vibronet signalmaster - predponta · 2018-10-16 · a5 vibxpert ® online systems b1 ... 3 adcs,...
TRANSCRIPT
Edition 03/2006VIB 9.662-3DG
VIBRONET®
SignalmasterTele-Monitoring &
TelediagnoseTele monitoring &
telediagnosis
KatalogCatalog
PRÜFTECHNIK
Condition Monitoring
Fax: (089) 99616-300eMail: [email protected]
Condition MonitoringZustandsüberwachung
Handheld Instruments
A 1 VIBROTIP® / VIBTOOL®
A 2 VIBROCORD®
A 3 VIBROSPECT® FFT
A 4 VIBSCANNER® / smartSCANNER™
A 5 VIBXPERT®
Online Systems
B 1 VIBREX®
B 2 VIBRONET® Master
B 3 VIBRONET® Signalmaster
B 4 VIBROWEB® / VIBROWEB® XP
B 5 VIBNODE®
Accessories
C 1 Sensors
C 2 Cables
C 3 VIBRONET® Accessories
C 4 PC Software
Product Catalog
ProduktblattProduct summary
Tele-Monitoring & -DiagnoseTele monitoring & diagnosis
VIBRONET®Signalmaster
©PR
ÜFT
ECH
NIK
Con
diti
on M
onit
orin
g | O
skar
-Mes
ster
-Str
. 19
-21
| D-8
5737
Ism
anin
g, D
euts
chla
nd |
Ver
sion
: 03
.06
Index nach BestellnummerBestellnummer Seite
Index by order numberOrder number Page
VIB 5.801 VIBRONET Signalmaster base unit,3 ADCs, without firmware B 3.3
VIB 5.802 VIBRONET Signalmaster base unit,3 ADCs, with firmware B 3.3
VIB 5.815-1 Shock pulse module with oneLineDrive input B 3.4
VIB 5.815-3 Shock pulse module with threeLineDrive inputs B 3.5
VIB 5.890-1/-3 Standard package for 9-channel-multiplexer, 1ADC/ 3ADC B 3.2
VIB 5.890-1/-3LE Standard package for 9-channel-Mux, 1ADC/ 3ADC, Limited Ed. B 3.2
VIB 5.896 Communication box B 3.12
VIB 5.897 Alarm box B 3.13
VIB 5.901 VIBRONET Signalmaster, base unit,1 ADC, without fw B 3.3
VIB 5.902 VIBRONET Signalmaster, base unit,1 ADC, with fw B 3.3
VIB 5.917 Output module withtwo SPDT relays B 3.6
VIB 5.955-x Patch cable for VIBRONETSignalmaster, X* m B 3.8
VIB 5.956-x System bus cable with x connectorsfor VIBRONET Signalmaster B 3.9
VIB 5.957-x Twisted-pair cable B 3.8
VIB 5.960-B Power supply for VIBRONETSignalmaster, 12V B 3.10
VIB 5.964-x Power supply for VIBRONETSignalmaster, 24V B 3.11
VIB 5.985 Display module forVIBRONET Signalmaster B 3.7
VIB 8.957 OMNITREND forVIBRONET Signalmaster B 3.14
VIB 8.958 OMNITREND forVIBRONET Signalmaster LE B 3.14
VIB 5.801 VIBRONET Signalmaster, Basiseinheit,3 A/D-Wandler, ohne FW B 3.3
VIB 5.802 VIBRONET Signalmaster Basiseinheit,3 A/D-Wandler, mit FW B 3.3
VIB 5.815-1 Stoßimpulsmodul mit einemLineDrive-Eingang B 3.4
VIB 5.815-3 Stoßimpulsmodul mit dreiLineDrive-Eingängen B 3.5
VIB 5.890-1/-3 Standardpaket für 9-Kanal-Multiplexer, 1ADC / 3ADC B 3.2
VIB 5.890-1/-3LE Standardpaket für 9-Kanal-MUX1ADC/ 3ADC, Limited Edition B 3.2
VIB 5.896 Kommunikationsbox B 3.12
VIB 5.897 Alarmbox B 3.13
VIB 5.901 VIBRONET Signalmaster, Basiseinheit,1 ADC, ohne FW B 3.3
VIB 5.902 VIBRONET Signalmaster Basiseinheit,1 ADC, mit FW B 3.3
VIB 5.917 Ausgangsmodul mit zweiWechselrelais-Ausgängen B 3.6
VIB 5.955-x Patchkabel für VIBRONETSignalmaster, X* m B 3.8
VIB 5.956-x Systembuskabel mit x Anschlüssenfür VIBRONET Signalmaster B 3.9
VIB 5.957-x Gekreuztes Ethernetkabel B 3.8
VIB 5.960-B Schaltnetzteile für VIBRONETSignalmaster, 12V B 3.10
VIB 5.964-x Schaltnetzteile für VIBRONETSignalmaster, 24V B 3.11
VIB 5.985 Display-Modul fürVIBRONET Signalmaster B 3.7
VIB 8.957 OMNITREND fürVIBRONET Signalmaster B 3.14
VIB 8.958 OMNITREND fürVIBRONET Signalmaster LE B 3.14
B 3.0
ProduktblattProduct summary
Tele-Monitoring & -DiagnoseTele monitoring & diagnosis
VIBRONET®Signalmaster
©PR
ÜFT
ECH
NIK
Con
diti
on M
onit
orin
g | O
skar
-Mes
ster
-Str
. 19
-21
| D-8
5737
Ism
anin
g, D
euts
chla
nd |
Ver
sion
: 03
.06
Tele-Monitoring und Tele-Diagnose mitInternet-Technologie
VIBRONET® Signalmaster ist ein neuartiges,völlig auf Internet-Technologie aufgebautesOnline-Überwachungs- und Diagnosesystemfür Maschinen und Anlagen.
Das System verfügt über einen eMail-Serverzum Versand der Messdaten per eMail undeinen Webserver, der eine grafische Benutzer-oberfläche* in Form von HTML-Seiten zur Ver-fügung stellt. Mit einem gewöhnlichen Inter-net-Browser werden die Seiten angesteuert -so als würde man sie im Interent “ansurfen”.
Das System läßt sich applikationsspezisch miteiner Reihe von Programm-Modulen erwei-tern:
• Bandanalyse-Modul zur automatischen Aus-wertung komplexer Schwingungsvorgängein Wälzlagern, Getrieben oder Sonderma-schinen.
• Cepstrumanalyse
B 3.1
Tele monitoring and tele diagnosis withinternet technology
STRING No.
Strin
g N
o.
STRING No.
Strin
g N
o.
STRING No.
Strin
g N
o.
SIGNALMASTER
VIBRONET R
RE-START
LOG-BOOK
STOP
LIGHT
STRING No.
Strin
g N
o.
The VIBRONET® Signalmaster is a new type ofonline monitoring and diagnostic system formachines and systems based entirely on Inter-net technology.
The system has an eMail server for sendingmeasurement data by eMail and a web serverthat provides a graphical HTML user inter-face*. The pages are controlled in the sameway as for surfing the Internet using a stan-dard Internet browser.
The system can be expanded by a series ofprogram modules that are specific to the appli-cation:
• Band analysis module for the automaticevaluation of complex vibration processes inrolling bearings, gears or special machines.
• Cepstrum analysis
B3.1 ... B3.1b
*kundenspezifische Gestaltung optional * customized design is optional
ProduktblattProduct summary
©PR
ÜFT
ECH
NIK
Con
diti
on M
onit
orin
g | O
skar
-Mes
ster
-Str
. 19
-21
| D-8
5737
Ism
anin
g, D
euts
chla
nd |
Ver
sion
: 03
.06
B 3.1a
• Orbit analysis• Data server for the automatic or event-
controlled read out of data and for transfer-ring them to higher systems
SoftwareAll functions are provided by Java applets. Thefollowing range of functions is included in thestandard version:
• Standardized graphic user interface• List of all locations in the alarm state• List of all locations in the warning state• List of all locations with sensor error• Trend history for each aggregate showing
all essential events (with OMNITREND PCsoftware only)
• Trend export of the data to the PC• Online diagnosis: Velocity, acceleration and
envelope spectrums, as well as time recordsfor all acceleration transducers.
• Alarm spectrum: The system measures andstores alarm signals (e.g. alarm spectra) au-tomatically if alarm or warning limits areexceeded for the measuring location con-cerned.
Option• Condition overview indicated on the ma-
chine diagram by a change of colours (red,yellow, green)
• Online trend: General overview of the char-acteristic values and their current trend.
• Online meter: Displays the current overallvalues; change of colours when thresholdvalues are exceeded.
AutomationThe VIBRONET® Signalmaster is not only amonitoring system. Due to its programmingcapability, it can operate as an automatedsystem that is also in a position to controlprocess and measurement parameters and per-forms detailed analyses on complex systems(optional).
The VIBRONET® Signalmaster can be pro-grammed so that it only indicates the possibleinitial indications of specific damage, and doesnot make the operator unsure by issuingvague alarm messages.
• Orbitanalyse• Datenserver zum automatischen oder ereig-
nisgesteuerten Auslesen der Daten und zurWeitergabe an übergeordnete Systeme
SoftwareAlle Funktionen werden von Java-Applets zurVerfügung gestellt. Die Standardversion ver-fügt über folgende Funktionsumfang:
• Standardisierte grafische Benutzeroberflä-che
• Liste der Messstellen im Alarmzustand• Liste der Messstellen im Warnzustand• Liste der Messstellen mit Sensorfehler• Trendhistorie für jedes Aggregat mit allen
wesentlichen Ereignissen (nur mit OMNI-TREND PC Software)
• Trend-Export der Daten auf den PC• Online-Diagnose: Geschwindigkeits-, Be-
schleunigungs- und Hüllkurvenspektrum so-wie Zeitschrieb für alle Beschleunigungsauf-nehmer.
• Alarmspektrum: Bei Überschreitung vonAlarm- oder Warngrenzen mißt und spei-chert das System Alarmsignale (z.B. Alarm-spektren) für die betreffende Messstelle au-tomatisch.
Optional:• Zustandsübersicht im Maschinenbild mit
Farbumschlag (rot, gelb, grün) bei Grenz-wertüberschreitung.
• Online-Trend: Gesamtübersicht der Kenn-werte und deren aktuelle Entwicklung.
• Online-Meter: Anzeige der aktuellen Kenn-werte mit Farbumschlag bei Grenzwertüber-schreitung.
AutomatisierungVIBRONET® Signalmaster ist nicht nur ein Über-wachungssystem. Durch die Programmierum-gebung wird es zum automatisierbaren Sys-tem, das auch in der Lage ist, Aktoren zusteuern und detaillierte Analysen an komple-xen Systemen auszuführen (optional).
VIBRONET® Signalmaster kann so program-miert werden, dass man wirklich nur gezieltauf einen möglichen beginnenden Schadenhingewiesen und nicht mit einer diffusen
B3.1 ... B3.1b
ProduktblattProduct summary
Tele-Monitoring & -DiagnoseTele monitoring & diagnosis
VIBRONET®Signalmaster
©PR
ÜFT
ECH
NIK
Con
diti
on M
onit
orin
g | O
skar
-Mes
ster
-Str
. 19
-21
| D-8
5737
Ism
anin
g, D
euts
chla
nd |
Ver
sion
: 03
.06
Externe AnbindungJeder VIBRONET Signalmaster arbeitet alsWebserver. Die Standard-Datenschnittstelle istdeshalb das Internet-Protokoll TCP/IP. Der VIB-RONET Signalmaster kann so direkt als weite-rer Computer in ein bestehendes Netzwerkintegriert werden. Der Datenzugriff ist dannvon jedem Punkt des Netzes oder, über einenRouter, auch von Außen möglich. Das optiona-le Internet-Zugangsmodul erlaubt dem VIBRO-NET Signalmaster die Aufnahme einer Verbin-dung zu einem Internet Service Provider (ISP)und damit den Versand von eMails. Vor Ort istder Datenaustausch über ein Ethernet-Patch-kabel (TCP/IP) oder eine serielle Kabelverbin-dung über die RS232-Schnittstelle möglich(SLIP - Protokoll).
Weitere Kommunikationsmöglichkeiten sind• GSM-Modem• Funk-Ethernet• Satellitenkommunikation• Feldbus-Anbindung• DDE-Anbindung an PLS
KonfigurationDas Standardsystem wird nach den Erforder-nissen der zu überwachenden Maschinen fer-tig konfiguriert. Dies umfaßt die Programmie-rung, die Erstellung der HTML-Seiten als Be-dienoberfläche und die Erstkonfiguration derWarn- und Alarmwerte.
