_______1 Stanley #8 Type 13 iron jointer plane, decal on fine rosewood tote, nice knob, SW logo blade, fine overall.

_______ 2 Stanley #78 rabbet & fillister plane, complete with fence and depth stop, SW-logo blade, fine overall.

_______ 3 Stanley #8C iron jointer plane with two patent dates behind frog, Q-logo blade, entire plane coated with urethane, will make good user.

_______ 4 Stanley #79 side rabbet plane, Made in U.S.A., complete with fence, nice nickel very good overall.

_______ 5 Stanley #7 iron jointer plane Type 19, right side of tote spur broken, good tall knob, good BB-logo blade, very good overall.

_______ 6 Stanley #50 light duty plow plane that has been painted silver, with one depth stop and one blade, PAT. SEPT. 11, 83 cast into fence, very good overall.

_______ 7 Stanley #7C iron jointer plane Type 11, good rosewood tote and low knob, Q-logo blade, japanning enhanced and coated with urethane.

_______ 8 Fine Stanley #49 tongue & groove plane with great nickel plating, both blades, very good overall.

_______ 9 Stanley #6 iron fore plane with early-style rosewood tote and low knob, two patent dates in bed, Type 12 STANLEY blade, little japanning remains, a good user.

_______ 10 Stanley #40 1/2 scrub plane with nice beech tall knob and tote, SW logo blade, bottom has been slightly radiused by filing the sides’ edges, very good overall.

_______ 11 Stanley #6C iron Type 11 iron fore plane, good rosewood tote and tall knob, nice japanning, proper V-logo blade, very good overall.

_______ 12 Stanley #40 scrub plane with good BB-logo blade, scuffed but intact beech tote and tall knob, very good overall.

_______ 13 Stanley #5 1/2C wide jack plane, V-logo blade, nice rosewood tote and low knob, very good overall.

_______ 14 Stanley #71 1/2 router plane with nice knobs, one 1/4-inch blade, has been repainted silver, and has a phenolic base attached, will make great user.

_______ 15 Stanley #5 1/2 wide jack plane Type 11 good rosewood tote and low knob, good V-logo blade, small chip at cover of lever cap, very good overall.

_______ 16 Stanley #45 combination plow plane with box of 17 blades, needs cleaning, but will make great user.

_______ 17 Pair of Stanley iron jack planes; #5 Type 19 with BB-logo blade, fine tote and knob, fine overall; and a #5C exact same characteristics as the Type 19 above and in identical condition. A fine pair.

_______ 18 Millers Falls #22C iron jointer plane, complete and very good.

_______ 19 Stanley #4 1/2 wide body smooth plane, tote spur shortened and broken at base, knob cracked and coated with urethane, SW-logo blade is pitted on the face, sides have some light rust, will clean to good usable condition.

_______ 20 Stanley #4 smooth plane S casting mark, W.A. ROBBINS name in side of good tote, knob has crack up one side, good T-logo blade, very good overall; and a 4C Type 11 with good tote, tall knob cracked around base, good SW logo blade, very good overall.

_______ 21 Boxed set of five Millers Falls carving tools in wooden box with sliding lid and partial label, also comes with small sharpening stone, very good overall.

_______ 22 Scarce Stanley #2, 7-inch iron smooth plane, has patent date in recessed adjuster, nice rosewood tote and beaded knob, good lever cap, Rule & Level-logo blade, planes needs a good cleaning but will clean to at least good overall condition.

_______ 23 Two Millers Falls #14 iron jack planes; one is complete and very good; the other is later and is

also very good._______ 24 Pair of Millers Falls push drills including No. 170 with bits inside plastic handle; and an all metal

model with Millers Falls name in a band, both are very good._______ 25 Millers Falls #85 rabbet & fillister plane complete with fence and depth stop, fine overall.

_______ 26 Large Millers Falls No. 980 2-speed drill, both handles have been replaced by previous owner, good overall.

_______ 27 Millers Falls jack plane with grey bed, black knob and tote, Millers Falls logo on left side of tote, very good overall.

_______ 28 plane

_______ 29 Millers Falls #11-10 junior jack plane, has number painted in rear of bed from a high school shop class, complete and fine.

_______ 30 Rumboldt Patent butt mortise plane, complete and very good.

_______ 31 Pair of Stanley smooth planes #3 & #3C; the #3 is a Type 15, it has 302 004, likely out of a school, complete and very good; and a #3C Type 11 with good V-logo blade, good rosewood tote and low knob, very good. (These were also in the photo with all the other Stanley bench planes and in the photo with the Millers Falls stuff.)

_______ 32 Three wooden handled Millers Falls screwdrivers: two No. 676 5-inch; and one No. 676 4-inch, all are complete and fine.

_______ 33 Another Millers Falls #11-12 junior jack plane, with number 12 in paint in rear of bed, from a school shop class, complete and fine.

_______ 34 Pair of Millers Falls block planes; one has stippled lever cap and MILLERS FALLS paper tag on face of cap, gray bed, good overall; and a #206B steel block plane (similar to Stanley 118), very good overall.

_______ 35 Millers Falls 9-inch smoother, gray bed, has sticker on face of lever cap with MF logo, complete and fine.

_______ 36 Two Millers Falls block planes: #16? similar to Stanley #9 1/2, complete and very good; and a #1455B low angle similar to Stanley #56, complete and very good.

_______ 37 Two iron block planes: Sargent #106, complete and very good; Millers Falls #16 complete and very good; and a Millers Falls that is similar to Stanley #110, complete and fine.

_______ 38 Millers Falls #206 steel block plane, very good overall.

_______ 39 Pair of wooden levels including Bedortha Bros. Windsor Conn 22-inch plumb and level, both vials intact, 1903 is scratched into side near one end, very good overall; and a Henry Disston 18-inch plumb & level both vials intact, missing one of the round brass plumb vial covers, very good overall.

_______ 40 Millers Falls No. 52 Yankee-style screwdriver with two bits, complete and very good.

_______ 41 Pair of 12-inch wood levels including Keen Kutter (Henry Disston) both vials intact, coated in urethane; and a Stanley No. 104 1/2, side views have been enlarged by previous owner, both vials intact, very good overall.

_______ 42 Scarce Millers Falls #07 rabbet block plane, has removable side, similar to Stanley #140, this one is complete and fine.

_______ 43 Two Stanley levels: 30-inch No. 3 both vials intact, hang hole in one end, coated with urethane; and a #30 with all three vials intact, very good overall.

_______ 44 Pair of Keen Kutter (Disston) wood levels: K3 with both vials intact, very good overall; and a KK30 with all three vials intact and very good.

_______ 45 Unusual Keen Kutter wall hanging tool cabinet measures 27 x 18.5 x 9 when closed, has a Keen Kutter emblem on bottom of door. Box is well worn and has probably been dropped, it could

stand to be re-built. Contains a Keen Kutter panel saw and Keen Kutter claw hammer._______ 46 Two wooden levels: Winchester W0-24-in.complete and very good; and 26-inch Stanley #30

double plumb & level, all three vials intact, very good._______ 47 Handy Man DEFIANCE wooden tool chest

_______ 48 Pair of wooden levels including Keen Kutter KK3 24-inch plumb & level both vials intact, very good; and a Stanley #1X (first time we've seen this number) with V logo on top plate, very good overall.

_______ 49 Pair of Disston hand saws: No. 7 with 26 1/2-inch 7ppi blade, very good; & D8 with 9ppi crosscut blade, very good overall.

_______ 50 Pair of 26-in. wooden levels: Stanley #30 with Stanley decal on top edge, SW logo on top plate, all vials intact, very good overall, and a Bedortha Bros Windsor Conn 26-inch #3B plumb & level both vials intact, very good overall.

_______ 51 Pair of Disston hand saws: D-23 26-in. 8ppi very good; & D-8 26-inch 8ppi complete and very good.

_______ 52 Pair of 24-in Stanley wood levels: #3 with largest countersunk hang hole we've ever seen in a level; and a #0 with both vials intact, one brass plumb vial cover is MIA, very good overall.

_______ 53 Three hand saws: Atkins 26-in. 8ppi, very good; BIRKSHIRE B26S-8 8ppi, fine; and a Simons 22-inch No. 8 with 9ppi blade, all very good.

_______ 54 Pair of Disston 14-inch back saws; HENRY DISSTON NO. 77 FOR MECHANIC NOT BUTCHER REQUIRES NO SET, very good; and a late No. 4 that has handle painted red, nice blade.

_______ 55 Pair of panel saws: Disston D23 22-inch with 11ppi & Keen Kutter 22-inch with 10ppi blade, both very good. (In photo with slick, two lots of block planes, zig zag rules and more saws)

_______ 56 Pair of saws: 12-inch back saw with eagle on blade, very good; and an unknown make that would have been part of a nest of saws, very good.

_______ 57 Wooden stair saw with domed nuts, coated in clear lacquer or polyurethane.

_______ 58 Disston saw 12-in. saw sharpened on two sides, has NOV. 2, 190? date and faint keystone logo on blade, very good overall.

_______ 59 Disston or Atkins wooden stair saw, very good, has faint makers mark in arch with single line below on left side.

_______ 60 Stanley No. 992 corner brace with Fray chuck, missing the covers from the sides of the universal joint, otherwise very good.

_______ 61 Turner Gasoline Blow Torch in original blue paint with sticker having the name, fine.

_______ 62 Millers Falls HOLDALL No. 733 ratchet brace, has three patent dates on chuck shell, very good overall.

_______ 63 Three long handled scrapers: Stanley No. 82 is complete and very good; and two L.S. Starrett models one we could not get handle to tighten on, so it will require work; the other is good.

_______ 64 Lot: Ten coping saws and three rivet sets: two rivet sets by PEXTO and one marked V&B; and ten assorted coping saws, all in usable condition.

_______ 65 Turner brass blow torch No. 159, fine.

_______ 66 Lot: five push drills and one socket wrench: among the push drill are Handyman; Millers Falls No. 188A; Goodell-Pratt with Bakelite handle; and Stanley Yankee No 41; plus a SOCK-O-MATIC socket wrench.

_______ 67 Turner brass blow torch marked C&L on adjuster, very good overall.

_______ 68 Pair of adjustable bitstock washer cutters; Wm Johnson Newark NJ, very good; and an unmarked Cincinnati Tool Co. version, very good.

_______ 69 National Twist Drill & Tool bit stand

_______ 70 Manufactured Green River? wheelwright’s traveler, complete and very good.

_______ 71 General 16-oz. brass surveyors plumb bob, fine overall condition.

_______ 72 Two adjustable steel squares: Mohawk & Union, both very good.

_______ 73 Rigid 6-inch adjustable pipe wrench, very good.

_______ 74 Millers Falls 921 tack lifter, complete and fine; and a wooden handled screwdriver with 7-inch blade, fine.

_______ 75 Disston 6-inch rosewood level, very good.

_______ 76 A. STILLMAN'S 1848 Patent saw set, complete and very good.

_______ 77 Lot: Stearns clapboard gage; Stanley #88 clapboard marker; and a chain drill that is missing the chain.

_______ 78 Scarce Millers Fall No. 98 sliding bevel, complete and fine.

_______ 79 WITE (St. Louis) carriage maker’s shave, very good.

_______ 80 Lot: Large ZENITH rasp, fine; Crescent #75 1-inch chisel, very good; and a seam ripper.

_______ 81 Unknown make carriage shave with one wooden handle taped with electric tape, good overall; plus an E.C. STEARS No. 500 folding saw vise, PAT APPL'D FOR, very good.

