vertical turning lathes - bulmakmetal...
TRANSCRIPT
Vertical Twin-Spindle CNC Lathes
Vertical Turning Lathes
Vertical CNC Lathes
1 2
� Photos includes some optional specifications
Vertical Twin-Spindle CNC Lathes
Vertical CNC Lathes
Improve productivity with mid/big flanges
Stable machining of thin and odd-shaped workpieces
Vertical Turning Lathes
3 4
Stableaccuracy
Powerful machining of medium and large box and odd-shaped workpiecesUse of box-type base and column for highly dependable, highly rigid structureStable machining in which the workpiece adheres closely to the chucking surface by its own weight
Wideconstant-powerranges
� A strong, square column is positioned on a large, rigid base with good damping properties, and a highly rigid, reliable structure with wide box ways on both the X and Z axes is used.
� Smooth, stable feed is achieved from low to high speeds with the use of a weight-type counterbalance that is not affected by the feedrate.
Vertical NC lathe Load is vertical
Horizontal NC lathe Prone to runout
SaddleSlideway
Turret
Spindle
Column
Highly rigid structure
� Workpiece closely adheres to chuck reference position with its own weight, to achieve high accuracy, stable machining––from thin workpieces to large-diameter or heavy workpieces.
� Easy and stable chucking is possible even with odd-shaped workpieces for which chucking is difficult. Fixture setups can be simplified and fixture costs reduced.
High-accuracy, stable machining
� Use of a large-diameter, 12 angle turret with margin space makes tooling easy--even for permanent sets.
� The large-diameter coupling enables high accuracy indexing and powerful heavy cutting with strong hydraulic clamps.
Turret
� The headstock is given a flange construction and is solidly fixed to a box-type base, minimizing the effects of thermal deformation and vibration.
� A powerful motor with a wide constant-power range is used for the spindle. Combining this with a big bore spindle enables powerful heavy-duty cutting.
Main spindle
Counterbalance
OSP-P300L� Spindle speed
2,500 min-1
� VAC 22/18.5 kW(30/25 hp)(30 min/cont)
� 657/552 N.m(483/407 ft-lbf)(30 min/cont)
OSP-P300L� Spindle speed
1,250 min-1
� VAC 30/22 kW(40/30 hp)(30 min/cont)
� 2,579/1,891 N.m(1,896/1,390 ft-lbf)(30 min/cont)
V40R / 2SP-V40
V80R / 2SP-V80
OSP-P300L� Spindle speed
2,000 min-1
� VAC 30/22 kW(40/30 hp)(30 min/cont)
� 1,123/823 N.m(826/605 ft-lbf)(30 min/cont)
OSP-P300L� Spindle speed
1,250 min-1
� VAC45/37/30/22 kW(60/50/40/30 hp)(5/10/30 min/cont)
� 3,870/3,182/1,377/1,010 N.m(2,846/2,340/1,013/743 ft-lbf)(5/10/30 min/cont)
V60R / 2SP-V60
V100R
Spindle type
V40 V60 V80 V100R
A2–8 A2–11 A2–11 Flat ø380(14.96)
Outside diameter(OD)
ø120 mm(4.72)
ø160 mm(6.30)
ø200 mm(7.87)
ø200 mm(7.87)
Inside diameter(ID)
ø77 mm(3.03)
ø92 mm(3.62)
ø110 mm(4.33)
ø110 mm(4.33)
mm (in.)
1,000
500
100
50 0.5
1
5
10
20
30
(735)
(40)
(368)
(75)
(37)
(27)
(13)
(7)
(1.3)
(0.7)
(735)
(40)
(368)
(75)
(37)
(735)
(3,676)
(2,206)
(368)
(75)
(37)
(27)
(13)
(7)
(1.3)
(0.7)
(40)
(67)
(27)
(13)
(7)
(1.3)
(0.7)
(735)
(40)
(368)
(75)
(37)
(27)
(13)
(7)
(1.3)
(0.7)
100 320 1,000 1,940 3,000
22kW (30 min)
18.5kW (cont)
657N·m (30 min)
552N·m (cont)
10010 255 1,0001,113
2,000
1,000
500
100
50 0.5
1
5
10
20
3030kW (30 min)
22kW (cont)
1,123N·m (30 min)
823N·m (cont)
10010 250 1,0001,111111
1,250
1,000
500
100
50 0.5
1
5
10
20
3030kW (30 min)
27.5kW
22kW (cont)
1,147N·m (30 min)
2,579N·m (30 min)
840N·m (cont)
1,891N·m (cont)
11110 208 416 1,000833 1,250
1,000
5,000
3,000
500
100
50 0.5
1
5
10
20
30
5045kW (5 min)37kW (10 min)
30kW (30 min)22kW (cont)
3,870N·m (5 min)
3,182N·m (10 min)
1,377N·m (30 min)
1,010N·m (cont)
�Pulley
Machiningsamples
V100R
V60R
Spindle speed
Sp
ind
le t
orq
ue
Mo
tor
out
put
Spindle speed
Sp
ind
le t
orq
ue
Mo
tor
out
put
Spindle speed
Sp
ind
le t
orq
ue
Mo
tor
out
put
Spindle speed
Sp
ind
le t
orq
ue
Mo
tor
out
put
Using main motors with wide constant-power rangesHeadstock with flange construction to minimize effects of thermal deformation and vibration
Simple to mount/dismount odd-shaped work
min-1
kW(hp)
min-1
kW(hp)
min-1
kW(hp)
min-1
kW(hp)
N.m(ft-lbf)
N.m(ft-lbf)
N.m(ft-lbf)
N.m(ft-lbf)
IDOD
5 6
� Chip discharge in any direction to match plant layout––side or rear disposal.
� Variety of chip conveyors to match type of workpiece material.
Chip conveyor (optional)
� Reduced tool compensation setting time � Even inexperienced operators can quickly and accurately set
tool compensation.� Use of all direction, highly accurate touch sensor gives
flexibility in handling all types of tools.
� Smooth chip flow designed base––outstanding chip discharge
� Thorough chip disposal measures with chip flow coolant as standard equipment.
Outstandingchip disposal
Outstanding accessibility
� Chain hoist type device for manual mounting/dismounting of workpiece installed on machine for simpler mounting/dismounting of heavy workpieces.
� Workpiece can easily be attached to chuck reference surface with double switchover between low- and high-speed feed.
Note: Please prepare workpiece lifting hook separately.
� Outstanding spindle accessibility, simple two-handed mounting/dismounting even of large-diameter workpieces.