B 3.1b
External connectionEvery VIBRONET Signalmaster operates as aweb server. Therefore, the standard data inter-face is the TCP/IP Internet protocol. Thus, theVIBRONET Signalmaster can be integrated di-rectly as another computer in an existing net-work. Data can then be accessed from anypoint in the network or, even from outside thenetwork via a router. The optional Internetaccess module enables the VIBRONET Signal-master to establish a connection to an InternetService Provider (ISP) and, consequently, tosend eMails. Data exchange on site is possiblevia an Ethernet patch cable (TCP/IP) or a serialcable connection via the RS232 interface (SLIPprotocol).
Further possibilities for communication in-clude:• GSM modem• Radio Ethernet• Satellite communication• Fieldbus connection• DDE connection to the PLC
ConfigurationThe system is preconfigured according to therequirements of the machines to be moni-tored. This includes the programming, creatingHTML pages as the user interface and theinitial configuration of the warning and alarmvalues.
B3.1 ... B3.1b
Alarmmeldung verunsichert wird.Statt der Meldung “Schwingungsüberwa-chung meldet Alarm” kann der VIBRONETSignalmaster “Beginnender Schaden an 2. Ge-triebestufe Mischergetriebe 5, Stoffaufberei-tung” als SMS auf das Handy oder zum Stör-meldesystem in der Leitwarte schicken.
Instead of the message “Vibration monitoringregisters alarm”, the VIBRONET Signalmastercan send “Damage beginning on 2nd. gearstage mixer gear 5, material preparation” as anSMS to a cell phone or to a fault reportingsystem in the control room.
ProduktblattProduct summary
Tele-Monitoring & -DiagnoseTele monitoring & diagnosis
VIBRONET®Signalmaster
©PR
ÜFT
ECH
NIK
Con
diti
on M
onit
orin
g | O
skar
-Mes
ster
-Str
. 19
-21
| D-8
5737
Ism
anin
g, D
euts
chla
nd |
Ver
sion
: 03
.06
POWER
ONLINE
DSRDCD
CTSRTS
DTR
POWER
ONLINE
DSRDCD
CTSRTS
DTR
Installationsbeispiel A:Überwachung kompakter Einzelaggregate mitwenigen Messstellen (max. 6 Aufnehmer).
Installation example A:Monitoring of compact individual aggregateswith few measurement locations (max. 6 sen-sors).
VIB 8.957OMNITREND PC software
WWW-Browser(Netscape/ Internet Explorer)
VIB 5.934Modem (PC)
VIB 5.931Modem
VIB 5.822RS 232 cable
VIB 5.930Internet-Zugangsmodul /Internet access module
VIB 5.955-xPatch cable (RJ 45)
VIB 5.960-BNetzteil / power supply
VIB 5.902VIBRONET
Signalmaster
VIB 5.816Anschlußmodul /Connection module
VIB 6.122Beschleunigungsaufnehmer /Accelerometer
PLS / PLC
VIB 5.912Digital I/O module
VIB 5.956-xSystembus
Alarm
Internet
max. 30 m
/ 98 ft
B 3.1dB3.1d ... B3.1k
ProduktblattProduct summary
©PR
ÜFT
ECH
NIK
Con
diti
on M
onit
orin
g | O
skar
-Mes
ster
-Str
. 19
-21
| D-8
5737
Ism
anin
g, D
euts
chla
nd |
Ver
sion
: 03
.06
POWER
ONLINE
DSRDCD
CTSRTS
DTR
POWER
ONLINE
DSRDCD
CTSRTS
DTR
B 3.1e
Installationsbeispiel B:Überwachung komplexer Einzelaggregateoder kleinerer Aggregate-Gruppen (max. 37Aufnehmer).
Installation example B:Monitoring of complex individual aggregatesor smaller groups of aggregates (max. 37sensors).
VIB 8.957OMNITREND PC software
WWW-Browser(Netscape/ Internet Explorer)
VIB 5.934Modem (PC)
VIB 5.931Modem
VIB 5.822RS 232 cable
VIB 5.930Internet-Zugangsmodul /Internet access module
VIB 5.955-xPatch cable (RJ 45)
VIB 5.960-BNetzteil / power supply
VIB 5.902VIBRONET
Signalmaster
VIB 5.816Anschlußmodul /Connection module
VIB 6.122Beschleunigungsaufnehmer /Accelerometer
PLS / PLC
VIB 5.912Digital I/O module
VIB 5.956-xSystembus
VIB 5.818-NMultiplexer
VIB 5.956-xSystembus
Alarm
Internet
max. 100 m
/ 328 ft(triax cable)
B3.1d ... B3.1k
ProduktblattProduct summary
Tele-Monitoring & -DiagnoseTele monitoring & diagnosis
VIBRONET®Signalmaster
©PR
ÜFT
ECH
NIK
Con
diti
on M
onit
orin
g | O
skar
-Mes
ster
-Str
. 19
-21
| D-8
5737
Ism
anin
g, D
euts
chla
nd |
Ver
sion
: 03
.06
B 3.1f
SP
M B
US
SY
ST
EM
BU
S
Str
ing
1S
trin
g 2
Str
ing
3
Installationsbeispiel C:Überwachung vieler Einzelaggregate in weit-läufigen Anlagen (max. 108 Aufnehmer imMultiplexbetrieb).
Installation example C:Monitoring of many individual aggregates inwidespread systems (max. 108 sensors in multi-plexed operation).
VIB 8.957OMNITREND PC software
WWW-Browser(Netscape/ Internet Explorer)
VIB 5.960-BNetzteil / power supply VIB 5.902
VIBRONET Signalmaster
PLS / PLC
VIB 5.912Digital I/O module
VIB 5.818-NMultiplexer
VIB 5.956-xSystembus
LAN / WAN
VIB 5.955-xPatch cable (RJ 45)
VIB 5.959Ethernet-Hub
VIB 8.3069-Kanal-Multiplexer
Alarm
Einflußgrößen /Influencing parameters
VIB 5.956-xSystembus
VIB 5.815-3Anschlußmodul /
Connection module
max. 800 m
/ 2624 ft
B3.1d ... B3.1k
ProduktblattProduct summary
©PR
ÜFT
ECH
NIK
Con
diti
on M
onit
orin
g | O
skar
-Mes
ster
-Str
. 19
-21
| D-8
5737
Ism
anin
g, D
euts
chla
nd |
Ver
sion
: 03
.06
POWER
ONLINE
DSRDCD
CTSRTS
DTR
POWER
ONLINE
DSRDCD
CTSRTS
DTR
B 3.1g
LAN / WAN
VIB 5.955-xPatch cable (RJ 45)
VIB 5.934Modem (PC)
VIB 5.931Modem
VIB 5.822RS 232 cableVIB 5.930
Internet-Zugangsmodul /Internet access module
InternetVIB 5.959Ethernet-Hub
VIB 5.858-GNRS 232 cable
VIB 5.957-2Ethernet cable
VIBRONET Signalmaster
Kommunikationsbeispiel 1:Lokale Kommunikation über Ethernet (LAN/WAN), globaler Datenaustausch über Internet.
Kommunikationsbeispiel 2:Direktverbindung via RS 232- oder Ethernet-Schnittstelle
Communication example 1:Local communication via ethernet (LAN/WAN), global data exchange via internet.
Communication example 2:Direct connection via RS 232 or ethernet inter-face
VIB 5.955-xPatch cable (RJ 45)
VIB 8.957OMNITREND PC software
WWW-Browser(Netscape/ Internet Explorer)
VIB 8.957OMNITREND PC software
WWW-Browser(Netscape/ Internet Explorer)
VIBRONET Signalmaster
B3.1d ... B3.1k
ProduktblattProduct summary
Tele-Monitoring & -DiagnoseTele monitoring & diagnosis
VIBRONET®Signalmaster
©PR
ÜFT
ECH
NIK
Con
diti
on M
onit
orin
g | O
skar
-Mes
ster
-Str
. 19
-21
| D-8
5737
Ism
anin
g, D
euts
chla
nd |
Ver
sion
: 03
.06
B 3.1h
Schnittstellen zu Aufnehmern:Anbindung an Schwingungsaufnehmer (ICP,CLD*-Stromausgang) und Mikrofon via An-schlußmodule.
Interfaces to transducers:Connection to accelerometers (ICP®, currentLineDrive) and microphone via connection mo-dule.
Schnittstellen zu Aufnehmern:Anbindung via Feldmultiplexer (VIB 8.306) undStoßimpulsmodul (VIB 5.815-1/1).
Interfaces to transducers:Connection via field multiplexer (VIB 8.306)and shock pulse module (VIB 5.815-1/1).
VIBRONET SignalmasterVIB 5.818-NMultiplexer
VIB 5.956-xSystembus
VIB 5.812-ICPAnschlußmodul (ICP®) /Connection module (ICP®)
Sub-D 50
VIB 5.816Anschlußmodul (CLD) /Connection module (CLD) VIB 6.122
Beschleunigungsaufn. /Accelerometer
Mikrofon /microphone
Schwing.aufnehmer /Vibr. transducer (ICP®)
* CLD: Current LineDrive
100mV/g
Line Drive
VIBRONET Signalmaster VIB 5.815-1/1Stoßimpulsmodul /Shock pulse module
VIB 5.956-xSystembus
Coax / Triax (RG58)
VIB 8.306Feld-Multiplexer (9-Kanal) /Field multiplexer (9 channels)
zum Schwingungsaufnehmer /to vibration sensor
VIB 8.313Drehzahlmodul /RPM module
VIB 8.310Temperaturmodul /Tempearture module
VIB 8.312Strom - Spannungsmodul /Current - Voltage module
B3.1d ... B3.1k
ProduktblattProduct summary
©PR
ÜFT
ECH
NIK
Con
diti
on M
onit
orin
g | O
skar
-Mes
ster
-Str
. 19
-21
| D-8
5737
Ism
anin
g, D
euts
chla
nd |
Ver
sion
: 03
.06
Schnittstellen zu Aufnehmern:Widerstandsmessung (z.B. PT100) via Multiple-xer mit Stromquelle.
Interfaces to transducers:Resistance measurement (e.g. PT100) via multi-plexer with current supply.
B 3.1i
Schnittstellen zu Aufnehmern:Wegmessung via Multiplexer mit 4x4 synchro-nen Eingängen. Orbitmessung mit Wegauf-nehmern und Drehzahlsensor (Key phaser).
Interfaces to transducers:Displacement measurement via multiplexerwith 4x4 synchronous inputs. Orbit with dis-placement transducers and key phaser.
VIB 5.818-SMultiplexer
VIB 5.956-xSystembus
VIBRONET Signalmaster
PT100
U
I
Sub-D 50
VIB 5.956-xSystembus
Wegaufnehmer /Displacementtransducer(API standard )
0V
-24V
VIB 5.964-xSchaltnetzteil
AC-Spannungvon gepuffertenAusgang /AC voltage frombuffered output
Sub-D 50
VIB 5.802VIBRONET Signalmaster,3 Kanäle / 3 channels
VIB 5.818-4x4Multiplexer
Key phaser
Bank 1 Bank 2 Bank 3 Bank 4
VIB 5.956-xSystembus
B3.1d ... B3.1k
ProduktblattProduct summary
Tele-Monitoring & -DiagnoseTele monitoring & diagnosis
VIBRONET®Signalmaster
©PR
ÜFT
ECH
NIK
Con
diti
on M
onit
orin
g | O
skar
-Mes
ster
-Str
. 19
-21
| D-8
5737
Ism
anin
g, D
euts
chla
nd |
Ver
sion
: 03
.06
Schnittstellen zu PLS / SPS:Anbindung an Prozessleitsysteme und Steue-rungen via Multiplexer und digitale Eingangs-erweiterungen (max. 16 Eingänge pro Modul).
Interfaces to PCS / PLC:Connection to control systems via multiplexerand digital input modules (up to 16 inputs permodule).
B 3.1j
VIB 5.956-xSystembus
VIB 5.818-NVIB 5.819-4x4VIB 5.819-8x2VIB 5.820-RNMultiplexer
VIB 5.956-xSystembus
VIBRONET Signalmaster
TrennversträrkerBuffer amplifier
TrennversträrkerBuffer amplifier
0 - 10 V
4 - 20 mA
PLS / PCS
SPS / PLC
VIB 5.911VIB 5.912Digital I/O
VIB 5.972FunktionsklemmeFunction terminal
PLS / PCS
SPS / PLC
Sub-D 50
Sub-D 50
Sub-D 50
B3.1d ... B3.1k
ProduktblattProduct summary
©PR
ÜFT
ECH
NIK
Con
diti
on M
onit
orin
g | O
skar
-Mes
ster
-Str
. 19
-21
| D-8
5737
Ism
anin
g, D
euts
chla
nd |
Ver
sion
: 03
.06
Schnittstellen zu PLS / SPS:Direkte Anbindung an Prozessleitsysteme undSteuerungen via interne digitale Ein-/ Ausgän-ge (maximal 4 dig. I/O und 4 dig. Out).
Interfaces to PCS / PLC:Direct connection to control systems via inter-nal digital In-/ Outputs (up to 4 dig. I/O and 4dig. Out).