_______ 82 Heller 18x1/4 blacksmith tong & outside caliper with locking joint, very good.

_______ 83 Lufkin 33-ft gaging tape and handle, like new in original? box bottom.

_______ 84 Stanley #194 fiberboard beveling plane, very good overall.

_______ 85 Three tool books by Dunbar; Keen; Kingshott... (first three books in bottom row of photo)

_______ 86 Two sharpening books by Lee & Geary, both complete and fine.

_______ 87 Three tool books by Petrovich; Perch & Lee; & Larsen: Custom Tools; How to Make Wooden Planes; and Tool Making for Woodworkers. All are complete and fine.

_______ 88 Five assorted tool-related books: Fine Woodworking on Planes and Chisels; The Best of Fine Woodworking Bench Tools; The Making of Tools Alexander G. Weygers; Hand Tools Their Ways and Workings by Aldren A. Watson; and Making & Using Your Own Tools & Workshop

_______ 89 Early Loggers in Minnesota Vols. II, III & IV, all filled with historic photos of hearty Minnesota loggers at work.

_______ 90 Unusual BODMAN & HUSSEY PAWTUCKET R.I. handled screw-arm plow plane with screw-operated depth stop, nice threads on screw arms, fence and arms look like boxwood, has four assorted blades by Spear & Jackson, Ohio Tool etc. This firm is listed in AWP as being in business in Pawtucket in 1872 only.

_______ 91 Five books on Marquetry including large book by Pierre Ramond

_______ 92 Ohio Tool Co. No. 99 unhandled screw-arm plow plane with screw-operated depth stop, a few minor thread chips, very good overall. Comes with six Ohio Tool blades, all very good.

_______ 93 Five woodworking books including The Toolbox Book; Treasure Chests, etc. (middle row in photo)

_______ 94 Lot of seven tool books: Grimshaw on Saws by Astragal Press; Disston Handbook on Saws 1840

to 1915 Diamond Jubilee with some cover separation beginning; an original 1953 Disston Saw, Tool and File Manual; Original 1926 Disston Saw, Tool and File Manual; etc.

_______ 95 Five woodworking books including Making Workbenches. (front or bottom row in photo)

_______ 96 Two original tool catalogs: Greenlee No. 33E (1941-1942), very good; and Stanley Tools catalog No. 61 (1935) Stanley Router, missing a small piece or two from cover.

_______ 97 Four tool books: Custom Tools for Woodworkers; Restoring, Tuning & Using Classic Woodworking Tools; Prices Realized on Rare Imprinted American Wooden Planes by Pollack; & Joseph Moxon Mechanick Exercises.

_______ 98 Three original tool books: Starrett Catalog No. 23: Sawyer Tools 1910 pocket catalog; and The Band Saw pocket book by Simonds.

_______ 99 Three tool publications: M.J. Donnelly 1993 Catalogue; Thomas' Register 1905-1906 The Buyers Guide; and a Otto Young & Co. 1892-1893 catalog reprinted by MWTCA in 1998, spine torn.

_______ 100 Stanley No. 861 oak tool chest measures 29 x 12 x 7 3/4, has folding handle on top, contains a handful of tools including #4 smooth plane; #220 block plane, Stanley 16-oz. claw hammer; Stanley 1221 hand drill and a 18-inch 10ppi panel saw with light STARDARD etch.

_______ 101 Keen Kutter (Stanley) K34 28-inch jointer plane, very good tote and knob, has hang hole thru body in front of knob, very good overall.

_______ 102 Keen Kutter 14-inch Stillson-type adjustable pipe wrench, complete and fine.

_______ 103 Keen Kutter K7C iron jointer plane, with Stanley T-logo blade, good tote and knob, very good overall.

_______ 104 Pair of Keen Kutter claw hammers: one with original handle marked F47GK has block and wedge logo on 16-oz. head, and Keen Kutter spelled out on handle, fine; and a Keen Kutter DYNAMIC with original handle, marked PAT KDRI6 on end of handle, fine.

_______ 105 Keen Kutter 15-in. wooden jack plane saw tooth logo, very good overall.

_______ 106 Keen Kutter 18-inch, No. 88 panel saw, underside of handle is chipped, etching a bit faint, very good overall.

_______ 107 Keen Kutter KK27 wide transitional jack plane, tote spur abbreviated, has Keen Kutter logo and model number stamped into top of body in front of knob, very good overall.

_______ 108 Early Keen Kutter 18-inch No. 88 panel saw with axe-head logo on medallion, and ribbon logo on etching, very good overall.

_______ 109 Keen Kutter KK5 1/2C iron fore plane, nice rosewood tote and knob, nice original blade, very good overall.

_______ 110 Unusual Keen Kutter flooring saw with DEC 12, 1905 patent in handle, light rust covers most of the blade but the bluing and etch show below and the rust comes off easily, will clean to very good.

_______ 111 Keen Kutter KK5 1/2 iron fore plane, good original iron, good rosewood tote and knob, very good overall.

_______ 112 Keen Kutter 10-in. adjustable Stillson-type pipe wrench, a few patches of light pitting, good overall.

_______ 113 Keen Kutter K5 1/2C wide body jack plane, light pitting on both sides from earlier cleaning, good original blade, nice rosewood tote and knob, very good overall.

_______ 114 Keen Kutter nickel plated saw set, complete and fine.

_______ 115 Keen Kutter K5 1/2 wide jack plane, good original blade, fine rosewood tote and knob, very good overall.

_______ 116 Reproduction? Keen Kutter pad lock with keys.

_______ 117 Keen Kutter KK5 iron jack plane, good original blade, tote broken at base and needing glue, good knob, very good overall.

_______ 118 Original Keen Kutter pad lock with E.C. Simmons cast into shackle, St. Louis U.S.A. on back of shackle, has been painted orange on one side, comes with one working key.

_______ 119 Fine Keen Kutter KK4 1/2C wide smooth plane, fine rosewood tote and knob, as good as they get.

_______ 120 Pair of Keen Kutter saws including 10-in. back saw, complete and very good; and a K48 hack saw with some pitting on frame, good overall.

_______ 121 Keen Kutter K4 1/2 heavy smooth plane, fine rosewood tote and knob, fine original blade, fine overall.

_______ 122 Keen Kutter No. 55 jointer gage, nickel plated, complete and fine.

_______ 123 Keen Kutter K4C iron smooth plane, complete and fine.

_______ 124 Lot of six Keen Kutter and Simmons files and rasps; three with LUTZ FILE & TOOL CO. handles, all very good.

_______ 125 Keen Kutter K4 smooth plane, complete and very good.

_______ 126 Disston D8 26-inch 7ppi crosscut saw, complete and very good.

_______ 127 Lot of three fixer upper hand saws: two Disston with good thumb hole handles; one has a broken blade, the other D8 just needs a cleaning, and DISSTON & SON 26-inch with split nuts and sunken medallion, pitted blade

_______ 128 Five assorted iron block planes including Stanley 60 1/2 low angle and a Sargent with improper blade.

_______ 129 Three fine Stanley zig zag rules: 108; X-227 & 1296; all are very good to fine.

_______ 130 Four assorted iron block planes including Stanley 4-Square; Stanley #65 low angle that has a repair where lever cap screw hole broke thru bottom; Early Sargent with circular logo on blade, needs cleaning; and an American Boy, very good.

_______ 131 Pair of zig zag rules including NOS DURALL & a used Millers Falls 1461.

_______ 132 Nice 3-inch slick with OHIO CITY mark, nice wooden handle, very good overall. Has what looks like OHIO CITY and CAST STEEL and there is a third line we cannot make out.

_______ 133 Disston D-8 26-inch 8ppi hand saw, very good overall.

_______ 134 Dearborn 26-inch 8ppi hand saw with nice etch that says THE BEST IS THE CHEAPEST, handle is broken at bottom and repaired with finish nail (it should be glued), and there's a crack around the top screw hole, blade is very good.

_______ 135 Disston D8 10?ppi hand saw with 10ppi blade, very nice handle, very good overall.

_______ 136 Professional File Assortment - A file for every purpose. Ten files and rasps in all, and all are like new.

_______ 137 Assortment of 16 files many new old stock Nicholson; Black Diamond, etc.

_______ 138 Three assorted coping saws including deep throat Millers Falls;

_______ 139 Millers Falls No. 88 jointer gage for iron planes, missing the original knurled nut that locks it, but has another nut in place that can be tightened with a wrench, fine overall.

_______ 140 Antique & Collectible Stanley Tools big book, by John Walter, complete and fine.

_______ 141 Stanley Tools Jan. 1941 Catalog No. 34, creased cover but very good overall.

_______ 142 Pair of original tool catalogs: Millers Falls No. 49, complete and fine; and a Greenfield Tap & Die Corp SMALL TOOLS Catalog No. 29, spine has small piece torn away at top, very good overall.

_______ 143 Stanley #193 fiberboard beveling plane, body and one attachment only, nice rosewood knob and tote.

_______ 144 Stanley #45 combination plow plane with all three main sections; long rods; three depth stops and original box containing 12 blades, 13 counting the slitter in the plane (6 of the cutters are for a #55 plane but will work in the 45), the cutter box has a legible label but the top is MIA, a very good usable plane.

_______ 145 Pair of saws including nice Disston keyhole; and another saw with two brass Warranted Superior medallions, very good.

_______ 146 Two Keen Kutter nest-of-saw blades, tatty canvas bag that has the outline of the KK logo; two C.E. Jennings saw blades for a nest of saws; and a DISSTON PAT. NOV 2, 1909 nail saw?, complete and very good.

_______ 147 Nine assorted wood auger bits in wooden box.

_______ 148 Unknown make cast iron saw vise. (in same photo as Millers Falls stuff and six mallets)

_______ 149 Three Yankee-type screwdrivers: Millers Falls No. 61A; and 610A both with tatty boxes; and a WIZARD HR1314 that is very good.

_______ 150 Boxed New Jennings Lip Auger Bits made for Hibbard, Spencer, Bartlett & Co. in Chicago, this set is missing one of the 13 original bits, the 12 that are here are very good and the label on the box is the money shot for a collector.

_______ 151 Stanley #993 corner brace, needs light cleaning, very good overall.

_______ 152 Stanley #118 unbreakable steel block plane, BB-logo blade, fine overall.

_______ 153 Pair of wooden handled T-augers including a Peck, Stowe & Wilcox patent handle; both bits have light rust.

_______ 154 Chaplin's Patent Tower & Lyon block plane with adjustable throat, good nickel on cap and on front knob, very good overall.

_______ 155 Pair of "gents" braces both with maker's marks that we cannot make out, both are very good overall.

_______ 156 Millers Falls #56B low angle block plane, very good overall.

_______ 157 Fine Millers Falls #119A 2-speed breast drill, complete with auxiliary handle.

_______ 158 Millers Falls #206 unbreakable steel block plane, covered in light surface rust, will clean to very good.

_______ 159 Three Millers Falls ratchet braces: No. 1710 10-inch; No. 1950 10-inch; and No. 1321 12-inch; all complete and fine.

