vga card gv-rx24t256hp - gigabyte...step 1: found new hardware wizard: video controller (vga...

Jul. 5, 2007

VGA CardGV-RX24T256HP

VGA Card

Jul. 5, 2007

GV-RX24T256HP

GV-RX24T256HPATI RadeonTM HD 2400 XT Graphics Accelerator

User's ManualRev. 10112MD-RX24T2H-101R

* The WEEE marking on the product indicates this product must not be disposed of with user's other household wasteand must be handed over to a designated collection point for the recycling of waste electrical and electronic equipment!!

* The WEEE marking applies only in European Union's member states.

Copyright© 2007 GIGABYTE TECHNOLOGY CO., LTDCopyright by GIGA-BYTE TECHNOLOGY CO., LTD. ("GBT"). No part of this manual may be reproduced or transmitted in any fromwithout the expressed, written permission of GBT.TrademarksThird-party brands and names are the property of their respective owners.NoticePlease do not remove any labels on VGA card, this may void the warranty of this VGA cardDue to rapid change in technology, some of the specifications might be out of date before publication of this booklet.The author assumes no responsibility for any errors or omissions that may appear in this document nor does the author make acommitment to update the information contained herein.Macrovision corporation product notice:This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual property rights.Use of this copyright protection technology must be authorized by Macrovision, and is intended for home and other limited viewinguses only unless otherwise authorized by Macrovision. Reverse engineering or disassembly is prohibited.

- 2 -

Engl

ish

GV-RX24T256HP Graphics Accelerator

Table of Contents

1. Introduction ......................................................................................... 31.1. Features ..................................................................................................... 31.2. Minimum System Requirements ................................................................... 3

2. Hardware Installation ........................................................................... 42.1. Board Layout .............................................................................................. 42.2. Hardware Installation ................................................................................... 6

3. Software Installation .......................................................................... 103.1. Windows® XP Driver Installation ................................................................. 10

3.1.1. Operating System Requirement ................................................................................. 103.1.2. DirectX Installation ......................................................................................................... 113.1.3. Driver Installation .......................................................................................................... 123.1.4. Taskbar Icon ................................................................................................................. 143.1.5. Display Properties pages ............................................................................................ 15

4. Troubleshooting Tips ........................................................................ 32

5. Appendix .......................................................................................... 33Resolutions and Color Depth Table (In Windows® XP) ...................................... 33

Introduction- 3 -

English

1. Introduction1.1. Features

• Powered by ATI RadeonTM HD 2400 XT Graphics Processing Unit (GPU)• Supports PCI Express x16• Integrated with 256 MB GDDR3 memory• Supports DirectX 9.0c/10• Supports AV / S-Video / TV-Out and HDTV output• Supports 1 Dual-Link DVI-I connector• Supports 1 D-Sub connector• Supports HDMI connector (by adapter, optional)

1.2. Minimum System Requirements• Hardware

- Intel® Pentium® 4 or AMD AthlonTM

- 512 MB of system memory; 1 GB or more for best performance- Optical drive for software installation (CD-ROM or DVD-ROM drive)

• Operating System- Windows® Vista- Windows® XP with Service Pack 2 (SP2)- Windows® XP Professional x64 Edition

- 4 -

Engl

ish


2. Hardware Installation

TV-Out

DVI-I Connector

D-Sub Connector(15-pin)

TV-Out

DVI-IConnector

Digital LCD Monitor

DVI Output

D-SubConnector

(15-pin)

DVI-I to D-SubAdapter

S-Video Output

Pb/AV Output

Pr

Y

NTSC / PAL TV Projector

HDTV

OR

NTSC / PAL TV Projector

OR

DVI-I to HDMI Adapter

HDMI Monitor

Analog LCD Monitor Analog CRT Monitor

OR

Analog LCD Monitor Analog CRT Monitor

OR D-Sub Output

D-SubOutput

2.1. Board Layout

Hardware Installation- 5 -

English

Expansion cards contain very delicate Integrated Circuit (IC) chips. Toprotect them against damage from static electricity, you should follow someprecautions whenever you work on your computer.

1. Turn off your computer and unplug power supply.2. Use a grounded wrist strap before handling computer components. If you do not have

one, touch both of your hands to a safely grounded object or to a metal object, such asthe power supply case.

3. Place components on a grounded antistatic pad or on the bag that came with thecomponents whenever the components are separated from the system.