� Front-skirt operation panel convenient for up-close jobs.� Easy changeover with swiveling pendant operation panel.� Chuck pressure adjustments can also be easily done from
front of machine. � Completely independent operation on two spindles
(2SP-V models).
Operations done from machine front
L
L1
V40.V40R
V60.V60R
V80.V80R
V100R
L
Maximum lifting weight 200 kg (440 lb)
L1 H
490 mm(19.29)
340 mm(13.39)
960 mm(37.80)
600 mm(23.62)
390 mm(15.35)
1,085 mm(42.72)
630 mm(24.80)
440 mm(17.32)
1,150 mm(45.28)
860 mm(33.86)
440 mm(17.32)
1,170 mm(46.06)
HChip conveyor types and applications
Name
Application
Features
Shape
Hinge type Hinge scraper type*Scraper type Magnet scraper type
Magnet
V40R
Adaptablemachines
Freely configurable chip discharge to match plant layoutBase construction for excellent chip disposalOutstanding access to chuckAll operations can be done from front of machine
Huge reduction in setup time with touch setter (auto tool compensation) (optional)
Manual workpiece mount/dismount device (optional)
Various chipconveyors
� For steel
Note: Machine platform may be necessary depending on the type of chip conveyor.
� For castings � For castings � For steel, castings, nonferrous metal
� General use � Magnet scraper more effective for sludge disposal
� Easy maintenance� Blade scraper
� Effective with sludge� Not suited for nonferrous
metals
� Filtration of long and short chips and coolant
Type
Note: Arm extension and retraction is done automatically.
* With drum filter
mm (in.)
Smooth chip flow designed base––outstanding chip discharge
Automation,labor-savings
� Improved machining accuracy � Improved productivity with process-intensive machining
Turning + drilling & end milling all done completely on one machine
7 8
� Because of the separate L/R structures, machining vibration does not affect the other spindle.
� Trouble-free work–Operators simply set the material and remove the completed piece.(Workpiece mounting/dismounting is automatic)
� Handles large workpieces.
1. Stable machine utilization Simple construction for little trouble
2. One operator can handle multiple machines Saves labor and improves productivity
3. Can be adapted to a wide range of production configurations As a cell machine, frees up production line layouts
Radial mill/drill unit
Items2SP-V40
V40R
0.001
2SP-V60V60R
0.001
X, Z, C axes
Millingtool
spindle
Controlled axes
Turret configuration
No. of tools
Spindle speed
Attached bore collet
Motor; OSP
Minimum inputincrementC axis
For V12 multitasking machine specifications
6(Turret station no. 1, 3, 5, 7, 9, 11)
2SP-V80V80R
V100R
0.001 0.001
2,000 2,000 3,000 3,000
ø32(1.26)
ø32(1.26)
ø34(1.34)
ø34(1.34)
5.5(7.5)
5.5(7.5)
min-1
mm(in.)
kW(hp)
deg
Unit
Maximum 6 tools/turret
VS-L simple loader/unloader (optional)
� Manual input, automatic chucking of blanks � Automatic finished work ejector � Accommodates thin workpieces (chucked wall less than 40 mm)
VS auto work ejector (optional)
� Longer robot travels––ideal for linking multi-operation runs.� Use of gantry robot means spindle access is good and setup changes are
simple.
VG robot system (optional)
Features
1. Workpiece conveyor does not require lifting Simply push along on roller conveyor
2. Safety ensured in machining of large workpieces Also outstanding in reducing operator fatigue
3. Ensure machining accuracy The machinist simply mounts the workpiece and checks the setup
Features
Work turnover stand16-P rotary stacker
Gantry robot
2SP-V
Axial mill/drill unit
C axis
C axis
Highproductivity
Zero parts in progress with integrated processing.Raise production efficiency with multitasking specifications.
Multitasking Rotary tool unit mounts
� [ ]: FANUC specifications � Multitasking specs available for one or both spindles.
Two-spindle series: High productivity with double the performance on one machine Semi-auto loader ideal for heavy workpiece runs
Semi-auto loader handles relatively large workpieces safely and reduces operator fatigue
Fully automatic workpiece handling with robot traveling on gantry beam
Multitasking specifications provide powerful process-intensive machining to deal with a wide range of production configurations (optional)
3.5 (4.8)[4(4.8)]
5.5 (7.5)[4(4.8)]
V12
9 10
Max turning diameter Max swing diameterMax turning lengthMax chuck sizeMax workpiece weight
X-axis travel Z-axis travel
Spindle speedSpindle speed rangesType of spindle noseSpindle front bearing dia Spindle bore diaFloor to spindle noseSpindle support
Turret typeOD tool shank dimensionsID tool shank diameter
Cutting feedrateRapid traverse
Spindle drive
Required floor space(width x depth)
Machine height Machine weight
mm (in.)mm (in.)mm (in.)mm (in.)
kg (lb)
mm (in.)mm (in.)
min-1
mm (in.)mm (in.)mm (in.)
mm (in.)mm (in.)
mm/min (ipm)m/min (fpm)m/min (fpm)
kW (hp)kW (hp)
mm (in.)
mm (in.)