_______ 160 A.H. REED Patent spiral screwdriver, Pat. DEC 12, 1882, very good.

_______ 161 PS&W ratchet brace with Lion Chuck, nice rosewood or cocobolo handles, very good overall.

_______ 162 Fray & Pigg 7-in Spofford's Patent brace, nicely marked and very good.

_______ 163 E.C. STEARNS & CO. fence or jointer gage for iron planes, complete and fine.

_______ 164 Fray #114 Spofford's patent 14-in. brace, has a carriage nut brazed or welded to frame to receive the screw, a very nice repair.

_______ 165 Millers Falls #118 2-speed breast drill with built-in level, complete with intact auxiliary handle, very good overall.

_______ 166 Stanley No. 919 8-IN-X ratchet brace, first of this one we can recall seeing and it is very good.

_______ 167 Five MWTCA catalog reprints: Fulton Tools; The National Saw Co.; Millers Falls; STANLEY TOOLS CATALOG No. 139; and Otto Young & Co. all very good or better.

_______ 168 Seven MWTCA tool catalog reprints: Winnie Machine Works; Millers Falls; Jackson & Tyler; A.J. Wilkinson & Co.; Exercises in Woodworking; Bench Work in Wood by Goss; and North Bros. Yankee Tools, all very good.

_______ 169 Tool Price Guides: Sargent Planes by David E. Heckel; and an Illustrated Value Guide to Diamond Edge

_______ 170 Two tool books: Woodworking Tools at Shelburne Museum, very good; and THE STANLEY PLANE - A History and Descriptive Inventory by Alvin Sellens, dust jack soiled and torn at edges, book itself is fine.

_______ 171 Two Astragal Press Tool books: The Handsaw Catalog Collection, very good; and The Stanley Catalog Collection, both fine to near new.

_______ 172 Three Sargent tool books: The Sargent Tool Catalog Collection by Astragal Press; Sargent Planes Identification and Value Guide by David E. Heckel; and 1911 Sargent Tool Book Reprint by MWTCA in 1995.

_______ 173 Three tool price guides: Keen Kutter Collectibles An Illustrated Price Guide 2nd Edition by Jerry & Elaine Heuring; A Price Guide to Keen Kutter Tools by L-W Book Sales; and Early 20th Century Stanley Tools A Price Guide by Jack P. Wood and printed by L-W Book Sales.

_______ 174 Stanley #8C iron jointer plane with good rosewood knob, tote is a hardwood with peeling black paint; japanning is 60 percent plus, will clean to very good usable condition.

_______ 175 Stanley #239 3/16-in. plow plane, with intact fence.

_______ 176 Stanley #7 iron jointer plane, good rosewood tote and low knob, two patent dates in bed, very good overall.

_______ 177 Stanley #278 rabbet plane complete with fence depth stop, very good overall.

_______ 178 Stanley #6C iron fore plane with early Rule & Level Co. BEDROCK lever cap, tote spur MIA, good low knob, very good overall;

_______ 179 Stanley #95 edge-trimming block plane with early arched Rule & Level Co. logo on blade, japanning 60 percent plus, early script logo on side, very good overall.

_______ 180 Stanley #5 1/2C Type 16 wide jack plane, scuffed but intact tote and knob, BB-logo blade with patent number, very good overall.

_______ 181 Early Stanly #48 tongue & groove plane with japanned body and vine cast handle, both blades intact, very good overall.

_______ 182 Prelateral Stanley #5 iron jack plane, a few scratches to otherwise nice tote, nice beaded knob. Rule & Level Co. blade, very good overall.

_______ 183 Early Stanley #49 tongue & groove plane, japanned body, patent date cast into body, nice rosewood knob, both blades intact, very good overall.

_______ 184 Fine Stanley #4 1/2 wide smooth plane with fine rosewood tote and knob, fine BB-logo blade, about as good as you're going to find.

_______ 185 Two Stanley #39 dado planes 5/8 & 1/4-in.; the 5/8 is missing the blade but is otherwise complete and very good; the 1/4-inch is complete with nickers, and depth stop and is very good overall.

_______ 186 Stanley #4 Type 19 smooth plane, fine BB-logo blade, nice tall knob and tote both coated with new finish, very good overall.

_______ 187 Early Stanley 39 3/4-inch dado plane with model number in right side of plane, complete and very good.

_______ 188 Stanley #3 iron smooth plane, very good rosewood tote and low knob, good Q-logo blade, very

good overall._______ 189 Stanley #51 chute/shoot board plane, some light pitting on top side, and on face of T-logo blade

and cap iron, will easily clean to very good overall condition_______ 190 Stanley #2 prelateral smooth plane with nice rosewood tote and beaded knob, patent in recessed

adjuster nut, good Rule & Level Co. blade, very good overall._______ 191 Stanley #248 weather strip plow plane with intact fence and depth stop, one prestop is missing,

good 3/16-inch blade, very good overall._______ 192 Stanley #182 1-inch iron rabbet plane, arched Rule & Level Co. blade, intact depth stop, very

good overall._______ 193 Winchester claw hammer and Plumb hatchet, the logo on the hammer is a bit faint, very good

overall._______ 194 Stanley #192 1-inch iron rabbet plane with SW-logo blade, intact depth stop, very good overall.

_______ 195 Lot: Millers Falls rosewood tool handle; No. 29 Yankee-type screwdriver; torpedo level; bitstock twist-drill check and little STANLEY screwdriver.

_______ 196 Stanley #190 1 1/2-in. iron rabbet plane with intact depth stop and nicker, very good SW-logo blade, very good overall.

_______ 197 Lot: NOS Atkins saw blade No. 1, 9-inch saw blade has 10tpit teeth on one side and 8tpi on other side, very good overall; offset screwdriver and an unusual wooden handled screwdriver.

_______ 198 Stanley #46 skew bladed plow with 9 blades, fine rosewood handle and wear strip, 90 percent plus nickel, intact depth stops, one nicker and screw that secures it are missing, a very good usable plane with blades.

_______ 199 Boxed Millers Falls #240 sharpening jig, the box is good and jig is fine.

_______ 200 Boxed Millers Falls butt gage

_______ 201 Massive forged claw hammer.

_______ 202 Stanley #18 T-bevel with 8-inch blade.

_______ 203 Unusual 10-inch Starrett cast iron pitch-adjusting level, used by plumbers and others when knowing specific pitch is necessary. The nut that secures the movable level vial is missing, the two level vials are full, but the plumb vials is dry. Find or make a new nut, and it will be very handy.

_______ 204 Lot: four Millers Falls tools and a Klein needle nosed plier; Millers Falls No. 199 offset screwdriver; #300 glass cutter; #212 tack lifter; and a No. 3 hand vise.

_______ 205 Unusual Keen Kutter shovel with short wooden D-handle, very good overall.

_______ 206 A. TENEYCK broad hatchet head with long axe handle, very good overall.

_______ 207 Small ARDEX camp axe with maple-leaf logo, handle says 28-inch BOYS AXE, complete and very good.

_______ 208 Millers Falls 13-oz. claw hammer with original handle, very good; and a Stanley broad hatchet that has a few nicks at cutting edge but is very good overall.

_______ 209 Newer single bit axe marked HB Made in SWEDEN, complete and fine

_______ 210 Unknown make broad-axe with crude handle, good overall.

_______ 211 Pair of Millers Falls hack saws; one patented NOV. 10, 1885, very good; and a nearly identical No. 6, very good.

_______ 212 Stanley single-bit axe with Stanley handle marked 59-205 with BB logo, fine overall.

_______ 213 Fine 3 5/8-inch GILT-EDGE adz with faint St. Paul Minn. hardware dealer's name.

_______ 214 Unknown make 24-inch cast iron shaft level sporting a new gold coat of paint, one good plumb vial and one dry, level vial is intact, good overall.

_______ 215 Unknown make 4 1/4-in. adze that has been reworked from a pitted mess and has a nice black paint job, a very good usable adze.

_______ 216 AUBURN TOOL CO. #90 handled screw-arm plow plane, a few thread chips, three non-matching blades, a very good plane overall.

_______ 217 Six assorted carving and whittling publications (top row in second photo of carving books)

_______ 218 Unknown plow plane with brass-tipped wedge-locking arms, comes with John Moseley & Son blade installed and three loose MOULSON BROS blades, all very good.

_______ 219 Lot of six books on wood carving (middle row in second photo of carving books)

_______ 220 Pair of new old stock jointers mallets: one marked CLAY SHEFFIELD; and

_______ 221 Lot of six books on woodcarving (bottom row in second photo of carving tools)

_______ 222 RARE JOHN DEERE TY3428 ratchet brace, complete and fine.

_______ 223 Millers Falls 1166 cold chisel; and a CAULAUX &C ACIER FONDU French 5/16-inch mortise chisel

_______ 224 Lot five assorted socket chisels: Three Stanley, one Defiance.

_______ 225 Stanley #45 combination plow plane in original wood box with sliding lid and partial label. Included are the following: body, sliding section, long and short rods, depth stops and beading stop, early-style cam, boxed set of 19 total blades including the two in the plane and the loose sash cutter in bottom of box, has been coated with wax, will easily clean to fine overall.

_______ 226 Two Stanley transitional jointer planes: Birmingham with unusual lateral adjuster, tote broken in two places, entire plane bleached out, can be restored to usable condition; and a Stanley "Liberty Bell" #132 that is missing the tote spur but otherwise complete and fine.

_______ 227 Stanley #171 door router plane, good handles and 5/8-inch blade, needs fence and fence rods, very good overall.

_______ 228 Stanley #32 prelateral transitional jointer plane, nice eagle logo on toe along with model number, good Q-logo blade, very good overall.

_______ 229 Alumo A1 weather stripping plane with owner added wood handle on left side, very good overall.

_______ 230 Stanley BAILEY #30 transitional jointer plane, with good STANLEY blade, very good overall.

_______ 231 Fine Stanley #67 Universal spokeshave with flat and round bottoms and the often missing fence.

_______ 232 Union No. 29 transitional fore plane, good UNION MFG blade, iron frame and lever cap repainted, very good overall; and a Stanley #29 tote spur MIA, good unmarked blade, good usable condition.

_______ 233 Stanley tack hammer, complete and fine

_______ 234 Pair of 18-inch Stanley transitional #28 planes, one is missing tote spur but is otherwise very good; the other has a stripped screw for the front knob, and is cracked and chipped at the toe, a good restoration project.

_______ 235 Three Stanley No. 61 boxwood rules; two with SW logo and one later with BB-logo, all very good.

_______ 236 Four transitional bench planes: #27 1/2 wide jack 15-inch with BAILEY name cast into tote end of frame, good Q-logo blade, very good overall; FULTON TOOL CO. with broken lever on lever

cap and needing new handle; Oak Leaf #26, wood bleached out, complete and in usable condition; and a Stanley BAILEY #26 with shattered tote, STANLEY blade, good overall.

_______ 237 Scarce Stanley #72 chamfer plane, fine early-style rosewood tote and knob, cast cap screw, japanned star screw, Rule & Level Co. arched logo, very good.

_______ 238 Stanley BAILEY #22 transitional smooth plane, brass nut has been marred by pliers, good V-logo blade, very good overall.