The card contains sensitive electric components, which can be easily damaged by staticelectricity, so the card should be left in its original packing until it is installed.Unpacking and installation should be done on a grounded anti-static mat. The operatorshould be wearing an anti-static wristband, grounded at the same point as the anti-staticmat.Inspect the card carton for obvious damage. Shipping and handling may cause damageto your card. Be sure there are no shipping and handling damages on the card beforeproceeding.

DO NOT APPLY POWER TO YOUR SYSTEM IF IT HAS BEEN DAMAGED ONTHE CARD. In order to ensure your graphics card working correctly, please use officialGIGABYTE BIOS only. Use none official Gigabyte BIOS might cause problemon the graphics card.

- 6 -

Engl

ish


2.2. Hardware InstallationInstalling Your graphics card.Now that you have prepared your computer, you are ready to install your graphics acceleratorcard.

To remove the existing graphics card:1. Power off the computer and monitor, then

disconnect the display cable from the backof your computer.

2. Remove the computer cover. If necessary,consult your computer's manual for help inremoving the cover.

3. Remove any existing graphics card fromyour computer.


English

2. Replace the screw to fasten the card in place,and replace the computer cover.

You are now ready to proceed with the installation of the graphics card drivers. Please referto next chapter for detailed instructions.

3. Plug the display cable into your card; thenturn on the computer and monitor. If yourgraphics card came with a DVI-I connector,you can connect a flat panel display to theappropriate connector, as shown below. Oruse the DVI-I-to-HDMI adapter to connectan HDMI monitor.

To TV/VCRTo D-Sub Monitor To Flat Panel Display

Connect an HDMI monitor viaDVI-I to HDMI adapter

To install your new graphics card:1. Locate the PCI Express x16 slot. If

necessary, remove the metal cover from thisslot; then align your graphics card with thePCI Express x16 slot, and press it in firmlyuntil the card is fully seated.

* Please make sure that the gold edge connector of the graphics card is securely inserted.

- 8 -

Engl

ish


GIGABYTE Video Adapter for Nvidia Graphics Cards

(1) Connecting HDTVConnect your HDTV cables to the video adapteraccording to the corresponding color.(Y= Green, Pr= Red, Pb= Blue)

(2) Connecting S-VideoIf your TV has a S-Video connection, connect the S-Video cable from your TV to the S-Video Out port on theadapter.

(3) Connecting AV OutputIf your TV has a Composite video connection, you canconnect the RCA cable from your TV to the AV Out porton the adapter.

Connect to the TV-Out porton the graphics card.

S-Video Out HDTV Component(Y+Pr+Pb)

AV Out


English

GIGABYTE Thermal Solution Guidelines:1. GIGABYTE established the use of silent pipes on graphics card's thermal solution, and has been

the leading company for silent thermal solution. GIGABYTE's passive thermal solution allowssystem to work perfectly in chassis with 40~50 degrees Celsius through the air flow of the system.Please beware of the other excess component or insufficient system thermal design that maycause high system temperature. Excess high temperature will affect the passive thermal designand thus compromising system stability.

2. GIGABYTE TECHNOLOGY's passive thermal design effectively implemented heat exchange,radiation and convection to improve stability of the system. Please maintain passive thermal sinkat a normal and clean environment. Extra dust on heatsink may decrease the effectiveness of thethermal design.

Silent Thermal Technology Passive Thermal Design

- 10 -

Engl

ish


3. Software Installation

In this manual, we assume that your CD-ROM Drive letter to be Drive D:

The installation of Windows® XP drivers is very simple. When you insert the driver CD intoyour CD-ROM drive, you can see the AUTORUN window (if it does not show up, run "D:\setup.exe"). Then you can follow the guides to setup your graphics card driver. (Pleasefollow the subsection 3.1.3 "Driver installation" to install the driver for your graphicsaccelerator.)

3.1. Windows® XP Driver Installation

3.1.1. Operating System Requirement

• When loading the graphics card drivers for the system, please make sure your systemhas installed DirectX 9.0c or later version.

• If you install the graphics card drivers for the motherboard, which consist of SIS, or VIAchipsets, please install the appropriate driver program for that motherboard. Or pleasecontact your motherboard nearest dealer for motherboard driver.

Software Installation- 11 -

English

3.1.2. DirectX InstallationInstall Microsoft DirectX to enable 3D hardware acceleration support for Windows® XP toachieve better 3D performance.

Note: For software MPEG support in Windows® XP, you must install DirectX first. Userswho run Windows XP with Service Pack 2 or above do not need to install DirectXseparately.

Step 1. When autorun window show up, click theInstall DirectX 9 item.

