villa alhambra locks presentation 11-5-2011
TRANSCRIPT
Exterior Locks – Issues• The exterior townhouse gate locks we
currently have are interior/exterior locks
• Many, if not all, of the locks are quickly rusting/corroding
• The inside of the locks are rusting also• Our current locks have accessible,
screws which corrode in the elements and present a potential security issue
Exterior Locks - History• Christian von der Goltz (Unit 103) researched
and purchased the exterior locks (at his expense) for the gates, as per his understanding with the board
• The board opted to go with other (interior/exterior) locks
• The interior/exterior locks were installed less than a year ago
• Mr. von der Goltz returned the exterior locks• The following photos were taken on
November 4, 2011
Arrow MK Series offer the designer, architect and contractor simple solutions to accessibility requirements. Their clean designs, architectural finishes and available functions make them ideal for commercial applications where heavy duty grade one hardware may not be necessary.
Original Lock Information
Lock Chassis – Cold rolled steel with zinc dichromate finish for corrosion resistance. Requires standard 2-1/8" (53.97mm) bore through door.
Original Lock Information
Latch – Brass with 1/2" (12.7mm) throw. Latch housing is steel, with zinc dichromate finish for corrosion resistance. 7/8" (22.225mm) bore in edge of door is required.
Original Lock Information
Lockset shall have no exposed screws. Chassis mounting screws may be accessed only when knob and rose are removed.
Original Lock Information
Recommendations• Replace current locks with appropriate
locks– Exterior Use– Corrosion Resistant– Non-Exposed Screws
• Consult with Mr. von der Goltz regarding the locks he researched and how to purchase them