verified components list - aamanet.org · aama certification program verified components list...

19
AAMA CERTIFICATION PROGRAM VERIFIED COMPONENTS LIST October 1, 2013 Page 1 of 19 © 2013 American Architectural Manufacturers Association. All rights reserved. This material is protected by all current copyright laws. No portion of this document may be reproduced in any form or by any means without obtaining express written authorization from the American Architectural Manufacturers Association. American Architectural Manufacturers Association, 1827 Walden Office Square, Suite #550, Schaumburg, IL 60173 Phone: (847) 303-5664 OCTOBER 1, 2013 This list is comprised of those manufacturers of window and door components for whom Associated Laboratories, Inc. (ALI; AAMA’s independent validator) has on file a current test report from an AAMA Accredited Laboratory or Approved Component Laboratory indicating that the samples submitted for test are in full compliance with the applicable specification. Testing shall be conducted by an AAMA-accredited independent full-service laboratory or approved Component Lab which is approved for the specification(s) for which the component is listed. Test reports are valid for 18 months from the test report’s completion date, indicated on this report by brackets [ ]. AAMA does not certify individual components. Company names in Bold Face Type are AAMA Category 1 members. Part One Components of Certified Windows and Doors: This list is presented as a service to indicate component test reports on file with the validator for use in window and door certification. If a supplier’s product(s) is not included in Part One, the product(s) may not be used in a window or sliding glass door labeled in the AAMA Certification Program until ALI receives a current test report from an AAMA Accredited Laboratory or Approved Component Laboratory. Part Two Materials and Components Used for Installation: These manufacturers have voluntarily had their products tested, validated, and listed as meeting the requirements of the AAMA specification or standard as indicated. Part One Components of Certified Windows and Doors Listings in this section indicate that the Applicator has applied and tested a coating in compliance with the appropriate AAMA specification. AAMA verifies that these application lines have on file tests indicating the ability to correctly apply coatings required in the AAMA Certification Program. (Only those applicators indicated by an asterisk (*) have completed outdoor exposure testing.) At this time, specific paint coatings are not included as part of the AAMA Verified Components Program. In order for an applicator to be listed in the AAMA Verified Components Program, they must be coating commercially available fenestration or building products. AAMA 2603-13 (PIGMENTED ORGANIC COATINGS) ASTRO SHAPES INC. (OH) [05/23/12] KEYMARK CORPORATION (FL) [06/27/12] KEYMARK CORPORATION (FL) [01/03/13] KEYMARK CORPORATION (NY) [07/24/13] SAPA EXTRUSIONS, INC. (CANADA) [04/04/12] SAPA EXTRUSIONS, INC. (GA) [04/16/12] SAPA EXTRUSIONS, INC. (OR) [03/28/12] SAPA EXTRUSIONS, INC. (SD) [01/03/13] TROJAN POWDER COATING CO. (FL) [07/31/12] TROJAN POWDER COATING CO. (NY) [05/01/13] ALUMINIO TEXCOCO, S.A. DE C.V. (MEXICO) [08/27/12] ASCEND CUSTOM EXTRUSIONS, LLC (TX) [04/19/12] BonL MANUFACTURING CO. (TN) [07/23/13] BRT EXTRUSIONS (OH) [05/01/13] CRYSTAL FINISHING (WI) [04/29/13] EXTRUDERS, INC. (TX) [06/21/12] FRONTIER ALUMINUM (MEXICO) [05/22/13] GUANGDONG LUOXIANG ALUMINUM CO. (CHINA) [05/31/12] GUANGDONG XINWEI ALUMINUM PRODUCTS CO., LTD. (CHINA) [06/16/12] JIANGYIN EAST-CHINA ALUMINUM TECH. CO., LTD. (CHINA) [08/06/13] MI METALS (AZ) [06/21/12] PANASIA ALUMINUM CHINA, LTD. (CHINA) [02/15/13] PROFILE EXTRUSION COMPANY (GA) [05/23/12] SIERRA ALUMINUM (CA) [12/03/12] TAISHAN CITY KAM KIU ALUMINUM (CHINA) [08/27/12] WESTERN EXTR2USIONS (TX) [05/30/12] AAMA 2604-13 (HIGH PERFORMANCE ORGANIC COATINGS) ASTRO SHAPES INC. (OH) [07/17/12] BLOMBERG WINDOW SYSTEMS (CA) [04/15/13] KEYMARK CORPORATION (FL) [06/07/12] KEYMARK CORPORATION (NY) [09/24/13] LIAO NING ZHONG WANG GROUP (CHINA) [05/31/12] TROJAN POWDER COATING CO. (FL) [10/04/12] TROJAN POWDER COATING CO. (NY) [07/08/13] ALUMINIO TEXCOCO, S.A. DE C.V. (MEXICO) [10/29/12] BonL MANUFACTURING CO. (TN) [09/24/13] DIGGER SPECIALTIES (IN) [07/09/13] EXTRUDERS, INC. (TX) [06/30/12] PROFILE EXTRUSION COMPANY (GA) [07/23/12] SIERRA ALUMINUM (CA) [02/05/13] THERMAL WINDOWS (OK) [01/21/13] WESTERN EXTRUSIONS (TX) [03/05/13] VERIFIED COMPONENT LIST AAMA CERTIFICATION PROGRAM PAINT APPLICATORS

Upload: doanque

Post on 06-May-2018

242 views

Category:

Documents


6 download

TRANSCRIPT

Page 1: Verified Components List - aamanet.org · AAMA CERTIFICATION PROGRAM VERIFIED COMPONENTS LIST October 1, 2013 ... American Architectural Manufacturers Association, 1827 Walden Office

AAMA CERTIFICATION PROGRAM VERIFIED COMPONENTS LIST

October 1, 2013

Page 1 of 19

© 2013 American Architectural Manufacturers Association. All rights reserved. This material is protected by all current copyright laws. No portion of this document may be reproduced in any form or by any

means without obtaining express written authorization from the American Architectural Manufacturers Association.

American Architectural Manufacturers Association, 1827 Walden Office Square, Suite #550, Schaumburg, IL 60173 Phone: (847) 303-5664

OCTOBER 1, 2013

This list is comprised of those manufacturers of window and door components for whom Associated Laboratories, Inc. (ALI; AAMA’s

independent validator) has on file a current test report from an AAMA Accredited Laboratory or Approved Component Laboratory

indicating that the samples submitted for test are in full compliance with the applicable specification. Testing shall be conducted by an

AAMA-accredited independent full-service laboratory or approved Component Lab which is approved for the specification(s) for which

the component is listed. Test reports are valid for 18 months from the test report’s completion date, indicated on this report by brackets [

]. AAMA does not certify individual components. Company names in Bold Face Type are AAMA Category 1 members.

Part One – Components of Certified Windows and Doors: This list is presented as a service to indicate component test reports on file

with the validator for use in window and door certification. If a supplier’s product(s) is not included in Part One, the product(s) may not

be used in a window or sliding glass door labeled in the AAMA Certification Program until ALI receives a current test report from an

AAMA Accredited Laboratory or Approved Component Laboratory.

Part Two – Materials and Components Used for Installation: These manufacturers have voluntarily had their products tested,

validated, and listed as meeting the requirements of the AAMA specification or standard as indicated.

Part One

Components of Certified Windows and Doors

Listings in this section indicate that the Applicator has applied and tested a coating in compliance with the appropriate AAMA

specification. AAMA verifies that these application lines have on file tests indicating the ability to correctly apply coatings required in

the AAMA Certification Program. (Only those applicators indicated by an asterisk (*) have completed outdoor exposure testing.) At this

time, specific paint coatings are not included as part of the AAMA Verified Components Program. In order for an applicator to be listed

in the AAMA Verified Components Program, they must be coating commercially available fenestration or building products.

AAMA 2603-13 (PIGMENTED ORGANIC COATINGS)

ASTRO SHAPES INC. (OH) [05/23/12] KEYMARK CORPORATION (FL) [06/27/12]

KEYMARK CORPORATION (FL) [01/03/13]

KEYMARK CORPORATION (NY) [07/24/13] SAPA EXTRUSIONS, INC. (CANADA) [04/04/12]

SAPA EXTRUSIONS, INC. (GA) [04/16/12]

SAPA EXTRUSIONS, INC. (OR) [03/28/12]

SAPA EXTRUSIONS, INC. (SD) [01/03/13]

TROJAN POWDER COATING CO. (FL) [07/31/12]

TROJAN POWDER COATING CO. (NY) [05/01/13] ALUMINIO TEXCOCO, S.A. DE C.V. (MEXICO) [08/27/12]

ASCEND CUSTOM EXTRUSIONS, LLC (TX) [04/19/12] BonL MANUFACTURING CO. (TN) [07/23/13]

BRT EXTRUSIONS (OH) [05/01/13]

CRYSTAL FINISHING (WI) [04/29/13] EXTRUDERS, INC. (TX) [06/21/12]

FRONTIER ALUMINUM (MEXICO) [05/22/13]

GUANGDONG LUOXIANG ALUMINUM CO. (CHINA) [05/31/12] GUANGDONG XINWEI ALUMINUM PRODUCTS CO., LTD.

