välkommen till symetri bim forum! · –positionera om revit link med reposition to project base...
TRANSCRIPT
Pierre GullanderTechnical Sales Manager, BIM 360 Solutions
Senior Consultant, Building Systems
Välkommen till Symetri BIM Forum!
3
Autodesk® Revit ® 2017
Global parameters (2016 R2)
– Få kraften av parametriska familjer direkt i projektet med Globala
parametrar (schemaläggning, sortering och filtrering i ett projekt).
– Använd parametrarna för att driva mått och constraints. Associera med
värden i familjer för att driva dessa och rapportera mått för att använda i
formler.
4
Autodesk® Revit ® 2017
Occlusion culling (2016 R2)
– Draw visible elements only, ger förbättrad prestandan i 3D vyer.
Cancel print/export (2016 R2)
– Cancel avbryter nu alla utskrifter eller exporter på en gång.
Background processes (2016 R2)
– Talar om vilka processer kom körs i bakgrunden.
5
Autodesk® Revit ® 2017
Family Editor (2016 R2)
– I Editorn kan man se familjens utseende avseende detaljnivåer, synlighet
och view type med hjälp av Preview Visibility On.
– Filter på voids and solids.
– Autodesk har justerat på
utseendet inuti dialogerna.
6
Autodesk® Revit ® 2017
Revit links (2016 R2)
– Möjlighet att vid insättning välja Auto - Project Base Point to Project Base
Point, kan användas om inte man har samma Origin i projektet (vilket
man borde ha..)
– Positionera om Revit link med Reposition to Project Base Point och
Reposition to Internal Origin.
– Man kan nu välja For me (enskild användaren) eller For all users (alla
användare) vid Unload på en link.
8
Autodesk® Revit ® 2017
Text Notes– Ny funktionalitet och nytt utseende för att hanterar text i Revit.
– Förbättrad export av text till DWG.
– Välj om texten skall roteras med i Rotate Project North.
9
Autodesk® Revit ® 2017
Schedules– Ny funktion Combine parameters med vilken man kan kombinera ihop
flera parametrar till en egen inuti förteckningen.
– Utökade möjligheter i View Templates.
– Man kan få ut Max eller Min värde med Calculate totals.
10
Autodesk® Revit ® 2017
Tags– Använd Pin på Tag:en för att låsa den till sin plats, nu kommer linjen
att justeras när elementet flyttas.
– Beräknade värden finns nu i Tags.
11
Autodesk® Revit ® 2017
Reference Planes– Kan nu hanteras med Subcategory för att styra utseende och synlighet.
– Namn på Referance Plan kan ges direkt i vyn.
– Kan nu hanteras av Vy-filter.
12
Autodesk® Revit ® 2017
Revit Fabrication– Convert design intent to fabrication parts
– Route and Fill
– Quick Connect
– Trim/extend
– Swap fabrication parts
– Fabrication parts optimization
– Hanger bearer position
– Hanger placement
– Tag fabrication parts
– Fabrication parameters
– Fabrication family categories
– Hidden lines for fabrication parts
– Insulation and lining
– Rise drop symbols
– Tooltips for fabrication parameters in the Properties palette
– Fabrication settings
– MEP Fabrication Content for Revit
13
Autodesk® Revit ® 2017
MEP User Interface and WorkflowEnhancements– New annotation families
– Electrical settings
– Temperature Difference family parameter type
– Calculate pressure drop for taps
14
Autodesk® Revit ® 2017
MEP Performance Improvements– Duplicate marks (”Mark” parameter is not populated when placing elements)
– Volume calculations (Revit performs pipe system volume calculations as a background process)
– Display of ducts (views open and update faster, Revit regenerates ductwork only for what is visible in
the drawing area. In addition, if duct appears very small in the drawing area, it displays as simplified lines)
16
Naviate - SYMETRIs Add-in’s till Autodesk ProdukterNaviate H / Naviate E - SYMETRIs Add-in till Autodesk Revit MEP
17
Transfer Settings (2016.2 Update 1)
– Ett nytt verktyg som gör att du kan kopiera inställningar för Naviate Tools
mellan projekt, liknande Revits Transfer Project Standards.
