14100
0
11
Providing and installing horizontal/vertical
monobloc centrifugal pumping set with
mechanical seal, C.I. volute and bronze impeller
connected to a TEFC induction motor suitable for
400/44 volts, 3 phase, 50 cycles A.C. supply with
150 mm dia pressure gauge with gunmetal
isolation cock, vibration eliminating pads for fire
pump at terrace level including motor control
panel at terrace level and remote push button for
OFF/ON operation in Fire Control Room. (Fire
pump on terrace)
0
Capacity 450 lpm 0
Head 40 m 0
HP 10 Each 3 44450 133350
0
12
Supplying, Installation, Testing and
Commissioning of double flanged vertical air
vessel fabricated shell from 8 mm thick & dished
ends 10 mm thick M.S.plate, 450 mm dia and 2.0
m high common for fire hydrant, pump complete
with two numbers pressure switches to operate
terrace booster pumps at drop of pressure as
given in the specifications.
Each 6 16000 96000
0
13
Providing and fixing resilient rubber neoprene
lined style arch vibration eliminators suitable for
raw water upto 45 deg. C. temperature working
pressure upto 8 Kg/Sqcm
0
a) 65 mm dia Each 3 2050 6150
EPI 22 SIGN AND STAMP OF BIDDER
S.
No.Description of items
UnitTotal
Qty.Rate Amount
TOTAL FOR FIRE SUPPRESSION SYSTEM1559158
II HAND APPLIANCES
14
Providing and fixing CO2 type fire extinguishers
with steel cylinder with a discharge valve and
conforming to IS:15683. Extinguishers shall be
painted with rex enamel paint and fixed to wall
with brackets capacity 4.5 Kg.
Each 18 6400 115200
0
15
Providing and fixing water CO2 gas fire
extinguishers with steel cylinder with a discharge
valve and conforming to IS:940. Extinguishers
shall be painted with rex enamel paint and fixed
to wall with brackets capacity 9 litre.
Each 18 2350 42300
0
16
Providing and fixing ABC powder type fire
extinguisher suitable for inverted operation and
fabricated from 1.6 mm M.S. sheet internally
protected with anticorrosive treatment and
hydraulically tested to a pressure of 25 Kg/Sqcm.
Extinguishers externally painted with red enamel
and fixed to wall with brackets complete with
internal charge and spanner (Conforming to
IS:13849 capaicity 6 Kg.).
Each 18 3550 63900
TOTAL FOR HAND APPLIANCES 221400
1780558GRAND TOTAL FOR FIRE FIGHTING =
EPI 23 SIGN AND STAMP OF BIDDER
SlNo Description of WorkTotal
QtyUnit Rate Amount
1 2 3 4 5 6
1 Supplying all material,equipments, labour &
conducting reconnaissance survey, integrated
Hydrological & Geophysical (Electrical Resistivity
method) survey & selection of potential source
for exploration of Ground water including
selection and recommendation of site for drilling
production wells in the area under the following
Geological formation.
Hard rock granite /sedimentary terrain upto200
mtr.
1.00 Each Job 3,000.00 3,000.00
2 Labour for drilling a perfectlybore hole for
specified dia for specified depth below G.L
through consolidated and unconsolidated rocks
with fast drilling sophisticated DTH/combination
rig to suit the site condition as per the direction of
the Engineer-in-charge including use of own Rigs
with it accessories, T&P consumables etc.,for
lowering of 200mm dia GI/PVC pipe for housing
fitted with socket and with or with out well screen
as per necessity for soft , medium, hard &
boulder formation (GI/PVC/MS casing pipe if
required to prevent collapse of over burden is to
be provided by the contractor including lowering
and withdrawing after completion of Tube well)
200mm doa to 400mm dia in overburden portion
including packing of gravel suppiled by the
contractor for 400mm dia bore only.
a) 200 mm dia
1) 0 Mtr to 30 Mtr 30.00 Each Mtr 974.78 29,243.40
2) 30 Mtr to 100 Mtr 70.00 Each Mtr 1,074.45 75,211.50
3 Lowering the following size of G.I. /PVC/MS
housing pipe with or without slotted pipes as per
the necessity from ground level up to 45mtr
depth fitted and fixed up in perfectly vertical
position including cutting & threading of pipes &
slotted pipes & supplying & fixing all jointing
materials, tools & plant etc. all complete &
keeping the top of casing pipe threaded including
plugging tube-wells to prevent entry of foreign
materials and keeping the casing pipe 1.00mtr
above GL.