(CHINA) [06/16/12] JIANGYIN EAST-CHINA ALUMINUM TECH. CO., LTD. (CHINA)

[08/06/13]

MI METALS (AZ) [06/21/12] PANASIA ALUMINUM CHINA, LTD. (CHINA) [02/15/13]

PROFILE EXTRUSION COMPANY (GA) [05/23/12]

SIERRA ALUMINUM (CA) [12/03/12] TAISHAN CITY KAM KIU ALUMINUM (CHINA) [08/27/12]

WESTERN EXTR2USIONS (TX) [05/30/12]

AAMA 2604-13 (HIGH PERFORMANCE ORGANIC COATINGS)

ASTRO SHAPES INC. (OH) [07/17/12]

BLOMBERG WINDOW SYSTEMS (CA) [04/15/13]

KEYMARK CORPORATION (FL) [06/07/12]

KEYMARK CORPORATION (NY) [09/24/13]

LIAO NING ZHONG WANG GROUP (CHINA) [05/31/12]

TROJAN POWDER COATING CO. (FL) [10/04/12] TROJAN POWDER COATING CO. (NY) [07/08/13]

ALUMINIO TEXCOCO, S.A. DE C.V. (MEXICO) [10/29/12]

BonL MANUFACTURING CO. (TN) [09/24/13]

DIGGER SPECIALTIES (IN) [07/09/13] EXTRUDERS, INC. (TX) [06/30/12]

PROFILE EXTRUSION COMPANY (GA) [07/23/12]

SIERRA ALUMINUM (CA) [02/05/13] THERMAL WINDOWS (OK) [01/21/13]

WESTERN EXTRUSIONS (TX) [03/05/13]

VERIFIED COMPONENT LIST AAMA CERTIFICATION PROGRAM

PAINT APPLICATORS

Page 2: Verified Components List - aamanet.org · AAMA CERTIFICATION PROGRAM VERIFIED COMPONENTS LIST October 1, 2013 ... American Architectural Manufacturers Association, 1827 Walden Office

AAMA CERTIFICATION PROGRAM VERIFIED COMPONENTS LIST

October 1, 2013

Page 2 of 19

© 2013 American Architectural Manufacturers Association. All rights reserved. This material is protected by all current copyright laws. No portion of this document may be reproduced in any form or by any

means without obtaining express written authorization from the American Architectural Manufacturers Association.

American Architectural Manufacturers Association, 1827 Walden Office Square, Suite #550, Schaumburg, IL 60173 Phone: (847) 303-5664

AAMA 2605-13 (SUPERIOR PERFORMING ORGANIC COATINGS)

ASTRO SHAPES INC. (OH) [09/14/12]

KEYMARK CORPORATION (FL) [07/23/12]

KEYMARK CORPORATION (NY) [08/07/12]

SAPA EXTRUSIONS, INC. (GA) [08/01/12]

SAPA EXTRUSIONS, INC. (SD) [02/27/13] ALUMINIO TEXCOCO, S.A. DE C.V. (MEXICO) [12/12/12]

CRYSTAL FINISHING (WI) [08/06/13]

DIGGER SPECIALTIES (IN) [08/23/13] EXTRUDERS, INC. (TX) [09/09/13]

SIERRA ALUMINUM (CA) [03/18/13]

WESTERN EXTRUSIONS (TX) [08/17/12]

AAMA 611-12 (ANODIZED ARCHITECTURAL ALUMINUM)

KEYMARK CORPORATION (NY) CLASS I BRONZE [10/01/13]

KEYMARK CORPORATION (NY) CLASS I CLEAR [10/01/13]

KEYMARK CORPORATION (NY) CLASS II BRONZE [07/09/13] KEYMARK CORPORATION (NY) CLASS II CLEAR [07/09/13]

LINETEC (WI) CLASS I BRONZE [08/01/12]

LINETEC (WI) CLASS I CLEAR [06/21/13]

LINETEC (WI) CLASS I CLEAR [07/29/13]

LINETEC (WI) CLASS II CLEAR [05/02/12]

BonL MANUFACTURING CO. (TN) CLASS I BRONZE [09/24/13] BonL MANUFACTURING CO. (TN) CLASS II CLEAR [07/10/13]

SIERRA ALUMINUM (CA) CLASS I BRONZE [02/06/13]

SIERRA ALUMINUM (CA) CLASS II CLEAR [11/16/12]

AAMA 613-13 (ORGANIC COATINGS ON PLASTIC PROFILES)

COLORCOAT, INC. (CA2) [04/29/13]

COLORCOAT, INC. (OH) [08/06/12]

COLORCOAT, INC. (OH) [02/06/13]

COLORCOAT, INC. (OH) [02/13/13]

COLORCOAT, INC. (OH) [05/08/13]

COLORCOAT, INC. (OR) [04/11/13]

JELD-WEN, INC. (CA) [05/09/13]

JELD-WEN, INC. (OR) [07/09/12]

JELD-WEN, INC. (OR) [03/20/13]

MILGARD MANUFACTURING, INC. (CA) [09/11/13]

MILGARD MANUFACTURING, INC. (OR) [01/04/13]

SIMONTON WINDOWS (CA) [08/27/12]

SIMONTON WINDOWS (WV) [10/19/12]

TROJAN POWDER COATING CO. (FL) [08/07/13]

TROJAN POWDER COATING CO. (NY) [08/23/12]

EVERHART PAINTING LIMITED (WA) [05/10/13]

MGM INDUSTRIES (TN) [03/19/13]

PARADIGM WINDOWS (ME) [07/02/13] ROSATI WINDOWS (OH) [04/19/12]

AAMA 614-13 (HIGH PERFORMANCE ORGANIC COATINGS ON PLASTIC PROFILES)

COLORCOAT, INC. (OH) [05/08/13]

AAMA 615-13 (SUPERIOR PERFORMING ORGANIC COATINGS ON PLASTIC PROFILES)

COLORCOAT, INC. (OH) [08/06/12]

COLORCOAT, INC. (OH) [04/16/13]

COLORCOAT, INC. (OH) [05/29/13]

COLORCOAT, INC. (OH) [08/23/13]

COLORCOAT, INC. (OR) [07/18/13]

TROJAN POWDER COATING CO. (NY) [10/3/12]

AZCOR, INC. (CANADA) [07/11/13]

EVERHART PAINTING LIMITED (WA) [08/14/13]

AAMA 623-10 (ORGANIC COATINGS ON FIBER REINFORCED THERMOSET PROFILES)

COMFORT LINE, LTD. (OH) [06/13/12]

INLINE FIBERGLASS (CANADA) [09/11/13]

MILGARD MANUFACTURING, INC. (WA) [05/07/12]

TECTON PRODUCTS (ND)* (Ultrex®) [09/17/13]

AAMA 624-10 (HIGH PERFORMANCE ORGANIC COATINGS ON FIBER REINFORCED

THERMOSET PROFILES)

TECTON PRODUCTS (ND) (Ultrex®) [09/17/13]

AAMA 625-10 (SUPERIOR PERFORMANCE ORGANIC COATINGS ON FIBER REINFORCED

THERMOSET PROFILES)

TECTON PRODUCTS (ND) (Ultrex®) [09/17/13]

Page 3: Verified Components List - aamanet.org · AAMA CERTIFICATION PROGRAM VERIFIED COMPONENTS LIST October 1, 2013 ... American Architectural Manufacturers Association, 1827 Walden Office

AAMA CERTIFICATION PROGRAM VERIFIED COMPONENTS LIST

October 1, 2013

Page 3 of 19

© 2013 American Architectural Manufacturers Association. All rights reserved. This material is protected by all current copyright laws. No portion of this document may be reproduced in any form or by any

means without obtaining express written authorization from the American Architectural Manufacturers Association.

American Architectural Manufacturers Association, 1827 Walden Office Square, Suite #550, Schaumburg, IL 60173 Phone: (847) 303-5664

WEATHERSTRIPPING

AAMA 701-11 CLASS A (EXTRA HIGH PERFORMANCE PILE WEATHERSTRIPPING)

AMESBURY GROUP, INC. (NC)

G2 Flatback w/ Fin [06/24/13] G2 Flatback Pile [06/24/13]

G2 Springback Triple Fin [06/24/13]

G2 Springback w/ Fin [06/24/13] Woven Flatback [06/24/13]

Woven Flatback w/ Fin [06/24/13]

STERN & COMPANY

Orbicular Series 60 Silencer [04/24/13]

Orbicular Series 60 Standard Pile [04/24/13] Orbicular Series 60 Weatherbeater [04/24/13]

ULTRAFAB, INC.

Gold SeriesTM [01/30/13] Tri FinTM [01/30/13]

Ultra FinTM [01/30/13]

Ultra PileTM [01/30/13] Ultra Soft FinTM [01/30/13]

HOPE GLOBAL 62000 [07/07/12]

62009 [07/07/12]

64000 [07/07/12] 64009 [07/07/12]

68000 [07/07/12]

AAMA 702-11 CLASS A (EXTRA HIGH PERFORMANCE REPLACEABLE FENESTRATION

WEATHERSEALS)

AMESBURY GROUP – EXTRUDED DIVISION (MA)

Foam-Tite 12001 (C-Shaped Foam) [05/28/13]

Foam-Tite 12049 (Rectangular Foam) [05/28/13]

Foam-Tite 12079 (Leaf Shape Foam) [05/28/13] Foam-Tite 12142 (Hollow Round Foam) [05/28/13]

Foam-Tite 12258 (Rectangular Foam) [05/28/13]

Foam-Tite 12289 (Clad D Shape Foam-PE) [05/28/13] Foam-Tite 12298 (C2-Corner Seal D Shape) [05/28/13]

Foam-Tite 12300 (C2-Corner Seal Leaf Shape) [05/28/13]

Foam-Tite 12310 (D-Shape Foam) [05/28/13] Foam-Tite 12314 (C2-Corner Seal Oblong Shape) [05/28/13]

Foam-Tite 12413 (D-Shape Low Durometer) [05/28/13]

Foam-Tite 12427 (D-Shape Low Durometer) [05/28/13] Foam-Tite 32002 (Bulb Shape Foam) [05/28/13]

Foam-Tite 32007 (Round Foam) [05/28/13]

Foam-Tite 32310 (Hollow Foam) [05/28/13] Foam-Tite 32324 (Hollow Bulb Shaped Foam) [05/28/13]

Foam-Tite 32404 (Hollow Round Foam) [05/28/13] Foam-Tite 32690 (Round Foam) [05/28/13]

Foam-Tite 32804 (Round Foam) [05/28/13]

Foam-Tite 32821 (Clad Round Shape Foam-PE) [05/28/13] Foam-Tite 32822 (Clad Hollow Foam-PE) [05/28/13]

INTEK PLASTICS INC.