mm (in.)kg (lb)kg (lb)
ø400 (15.75)ø500 (19.69)450 (17.72)
ø450 (17.72)300 (660)
400 kg/800 min-1*2
265 (10.43)450 (17.72)
25 to 2,500
A2-8ø120 (4.72)ø77 (3.03)960 (37.80)
ø40, ø50 (1.57, 1.97)
0.001 to 240.0 (0.00004 to 9.45)
VAC 22/18.5 (30/25)AC 22/18.5 (30/25)
1,705 x 2,788(67 x 110)
2,970 x 2,738(116 x 108)
3,040 (119)7,200 (15,840)14,000 (30,800)
�25 (1)
ø610 (24.02)ø700 (27.56)660 (25.98)
ø610 (24.02)500 (1100)
1,000 kg/200 min-1*2
370 (14.57)660 (25.98)
20 to 2,000
ø160 (6.30)ø92 (3.62)
1,085 (42.72)
0.001 to 300.0 (0.00004 to 11.81)
2,015 x 3,134(79 x 123)
3,680 x 3,064(144 x 121)
3,660 (144)9,500 (20,900)18,500 (40,700)
Infinitely variableA2-11
2-point roller bearing
V12
24 (78.74)24 (78.74)
VAC 30/22 (40/30)AC 30/22 (40/30)
OSP-P300L, FANUC 31i-B
ø800 (31.50)ø1,000 (39.37)
840 (33.07)ø910 (35.83)800 (1760)
2,000 kg/200 min-1*2
465 (18.31)840 (33.07)
13 to 1,250
1,150 (45.28)
�25, �32 (1, 1-1/4)ø40, ø50, ø63 (1.57, 1.97, 2.48)
0.001 to 462.0 (0.00004 to 18.19)
2,300 x 3,190(90 x 126)
4,500 x 3,190(177 x 126)
4,065 (160)11,500 (25,300)22,000 (48,400)
ø200 (7.87) ø110 (4.33)
ø1,000 (39.37)ø1,250 (49.21)
890 (35.04)ø1,010 (39.76)1,200 (2640)
2,000 kg/200 min-1*2
565 (22.24)890 (35.04)
13 to 1,250
Flat ø380 (ø14.96)
1,170 (46.06)
�32 (1-1/4)
0.001 to 500.0 (0.00004 to 19.69)
AC 45/37 (60/50)AC 45/37 (60/50)
2,735 x 3,445(107 x 135)
–
3,439 (135)13,000 (28,600)
–
X, Y, ZX-axisZ-axis
OSPFANUC
(2SP-V)
(2SP-V)
Spindle
Turret
� Standard AccessoriesCoolant system
Full enclosure shieldingJack screws, foundation padsWork lamp Tool kit
� Standard SpecificationsFront door interlockLubrication monitor Chuck open/close push button switch
A2-8, 25 to 2500 min-1
22/18.5 kW (30/25)22/18.5 kW (30/25)
V12
290 L (76.6 gal)450 L (105.7 gal)
A2-11, 20 to 2000 min-1
30/22 kW (40/30)30/22 kW (40/30)
V12
400 L (105.7 gal)700 L (184.9 gal)
250 W620 W
�
�
�
�
�
A-1�
A2-11, 13 to 1250 min-1
30/22 kW (40/30)30/22 kW (40/30)
V12
450 L (118.9 gal)800 L (211.4 gal)
Flat ø380, 13 to 1250 min-1
45/37 kW (60/55)45/37 kW (60/55)
V12
450 L (118.9 gal)–
Coolant tank (2SP-V)
Pump motor (2SP-V )Shower/chip flusher (2SP-V )
OSPFANUC
BS 12-HBS 16-HBS 20-HBS 25-HBS 32-H
V40R V60R/80R/100R
OD-I
Capacity
Travel
Spindle
Turret
Feed Axis
Motor
Machine Size
CNC
OD tool
Boring barBoring bar sleeve
Drill sleeveDS MT 1DS MT 2DS MT 3DS MT 4
Drill
V40R V60R/80R/100R
OD-I I
V40R V60R/80R/100R
The types are different for the turning turret tool holder and combination turret tool holder for V40R and 2SP-V40.The turning turret tool holder and combination turret tool holder are the same type for V60 and 2SP-V60, and for V80 and 2SP-V80, V100R, and can be used interchangeably.
T + T: Turning + Turning, T + M: Turning + Multitasking, M + M: Multitasking + Multitasking
Tooling System
Tooling Kit
V40R V60R V80R V100R
V40R V60R V80R V100R
OD-I 25
OD-I 25 turret
OD-I I 25
OD-I I 25 turret
ID-H40
ID-H40 turret
BS12-H40
BS16-H40
BS20-H40
BS25-H40
DS MT 1–H40
DS MT 2–H40
DS MT 3–H40
DS MT 4–H40
Axial mill/drill unit
Radial mill/drill unit
6
3
6
2
2
2
2
1
1
1
1
3
3
3
2
2
2
2
1
1
1
1
2
2
V40R 2SP-V40
12
6
12
4
4
4
4
2
2
2
2
6
3
3
3
6
3
4
4
4
4
2
2
2
2
2
2
6
6
6
4
4
4
4
2
2
2
2
4
4
OD-I 25
OD-II 25
ID-H40
BS12-H40
BS16-H40
BS20-H40
BS25-H40
DS MT 1–H40
DS MT 2–H40
DS MT 3–H40
DS MT 4–H40
Axial mill/drill unit
Radial mill/drill unit
6
3
6
2
2
2
2
1
1
1
1
3
3
3
2
2
2
2
1
1
1
1
2
2
V60R 2SP-V60
12
6
12
4
4
4
4
2
2
2
2
9
6
9
4
4
4
4
2
2
2
2
2
2
6
6
6
4
4
4
4
2
2
2
2
4
4
OD-I 32
OD-I I 32
ID-H50
BS32-H50
Axial mill/drill unit
Radial mill/drill unit
6
3
6
2
3
3
3
2
2
2
V80R/V100R 2SP-V80
12
6
12
4
9
6
9
4
2
2
6
6
6
4
4
4
M + MT + MT + TTurningturret
Multitaskingturret M + MT + MT + TTurning
turretMultitasking
turret
M + MT + MT + TTurningturret
Multitaskingturret
Note:
*3. 30 min/con *4. 5 min/con *5. 10 min/15 min *6. 2SP-V with 2 sets
*6
*6
*3 *3 *3 *4
*3 *3 *3 *5
*1
*3
*3
*3
*3
*4
*5
Machine Specifications
Standard Specifications/Accessories
*1. With chuck *2. Max. workpiece load capacity/spindle speed restriction when spindle speed is restricted
11 12
V40R
V60R
V80R
V100R
H01MA-12(A2-8)H01MA-12(A2-8) H01MA-12(A2-8)
Travel
Trav
el 4
50 (1
7.72
)
40 (1.57)
55 (2.17)ø2
35
ø700 (27.56)
Max turning diameter ø400
ø225
ø485
ø500(19.69)
(15.75)(31.50)
(12.40)
(37.00)
(24.02)
(9.2
5)
(8.86)
(19.
09)
230 (9.06) 230 (9.06)460 (18.11)40
7055
Max blade diameter
280 (11.02)
210 (8.27)
265 Travel 265
198
145
53
100
670
(26.
38)
Trav
el 4
50 (1
7.72
)
Trav
el 4
50 (1
7.72
)
165
130
100
670
(26.
38)
190
3040 (1.57) 55 (2.17)
280 (11.02)
225 (8.86)
Travel 265
25 (0.98) 40 (1.57)
280 (11.02)
240 (9.45)
max
100
150
100
670
(26.
38)
220
ø330 (12.99)
ø400 (15.75) 70
ø420 (16.54)
260
(10.
