vibe cpe device: p2pb-202/203 - getvibe.infogetvibe.info/docs/v1_vibe_p2pb-203c.pdf · vibe cpe...

2
ViBE CPE Device: P2PB-202/203 Specifically built to run the full ViBE operating system the P2PB- 202/203 offers the full range of ViBE functionality and can process up to 150 simultaneous calls. Key Features: Up to 100+ calls per 1MB bandwidth ViBE delivers patented granular unmatched QOS ViBE supports Real Time Trans-coding Codec Agnostic Multiple failover options enabling failover to alternate bandwidths with no loss of call Works over any bandwidth including Satellite, 3G, WIMAX ISDN etc ViBE supports converged solution delivery ViBE typically reduces jitter to sub 1ms RAIN mode ensures instantaneous failover and eradication of intermittent jitter Bonding of up to 8 links per site Real Time underlying network status reports Network Load reduction Product Sheet - ViBE - SPS-503 Appliance Functionality: Number of Ethernet ports 3 Port type 10/100 RS232 console port Yes IPsec support Yes VLAN tagging support Yes SNMP monitoring Yes ViBE Web interface Yes SSH Console Yes Flexible routing policies Yes Flexible NAT policies Yes Supports VRRP Yes Supports ViBE link bonding Yes Supports Multi-Link redundancy Yes Controls number of permissible RTP channels Yes Can set Up and Down link bandwidth Yes Byte Level QOS Yes G711 Transcoding support Yes SIP Busy signalling when limit reached Yes Remote Provisioning Yes Ability to provision other ViBE devices No SIP redirect support Yes Auto set bandwidth based on synch rate No Max no of RTP channels 150 RAIN mode supported Yes Real Time Link monitoring Yes SOAP interface Yes Network Load reduction Yes BGP and OSPF routing protocols Yes Private CPE Groups No Syslog server support Yes DHCP Server Yes

Upload: others

Post on 27-Sep-2020

2 views

Category:

Documents


1 download

TRANSCRIPT

Page 1: ViBE CPE Device: P2PB-202/203 - getvibe.infogetvibe.info/docs/v1_ViBE_P2PB-203c.pdf · ViBE CPE Device: P2PB-202/203 Specifi cally built to run the full ViBE operating system the

ViBE CPE Device: P2PB-202/203 Specifi cally built to run the full ViBE operating system the P2PB-202/203 offers the full range of ViBE functionality and can process up to 150 simultaneous calls.

Key Features: Up to 100+ calls per 1MB

bandwidth

ViBE delivers patented granular unmatched QOS

ViBE supports Real Time Trans-coding

Codec Agnostic

Multiple failover options enabling failover to alternate bandwidths with no loss of call

Works over any bandwidth including Satellite, 3G, WIMAX ISDN etc

ViBE supports converged solution delivery

ViBE typically reduces jitter to sub 1ms

RAIN mode ensures instantaneous failover and eradication of intermittent jitter

Bonding of up to 8 links per site

Real Time underlying network status reports

Network Load reduction

Product Sheet - ViBE - SPS-503 Appliance

Functionality:Number of Ethernet ports 3

Port type 10/100RS232 console port Yes IPsec support YesVLAN tagging support YesSNMP monitoring YesViBE Web interface Yes SSH Console YesFlexible routing policies YesFlexible NAT policies YesSupports VRRP YesSupports ViBE link bonding YesSupports Multi-Link redundancy YesControls number of permissible RTP channels YesCan set Up and Down link bandwidth YesByte Level QOS YesG711 Transcoding support YesSIP Busy signalling when limit reached YesRemote Provisioning YesAbility to provision other ViBE devices NoSIP redirect support YesAuto set bandwidth based on synch rate NoMax no of RTP channels 150RAIN mode supported YesReal Time Link monitoring YesSOAP interface YesNetwork Load reduction YesBGP and OSPF routing protocols YesPrivate CPE Groups NoSyslog server support YesDHCP Server Yes

Page 2: ViBE CPE Device: P2PB-202/203 - getvibe.infogetvibe.info/docs/v1_ViBE_P2PB-203c.pdf · ViBE CPE Device: P2PB-202/203 Specifi cally built to run the full ViBE operating system the

Functionality:

ViBE QOS

ViBE Acceleration

ViBE Bonding

ViBE Real Time Stats

ViBE Rain Mode (allows duplicated transmissions to eradicate jitter and failover delay)

ViBE Encryption

ViBE Failover

Mechanical & Environmental

Operating Temp. 0 ~ 50ºC (32 ~ 122ºF)

Operating Humidity 5 ~ 95% (non-condensing)

Dimension (W x D x H) 158x 55 x 28 mm

Power Supply

AC Input 100 ~ 240V, 50 ~ 60Hz

DC Output 18V , 3-5 W

To learn more about ViBE please visit:getvibe.info

POWERNET 249 Midsummer Boulevard,Central Milton Keynes, Buckinghamshire, MK9 1EA

t: 01908 605188 f: 01908 242099 e: [email protected]: www.getvibe.info

Product Sheet - ViBE - SPS-503 Appliance

Typical Point to Point Confi guration

Typical Service Provider / Enterprise Confi guration

Powernet is a part of the Timico Technology GroupPowernet is a trading name of Power Internet Ltd Registered in England No 3053650Registered Address: Norfolk House Centre, 82 Saxon Gate West, Central Milton Keynes, MK9 2DL

ADSL/MPLSInternet