_______ 239 Stanley #90 steel cased rabbet plane, has 1875 patent date stamped into top of wood stuffing, sides have been opened up to allow chips to pass, very good overall.

_______ 240 Stanley #122 "Liberty Bell" smooth plane, nice STANLEY blade, large nickel plated cap screw, very good overall.

_______ 241 Pair of Stanley block planes: #18 with knuckle jointed lever cap, has small piece broken out of rear corner of left side, good usable condition; and a #140 with removable side, very good overall.

_______ 242 Stanley BAILEY No. 35 transitional smooth plane, good SW logo blade, scuffed but intact tote and knob, very good overall.

_______ 243 Stanley #65 low angle block plane, very good V-logo blade, nice nickel on lever cap and adjuster, very good overall.

_______ 244 Stanley #135 Liberty Bell smooth plane, good blade with two patent dates, tote and knob are replacements, good overall.

_______ 245 Stanley #40 scrub plane, toe spur reshaped, good V-logo blade, bottom edges have been filed to give it a slight side to side radius, good usable condition.

_______ 246 Stanley #36 wide body smooth plane, good Q-logo blade, BAILEY name cast into frame at toe, very good overall.

_______ 247 Stanley #62 low angle bench plane, little japanning remains in bed, good V-logo blade, has throat adjuster cam, several small chips in rear of throat, good rosewood tote and knob, will make a good user.

_______ 248 Stanley #37 "Jenny" wide bottom jack plane, good T-logo blade, very good overall.

_______ 249 Stanley #90 bullnose rabbet plane, PAT 8-3-97 & 3-13-00 blade, B casting, very good overall.

_______ 250 Stanley #444 dovetail plane, has light pitting, nice cutter marked 20, good overall.

_______ 251 Stanley #98 side rabbet plane, nice rosewood knob, full length blade, very good overall.

_______ 252 Pair of Stanley claw hammers: 16-oz #H111 1/2, very good and another 16-oz. marked 100 PLUS very good.

_______ 253 Pair of Stanley 3-foot 4-fold rules: #66 3/4 brass bound, very good; and a 66 1/2 (number is faint) that is in good overall condition.

_______ 254 Pair of planes including Millers Falls bullnose with some light pitting on sides, very good; and a Stanley #102, complete and very good.

_______ 255 Pair of Stanley caliper rules #36 1/2R & 136 1/2, both in near new condition.

_______ 256 Lot of four Stanley iron block planes: late USA #220; late 220A with maroon paint; #120 with SW blade; and an English 7-inch model, all are fine.

_______ 257 Stanley #12 1/2 cabinet scraper, fine rosewood handle and bottom, good SW logo blade, fine overall.

_______ 258 Stanley #82 long handled scraper, complete and very good.

_______ 259 Pair of Stanley TWO-TONE bench planes: smoother with red chipbreaker and yellow bed, very good overall; and a jack with yellow chipbreaker and maroon bed, very good.

_______ 260 Pair of Stanley rules: 63 & 136 1/2 caliper rule, both have somewhat faint markings, and are

good overall.

_______ 261 Pair of Stanley bench planes including a Handyman #H1204, complete and fine; and a Stanley G12-205 English jack plane with maroon bed and plastic adjuster nut, very good overall.

_______ 262 Ohio Tool #101 handled screw-arm plow plane with 8 iron, threads have minor chipping, will make a good user.

_______ 263 Lot of five wooden molding planes A.C. BARTLETT'S OHIO PLANES #6 round; 7/8-inch No. 90 nosing plane, complete and fine; 1/2-inch hollow, very good; #72 1/2-inch hollow; and a #6 hollow, fine.

_______ 264 Massive handled slitting gage, 15-inch beam with graduated steel slide, has 7-inch oval-shaped head, and 8 1/2-inch handle with roller in front, very nice.

_______ 265 Pair of unusual smooth planes; a modern looking one that is just under 8 inches long overall, curly maple applied sole, fine overall; and a 9-inch oak coffin-shaped smoother, very good overall.

_______ 266 Unhandled Ohio Tool Co. #99 screw-arm plow plane with total of 7 blades, minor chipping to arms, nice boxwood nuts, very good overall.

_______ 267 Ohio Tool pair No. 75, 7/8-inch T&G planes, both are fine.

_______ 268 Unusual 12-inch wooden corebox plane, looks more decorative than functional.

_______ 269 Four wooden molding planes: Sandusky #113 7/8-inch twin iron nosing, very good; Ohio Tool #37 1/2-inch side bead, stained red, good; A.C. BARTLETT'S OHIO PLANES No. 47 1/4-inch side bead, complete and fine; and a fully boxed MATHIESON & SONS 5/16-inch side bead, very good.

_______ 270 Scioto Works #62 1/2, complex profile molding plane marked 1 1/4 on heel, very good.

_______ 271 Three assorted wood planes: homemade horn plane; unusual compassed smoother (no blade); and an 8-inch unhandled gutter-type plane made from two pieces glued together in the center.

_______ 272 Six assorted Auburn Tool molding planes: No. 176, 7/8-inch dado, complete and fine; Ohio Tool No. 47, 1/4-inch dado, complete and fine; Auburn Tool Co. No. 181, 1 1/2-inch skew bladed rabbet, very good; Auburn Tool No. 70 plow (half of a tongue & groove set), marked INCH on heel, has hang hole in front, good overall; Auburn Tool No. 105, 5/16-inch side bead with owner added fence, very good; and another Auburn Tool No. 70 plow (half of a tongue & groove set), marked INCH on heel, has hang hole in front, good overall; Auburn Tool No. 105, 5/16-inch side bead, very good.

_______ 273 Ohio Tool No. 76 3/4-inch tongue & groove planes, complete and very good.

_______ 274 Four assorted molding planes: MUTTER torus bead, very good; Sandusky Tool Co. NO. 60, 3/8-inch dado complete with depth stop and nicker, has holes in side from a owner added fence, very good; Ohio Tool Co. skew bladed rabbet with applied steel sole, good; and an Ohio Tool #116 7/8-inch skew bladed rabbet, good.

_______ 275 Ohio Tool No. 131 screw-arm sash plane, complete and fine.

_______ 276 Owasco Tool No. 181, 2-inch skewed rabbet, very good; H. WILSON NEW YORK 1/2-inch round, screw holes in side from an owner added fence; S.S. BARRY N. YORK complex profile missing boxes in front of the blade, very good overall; H. CHAPIN No. 123, 2/8-inch side bead, fine; and BENSEN & CRANNELL and a 5/8-inch double boxed side bead, wedge missing 1/2 of the top, otherwise very good.

_______ 277 One looks like a bung starting mallet that someone turned into a jointers mallet; the other is a traditional jointers mallet that has powder post beetle holes covering every surface.

_______ 278 Lot of eight gouges including S.J. Addis #26; Buck Bros. 6; others by D.R. BARTON; Greenlee & Marples.

_______ 279 Lot: Stanley square/bevel; Kemper loop tool for carving spoons, etc.; and a little Millers Falls keyhole saw with iron handle, very good.

_______ 280 Nice Disston D-115 9ppi crosscut Liberty Bell handsaw, has very light surface rust good etch under the surface rust, nice rosewood handle, will clean to very good overall.

_______ 281 Two large saw Morrill Pat. saw sets, both are good.

_______ 282 Two portable saw vises one Pat. Feb. 20.'08?, both can be clamped to a bench or table top, very good overall.

_______ 283 Three lever type saws sets, the top two look like Disston.

_______ 284 Pair of mallets: CLAY Sheffield jointers, very good; and a used jointers mallet that is very good.

_______ 285 Four lever-type saw sets including Stanley No. 42W; another Stanley, plus two more, all complete and very good.

_______ 286 Lot: large homemade T-bevel, hole saw; marking gage; spokeshave blade.

_______ 287 Three saw setting tools including jointer gage and two saw sets, one in green paint.

_______ 288 Pair of iron spokeshave: Seymour Smith double shave, very good; and a Stanley #54 with Rule & Level Co. blade, very good overall.

_______ 289 Three saw sets: Morrill's; Diamond Edge, and an unmarked aluminum model.

_______ 290 Large PS&W saw vise that clamps to bench, the screw that secures it to bench is missing the flat piece on top that meets the surface being clamped to, entire vise has been repainted, very good.

_______ 291 Wheeler Madden & Clemson XLCR 28-in. crosscut saw, sunken medallion, intact nib, good overall,

_______ 292 Saw vise that clamps to work bench, the clamp has a welded repair, will make a good user.

_______ 293 Four saw sharpening tools including Dunlap jointer gage; E.C. ATKINS & CO. raker gage; and two lever-type saw sets, both complete and very good.

_______ 294 Lot of 14 assorted MTWCA Tool Catalog Reprints: Fray's: Jackson & Tyler; Henry Cheney Hammer Co; D.R. BARTON; Chapin-Stephens; Sandusky Tool Co; Millers Falls 1887; Greenfield Tool; Auburn Tool Co; Belcher Bros.; Stanley Combination Planes; Lufkin Rule; another Lufkin Measuring Tapes & Rules; and Buff & Burger Engineers' and Surveyors' Instruments.

_______ 295 Four reprinted tool pamphlets and books: Steel Carpenters' Squares by Eagle Square Co.; Winchester Pocket Catalog of Tools 1924; The Level You Need Made by S. Robert Jackson (Successor to Davis & Cook); and an original Directions for Fitting Narrow Band and Small Circular Saws by E.C. Atkins.

_______ 296 Lot of four tool books: Original Lufkin Tools Catalog No. 6 with insert; Starrett No. 13 Catalogue and Price List of Fine Mechanical tools; Norris Metal Planes reprinted by Tom Witte in 1991; & Primitives Our American Heritage by Kathryn M. McNerney.

_______ 297 Pair of iron spokeshaves: Stanley #151 complete and very good; plus an early #60 double shave with Rule & Level Co. blades, very good.

_______ 298 Three iron bench planes including sawed-off #8 that is now 19 7/8 long, good Q-logo blade, very good; Stanley DEFIANCE 14-inch iron jack plane, very good overall; Shelton #05, complete

_______ 299 Three iron smooth planes: Two DEFIANCE 9-inch smoothers, both very good; and a Shelton #04 complete and very good.

_______ 300 Millers Falls #67 router plane, complete with all three blades and throat closing attachment, fine overall in an owner-made wooden box.

_______ 301 Long handled adz, head painted black, very good overall.

_______ 302 Four wooden bench planes: two jacks by New York Tool Co. & SCIOTO WORKS; and two smoothers including a handled model by NEW YORK TOOL and a coffin-shaped smoother marked D FAY 04 on the toe that has had a crossbar installed, all are good or better usable planes.

_______ 303 Medium sized camp axe in red paint, not marked but likely not very old.

_______ 304 DIETZGEN medium sized 10-oz. brass plumb bob in leather sheath that can be worn on a belt.

_______ 305 Winchester single bit axe, head has a partial black paint job, very good handle.

_______ 306 C.S. Osborne saddler's knife, rosewood handle and brass ferrule

_______ 307 Stanley #36 6-inch cast iron plumb & level, complete and very good.

_______ 308 Pair smooth planes: Stanley "Liberty Bell" No. 122 that is complete and very good; and a Gage Tool Co. No. 4 that has a crack on one side from toe thru to the throat, and the metal plate on top the tote is loose due to chunk of spur being broken out. Good for parts or restoration.