30113A [08/27/12]

30172A [08/27/12]

30305A [08/27/12] 50135A [08/27/12]

50137A [08/27/12]

50162A [08/27/12] 50166A [08/27/12]

50170A [08/27/12]

50172A [08/27/12] 50178A [08/27/12]

50550A [08/27/12]

50585A [08/27/12]

PROFINE

Series 9040 [06/12/12]

Series 9889 [06/12/12]

Series 100200 [06/12/12] Series 500100 [06/12/12]

Series 500102 [06/12/12]

Series 500500 [06/12/12] Series 500602 [06/12/12]

Series 500900 [06/12/12]

SCHLEGEL SYSTEMS, INC.

Aptus Magnetic Weatherseal Series [02/11/13]

Polyflex Weatherseal Series [02/11/13] Q-Lon Door Seal Series [02/11/13]

Q-Lon Magnetic Seal Series [02/11/13]

Q-Lon T-Slot Series [02/11/13] QEZ T-Slot Series [02/11/13]

QEZD Window Seal Series [02/11/13] QWS Kerf Seal Series [02/11/13]

QWS Pocket Seal Series [02/11/13]

QWS Surface Mount Series [02/11/13]

ULTRAFAB, INC.

Extruded Push-In [01/30/13] Extruded T-Slot [01/30/13]

Pro-Lon Magnetic [04/03/12]

Pro-Lon Push In [04/03/12] Pro-Lon T-Slot [04/03/12]

CENTRAL PLASTICS INC. 2399 Bulb Seal [08/28/12]

9146 Santoprene [08/28/12]

HENNIGES AUTOMOTIVE SCHLEGAL CANADA,

INC./SEALMAX

Sealmax [06/14/13]

LOXCREEN COMPANY CO., INC. (THE)

Lox Seal 9650 [07/08/13]

Page 4: Verified Components List - aamanet.org · AAMA CERTIFICATION PROGRAM VERIFIED COMPONENTS LIST October 1, 2013 ... American Architectural Manufacturers Association, 1827 Walden Office

AAMA CERTIFICATION PROGRAM VERIFIED COMPONENTS LIST

October 1, 2013

Page 4 of 19

© 2013 American Architectural Manufacturers Association. All rights reserved. This material is protected by all current copyright laws. No portion of this document may be reproduced in any form or by any

means without obtaining express written authorization from the American Architectural Manufacturers Association.

American Architectural Manufacturers Association, 1827 Walden Office Square, Suite #550, Schaumburg, IL 60173 Phone: (847) 303-5664

AAMA 702-11 CLASS D (GENERAL PURPOSE REPLACEABLE FENESTRATION

WEATHERSEALS)

DOW-TECH PLASTICS

Bulb Seal 0429-S [04/24/12]

Bulb Seal 1815-S [04/24/12]

REHAU INC.

Bulb Weatherseal 863930 [10/14/11]

Bulb Weatherseal 864952 [10/14/11] Bulb Weatherseal 864992 [10/14/11]

SEALANTS

AAMA 802.3-10, TYPE I (DUCTILE BACK-BEDDING COMPOUND)

DOW CORNING

791 [11/01/11] 799 [09/30/11]

899 [02/15/12]

9-1350 [08/04/11] 1199 [10/25/11]

CWS [02/17/12]

HENKEL CORPORATION (OH)

OSI® TeQ::Seal™ [06/15/11]

MOMENTIVE PERFORMANCE MATERIALS

RTV 5800 [08/31/12]

SCHNEE-MOREHEAD, INC.

Series 5522 Acryl-R [02/17/12] Series 8500 Acryl-R [06/14/11]

TREMCO, INC.

ProGlaze SSG [04/09/12] Spectrem 2 [04/09/12]

TremGlaze S700 [04/09/12]

TremGlaze S900 [04/09/12]

PECORA CORPORATION

896 FC [07/27/12]

SIKA CORPORATION (NJ)

Sikflex® 505UV [01/23/13] Sikasil® N-Plus [06/08/12]

Sikasil® SG 10 [05/15/12] Sikasil® WS 295 [06/08/12]

TBP CONVERTING Series Zialoc 8800 [11/28/12]

AAMA 802.3-10, TYPE II (DUCTILE BACK-BEDDING COMPOUND)

CHEM LINK INC.

Dura Link [01/13/12]

M-1 [01/13/12]

Nova Link [01/13/12]

C.R. LAURENCE CO., INC.

CRL RTV408 Industrial and Construction Silicone

[01/15/13]

DOW CORNING

791 [11/01/11]

899 [02/15/12] 983 SGS [06/11/12]

9-1350 [08/04/11]

1199 [10/25/11] CWS [02/17/12]

H. B. FULLER COMPANY

HL-5200 [04/23/12]

HL-5201 [04/23/12]

HENKEL CORPORATION (OH)

OSI® TeQ::Seal™ [06/15/11]

MOMENTIVE PERFORMANCE MATERIALS

RGS 7700 [08/31/12]

SCS 1800 [08/31/12] SCS 2800 [09/12/12]

SSG 4000AC [09/12/12]

PELLA CORPORATION

Pella Window and Door Installation Sealant (TS) [01/15/13]

QUANEX BUILDING PRODUCTS

Series TruSeal GS1 [11/28/12]

SCHNEE-MOREHEAD, INC.

Series PolyGlaze Plus 5731 [06/06/12]

TREMCO, INC.

Dymonic FC [04/09/12]

Spectrem 2 [04/09/12] TremGlaze S300 [04/09/12]

TremGlaze S500 [04/09/12]

TremGlaze U1600 [04/09/12] Tremsil 600 [04/09/12]

ACCUMETRIC ENGINEERED PRODUCTS BOSS 125 [05/29/12]

BOSS 396 [05/29/12]

BOSS 399 [05/29/12]

BOSS Colors [05/29/12]

ADFAST CORPORATION

Series Adseal 4550 [06/13/11]

Series Adseal 4940 [06/13/11]

AMERICAN SEALANTS, INC.

Series ASI 335 Window Seal [12/10/12]

CSL SILICONES, INC.

CSL 335A [03/07/13] CSL 343 [05/24/13]

NOVAGARD SOLUTIONS Novaflex SBC40-M116 [09/23/11]

Page 5: Verified Components List - aamanet.org · AAMA CERTIFICATION PROGRAM VERIFIED COMPONENTS LIST October 1, 2013 ... American Architectural Manufacturers Association, 1827 Walden Office

AAMA CERTIFICATION PROGRAM VERIFIED COMPONENTS LIST

October 1, 2013

Page 5 of 19

© 2013 American Architectural Manufacturers Association. All rights reserved. This material is protected by all current copyright laws. No portion of this document may be reproduced in any form or by any

means without obtaining express written authorization from the American Architectural Manufacturers Association.

American Architectural Manufacturers Association, 1827 Walden Office Square, Suite #550, Schaumburg, IL 60173 Phone: (847) 303-5664

NUCO INC.

NUFLEX 313 [01/12/12]

PECORA CORPORATION

895 NST [01/16/12]

896 [01/16/12]

896 FC [07/27/12]

896 TBS [01/16/12]

PREMIER INDUSTRIAL SUPPLY, INC.

Xtrabond 450 [01/15/13]

SHIN-ETSU SILICONES OF AMERICA

Series KEG 4500 [11/28/12]

SIKA CORPORATION (NJ)

Sikflex® 505UV [01/23/13]

Sikasil® N-Plus [06/08/12]

Sikasil® SG 10 [05/15/12] Sikasil® WS 295 [06/08/12]

SILCO INC.

Sil-Flex 7500 [12/11/12]

Sil-Seal 9500 [12/11/12]

Ultra Flex [12/11/12]

SOUDAL, INC.

SoudaSeal 50 LM [05/16/12] SoudaSeal AP [05/16/12]

TBP CONVERTING Series Zialoc 8800 [04/11/13]

AAMA 803.3-10, TYPE I (NARROW JOINT SEAM SEALER)

CHEM LINK INC.

Dura Link [01/13/12]

M-1 [01/13/12]

Nova Link [01/13/12]

C.R. LAURENCE CO., INC.

CRL M64 Modified Polyurethane Construction Sealant [11/29/12]

CRL RTV408 Industrial and Construction Silicone

[01/15/13]

DOW CORNING

1199 [10/25/11]

PELLA CORPORATION

Pella Window and Door Installation Sealant [11/29/12] Pella Window and Door Installation Sealant (TS) [01/15/13]

QUANEX BUILDING PRODUCTS

Series TruSeal GS1 [11/28/12]

SCHNEE-MOREHEAD, INC.

Series 2100 Cura Sil [12/07/11]

Series 5555 Acryl-R [10/07/11]

TREMCO, INC.

Tremsil 600 [04/09/12]

ACCUMETRIC ENGINEERED PRODUCTS

BOSS 125 [05/29/12]

BOSS 396 [05/29/12] BOSS 399 [05/29/12]

BOSS 828 [05/29/12] BOSS Colors [05/29/12]

AMERICAN SEALANTS, INC. Series ASI 335 Window Seal [12/10/12]

CSL SILICONES, INC. CSL 335A [03/07/13]

CSL 343 [05/24/13]

DAP PRODUCTS, INC.

Dynaflex 800 [09/22/11]

Sidewinder [09/22/11]

NOVAGARD SOLUTIONS

Novaflex® Multi-Purpose M Series (Type II) [09/23/11]

NUCO INC.

NUFLEX 313 [01/12/12]

PREMIER INDUSTRIAL SUPPLY, INC.

Xtrabond 450 [01/15/13] Xtrabond 9500 [11/29/12]

SHIN-ETSU SILICONES OF AMERICA Series KEG 4500 [11/28/12]

SIKA CORPORATION (NJ)

Sikasil® N-Plus [06/08/12]

Sikasil® WS 295 [06/08/12]

SILCO INC.