Schnittstellen zu PLS / SPS:Anbindung an Modbus Plus Feldbus via inter-nes Software-Modul.
Interfaces to PCS / PLC:Connection to Modbus Plus fieldbus via inter-nal software module.
B 3.1k
PLS / PCS
SPS / PLCRS 232 / 485
converter Modbus Plus
VIBRONET Signalmaster
RS 232 / 2
PLS / PCS
SPS / PLC
VIBRONET Signalmaster
Opto-Koppler
VIB 5.917Modul mit 2 WechselrelaisModule with 2 SPDT relais
Opto coupler
Dig. I/ODig. OUT
Dig. IN
TTL
5 V (pot. free)
Dig. IN
Sub-D 50
B3.1d ... B3.1k
ProduktblattProduct summary
Tele-Monitoring & -DiagnoseTele monitoring & diagnosis
VIBRONET® Signalmaster©
PRÜ
FTEC
HN
IKC
ondi
tion
Mon
itor
ing
| Osk
ar-M
esst
er-S
tr.
19-2
1 | D
-857
37 Is
man
ing,
Deu
tsch
land
| V
ersi
on:
03.0
6
B 3.2
VIB 5.890-1 Standard package for onemultiplexer string line
Standardpaket für einenMultiplexer-Leitungsstrang
VIB 5.890-3 -, 3 Multiplexer-Leitungsstränge -, 3 multiplexer string lines
Dieses Paket wird zur Überwachung von Stan-dard-Aggregaten eingesetzt (z.B. Motor, Pum-pe, Lüfter,...). An einem Leitungsstrang kön-nen bis zu 6 Feldmultiplexer (VIB 8.306) mit 9Aufnehmern angeschlossen werden**. Sämtli-che Komponenten sind in einem stabilenSchaltschrank montiert und verkabelt.
Inhalt für VIB 5.890-1*:
VIB 5.902 VIBRONET Signalmaster,1 ADCVIB 5.960-B Schaltnetzteil, 12VVIB 5.956-2 Systembus mit 2 SteckerVIB 5.815-1/1 Stoßimpulsmodul für 1 Lei-
tungsstrang (Strom-LineDrive)VIB 5.885 Firmware-Modul 'Standard'* inkl. Schaltschrank und Patch-Kabel** (max. 162 Aufnehmer bei 3-Kanal-System)
This package is used to monitor standardaggregates (i.e. motor, pump, blower,...). Upto 6 field multiplexers (VIB 8.306) with 9transducers can be connected in a string**. Allcomponents are mounted and wired in astable cabinet.
The VIB 5.890-1* package contains:
VIB 5.902 VIBRONET Signalmaster,1 adcVIB 5.960-B Power supply, 12VVIB 5.956-2 Systembus with 2 connectorsVIB 5.815-1/1 Shock pulse module for one
string line (Current LineDrive)VIB 5.885 Firmware module 'Standard'* incl. cabinet and patch cable** (up to 162 channels for the 3 string line system)
VIBRONET® Multiplexer(VIB 8.306)
VIB 5.815-1
VIB 5.902
VIB 5.960-B
VIB 5.890-1 VIB 5.890-3
VIB 5.917
VIB 5.815-3
VIB 5.902
VIB 5.960-BVIB 5.917
B3.2 ... B3.2a
VIB 5.890-1LE -, 1 MUX-Strang, Limited Edition -, 1 MUX string line, limited edition
VIB 5.890-3LE -, 3 MUX-Stränge, Limited Edition -, 3 MUX string lines, limited edition
ProduktblattProduct summary
©PR
ÜFT
ECH
NIK
Con
diti
on M
onit
orin
g | O
skar
-Mes
ster
-Str
. 19
-21
| D-8
5737
Ism
anin
g, D
euts
chla
nd |
Ver
sion
: 03
.06
B 3.2aB3.2 ... B3.2a
VIB 5.917 Ausgangsmodul mit 2 Wechsel-relais
VIB 9.520.D InstallationsanleitungVIB 9.662-3 ProduktkatalogVIB 9.663-3 Zubehörkatalog
Inhalt für VIB 5.890-1LE wie VIB 5.890-1,außer:
VIB 5.885 LE Firmware-Module 'Limited'
Inhalt für VIB 5.890-3 wie VIB 5.890-1, außer:
VIB 5.815-3 Stoßimpulsmodul für 3 Lei-tungsstränge (Strom-LineDrive)
Inhalt für VIB 5.890-3LE wie VIB 5.890-3,außer:
VIB 5.885 LE Firmware-Module 'Limited'
Mit dem Standardpaket 'Limited Edition'(VIB 5.890-1/3LE) können keine Spektren/ Zeit-signale sondern nur nur Kennwerte und Pro-zessparameter aufgenommen werden.
VIB 5.917 Output module with two SPDTrelais
VIB 9.520.G Installation instructionsVIB 9.662-3 Product catalogVIB 9.663-3 Accessories catalog
Package contents for VIB 5.890-1LE are thesame as for VIB 5.890-1, except:
VIB 5.885 LE Firmware module 'Limited'
Package contents for VIB 5.890-3 are the sameas for VIB 5.890-1, except:
VIB 5.815-3 Shock pulse module for threestring lines (Current LineDrive)
Package contents for VIB 5.890-3LE are thesame as for VIB 5.890-3, except:
VIB 5.885 LE Firmware module 'Limited'
The standard Limited Edition (VIB 5.890-1/3LE) package can record characteristic valuesand process parameters, but not spectra/ timesignals.
ProduktblattProduct summary
Tele-Monitoring & -DiagnoseTele monitoring & diagnosis
VIBRONET®Signalmaster
©PR
ÜFT
ECH
NIK
Con
diti
on M
onit
orin
g | O
skar
-Mes
ster
-Str
. 19
-21
| D-8
5737
Ism
anin
g, D
euts
chla
nd |
Ver
sion
: 03
.06
VIB 5.802
VIB 5.801 -, ohne Firmware -, without firmware
VIB 5.801-EV -, mit Option 'Event recording' -, with option 'event recording'
VIB 5.902 -, 1 ADC, mit Firmware -, 1 ADC, with firmware
VIB 5.901 -, ohne Firmware -, without firmware
B 3.3
Signalmaster base unit,3 ADC, with firmware
Signalmaster Basiseinheit,3 ADC, mit Firmware
AnwendungTrendanalyse und FFT-Schwingungsdiagnoseder überwachten Mess-Stellen wahlweiseüber einen Eingang oder drei paralelle Ein-gänge.
FunktionDie VIBRONET Signalmaster-Basiseinheit ver-eint die Eigenschaften von intelligenten Da-tenloggern, Transientenrekordern, Klassierge-räten, speicherprogrammierbaren Steuerun-gen und Meldesystemen.
Die gängigen physikalischen Sensoren (z.B. fürTemperatur, Druck, Durchfluss, Kraft, Dreh-zahl, Drehmoment, Beschleunigung, usw.)können direkt angeschlossen werden. Für dieSteuerung von Aktoren stehen digitale Aus-gänge zur Verfügung. Mit den Erweiterungs-modulen können auch analoge Ausgänge be-reitgestellt werden. Externe Datengeräte las-sen sich über Standrad-Schnittstellen wie RS-232 oder Ethernet anschließen.
ApplicationTrend analysis and FFT vibration diagnosis ofthe monitored measuring locations via a singleinput or three parallel inputs.
FunctionThe VIBRONET Signalmaster base unit com-bines the features of intelligent data loggers,transient recorders, classifying instruments,stored programmable control units and re-cording systems.
The current physical sensors (e.g. for tempera-ture, pressure, flow, power, RPM, torque, ac-celeration, etc.) can be directly connected.Digital outputs are available for controllingactors. The add-on modules also provide ana-log outputs. External data devices can beconnected via standard interfaces such as RS-232 or Ethernet.
The VIBRONET Signalmaster provides a widerange of mathematical functions.
System bus (15p)
Multi-IO (50p)
LAN (RJ45) RS232
RS232
B3.3 ... B3.3h
ProduktblattProduct summary
©PR
ÜFT
ECH
NIK
Con
diti
on M
onit
orin
g | O
skar
-Mes
ster
-Str
. 19
-21
| D-8
5737
Ism
anin
g, D
euts
chla
nd |
Ver
sion
: 03
.06
B 3.3a
Signalmaster:Funktionalität und Kommunikation
HTMLpages
Setups
Data
Javaapplets
HTTPServer
Sensors
Interfaces
VIBRONET® Signalmaster
VIBRONET® Master
TCP/IP
TCP/IP
TCP/IPTelefon
Intranet
Internet Internet provider
LAN, WAN
analog, ISDN, GSM
GSMpager
RS 232
TCP/IPNotebook
HTML, Java
eMailFirewall
PC, browser,mail server
FAXeMail
Signalmaster:Functionality and communication
Der VIBRONET Signalmaster verfügt über um-fangreiche mathematischen Funktionen.
Mehrere Signalmaster-Basiseinheiten könnenper Ethernet miteinander oder mit anderenGeräten, PCs oder Routern vernetzt werden.Die Basiseinheit verfügt über TCP/IP, einenintegrierten Webserver (HTTP und FTP) undeinen optionalen E-Mail-Server. Die Bedie-nungs-, Visualisierungs- und Auswertesoftwa-re ist in Form von dynamischen HTML-Seitenund Java-Applets im Flash-Speicher der Signal-master-Basiseinheit gespeichert. Die TCP/IP-Kommunikation erfolgt über Internet, Intra-net, LAN, Funk-LAN, ISDN, Telefon, GSM undRS232. Die Anbindung an Feldbussysteme undProzessleitsysteme erfolgt mit entsprechendkonfigurierten Anschlußmodulen.
Das Echtzeit-Multitasking-Betriebssystem ko-ordiniert das Zusammenspiel von Anwen-dungsprogrammen, Datenverarbeitung, Da-tenspeicherung, Kommunikation und System-überwachung.
Several Signalmaster base units can be net-worked either with one another via Ethernetor with other devices, PCs or routers. The baseunit has TCP/IP, an integrated Web server(HTTP and FTP) and an optional Email server.The operation, visualization and evaluationsoftware is stored in the form of dynamicHTML pages and Java Applets in the Flashmemory of the Signalmaster base unit. TCP/IPcommunication is carried out via Internet, In-tranet, LAN, radio LAN, ISDN, telephone, GSMand RS232. The Signalmaster base unit is con-nected to field bus systems and process controlsystems via appropriately configured connec-tion modules.
The real time multi-tasking operating systemcoordinates the interplay of application pro-grams, data processing, data storage, commu-nication and system monitoring.
B3.3 ... B3.hi
ProduktblattProduct summary
Tele-Monitoring & -DiagnoseTele monitoring & diagnosis
VIBRONET®Signalmaster
©PR
ÜFT
ECH
NIK
Con
diti
on M
onit
orin
g | O
skar
-Mes
ster
-Str
. 19
-21
| D-8
5737
Ism
anin
g, D
euts
chla
nd |
Ver
sion
: 03
.06
B 3.3b
Die Programmierung der Signalmaster-Basis-einheit erfolgt mit dem Java-Programmgene-rator 'ProgaLog'. Der Anwender kann die Mes-sparameter und Grenzwerte bequem mit derOMNITREND PC Software einstellen und opti-mieren.
Die Basiseinheit ist für den autonomen Einsatzin einer Industrieumgebung geeignet. Sie istauf Tropentauglichkeit und elektromagneti-sche Verträglichkeit getestet.
Im Standardpaket (VIB 5.890-1/-3) kann dieBasiseinheit Kennwerte und Signale messen. Inder Version 'Limited Edition' (VIB 5.890-1/-3LE)können nur Kennwerte aufgenommen wer-den.
The programming of the Signalmaster baseunit is carried out using the Java programgenerator 'ProgaLog'. The user can comfort-ably set up and optimize the measurementparameters and limiting values with the OMNI-TREND PC software.
The Signalmaster base unit is suitable for au-tonomous use in an industrial environment. Ithas been tested for tropical climate resistanceand electromagnetic compatability.
The base unit in the standard package (VIB5.890-1/-3) can measure characteristic valuesand signals. The 'Limited Edition' version (VIB5.890-1/-3LE) can only record characteristic val-ues.
Technische DatenAnalogeingänge VIB 5.802 / 5.801
6 differentielle Eingänge (3 davon synchron) oder 2 differenti-elle und 8 massebezogene Eingänge, frei kombinierbar
VIB 5.902 / 5.9016 differentielle Eingänge (1 davon synchron) oder 12massebezogene Eingänge
Messbereiche, Analogeingang±10 V, ±1 V, ±100 mV, ±10 mV
Dynamik / Auflösung96 dB / 16 bit
Genauigkeit, Analogeingang0,05% v.E.