Click the Install DirectX 9 item.

Step 2. Choose I accept the agreementand click the Next button.

Step 3. Click the Next button.

Step 4. Click Finish to restart computer.Then the DirectX 9 installation is completed.

Installing the components.

- 12 -

Engl

ish


3.1.3. Driver Installation

A. New hardware foundAfter the graphics card is inserted into your computer at the first time, the windows willautomatically detect a new hardware in the system and pop out a "New Hardware Found"message. The following is the step-by-step installation guide.

Step 1: Found new hardware wizard: Video controller (VGA Compatible)

Click the "Next" button to install the driver. (Thereis a driver CD disk that came with your graphicsaccelerator, please insert it now.)

Or click the "Cancel" button to install the driverfrom AUTORUN window.

Step 2: Found new hardware wizard: Searching and installingThe wizard will search for the driver and install it automatically.

Step 3: Found new hardware wizard: FinishClick the "Finish" button to finish the installation.


English

B. Driver installation (Autorun Window)Insert the driver CD disk into your CD-ROM, and then you can see the AUTORUN window.If it does not show up, please run "D:\setup.exe".

Click the Install Display Driver item.

Step 1. When autorun window show up, click theInstall Display Driver item.

Setp 4. Click Express or Custom icon.

Step 5. Click the Finish button to restart computer.Then the driver installation is completed.

Windows installings the components.

Step 2. Click Next button. Step 3. Click Yes button.

- 14 -

Engl

ish


3.1.4. Taskbar IconATI Catalyst® Control Center:After installation of the display driver, you will find an ATI Catalyst® Control Center icon on thetaskbar's status area. The ATI Catalyst® Control Center is used to configure all your graphics cardsettings. Right-click the icon to enter the ATI Catalyst® Control Center (refer to Figure 1). Or you canright-click on the desktop and select ATI CATALYST(R) Control Center (refer to Figure 2).

Figure 1

Figure 2


English

3.1.5. Display Properties pagesTo access Display Properties pages, right-click on Desktop and then select Properties. TheDisplay Properties dialog box shows the information of display adapter, color, the range ofdisplay area, and the refresh rate.

Settings (Resolutions and Color depth for Windows)You may adjust the screen resolution and color quality settings in this dialog box.

You can move the slider to change the resolution.

Click the Advanced button for adapter and setting.

You can click the item to change the color quality.

(Note) The CRT+TV configuration requires that you connect your CRT display to the DVI connector onthe card using the DVI-I to D-Sub adapter to ensure normal operation.This configuration is not supported if the CRT monitor is directly attached to the D-Sub port on thecard.

DisplayMatrix

Model GV-RX24T256HPCRT+TV (Note) YesCRT+DVI YesDVI+TV YesDVI+TV+CRT NoHDMI+TV YesHDMI+CRT Yes

- 16 -

Engl

ish


ATI Catalyst® Control Center Basic View :The Basic View is the default view when ATI Catalyst Control Center is launched for the first time. Thisinterface provides access to the basic settings and advanced features of your ATI graphics products.You can switch between Basic View and Advanced View at any time.

To access more settings in Basic View , clickBasic, and then click Next.

Easy Setup Wizards:Choose a wizard from the central list and click Go for step-by-step assistance.

Avivo Video ConverterThis wizard assists you to convert videos from one file format to another.

Step 1: Select Avivo Video Converter,then click Go.

Step 2: Select the video file to be converted.

Step 3: In the Output Folder area, select the destination folder where the new file will be located. ClickNext.


English

The video file has been successfully converted.

Setup my display configurationThis wizard allows you to configure displaysetting for desktop viewing.

Step 4: In the Output Video Format list, selecta file format for the new file. If you wish to changethe name of the new file, enter the new name inthe Output File area. Finally, click Next to startfile conversion.

- 18 -

Engl

ish


Information Center:The Information Center page in Basic and Advanced View provides hardware and software informationabout the installed graphics card.

Graphics SoftwareProvides software information including driverversion, CATALYST version, Direct 3D ver-sion and so on.Graphics HardwareProvides hardware information incluing graph-ics chipset, BIOS version, memory size, coreclock and so on.

Quick Settings:The Quick Settings page provide access to three main settings.

3D Quality3D Performance and Quality settings allowsyour 3D games and applications to get fasterperformance and better quality with a morebalanced setting.Video PlaybackUse this option to optimize video playback indifferent room environment or to select howvideo playback appears on the second display.Display SetupThis option allows you to configure yourdesktop, including changing desktop resolutionand desktop mode, setting up extended desk-top (requires more than one display), and rotat-ing desktop image to match new displayorientation.