Sil-Flex 7500 [12/11/12]

Sil-Seal 9500 [12/11/12] Ultra Flex [12/11/12]

SOUDAL, INC. SoudaSeal 50 LM [05/16/12]

SoudaSeal AP [05/16/12]

TBP CONVERTING

Series Zialoc 8800 [04/11/13]

AAMA 803.3-10, TYPE II (NARROW JOINT SEAM SEALER)

SCHNEE-MOREHEAD, INC.

Series 5504 Acryl-R [06/30/11] Series 5514 Acryl-R [07/06/12]

ACCUMETRIC ENGINEERED PRODUCTS

BOSS 827 [05/29/12]

PARR TECHNOLOGIES

PTI 200 [05/24/13]

PECORA CORPORATION 896 SSL [07/27/12]

Page 6: Verified Components List - aamanet.org · AAMA CERTIFICATION PROGRAM VERIFIED COMPONENTS LIST October 1, 2013 ... American Architectural Manufacturers Association, 1827 Walden Office

AAMA CERTIFICATION PROGRAM VERIFIED COMPONENTS LIST October 1, 2013

Page 6 of 19

© 2013 American Architectural Manufacturers Association. All rights reserved.

This material is protected by all current copyright laws. No portion of this document may be reproduced in any form or by any means without obtaining express written authorization from the American Architectural Manufacturers Association.

American Architectural Manufacturers Association, 1827 Walden Office Square, Suite #550, Schaumburg, IL 60173 Phone: (847) 303-5664

AAMA 804.3-10 (BACK-BEDDING MASTIC GLAZING TAPES)

C.R. LAURENCE CO., INC.

Series Butyl Architectural Tape Gray [08/06/12] Series Butyl Architectural Tape Black [08/06/12]

SCHNEE-MOREHEAD, INC.

Series 5700 Poly-Glaze [11/25/11]

TREMCO, INC.

ET440 [04/09/12] Polyshim [04/09/12]

ADCO PRODUCTS, INC. Series GT-1 [08/06/12]

Series GT-4 [08/06/12]

AAMA 805.2-10, GROUP A (BONDING BACK-BEDDING COMPOUND)

DOW CORNING

InstantGlaze III [06/29/12]

HENKEL CORPORATION (NJ)

Purfect Glaze G 91-033A [07/26/11]

Purfect Glaze G 91-825A [07/26/11] Purfect Glaze G 91-880A [07/26/11]

Purfect Glaze S 91-037A [11/08/12]

Technomelt PUR GP Glaze Black [08/14/13]

Technomelt PUR GP Glaze Clear [08/14/13]

Technomelt PUR GP Glaze Gray [08/14/13] Technomelt PUR GP Glaze White [08/14/13]

Technomelt PUR SA Glaze 91-342A [04/12/12]

Technomelt PUR SA Glaze 91-350A [04/12/12] Technomelt PUR SA Glaze 91-822A [04/12/12]

AAMA 805.2-10, GROUP C (BONDING BACK-BEDDING COMPOUND)

CHEM LINK INC.

Dura Link [01/13/12] M-1 [01/13/12]

Nova Link [01/13/12]

DOW CORNING

791 [11/01/11]

794F [04/20/12] 799 [09/30/11]

899 [02/15/12]

995 [12/13/11] 9-1350 [08/04/11]

1199 [12/14/11]

CWS [02/17/12] InstantGlaze I [02/08/12]

InstantGlaze II [02/13/12]

H. B. FULLER COMPANY

HL-5200 [04/23/12]

HL-5201 [04/23/12]

HENKEL CORPORATION (OH)

OSI® TeQ::Seal™ [06/15/11]

MOMENTIVE PERFORMANCE MATERIALS

RGS 7700 [08/31/12] RTV 5800 [08/31/12]

SCS 1800 [08/31/12]

SCS 2800 [09/12/12] SSG 4000AC [09/12/12]

QUANEX BUILDING PRODUCTS

Series TruSeal GS1 [11/28/12]

SCHNEE-MOREHEAD, INC.

Series 2100 Cura Sil [12/07/11]

Series 2700 Rapid Glaze [02/17/12]

Series 5555 Acryl-R [10/07/11] Series 8500 Acryl-R [06/14/11]

Series PolyGlaze Plus 5731 [06/06/12]

TREMCO, INC.

TremGlaze S500 [04/09/12]

Tremsil 600 [04/09/12]

ACCUMETRIC ENGINEERED PRODUCTS

BOSS 125 [05/29/12] BOSS 396 [05/29/12]

BOSS 399 [05/29/12]

BOSS Colors [05/29/12]

ADFAST CORPORATION Series Adseal 4550 [06/13/11]

Series Adseal 4940 [06/13/11]

AMERICAN SEALANTS, INC.

Series ASI 335 Window Seal [12/10/12]

CSL SILICONES, INC.

CSL 335A [03/07/13]

CSL 343 [05/24/13]

NOVAGARD SOLUTIONS

Novaflex® Multi-Purpose M Series (Type I) [01/12/12] Novaflex® Multi-Purpose M Series (Type II) [09/23/11]

Novaflex® SBC30-M150 [09/21/12]

Novaflex SBC40-M116 [09/23/11]

PECORA CORPORATION

895 NST [01/16/12] 896 [01/16/12]

896 FC [07/27/12]

896 HIS [02/27/12] 896 TBS [01/16/12]

SELENA USA, INC. MR88 [07/18/12]

Tytan O34 [08/22/11]

SHIN-ETSU SILICONES OF AMERICA

Series KEG 4500 [11/28/12]

SIKA CORPORATION (NJ)

Sikflex® 552 [01/03/13]

Sikflex® 552 AT [05/23/13] Sikasil® N-Plus [06/08/12]

Sikasil® SG 10 [05/08/12]

Sikasil® WS 295 [06/08/12]

Page 7: Verified Components List - aamanet.org · AAMA CERTIFICATION PROGRAM VERIFIED COMPONENTS LIST October 1, 2013 ... American Architectural Manufacturers Association, 1827 Walden Office

AAMA CERTIFICATION PROGRAM VERIFIED COMPONENTS LIST

October 1, 2013

Page 7 of 19

© 2013 American Architectural Manufacturers Association. All rights reserved. This material is protected by all current copyright laws. No portion of this document may be reproduced in any form or by any

means without obtaining express written authorization from the American Architectural Manufacturers Association.

American Architectural Manufacturers Association, 1827 Walden Office Square, Suite #550, Schaumburg, IL 60173 Phone: (847) 303-5664

SILCO INC.

Sil-Flex 7500 [12/11/12] Sil-Seal 9500 [12/11/12]

Ultra Flex [12/11/12]

SOUDAL, INC.

SoudaSeal 50 LM [05/16/12] SoudaSeal AP [05/16/12]

TBP CONVERTING

Series Zialoc 8800 [04/11/13]

AAMA 806.3-10 (BACK-BEDDING MASTIC GLAZING TAPES)

C.R. LAURENCE CO., INC.

Series 100+ Load Bearing [08/06/12]

SCHNEE-MOREHEAD, INC.

Series 5700 Poly-Glaze [11/25/11]

ADCO PRODUCTS, INC.

Series GT-6 [08/06/12]

AAMA 807.3-10 (BACK-BEDDING MASTIC GLAZING TAPES)

C.R. LAURENCE CO., INC.

Series Butyl Architectural Tape Gray [08/06/12]

Series Butyl Architectural Tape Black [08/06/12]

SCHNEE-MOREHEAD, INC.

Series 5700 Poly-Glaze [11/25/11]

TREMCO, INC.

ET440 [04/09/12]

Polyshim [04/09/12]

ADCO PRODUCTS, INC.

Series GT-1 [08/06/12]

Series GT-4 [08/06/12]

AAMA 809.2-10 (NON-DRYING SEALANTS)

MANUS PRODUCTS, INC. Series Manus Bond 50A-HV [11/01/12]

AAMA 810.1-10, TYPE I (EXPANDED CELLULAR GLAZING TAPES)

ADCHEM CORPORATION

Series GT w/ Acrylic PSA, 4-6# PE foam [06/26/12]

Series HF w/ Dual PSA, 3-5# PE foam [06/26/12]

ADHESIVES RESEARCH, INC.

ARClad 2000/8000 [11/03/11]

ARClad 3000 [11/03/11] ARClad 4000 [11/04/11]

FLEXCON INDUSTRIAL LLC

Series AWT-3 w/ Acrylic PSA, 3# PE foam [12/18/12]

Series AWT-5 w/ Acrylic PSA, 5# PE foam [12/18/12]

Series DGT w/ Acrylic PSA, 3# PE foam [12/18/12] Series DGT w/ Acrylic PSA, 5# PE foam [12/18/12]

Series HiPerGlaze F1 w/ Acrylic PSA, 6# PE/EVA foam

[12/18/12] Series HiPerGlaze F1 w/ Acrylic PSA, 12# PE/EVA foam

[12/18/12] Series HiPerGlaze V1 w/ Rubber/Acrylic Dual PSA, 4#

PE/EVA foam [12/18/12]

GASKA TAPE, INC.

Series EG400 w/ Acrylic PSA, 4# PE foam [07/15/11]

Series EG600 w/ Acrylic PSA, 6# PE foam [07/15/11] Series V1500 w/ Acrylic PSA, 15# PVC foam [07/15/11]

SCHNEE-MOREHEAD, INC.

Series 2560 [06/15/11]

Series 2565 [06/15/11]

TESA TAPE, INC.