24)
190
(7.4
8)45
0 (1
7.72
)
55
165
(6.5
0)
OD cutting End face cutting ID cutting
55
ø315
ø650 (25.59)
ø685
ø330
8012
0
250 (9.84)250 (9.84)
500 (19.69)120
30(1.18)
(14.57) (14.57) (14.57)
(1.7
7)
(1.1
8)
(1.38
)(4.
92)
(5.91
)
(6.8
9)
(7.4
8)
(8.6
6)
(6.8
9)(7
.48)
(4.3
3)
440 (17.32)
125
880
(34.
65)
45
360 (14.17)10 (0.39)
440 (17.32)
320 (12.60)50 (1.97)
440 (17.32)
Trav
el 6
60 (2
5.98
)
Trav
el 6
60 (2
5.98
)
Trav
el 6
60 (2
5.98
)
Trav
el 6
60 (2
5.98
)
Travel 370 Travel 370 Travel 370 ø390 (15.35)
ø610 (24.02) 120
ø640 (25.20)
190
110
470
(18.
50)
660
(25.
98)
45 (1
.77)
175
Max turning diameter ø610
120 (4.72)50 (1.97) 320 (12.60)
190
175
H01MA-15 (A2-11) H01MA-15 (A2-11) H01MA-15 (A2-11)
OD toolholderOD-I 25
Endface toolholderOD-II 25
ID toolholderID-H40 (ø40)
OD toolholderOD-I 25
Endface toolholderOD-II 25
ID toolholderID-H40 (ø40)
125
880
(34.
65)
30
880
(34.
65)
125
220
155
78
150
max
125
OD cutting End face cutting ID cutting
Travel 465 (18.30)
40
405 (15.94)60 (2.36)
535 (21.06)
Max turning diameter ø800
ø330
ø685
ø990
ø940
ø650
ø315
OD cutting End face cutting ID cutting
120
255 (10.04)
510 (20.08)120
80
125
45
1040
(40.
94)
Trav
el 8
40 (3
3.07
)15
5
175
100
H01MA-21(A2-11)
Travel 465 (18.30)
455 (17.91)10 (0.93)
535 (21.06)
125
40
1040
(40.
94)
Trav
el 8
40 (3
3.07
)16
0
H01MA-21(A2-11)
Travel 465 (18.30)415 (16.34)50 (1.97)
535 (21.06)
125
125
4520
0m
axm
ax
1040
(40.
94)
Trav
el 8
40 (3
3.07
)20
0
H01MA-21(A2-11)
700 (27.56)128(5.04)
135
ø130
0ø9
05
ø445
ø900
ø1057 (41.61)
ø1295
125
H01MA-36
537 (21.14)28 (1.10) 128 (5.04)
665 (26.18)
1075
(42.
32)
150
185
100
200
125
ø900
H01MA-36
540 (21.26)25 (0.98) 125 (4.92)
665 (26.18)
1075
(42.
32)
150
145
40
100
200
ø900
H01MA-36
95 (3.74)
40
530 (20.87)35 (1.38) 135 (5.31)
665 (26.18)
100
200
ø900
1075
(42.
32)
150
140
45
OD cutting End face cutting ID cutting
70max
200
max
Travel 565 (22.24) Travel 565 (22.24)
Trav
el 8
90 (3
5.04
)
Trav
el 8
90 (3
5.04
)
Travel 565 (22.24)
Trav
el 8
90 (3
5.04
)
Trav
el 8
90 (3
5.04
)
ø1000 (39.37) 135
280
300
310
890
(35.
04)
45 (1
.77)14
0
ø880 (34.65)
ø950 (37.40)ø1060 (41.73)
Trav
el 8
40 (3
3.07
)
ø400 (15.75)
ø800 (31.5) 130
ø810 (31.89)
170
670
(26.
38)
840
(33.
07)
45 (1
.77)15
5
Working Ranges (largest workpiece shape)
OD toolholderOD-I 32
Endface toolholderOD-II 32
ID toolholderID-H50 (ø50)
OD toolholderOD-I 32
Endface toolholderOD-II 32
ID toolholderID-H50 (ø50)
(1.57)
(2.7
6)(2
.17)
(10.43) (10.43) (10.43)
70 (2.76)
(3.9
4)
(3.9
4)
(3.9
4)
(2.1
7)
(1.18
)(1.77
)
(1.77
)(3.
94)
(5.91
)
(5.12
)
(6.5
0)
(7.4
8)
(3.1
5)
(12.
99)(26.97)
(4.7
2)
(8.6
6)
(7.8
0)
(5.7
1)(2
.09)
198
145
53
(7.8
0)
(5.7
1)(2
.09)
198
145
53
(7.8
0)
(5.7
1)(2
.09)
(1.18)30
(2.1
7)
max 45 max 45
Trav
el 4
50 (1
7.72
) (2.76)
(12.40)
(4.72)
120 (4.72)80 (3.15)
90 (3.54)
(4.9
2)
(4.9
2)
(4.9
2)
(3.0
7)(6
.10)
155
78 (3.0
7)(6
.10)
155
78 (3.0
7)(6
.10)
max 35
(4.72)
(25.59)
(3.1
5)
(12.99)
(26.97)
(38.98)
(4.7
2)
(7.8
7)
(4.72)
255 (10.04)
130 (5.12) 80 (3.15)
120 (4.72)
90 (3.54)
(1.57) (4.9
2)
(4.9
2)
(4.9
2)
(4.9
2)
(1.5
7) (1.7
7)(7
.87)
(6.3
0)
(1.7
7) (6
.10)
(6.1
0)
(3.9
4) (6
.89)
175
100
(3.9
4) (6
.89)
175
100
(3.9
4) (6
.89)
(5.12)
(4.3
3)(6
.69)
110
(35.
63)
(35.43)
(51.18
)
(50.98)
(5.3
1)
350 (13.78)350 (13.78)
ø440(17.32)
(17.52)
(4.92
)
(1.57)
(5.91
)
(1.77
)
(5.91
)
(5.91
)
(1.57
)
(2.76
)(4.
92)
(7.87
)
(3.9
4) (7
.87)
(3.9
4) (7
.87)
(3.9
4) (7
.87)
(5.5
1)
(5.5
1)
(5.7
1)
(7.2
8)
(35.43) (35.43) (35.43)
(12.
20)
(11.
02)
(11.