Gleichtaktunterdrückung> 115 dB bei einer Verstärkung von 60 dB
Temperaturkoeffizient, Analogeingang20 ppm / K
SignalkopplungDC (AC/DC auf den synchronen Differenzeingängen)
Eingangs-SchutzbeschaltungSynchroner Differenzeingang: ± 30 VDifferenzeingang: ± 13 VDigitaleingang: + 7 V
Abtastrate, Analogeingang153,6 / 76,8 / 38,4 / 19,2 / 9,6 kHzSW-Downsampling: 4,8 / 2,4 / 1,2 / 0,6 / 0,3 / 0,15 kHz
Frequenzbereich48 kHz bis 48 Hz in 11 Bereiche unterteilt
AntialiasingDynamische Anpassung
Phasenfehler, synchrone Analogeingänge< 0,05 %
Übersprechen zwischen Analogeingängen< -100 dB
Dynamischer Amplitudenfehler< -0,1 dB (bis 50% der jeweils max. Signalfrequenz)< - 0,5 dB (bis 75% der jeweils max. Signalfrequenz)< -1,0 dB (bis 80% der jeweils max. Signalfrequenz)< - 3,0 dB (bis 100% der jeweils max. Signalfrequenz)
Technical dataAnalog inputs VIB 5.802 / 5.801
6 differential inputs (3 of them synchronous) or 2 differentialand 8 single-ended inputs, freely combinable
VIB 5.902 / 5.9016 differential inputs (1 of them synchronous) or 12 single-ended inputs
Measurement range, analog input±10 V, ±1 V, ±100 mV, ±10 mV
Dynamic Range / Resolution96 dB / 16 bit
Accuracy, analog input0,05% of full scale
Common mode rejection> 115 dB at an amplification of 60 dB
Temperature coefficient, analog input20 ppm / K
Signal couplingDC (AC/DC on the differential synchr. inputs)
Input protectionSimultaneous diff. input: ± 30 VDiff. input: ± 13 VDigital input: + 7 V
Sampling rate, analog inputs153,6 / 76,8 / 38,4 / 19,2 / 9,6 kHzSW-Downsampling: 4,8 / 2,4 / 1,2 / 0,6 / 0,3 / 0,15 kHz
Frequency range48 kHz bis 48 Hz subdevided into 11 areas
AntialiasingDynamic adaptation
Phase error, synchronous analog inputs< 0,05 %
Crosstalk between analog inputs< -100 dB
Dynamic amplitude errors< -0.1 dB (up to 50% of the max. signal frequency)< - 0.5 dB (up to 75% of the max. signal frequency)< -1.0 dB (up to 80% of the max. signal frequency)< - 3.0 dB (up to 100% of the max. signal frequency)
B3.3 ... B3.3h
ProduktblattProduct summary
©PR
ÜFT
ECH
NIK
Con
diti
on M
onit
orin
g | O
skar
-Mes
ster
-Str
. 19
-21
| D-8
5737
Ism
anin
g, D
euts
chla
nd |
Ver
sion
: 03
.06
B 3.3c
Frequenzauflösung400, 800, 1600, 3200, 6400, 12800 Linien
HüllkurveWählbare digitale Eingangsfilter
Drehzahl / Zählereingänge2, TTL (Low aktiv)Max. Zählerfrequenz: 1000 Hz
TriggereingangTTL, (Low aktiv)
Digitale Ein-/Ausgänge4, Eingang: TTL, Ausgang: 5V, 5 mA
Digitale Ausgänge4 Ausgänge, 5V, 5 mA
FET-Schaltausgang12 V DC, 1A, schaltbar
Sensor-Speiseausgänge3 Stromquellen, 2 mA fest, ICP®-kompatibel,Genauigkeit: 0,2%
Erweiterte Kanalanzahlexterne Multiplexer für analoge und digitale Kanäle
BetriebsartenFrequenz-Bandanalyse, Transientenspeicher, Online-Klassie-rung , Trendaufzeichnung
MessfunktionenZeitsignal, Spektrum, einfache Integration des Spektrums,Hüllkurve, Orbit, Stoßimpuls, Beschleunigung (RMS),Geschwindigkeit (Peak, RMS)
RAM Speicherkapazität8 MB (optional 20 MB)
Flash-Memory Speicherkapazität16 MB (optional 24MB oder 48 MB)
Ethernet-SchnittstelleAnzahl: 1, Datenrate: 10 Mbit
RS 232 SchnittstelleAnzahl: 2, Datenrate: 38,4 kBit
Stromversorgung5,25 V (± 3%) / 3 A und 12 V (± 5%) / 1,2 A
Abmessungenca. 26 x 13 x 15 cm (LxBxH)
Gesamtgewichtca. 2,2 kg
Relative Feuchte10% bis 100%, Betauung ist zulässig
Arbeitstemperatur-20°C bis + 70°C
Schockbelastbarkeit30g
Vibrationsbelastbarkeit2g Konstantbeschleunigung im Bereich 10 bis 150 Hz
Frequency resolution400, 800, 1600, 3200, 6400, 12800 lines
EnvelopeDigital input filter, selectable
Tacho inputs2, TTL (active low)Max. counter frequency: 1000 Hz
Key phaser inputTTL (active low)
Digital In-/outputs4, input: TTL, output: 5V, 5 mA
Digital output4 outputs, 5V, 5 mA
FET switch output12 V DC, 1A, switchable
Sensor supply outputs3 power sources, 2 mA fix, ICP®-compatible,Accuracy: 0,2%
Expanded no. of channelsExternal multiplexer for analog and digital outputs
Operating modesFrequency band analysis, transient memory, online classificati-on, trending
Measurement functionsTime signal, spectrum, integration of the spectrum, envelope,orbit, shock pulse, acceleration (RMS), vibration velocity(peak, RMS)
RAM memory capacity8 MB (optional 20 MB)
Flash-Memory capacity16 MB (optional 24 or 48 MB)
Ethernet interface1, Data rate: 10 Mbit
RS 232 interface2, data rate: 38,4 kBit
Power supply5,25 V (± 3%) / 3 A and 12 V (± 5%) /1,2 A
Dimensions (LxWxH )Approx. 26 x 13 x 15 cm /Approx.10.2 x 5.1 x 5.3 inch
Total weightApprox. 2,2 kg / 4 lb 13 oz.
Relative humidity10% to 100%, dew permitted
Operating temperature-20°C to + 70°C / -4°F to 158°F
Load, shock30g
Load, vibration2g constant accel. from 10 to 150 Hz
B3.3 ... B3.3h
ProduktblattProduct summary
Tele-Monitoring & -DiagnoseTele monitoring & diagnosis
VIBRONET®Signalmaster
©PR
ÜFT
ECH
NIK
Con
diti
on M
onit
orin
g | O
skar
-Mes
ster
-Str
. 19
-21
| D-8
5737
Ism
anin
g, D
euts
chla
nd |
Ver
sion
: 03
.06
PG-DSP Masseleitung für µC und DSPPG Masseleitung für Timer, IO's, IQ's...
PG-DSP und PG müssen extern über je2x0,5mm² verbunden werden.
AG Analog-Bezugsmasse
IO5-IO8 IN: TTL; OUT: 5V/ 5mA Sink and SourceOUT1-OUT4 OUT: 5V/ 5mA Sink and SourceP1, P2 IN: TTL, SchließerSY OUT: Signalmaster-SynchronisierungsausgangKP IN: TTL für Phasendetektoren12VSwitch OUT: 12V/ 1,0A
HiLo1-HiLo6 IN:±10V; ±1V; ±0,1V; ±0,01VIQ1-3 2mA/ 10kOhm
LAN: xxx Ethernet-LAN
PG-DSP Reference zero for µC and DSPPG Reference zero for Timer, IO's, IQ's...
PG-DSP and PG have to be connected via2x0,5mm² each.
AG Analog reference zero
IO5-IO8 IN: TTL; OUT: 5V/ 5mA Sink and SourceOUT1-OUT4 OUT: 5V/ 5mA Sink and SourceP1, P2 IN: TTL, CloserSY OUT: Signalmaster output for synchronisationKP IN: TTL for phase detectors12VSwitch OUT: 12V/ 1,0A
HiLo1-HiLo6 IN:±10V; ±1V; ±0,1V; ±0,01VIQ1-3 2mA/ 10kOhm
LAN: xxx Ethernet-LAN
Sub-D-Nr. Kanal
1 Hi32 Lo33 AG4 MUX-CLK5 12V6 PG7 SDM18 SDM29 SDM310 Hi411 Lo412 Hi113 Lo114 Hi215 Lo2
Anschlußbelegung für VIB 5.802 Connection plan for VIB 5.802
Systembus (Sub-D 15)
Sub-D-Nr. Channel
1 Hi32 Lo33 AG4 MUX-CLK5 12V6 PG7 SDM18 SDM29 SDM310 Hi411 Lo412 Hi113 Lo114 Hi215 Lo2
System bus (Sub-D 15)
Sub-D-Nr. Kanal
1 LAN:Tx+2 LAN:Tx-3 12V Switch4 5V5 IO56 IO67 Out18 Out29 P110 KP11 IQ112 Hi113 Hi214 Hi315 Hi416 Hi517 Hi6
Multifunktionsschnittstelle (Sub-D 50) / Multi functional interface (Sub-D 50)
Sub-D-Nr. Kanal
18 LAN:Rx+19 LAN:Rx-20 opt. 7,5V Batt.21 PG-DSP22 PG23 PG24 PG25 PG26 PG27 IQ228 Lo129 Lo230 Lo331 Lo432 Lo533 Lo6
Sub-D-Nr. Kanal
34 nc35 opt. 7,5V Switch36 12V37 PG-DSP38 IO739 IO840 Out341 Out442 P243 SY44 IQ345 AG46 AG47 AG48 AG49 AG50 AG
12VDC/15mA 12V GleichstromversorgungPG Bezugsmasse für die 12V-VersorgungAG Analog-BezugsmasseMUX-CLK4 Impuls zur KanalweiterschaltungSDM Adressleitung zur AnsteuerungHiLo Analog-Signalleitung
12VDC/15mA 12V dc current supplyPG Reference zero for the 12V supplyAG Analog reference zeroMUX-CLK4 Impulse for channel switchingSDM A-wire for triggeringHiLo Analog signal line
B 3.3dB3.3 ... B3.3h
ProduktblattProduct summary
©PR
ÜFT
ECH
NIK
Con
diti
on M
onit
orin
g | O
skar
-Mes
ster
-Str
. 19
-21
| D-8
5737
Ism
anin
g, D
euts
chla
nd |
Ver
sion
: 03
.06
B 3.3e
Strukturbild:VIBRONET Signalmaster, 1 ADC (VIB 5.902)
Structure:VIBRONET Signalmaster, 1 ADC (VIB 5.902)
3 Sensor-Speiseausgänge3 sensor supply outputs
6 differentielle oder12 massebezogene
Analogeingänge
6 differential or12 groundedanalog inputs
16 bitADC
MUX
Verstärker / Amplifier1,10,100,1000
2 Zählereingänge /2 counter inputs
4 digitale Ausgänge / 4 digital outputs
4 digitale Ein-Ausgänge / 4 digital in-outputs
IO 5IO 6IO 7IO 8
FETFET Schaltausgang /
FET switch output
Real time clock
Timer
Watchdog
TCP/IP
Webserver
eMail server
Firmware
Firmware kits
LED
Systembus
RS 232-2
RS 232-1
Ethernet Inter-/ Intranet, LAN,Funk-/ radio LAN, PC
PC, Modem, ISDN
Ext. Datengeräte/Ext. data instruments
Erweiterungsmodule/Extension modules
Statusanzeige/Status display
Option
Out 1Out 2Out 3Out 4
Counter 1
Counter 2
MC 133 MHzDSP
8 MB RAM(opt. 20)
16 MB Flash(opt. 24,48)
PCMCIA PCMCIA hard disc
B3.3 ... B3.3h
ProduktblattProduct summary
Tele-Monitoring & -DiagnoseTele monitoring & diagnosis
VIBRONET®Signalmaster
©PR
ÜFT
ECH
NIK
Con
diti
on M
onit
orin
g | O
skar
-Mes
ster
-Str
. 19
-21
| D-8
5737
Ism
anin
g, D
euts
chla
nd |
Ver
sion
: 03
.06
B 3.3f
Strukturbild:VIBRONET Signalmaster, 3 ADC (VIB 5.802)
Structure:VIBRONET Signalmaster, 3 ADC (VIB 5.802)
MC 133 MHzDSP
8 MB RAM(opt. 20)
16 MB Flash(opt. 24,48)
Real time clock
Timer
Watchdog
TCP/IP
Webserver
eMail server
Firmware
Firmware kits
LED
Systembus
RS 232-2
RS 232-1
Ethernet Inter-/ Intranet, LAN,Funk/ radio LAN, PC
PC, Modem, ISDN
Ext. DatengeräteExt data instruments
Erweiterungsmodule/Extension modules
Statusanzeige/Status display
Option
PCMCIA
3 Sensor-Speiseausgänge3 sensor supply
outputs
6 differentielle Analogeingänge(3 davon synchron),
oder 2 differentielle und8 massebezogene
Analogeingänge
6 differential analog inputs(3 of them synchronous)
or 2 differential and 8grounded analog intputs
16 bitADC
MUX
Verstärker / Amplifier1,10,100,1000
PCMCIA hard disc
2 Zählereingänge / 2 counter inputs
4 digitale Ausgänge / 4 digital outputs
Out 1Out 2Out 3Out 4
Counter 1
Counter 2
IO 5IO 6IO 7IO 8
FETFET Schaltausgang / FET switch output
4 dig. Ein-Ausgänge 4 dig. in-outputs
B3.3 ... B3.3h
ProduktblattProduct summary
©PR
ÜFT
ECH
NIK
Con
diti
on M
onit
orin
g | O
skar
-Mes
ster
-Str
. 19
-21
| D-8
5737
Ism
anin
g, D
euts
chla
nd |
Ver
sion
: 03
.06
Standard-Applikationen / Standard applications
VIBRONET® Signalmaster(VIB 5.902)
Modul(VIB 5.815-1)
Systembus(VIB 5.956-x)
Netzteil /Power supply(VIB 5.960-B)
VIBRONET® Multiplexer(VIB 8.306)
* mit Strom-LineDrive Ausgang / with current linedrive output
B 3.3g
Feld-Multiplexer mit 9 Kanälen
• Anschluß via Modul VIB 5.815-1 (1 Strom-LineDrive Eingang) bzw. VIB 5.815-3 (3Strom-LineDrive Eingänge)
• Maximal 6 Multiplexer* bei Ein-Kanal-Sig-nalmaster (VIB 5.902)Maximal 3x6 Multiplexer bei Drei-Kanal-Sig-nalmaster (VIB 5.802) mit maximal 108 Auf-nehmern.