Series 0705X Solid Acrylic GT w/ Acrylic PSA [07/26/12]

GTA-NHT INC.-VENTURE TAPE Series VG700 w/ Dual PSA, 2.5# & 5# PE foam [06/15/11]

Series VG1200 w/ Acrylic PSA, 2.5# & 5# PE foam [06/15/11]

ADHESIVE APPLICATIONS Series 2000 BZ w/ Rubber PSA, 2.5# & 3# PE foam [06/15/11]

Series 5000 B w/ Rubber PSA, 2.5# & 3# PE foam [06/15/11]

Series 6000 BZ w/ Acrylic PSA, 2.5#, 3# & 5# PE foam [06/15/11]

Series 7000 BZ w/ Acrylic PSA, 2.5#, 3# & 5# PE foam [06/15/11]

Series 8000 B w/ Dual PSA, 2.5#, 3# & 5# PE foam [06/15/11]

Series 9000 BZ w/ Dual PSA, 3# PE foam [06/15/11]

ADVANCED CONVERTING TECHNOLOGIES, INC.

Series 1000 w/ Acrylic PSA, 4# PE foam [08/20/12]

Series 1000 w/ Acrylic PSA, 5# PE foam [08/20/12]

CAPITAL TAPE CO., INC.

5100 Closed Cell [07/18/11] 5200 Closed Cell [07/18/11]

CASCADE AQUA-TECH, LTD.

Series 3000 B/W (3002 B/W) w/ Acrylic PSA, 4# PE foam

[07/18/11] Series 3000 B/W (3004 B/W) w/ Acrylic PSA, 2.5# PE foam

[07/18/11]

ECHO TAPE

Series GL-N0708 w/ Acrylic PSA, 2# PE foam [08/25/11]

Series GL-N0716 w/ Acrylic PSA, 4-4.5# PE foam [08/25/11]

PRES-ON TAPE AND GASKET

Series PL 4400 w/ Rubber PSA, 4# PE foam [06/22/11] Series PL 4500 w/ Acrylic PSA, 4# PE foam [06/22/11]

Series PL 4700 w/ Dual PSA, 4# PE foam [06/22/11]

SAINT GOBAIN PERFORMANCE PLASTICS CORP.

Series V980/V990 [03/29/12]

Series V992 [03/29/12]

Page 8: Verified Components List - aamanet.org · AAMA CERTIFICATION PROGRAM VERIFIED COMPONENTS LIST October 1, 2013 ... American Architectural Manufacturers Association, 1827 Walden Office

AAMA CERTIFICATION PROGRAM VERIFIED COMPONENTS LIST

October 1, 2013

Page 8 of 19

© 2013 American Architectural Manufacturers Association. All rights reserved. This material is protected by all current copyright laws. No portion of this document may be reproduced in any form or by any

means without obtaining express written authorization from the American Architectural Manufacturers Association.

American Architectural Manufacturers Association, 1827 Walden Office Square, Suite #550, Schaumburg, IL 60173 Phone: (847) 303-5664

SEAL METHODS INC. Series 4300 w/ Acrylic PSA, 2# PE foam [01/24/13]

Series 4300 w/ Acrylic PSA, 4# PE foam [01/24/13]

TBP CONVERTING

Series TBP 751 Black and White w/ Acrylic PSA, 4# PE

foam [07/18/11] Series TBP 754 Black and White w/ Acrylic PSA, 2.5# PE

foam [07/18/11]

V. HIMARK (USA) INC.

Series G480B/W (G483W/G483B/G484W/G484B) w/

Acrylic PSA, 2.5# PE foam [07/18/11]

Series G480B/W (G488W/G488B/G485W/G485B) w/

Acrylic PSA, 4# PE foam [07/18/11]

Series R480B/W (R488W/R488B/R485W/R485B/R484W/R484B/R

483W/R483B) w/ Rubber PSA, 4# PE foam [07/18/11]

AAMA 810.1-10, TYPE II (EXPANDED CELLULAR GLAZING TAPES)

ADHESIVE APPLICATIONS

Series 8000 B w/ Dual PSA, 2# PE foam [08/25/11]

CASCADE AQUA-TECH, LTD.

CGT 3100 [06/20/13]

AAMA 813-11 (ADHESIVES USED IN SIMULATED DIVIDED LITES)

ADCHEM CORPORATION

Series LSESDL-G40-74 [06/18/12] Series MTB-190 [06/18/12]

GASKA TAPE, INC.

Series GHB 4500 [06/18/12]

TESA TAPE, INC.

Series 625xx [02/07/13]

Series 906xx [02/07/13]

HARDWARE

AAMA 901-10 (ROTARY & LINEAR OPERATORS)

ASHLAND HARDWARE SYSTEMS

W-1275 Dyad Operator C-AW40 [05/02/13]

W-1276 Dyad Operator C-AW40 [05/02/13]

W-1276 Egress Operator C-C30/C-HC40 [05/09/13] W-1489 Optima Dual Arm Operator C-C30/C-HC40 [05/15/13]

W-1489 Painted Awning Operator AP-R15/AP-LC25/AP-C30 [06/27/12]

W-1491 Dual Arm Operator C-C30/C-HC40 [05/23/12] W-1491 Optima Awning Operator AP-R15/AP-LC25/AP-C30 [09/29/12]

ROTO FASCO CANADA, INC.

Grand Split Arm Operator C-AW40/AW-PG40-C [05/08/12]

FASTEK PRODUCTS/AMESBURY GROUP

Awning Operator AP-R15/AP-LC25/AP-C30 [06/02/13]

Dual Arm Operator C-C30/C-HC40 [06/09/13]

Dyad Operator C-C30/C-HC40 [05/23/13] Single Arm Operator C-C30/C-HC40 [05/20/13]

ROTO FRANK OF AMERICA, INC.

X-Drive Carbon Steel Dual Arm Rotary Operator C-AW40 [07/02/12]

X-Drive Carbon Steel Dual Arm Rotary Awning Operator AP-R15/AP-LC25/AP-C30 [06/21/12]

X-Drive Carbon Steel Split Arm and Single Arm Rotary Operator C-C30/C-HC40 [06/25/12] X-Drive Stainless Steel Dual Arm Rotary Operator C-AW40 [06/25/12]

X-Drive Stainless Steel Dual Arm Rotary Awning Operator AP-R15/AP-LC25/AP-C30 [06/18/12]

X-Drive Stainless Steel Split Arm and Single Arm Rotary Operator C-C30/C-HC40 [06/25/12]

TRUTH HARDWARE CORPORATION (MN)

Series 15 Ellipse Dyad Operator C-R15/C-LC25/R-PG15-C [02/08/13] Series 15 Ellipse Single Arm Operator C-R15/C-LC25/R-PG15-C [02/24/13]

Series 15 EntryGard Dual Arm Operator C-R15/C-LC25/R-PG15-C [09/24/13] Series 15 EntryGard Dyad Operator C-R15/C-LC25/R-PG15-C [08/30/13]

Series 15 EntryGard Single Arm Operator C-R15/C-LC25/R-PG15-C [03/25/13]

Series 23 Dyad Operator C-C30/C-HC40 [02/24/13]

Page 9: Verified Components List - aamanet.org · AAMA CERTIFICATION PROGRAM VERIFIED COMPONENTS LIST October 1, 2013 ... American Architectural Manufacturers Association, 1827 Walden Office

AAMA CERTIFICATION PROGRAM VERIFIED COMPONENTS LIST

October 1, 2013

Page 9 of 19

© 2013 American Architectural Manufacturers Association. All rights reserved. This material is protected by all current copyright laws. No portion of this document may be reproduced in any form or by any

means without obtaining express written authorization from the American Architectural Manufacturers Association.

American Architectural Manufacturers Association, 1827 Walden Office Square, Suite #550, Schaumburg, IL 60173 Phone: (847) 303-5664

Series 23 Single Arm Operator C-C30/C-HC40 [03/18/13]

Series 50 Maxim Dual Arm Operator C-C30/C-HC40 [12/10/12] Series 50 Maxim Dual Arm Operator SST C-C30/C-HC40 [02/14/13]

Series 50 Maxim Dyad Operator C-C30/C-HC40 [09/24/13]

Series 50 Maxim Dyad Operator SST C-C30/C-HC40 [11/19/12]

Series 50 Maxim Single Arm Operator C-C30/C-HC40 [08/30/13]

Series 50 Maxim Single Arm Operator SST C-C30/C-HC40 [09/09/13

Series Encore Awning Operator AP-R15/AP-LC25/AP-C30 [09/24/13] Series Encore Awning Operator SST AP-R15/AP-LC25/AP-C30 [11/12/12]

Series Encore Dual Arm Operator C-C30/C-HC40 [03/18/13]

Series Encore Dual Arm Operator SST C-C30/C-HC40 [11/15/12] Series Encore Dyad Operator C-C30/C-HC40 [08/30/13]

Series Encore Dyad Operator SST C-C30/C-HC40 [09/11/13]

Series Encore Single Arm Operator C-C30/C-HC40 [11/19/12] Series Encore Single Arm Operator SST C-C30/C-HC40 [02/08/13]

Series Weathershield Dyad Operator SST C-R15/C-LC25/R-PG15-C [09/18/13]

Series Weathershield Single Arm Operator C-R15/C-LC25/R-PG15-C [03/13/12]

BRONZE CRAFT CORP. (THE)

255 Series Single Arm Operator C-AW40 [03/22/13]

RADISSON INDUSTRIES, INC.