a) 200 mm dia
1) 0 Mtr to 30 Mtr 30.00 Each Mtr 76.08 2,282.40
2) 30 Mtr to100 Mtr 70.00 Each Mtr 99.29 6,950.30
4 Cleaning and developing the tube well with their
own compressor continuously worked till clear
and adequate discharge is obtained from the
tube well including supply and use of all
necessary equipments and labour as per
direction of Engineer-in-charge. 1.00 Each No 3,343.50 3,343.50
BOREWELL
EPI 24 SIGN AND STAMP OF BIDDER
SlNo Description of WorkTotal
QtyUnit Rate Amount
5 Supplying all materials, labour, T&P and
providing sanitary sealing by cement concretes
grouting of annular space around G.I./PVC/M.S.
Housing pipe up to 5 meters below G.L. to plug
the bore including cost of cement etc all
complete as per the direction of Engineer-in-
charge minimum one mtr casing pipe to be
inserted in the bore into the rock at the bottom to
ensure sanitary sealing. 1.00 Each No 1,067.38 1,067.38
6 Supplying all materials, labour, T&P for fitting
and fixing of PVC casing pipe (ASTM D 1785
Sch-80) of following dia with socket including
cost of all materials, all taxes, all labour,
transportation to sites etc. complete as per PH
specification & direction of Engineer-in-
charge.(MAKE:SUPREME PVC PIPES)
150 mm dia pvc Pipes 60.00 Each Mtr 997.18 59,830.80
7 Providing, fitting and fixing and laying of rigid
PVC (ASTM D 1785 Sch-80) pipe threaded at
both ends, complete with required galvanized
iron fittings, confirming to laid below and above
ground level both in horizontal and vertical
position, including cutting the pipes to sizes,
threading, jointing with sockets, testing to
required pressure head, excavation of the pipe
line trenches up to a depth of 0.80mt in all kinds
of soil and rock, refilling the trenches with
excavated soil in layers of 30 cm with supply of
all materials all complete as per PH
specification & direction of Engineer-in-
charge.(MAKE:SUPREME )
a)50mm dia PVC pipe 80.00 Each Mtr 288.00 23,040.00
8 Supplying fitting, fixing of 1.00 HP submersible
pump , Make (CROMPTON GREAVES) with
control panel,2nos S.S tapper ,M.S nuts & bolt &
cap suitable for the above pump sets including
cost of all materials, transportation and taxes of
pump etc. complete as per PH specification &
direction of Engineer-in-charge.
1.00 Each Set 12,800.00 12,800.00
9 Supplying, fitting and fixing of 3core flat industrial
cable (4sqmm) for submission conforming to IS
694 Flexible 1100V. To IS 694. including all cost
of material, labour, T&P etc
allcomplete.(Make:Havels/Finlox/Equivalent.
180.00 Each Mtr 142.45 25,641.00
10 Supplying all material, labour, T &P for
installation of submersible pump set and starter
including supplying of hanger plate & nylon rope
ect. all complete including testing and
commissioning as per direction of the Engineer-
in-charge. 1.00 Each No 2,000.00 2,000.00
11 Chemical & bacteriological testing of water
sample after completion of production well. 1.00 Each No 1,500.00 1,500.00
Total Rs 245,910.28
Say 245,910.00
EPI 25 SIGN AND STAMP OF BIDDER
SlNo Description of Work Total Qty Unit Rate Amount
1 2 3 4 5 6
1a Excavation in ordinary soil for foundation including dressing
and levelling the bed and depositing the soil within 50m. initial
lead and 1.5m.initial lift including rough dressing and breaking
clods to maximum 5cm. to 7cm. and laying in layer
83.96 Cum 89.20 7489.23
5 Providing and laying P.C.C. (1:3:6) in foundation trench and
below flooring using 40mm down graded chrusher broken HG
Metal, including compaction, curing including cost of all
materials and labour etc. complete as per direction of Engineer-
In -Charge.
