verified contractor guide v2 final · verified contractor guide p| 1300 133 950 e|...
TRANSCRIPT
VERIFIED CONTRACTOR GUIDE
P| 1300 133 950 E| [email protected] W| www.verified.com.au V3JUL18
Verified captures field data using your smart device. This guide will walk you through the steps to capture and record relevant information associated with the work being performed. This guide will demonstrate how easy it is to use. To start, locate the QR Code on site.
STEP 1
Open your browser and navigate to: verified.com.au/vi § Enter Your Mobile Number & PIN
‘Allow’ access to camera & location when prompted
STEP 2
§ Scan QR Code
STEP 3
§ Select the Service you are performing
STEP 4
§ Select all Frequencies or select Repair § Select Continue
VERIFIED CONTRACTOR GUIDE
P| 1300 133 950 E| [email protected] W| www.verified.com.au V3JUL18
STEP 5 Complete the following details:
§ Enter a Work Order number if applicable § Have you completed all required tasks? Select Yes or No § Take a clear photo of the service docket
Activity/System Failure:
§ Select one or multiple if applicable
If problem exists:
§ Enter the details of the failure § Take a photo of the most critical defect
§ Have all defects been rectified? Select Yes or No § Enter any additional comments if applicable § Sign in the space provided § Select Continue
STEP 6
A Confirmation code will appear
Have you completed all tasks?
§ No – will return you to the service selection menu. § Yes – will direct you to Checkout
STEP 7
§ Scan QR Code to checkout
You’re Done The process is now complete; all information has been successfully captured. Thanks for using Verified.