• Lange Kabelstrecken zwischen Multiplexerund Signalmaster.
Field multiplexer with 9 channels• Connection via module VIB 5.815-1 (1 cur-
rent LineDrive input) or VIB 5.815-3 (3 cur-rent LineDrive inputs) respectively.
• Up to 6 multiplexers* can be connected tothe 1-channel Signalmaster (VIB 5.902)Up to 3x6 multiplexers can be connected tothe 3-channel Signalmaster (VIB 5.802) withup to 108 transducers.
• Long cabling between multiplexers and Sig-nalmaster.
VIBRONET® Signalmaster(VIB 5.902)
Multiplexer(VIB 5.818-N)
max. 16Sensoren
Netzteil /Power supply(VIB 5.960-B)
Anschlussmodul /Connection module
(z.B. VIB 5.816)
Systembus(VIB 5.956-x)Multiplexer mit 16 Kanälen
• Pro Multiplexer (z.B. VIB 5.818-N) Anschlußfür maximal 4 Anschlußmodule (z.B. 5.816)mit je 4 Aufnehmern*
• 8 Multiplexer pro VIBRONET Signalmaster.• Kurze Kabelstrecken zwischen Multiplexer
und Anschlußmodul.
Multiplexer with 16 channels• Up to 4 connection modules (e.g. VIB 5.816)
with 4 transducers* can be connected to amultiplexer (e.g. VIB 5.818-N).
• 8 multiplexers can be connected to theVIBRONET Signalmaster unit.
• Short cabling between multiplexers andconnection modules.
B3.3 ... B3.3h
ProduktblattProduct summary
Tele-Monitoring & -DiagnoseTele monitoring & diagnosis
VIBRONET®Signalmaster
©PR
ÜFT
ECH
NIK
Con
diti
on M
onit
orin
g | O
skar
-Mes
ster
-Str
. 19
-21
| D-8
5737
Ism
anin
g, D
euts
chla
nd |
Ver
sion
: 03
.06
B 3.3h
Standard-Applikationen (Forts.) / Standard applications (cont.)
VIBRONET® Signalmaster
VIB 5.816 /VIB 5.812-ICP
Netzteil /Power supply(VIB 5.960-B)
CLD / ICP®-Aufnehmer /CLD / ICP® transducer
Aufnehmer-Direktanschluß
• Anschluß von maximal 4 Beschleunigungs-aufnehmern pro Eingangskanal am VIBRO-NET® Signalmaster.
• Anschluß von Strom-LineDrive-(CLD)-Auf-nehmern mit Modul VIB 5.816.
• Anschluß von ICP®-Aufnehmern mit ModulVIB 5.812-ICP.
Transducers connected directly
• Up to 4 accelerometers per input channel.• Current LineDrive (CLD) accelelrometers are
connected via the VIB 5.816 module• ICP® accelerometers are connected via the
VIB 5.812-ICP module.
B3.3 ... B3.3h
ProduktblattProduct summary
Tele-Monitoring & -DiagnoseTele monitoring & diagnosis
VIBRONET®Signalmaster
©PR
ÜFT
ECH
NIK
Con
diti
on M
onit
orin
g | O
skar
-Mes
ster
-Str
. 19
-21
| D-8
5737
Ism
anin
g, D
euts
chla
nd |
Ver
sion
: 03
.06
B 3.4B3.4 ... B3.4a
VIB 5.815- 1/1Stoßimpulsmodul miteinem LineDrive-Eingang,Ausgang auf Differenzkanal 1
Shock pulse module withone LineDrive input, output signalon differential channel 1
AnwendungAnschluß von Feld-Multiplexern (VIB 8.306, 1String) oder Aufnehmern mit Strom-LineDrive-Ausgang am VIBRONET Signalmaster. In Ver-bindung mit 16-Kanal-Multiplexern (VIB 5.818/-19/-20) wird das Modul bei Stoßimpulsmes-sungen eingesetzt.
FunktionDie Umwandlung des Strom-LineDrive-Signalsvom Aufnehmer/ Multiplexer in ein Span-nungssignal für den VIBRONET Signalmastererfolgt über eine im Modul integrierte Strom-spiegelschaltung.
Das Modul verfügt über einen gepuffertenAnalogausgang (100mV/g), an dem der Signal-pegel über ein geeignetes Messgerät ange-zeigt werden kann. Die Anwahl der Messstelleerfolgt manuell über das optional erhältlicheDisplaymodul (VIB 5.985).
Die Steuersignale zur Kanalweiterschaltung er-hält das Modul über den Systembus vom VI-BRONET Signalmaster.
ApplicationThis module is used for connecting a string offield multiplexers (VIB 8.306) or transducerswith current line drive output to the VIBRONETSignalmaster. In conjunction with 16-channelmultiplexers (VIB 5.818 / -19 / -20), the modulecan be used in shock pulse measurements
FunctionThe current line drive signals from the trans-ducer/ multiplexer are converted into a voltagesignal for the VIBRONET Signalmaster by acurrent mirror circuit integrated in the module.
The module has a buffered analog output (100mV/g), at which the transducer signal can bedisplayed using a suitable measuring device.The measuring location is selected via theoptionally available display module (VIB5.985).
The module obtains the control signals forfurther channel switching via the system busfrom the VIBRONET Signalmaster.
100mV/g
Line Drive
Ser.
No.
95
03
95
0
SP
M B
US
SY
ST
EM
BU
S
LineDriveinput
100mV/goutput
SPM-Bus
System-Bus
VIB 5.815 - 1/2 -, Ausgang auf Differenzkanal 2 -, output signal on differential ch. 2
VIB 5.815 - 1/3 -, Ausgang auf Differenzkanal 3 -, output signal on differential ch. 3
VIB 5.802: VIBRONET Signalmaster,3 Kanäle / 3 channels
VIB 5.902: VIBRONET Signalmaster,1 Kanal / 1 channel
VIB 5.815-1/1
VIB 5.815-1/2
VIB 5.815-1/3
VIB 5.815-1/1
AD1
AD2
AD3
AD1
ProduktblattProduct summary
©PR
ÜFT
ECH
NIK
Con
diti
on M
onit
orin
g | O
skar
-Mes
ster
-Str
. 19
-21
| D-8
5737
Ism
anin
g, D
euts
chla
nd |
Ver
sion
: 03
.06
B 3.4aB3.4 ... B3.4a
Technische Daten: VIB 5.815-1
Eingänge 1 LineDrive (Multiplexer-) String
Anschlußmöglichkeiten bis zu 6 Multiplexer bzw.maximal 108 Kanäle bei VIB 5.802
Galvanische Trennung Nein
Eingänge 1 x TNC; SPM-Bus
Ausgänge Systembus & 1 x BNC(100mV/g, bezogen auf 1µA-Sensor)
Versorgungspannung 12 VDC, Systembus
Stromaufnahme < 250 mA
Steuereingang Systembus
Detektion von über DC-Messung, > 5,5VLeitungskurzschluß
Detektion von über DC-Messung, < 500 mVoffener Leitung
Strombegrenzung jabei Sensor-Kurzschluß
Arbeitstemperatur 0...50°C
Abmessungen 130 x 240 x 35 mm (HxBxT)
Gehäusematerial Aluminium
Montage (Option) Adapter für Tragschienen (NS35/15)
Technical data: VIB 5.815-1
Inputs 1 LineDrive (multiplexer) string
Connections up to 6 multiplexer orup to 108 channels for VIB 5.802
Electrically isolated No
Inputs 1 x TNC; SPM bus
Outputs System bus & 1 x BNC(100mV/g, refered to 1µA sensor)
Power supply 12 VDC from system bus
Current consumption < 250 mA
Control input System bus
Detection of with DC measurement, > 5,5Vshort circuit
Detection of with DC measurement, < 500 mVopen circuit
Current limitation yes(sensor short circuit)
Operating temp. 0...50°C
Dimensions 130 x 240 x 35 mm (HxWxD)
Case material Aluminum
Mounting (option) Adapter for top hat rail (NS35/15)
Anwendungsbeispiele
1. Stoßimpulsmessung: 16-Kanal-Multiplexer & CLD*-Aufnehmer2. Anschluß von Feld-Multiplexern mit Strom-Ausgang
Application examples
1. 16-channel multiplexer & CLD* transducer (shock pulse meas.)2. Field multiplexer with CLD output
1 2VIBRONET®
SignalmasterVIB 5.815-1/1 Systembus
Netzteil /Power supply(VIB 5.960-B)
max. 6 Multiplexer (VIB 8.306)
LineDriveinput
VIBRONET® SignalmasterSystembus(VIB 5.956-x)
Multiplexer(VIB 5.818-N)
max. 16 CLD*-Aufnehmer/ CLD* transducers
Anschlussmodul /Connection module
(z.B. VIB 5.816)
SPM-Bus
VIB 5.815-1/1
Netzteil /Power supply(VIB 5.960-B)
*CLD: Current LineDrive Aufnehmer mit Stromausgang)
ProduktblattProduct summary
Tele-Monitoring & -DiagnoseTele monitoring & diagnosis
VIBRONET®Signalmaster
©PR
ÜFT
ECH
NIK
Con
diti
on M
onit
orin
g | O
skar
-Mes
ster
-Str
. 19
-21
| D-8
5737
Ism
anin
g, D
euts
chla
nd |
Ver
sion
: 03
.06
AnwendungAnschluß von Feld-Multiplexern (VIB 8.306,max. 3 Strings) oder Aufnehmern mit Strom-LineDrive-Ausgang am VIBRONET Signalmas-ter. In Verbindung mit 16-Kanal-Multiplexern(VIB 5.818/-19/-20) wird das Modul bei Stoßim-pulsmessungen eingesetzt.
FunktionDie Umwandlung des Strom-LineDrive-Signalsvom Aufnehmer/ Multiplexer in ein Span-nungssignal für den VIBRONET Signalmastererfolgt über eine im Modul integrierte Strom-spiegelschaltung.
Das Modul verfügt über einen gepuffertenAnalogausgang (100mV/g), an dem der Signal-pegel über ein geeignetes Messgerät ange-zeigt werden kann. Die Anwahl der Messstelleerfolgt manuell über das optional erhältlicheDisplaymodul (VIB 5.985).
Die Steuersignale zur Kanalweiterschaltung er-hält das Modul über den Systembus vom VI-BRONET Signalmaster.
ApplicationThis module is used for connecting up to 3strings of field multiplexers (VIB 8.306) ortransducers with current line drive output tothe VIBRONET Signalmaster. In conjunctionwith 16-channel multiplexers (VIB 5.818 / -19 / -20), the module can be used in shock pulsemeasurements
FunctionThe current line drive signals from the trans-ducer/ multiplexer are converted into a voltagesignal for the VIBRONET Signalmaster by acurrent mirror circuit integrated in the module.
The module has a buffered analog output (100mV/g), at which the transducer signal can bedisplayed using a suitable measuring device.The measuring location is selected via theoptionally available display module (VIB 5.985)
The module obtains the control signals forfurther channel switching via the system busfrom the VIBRONET Signalmaster.