17.38 Cum 4206.90 73115.92
6 Fly ash brick masonry using Fly ash bricks of size 25cm x 12
cm x 8 cm having crushing strength not less than 75 kg. Per
Sqr. Cm. In cement mortar of mix(1:6) with cement and
screened and washed sharp sand for mortar after immersing
the bricks for 6 (six) hours in water before use in foundation,
plinth, basement and for ornamental flower beds, plinth
moulding and similar such type of works with all necessary
projections, splays cutting, circular moulding, corbelling,
chamfering, watering and curing etc. including cost,
conveyance, loading unloading, royalties and taxes of all
materials and cost of all labour, sundries, T & P required for
the works etc. complete in all respect as directed by the
Engineer-in-Charge.
27.65 Cum 3797.50 105000.88
7 R.C.C. work of M20 using 20mm and down graded hard
granite crusher broken chipes including laying,hosting,centring
& shuttering with all cost,conveyance of material etc.complete.
I FOUNDATION & PLINTH
Footing & Pedestal 12.20 Cum 5158.72 62936.40
II SUPERSTRUCTURE
Column in superstructure
GF 161.30 Cum 8689.10 1401573.55
8 Supply M.S. reinforcement for R.C.C. work including cutting,
bending, binding and tying the grills and placing in position
including cost of reinforcement and binding wire 18 to 20
gauge.
GF 19.65 Qntl. 5057.30 99375.95
9 Fly ash brick masonry using Fly ash bricks of size 25 cm. x 12
cm. x 8 cm. having crushing strength not less than 75 kg. Per
Sqr. Cm. in cement mortar of mix (1:6) with cement after
immersing the bricks for 6 (Six) hours in water before use in
superstructure including splays cutting, circular moulding,
corbelling, chamfering and similar such type of works, watering
and curing etc. including cost, coveyance, loading and
unloading, royalties and taxes of all materials and cost of all
labour, scaffolding, sundries, T&P required for the works etc.
complete in all respect as directed by the Engineer-in-charge.
GF 39.04 Cum 3830.80 149554.43
BOUNDARY WALL
EPI 26 SIGN AND STAMP OF BIDDER
SlNo Description of Work Total Qty Unit Rate Amount
10 12 m.m thick cement plaster in cement mortar of mix (1:6) in
all floors at all height using screened & washed sharp river
sand for mortar with approved quality of cement, finished
smooth to the even surface of the brick masonry walls after
racking out the joints properly ,providing grooves wherever
necessary including cost, conveyance, loading,
unloading,stacking, royalties and taxes of all Materials, cost of
all Labour, T&P, Sundries , Scaffolding, Watering,
Curing,Rounding of corners etc. required for the work
complete etc. as directed by the Engineer- in -charge.
GF 189.00 Sqm 132.40 25023.60
11 16 m.m thick cement plaster in cement mortar of mix (1:6) in
all floors at all height using screened & washed sharp river
sand for mortar with approved quality of cement, finished
smooth to the rough surface of the brick masonry walls after
racking out the joints properly ,providing grooves wherever
necessary including cost, conveyance, loading,
unloading,stacking, royalties and taxes of all Materials, cost of
all Labour, T&P, Sundries , Scaffolding, Watering,
Curing,Rounding of corners etc. required for the work
complete etc. as directed by the Engineer- in -charge.
GF 189.00 Sqm 138.90 26252.10
22 Supplying, fitting and fixing M.S. grill made out of structural
steel, flats, plates, bars, confirming to IS specification for
windows, ventilators etc. as per drawing and design, fixed to
walls with clamps including 1 priming coat with approved
metal primer and making good to all damages in walls and
floors etc. including cost of all materials, labour, conveyance,
taxes, royalties, scaffolding, sundries, tools and plants, etc.,
complete as per the direction of the Engineer-in-charge.
141.75 kg 71.10 10078.43
31 Fencing with angle iron post placed at required distance
embedded in cement concrete blocks, every 15th post, last but
one end post and corner post shall be strutted on both sides
and end post on one side only and provided with horizontal
lines and two diagonals interwoven with horizontal wires, of
barbed wire weighing 9.38 kg per 100 m (minimum), between
the two posts fitted and fixed with G.I. staples, turn buckles etc.
complete. (Cost of posts, struts, earth work and concrete
work to be paid for
separately). Payment to be made per metre cost of total length
of barbed wire used.