_______ 309 Stanley #37 cast iron 6-inch double plumb & level with Eclipse vial covers, all three vials intact, very good overall.

_______ 310 New ROCKLER Odd Jobs Layout Tool in original box with rule, scribe, complete and fine.

_______ 311 J. STUDEBAKER Minneapolis gaging stick, measures just over 17 inches, complete and very good

_______ 312 Three different Millers Falls steel plumb bobs

_______ 313 Four Stanley 4-fold rules including unmarked #68; Stanley #68; late model Stanley #27; and a nice brass bound Stanley #84, all very good.

_______ 314 Unmarked Starrett-type plumb bob, good overall.

_______ 315 Two Stanley caliper rules: #136 & #36 1/2R, both are complete and fine.

_______ 316 Stanley #5 iron jack plane, tote spur MIA, good

_______ 317 Stanley #8 iron jointer, tote spur MIA, good low knob, STANLEY blade, will make good user.

_______ 318 Winchester coping saw, light pitting on frame, good legible logo.

_______ 319 Early Keen Kutter KK78 rabbet & fillister plane, complete with fence and depth stop, nickel plated cap screw, complete and fine.

_______ 320 Winchester 3035C iron jointer plane (Same size as #7 Stanley) good tote and knob, good original blade, very good overall.

_______ 321 Keen Kutter JUNIOR razor hone in tin box

_______ 322 Gage No. 7 iron jointer plane, nice rosewood tote and tall knob, very good overall.

_______ 323 Winchester 3501 coping saw frame, needs a blade, very good.

_______ 324 Winchester #3015 iron fore plane, may be a repaint, tote and knob refinished, very good overall.

_______ 325 Two Winchester tools, nail set and center punch; the center punch is a 2773 and 3/32 it is very good; Nail set has no part number but has good Winchester logo.

_______ 326 Winchester 3015 iron fore plane, paint on sides of tote, proper cutter and lever cap, 50 percent japanning.

_______ 327 Winchester 3533 10-inch ratchet brace, needs a chuck sprint to spread jaws, very good overall.

_______ 328 Stanley BEDROCK 605 1/2 jack plane RT, good early-style tote and nice knob, Q-logo blade, very good overall.

_______ 329 Winchester SPECIAL hatchet head, very good.

_______ 330 Pair of 8-inch smooth planes: early Sargent #408 with early circular logo on cutter, fine tote and beaded knob, bed is cracked on side from top 2/3 of the way down to the throat, good for parts or to weld; and a WARDS MASTER (Stanley) #3 complete and fine.

_______ 331 Winchester 3523 10-inch ratchet brace, complete and very good.

_______ 332 Nice Tower & Lyons Chaplin's Pat. #3 smooth plane with nice wooden knob, and nice Bakelite? tote, very good overall.

_______ 333 Scarce Keen Kutter K180 2-fold boxwood rule, indexing pinhole on edge is hollowed out, very good overall.

_______ 334 Scarce Sargent #407C smooth plane, early circular logo on blade, good tote and knob, very good overall.

_______ 335 Keen Kutter K840 boxwood 4-fold, brass 1/2 bound rule, complete and fine.

_______ 336 Union X5A wide iron jack plane, "poor man's vertical post" fore plane, tote spur MIA, good knob, very good overall.

_______ 337 Lot of four Winchester screwdrivers: 7101-2-inch; WINCHESTER SPECIAL 4-inch; Winchester 7124 5-inch; and a Winchester 7106? 8-inch with badly worn logo and badly worn wood handle, the other three are very good.

_______ 338 FULTON (Sargent) 18-inch corrugated iron fore plane, fine tote and beaded knob, fine overall.

_______ 339 Winchester 1596 5/8-inch cold chisel, good overall.

_______ 340 Unusual Stanley A6 aluminum fore plane, Q-logo blade, tote broken in center and spur MIA, good tall knob, traces of nickel on lever cap, very good overall.

_______ 341 Winchester 1522 S wrench, very good; and unknown pair of 8-inch gas pliers.

_______ 342 Winchester (Stanley) W103 block plane, original blade, nice japanning, fine overall.

_______ 343 Millers Falls #22 iron jointer plane, good japanning, nice tall knob, tote missing chunk from base, nice blade, very good overall.

_______ 344 Winchester #1032 10-in. adjustable pipe wrench, complete and very good.

_______ 345 Brass Winchester store sign 6 3/4 x 3 says "We Recommend and Sell WINCHESTER Cartridges and Guns" very good overall.

_______ 346 Keen Kutter K680 boxwood 4-fold rule, some indexing pins missing, very good overall.

_______ 347 Winchester W33 double open ended wrench, very good.

_______ 348 Keen Kutter K620 4-fold brass-bound rule, complete and fine

_______ 349 Winchester W29 double open ended wrench, very good overall.

_______ 350 Keen Kutter K610 4-fold boxwood rule, has edge chip and missing indexing pins, very good overall.

_______ 351 Stanley #33 transitional jointer plane, good tote and knob, good Q-logo blade, very good overall.

_______ 352 Stanley #36, 24-inch cast iron double plumb & level, both vials intact, very good overall.

_______ 353 Prelateral Stanley #30 transitional jointer plane, good Rule & Level Co. blade, tote spur MIA, good beaded knob, patent dates in recessed adjuster nut, very good overall.

_______ 354 Stanley #370, 24-inch cast iron double plumb & level, all three vials have Eclipse covers and are intact, fine overall.

_______ 355 Stanley #129 Liberty Bell 20-inch fore plane, STANLEY iron with APL 19, 92 patent date, tote spur MIA, good knob, very good overall.

_______ 356 Pair of wooden levels including Marshall Wells 18-inch No. 118NK Northern King, both vials intact, very good; and a 10-inch Stanley #102 intact vial very good.

_______ 357 Pair of transitional jack planes: Sargent #3414, complete, needs light cleaning, very good overall; and a Stanley #27 with steel sole plate added, early-style tote is broken and needing to be glued; good low knob, will clean to very good.

_______ 358 Pair of Stanley #104 wooden levels, 12 and 14-inch, the 14-inch has partial decal on top; both complete and very good.

_______ 359 Stanley #36 prelateral smooth plane, good Rule & Level arched logo blade, nice early-style tote and beaded knob, patent date in recessed adjuster nut, very good overall.

_______ 360 Three Stanley wood levels: 18-inch No. 00, complete and fine; 14-inch No. 104 complete and fine; and an unknown model that has been sanded, owners tag says it is a No. 0, over cleaned.

_______ 361 Lot of three handled transitional smooth planes: Stanley #35 that has a whole new wooden sole attached with a throat patch, Stanley blade, good overall; Stanley #35 prelateral smoother with nice early style tote good beaded knob, arched RULE & LEVEL CO. blade,, patent dates in recessed adjuster nut, very good; and a #35 that is missing the blade, tote broken and glued, good knob, with blade will be in usable condition.

_______ 362 Three wooden levels: 18-inch Disston plumb & level with both vials intact, complete and very good; 18-inch Keen Kutter No. KK104 has one edge chip, both vials intact, very good overall; and a KK104 16-inch that is complete and fine.

_______ 363 Stanley #24 Type 9A transitional smooth plane, good Q-logo blade, nice knob, 70 percent japanning, good overall.

_______ 364 Stanley 18-inch No. 37 cast iron plumb & level, with Eclipse vial covers over all three intact vials; good nickel, very good overall.

_______ 365 Pair of Stanley transitional smooth planes: "Liberty Bell" No. 122, entire plane has been polyurinated; and a prelateral #22 smoother, arched Rule & Level Co. Blade, chipped at base of knob, eagle logo on toe, good overall.

_______ 366 Stanley 24-inch No. 237 aluminum level with three Eclipse vial covers all vials intact, very good overall.

_______ 367 Stanley #78 1/2 brass-bound 4-fold rule with double arched joints, one small edge ding, very good overall. (we jumped to here from lot 316)

_______ 368 Pair of Stanley #104 wood levels 14 & 16-inch, one dry plumb vial in the 16-inch model otherwise very good; the 14 is complete and very good.

_______ 369 Pair of Stanley #26 rosewood handled bevels: 8-inch and 6-inch, both complete and fine.

_______ 370 Nice handled 16-inch badger plane,

_______ 371 Stanley #21 adjustable square with 6-in. blade, very good overall.

_______ 372 Stanley #546 tape measure, has former owner’s initials lightly scratched above the Stanley name.

_______ 373 Three Zig Zag rules: Defiance 1296F; VICTOR 856; and German? QUALITATSMASSTAB English and Metric; all three are near new.

_______ 374 Pair of wooden bench planes: 19-inch that has been sawed down on both ends, very good overall; and a 22-inch OGONTZ jointer, good overall.

_______ 375 Pair of Stanley levels including 39 1/2 machinist level that is nickel plated and very good; and a #264 torpedo with shaft groove, very good.

_______ 376 Stanley #98 double beam marking gage, early script logo, very good overall.

_______ 377 Three tool books: The Tool Box Book by Jim Tolpin; Working With Wood by Peter Korn; Planecraft by John Sainsbury, all very good.

_______ 378 Lot of three books: Old Ways of Working Wood by Alex W. Bealer; Country Furniture With Over 300 Beautiful Pencil Sketches by Aldren A. Watson; and The Complete Woodworker by Bernard E. Jones.

_______ 379 Two tool books: Country Woodcraft Drew Langsner; and The Victorian Catalogue of Tools For Trades and Crafts by Phillip Walker, both very good.

_______ 380 Three woodworking books: Building Chairs by Time Life; Tables And Desks by Time Life; and The Garrett Wade book of Woodworking Tools by Garry Chinn and John Sainsbury.

_______ 381 Books: The Encyclopedia of Wood Working by Consultant Editor Mark Ramuz; and Traditional Woodworking Hand Tools by Graham Blackburn, both fine.

_______ 382 Three woodworking books: The Workshop Companion Joining Wood by Nick Engler; The Workshop Companion by Nick Engler; and Sculpting Wood contemporary tools and techniques by Mark Lindquist.

_______ 383 TOOLS Making Things Around the World book by Hubert COMTE, complete and fine.

_______ 384 Pair of tool books: The Legend of Stanley by Jeffrey L. Rodengen, fine; and How To Use and Care For Woodworking Tools by Alan & Gill Bridgewater, fine.

_______ 385 Two tool books: Encyclopedia of Antique Tools & Machinery by C.H. Wendel; and The Forgotten Arts & Crafts Skills Bygone Days by John Seymour, very good.

_______ 386 Three Tool Books: Choosing & Using Hand Tools by Andy Rae; Woodworker's Hand Tools by Rick Peters; and Shop-Tested Woodworking Tools You Can Make by the Editors of Wood Magazine.

_______ 387 Three books from Colonial Williamsburg: The Leatherworker in Eighteenth-Century Williamsburg; The Silversmith in Eighteenth-Century Williamsburg; and The Blacksmith in Eighteenth-Century Williamsburg, all very good.

_______ 388 Three Blacksmith books: The Modern Blacksmith by Alexander G. Weygers; The Complete Modern Blacksmith by Alexander G. Weygers; and Practical Project for the Blacksmith by Ted Tucker, all very good.