81)
(5.31)
13 14
Spindle high-speed specs
Spindle low-speed specs
Multitasking turret
specifications
Hydraulic power chuck
(solid)
High pressure coolant
Chucking miss detection
Chuck auto open/close confirm
Chuck high/low pressure switch
Chuck open/close pedal
Raised machine height
Manual chuck
Tooling kit
Chip conveyor
Chip bucket
V60R (OSP): 2,500 min-1 45/37 kW (60/50 hp)
55/45 kW (75/60 hp)
V60R (FANUC): 2,500 min-1 45/37 kW (60/50 hp)
V80R (OSP): 1,000 min-1 45/37 kW (60/50 hp)
(FANUC): 600 min-1 30/22 kW (40/30 hp)
V100R (OSP): 750 min-1 55/45 kW (75/60 hp)
V12M, turning tool 6 locations, milling tool 6 locations, spindle brake
V40R, V60R: Milling tool spindle: 2,000 min-1
(FANUC: 4.0 kW, OSP: 3.5 V40 , 5.5 V60 kW)
V80R, V100R: Milling tool spindle: 3,000 min-1
(FANUC: 5.5 kW, OSP: 5.5 kW)
V40R: H01MA-12, H01MA-15, H01MA-18
V60R: H01MA-15, H01MA-18, H01MA-21, H01MA-24
V80R: H01MA-24, H01MA-28, H01MA-32, H01MA-36
V100R: H01MA-36, H01MA-40
(4.0 MPa)
100 mm (3.94 in.)
150 mm (5.91 in.)
Three- jaw scroll chuck
Four-jaw independent chuck
Boring mill jaw chuck (V80, V100R only)
Turning
Multitasking
Rear Hinge type, scraper type, magnet scraper type
Side Hinge type
Auto front cover open/close
Special coolant pump
Shower/chip flushercoolant
Coolant gun
Oil skimmer
Coolant level detection
Chuck air blower
Turret air blower
Air gun
Mist collector
Jib crane
In-process work gauging
Touch setter
AbsoScale
Scale feedback
Coolant temperatureregulator
Automation specs
0.55 kW (0.75)
1.5 kW (2)
0.25 kW (0.3) (both L/R)
Belt system
Lowest level
200 kg
Manual axis
Auto/manual
X axis
X axis
For cooling
Robot
Workpiece pusher(V40, V60)
Workpiece buttingconfirmation
� Spindle speed 2,500 min-1
� AC 45/37 kW (30 min/cont)
(60/50 hp)� 687/565 N.m (30 min/cont)
(505/415 ft-lbf)
V60R / 2SP-V60
� Spindle speed 1,000 min-1
� 45/37 kW (30 min/cont)
(60/50 hp)� 5,370 N.m (30 min)
(3,949 ft-lbf)
V80R / 2SP-V80
� Spindle speed 750 min-1
� 55/45 kW (30 min/cont)
(73/60 hp)� 5,250/4,295 N.m (30 min/cont)
(3,860/3,158 ft-lbf)
V100ROSP-P300L Spindle high-speed specs OSP-P300L Spindle low-speed specs OSP-P300L Spindle low-speed specs
Spindle speed min-1 Spindle speed min-1Spindle speed min-1
Optional Specifications and Accessories
Increasedcapacity
0.88 kW (1.2)
1.21 kW (1.6)
Shows 30-min rating only
Sp
ind
le t
orq
ue
Mot
or o
utp
ut
kW(hp)
Mot
or o
utp
ut
kW(hp)
Mot
or o
utp
ut
kW(hp)
N.m(ft-lbf)
(30 min/cont)
(30 min/cont)w/transmission
A simple function key operation is all it takes to shift a zero offset to either the left or right end of a workpiece. The required zero offset will be calculated automatically based on jaw and workpiece lengths. (when the tool offset is set with reference to the turret tool mounting surface)
Templates like this make it easy to set required jaw shape, tool, and cutting conditions.
Part programming not required to do this.
Easy Operation
OSP-P300L Okuma Sampling Path Control
Operation screen split into four displays
Forming soft jaws Zero offsets
Simultaneous display includes setup work, current position needed in confirming movement in trial machining, NC program, and graphic simulation.
Tool registration
Register data for all of your tools. Since the registered tool data is also used by Okuma auto programming (Advanced One-Touch IGF) and a collision check function (Collision Avoidance System), this screen will complete the entire registering process.
When loading a tool in the machine, simply select it from among the registered tools.ATC manual operation does not require inputting the tool number. Just select the tool from the list and press the function key.
Okuma Control[for Lathes]
1,000
500
100
50
2,000
3,000
5,000
10,000
4,295N.m (cont)
100
188 396 750
310 583
105
84
50 1,000500400
50
20
10
1
0.5
5
30
100
100
180 530340
10
20 80 10815 153 204
1225
5050 100 500 1,000 2,000
2,500625
1,000500
45kW (30 min)
37kW (cont)
687N.m (30 min)
565N.m (cont)
(735)
(1,470)
(2,206)
(3,676)
(7,353)
(368)
(75)
(37)
(40)
(67)
(75)
(27)
(13)
(7)
(1.3)
(0.7)
50
20
10
1
0.5
5
30
100
(40)
(67)
(75)
(27)
(13)
(7)
(1.3)
(0.7)
50
20
10
1
0.5
5
30
100
(40)
(67)
(75)
(27)
(13)
(7)
(1.3)
(0.7)
45kW (30 min)5,250N.m (30 min) 55kW (cont)
45kW (30 min)
2,285N.m (cont)
2,790N.m (30 min)
3,977N.m (30 min)
2,807N.m (30 min)2,105N.m (30 min)
5,370N.m (30 min)
Externalprogramselections
3D
E D E D E D E D
OT-IGF OTMNMLItem
Kit Specs *1
New Operations
Programming
10 sets
50 sets
100 sets
Tool compensation 64 sets
Tool compensation 96 sets
Tool compensation 200 sets
Tool compensation 999 sets
Work coor-dinate systemselect
Tool compen-sation(Std: 32 sets)
Advanced One-Touch IGF-L *2
Advanced One-Touch IGF-L Multitasking *2
Circular threading
Program notes
User task 2 I/O variables, 8 ea
Common variables 1,000 sets (Std: 200 sets)
Thread matching (spindle orientation required)
Threading slide hold (G34, G35)
Variable spindle speed threading (VSST)
Inverse time feed
Real 3-D simulation
Cycle time over check
Load monitor (spindle, feed axis)
Load monitor no-load detection (load monitor ordered)
Tool life management
Tool life warning
Operation end buzzer
Chucking miss detection
NC operation monitor (counter, totaling)
NC work counter (stops at full count with alarm)
Status indicator (triple lamp) Type C [Type A, Type B]
In-process work gauging
Z-axis automatic zero offset by touch sensor
C-axis automatic zero offset by touch sensor
Gauge data output
Post-processwork gauginginterface
Touch setter [M, A]
Monitoring
Count only
Cycle stop
Start disabled
Power ON
Spindle rotation
NC operating
Milling machinespecs
Coordinate convert
Profile generate
Work counters
Hour meters
Measuring
File output
Set levels (5-level, 7-level)
BCD
RS-232-C (dedicated channel)
Included in machine specs
Included in machine specs