LineDrive input 1-3
SP
M B
US
SY
ST
EM
BU
S
Str
ing
1S
trin
g 2
Str
ing
3
100m V/g
100mV/goutput
System-BusSPM-Bus
VIB 5.815-3 Stoßimpulsmodul mitdrei LineDrive-Eingängen
Shock pulse module withthree LineDrive inputs
VIBRONET Signalmaster(VIB 5.802 / VIB 5.902)
VIB 5.815-3
AD 1
LineDrive1-3
B 3.5B3.5 ... B3.5a
ProduktblattProduct summary
©PR
ÜFT
ECH
NIK
Con
diti
on M
onit
orin
g | O
skar
-Mes
ster
-Str
. 19
-21
| D-8
5737
Ism
anin
g, D
euts
chla
nd |
Ver
sion
: 03
.06
B 3.5a
Technische Daten: VIB 5.815-3
Eingänge 3 LineDrive (Multiplexer-) Strings
Anschlußmöglichkeiten bis zu 6 Multiplexer pro String bzw.bis zu 108 Kanäle insgesamt
Galvanische Trennung Nein
Eingänge 3 x TNC; SPM-Bus
Ausgänge Systembus & 1 x BNC(100mV/g, bezogen auf 1µA-Sensor)
Versorgungspannung 12 VDC, Systembus
Stromaufnahme < 250 mA
Steuereingang Systembus
Detektion von über DC-Messung, > 5,5VLeitungskurzschluß
Detektion von über DC-Messung, < 500 mVoffener Leitung
Strombegrenzung jabei Sensor-Kurzschluß
Arbeitstemperatur 0...50°C
Abmessungen 130 x 240 x 70 mm (HxBxT)
Gehäusematerial Aluminium
Montage (Option) Adapter für Tragschienen (NS35/15)
Technical data: VIB 5.815-3
Inputs 3 LineDrive (multiplexer) strings
Connections up to 6 multiplexer per string orup to 108 channels altogether
Electrically isolated No
Inputs 3 x TNC; SPM bus
Outputs System bus & 1 x BNC(100mV/g, refered to 1µA sensor)
Power supply 12 VDC from system bus
Current consumption < 250 mA
Control input System bus
Detection of with DC measurement, > 5,5Vshort circuit
Detection of with DC measurement, < 500 mVopen circuit
Current limitation yes(sensor short circuit)
Operating temperature 0...50°C
Dimensions 130 x 240 x 70 mm (HxWxD)
Case material Aluminum
Mounting (option) Adapter for top hat rail (NS35/15)
VIBRONET®
SignalmasterVIB 5.815-3 Systembus
Netzteil /Power supply(VIB 5.960-B)
max. 6 Multiplexer (VIB 8.306) / string
LineDriveinput
*CLD: Current LineDrive Aufnehmer mit Stromausgang)
VIBRONET® Signalmaster(VIB 5.902)
Systembus(VIB 5.956-x)
Multiplexer(VIB 5.818-N)
max. 16 CLD*-Aufnehmer/ CLD* transducers
SPM-Bus
VIB 5.815-3
Netzteil /Power supply(VIB 5.960-B)
Anschlussmodul /Connection module
(z.B. VIB 5.816)
Anwendungsbeispiele
1. Stoßimpulsmessung: 16-Kanal-Multiplexer & CLD*-Aufnehmer2. Anschluß von Feld-Multiplexern mit Strom-Ausgang
Application examples
1. 16-channel multiplexer & CLD* transducer (shock pulse meas.)2. Field multiplexer with CLD output
1 2
B3.5 ... B3.5a
ProduktblattProduct summary
Tele-Monitoring & -DiagnoseTele monitoring & diagnosis
VIBRONET®Signalmaster
©PR
ÜFT
ECH
NIK
Con
diti
on M
onit
orin
g | O
skar
-Mes
ster
-Str
. 19
-21
| D-8
5737
Ism
anin
g, D
euts
chla
nd |
Ver
sion
: 03
.06
B 3.6B3.6 ... B3.6a
AnwendungBereitstellung von Relais-Ausgängen an ei-nem VIBRONET Signalmaster System.
FunktionDas Ausgangsmodul verfügt über eine LEDAnzeige und zwei unabhängige Wechselre-lais, die jeweils über einen Digitalausgang desVIBRONET Signalmasters angesteuert werdenkönnen.
Technische Daten: VIB 5.917
Anzahl Relais-Ausgänge 2Versorgungsspannung 12 VDCMax. Versorgungsstrom 50 mADauerstrom d. Relaiskontaktes max. 5 ASpannung am Relaiskontakt max. 50 VLeistung max. 20 WPrellzeit des Relaiskontaktes 5msIsolationswiderstand 1010 Ohm (bei 500 V)Spannungsfestigkeitzw. Kontakt und Spule 750V-Anzahl Schaltspiele 2x108
Betriebstemperatur -40°C bis +85°CBelastbarkeit Stoß 30g Schwingung 2g Konstantbeschleunigung bei
10 bis 150Hz
Anschluss Schraubanschluss, feindrähtig2,5 mm² AWG 12, eindrähtig 4mm² AWG 12
Anzugsdrehmoment 0,5 - 1,0 NmMontage Tragschiene TS35Abmessungen 50 x 125 x 55 mm (LxBxH)Gehäusematerial PolyamidGewicht 100 g
Ausgangsmodul mit zweiWechselrelais-AusgängenVIB 5.917 Output module with
two SPDT relays
ApplicationProvides relay outputs on a VIBRONET Signal-master system.
FunctionThe output module has an LED display and twoindependent SPDT relays that can each becontrolled by a digital output of the VIBRONETSignalmaster.
Technical data: VIB 5.917
Number of relay outputs 2Supply voltage 12 VDCMax. supply current 50 mAPermanent currentof relay contact Max. 5 AVoltage at relay contact Max. 50 VPower Max. 20 WBounce time of relay contact 5msInsulation resistance 1010 Ohm (at 500 V)Voltage endurancebetween contact and coil 750V-Number of switching cycles 2x108
Operating temperature -40°C to +85°CLoad Shock 30g Vibration 2g constant acceleration at 10 to
150Hz
Connection Screw connection,Fine wire 2.5 mm² AWG 12,Single wire 4 mm² AWG 12
Tightening torque 0.5 - 1.0 NmMounting Supporting rail TS35Dimensions 50 x 125 x 55 mm (LxBxH)Housing material PolyamideWeight 100 g
ProduktblattProduct summary
©PR
ÜFT
ECH
NIK
Con
diti
on M
onit
orin
g | O
skar
-Mes
ster
-Str
. 19
-21
| D-8
5737
Ism
anin
g, D
euts
chla
nd |
Ver
sion
: 03
.06
B 3.6aB3.6 ... B3.6a
Klemmenbelegung: VIB 5.917
1 12V2 PG3 SW14 SW25 Öffner16 COM17 COM18 Schließer19 Öffner210 COM211 COM212 Schließer2
Connection plan: VIB 5.917
1 12V2 PG3 SW14 SW25 Öffner16 COM17 COM18 Schließer19 Öffner210 COM211 COM212 Schließer2
12VDC/60mA 12V GleichstromversorgungPG Bezugsmasse für die 12V-VersorgungSW Steuereingang für Relais (5-24V)Öffner Öffner des WechselkontaktesCOM Wurzel des WechselkontaktesSchließer Schließer des Wechselkontaktes
12VDC/60mA 12V dc current supplyPG Reference zero for the 12V supplySW Control input for relay (5-24V)Öffner Opener of the change-over contactCOM Root of the change-over contactSchließer Closer of the change-over contact
ProduktblattProduct summary
Tele-Monitoring & -DiagnoseTele monitoring & diagnosis
VIBRONET®Signalmaster
©PR
ÜFT
ECH
NIK
Con
diti
on M
onit
orin
g | O
skar
-Mes
ster
-Str
. 19
-21
| D-8
5737
Ism
anin
g, D
euts
chla
nd |
Ver
sion
: 03
.06
B 3.7
VIB 5.985 Displaymodul für Display module forVIBRONET Signalmaster VIBRONET Signalmaster
AnwendungDas Displaymodul (VIB 5.985) wird optional zurBedienung des VIBRONET Signalmaster Sy-stems vor Ort eingesetzt. Das Modul ist in derTür des Wandschaltschrankes integriert undverfügt über ein LCD-Textdisplay und 8 Tasten.
Über die Tastatur lassen sich ...
• Aufnehmer auswählen• Messfunktionen starten• Log-Buch abfragen (z.B. Fehlermeldungen)• Online-Messwerte anzeigen
AnschlußDas Displaymodul wird an der zweiten seriel-len Schnittstelle (RS232-2) der VIBRONET Sig-nalmaster Basiseinheit angeschlossen.
HinweisWenn das Display-Modul eingesetzt wird,steht keine serielle Schnittstelle (RS232) für dieAnkopplung an Feldbussysteme (ModBUS,Profibus) zur Verfügung.
Technische DatenVersorgungsspannung 12 VDC
Maximale Stromaufnahme 50 mA
SIGNALMASTER
VIBRONET R
RE-START
LOG-BOOK
STOP
LIGHTRE-START
LOG-BOOK
STOP
LIGHT
ApplicationThe optional display module (VIB 5.985) is usedfor the operation of the VIBRONET Signalmas-ter systems on site. The module is integrated inthe door of the wall connection box and hasan LCD text display and 8 keys.
The keyboard can be used to ...
• Select transducers• Start measurement functions• Request the logbook (e.g. error messages)• Display online measured values
ConnectionThe display module is connected to the secondserial interface (RS232-2) of the VIBRONETSignalmaster base unit.
NoteIf the display module is used, no serial interface(RS232) is available for connecting to the fieldbus systems (ModBUS, Profibus).
Technical dataSupply voltage 12 VDC
Max. current consumption 50 mA
ProduktblattProduct summary
Tele-Monitoring & -DiagnoseTele monitoring & diagnosis
VIBRONET®Signalmaster
©PR
ÜFT
ECH
NIK
Con
diti
on M
onit
orin
g | O
skar
-Mes
ster
-Str
. 19
-21
| D-8
5737
Ism
anin
g, D
euts
chla
nd |
Ver
sion
: 03
.06
B 3.8
AnwendungMit dem Patchkabel (VIB 5.955-X) wird derVIBRONET Signalmaster an ein Netzwerk an-geschlossen - entweder direkt, über einen Huboder über einen Router.Das gekreuzte Ethernetkabel (VIB 5.957-X)wird verwendet, um den VIBRONET Signalmas-ter direkt an den PC anzuschließen.
VIB 5.957-2 Gekreuztes Ethernet-Kabel, 2m Twisted-pair cable, 2 meter
VIB 5.957-5 -, 5 Meter -, 5 meter
Patchkabel fürVIBRONET Signalmaster, X* mVIB 5.955-X
VIB 5.955-2
VIB 5.957-2crossed
VIBRONET Signalmaster
VIB 5.957-5
VIB 5.955-X VIB 5.955-X
LAN
Patch cable forVIBRONET Signalmaster, X*m
ApplicationThe patch cable (VIB 5.955-X) is used to con-nect the VIBRONET Signalmaster to a network- either directly, via a hub or via a router.The twisted-pair cable (VIB 5.957-X) is used toconnect the VIBRONET Signalmaster directly tothe PC.
