visio-profile mock's - mini-mock foi leading edge hem al owance - seam allowance 'z"...
TRANSCRIPT
88.17mm (3 1/2")
152.39mm.(6")
88.17mm (3 1/2")
Don Mock’s - Mini-Mock FoilLeading edge hem allowance = ½"Seam allowance = ¼"5 x profiles with holes2 x profiles without holesDimensions from plan by Peter Schmidts(http://www.schmidts-pit.de/bauplaene/mini-mock/mini-mock.pdf )
Visio drawing by Bill Wilson ([email protected])Original dimensions and Mini Mock design copyright © Don Mock
mm.(6")
1/2
12.4mm.
6.32
mm
.
1/4"
88.17mm (3 1/2")
88.17mm (3 1/2")
4'-1/8"
1222mm
5.20in.
132mm
1/2"
1/4"
1/2"
1225.50mm.
333.
80m
m.
339.
80m
m.
1/2"
Don Mock’s - Mini-Mock Foilhem allowance = ½"Seam allowance = ¼"4 x KeelDimensions from plan by Peter Schmidts(http://www.schmidts-pit.de/bauplaene/mini-mock/mini-mock.pdf )Visio drawing by Bill Wilson ([email protected])Original dimensions and Mini Mock design copyright © Don Mock
7.700mm.
5.80
mm
.
3
339
1/4"
1/2"
1/2"