Lts/Grande Series Carbon Steel Awning Operator AP-R15/R-PG15-AP/AP-LC25/AP-C30/CW-PG30-AP [04/04/13] Lts/Grande Series Carbon Steel Dual Arm Operator C-AW40/AW-PG40-C [04/17/13]

Lts/Grande Series Carbon Steel Dyad Operator C-C30/C-HC40/CW-PG30-C [02/14/13]

Lts/Grande Series Stainless Steel Awning Operator AP-R15/R-PG15-AP/AP-LC25/AP-C30/CW-PG30-AP [03/21/13] Lts/Grande Series Stainless Steel Dual Arm Operator C-AW40/AW-PG40-C [05/04/13]

Lts/Grande Series Stainless Steel Dyad Operator C-C30/C-HC40/CW-PG30-C [03/04/13]

AAMA 902-07 (SASH BALANCES)

ASHLAND HARDWARE SYSTEMS

Series A [11/30/12] Series C [11/27/12]

Series K [06/06/13]

Series M [08/12/13] Series S [06/28/12]

Series V [08/07/13]

BSI HARDWARE / AMESBURY GROUP

Series 100 [09/11/13]

Series 130 [09/19/13]

Series 161 [09/13/13]

Series 401 [04/23/12]

Series 506 [08/26/13] Series 651 [04/16/12]

Series 716 [08/28/13]

Series 758 [04/30/12] Series 841 [08/30/13]

Series Centurion 985 [05/23/12]

Series Egress 983 [05/08/12] Series M230 SuperBoost [03/25/13]

Series SuperBoost F 210 [05/18/12] Series SuperBoost K 220 [05/24/12]

Series Titan 981 [03/11/13]

Series Universal 984 [05/16/12]

CALDWELL MANUFACTURING CO.

Series 77t Block & Tackle [08/30/12] Series 86 Block & Tackle [09/28/12]

Series 97t Block & Tackle [10/23/12]

Series Aluma-Tilt/Spirex [08/15/12] Series APEX Block & Tackle [08/28/12]

Series Block & Tackle/Prodigy [09/14/12]

Series Constant Force: ½” Quick-Tilt [07/23/12] Series Constant Force: ½” Roller-Tilt [07/23/12]

Series Constant Force: ¾” Roller-Tilt [07/24/12]

Series Enhanced Insul-Tilt/Spiromite [08/10/12] Series EZ Lift 7”-17” [08/06/12]

Series EZ Lift 18”-60” [08/06/12]

Series Ultra-Lift [10/22/12] Series Ultra-Lift nt [09/05/12]

JOHN EVANS’ SONS, INC. Series Half Inch [08/09/12]

Series Half Inch Heavy Duty [08/09/12]

Series SideLoad[08/09/12] Series Three Quarter Inch [08/09/12]

UNIQUE/AMESBURY HARDWARE PRODUCTS

Block and Tackle Take Out [08/13/12]

Block and Tackle Tilt [08/13/12]

LiteLift [08/13/12] Spiral 38 [08/13/12]

Spiral Super Heavy Duty 38 [08/13/12]

Spiral 58 [08/13/12] SuperLift [08/13/12]

WAI LUNG INDUSTRIAL CO., LTD ½” Coil [02/20/13]

WL334S [06/06/12] 405S [10/15/12]

406S [10/15/12]

407S [10/15/12] 408S [10/15/12]

409S [09/10/12]

ACU PLASMOLD, INC.

CBE-3 Coil [10/08/12]

KERN-LIEBERS USA, INC.

½” Balance Series [03/26/13]

Page 10: Verified Components List - aamanet.org · AAMA CERTIFICATION PROGRAM VERIFIED COMPONENTS LIST October 1, 2013 ... American Architectural Manufacturers Association, 1827 Walden Office

AAMA CERTIFICATION PROGRAM VERIFIED COMPONENTS LIST

October 1, 2013

Page 10 of 19

© 2013 American Architectural Manufacturers Association. All rights reserved. This material is protected by all current copyright laws. No portion of this document may be reproduced in any form or by any

means without obtaining express written authorization from the American Architectural Manufacturers Association.

American Architectural Manufacturers Association, 1827 Walden Office Square, Suite #550, Schaumburg, IL 60173 Phone: (847) 303-5664

AAMA 904-09 (MULTI-BAR HINGES)

ADVANTAGE MFG, A DIVISION OF CALDWELL MANUFACTURING COMPANY NORTH AMERICA, LLC.

2000/3000 16” Magnum Projection P-C-145 Lbs.-40” High-LR [07/19/12] 2000/3000 24” Magnum Projection P-C-200 Lbs.-60” High-LR [07/30/12]

2000/3000 28” Magnum SG Projection P-C-320 Lbs.-87” High-LR [08/31/12]

4000/4100 12” Magnum Casement C-C-135 Lbs.-33” Wide-LR-NLBR [08/14/12] 5000 12” Magnum Egress Casement C-C-180 Lbs.-36” Wide-LR-NLBR [08/21/12]

ROTO FASCO CANADA, INC.

2400 10” Stainless Steel Hinge C-R-45 Lbs.-36” Wide-NLR-NLBR [06/19/12]

SECURISTYLE LIMITED

PX0950/PX0450 POS-C-180 kg-1500mm Wide 2000mm High-LR-NLBR [08/05/13]

STORMB10 P-C-37 kg-635mm High- LR-NLBR [09/11/13]

STORMB12 P-C-45 kg-787mm High- LR-NLBR [09/11/13] STORMB16 P-C-55 kg-1090mm High- LR-NLBR [09/11/13]

STORMB22 P-C-75 kg-1500mm High- LR-NLBR [05/15/12]

STORMB26 P-C-120 kg-2200mm High- LR-NLBR [09/20/13] STORMBS10 C-C-38 kg-665mm Wide-LR-NLBR [06/14/13]

STORMBS16 C-C-47 kg-840mm Wide-LR-NLBR [06/14/13]

STORME16 C-C-47 kg-840mm Wide- LR-NLBR [06/20/13]

TRUTH HARDWARE CORPORATION (MN)

12” SD 222 SS C-R-82 Lbs.-32” Wide-LR-NLBR [08/06/12] 12” SD 401 SS C-R-65 Lbs.-32” Wide-LR-NLBR [08/09/12]

14” SD 201 SS C-R-65 Lbs.-32” Wide-LR-NLBR [08/01/12]

14” HD 601 SS C-R-120 Lbs.-36” Wide-LR-NLBR [06/18/12] 16” HD 333 SS C-R-175 Lbs.-32” Wide-LR-NLBR [06/27/12]

16” HD 334 SS C-R-175 Lbs.-32” Wide-LR-NLBR [06/21/12]

16” SD 224 SS C-R-82 Lbs.-32” Wide-LR-NLBR [08/14/12] 20” SD 201 SS P-R-40 Lbs.-34” High-LR-NLBR [09/05/12]

24” HD 301 SS C-R-120 Lbs.-36” Wide-LR-NLBR [07/16/12]

28” HD 301 SS P-R-195 Lbs.-60” High-LR-NLBR [09/14/12] 28” HD Superior SS P-R-315 Lbs.-87” High-LR-NLBR [10/02/12]

YKK AP AMERICA

12” (4K-14207) C-C-83 Lbs.-26” Wide-LR-NLBR [11/19/12]

16” (4K-14208) C-C-117 Lbs.-36” Wide-LR-NLBR [11/14/12] 12” (4K-14207) P-C-97 Lbs-30” High-LR-NLBR [11/08/12]

16” (4K-14208) P-C-145 Lbs-44” High-LR-NLBR [10/12/12]

16” (5K-15284) P-C-145 Lbs-44” High-LR-NLBR [10/22/12]

22” (4K-14209) P-C-166 Lbs-52” High-LR-NLBR [10/29/12]

RADISSON INDUSTRIES, INC. 2100 10” Clip-On Washability P-R-61 Lbs.-35” High-NLR-NLBR [09/17/12]

2101 10” Clip-On Washability Stainless Steel P-R-61 Lbs.-35” High-NLR-NLBR [10/01/12]

2500 10” Snap-On Washability C-C-105 Lbs.-35” Wide-NLR-NLBR [09/17/12] 2501 10” Snap-On Washability Stainless Steel C-C-105 Lbs.-35” Wide-NLR-NLBR [10/11/12]

AAMA 906-07 (SLIDING GLASS DOOR ROLLER ASSEMBLIES)

ANTHONY INNOVATIONS PTY. INC.

Series SS7XXXDSGA 225 Lbs. [07/16/12]

DOOR HARDWARE/AMESBURY GROUP

1917-2000-63 Tandem Steel 150 Lbs. [02/11/13]

1917-2000 Tandem SS 150 Lbs. [07/16/13]

1925-PRN-300-ST Tandem SS 400 Lbs. [01/28/13] 1931-6000-63 Steel 100 Lbs. [07/17/13]

1931-6000-SS Roller 125 Lbs. [07/31/13]

1932-6000-63 Tandem Steel 200 Lbs. [07/01/13] 1932-6000-SS Tandem SS 250 Lbs. [07/25/13]

1932-P6000-SS Tandem SS 300 Lbs. [07/24/13]

AD-15 Steel 75 Lbs. [02/11/13] AD-16-BS-100 Steel 75 Lbs. [01/29/13]

AD-19-BS-112 Steel 75 Lbs. [02/12/13]

AD-19-TBN-125 Steel 75 Lbs. [01/21/13] AD-21-TBN-150 Steel 100 Lbs. [01/23/13]

AD-92-PRS-150 SS 150 Lbs. [01/15/13] AD-92-PRS-150 Steel 150 Lbs. [02/05/13]

TA-35-BS-100 Steel 100 Lbs. [06/03/13]

TA-35-BS-112 Tandem SS 150 Lbs. [07/07/13] TA-35-BS-125 Steel 150 Lbs. [03/01/13]

TA-35-BS-125 Tandem Steel 200 Lbs. [08/02/13]

TA-36-BS-125 Tandem Steel 200 Lbs. [01/25/13] TA-38-PRS-150 Tandem SS 300 Lbs. [08/01/13]

TA-39-BS-181-850 Tandem Steel 250 Lbs. [01/29/13]

TA-39-BSS-181-850 Tandem SS 250 Lbs. [02/01/13] TA-39-PRS-181 SS 300 Lbs. [05/03/13]

TA-51-BS-112 Steel 150 Lbs. [04/03/13]

TA-51-BS-125 Steel 200 Lbs. [03/22/13] TA-51-BS-150 Steel 200 Lbs. [03/26/13]

TA-51-BSS-150 SS 250 Lbs. [05/20/13]

TA-64-BSS-150-820-SSOS Tandem SS 250 Lbs. [02/04/13] TA-73-BS-125 Tandem Steel 200 Lbs. [03/05/13]

Page 11: Verified Components List - aamanet.org · AAMA CERTIFICATION PROGRAM VERIFIED COMPONENTS LIST October 1, 2013 ... American Architectural Manufacturers Association, 1827 Walden Office

AAMA CERTIFICATION PROGRAM VERIFIED COMPONENTS LIST

October 1, 2013

Page 11 of 19

© 2013 American Architectural Manufacturers Association. All rights reserved. This material is protected by all current copyright laws. No portion of this document may be reproduced in any form or by any

means without obtaining express written authorization from the American Architectural Manufacturers Association.