With G.I. barbed wire
105.00 RMT 12.95 1359.75
Total 1,961,760.24
Say 1,961,760.00
EPI 27 SIGN AND STAMP OF BIDDER
Sl.
No.Description of work Quantity Unit Rate Amount
1 2 3 4 5 6
A
1 Clearing and grubbing road land including
uprooting rank vegetation, grass, bushes, shrubs,
saplings and trees girth up to 300 mm, removal of
stumps of trees cut earlier and disposal of
unserviceable materials and stacking of serviceable
material to be used or auctioned, up to a lead of
1000 metres including removal and disposal of top
organic soil not exceeding 150 mm in thickness, with
cost of all labours, materials , T&P etc. as required
for the work complete as per the direction of
Engineer-In-Charge.
0.02 Hector 36646.50 824.55
2 Earthwork in Excavation in ordinary soil within 50m,
initial lead and 1.5m, initial lift including rought
dressing and breaking clods to maximum 5cm to 7cm
and laying in layers not exceeding 0.3m in depth and
as per direction of the Engineer-incharge.
33.75 Cum 74.30 2507.63
3 Construction of embankment with approved materials
deposited at site from roadway cutting and
excavation from drain (not exceeding 0.6 m depth)
and foundation of other structures graded and
compacted to meet requirement of Tables 300.1 and
300.2 as per Technical Specification Clause 301.5
MORD/ 305 MORTH including overhead & Contract
profit but excluding VAT
33.75 Cum 117.53 3966.49
4 Construction of embankment with approved material
obtained from borrow area with all lifts and leads,
transporting to site by mechanical means, within a
leads of 15 Kms, spreading, grading to required
slope and compacting as per requirement including
cost of all labours, Materials,Sundries T&P etc. as
required for the work complete as directed by the
Engineer-in-charge.
33.75 Cum 539.50 18208.13
5 Construction of sub-grade and earthen shoulders
with approved material obtained from borrow pits with
all lifts & leads, transporting to site, spreading,
grading to required slope and compacted to meet
requirement of table No. 300-2. including cost of all
labours, loading, unloading of materials, sundries,
T&P etc. as required for the work , complete as per
the direction of Engineer-In-Charge
112.50 Cum 729.20 82035.00
C.C. ROAD
LENGTH ROAD-100M
EPI 28 SIGN AND STAMP OF BIDDER
Sl.
No.Description of work Quantity Unit Rate Amount
6 Construction of granular sub-base by providing close
graded material, spreading in uniform layers with
motor grader on prepared surface, mixing by mix in
place method with rotavator at OMC, and compacting
with vibratory roller to achieve the desired density,
complete as per clause 401( Grade ii). Including cost
of all labours, loading & unloading of materials,
sundies, T&P required etc. as required for the work,
complete as per the direction of Engineer-In-Charge.
33.75 Cum 1756.30 59275.13
7 Supplying and filling with sand well watered and
rammed in layers not exceeding 23 cm In depth over
GSB including cost of conveyance, loading,
unloading, royalties and taxes of all materials, cost of
all labour, sundries, T&P required for the work etc.
complete in all respect as directed by the Engineer-in-
Charge. Measurement will be taken on finished
compacted section only).
33.75 Cum 410.30 13847.63
8 Providing and laying Plain Cement Concrete of
proportion (1:3:6) over sand filling using 40 mm
size crusher broken H.G Stone Metal free from
weathered skins, cement and screened & washed
sharp river sand for mortar of approved quality &
from approved quarry including hoisting, lowering
and laying concrete to the required level, ramming,
watering & curing etc complete to required levels,
laid in layers not exceeeding 15cm thick in each layer
including cost of conveyance ,
loading,unloading,royalties and taxes of all materials,
cost of all labours, Sundries, T&P required for the
work including shoring, shuttering and dewatering ( if
required) including hire and running charges of water
pump required for the work etc complete in all
respect as directed by the Engineer-in-charge.