_______ 389 Three more blacksmith books: Elementary Forge Practice by John Lord Bacon; Blacksmith Shop & Iron Forging reprinted from a 1906 original; and Building a Gas Fired Crucible Furnace by David J. Gingery.

_______ 390 New old stock shingle froe, never used.

_______ 391 Lot: wooden coachmaker’s router, two crowbars; one with advertising JOHNSON'S MACHINE SHOP LUND WISC.; and an EXACT LEVEL & TOOL WORKS torpedo level.

_______ 392 Eight misc. bitstock tools; three auger bits, plug cutter, square nut driver; and a Stanley flat-bladed screwdriver bit, all very good.

_______ 393 Stanley #38 1/2 4-inch machinist level, has SW logo on brass top plate, some light pitting on bottom, most japanning gone from sides, good overall.

_______ 394 Stanley #31 3-inch nickel plated pocket level, complete and fine.

_______ 395 Lot: Eifel Geared Plierench very good overall;

_______ 396 Pair of tape measures: Defiance by Stanley #1260; and an unknown make with leather holder, has green oxidation? that comes off with your fingernail, very good overall.

_______ 397 Lot: Stanley Handyman 1/2-in. 16-208 chisel; ENDERES E9 1 1/4-inch chisel; tiny push drill MADE IN USA; WARDS push drill; and two razor knives: Stanley No. 299; and DEFIANCE 1299 in red paint.

_______ 398 Lot: screwdrivers, saw, saw jointer IOB; file handle; two Stanley No. 137 countersinks; two of the screwdrivers came with a Stanley #45 or #55; cast iron file handle; Imperial tubing cutter; Stanley #117 awl; another awl with two patent dates: July 6, 1800 and Nov. 27, 1884; The New Maple Leaf Web Saw Jointer IOB, etc. A total of 23 items.

_______ 399 Stanley #8 iron jointer plane, Type 6A, fine tote and knob, very good Q-logo blade, very good overall.

_______ 400 Stanley #2 iron smooth plane, fine Q-logo blade, nice tote and knob, fine overall. (in same photo as lot 398)

_______ 401 Craftsman (Millers Falls) rabbet & fillister plane that is similar to a Stanley #78, complete with fence and depth stop, very good overall.

_______ 402 Stanley BEDROCK 608 RT jointer plane, nice early rosewood tote and low knob, 3-line BEDROCK lever cap, 50 percent plus japanning, very good overall.

_______ 403 Early Stanley #113 compass plane, the rear handle is missing, but it was removed and not broken off, so a new one could be installed, can be cleaned to very good overall.

_______ 404 Fine Stanley BEDROCK #607 jointer plane, STANLEY lever cap with orange background, fine tote and knob, fine overall.

_______ 405 Stanley #6 cast iron fore plane, nice rosewood tote and knob, nice BB-logo blade, small band of light pitting along both sides at the very bottom and there is fine pitting on the bottom, a nice usable plane.

_______ 406 Stanley #45 Type I combination plow plane, all four screws are unslotted and fine; comes with one plow blade and two depth stops, one of the nicest Type I planes we have seen.

_______ 407 Pair of Stanley bench planes; #4 & #5; the number 5 is a Type 18 that is complete and very good; the #4 is a Type 20 that is complete with nice hardwood tote and knob, has small hang hole in front of the knob, very good overall.

_______ 408 Fine Stanley #46 skew bladed plow plane, a later model plane with fine nickel, fine rosewood, and a full set of 13 blades with the two in the plane. If you've waited to buy one, your wait is over, they just don't come any better.

_______ 409 Unknown USA plane w/ Sorby toothing blade, very good blade in a so-so plane.

_______ 410 Early japanned Stanley #66 hand beader with 9 blades including one blank and the router blade that has the SW logo, comes in a worn box bottom that may be an original box.

_______ 411 Stanley #62 low angle bench plane, tote broken and glued, good SW-logo blade, chip in rear of throat, intact throat-adjusting cam, nice nickel on lever cap, very good overall.

_______ 412 Early Stanley #13 prelateral compass plane, early arched Rule & Level Co. blade, screws holding flexible sole to body, less than 50 percent japanning, patent dates inside recessed nut, very good overall.

_______ 413 Shelton No. 04 smoother and Stanley #78 planes; the Shelton is complete and very good; and #79 is missing the fence and depth stop, but has a good SW-logo blade and is in good usable condition.

_______ 414 Union #411 compass plane, with UNION CO. blade, some light rust, complete and will clean to very good overall.

_______ 415 Millers Falls #5 ratcheting auger handle, can be used as a T-auger or one handle can be removed for tight quarters, fine overall.

_______ 416 Four assorted bench planes including CAPEWELL 9-inch smoother, very good; Stanley H1203 and H1204 both complete and fine; and a Stanley Handyman H104 that is complete and very good.

_______ 417 Two Stanley Type 17 WWII era bench planes: both planes have the hard rubber adjuster nuts; the #5 has worn but proper hardwood tote and tall knob; the #4 has a broken rosewood tote and hardwood knob.

_______ 418 Stanley #8 BEDROCK Type 1, wrong lever cap, the entire plane has been sprayed with lacquer

or something similar, has the milled off patent date in rear of bed. These early Bedrock planes had yet to get the 3-digit model number.

_______ 419 Stanley #3 & #4 iron smooth planes; both are complete and very good.

_______ 420 Stanley #4 1/2 wide body smooth plane, has patent number on back of lever cap, fine BB-logo blade, very good overall.

_______ 421 Stanley #5 1/4 junior jack plane, WWII model with hard rubber adjuster nut, tote broken and glued, very good overall.

_______ 422 Pair of Stanley jack planes: #5 & #5 1/2; the #5 is complete and fine with BB-logo blade; and the 5 1/2 has been repainted, has good SW-logo blade, fine rosewood tote and tall knob, very good overall.

_______ 423 Stanley #6C Type 11 fore plane, good T-logo blade, japanning has likely been enhanced, very good overall.

_______ 424 Stanley #7 iron joiner plane, fine rosewood tote and knob, very good Q-logo blade, fine overall.

_______ 425 Box lot eight Stanley chisels all very good.

_______ 426 Stanley #60 chisel set in original plastic roll, all are near new.

_______ 427 Four new old stock Rockler turning tools: Carbide Turning Tool; Square Cutter; and Diamond Cutter. All these were purchased and never used.

_______ 428 HUGE lot of Keen Kutter chisels & gouges, some needing handles, most are very good.

_______ 429 Six new old stock turning tools; five Sorby; 3/16 fluted parting tool; 1 1/4-inch roughing gouge; 1-inch oval skew; 1/2-inch fingernail spindle gouge; and 1/2-inch bowl gouge, all new in original packaging; plus a Crown Tool bowl gouges also new in original packaging.

_______ 430 Tool Shop 5 Piece Wood Lathe Chisel Set, new in original packaging, "GUARANTEED FOREVER."

_______ 431 Set of five new old stock turning tools in a cloth pouch. Some dust from laying in a shop where they never got used.

_______ 432 Six carving tools including Taylor Sheffield #18 & #16, all very good or better.

_______ 433 SANDVIK HUNTER 421-2 camp axe, like new.

_______ 434 Stanley #36 18-inch double plumb & level with shaft groove, one of the plumb vials has an Eclipse cover, all vials intact, very good.

_______ 435 Stanley #193 fiberboard beveling plane with eight attachments, box of blades, and set of rods, all in very good overall condition.

_______ 436 Pair of Stanley back saws: No. 4 12-in., complete and very good; and a #1514 14-inch with 13 ppi blade, very good.

_______ 437 Like new 2-handed scorp, W. Germany, fine overall.

_______ 438 Stanley #386 jointer gage or fence, has V-logo on bracket, has about 60 percent nickel, will need to be cleaned, very good overall.

_______ 439 Pair of fiberboard beveling planes: Stanley #194 complete and very good; and a BEVIL-DEVIL from the KIMBALL MFG CO. ROYAL OAK, MICH.

_______ 440 Pair of Millers Falls Yankee screwdrivers: #61 in a tatty box with no bits, the screwdriver itself is very good with most of the original decal; and a #67A with two flat bits, in tatty box that has some runs in the color from moisture, the screwdriver is fine with original decal.

_______ 441 Millers Falls No. 713 13-oz. claw hammer, very good; and a Millers Falls torpedo level, fine.

_______ 442 Millers Falls #85 rabbet plane, complete with fence and depth stop in an owner-made wooden

box, fine.

_______ 443 Small Millers Falls single-speed breast drill, the wooden crank handle cracked and whoever repaired it glued it and stuck it right back on and it is frozen to the shaft. A semi-scarce drill in good overall condition.

_______ 444 Pair of Millers Falls hand drills: the top one is marked CRAFTSMAN on the crank arm, but it was made by Millers Falls, the handle has storage for bits inside, no bits included; and a Millers Falls No. 77 that has light rust on the crank and a chuck that needs new springs, good overall.

_______ 445 WINCHESTER claw hammer, very good overall.

_______ 446 Medium sized dowel pointer, very good.

_______ 447 Nice lignum vitae carving mallet, very good.

_______ 448 Pair of Millers Falls hand drills: #77A complete and very good; and #303 that has a loose main handle, but it otherwise very good.

_______ 449 Homemade wooden scraper, good overall.

_______ 450 Scarce Millers Falls No. 430 Yankee screwdriver with egg-shaped handle, will need some light oil to get it working properly, very good.

_______ 451 Stearns iron jointer gage or fence for iron planes, needs light clearing, very good overall.

_______ 452 Pair Stanley long handled scrapers #82 & #70; the #70 is like new with BB-logo blade; the #82 needs a blade but is otherwise very good.

_______ 453 Millers Falls #77 router with 2 blades; a V-shaped blade and a 1/4-inch, the plane has 90 percent plus japanning, and is very good.

_______ 454 Pair of Keen Kutter claw hammers, one with PAT APLD FOR on butt end of handle; the other has a nickel plated head and a hole drilled in end of handle;

_______ 455 Three wooden planes: toothing, smooth, etc.

_______ 456 New Stanley No. 62 low angle jack plane, this is a late model low-angle bench plane that can still be bought online, this one is new and never used, the box is like new too.

_______ 457 Six wooden molding planes: complex; side bead, hollow, round...

_______ 458 This is another new old stock plane. It is a Veritas D5P36-50 bevel up smooth plane that was purchased in the past few years, put away, and never used. A new plane in near new box.

_______ 459 Pair of wooden planes: Ogontz No. 3 smoother with Sandusky blade, very good; and a complex molder that is just under 8 inches long, looks Continental.

_______ 460 Lot of seven assorted wooden molding planes: D. BENSON ALBANY complex; Union Factory 3/4-inch side bead; Ohio dado, etc.

_______ 461 Wood router with applied brass sole, nicely executed, very good overall.

_______ 462 Pair Greenlee auger bit extensions: one 18-inch and one 24-inch, both fine. Patent No. 1758069.

_______ 463 Four assorted wood planes: compassed hollow; handled JOHN MOSELEY & SON LONDON smoother with applied brass sole plate, very good; a rough smoother with throat repair; and a horn type scrub plane that never had a horn, very good.