Included in machine specs
ItemKit Specs *1 OT-IGF OTMNML 3D
DE D E D E DE
External Input/Output and Communication Functions
Automation/Untended Operation
High-Speed/High-Accuracy Functions
Other Functions
Additional RS-232-C channel
2 channels (Std 1 channel)
DNC link
USB (additional)
Auto power shutoff MO2, alarm
Warmup function (by calendar timer)
Tool retract cycle
Cycle timereduction *3
Pitch error compensation
AbsoScale detection *3
Hi-Cut Pro
Collision Avoidance System (CAS)
One-Touch Spreadsheet
Machining Navi L-g
Harmonic spindle speed control (HSSC)
Spindle dead-slow cutting
Spindle speed setting
Manual cutting feed
Spindle power peak cutting
Short circuit breaker
External M signals [2 sets, 4 sets, 8 sets, ( )]
Edit interlock
OSP-VPS (virus protection system)
DNC-T3
DNC-C/Ethernet
DNC-DT
2 additional ports possible
A (pushbutton) 8 types
B (rotary switch) 8 types
C (digital switch) BCD, 2-digit
C2 (external input) BCD, 4-digit
Type B (machine)
Type C (robot and loader)
Type D
Type E
Operation time reduction
*1. NML: Normal, 3D: Real 3D simulation, OT-IGF: One-Touch IGF, OTM: One-Touch M
E: Economy, D: Deluxe
*2. Real 3-D Simulation included
*3. Engineering discussions required.
Note: Triangle items for M function (milling tool) machines only.
15 16
No. of controlled axes
Interpolation system
Command system
Min/max inputs
Operating panel
Spindle control
Feed
Program input
Compensation
Monitoring
Machine operations
FANUC 31i-BOSP-P300L
No. of controlled axes
Interpolation system
Monitoring
Machine operations
Other functions
More simultaneously controlled axes (X-Z-C axes)*
Fine coordinate interpolation*
Cylindrical interpolation*
Cs contouring*
Graphic display
Tool counter
Work counter
Multi-counter
Hour meters
Status indicator
Tool life management
Abnormal load detection (spindle + feed axes)
Electronic buzzer
Continuous threading
Spindle orientation (1 point, 4 point)
Portable pulse handle
Automatic power shutoff
Circuit breaker
Illumination in control panel
Air conditioning within control panel
Program input
Compensation
Program memorycapacity
More registeredprograms
External program selection
Additional RS-232-C channels
Custom macro
Custom macros, additional common variables
Coordinate selection 6 sets
M spindle rigid tapping
Fixed drilling cycle
Chamfering, corner
Combination fixed cycles I, II
Simultaneous editing of multiple programs
Program restart
Spare M codes (4, 8)
2nd shape tool offset
Pitch error compensation (X-axis, X/Z axes)
No. of tool compensations
99 sets, 200 sets, 499 sets
999 sets, 2,000 sets
128 KB (320 m)
256 KB (640 m)
512 KB (1,280 m)
1 MB (2,560 m)
2 MB (5,120 m)
4 MB (10,240 m)
8 MB (20,480 m)
125 sets
250 sets
500 sets
*Required with multitasking specs
STANDARD SPECIFICATIONS STANDARD SPECIFICATIONS
OPTIONAL SPECIFICATIONSOPTIONAL SPECIFICATIONS
X, Z axes simultaneously (2SP: X, Z axes simultaneously x 2)
Positioning, straight line, taper, arc, threading
Parallel absolute incremental command
Both X, Z axes 0.001, ±99999.999 mm, decimal point input
10.4 in color TFT, display language: English / Japanese
Spindle control 4-digit direct command, constant peripheral speed control, spindle orientation (1 point M19), spindle override 50 to 150%
Feed rate override 0 to 200%, pulse handle
Program memory capacity 64KB (160m) 2SP-V R/L total is 64KB (160m), no. of registered programs: 63 (2SP-V R/L total is 125),
expansion program editing, RS232C input/output interface, programmable data input, program protection key switch
Nose-radius comp, no of tool compensations: 32 (2SP-V R/L total is 32), tool dimensions/wear compensation, tool offset, counter input,
direct input of measured tool compensation
Operating time, no. of parts display, electronic buzzer
AI contouring control I
Basic Specs
Operations
Communications/NetworksHigh speed/accuracy
Turning: X, Z simultaneous 2-axis, Multitasking: X, Z, C simultaneous 3-axisOSP full range absolute position feedback (zero point return not required)8-digit decimal, ±99999.999 to 0.001 mm (±3937.0078 to 0.0001 in.),0.001˚ Decimal:1 µm, 10 µm, 1 mm (0.0001,1 in.) (1˚, 0.01˚, 0.001˚)Override: 0 to 200%Direct spindle speed commands (S4) override 50 to 200%Constant cutting speed, optimum turning speed designateTool selection: 32 sets, tool offset: 32 sets15-inch color display operational panel, touch panelAutomatic diagnostics and display of program, operation, machine, and NC system problemsProgram storage: 2 GB, operation buffer: 2 MBProgram management, edit, multitasking, scheduled programs, fixed cycles, special fixed cycles, tool nose R compensation, fixed drilling cycles, arithmetic functions, logic statements, trig functions, variables, branch statements, auto programming (LAP4), programming help“Single-mode operation” to complete a series of operationsAdvanced operation panel/graphics facilitate smooth machine controlMDI, manual (rapid traverse, manual cutting feed, pulse handle), load meter, operations help, alarm help, sequence, return, manual interrupt & auto return, threading slide hold, data I/O, spindle orientation (electric)Machining Management: machining results, machine utilization, fault data compile & report, external outputUSB ports, Ethernet, RS232C interface (1 channel)Hi-G control
ControlPosition feedbackMin / Max inputs
FeedSpindle control
Tool compensationDisplaySelf-diagnosticsProgram capacityPrograming
Easy Operation
MachineoperationsMacMan
17 18
V40R 2SP-V40
2SP-V60
2SP-V80
V60R
V80R
V100R
6751,070 440
200
150 900
836
485317 44
700
846
640 620
2,560 (100.79)2,655
2,450 (96.46)285
1,55
054
03,
360
(132
.28)
79 (3
.11)1,525 680
3,43
9 (1
35.3
9)
2,735 (107.68)
5752,060 (81.10) 810 (31.89)
605150 960
675 (26.57) 2,060 (81.10)2,735 (107.68)
700 (27.56)
995 (39.17)
1,200 4251,715
900
(35.