English

ATI CatalystTM Control Center Advanced ViewThe Advanced page allows you to configure all of the many available settings of your ATI graphics card.

View Properties:The CATALYST Control Center dashboard supports three types of views: Basic View/Advanced View/ Custom View.

Basic ViewThe Basic view is the default view whenCATALYST Control Center is launched for thefirst time. Refer to the previous pages for details.Advanced ViewThe Advanced view provides access to theadvanced features on each page. The leftnavigation pane displays a tree view that listsall the advanced features. The Advanced viewis recommended for experienced users.Custom ViewThe Custom view allows you to display onlythe features you choose in the left navigationpane. The Custom view is recommended forexperienced users who want to expose onlythe features they adjust most often or that their3D application supports.

Hotkeys Properties:The Hotkeys Manager allows you to create shortcut key combinations to quickly perform tasks suchas changing a graphics setting or opening an application. A Hotkey is a combination of a modifier keyor keys, such as Ctrl, Alt, or Shift, and any letter from the alphabet.

- 20 -

Engl

ish


Profiles Properties:You can use profiles to create customized environments for your desktop, video, and 3D applications.Define and save your own personal video settings that can be quickly activated manually, through aHotkey, or by file association.

Preferences Properties:The Preferences page helps to restore defaults, change skins, and update the Catalyst Control Center.The Catalyst Control Center Preferences page contains the following options:

Always on TopHide TooltipsHide Toolbar TextHide Splash ScreenEnable System Tray MenuSelect a Language ...Select a Skin ...Restore Factory Defaults ...

Note: A profile applies to a specific graphics card.If there is more than one graphics cardinstalled in your computer, you need toselect the appropriate card before creating,loading, or activating a Profile.


English

Help Properties:The Catalyst Control Center Help feature allows you to access the comprehensive online help, registeryour product, or generate a problem report should you require technical support.The Catalyst Control Center Help feature offers the following options:

Help for this Page Help Contents ... Search Help ... Go to ATI.com About Catalyst Control Center ...

- 22 -

Engl

ish


Displays Manager:Displays Manager is the central location for configuring your display devices and arranging yourdesktop. Use Displays Manager to quickly change your display setup, arrange your desktop in a multi-monitor environment, and enable TV Out.

The Display Options aspect gives you additional control to optimize performance of OpenGL® andDirect 3D® applications. Use 3D Refresh Rate Override to set a refresh rate of your choice when afull-screen application or game has a default refresh rate that is lower than optimal. Choose one of theDisplay Detection Options to prevent screen flicker when detecting a display. If you are using anolder TV or one that has non-standard inputs that may not be automatically detected, use Force TVDetection.

Display Options:

Note: The stretch vert ical ly and horizontal lyopt ions are not supported on systemsrunning Windows Vista.

Note: On systems running Windows Vista the 3DRefresh Rate Override and the DisplayDetection Option to configure panning ondisplays with limited resolution capabilitiesare not supported since refresh rate isbetter controlled by Windows Vista andWindows Vista does not support panning.


English

Monitor Properties1:

HDTV SupportUse HDTV Support when your CRT, DFP, orDTV display device supports one or more HDTVmodes that are not initially listed in the Dis-plays Manager due to an incomplete EDID(Extended Display Identification Data). Select-ing one or both of the HDTV modes adds themto the Force button located in the Displays Man-ager when the associated display is selected.If you have both CRT and DFP or DTV displaydevices and want both to support HDTV, selectthe Add 720... and Add 1080... check boxesin the HDTV Support pages for those devices.The following formats are fully supported:NTSC, PAL, SECAM.

AttributesMonitor Attributes provides information aboutthe attached monitor. You can also enableExtended Display Identification Data. ExtendedDisplay Identification Data (EDID) uses the in-formation provided by the attached monitor todetermine the limits for the resolution andrefresh rate.

AdjustmentsUse Monitor Adjustments to resize and reposi-tion the computer desktop on your monitor'sdisplay screen. You can also adjust the hori-zontal and vertical sync or enable compositesync.

Warning! Forcing a display mode that exceedsits EDID limits may result in permanent damageto your display!

- 24 -

Engl

ish


3D :

Standard SettingsThe Standard Settings page provides accessto a universal slider control where you cansimultaneously adjust all of the standard 3Dsettings for any type of 3D application. Theslider enables you to adjust for overall systemperformance, overall 3D image quality, or abalance between the two.This page is useful when you are not aware ofwhich type of 3D settings your application uses,or when you want to use an overall adjustmentcontrol that rapidly configures your application.

