vibro-bugzi ran into a cute bristlebot (model on thingiverse, and made a few changes - to reduce the...
TRANSCRIPT
![Page 1: Vibro-bugzI ran into a cute Bristlebot (model on Thingiverse, and made a few changes - to reduce the bill of material and simplify assembly. Feel free to edit / re-mix my re-mix (](https://reader034.vdocuments.us/reader034/viewer/2022052018/6030b8b3f5013f32f7481acd/html5/thumbnails/1.jpg)
Vibro-bugzCreated by Rick Winscot
Last updated on 2018-08-22 03:54:14 PM UTC
![Page 2: Vibro-bugzI ran into a cute Bristlebot (model on Thingiverse, and made a few changes - to reduce the bill of material and simplify assembly. Feel free to edit / re-mix my re-mix (](https://reader034.vdocuments.us/reader034/viewer/2022052018/6030b8b3f5013f32f7481acd/html5/thumbnails/2.jpg)
2346
1115
Guide Contents
Guide ContentsMaterials / Tools3D PrintingMotorZip-it GoodGoogly Eyes
© Adafruit Industries https://learn.adafruit.com/vibro-bugz Page 2 of 18
![Page 3: Vibro-bugzI ran into a cute Bristlebot (model on Thingiverse, and made a few changes - to reduce the bill of material and simplify assembly. Feel free to edit / re-mix my re-mix (](https://reader034.vdocuments.us/reader034/viewer/2022052018/6030b8b3f5013f32f7481acd/html5/thumbnails/3.jpg)
Materials / ToolsMy first introduction to Bristlebots (https://adafru.it/nNd)... was way back in 2007 - it's amazing to see the variety ofcreations grown from the roots of that project.
Here is my variation on a theme.
The materials / tools list is pretty short...
Soldering Iron (https://adafru.it/dyY) / Solder (https://adafru.it/nNe)Flush Wire Cutters (https://adafru.it/dxQ)Needlenose Pliers (https://adafru.it/nNf)22AWG Solid-core Wire (https://adafru.it/nNA)Pager Motor (https://adafru.it/nNB)CR2032 Battery (https://adafru.it/nNC)Googly Eyes (https://adafru.it/nND)Zip Ties (https://adafru.it/nNE)Hot-glue / Super Glue
From start to finish, it shouldn't take more than 1/2 hour to 3D print your parts and assemble a Vibro-bug.
Small and simple projects... can be great fun!
© Adafruit Industries https://learn.adafruit.com/vibro-bugz Page 3 of 18
![Page 4: Vibro-bugzI ran into a cute Bristlebot (model on Thingiverse, and made a few changes - to reduce the bill of material and simplify assembly. Feel free to edit / re-mix my re-mix (](https://reader034.vdocuments.us/reader034/viewer/2022052018/6030b8b3f5013f32f7481acd/html5/thumbnails/4.jpg)
3D PrintingSo... I ran into a cute Bristlebot (https://adafru.it/nNF)model on Thingiverse, and made a few changes - to reduce thebill of material and simplify assembly.
Feel free to edit / re-mix my re-mix (https://adafru.it/nOa) on Tinkercad...
Or download the ready-to-print file below - what color filament are you going to use?
https://adafru.it/nOb
https://adafru.it/nOb
© Adafruit Industries https://learn.adafruit.com/vibro-bugz Page 4 of 18
![Page 5: Vibro-bugzI ran into a cute Bristlebot (model on Thingiverse, and made a few changes - to reduce the bill of material and simplify assembly. Feel free to edit / re-mix my re-mix (](https://reader034.vdocuments.us/reader034/viewer/2022052018/6030b8b3f5013f32f7481acd/html5/thumbnails/5.jpg)
© Adafruit Industries https://learn.adafruit.com/vibro-bugz Page 5 of 18
![Page 6: Vibro-bugzI ran into a cute Bristlebot (model on Thingiverse, and made a few changes - to reduce the bill of material and simplify assembly. Feel free to edit / re-mix my re-mix (](https://reader034.vdocuments.us/reader034/viewer/2022052018/6030b8b3f5013f32f7481acd/html5/thumbnails/6.jpg)
MotorGrab some solid-core 22AWG wire... in contrast or compliment to your bug body.
Cut two 35mm lengths.
Remove ~5mm of insulation on the top with wire strippers or gently roll the wire with a razor-knife.
© Adafruit Industries https://learn.adafruit.com/vibro-bugz Page 6 of 18
![Page 7: Vibro-bugzI ran into a cute Bristlebot (model on Thingiverse, and made a few changes - to reduce the bill of material and simplify assembly. Feel free to edit / re-mix my re-mix (](https://reader034.vdocuments.us/reader034/viewer/2022052018/6030b8b3f5013f32f7481acd/html5/thumbnails/7.jpg)
Remove ~15mm of insulation on the bottom with wire strippers or the same roll-and-cut technique shown above.
Which will leave ~15mm of insulation in the middle-ish of the wire.
© Adafruit Industries https://learn.adafruit.com/vibro-bugz Page 7 of 18
![Page 8: Vibro-bugzI ran into a cute Bristlebot (model on Thingiverse, and made a few changes - to reduce the bill of material and simplify assembly. Feel free to edit / re-mix my re-mix (](https://reader034.vdocuments.us/reader034/viewer/2022052018/6030b8b3f5013f32f7481acd/html5/thumbnails/8.jpg)
Slap some flux on the pager motor contacts and the wire.
Match the angle of the motor contacts by bending the ends of the wire a bit. Be gentle, too much stress on the motorcan break the contacts.