33.75 Cum 4287.00 144686.25
9 Providing and laying Plain Cement Concrete of
proportion (1:2:4) in foundation using 12 mm size
crusher broken H.G Stone Metal free from weathered
skins ,cement and screened & washed sharp river
sand for mortar of approved quality & from approved
quarry including hoisting, lowering and laying
concrete to the required level, ramming, watering &
curing etc complete to required levels, laid in layers
not exceeeding 15cm thick in each layer including
cost, conveyance , loading,unloading,royalties and
taxes of all materials, cost of all labour, Sundries,
T&P required for the work including shoring,
shuttering and dewatering ( if required) including hire
and running charges of water pump required for the
work etc complete in all respect as directed by the
Engineer-in-charge.
67.50 Cum 5380.00 363150.00
10 Providing & fixing Rigid Smoth Centering &
shuttering for R.C.C. works in sub-structure including
false works and dismantling them after casting
including cost of all labours, materials, sundries, T&P
etc. as required for the work complete as per the
direction of Engineer-In-Charge.
EPI 29 SIGN AND STAMP OF BIDDER
Sl.
No.Description of work Quantity Unit Rate Amount
a Foundation 52.50 Sqm 92.90 4877.25
11 Supplying all matrerials & labours for the construction
of Cement Concrete Kerb with Top & Bottom width
115 & 165 mm respectively, and of height 250 mm.
Providing M20 grade R.C.C. for the Kerb & M10
grade P.C.C. for the kerb foundation of thickness
150mm having 50mm projection of the foundation
beyond the kerb stone & Laying the kerb stone by
kerb laying Machine & the foundation concrtete
manually including the cost of all labours, loading,
unloading & taxes of all materials, conveyance, T&P
etc required for the work complete in all respect as
per the direction of Engineer-In-Charge.
75.00 Rmt 284.17 21312.75
12 Providing and painting two coats with synthetic
enamel paint of approved quality and approved
shade confirmming to ISI on the vertical wall of the
kerb to give an even shade over a coat of primer of
approved quality and shade including sand papering
and making the surface smooth with cost of
coveyance, loading, unloading, and taxes of all
materials, cost of all labour, sundries, T&P etc.
required for the work and complete in all respect as
directed by Engineer-in-charge.
46.13 Sqm 127.80 5894.78
13 Hire charges of vibrator @ 2.5cum of concrete/hr 41.00 hrs 106.00 4346.00
14 Providing Salitex Board to expansion joints 6.00 Sqm 593.00 3558.00
15 Add for Cross Drainage works 2.00 Nos 25000.00 50000.00
778,489.56
B
1 Earth work in excavation of foundation of structures as per
drawing and technical specification, including setting out,
construction of shoring and bracing, removal of stumps and
other deleterious matter, dressing of sides and bottom and
backfilling with
26.36 Cum 140.2 3695.672
2 Filling sand of approved quality as per approved drawing
and direction of the Engineer-in-charge including cost,
conveyance, royality taxes of all materials conforming to
the MORTH techanical specification.
7.53 Cum 410.3 3089.559
3 Cement concrete (1:4:8) Levelling coarse with 40 mm size
C.B. Metal of approved quality as per approved drawing
and direction of the Engineer-in-charge including cost,
conveyance, royality taxes of all materials conforming to
the MORTH techanical specification.
7.53 Cum 3856.8 29041.704
SUB TOTAL (A) =
EPI 30 SIGN AND STAMP OF BIDDER
Sl.
No.Description of work Quantity Unit Rate Amount
4 Cement concrete M-20 grade RCC in foundation and wall
as per approved drawing and direction of the Engineer-in-
charge including cost, conveyance, royality taxes of all
materials conforming to the MORTH techanical
specification.
a) Top Slab (50% covered slab) 7.50 Cum 8601.9 64514.25
Slab 11.30 Cum 5290.6 59783.78
c) Wall (Both side) 30.00 Cum 8234.9 247047
5 Supplying, fitting and placing HYSD bar reinforcement in
sub-structure complete as per drawing and Technical
Specifications
19.52 MT 5267 102811.84
509983.805
1,288,473.37
1288473.00
SUB TOTAL (B) =
Grand Total (A+B) =
SAY =
EPI 31 SIGN AND STAMP OF BIDDER