American Architectural Manufacturers Association, 1827 Walden Office Square, Suite #550, Schaumburg, IL 60173 Phone: (847) 303-5664

TA-76-BS-125 Steel 200 Lbs. [03/04/13]

TA-76-BS-143 Steel 200 Lbs. [04/30/13] TA-76-BSS-125 SS 200 Lbs. [02/27/13]

TA-76-BSS-143 SS 250 Lbs. [05/17/13]

TA-76-BSS-150 Tandem SS 250 Lbs. [03/12/13]

TA-76-PRS-125 Tandem SS 300 Lbs. [03/19/13]

TA-78-BS-125 Tandem Steel 200 Lbs. [07/26/13]

TA-78-BSS-125 Tandem SS 200 Lbs. [03/13/13] TA-81-PRN-212 Tandem SS 250 Lbs. [01/17/13]

TA-81-PRS-212 Tandem SS 300 Lbs. [01/22/13]

TA-83-PRS-212W Tandem SS 300 Lbs. [01/18/13] TA-84-BS-125 Steel 200 Lbs. [05/29/13]

TA-84-BS-143 Tandem Steel 200 Lbs. [03/06/13]

TA-84-BSS-143 Tandem SS 250 Lbs. [07/30/13] TA-84-PRS-125 Tandem Steel 300 Lbs. [06/22/13]

TA-84-PRS-125 Tandem SS 300 Lbs. [03/07/13]

TA-84-PRS-143 Tandem SS 300 Lbs. [03/11/13] TA-84-PST-143 Tandem Steel 300 Lbs. [03/08/13]

TA-88-BNSS-166 Tandem SS 200 Lbs. [07/29/13]

ROTO FASCO CANADA, INC.

VA-101-9004YC 75 Lbs. [08/02/13]

VA-101-9005SS 125 Lbs. [05/18/13] VA-101-9005YC 125 Lbs. [08/05/13]

P.H. TECH, INC.

#9732 Roller Assembly 175 Lbs. [05/12/12]

TRUTH HARDWARE (MN)

Series 38.09 1.56 Wheel Stainless 250 Lbs. [08/13/12]

Series 38.26 Stainless End Adj 1.81 Acetal 300 Lbs. [09/27/13]

Series 39.10 Steel 200 Lbs. [02/01/13]

Series 39.11 Nylon 200 Lbs. [11/09/12]

Series 39.13 Stainless 200 Lbs. [11/18/12]

Series 39.27 Nylon Wheel Stainless 125 Lbs. [09/09/13] Series D-4500-AT 1-1/8 ACE PREC Acetal 75 Lbs.

[08/21/13]

Series D-4500-AT 1-1/4 Acetal 150 Lbs. [05/17/13]

Series SD 659 Steel 75 Lbs. [03/18/13]

Series SD 740 Steel 200 Lbs. [09/17/13]

Series SD 747 Steel 75 Lbs. [04/30/12] Series TA-35B-BS-112-H-740-C-2 Steel 125 Lbs. [09/11/13]

Series TA-39-BS-181-850 w/ NO SPRING Steel 200 Lbs.

[05/11/12] Series TA-39-BSS-181-850 PREC Stainless 200 Lbs. [03/22/13]

Series TA-39-BSS-181-850 Stainless 200 Lbs. [05/05/12]

Series TA-51-BS Steel 175 Lbs. [05/08/13] Series TA-51-BS-100 Steel 125 Lbs. [11/28/12]

Series TA-51-BS-125-U Steel 175 Lbs. [08/26/13]

Series TA-51-BS-150-W/10-32 CSK Steel 175 Lbs. [09/18/13] Series TA-73-BS-147 Steel 200 Lbs. [07/31/12]

Series TA-73-BSS-125 Stainless 250 Lbs. [03/13/13]

Series TA-73-BSS-147 Stainless 250 Lbs. [11/29/12] Series TA-73C-BSS-150 Stainless 225 Lbs. [05/03/12]

Series 1978 Steel 125 Lbs. [09/24/13]

ACU PLASMOLD, INC.

PDR-02 Stainless Steel Patio Door Roller 100 Lbs.

[01/14/13]

CENTURY HARDWARE S2020 Tandem Steel 150 Lbs. [01/22/13]

NORTHERN ARCHITECTURAL PRODUCTS INC. 1197 Tandem Roller 150 Lbs. [08/09/12]

AAMA 908-09 (FRICTION BASED SASH BALANCES)

BSI HARDWARE / AMESBURY GROUP

Series 760 [09/03/13] Series 800 [09/09/13]

Series 909 [09/05/13]

Series 960 [09/03/13]

Page 12: Verified Components List - aamanet.org · AAMA CERTIFICATION PROGRAM VERIFIED COMPONENTS LIST October 1, 2013 ... American Architectural Manufacturers Association, 1827 Walden Office

AAMA CERTIFICATION PROGRAM VERIFIED COMPONENTS LIST

October 1, 2013

Page 12 of 19

© 2013 American Architectural Manufacturers Association. All rights reserved. This material is protected by all current copyright laws. No portion of this document may be reproduced in any form or by any

means without obtaining express written authorization from the American Architectural Manufacturers Association.

American Architectural Manufacturers Association, 1827 Walden Office Square, Suite #550, Schaumburg, IL 60173 Phone: (847) 303-5664

Part Two

Materials and Components Used for Installation

SEALANTS

AAMA 711-07 (SELF ADHERING FLASHING USED FOR INSTALLATION OF EXTERIOR WALL

FENESTRATION PRODUCTS)

MANUS PRODUCTS Series Manus-Bond 64A [04/18/12]

AAMA 808.3-10 (EXTERIOR PERIMETER SEALING COMPOUND)

C.R. LAURENCE CO., INC.

CRL M64 Modified Polyurethane Construction Sealant

[11/29/12]

CRL RTV408 Industrial and Construction Silicone [01/15/13]

DOW CORNING

CWS [02/17/12]

791 [11/01/11]

HENKEL CORPORATION (OH)

OSI® TeQ::Seal™ [06/15/11]

PELLA CORPORATION

Pella Window and Door Installation Sealant [11/29/12] Pella Window and Door Installation Sealant (TS) [01/15/13]

QUANEX BUILDING PRODUCTS

Series TruSeal GS1 [11/28/12]

SCHNEE-MOREHEAD, INC. Series 2100 Cura Sil [12/07/11]

Series 7100/7108 Permathane [11/18/11]

TREMCO, INC.

Dymonic FC [04/09/12]

Spectrem 2 [04/30/12] TremGlaze U1600 [04/09/12]

Vulkem 116 [05/21/12]

ACCUMETRIC ENGINEERED PRODUCTS

BOSS 125 [05/29/12]

BOSS 396 [05/29/12] BOSS 399 [05/29/12]

BOSS Colors [05/29/12]

BOSTIK

Bostik Pro MS [05/24/13]

Chem-Calk 2000 [08/24/12] Chem-Calk 2020 [08/24/12]

CSL SILICONES, INC. CSL 335A [03/07/13]

CSL 343 [05/24/13]

DAP PRODUCTS, INC. Dynaflex 800 [09/22/11]

Sidewinder [09/22/11]

MANUS PRODUCTS

Series Manus-Bond 75GP [05/24/13]

NOVAGARD SOLUTIONS

Novaflex® MP [09/21/12] Novaflex® Multi-Purpose M Series (Type II) [01/12/12]

SBC40-M116 [01/12/12]

PREMIER INDUSTRIAL SUPPLY, INC.

Xtrabond 450 [01/15/13]

Xtrabond 9500 [11/29/12]

SHIN-ETSU SILICONES OF AMERICA

Series KEG 4500 [11/28/12]

SIKA CORPORATION (NJ)

Sikflex® 15LM [01/03/13] Sikflex® 201US [01/03/13]

Sikflex® 219LM [01/03/13]

Sikflex® 505UV [01/03/13]

Sikasil® N-Plus [06/08/12]

Sikasil® WS 295 [06/08/12]

SILCO INC.

Sil-Flex 7500 [12/11/12]

Sil-Seal 9500 [12/11/12] Ultra Flex [12/11/12]

SOUDAL, INC. SoudaSeal 50 LM [05/16/12]

SoudaSeal AP [05/16/12]

Page 13: Verified Components List - aamanet.org · AAMA CERTIFICATION PROGRAM VERIFIED COMPONENTS LIST October 1, 2013 ... American Architectural Manufacturers Association, 1827 Walden Office

AAMA CERTIFICATION PROGRAM VERIFIED COMPONENTS LIST

October 1, 2013

Page 13 of 19

© 2013 American Architectural Manufacturers Association. All rights reserved. This material is protected by all current copyright laws. No portion of this document may be reproduced in any form or by any

means without obtaining express written authorization from the American Architectural Manufacturers Association.