*X = 2,5,10,30 m
B3.8 ... B3.8a
ProduktblattProduct summary
©PR
ÜFT
ECH
NIK
Con
diti
on M
onit
orin
g | O
skar
-Mes
ster
-Str
. 19
-21
| D-8
5737
Ism
anin
g, D
euts
chla
nd |
Ver
sion
: 03
.06
B 3.8aB3.8 ... B3.8a
Technische DatenLeiter 0,52 mm Cu blk AWG24Aderisolation PE, Farbfolge nach IEC 708Verseilung 4 Paare verseiltSchirmung Alu-VerbundfolieErdleiter 0,5 mm Cu vznLeiterwiderstand max. 94 Ohm/kmSchleifenwiderstand 188 OhmWellenwiderstand 100 Ohm ±15%Mantel VIB 5.955-X* FR-PVC,grau (flammwidrig) VIB 5.957-X* FR-LS0H, gelb (flammwidrig, raucharm,
halogenfrei)Außendurchmesser 6,3 mmTemperaturbereich Verlegung -5°C bis +50°C Betrieb -30°C bis +70°CVIB 5.957-X*
Ausführung VIB 5.955-X*:FTP-Patchkabel, geschirmtCategory 5 - 100 Mbit/sBelegung nach EIA/TIA 5684 x 2 x AWG 24/7RJ 45-Stecker mit angespritzter Kabeltülle
*X = Kabellänge in Meter (X = 2, 5, 10, 30 m)
Ausführung - VIB 5.957-X*:S/FTP Cross-Over-Kabel, doppelt geschirmtCategory 5 - 100 Mbit/sCross-Over-Belegung4 x 2 x AWG 26/7RJ 45-'HIROSE'-Stecker, gelb
*X = Kabellänge in Meter (X = 2, 5 m)
Pin-Belegung fürgekreuztes Ethernetkabel (VIB 5.957-x):
1 - 32 - 63 - 14 - 75 - 86 - 27 - 48 - 5
Technical dataWire 0.52 mm Cu blk AWG24Wire insulation PE, color coding acc. to IEC 708Formation 4 pairs, twistedShielding Aluminum compound foilEarth lead 0.5 mm Cu, zinc-platedConductor resistance Max. 94 Ohm/km
Loop resistance 188 OhmCharact. impedance 100 Ohm ±15%Sheath VIB 5.955-X* FR-PVC, gray (flame resistant) VIB 5.957-X* FR-LS0H, yellow (flame resistant, low
smoke, halogen-free)External diameter 6.3 mmTemperature range Laying -5°C to +50°C Operation -30°C to +70°CVIB 5.957-X*
Model VIB 5.955-X*:FTP patch cable, shieldedCategory 5 - 100 Mbit/sAllocation acc. to EIA/TIA 5684 x 2 x AWG 24/7RJ 45 connector with sprayed on cable sleeve
*X = cable length in meters (X = 2, 5, 10, 30 m)
Model - VIB 5.957-X*:S/FTP crossover cable, double shieldedCategory 5 - 100 Mbit/sCrossover allocation4 x 2 x AWG 26/7RJ 45-'HIROSE' connector, yellow
*X = cable length in meters (X = 2, 5 m)
Pin allocation fortwisted-pair cable (VIB 5.957-x):
1 - 32 - 63 - 14 - 75 - 86 - 27 - 48 - 5
1 2 3 4 5 6 7 8
ProduktblattProduct summary
Tele-Monitoring & -DiagnoseTele monitoring & diagnosis
VIBRONET®Signalmaster
©PR
ÜFT
ECH
NIK
Con
diti
on M
onit
orin
g | O
skar
-Mes
ster
-Str
. 19
-21
| D-8
5737
Ism
anin
g, D
euts
chla
nd |
Ver
sion
: 03
.06
Systembuskabel mitX* AnschlußsteckernVIB 5.956-X*
VIB 5.956-3
AnwendungAnschluß der Multiplexer und Erweiterungs-module an den VIBRONET Signalmaster zurÜbertragung der analogen und digitalenMess- und Steuersignale.
BeschreibungDas Systembuskabel ist ein 15-adriges Flach-bandkabel, in dem im Abstand von etwa 50 cm15-polige Sub-D-Stecker zum Anschluß der Sys-temkomponenten angebracht sind.
Je nach Modul werden unterschiedliche Pinsam Systembus angeschlossen.
Zur Erweiterung eines bestehenden System-bus' ist ein Systembuskabel mit der entspre-chenden Anzahl von Anschlußsteckern erfor-derlich.
VIBRONETSignalmaster
VIB 5.956-x*
*X = 2...7
System bus cablewith x* connectors
ApplicationConnection of the multiplexers and add-onmodules to the VIBRONET Signalmaster for thetransmission of analog and digital measure-ment and control signals.
DescriptionThe system bus cable is a 15-wire ribbon cableof approx. 50 cm with a 15-pole Sub-D connec-tor attached for connecting system compo-nents.
Depending on the module, different pins areconnected to the system bus.
The expansion of an existing system bus re-quires a system bus cable with the relevantnumber of connectors.
B 3.9B3.9 ... B3.9a
ProduktblattProduct summary
©PR
ÜFT
ECH
NIK
Con
diti
on M
onit
orin
g | O
skar
-Mes
ster
-Str
. 19
-21
| D-8
5737
Ism
anin
g, D
euts
chla
nd |
Ver
sion
: 03
.06
Systembuskabel: Pin-Belegung
15 pin, female 15 pin, female 15 pin, female
System bus cable: Pin allocation
B 3.9a
12VDC/15mA 12V GleichstromversorgungPG Bezugsmasse für die 12V-VersorgungAG Analog-BezugsmasseMUX-CLK Impuls zur KanalweiterschaltungSDM Adressleitung zur AnsteuerungHiLo Analog-Signalleitung
12VDC/15mA 12V dc current supplyPG Reference zero for the 12V supplyAG Analog reference zeroMUX-CLK Impulse for channel switchingSDM A-wire for triggeringHiLo Analog signal line
Sub-D-Nr. Kanal
1 Hi32 Lo33 AG4 MUX-CLK5 12V6 PG7 SDM18 SDM29 SDM310 AG11 AG12 Hi113 Lo114 Hi215 Lo2
Systembus (Sub-D 15)
Sub-D-Nr. Channel
1 Hi32 Lo33 AG4 MUX-CLK5 12V6 PG7 SDM18 SDM29 SDM310 AG11 AG12 Hi113 Lo114 Hi215 Lo2
System bus (Sub-D 15)
B3.9 ... B3.9a
ProduktblattProduct summary
Tele-Monitoring & -DiagnoseTele monitoring & diagnosis
VIBRONET®Signalmaster
©PR
ÜFT
ECH
NIK
Con
diti
on M
onit
orin
g | O
skar
-Mes
ster
-Str
. 19
-21
| D-8
5737
Ism
anin
g, D
euts
chla
nd |
Ver
sion
: 03
.06
Schaltnetzteil fürVIBRONET SignalmasterVIB 5.960 - B
VIB 5.960 - B60 Schaltnetzteil für VIBRONET Power supply for VIBRONETSignalmaster (max. 60°C) Signalmaster (max. 60°C / 140°F)
AnwendungSpannungsversorgung der VIBRONET Signal-master-Basiseinheit bei Umgebungstempera-turen bis 50°C (VIB 5.960-B), bzw. bis 60°C (VIB5.960-B60).
FunktionDas Netzteil verfügt über drei Spannungsaus-gänge (5VDC /±12VDC).
HinweiseZur einfachen Montage ist am Netzteil einHutschienenadapter für Tragschienen TS35x16 angebracht.Beim Betrieb mit 115 VAC muß eine Leistungs-reduktion von 10-15% berücksichtigt werden.
Technische DatenEingangsspannung 85V - 264VAC / 50-60Hz
Eingangsstrom 0.70A (bei 115VAC)0.48A (bei 230VAC)
Ausgang +5,3 VDC / 4.0A (Ausgang 1, isoliert)+12 VDC / 1.2A (Ausgang 2)-12 VDC / 0.6A (Ausgang 3)
Leistung 36 W
BetriebstemperaturVIB 5.960-B -10°C ... +50°CVIB 5.960-B60 -10°C ... +60°C
Abmessungen ca. 16 x 9 x 4 cm (LxBxH)
ApplicationPower supply for the VIBRONET Signalmasterbase unit at ambient temperatures up to 50°C(VIB 5.960-B), or up to 60°C (VIB 5.960-B60).
FunctionThe power supply has three voltage outputs(5VDC /±12VDC).
NotesA top hat rail adapter for supporting rails TS35x16 is provided on the power supply forsimple assembly.When operating with 115 VAC, a power reduc-tion of 10-15% must be reckoned with.
Technical dataInput voltage 85V - 264VAC / 50-60Hz
Input current 0.70A (at 115VAC)0.48A (at 230VAC)
Output +5,3 VDC / 4.0A (output 1, floating)+12 VDC / 1.2A (output 2)-12 VDC / 0.6A (output 3)
Power 36 W
Operating temperatureVIB 5.960-B -10°C ... +50°C / 14°F ... 122°FVIB 5.960-B60 -10°C ... +60°C / 14°F ... 140°F
Dimensions Approx. 16 x 9 x 4 cm (LxWxH)Approx. 6.3 x 3.5 x 1.5 inch
VIB 5.960-B
VIB 5.960-B60
VIBRONET Signalmaster
Power supply forVIBRONET Signalmaster
B 3.10B3.10 ... B3.10a
ProduktblattProduct summary
©PR
ÜFT
ECH
NIK
Con
diti
on M
onit
orin
g | O
skar
-Mes
ster
-Str
. 19
-21
| D-8
5737
Ism
anin
g, D
euts
chla
nd |
Ver
sion
: 03
.06
B 3.10a
Anschlußklemmplan fürSchaltnetzteile - VIB 5.960-B / VIB 5.960-B60
Connection plan forpower supply - VIB 5.960-B / VIB 5.960-B60
B3.10 ... B3.10a
ProduktblattProduct summary
Tele-Monitoring & -DiagnoseTele monitoring & diagnosis
VIBRONET®Signalmaster
©PR
ÜFT
ECH
NIK
Con
diti
on M
onit
orin
g | O
skar
-Mes
ster
-Str
. 19
-21
| D-8
5737
Ism
anin
g, D
euts
chla
nd |
Ver
sion
: 03
.06
Schaltnetzteil für VIBRONETSignalmaster mit 24V / 1,5 A VIB 5.964-1,5
VIB 5.964 - 2,5 -, mit 24 V / 2,5 A -, with 24 V / 2,5 A
VIB 5.964 - 5 -, mit 24 V / 5 A -, with 24 V / 5 A
VIB 5.964-1,5
VIB 5.964-1,5
VIBRONET Signalmaster
AnwendungDas Netzteil wird zur Versorgung von 24-V-Geräten mit maximal 1,5 / 2,5 / 5 A Stromauf-nahme im VIBRONET Signalmaster-Systemseingesetzt.Durch den weiten Eingangsspannungsbereichvon 85 bis 235 Volt AC sind sie für denweltweiten Einsatz geeignet.
FunktionDas Netzteil verfügt über einen Spannungs-ausgang (+24 VDC). Werden -24 VDC benötigt,wird der Ausgang verpolt abgegriffen.
HinweiseZur einfachen Montage ist am Netzteil einHutschienenadapter für Tragschienen TS35x16 angebracht.Liegt die Umgebungstemperatur über 50°C,muss dass Netzteil mit etwa der doppeltenLeistung ausgelegt werden, da die Netzteile ab50°C eine Leistungsreduktion von 5% pro °Chaben. Desweiteren muß beim Betrieb mit 115VAC eine Leistungsreduktion von 10-15% be-rücksichtigt werden.
Poweer supply for VIBRONETSignalmaster, 24V / 1,5 A
ApplicationThe power supply is used for the power supplyof 24 V devices with a maximum of 1.5 / 2.5 /5 A current consumption in the VIBRONETSignalmaster system.Due to the wide input voltage range of 85 to235 volt AC, they are suitable for use aroundthe world.
FunctionThe power supply has a voltage output (+24VDC). If -24 VDC are required, the output mustbe reverse connected.
NotesA top hat rail adapter for supporting rails TS35x16 is provided on the power supply forsimple assembly.If the ambient temperature is above 50°C, thepower supply must be designed with approx.double the power because power supplies aresubject to a power reduction of 5% for each °Cabove 50°C. Furthermore, for operation with115 VAC, a power reduction of 10-15% mustbe reckoned with.
B 3.11B3.11 ... B3.11a
ProduktblattProduct summary
©PR
ÜFT
ECH
NIK
Con
diti
on M
onit
orin
g | O
skar
-Mes
ster
-Str
. 19
-21
| D-8
5737
Ism
anin
g, D
euts
chla
nd |
Ver
sion
: 03
.06
Technische Daten: VIB 5.964-x
Eingangsspannung 85V - 264VAC / 50-60Hz
Eingangsstrom VIB 5.964-1,5 0.7A (115VAC) / 0.48A (230VAC) VIB 5.964-2,5 1,2A (115VAC) / 0.75A (230VAC)
Einschaltstrom VIB 5.964-5 10 A (115 VAC) / 25 A (230 VAC)
Ausgang VIB 5.964-1,5 24 VDC / 1,5 A VIB 5.964-2,5 24 VDC / 2,5 A VIB 5.964-5 24 VDC / 5 A
Leistung VIB 5.964-1,5 36 W VIB 5.964-2,5 60 W VIB 5.964-5 120 W
Betriebstemperatur -10°C ... +60°C
Abmessungen (LxBxH) VIB 5.964-1,5 ca. 139 x 79 x 33 mm VIB 5.964-2,5 ca. 179 x 79 x 33 mm VIB 5.964-5 ca. 213 x 111 x 39 mm
Anschlüsse Schraubklemmen
Technical data: VIB 5.964-x
Input voltage 85V - 264VAC / 50-60Hz
Input current VIB 5.964-1,5 0.7A (115VAC) / 0.48A (230VAC) VIB 5.964-2,5 1.2A (115VAC) / 0.75A (230VAC)
Switch-on peak VIB 5.964-5 10 A (115 VAC) / 25 A (230 VAC)
Output VIB 5.964-1,5 24 VDC / 1.5 A VIB 5.964-2,5 24 VDC / 2.5 A VIB 5.964-5 24 VDC / 5 A
Power VIB 5.964-1,5 36 W VIB 5.964-2,5 60 W VIB 5.964-5 120 W
Operating temp. -10°C ... +60°C
Dimensions (LxBxH) VIB 5.964-1,5 Approx. 139 x 79 x 33 mm VIB 5.964-2,5 Approx. 179 x 79 x 33 mm VIB 5.964-5 Approx. 213 x 111 x 39 mm
Connections Screw terminals
B 3.11a
Anschlußklemmplan fürSchaltnetzteile - VIB 5.964-1,5/ VIB 5.964-2,5
Connection plan forpower supply - VIB 5.964-1,5/ VIB 5.964-2,5
Anschlußklemmplan fürSchaltnetzteil - VIB 5.964-5
Connection plan forpower supply - VIB 5.964-5
B3.11 ... B3.11a
ProduktblattProduct summary
Tele-Monitoring & -DiagnoseTele monitoring & diagnosis
VIBRONET®Signalmaster
©PR
ÜFT
ECH
NIK
Con
diti
on M
onit
orin
g | O
skar
-Mes
ster
-Str
. 19
-21
| D-8
5737
Ism
anin
g, D
euts
chla
nd |
Ver
sion
: 03
.06
Kommunikationsbox füranaloge TelefonanlageVIB 5.896-ANA
AnwendungHerstellung der Kommunikation über Telefon-leitung (analog/ ISDN) oder verteilte Datennet-ze (Internet/ LAN).