_______ 464 Pair of Yankee braces 2101 8-inch & 2101A, one has a few paint splatters; both are very good.

_______ 465 Six wooden molding planes: Ohio 62 1/4, very good; 3/16 & 1/2-inch side beads; Auburn 176 1/2-inch dado....

_______ 466 Record M444/S4 bevel edge chisels, in original packaging, very good.

_______ 467 Stanley #15-T40 dovetail saw with 10-in. blade, very good overall.

_______ 468 Lot seven assorted STANLEY chisels, one needing a handle, all very good.

_______ 469 Pair mortising chisels: PEUGEOT FRERES 5/8-inch, very good; & MOULSON BROS. 5/16-inch that has a clunky iron ferrule, and is very good overall.

_______ 470 Henry Disston & Sons 10-inch No. 68 dovetail saw, very good overall.

_______ 471 Pair of tang gouges: Sorby 1 1/2-inch with some light pitting; and a Newbould 1 1/8-inch very good.

_______ 472 Lot of seven Stanley chisels with plastic handles: three #60s; 16-204, 16-208, 16-212; and 16-216, all very good.

_______ 473 POWEL 3 1/4-inch slick blade, needs handle, some pitting.

_______ 474 Freud GS006 6-inch 15ppi Gent's Saw, fine to near new condition.

_______ 475 Lot: seven BUCK carving tools: #4; #20; #30; #5; #15; #24; #20; and a skewed chisel.

_______ 476 Greenlee 1 7/8-inch slick blade, needs handle

_______ 477 Heavy Spear & Jackson 2-inch gouge with long handle, very good.

_______ 478 Seven Buck Bros. gouges; six tang that all have handles and one socket gouge that needs a handle.

_______ 479 Four Buck socket chisels, all very good; plus a D.R. Barton socket gouge that is very good.

_______ 480 Seven cranked Buck Bros. chisels & gouges: two chisels and five gouges, all fine.

_______ 481 Four Buck Bros. chisels including #400 3/8-inch in original box, the others are very good.

_______ 482 Set of six new old stock AMT turning tools; 3 each into two different wooden boxes.

_______ 483 Three old gouges with crude handles

_______ 484 Veritas turner's sizer, fine overall.

_______ 485 Six new old stock turning gouges; three by Crown; three by Taylor.

_______ 486 Four push drills: Yankee No. 45; Yankee Handyman with gray handle; Yankee Handyman with red handle; and Yankee Handyman with red cap and blue handle.

_______ 487 Box of 10 assorted bitstock tools incl. 8 Keen Kutter auger bits.

_______ 488 Fine Stanley #18 block plane with knuckle cap, SW logo and fine plating on lever cap, fine SW blade, fine overall.

_______ 489 Early Stanley prelateral No. 35 plane, complete and very good.

_______ 490 Keen Kutter pocket knife with tropical handles (rosewood?), very good overall.

_______ 491 Unusual Winchester saw set, first we have seen, some rust and light pitting.

_______ 492 Six Winchester screwdrivers: 7115-6-in.; 7114-5-in., most very good overall.

_______ 493 Huge bag full of carpenter pencils.

_______ 494 Fine Stanley #45 combination plow plane, script logo on skate, both sets rods, cam and beading stop, two depth stops, two boxes of blades, and one pair of hollow and round bottoms with

blades. A fine plane in fine plane in the original box top with partial label._______ 495 Iconic May 1940 FORTUNE Magazine with tool themed cover by S.W. CRANE, complete and

very good._______ 496 Three padlocks: STRONG LEVER; FAVORITE 6 LEVER; and YALE. The Strong Lever does

not have a key, but the other two do. (lot on lower left in photo)_______ 497 Pair of Japanese saws 240mm & 300mm, both have Grizzly store tags on handle, both are very

good, but have some black carbon from sitting in a dirty shop. (Pair on back left)_______ 498 Six brass padlocks: AMERICAN U.S.; YALE; YALE ORD. DEPT; SIMMONS (no key);

SQUIRE; Unknown and unmarked. Five with keys are working._______ 499 Three Japanese back saws: two traditional JAPANESE WORKER brand; and one reversible

flushing or cutoff saw marked JAPAN._______ 500 FINE Stanley #55 combination plow plane in original tall pasteboard box, with all four boxes of

blades, as fine a #55 as we have seen in a very good box._______ 501 Three brass padlocks all with keys: CHAMPION 6 LEVER PAT PEND; ADMIRALTY USA

Lock No. 004-2-1; U.S. CORBIN; all very good and working._______ 502 Pair of Japanese saws both like new: one is 240mm, the other 285mm, both like new with

original store wrapping and tags._______ 503 Lot: Two Stanley rafter layout squares: #125 with both level vials intact and scribe is present too,

very good; and a Stanley #46-050 aluminum try square and bevel; and OVB long handled scraper, needs a blade.

_______ 504 Two Stanley squares: No. 21 adj. square with 9-inch blade, good; & #20 try square with 8-inch blade, fine.

_______ 505 Two sliding bevels: Stanley 8-in. with light to moderate pitting on blade; & a Hibbard True Value 8-inch rosewood handled bevel, fine.

_______ 506 Two marking gages: Stanley #62 SW, very good; and an unknown make marking and mortise gage with rosewood beam and head, and brass wear strips and screw, very good overall.

_______ 507 Lot: Two pair dividers and an outside caliper.

_______ 508 Two Stanley try squares: #1 8-in. & #12 8-in. both very good overall.

_______ 509 Stanley #36 12-inch cast iron plumb & level with shaft groove in bottom rail, all three vials intact, good japanning, fine overall.

_______ 510 Lot: Two adjustable squares; one a Stanley #122 complete and fine; and a Stanley 122 1/2A with plastic screw and plastic head on the scribe, very good; a large NICHOLSON rasp and Nicholson vixon? file.

_______ 511 Stanley #45-912 square NOS; and clapboard marker.

_______ 512 Pair of clapboard markers: Stanley & Stearns, both very good.

_______ 513 Lot: Stanley #122A adj. square; #210 2 5/8-in chisel; and two 4 1/2-inch rosewood handled try squares, both very good.

_______ 514 Pair of early Stanley squares: Stanley #10 Type 2 with 6-inch blade, very good; and a miter square with 10-inch blade having a wood-stuffed handle, very good.

_______ 515 Pair of Stanley layout tools: #18 T-Bevil with Sargent's Pat date in blade, and having an 8-inch blade, very good; and a miter square with 8-inch blade, very good.

_______ 516 Pair of Stanley layout tools: #18 T-Bevil with Sargent's Pat date in blade, and having an 8-inch blade, very good; and a try square with 8-inch blade, very good,

_______ 517 Pair of Stanley planes: Early #113 that has had the rear handle broken off. It is otherwise OK and can be used as is or stripped for parts; plus an early #46 skew bladed plow that has the early fence with auxiliary bottom, has the early unslotted screws, fine rosewood handle and beaded

knob, no provision for a slitter or rear depth stop, one blade included._______ 518 Stanley #8C iron jointer plane, Type 11, nice T-logo blade, fine rosewood tote and knob, very

good overall._______ 519 Nice PLUMB AUTOGRAPH single bit axe, complete and very good overall.

_______ 520 Pair of Stanley bench planes: Stanley #7 iron fore plane is complete and very good; and a #5 1/2 Type 11 that has hang hole in rear of bed, tote broken and glued, good low knob, very good overall.

_______ 521 Stanley 48-in. inside measuring stick, complete and very good.

_______ 522 Stanley #5C iron jack plane Type 10? has two patent dates in bed, no frog adjuster, Q-logo blade, nice early-style rosewood tote and knob, very good overall.

_______ 523 Scarce Keen Kutter lipped shipwright's adz, very good overall.

_______ 524 Stanley #4 1/2C Type 9 or 10, has two patent dates in bed, good Q-logo blade, nice glue repair to early-style rosewood early-style tote, fine knob, very good overall.

_______ 525 Pair Stanley iron block planes including No. 63 low angle with nice nickel plated cap, good knob, nice V-logo blade, has a crack in right side about 1/2 inch behind throat that goes 2/3 of the way from top toward the bottom, good overall; and a #103, with Rule & Level logo blade, very good overall.

_______ 526 Stanley #4 Type 11 smooth plane, fine rosewood tote and knob, fine T-logo blade, fine overall.

_______ 527 Pair of Stanley #71 router planes; one has early Script logo in bed and a 1/2-inch blade; the other is a later model with V-shaped blade, both are missing the throat closing attachments, but will still make good users.

_______ 528 Record 020C circular or compass plane in original albeit tatty box, plane is very good and box is poor.

_______ 529 Lot: Stanley #50 light duty plow plane with one blade, very good; #66 hand beader with both flat and curved fences, no blades; and & #80 scraper

_______ 530 Vaughan & Bushnell #704C "Poor Man’s Bedrock" smooth plane, complete and fine.

_______ 531 Winchester #3041 transitional smooth plane, similar to Stanley #35, complete and fine.

_______ 532 Stanley #3 Type 11 iron smooth plane Type 11, good V-logo blade, tote has glued repair in center, nice rosewood low knob, very good overall.

_______ 533 Pair of Stanley 9-in. smooth planes Two-Tone OH4, with gray bed and red frog and chipbreaker, fine overall; and a Stanley #4 with arched Rule & Level logo on blade, hardwood tote and good rosewood knob, very good overall.

_______ 534 Set of nine Japanese or Chinese chisels in roll, all like new.

_______ 535 KB Mora Sweden drawknife, near new

_______ 536 Nine assorted NOS chisels including three cranked handle, all but one of the items in this lot are new old stock.

_______ 537 Six padlocks: unknown; MILLER 6 LEVER; YALE; CORBIN (no key); YALE; and a trunk lock marked EXCELSIOR X133. All but the Corbin have keys and are working. (Lot just below saws on upper left)

_______ 538 Five Winchester socket chisels, two needing handles.

_______ 539 Stanley Handyman No. H1205 jack plane, fine

_______ 540 Eight assorted Keen Kutter socket chisels, five need handles.

_______ 541 Six assorted padlocks: MASTER (steel); JUNKUNC BROS SUCCESSORS TO AMERICAN LOCK CO.; YALE; YALE railroad type; Sargent; and EAGLE. All have keys and are in working condition. (second lot in from left in center row)

_______ 542 Lot of 13 assorted chisels and gouges, most in very good usable condition.

_______ 543 Six assorted brass padlocks: FRAIM railroad type with chain; UNION PACIFIC No. CS-21 ROADWAY & BRIDGE DEPT; STABILITY; SARGENT (no key); RUSTPROOFED; Unknown steel model. (Top second row in from left)

_______ 544 Eight assorted gouges including swept; Butcher; Sargent & Co. etc.

_______ 545 Six assorted brass padlocks: U.S. by WATERBURY with chain; CHAMPION 6 LEVER; AMERICAN LOCK CO. U.S.; FS by FRAM & SLAYMAKER; AMERICAN LOCK CO. U.S.; and CORBIN CABINET LOCK CO. U.S.

_______ 546 Lot of 12 assorted gouges and chisels

_______ 547 Three padlocks incl. USN (Navy) MAGAZINE F; USN Independent Lock Co.; and small steel master lock. All with keys and working.