43)
450 565
1,60
0 (6
2.99
)
2,65
0 (1
04.3
3)38
0
840
(33.
07)
1,81
0 (7
1.26
)62
0 (2
4.41
)10
5 (4
.13)
2,09
545
0
355
965
715
260
735 38
0
635
965
825
150
1,68
0
2,95
5 (1
16.3
4)63
5 (2
5.00
)
4,13
2 (1
62.6
8)20
2
1015
1,17
0
4953,445 (135.63)
Chip conveyor
Coolant tank
Power source inlet
(optional)
Chip conveyor
(optional)
Lubricating oil tank (w/transmission specs only)
(25)
(820
) (32
.28)
10 (0
.39)
4,06
5 (1
60.0
4)
1,306 (51.42)944 (37.17)
2,250 (88.58)
550
3,21
5 (1
26.5
7)84
0 (3
3.07
)
50 (1.97)
1,34
0 (5
2.76
)1,
600
(62.
99)
430
1,770185 800
2,755 (108.46) (17.13)
3,190 (125.59)
440
Lube unit
1,15
0
100
(3.9
4)52
5 (2
0.67
)
365
1,51
5 (5
9.65
)
890
1,28
4 (5
0.55
)
435
625
500
210
3,42
4 (1
34.8
0)
2,250 (88.58)1,900
110 760
1,90
019
098
048
552
867
060
550
Max. swing ø1000
8950
587
6
330
Power source inletLube unit
43555
Air supplyinlet Rc 3/8
Spindle
2,75
5 (1
08.4
6)
551,
900
(74.
80)
800
(31.
50)
570
(22.
44)
3,42
5 (1
34.8
4)3,
860
(151
.97)
450
595
(23.
43)
(10.43
)(2
65)
2,300 (90.55)912
(860)
(33.8
)
788
250
590
30505285
125
830
350750 280
50 (1.97)632
(190
) (7.
48)
535
545
220
855
595
60
608
(23.
94)
2,78
7 (1
09.7
2)75
2.5
(26.
63)
1,73
0 (6
8.11
)50
0(4
2.19
)1,
071.
593
.5(3
.68)
940
1,73
050
2,72
0 (6
8.11
)1,
026
(40.
39)
637
(25.
08)
355
550
175
358
243
(9.5
7)4,
626
(182
.16)
1,920 (75.59)
435887.5
275 1005 29026030
677.5
80
1,570 (61.81)270
290510670100
1,840 (72.44) 995 (39.17)
685
(26.
97)
2,96
5 (1
16.7
3)10
(0.3
9)
3,66
0 (1
44.0
9)
3,17
4 (1
24.9
6)
525
(20.
67)
1,36
4 (5
3.70
)
1,35
0 (5
3.15
)1,
320
(51.
97)
175 (6.90) 1,840 (72.44)
4142,720 (107.09)
3,134 (123.39)
210 210390 5951,180
1,570 940635400
1,570 (61.81)160 (6.30)
1,08
5 (4
2.72
)
Export transformerCoolant tank
Spindle R
Power source inlet
Lube unit
125
270
400
420
2,61
0 (1
02.7
6)10
(0.3
9)
3,04
0 (1
19.6
9)
2,81
0 (1
10.6
3)52
5 (2
0.67
)1,
355
(53.
35)
1,30
0 (5
1.18
)
1,250 (49.21)235220
1,705 (67.13)
635300
3882,400 (94.49)
2,788 (109.76)
150490 610.5340 1,010210
960
(37.
8)
485
440
221
403
1,23
0 (4
8.43
)60
(2.3
6)16
043
8
1,45
0 (5
7.09
)60
093
.5
900
1450
50
2,40
0 (9
4.49
)92
4 (3
6.38
)63
6 (2
5.04
)
355
175
195
230
4,19
0 (1
64.9
6)
900
1,590 (62.60)
385798
220 860 170
522
115 (4.53)
1,250 (49.21)235
170460520100
1,485 (58.46) 1,010 (39.76)220
Chip conveyor(optional)
Chip conveyor(optional)
Coolant tank
Chip bucket(optional)
Chip bucket(optional)
Chip bucket(optional)
5 adjusting bolts5 anchor bolts
6 adjusting bolts6 anchor bolts
7 adjusting bolts7 anchor bolts
Spindle R
Power source inlet
Chip conveyor(optional)
Lube unit
Max. swing ø500
85
300
420
2,61
0 (1
02.7
6)10
(0.3
9)
3,04
0 (1
19.6
9)
2,81
0 (1
10.6
3)61
0 (2
4.02
)1,
270
(50.
00)
1,32
0 (5
1.97
)1,
300
(51.
18)
1,250 (49.21)1,250 (49.21)235
2,970 (116.93)
635600388
2,350 (92.52)
2,738 (107.80)
150490 610.5340 1010210
960
(37.
80)
880
440
221
403
1,23
060
160
438
1,45
0 (5
7.09
)92
4 (3
6.38
)
3,06
7.5
(120
.77)
600
(23.
62)
575
(22.
64)
93.5
(0.3
7)
850
1,45
050
2,35
0 (9
2.52
)68
6 (2
7.01
)23
0
4,14
0 (1
62.9
9)
850
2,855 (112.40)
3851,157
440 860 170170
521.5
115
2352352,500 (98.43)
170170 460520 200
2,970 (116.93) 1,010 (39.76)
385521.5
774 (30.47)
860
85
460 520
600
535
550
220
545
855
595
3,35
0 (1
31.8
9)
465.
51,
730
(68.
11)
500
755
(29.
72)
95 (3
.74)60
220
870
1,73
050
2,65
0 (1
04.3
3)71
0 (2
7.95
)20
6 (8
.11)
4,54
0 (1
78.7
4)
3,600 (141.73)
4351,455
290 290260
1005 550
677.5
4040 (1.57)
3,140 (123.62)3,680 (144.88) 960 (37.80)960 (37.80)
270270670670 510 290290 200
800
435677.5
3,17
4 (1
24.9
6)61
0 (2
4.02
)1,
279
(50.