BeschreibungIn dem industrietauglichen Metall-Schutz-schrank sind alle zur Kommunikation notwen-digen Komponenten auf C-Schienen montiert:
- Modem- Hub- Internet Anschlußmodul
Der Anschluß an eine Telefonleitung bzw. andas Ethernet (LAN) erfolgt über die bereitsvormontierten Blockklemmen.
Communication box foranalog telephone system
ApplicationFor establishing communication via a telepho-ne line (analog/ ISDN) or distributed datanetworks (Internet/ LAN).
DescriptionAll components necessary for communicationare mounted on top-hat rails in the protectivemetal cabinet suitable for the industrial envi-ronment:
- Modem- Hub- Internet connecting module
The connection to a telephone line or to theEthernet (LAN) is made via the pre-assembledterminal blocks.
B 3.12B3.12 ... B3.12a
1 2 3 4 5Power
RECEIVE
LINK
PARTITION
Collision
HubVIB 5.959
Modem, analog - VIB 5.931Modem, ISDN - VIB 5.932
SIGNALMASTER
VIBRONET R
RE-START
LOG-BOOKSTOP
LIGHT
Internetconnection module
VIB 5.930
VIBRONETSignalmaster
Komm. boxVIB 5.896
LAN
VIB 5.896 - ISD -, ISDN Telefonanlage -, ISDN telephone system
ProduktblattProduct summary
©PR
ÜFT
ECH
NIK
Con
diti
on M
onit
orin
g | O
skar
-Mes
ster
-Str
. 19
-21
| D-8
5737
Ism
anin
g, D
euts
chla
nd |
Ver
sion
: 03
.06
B 3.12aB3.12 ... B3.12a
300 / 11 4/5"
VIBRONET Signalmaster Communication box - VIB 5.896
420
130 / 5 1/8"260 / 10 1/4"
Ø 81/3"
400 /15 3/4"
Technische Daten
Material St. 12.03, Korpus 1,5mm, Tür 1,5mm,
Erdung in Korpus und Tür
Dichtung eingeschäumt (mit geschlossener Außenhaut)
Scharniere wechselbarer Anschlag (ca. 140° Öffnung)
Oberflächenschutz Eisenphosphatiert und pulverlackiert
Schutzart IP 55
Abmessungen:
Technical data
Material Steel 12.03, body 1.5mm, door 1.5mm
Grounding In body and door
Sealing Foamed (with a closed external surface)
Hinges Changeable stop (approx. 140° opening)
Surface protection Iron phosphated and powder coated
Protection class IP 55
Dimensions:
ProduktblattProduct summary
Tele-Monitoring & -DiagnoseTele monitoring & diagnosis
VIBRONET®Signalmaster
©PR
ÜFT
ECH
NIK
Con
diti
on M
onit
orin
g | O
skar
-Mes
ster
-Str
. 19
-21
| D-8
5737
Ism
anin
g, D
euts
chla
nd |
Ver
sion
: 03
.06
AlarmboxVIB 5.897
AnwendungBereitstellung von bis zu 16 zusätzlicher digita-ler Ausgänge zur Signalisierung/ Verarbeitungvon Alarmzuständen über Prozessleitsystemeoder programmierbare Steuerungen.
BeschreibungDas Erweiterungsmodul (VIB 5.910) ist in ei-nem stabilen Schaltschrank montiert und mitdem Systembus und den Anschlußklemmenverkabelt. Zur Installation ist das Systembuska-bel im VIBRONET Signalmaster-Schaltschrankanzuschließen und die Alarmbox über die An-schlußklemmen mit dem Leitsystem zu verbin-den.
Alarm box
B 3.13B3.13 ... B3.13a
Dig. output (16x)VIB 5.910
Systembus
SIGNALMASTER
VIBRONET R
RE-START
LOG-BOOKSTOP
LIGHT
VIBRONETSignalmaster
Alarm boxVIB 5.897
SPS/ PLS
ApplicationProvides up to 16 additional digital outputs forthe signalling/ processing of alarm states viaprocess control systems or programmable con-trol units.
DescriptionThe upgrade module (VIB 5.910) is mounted ina stable switching cabinet and the cables areconnected via the system bus and the termi-nals. To carry out the installation, the systembus cable must be connected in the VIBRONETSignalmaster switching cabinet and the alarmbox must be connected with the control sys-tem via the terminals.
ProduktblattProduct summary
©PR
ÜFT
ECH
NIK
Con
diti
on M
onit
orin
g | O
skar
-Mes
ster
-Str
. 19
-21
| D-8
5737
Ism
anin
g, D
euts
chla
nd |
Ver
sion
: 03
.06
VIBRONET Signalmaster Alarm box - VIB 5.897
Technische Daten
Material St. 12.03, Korpus 1,5mm, Tür 1,5mm,
Erdung in Korpus und Tür
Dichtung eingeschäumt (mit geschlossener Außenhaut)
Scharniere wechselbarer Anschlag (ca. 140° Öffnung)
Oberflächenschutz Eisenphosphatiert und pulverlackiert
Schutzart IP 55
Abmessungen:
Technical data
Material Steel 12.03, body 1.5mm, door 1.5mm
Grounding In body and door
Sealing Foamed (with a closed external surface)
Hinges Changeable stop (approx. 140° opening)
Surface protection Iron phosphated and powder coated
Protection class IP 55
Dimensions:
B 3.13aB3.13 ... B3.13a
300 / 11 4/5"
420
130 / 5 1/8"260 / 10 1/4"
Ø 81/3"
400 /15 3/4"
ProduktblattProduct summary
Tele-Monitoring & -DiagnoseTele monitoring & diagnosis
VIBRONET® Signalmaster©
PRÜ
FTEC
HN
IKC
ondi
tion
Mon
itor
ing
| Osk
ar-M
esst
er-S
tr.
19-2
1 | D
-857
37 Is
man
ing,
Deu
tsch
land
| V
ersi
on:
03.0
6
B 3.14B3.14 ... B3.14a
VIB 8.957 OMNITREND für VIBRONET OMNITREND for VIBRONETSignalmaster, Standard Signalmaster, Standard
VIB 8.958 -, Limited Edition -, Limited Edition
VIB 5.883 Gerätetreiber 'Standard' Device driver 'Standard'
VIB 5.883-LE Gerätetreiber 'Limited Edition' Device driver 'Limited Edition'
VIB 8.957-P PC-Lizenz PC licence
VIB 8.965 Upgrade: 'LE' auf 'Standard' Upgrade: 'LE' to 'Standard'
VersionenMit der Version 'Limited Edition' (VIB 8.958)können nur Trenddaten verarbeitet werden.
Bestellhinweise*Mit der OMNITREND CD VIB 8.957 (VIB 8.958)erhalten Sie außerdem:
VIB 8.957-P PC-Lizenz (Kommunikations-passwort für einen VIBRONETSignalmaster)
VIB 8.957-OMT Passwortzertifikat (Registrie-rung der OMNITREND Vollversi-on; wird erst nach Anforderungdes Registrierungspasswortes('Return-Fax') verschickt).
(VIB 8.958-OMT bei VIB 8.958)VIB 9.631.D OMNITREND, Erste Schritte
* Um die Auftragsabwicklung zu vereinfachen, faxen Sie bitte bei derBestellung evtl. vorhandene Registrierzertifikate mit.
* To simplify the order processing, please fax any existing registrationcertificates when ordering.
VersionsOnly trend data can be evaluated with version'Limited Edition' (VIB 8.958).
Order information*The OMNITREND software package VIB 8.957(VIB 8.958) contains the CD ROM and thefollowing items:
VIB 8.957-P PC licence (Communicationpassword for one VIBRONETSignalmaster)
VIB 8.957-OMT Password certificate (Regist-ration of the OMNITREND fullversion; will only be sent outafter the request for the regi-stration password ('Return fax')has been received.
(VIB 8.958-OMT for VIB 8.958)VIB 9.631G OMNITREND getting started
ProduktblattProduct summary
©PR
ÜFT
ECH
NIK
Con
diti
on M
onit
orin
g | O
skar
-Mes
ster
-Str
. 19
-21
| D-8
5737
Ism
anin
g, D
euts
chla
nd |
Ver
sion
: 03
.06
Der Gerätetreiber (VIB 5.883 / -LE) wird benö-tigt, um eine bereits vorhandene OMNITRENDSoftware mit VIBRONET Signalmaster zu be-treiben. VIB 5.883 enthält:
VIB 8.970 Condition Monitoring Soft-ware, Programm CD
VIB 8.957-P s.o.VIB 8.957-OMT s.o.(VIB 8.958-OMT bei VIB 5.883-LE )VIB 9.631.D OMNITREND, Erste Schritte
Mit der PC-Lizenz VIB 8.957-P wird je einweiterer VIBRONET Signalmaster in OMNI-TREND registriert.
Mit dem Upgrade-Paket VIB 8.965 läßt sichdie OMNITREND-Version 'Limited Edition' zurVersion 'Standard' aufrüsten. Lieferumfang:
VIB 8.970 s.o.VIB 8.957-P s.o.VIB 8.957-OMT s.o.VIB 9.631.D OMNITREND, Erste Schritte
The device driver (VIB 5.883 / -LE) is required tooperate the OMNITREND software alreadyavailable with the VIBRONET Signalmaster.VIB 5.883 contains:...
VIB 8.970 Condition Monitoring Soft-ware, program CD
VIB 8.957-P s. aboveVIB 8.957-OMT s. above(VIB 8.958-OMT for VIB 5.883-LE )VIB 9.631G OMNITREND getting started
Each further VIBRONET Signalmaster in OMNI-TREND is registered with a separate VIB 8.957-P PC license.
The OMNITREND 'Limited Edition' version canbe upgraded to the 'Standard' version usingthe VIB 8.965 upgrade package. Scope ofdelivery:
VIB 8.970 s. aboveVIB 8.957-P s. aboveVIB 8.957-OMT s. aboveVIB 9.631G OMNITREND getting started
B 3.14aB3.14 ... B3.14a
PRÜFTECHNIKCondition MonitoringPostfach 12 6385730 IsmaningGermanywww.pruftechnik.comTel. +49 (0)89 99 61 6-0Fax +49 (0)89 99 61 6-300eMail: [email protected]
Für messbare Erfolge in der Instandhaltung
Gedruckt in Deutschland VIB 9.662-3.03.06.0DGVIBRONET®, VIBROCORD®, VIBCODE®, VIBROTIP®, VIBSCAN-NER®, OMNITREND® sind eingetragene Warenzeichen der PRÜF-TECHNIK AG. Irrtümer und Konstruktionsänderungen, insbe-sondere im Sinne technischer Weiterentwicklungen vorbehal-ten. Nachdruck, auch auszugsweise, nur mit schriftlicher Geneh-migung der PRÜFTECHNIK AG.© Copyright 1999 by PRÜFTECHNIK AG
Productive maintenance technology
Printed in Germany VIB 9.662-3.03.06.0DGVIBRONET®, VIBROCORD®, VIBCODE®,VIBROTIP®, VIBSCAN-NER®, OMNITREND® are registered trademarks of PRÜFTECHNIKDieter Busch AG. PRÜFTECHNIK products are the subject ofpatents granted and pending throughout the world. Contentssubject to change without further notice, particularly in theinterest of further technical development. Reproduction, in anyform whatsoever, only upon express written consent ofPRÜFTECHNIK.© Copyright 1999 by PRÜFTECHNIK AG