AvivoTM ColorUse AvivoTM Color for ATI graphics cards thatsupports per-display color settings. Indepen-dently set the hue, saturation, and tempera-ture for each attached and enabled display.


English

Anti-AliasingAnti-Aliasing (AA) is a rendering technique de-signed to remove jagged edges, shimmering,and pixelation problems that are common inrendered 3D images. Rather than determiningthe color to display for each pixel by samplinga single location at the pixel's center, anti-aliasingsamples multiple locations within each pixeland blends the results together to produce thefinal color.Anti-Aliasing can be set to favor either systemprocessing performance or image quality, orthe application can decide:Setting for performance is best used when the3D image is animated and smooth motion is themost important consideration.Setting for quality is best used when highlydetailed and realistic 3D objects is the mostimportant consideration.If you are unsure of how to configure anti-aliasing,use the Use application settings option. Yourd isp lay wi l l au tomat ica l ly ad jus t to theapplication's requirements.

Adaptive Anti-AliasingAdaptive anti-aliasing is a technique that ap-plies a combination of multi-sampling (MSAA)and super-sampling (SSAA) on 3D objects toimprove edge smoothness and fine detail. Thisfeature renders 3D objects containing transpar-encies more realistic, providing exceptionallevels of image quali ty while maintainingperformance.

- 26 -

Engl

ish


CATALYST® A.I.Catalyst® A.I. makes use of ATI's new textureanalyzer technology to optimize performancein 3D applications while maintaining or evenimproving image quality. It analyzes individualtextures as they are loaded to determine thebest and fastest way to display them.

Anisotropic FilteringAnisotropic Filtering is a technique that pre-serves detail on surfaces that have three-di-mensional perspective and fade away into thebackground. It works best when used in con-junction with Mipmapping.Anisotropic Filtering can be set to favor eitheran increase in system processing performanceor improved image quality:Setting for performance is best used withapplications that display objects with smooth,simple surfaces, l ike those seen in CADapplications.Setting for quality is best used with applicationsthat display highly detailed scenes,backgrounds, and textured objects, like thoseseen in 3D games.If you are unsure how to configure anisotropicfiltering, use the Use application settings option.Your display will automatically adjust to theapplication's requirements.


English

Mipmap Detail LevelMipmapping is a texturing technique thatpreserves the detail on a 3D object's surfaceas it moves into the background. A series oflow- and high-resolution texture maps are storedin memory and selectively used to create theobject's surface, depending on what level ofdetail is needed.Mipmap detail level can be set to favor eitheran increase in system processing performanceor improved image quality:Setting for performance is best used when the3D image is animated and smoothness of mo-tion is the most important consideration.Setting for quality is best used when high sur-face detail is required, especially if the ani-mated object rotates or moves into thebackground.

All SettingsThe All Settings page combines all of the prin-cipal 3D features onto a single page, withoutany preview window, allowing for quick ac-cess and adjustment. This page is useful whenit is not necessary to preview the adjustedsettings because the effect is already known orunderstood.

- 28 -

Engl

ish


More SettingsUse the More Settings dialog to select settingsfor the Direct 3D® and OpenGL® Application Pro-grammable Interfaces (API). These settings areprovided for resolving certain incompatibilitieswithin 3D applications that use one of theseAPIs. Use this dialog when you know whichtype of API (Direct 3D® or OpenGL® your 3Dapplication uses, and you want to select aparticular API-specific feature. If you are notsure which API your 3D application uses, con-sult the documentation of your 3D application.Note: The Alternate Pixel center Direct 3D®

sett ing is not supported on systemsrunning Windows Vista. This sett ingcorrected a corruption problem thatoccurred with some older games thatshould not occur with modern games.

Color:Adjust the overall richness of color by using the Gamma control. To adjust the overall brightness usethe Brightness control, and the overall contrast use the Contrast control.


English

AvivoTM Video:PresetsTo quickly adjust your video settings chooseone of the video presets.Note: These settings will only affect applica-

tions with video overlay support.

Basic ColorUse the AvivoTM Color: Basic option to manu-ally set Gamma, Brightness, Contrast,Saturation, and Tint for video playback.Note:Certain video formats do not support these

adjustments. These settings will onlyaffect applications with video overlaysupport.

