vol gen3 - lamar lighting company, inc.€¦ · 3.5” 6” 36” 7.8”.875 ko 6” 4x 0.25”...
TRANSCRIPT
Certi�cation & Listings:Project Information:
Fixture Type:
Date:
Job Name:
Comments:
Catalog #:
VOL Gen3 Voyager series withultrasonic motion sensor
Ordering Guide / Example
The Voyager series is part of our Occu-Smart® product line. Equippedwith an integral ultrasonic motion sensor, the VOL features bi-leveloperation with adjustable standby light levels and time delay formaximum energy savings. These luminaires are ideal for corridors,stairwells, restrooms, laundry rooms and other areas where maximumlight levels are not required on a constant basis
Ultrasonic motion sensors are ideal for stairwells and corridors where 360˚ coveragecan detect motion beyond the line of sight around barriers such as staircases,workspace partitions, shelves and other obstacles in the area
See page 2 for lumen chart, dimensions & application notes
LaMar Lighting Co., Inc. 485 Smith Street, Farmingdale, NY 11735 | tel 631.777.7700 fax 631.777.7705 | www.lamarled.com
VOL A ASSeries
VOL = Voyager Gen3
Size
24 = 2’ nominal48 = 4’ nominal
Power
A = Adjustable power userselectable output powerSee chart on back*DLC quali�ed when driverswitched to low power setting(factory default)
Lens Options
FA = Frosted impactresistantPF = Perforated metal(white)
CCT
30 = 3000K35 = 3500K40 = 4000K50 = 5000K
Standby Options
AS = User selectable standbyoptions 10, 20, 30 & 40% nominallight output (factory shipped 10%standby level)
General Options
EM = Emergency pack >90 min.,>500 lumens(higher output & run timeavailable - consult factory)
Consult factory for additional options not shown or listed Correlated Color Temperatures (CCTs) fall within the nominal range as per ANSI C78.377A
S3
simple sensor solutions
� � � �� � � �� � � � � � � � �
U S A
DES
IGNED BUILT SUPPORTED
80+
CRI
Speci�cations subject to change without notice - Rev 1019
VOL24AFA-50-AS
Features and Speci�cations:
Durable steel housing and die formed end capsE�cient LED formula impact resistant di�user, smooth exterior for easycleaning, retained by captive ends and linear channels
Construction:
Highly sensitive ultrasonic motion sensor detects motion outside direct lineof sightEasy setup with 5 minute walk test modeAdjustable sensitivity and time delay of 5, 10, 15 or 30 minutes
Sensor:
Available in 2’ and 4’ lengths (nominal)Size Options:
UL listed, ADA compliantIBEW Union made in the USA, Meets Buy America Act (ARRA)Design Lights Consortium® (DLC) quali�ed luminaire (at default low setting)
Listing & Ratings:
Suitable for wall, ceiling or stem mountingMounting Options:
Universal voltage 120-277V standardLED driver with integrated adjustments for occupied mode light levels, low,medium, high, as well as unoccupied mode light levels of 10, 20, 30 or 40%of full outputAllows for adjusting of light levels based on application for maximizing energysavings or increasing light levels for added safety or to better chargephosphorescent tape≠Optional emergency backup available
Driver:
5 years - part replacement only (see our terms & conditions page atwww.lamarled.com for details)
Warranty:
Metal core (MPCB) boards for cooler operation and longer service life areassembled in the USA with Samsung 561 LEDsL70 calculated life of >155,000 hours
LED:
Ultrasonic
re�ected wave
original wave (360˚)
Integral adjustable standby switch
Integral adjustable power switch
LED driver features
WARRANTY
YEAR
Par
ts R
epla
cem
ent Parts R
eplacem
ent5
Dimensions
LED Wattage Chart
Application Notes
Speci�cations subject to change without notice - Rev 1019
LaMar Lighting Co., Inc. 485 Smith Street, Farmingdale, NY 11735 | tel 631.777.7700 fax 631.777.7705 | www.lamarled.com
Protected by one or more US PatentsNos. 7,271,543 & 7,081,715
LaMar Lighting assumes no responsibility for misapplication of �xturesDue to the rapid advancements in LED technology, please consult our website for the most current technical data.
BEFORE INSTALLATION, PLEASE CONSULT YOUR LOCAL ORDINANCES AND BUILDING CODES FOR COMPLIANCE
For safety and compliance purposes in areas designated as emergency egress, we recommend choosing a standby light level that will provide minimum code compliant lightlevels while in the standby mode (in most municipalities, this is 1 FC average)
Occu-smart bi-level LED lighting complies with ashrae 90.1-2010 and meetsthe requirements of NYC Local Law 47
≠ 5000K color temp is recommended for use with phosphorescent tapeMany phosphorescent materials may not properly charge under LED light. It is the responsibility of the end user to determine suitability of the product for their speci�capplication - Units must be correctly adjusted to provide required minimum light levels (5000K LED units will charge most photoluminescent tape products)
Units with emergency battery are U.L. listed when equipped with speci�c optional battery back-up and meet requirements of the life safety code/NFPA101, NEC/OSHA andmost state and local codes
Wattages shown are nominal and subject to industry tolerances
VOL Gen3 Voyager series withultrasonic motion sensor
48”
24” 1.125”
3.5”
36”6”
7.8”
.875 KO
6”
4X 0.25”
4’ MODEL
3.99
2” 2”
.960 K.O.MOUSE HOLE
TYP8"
24”
7.8”
1.42”12”
5.5”
.250 Mntg Hole x2
5.5”13”
2’ Model
2’ VOYAGER 4’ VOYAGER
Full Power
Full Lumens5000K
40% DIM30% DIM20% DIM10% DIM
48W17W13W10W6W
HIGH1140 MA
14W5W5W4W3W
LOW(DLC qualified)
310 MA1495
19W7W6W5W4W
MED440 MA
206025W8W7W5W4W
HIGH571 MA
259225W10W8W6W5W
LOW(DLC qualified)
620 MA2990
36W13W11W8W5W
MED880 MA
4119 5176
Approx Lumen Multiplier5000K Shown4000K 0.973500K 0.943000K 0.92