© Adafruit Industries https://learn.adafruit.com/vibro-bugz Page 8 of 18
![Page 9: Vibro-bugzI ran into a cute Bristlebot (model on Thingiverse, and made a few changes - to reduce the bill of material and simplify assembly. Feel free to edit / re-mix my re-mix (](https://reader034.vdocuments.us/reader034/viewer/2022052018/6030b8b3f5013f32f7481acd/html5/thumbnails/9.jpg)
Let's make the wire to motor connector bits a little more durable by adding a 6mm length of 1/4 inch shrink-tube.
Apply heat evenly... and voila!
© Adafruit Industries https://learn.adafruit.com/vibro-bugz Page 9 of 18
![Page 10: Vibro-bugzI ran into a cute Bristlebot (model on Thingiverse, and made a few changes - to reduce the bill of material and simplify assembly. Feel free to edit / re-mix my re-mix (](https://reader034.vdocuments.us/reader034/viewer/2022052018/6030b8b3f5013f32f7481acd/html5/thumbnails/10.jpg)
Carefully bend both wires 90 degrees to the motor with a pair of needlenose pliers.
© Adafruit Industries https://learn.adafruit.com/vibro-bugz Page 10 of 18
![Page 11: Vibro-bugzI ran into a cute Bristlebot (model on Thingiverse, and made a few changes - to reduce the bill of material and simplify assembly. Feel free to edit / re-mix my re-mix (](https://reader034.vdocuments.us/reader034/viewer/2022052018/6030b8b3f5013f32f7481acd/html5/thumbnails/11.jpg)
Zip-it GoodYour motor assembly should fit snug in the bug body...
Passing the two wires through the holes in the middle - just make sure at this point that the end of the motor spinsfreely.
Zip-ties come in a plethora of colors these days... I think I'll stick with orange.
© Adafruit Industries https://learn.adafruit.com/vibro-bugz Page 11 of 18
![Page 12: Vibro-bugzI ran into a cute Bristlebot (model on Thingiverse, and made a few changes - to reduce the bill of material and simplify assembly. Feel free to edit / re-mix my re-mix (](https://reader034.vdocuments.us/reader034/viewer/2022052018/6030b8b3f5013f32f7481acd/html5/thumbnails/12.jpg)
Zip-it... zip-it good... on both sides.
Bend your wires up and over the battery compartment.
© Adafruit Industries https://learn.adafruit.com/vibro-bugz Page 12 of 18
![Page 13: Vibro-bugzI ran into a cute Bristlebot (model on Thingiverse, and made a few changes - to reduce the bill of material and simplify assembly. Feel free to edit / re-mix my re-mix (](https://reader034.vdocuments.us/reader034/viewer/2022052018/6030b8b3f5013f32f7481acd/html5/thumbnails/13.jpg)
Continuing into the indentations / wire guides on top.
Make sure that your wire makes solid contact with the CR2032 battery.
© Adafruit Industries https://learn.adafruit.com/vibro-bugz Page 13 of 18
![Page 14: Vibro-bugzI ran into a cute Bristlebot (model on Thingiverse, and made a few changes - to reduce the bill of material and simplify assembly. Feel free to edit / re-mix my re-mix (](https://reader034.vdocuments.us/reader034/viewer/2022052018/6030b8b3f5013f32f7481acd/html5/thumbnails/14.jpg)
© Adafruit Industries https://learn.adafruit.com/vibro-bugz Page 14 of 18
![Page 15: Vibro-bugzI ran into a cute Bristlebot (model on Thingiverse, and made a few changes - to reduce the bill of material and simplify assembly. Feel free to edit / re-mix my re-mix (](https://reader034.vdocuments.us/reader034/viewer/2022052018/6030b8b3f5013f32f7481acd/html5/thumbnails/15.jpg)
Googly EyesIt's time to add a dash of personality... you will need a dab of hot-glue or super glue for this step.
I like to spread-out a bag of assorted googly eyes on the table - and let awesome happen.
"The eyes are the window of the soul."
One eye.
© Adafruit Industries https://learn.adafruit.com/vibro-bugz Page 15 of 18
![Page 16: Vibro-bugzI ran into a cute Bristlebot (model on Thingiverse, and made a few changes - to reduce the bill of material and simplify assembly. Feel free to edit / re-mix my re-mix (](https://reader034.vdocuments.us/reader034/viewer/2022052018/6030b8b3f5013f32f7481acd/html5/thumbnails/16.jpg)
Two eye.
Little eye.
© Adafruit Industries https://learn.adafruit.com/vibro-bugz Page 16 of 18
![Page 17: Vibro-bugzI ran into a cute Bristlebot (model on Thingiverse, and made a few changes - to reduce the bill of material and simplify assembly. Feel free to edit / re-mix my re-mix (](https://reader034.vdocuments.us/reader034/viewer/2022052018/6030b8b3f5013f32f7481acd/html5/thumbnails/17.jpg)
BIG.
Be creative and have fun...
© Adafruit Industries https://learn.adafruit.com/vibro-bugz Page 17 of 18
![Page 18: Vibro-bugzI ran into a cute Bristlebot (model on Thingiverse, and made a few changes - to reduce the bill of material and simplify assembly. Feel free to edit / re-mix my re-mix (](https://reader034.vdocuments.us/reader034/viewer/2022052018/6030b8b3f5013f32f7481acd/html5/thumbnails/18.jpg)
I wonder what a Vibro-bug would look like with eyes all over?
© Adafruit Industries Last Updated: 2018-08-22 03:54:08 PM UTC Page 18 of 18