_______ 548 Ten mostly Stanley socket chisels, all very good.

_______ 549 Round WINCHESTER brass padlock with key, nice working condition, very good overall.

_______ 550 Pair of mortise chisels including 7/16 John Green; and a lightly pitted GREAVES & SONS 3/8-inch.

_______ 551 Winchester padlock with Winchester key, very good.

_______ 552 Lot: two narrow cranked gouges & AMT carver?, all are fine to near new.

_______ 553 Stanley Handyman H114 miter box in original box, the miter box is very good, the box has some light shelf wear and minor staining.

_______ 554 Lot of 13 assorted carving gouges: Addis 10; 13; Buck Bros 32; Addis 31; two Millers Falls; M&C LONDON; two C. MAIERS, etc.

_______ 555 Lot: Stanly HURWOOD screwdrivers; #18 bevel; two flat-bladed screwdrivers; General 5-oz. plumb bob; wooden spokeshave; and pair of homemade steel dividers. Eight items in all.

_______ 556 Stanley HANDYMAN No. 1526 26-in. 8ppi hand saw, nice etch, very good overall.

_______ 557 Unknown 30-inch tool perhaps for metal spinning, has a smooth and thick end, very well built.

_______ 558 Stanley #248 Weather strip plane with intact fence, depth stop and prestops, very good overall.

_______ 559 Stanley #66 hand beader straight fence and one blade, very good; a #80 scraper with blade.

_______ 560 Unknown iron fence for wooden planes, very good overall.

_______ 561 Stanley #6C iron fore plane, complete & fine.

_______ 562 Pair of Stanley planes: 48 T&G with both blades, very good overall; and #191 rabbet, missing depth stop, very good overall.

_______ 563 Stanley #5 1/2C wide body jack plane, SW-logo blade, very good rosewood tote and knob, very good overall.

_______ 564 Stanley #35 prelateral transitional smooth plane, early style tote very good, beaded knob, very good overall.

_______ 565 Stanley #5 1/4 junior jack plane, complete and fine.

_______ 566 Stanley #24 prelateral transitional smooth plane, complete and fine, nice eagle on toe.

_______ 567 Stanley BEDROCK #605 FT jack plane, fine BEDROCK lever cap, good T-logo bladed, toe spur MIA and tote glued in center, with new tote it will make a fine user.

_______ 568 Stanley #39 1/2 machinist level, SW logo on top plate, fine overall.

_______ 569 Stanley BEDROCK #604FT smooth plane, V-logo blade, STANLEY lever cap, complete and fine.

_______ 570 Keen Kutter aluminum torpedo level with shaft groove on bottom, very good.

_______ 571 Stanley BEDROCK #603FT, with BEDROCK lever cap, V-logo blade, very good overall.

_______ 572 Stanley #50 light duty plow plane, no blades or depth stop, nice nickel plating.

_______ 573 Stanley #41 Millers Patent plow plane, handle cracked around the pin that secures it to the frame; good wrap-around fence with unslotted screws securing fence; one blade included. Will clean to good usable condition.

_______ 574 Pair of Stanley router planes: #71 japanned body, one blade included, good knobs, very good overall; and a later nickel plated model with open throat, one blade included, very good usable condition.

_______ 575 Fine Stanley #10 carriage maker's rabbet plane, MADE IN ENG. in near new condition.

_______ 576 POWERCRAFT MONTGOMERY WARD 84-3520 fore plane in original box, new condition.

_______ 577 Pair of like new KEEN KUTTER screwdrivers.

_______ 578 Yankee No. 75 ratchet brace, very good

_______ 579 Fine pair Keen Kutter scissors, fine etch on one blade.

_______ 580 Fine Stanley #45 combination plow plane, SW logo on skate, two boxes blades, two sets of rods, cam, has spare spurs in envelope, two original booklets, a nice a 45 as you will ever find.

_______ 581 Nice little .30 cal. ammo can.

_______ 582 Fine Stanley #140 skew bladed block plane, fine nickel on cap and screw, very good RULE & LEVEL CO. blade, fine overall.

_______ 583 Yankee No. 50 Archimedean drill, very good.

_______ 584 Seven Keen Kutter files and rasps.

_______ 585 Two near-new Keen Kutter pipe wrenches: 12-inch & 9-inch.

_______ 586 Keen Kutter 9-inch Stillson-type pipe wrench; and a Rosewood tool handle.

_______ 587 Keen Kutter K91 spokeshave, complete & very good.

_______ 588 Pair of Keen Kutter nickel plated saw sets, one fine and one very good.

_______ 589 Keen Kutter Junior razor hone in aluminum case, fine overall

_______ 590 Pair Keen Kutter 6-inch try squares, both VG.

_______ 591 Two Keen Kutter cold chisels & fine drift.

_______ 592 Keen Kutter 12-inch monkey wrench, large saw set.

_______ 593 Keen Kutter KF013 claw hammer, very good; and a Keen Kutter broad-hatchet head only.

_______ 594 Keen Kutter 26-inch hand saw, handle cracked, will clean to good usable condition.

_______ 595 Keen Kutter broad hatchet, fine overall.

_______ 596 Three Keen Kutter tools: KA13 claw hammers, fine; ball peen hammer, good; and a 1 3/4-inch chisel.

_______ 597 Pair of rosewood tool handles: one Keen Kutter that is full of bits and very nice; the other marked with Patent date Aug. 12, 1884, full of bits, cap has hold drilled thru it, very good overall.

_______ 598 Three Keen Kutter tools: glass cutter, leather punch; and bitstock screwdriver.

_______ 599 Keen Kutter 4.5-inch Cronk-type plier, smallest Cronk pliers we have seen, very good.

_______ 600 Pair of Keen Kutter tools: 6-in. end cutters, very good; Nickel plated slip-joint pliers with fine plating and KK logo, fine overall.

_______ 601 Keen Kutter 5 3/4-in. pipe wrench, and K45 5-in. dikes, both fines.

_______ 602 Keen Kutter 6-in Crescent wrench; offset plier with fine nickel plating.

_______ 603 Keen Kutter (Trimo) 8-in. adjustable pipe wrench, complete and fine.

_______ 604 Unusual Keen Kutter K26 marking gage for curved or straight work, very good.

_______ 605 Three Yankee screwdrivers: #130A; 30A; & 135A. The 135A is like new but only comes with one bit; the others show wear.

_______ 606 Early Stanley #55 Universal plow plane with patent dates in skate, comes with all four main sections, long rods, fine rosewood handle and wear strips one depth stop; needs blades, tower and cam and beading stop to complete; comes with a spare same-vintage #55 body with long rods, depth stop and left handle.

_______ 607 Stanley 45 & 46 parts planes & Stearns scraper with Stanley blade; the #45 has the nickel plated floral casting, it comes with long rods, all three main sections, one depth stop, will clean to usable condition; early #46 with no provision for rear depth stop or slitter, intact fence and auxiliary bottom, 5/16-inch blade, needs a front knob and will be very good; and a Stearns iron scraper with Stanley SW blade, very good overall.

_______ 608 Pair of mystery tools including KARAT West-Germany; and a nickel plated tool that looks like a little hog ringer.

_______ 609 Three planes: Stanley #28 transitional jack plane converted into a gutter plane, good overall; Defiance iron jack plane, needs light cleaning, complete and very good; and BEDROCK 608 flat sided jointer missing tote, knob, blade and cap, a very good body with two spar pins that attach the frog to the bed.

_______ 610 Millers Falls #85 rabbet & fillister plane, complete with fence and depth stop, very good overall.

_______ 611 Set of seven Russell Jennings auger bits, very good.

_______ 612 Six fixer upper iron bench planes: Stanley #6 with top of frog broken off; tote spur MIA, a good body; Keen Kutter KK5C missing top 1/2 of tote; the rest is rusty, will clean to at least good overall; WWII vintage #5 iron jack plane with hard rubber adjuster, has light to moderate rust, will clean to very good usable condition; Stanley #5C with good BB-logo blade, needs front knob, very good overall; Millers Falls #14C another one that is complete but rusty, will clean to at least good usable condition; and a #3 smooth plane that was brazed at the throat

_______ 613 Pair of 10-inch braces including a Stanley No. 915 that is complete and very good;

_______ 614 Estwing 16-oz. hammer, complete and very good; and a Hammond hatchet

_______ 615 Millers Falls deep throated coping saw, complete and very good.

_______ 616 Pair of ratchet braces: PEXTO 8010B, complete and fine; and a John S. Fray No.86 complete and very good.

_______ 617 Large Wm BEATTY & Son broad axe head, top painted blade, very good overall.

_______ 618 Pair of braces including Stanley #919 10-inch-X ratchet brace, needs light clearing, fine overall; and a an unknown make with wingnut to secure bit, good overall.

_______ 619 Pair of boring tools: Goodell-Pratt push drill, fine overall; and a Yankee No. 1530A hand drill, very good. (Jump from 605)

_______ 620 Pair of saws incl. Disston deep throat hack saw, complete and very good; and a Goodell-Pratt hack saw missing the two 1/3 of the handle, good overall.

_______ 621 Four pair of blacksmith tongs: Champion; ENDERS; V&B.

_______ 622 Unusual WILH. LEO STUTTGART type tray or type holder with wooden handle, fine overall.

_______ 623 Lot: reversible basin wrench; Crescent 5-inch hammer/screwdriver combo; and a 3/4-inch wooden screw box marked GERMANY.

_______ 624 Millers Falls #67 router, 1/2-inch blade, missing the foot from the throat-closing attachment, very good overall.

_______ 625 Large & fine Millers Falls chain drill that has a simple square chuck with a set screw to hold bits, but is currently holding a 2-jaw chuck, comes with length of chain and wrench to operate the upper chuck, fine overall.

_______ 626 PS&W T-auger & handle PAT MAR 20, 1888, complete and fine.

_______ 627 Stanley #95 1/2 butt gage with V-logo screw, fine overall.

_______ 628 Millers Falls #108 angle boring attachment, complete and very good.

_______ 629 Millers Falls ratcheting T-auger handle with PASSAIC MFG CO. 1 3/8-inch bit, fine overall.

_______ 630 Patented T-auger handle with two bits, very good overall.

_______ 631 Unusual combination Yankee screwdriver & brace, very good.

_______ 632 USMC (United Shoe Machinery Corp) lasting plier, very good.

_______ 633 Lot of three blacksmith tongs.

_______ 634 T.H. WITHERBY pony shave, very good; and what appears to be a Keen Kutter with short wooden handles, very good overall.

_______ 635 Zenith M.W.H. CO. (Duluth, Minn) 8-inch drawknife, fine.

_______ 636 Massive 12-inch Greenlee drawknife, fine overall

_______ 637 Two nice curve bladed drawknives: DR BARTON & L&IJ WHITE, the White has some light pitting.

_______ 638 Massive 14-inch Greenlee drawknife, very good overall.

_______ 639 One handed DICKE drawknife or shave with 5-inch blade, very good.

_______ 640 Large box of assorted screwdrivers.

_______ 641 Ten mostly Stanley chisels, three needing handles, all very good.

_______ 642 Four Stanley tools: three near new combination wrenches: and 652 ATHA chisel.

_______ 643 Lot: bench vise; large Butcher gouge needing a new handle; scraper; and a smaller Driver Line Gouge.

_______ 644 Lot: Rosewood marking and mortise gage; early #53 Stanley spokeshave; and three zig zag rules.

_______ 645 Lot: UTILAPLANE aluminum block plane, two Stanley 100 PLUS hammer heads; and three dividers.