Basic QualityYou can control the deinterlacing settings bychecking the Use automatic deinterlacingitem. The bar determines how the two inter-laced video fields are converted into a non-interlaced form.Note: These settings will only affect applica-


- 30 -

Engl

ish


All SettingsThe All Settings page combines all of the princi-pal Video features onto a single page, withoutany preview window, allowing quick accessand adjustment. This page is useful when it isnot necessary to preview the adjusted settingsbecause the effect is already known orunderstood.Note: These settings will only affect applica-


Theater Mode*Use Theater Mode to change the way youview streaming video.Note: These settings will only affect applica-

tions with video overlay support.Extended Desktop Mode is not supportedon systems running Windows Vista.

* This item will available when you connect twomonitors.


English

VPU Recover:VPU Recover is a tool capable of detecting the rare situation when the graphics processor is no longerable to respond to display driver commands. When this occurs, VPU Recover attempts to reset thegraphics processor so that you are able to continue using your computer without interruption or loss ofdata. In most cases, VPU Recover will be able to reset the graphics processor without requiring asystem restart. If the computer cannot recover from a crash, VPU Recover will switch the computerto software rendering mode, allowing you to save any work in progress before restarting the computer.

Enable VPU RecoverPrepare an error report if VPU Recover isactivated, for submission to ATI Technologies.Allows the VPU Recover, once it is activated,to generate an error report that you can send toATI via e-mail.

Note: Because Windows Vista provides the samefunctionality as this option, VPU Recover isnot available on systems running WindowsVista.

ATI Overdrive:Use Overdrive to maximize your viewing experience by dynamically and safely overclocking thegraphics processor and memory. Use the Automated clock configuration utility to obtain the ATIrecommended speeds for the graphics processor clock and video memory clock. Alternatively,manually set these speeds to meet your specific requirements. Finally, Overdrive can be configuredto run when the computer is booted or only when running 3D applications.

Note: If your computer cannot restart after setting ahigher clock speed, press and hold the <Shift>key during system start-up until you hearthree beeps. Once your computer has fullbooted, do not select the Preserve ATI Over-drive settings at logon check box.

- 32 -

Engl

ish


4. Troubleshooting Tips

The following troubleshooting tips may help if you experience problems. Contact your dealeror GIGABYTE for more advanced troubleshooting information.

Check that the card is seated properly in the PCI Express x16 slot.

Ensure that the display cable is securely fastened to the card's display connector.

Make sure that the monitor and computer are plugged in and receiving power.

If necessary, disable any built-in graphics capabilities on your motherboard. Formore information, consult your computer's manual or manufacturer.

(NOTE: Some manufacturers do not allow the built-in graphics to be disabled or tobecome the secondary display.)

Make sure you selected the appropriate display device and graphics card when youinstalled the graphics driver.

Restart your computer. Press the F8 key on your keyboard after system starts up.When the Windows Advanced Options Menu appears, select Safe Mode and pressEnter. After getting into Safe Mode, in Device Manager check whether the driver forthe graphics card is correct.

For more assistance, use the Troubleshooting Guide located in the Windows® Help orcontact your computer manufacturer.

If necessary, adjust your monitor's setting by monitor's adjust panel to make the screenlooks focused, crisp, and sharp. (Please refer to the monitor's manual.)

Appendix- 33 -

English

5. AppendixResolutions and Color Depth Table (In Windows® XP)

Display Maximum Color Depth (bpp)Screen Refresh Rate 8bpp(256 color) 16bpp(65K color) 32bpp(16.7M)Resolution (Hz) Standard mode High mode True mode640 x 480 200800 x 600 2001024 x 768 2001152 x 864 1001280 x 768 851280 x 960 1601280 x 1024 1201440 x 900 601600 x 1200 1001680 x 1050 1001792 x 1344 851800 x 1440 701856 x 1392 751920 x 1080 751920 x 1200 851920 x 1440 752048 x 1536 66

RadeonTM HD 2400 XT Series 2D Single Display Modes

* The table is for reference only. The actual resolutions supported depend on the monitor you use.

RadeonTM HD 2400 XT Series HDTV Display ModesDisplay MaximumScreen Refresh RateResolution (Hz)

480i 640 x 480 30704 x 480 30720 x 480 30

480p 640 x 480 60704 x 480 60720 x 480 60856 x 480 60

720p 960 x 720 601280 x 720 60

1080i 1920 x 1080 30

- 34 -

Engl

ish


vga card gv-rx24t256hp - gigabyte...step 1: found new hardware wizard: video controller (vga...

Documents