Verktyget låter dig individuellt välja vilka sparade inställningar att överföra
från ett öppet eller länkad projekt till aktuella projektet.
18
Renumber Elements (2016.2 Update 1)
– Ett nytt verktyg som låter dig numrera element med Mark eller Number
genom att plocka dem i tur och ordning.
Välj vilken kategori att numrera, startnummer, valfritt prefix/suffix och börja
plocka delar en efter en för att numrera dem.
19
Naviate HVAC & Plumbing (2016.2 Update 1)
Sprinkler
– New Calculation engine using Newton-Raphson methods to balance pipe networks. The
calculation of complex systems are much faster and more reliable than previous version.
– Possibility to calculate using a fixed pressure to find the Flow for a design area based on a
known pressure
– Possibility to define Equal Length on individual pipes for example to support using flexible
pipes to connect to sprinklers where the equal length is known.
– Possibility to define Equal Length for fittings to use instead of EQ-length table to support
calculating using non-standard products. Equal Length can be defined both at Type or Instance
level on the fittings.
– Inner Diameter and K-factor are now displayed for pipes in UI
– Support for k-factor 140 and 150 added
– Various fixes to get more accurate static pressure loss and correct heights in the report for
specific situations
20
Naviate HVAC & Plumbing (2016.2 Update 1)
HVAC
– We have added the possibility to have parts with linear pressure loss and sound curve
diagrams.
The Systemair database are updated with a few new parts
– VST-S (Air valve - Supply)
– VEF (Air valve - Exhaust)
– CVVX (Combi grilles - Supply & Exhaust)
– Villavent wall grille (Wall grille - Supply & Exhaust)
– Villavent roof top (Roof top - Exhaust)
The Lindinvent database is updated with a few new parts:
– TTC (Ceiling diffusers - Supply)
– TTC+HK (Ceiling diffusers - Supply)
20
21
Naviate Electrical (2016.2 Update 1)
1-Line Schedule
We have made the following improvements:
– Panel Name, Mounting and Enclosure parameters are now copied from the Panel to
parameters on the Sheet to show this information in the Title Block
– The 1-Line Schedule button is displayed in the Ribbon when the view with 1-line schedule
symbols is active to allow staring the tool quicker
– Increased stability when opening projects created with non-Naviate templates
Draw Cable
We have fixed an issue with cable not drawn to the correct point of a Device in Norwegian version
21
22
Update Project– Update Project samlar alla Naviate funktioner som behöver köras för att
göra det enklare att hålla projektet uppdaterat.
Ställ in när funktionen skall köra uppdateringar, eller välj själv att uppdatera.
23
Publish– I Publish kan man nu lägga upp flera print/exporter samtidigt med Add
Print och Add Export.
– Det finns fler nya
möjligheter att välja
vyer/sheets under
What to Print
25
Summering• Nyheter i Revit
– Global Parameters
– Occlusion culling
– Cancel print/export
– Background processes
– Family Editor
– Revit links
– View range
– Underlay
– Filters dialog
– Text Notes
– Schedules
– Tags
– Reference Planes
– Revit Fabrication
– MEP User Interface and WorkflowEnhancements
– MEP Performance Improvements
• Nyheter i Naviate
– Transfer Settings
– Renumber Elements
– Sprinkler
– HVAC
– 1-Line Schedule
– Draw Cable
– Update Project
– Publish
• Mina kontaktuppgifter:
• Pierre Gullander
BIM 360: Spanning Construction Phases
Connecting Project Teams & Project Data
Via A Common Cloud Database
Construction Execution Commissioning/HandoverPre-construction
Engage the extended team with “One-
click to BIM” collaboration anywhere--
on the web and iPAD
Accelerate coordination by making it
easy for the team to continuously
resolve conflicts before the
coordination meeting
Connect the model with field data and
external business systems for more
intelligent workflows
Autodesk® BIM 360™ Glue™
Jenea Brenner, Project Engineer at Bernards, using BIM 360
Glue on the Mira Costa High School Project. Image courtesy
of Sebastian Choularton, Bernards