35)
1,55
0 (6
1.02
)1,
320
(51.
97)
4142,650 (104.33)
3,064 (120.63)
210 210390 5951180
1,570 870
1,08
5 (4
2.72
)
1005
685
(26.
97)
2,96
5 (1
16.7
3)10
(0.3
9)
3,66
0 (1
44.0
9)
3,680 (144.88)
8001,570 (61.81)1,570 (61.81)
270270
125
510
45°
450
Lube unit
10 (0
.39)
4,06
5 (1
60.0
4)3,
215
(126
.57)
840
(33.
07)
1,306 (51.42)944 (37.17)944 (37.17)1,306 (51.42)
4,500 (177.17)
1,100
1,15
0 (4
5.28
)
100
(3.9
4)61
0
280
1,43
0 (5
6.30
)
890
1,28
4 (5
0.55
)
1,34
0 (5
2.76
)1,
600
(62.
99)
185 1,770
3,190 (125.59)
800
2,755 (108.46)435
440
2,75
5 (1
08.4
6)80
01,
900
595
(23.
43)
551,
065
(41.
93)
4,35
5 (1
71.4
6)
570
4,500 (177.17)850 (33.46) 850 (33.46)
3503,800 (149.61)
350
280 750 760 220 760 750 280
1100
1,90
019
098
048
552
867
059
010
060
8950
587
6
330
Exporttransformer
43555
3,86
0 (1
44.8
8)3,
350
(131
.89)
75 (2
.95)
450450530
250
590
530
250
30
830
Max. swing ø1000
505570505830
30
250
125
4,000 (157.48)
2,040
(265
) (190
)
OSP-P300L OSP-P300L
OSP-P300L
OSP-P300L
OSP-P300L
OSP-P300L
OSP-P300L
Dimensional and Installation Drawings
Max. swing ø700
Chip bucket(optional)
Chip conveyor(optional)
Chip conveyor(optional)
Chip conveyor(optional)
Chip bucket(optional)
Chip bucket(optional)
Chip conveyor(optional)
Chip conveyor(optional)
Coolant tank
Chip bucket(optional)
10 adjusting bolts10 anchor bolts
Power source inlet
Lube unit
Chip conveyor(optional)
Coolant tank
Chip bucket(optional)
Power source inlet
Lube unit
Chip conveyor
(optional)
Chip bucket(optional)
Power source inlet
Lube unit
Spindle RSpindle L
Max. swing ø500
Chip conveyor(optional)
Chip bucket(optional)
Spindle RSpindle L
Max. swing ø700
Spindle RSpindle L
14 adjusting bolts14 anchor bolts
12 adjusting bolts12 anchor bolts
Air supplyinlet Rc 3/8
Chip bucket(optional)
Chip bucket(optional)
Chip conveyor
(optional)
(8.66) (15.28)(9.25)
(16.
54)
(9.0
6)
(8.66)
(9.25)
(23.
62)
(3.6
8)
(17.
24)
(16.30)
(19.
69)
(10.63)
(19.69)
(17.
13)
(24.88)
(35.91)
(19.49)
(14.
96)
(7.87)
(7.9
5)
(9.25)235(9.25)
(16.
54)
(15.28)
(9.0
6)
(9.25)236(9.29)
(9.25)
(10.63) (10.63)(16.30)
(19.
69)
(18.
33)
(10.63) (10.63)
(24.
02)
(35.
04)
(17.13)
(10.
43)
(9.84)250
(9.84)
(17.
13)
(13.78) (13.78)
(10.63)
(22.64)
(6.3
0)
(11.22)
This product is subject to the Japanese government Foreign Exchange and Foreign Trade Control Act with regard to security controlled items; whereby Okuma Corporation should be notified prior to its shipment to another country.
, OGUCHI-CHO, NIWA-GUN, AICHI 480-0193, JAPAN • TEL (0587) 95-7825 • FAX (0587) 95-6074
To protect your factory and equipment from fire and assure continued safe operation, observe the following fire safety precautions whenever you operate machinery. Whenever possible, avoid the use of oil-based coolants for cutting operations. Sparks caused by hot chips, tool friction, and grinding can cause fires. Always observe the following safety measures to ensure safe operation when machining flammable materials or when performing dry machining.
Before machining any material designated by law as a flammable substance, e.g., plastic, rubber, wood, acquaint yourself with the special characteristics of the material in terms of fire prevention, and observe the precautions given in (2) above to ensure safe operation. Example: When machining magnesium, there is a danger that magnesium chips and water-soluble coolants will react to produce hydrogen gas, resulting in an explosive fire if any chip should ignite.
Dry machining is a fire hazard because workpieces, tools, and chips are not cooled. To ensure safe operation, do not place any flammable objects near the machine and do not allow chips to over accumulate. In addition, be sure to check cutting tools to make sure of their service life and the condition of the tool edge, and observe the precautions regarding oil-based coolants given in (2) above.
(1) Use nonflammable cutting fluid coolant. (2) When the use of an oil-based coolant is unavoidable:
Before you begin machining, check cutting tools to make sure of their service life and the condition of the tool edge, and choose cutting conditions that will not cause a fire. Periodically clean the coolant filter to maintain sufficient coolant discharge, and frequently verify that coolant is discharging normally. Take measures to control the outbreak of fire: Place a fire extinguisher near the machine, have an operator constantly monitor operation, and install an automatic fire extinguishing system. Do not place flammable materials near the machine.Do not allow chips to over accumulate. Periodically clean the inside of the machine and the area surrounding it.Check that the machine is operating normally. Never run the machine unattended. Since an automatic fire extinguishing system and other peripherals are needed for grinding operations, please let us know as soon as possible if you plan to perform such operations.
Fire Safety Precautions
1. Oil-based coolant
2. Precautions regarding machining of potentially flammable materials
3. Dry machining
•
•
•
•
•
•
•
•
•
� The sp
ecifications, illustrations, and d
escriptions in this b
rochure vary in different m
arkets and
are subject to change w
ithout notice.P
ub N
o.V series-E
-(6a)-200 (Nov 2013)
When using O
kuma p
roducts, alw
ays read the safety p
recautionsm
entioned in the instruction m
anual and attached
to the prod
uct.
When using Okuma products, always read the safety precautionsmentioned in the instruction manual and attached to the product.
Vertical T
urning Lathes
Vertical CN
C Lathes
Vertical Twin-S
pindle CN
C Lathes