American Architectural Manufacturers Association, 1827 Walden Office Square, Suite #550, Schaumburg, IL 60173 Phone: (847) 303-5664

AAMA 812-10 (ASSESSMENT OF SINGLE COMPONENT AEROSOL EXPANDING

POLYURETHANE FOAMS FOR SEALING ROUGH OPENINGS OF FENESTRATION

INSTALLATIONS)

SERVICE PARTNERS, LLC

Seal Pro Window and Door Polyurethane Foam Sealant [01/07/13]

ACCUMETRIC ENGINEERED PRODUCTS BOSS 334 [01/07/13]

ADO ADO High Yield Window and Door [01/07/13]

ADO Pro High Yield Window and Door [01/07/13]

DAP PRODUCTS, INC.

DAP® Draftstop® 812 [11/19/12]

RED DEVIL, INC.

Foam and Fill – Window and Door Foam Sealant [01/07/13]

SELENA USA, INC.

Tytan Extreme Climate P-U Foam [05/30/13] Tytan Professional Window & Door P-U Foam - Straw

[01/07/13] Tytan Professional Window & Door P-U Foam - Gun

[01/07/13]

Page 14: Verified Components List - aamanet.org · AAMA CERTIFICATION PROGRAM VERIFIED COMPONENTS LIST October 1, 2013 ... American Architectural Manufacturers Association, 1827 Walden Office

AAMA CERTIFICATION PROGRAM VERIFIED COMPONENTS LIST

October 1, 2013

Page 14 of 19

© 2013 American Architectural Manufacturers Association. All rights reserved. This material is protected by all current copyright laws. No portion of this document may be reproduced in any form or by any

means without obtaining express written authorization from the American Architectural Manufacturers Association.

American Architectural Manufacturers Association, 1827 Walden Office Square, Suite #550, Schaumburg, IL 60173 Phone: (847) 303-5664

VERIFIED COMPONENT LIST MANUFACTURERS

ADCHEM CORPORATION

1852 OLD COUNTRY ROAD

RIVERHEAD, NY 11901

PH: (631) 727-6000 FAX: (631) 727-6010

CONTACT: MICHAEL THYBERG

EMAIL: [email protected]

ADHESIVES RESEARCH, INC.

400 SEAKS RUN ROAD

P.O. BOX 100

GLEN ROCK, PA 17327

PH: (717) 235-7979 FAX: (717) 235-8466

CONTACT: RICK ALEXANDER

EMAIL: [email protected]

ADVANTAGE MFG, A DIVISION OF

CALDWELL MANUFACTURING

COMPANY NORTH AMERICA, LLC.

788 OLD DUTCH ROAD

VICTOR, NY 14564

PH: (585) 742-1570 FAX: (585) 742-6287

CONTACT: GREG TURNER

EMAIL:

[email protected]

AMESBURY GROUP, INC.,

TEXTILE DIVISION

159 WALKER ROAD

STATESVILLE, NC 28625

PH: (704) 978-2895 FAX: (888) 787-0107

CONTACT: GARY FAGAN

EMAIL: [email protected]

AMESBURY GROUP – EXTRUDED

DIVISION

57 SOUTH HUNT ROAD

AMESBURY, MA 01913

PH: (978) 834-3235 FAX: (800) 289-6699

CONTACT: ASHRAF ALFI

EMAIL: [email protected]

ANTHONY INNOVATIONS PTY. LTD.

NO. 29 TIANSHAN ROAD

CHANGZHOU, JIANASU 213022

CHINA

PH: +61 3 9460-1166

CONACT: BEN ANTHONY

EMAIL: [email protected]

ASHLAND HARDWARE SYSTEMS

VIA MONTERREY

MATAMOROS #600

PARQUE INDUSTRIAL MILLENIUM

APODACA, N.L., MEXICO C.P. 66600

PH: (815) 963-9631

CONTACT: JEFF LINDSTROM

EMAIL: [email protected]

ASTRO SHAPES INC.

65 MAIN STREET

STRUTHERS, OH 44471

PH: (330) 755-1414

CONTACT: KRISTINA RULE

EMAIL: [email protected]

BLOMBERG WINDOW SYSTEMS

1453 BLAIR ST

SACRAMENTO, CA 95822

PH: (916) 428-8060 FAX: (916) 422-1967

CONTACT: CHARLIE MACHER

EMAIL:

[email protected]

BSI HARDWARE/AMESBURY GROUP

620 E 54TH STREET NORTH

SIOUX FALLS, SD 57104

PH: (800) 234-1963

CONTACT: GARY NEWMAN

EMAIL: [email protected]

CALDWELL MANUFACTURING CO.

PO BOX 92891, 2605 MANITOU RD (14624)

ROCHESTER, NY 14692

PH: (585) 352-2828 FAX: (585) 352-8806

CONTACT: MATT BRADY

EMAIL: [email protected]

CHEM LINK INC.

353 EAST LYON ST

SCHOOLCRAFT, MI 49087

PH: (269) 679-4440 FAX: (269) 679-4448

CONTACT: JAMES LARKE

EMAIL: [email protected]

COLORCOAT, INC.

125 EAST STEELS CORNERS RD

CUYAHOGA FALLS, OH 44224

PH: (916) 371-4000 FAX: (916) 371-4333

CONTACT: JIM BAUMGARTEN

EMAIL: [email protected]

COLORCOAT, INC. (CA1)

1347 TERMINAL ST.

WEST SACRAMENTO, CA 95691

PH: (916) 371-4000 FAX: (916) 371-4333

CONTACT: JIM BAUMGARTEN

EMAIL: [email protected]

COLORCOAT, INC. (CA2)

4319 SANTA ANA STREET UNIT B

ONTARIO, CA 91761

PH: (916) 371-4000 FAX: (916) 371-4333

CONTACT: JIM BAUMGARTEN

EMAIL: [email protected]

COLORCOAT, INC.

21447 SW 108TH AVE

TUALATIN, OR 97062

PH: (916) 371-4000 FAX: (916) 371-4333

CONTACT: JIM BAUMGARTEN

EMAIL: [email protected]

COMFORT LINE, LTD.

5500 ENTERPRISE BLVD.

TOLEDO, OH 43612

PH: (419) 729-8520 FAX: (419) 729-1829

CONTACT: ALLAN HITE

EMAIL: [email protected]

C.R. LAURENCE CO., INC.

2503 EAST VERNON AVENUE

LOS ANGELES, CA 90058-1897

PH: (323) 588-1281

CONTACT: GARY BYRUM

EMAIL: [email protected]

DOOR HARDWARE/AMESBURY

GROUP

620 EAST 54TH ST NORTH

SIOUX FALLS, SD 57104

PH: (605) 782-0446 FAX: (605) 336-9429

CONTACT: GARY TAGTOW

EMAIL: [email protected]

DOW CORNING CORP.

2200 WEST SALZBURG ROAD

AUBURN, MI 48611

PH: (989) 496-4000

CONTACT: KELLY ALLORE

EMAIL: [email protected]

DOW-TECH PLASTICS

1223 TAPPAN CIRCLE

CARROLLTON, TX 75006

PH: (972) 245-3333 FAX: (972) 245-4128

CONTACT: DOW POINTER

EMAIL: [email protected]

FASTEK PRODUCTS/AMESBURY

GROUP

515 NOID ROAD

CANTON, SD 57013

PH: (605) 987-4361 FAX: (605) 764-3203

CONTACT: CORBY WERON

EMAIL: [email protected]

FLEXCON INDUSTRIAL LLC

6110 RITTIMAN RD

SAN ANTONIO, TX 78218

PH: (219) 798-1910 FAX: (210) 798-1939

CONTACT: HELEN NGO

EMAIL: [email protected]

GASKA TAPE INC.

1810 W. LUSHER AVE.

ELKHART, IN 46517

PH: (574) 294-5431 FAX: (574) 522-7618

CONTACT: CHRIS HABEGGER

EMAIL: [email protected]

H. B. FULLER COMPANY

1200 WILLOW LAKE BLVD.

ST. PAUL, MN 55164

PH: (651) 236-5401 FAX: (651) 236-5119

CONTACT: JOHN GREENZWEIG

EMAIL: [email protected]

HENKEL CORPORATION(formerly

Nat'l Adhesives)

10 FINDERNE AVENUE

BRIDGEWATER, NJ 08807

PH: (908) 685-6537 FAX: (908) 685-5306

CONTACT: KEVIN SHAW

EMAIL: [email protected]

Page 15: Verified Components List - aamanet.org · AAMA CERTIFICATION PROGRAM VERIFIED COMPONENTS LIST October 1, 2013 ... American Architectural Manufacturers Association, 1827 Walden Office

AAMA CERTIFICATION PROGRAM VERIFIED COMPONENTS LIST

October 1, 2013

Page 15 of 19

© 2013 American Architectural Manufacturers Association. All rights reserved. This material is protected by all current copyright laws. No portion of this document may be reproduced in any form or by any

means without obtaining express written authorization from the American Architectural Manufacturers Association.

American Architectural Manufacturers Association, 1827 Walden Office Square, Suite #550, Schaumburg, IL 60173 Phone: (847) 303-5664

HENKEL CORPORATION

26235 FIRST STREET

WESTLAKE, OH 44145

PH: (440) 250-7792

CONTACT: MATT CANNING

EMAIL: [email protected]

INLINE FIBERGLASS

30 CONSTELLATION COURT

TORONTO, ON M9W 1K1

CANADA

PH: (416) 679-1171 FAX: (416) 679-1150

CONTACT: ANTHONY BARTOLINI

EMAIL: [email protected]

INTEK PLASTICS INC.

800 EAST 10TH STREET

HASTINGS, MN 55003

PH: (651) 480-5127 FAX: (651) 437-3805

CONTACT: JASON DOHMEN

EMAIL: [email protected]

JELD-WEN, INC.

2044 DESCHUTES DRIVE

STAYTON, OR 97383

PH: (541) 882-3451x2921

CONTACT: JASON KANTOLA

EMAIL: [email protected]

JELD-WEN, INC.

2760 PROGRESS ST SUITE B

VISTA, CA 92083

PH: (541) 882-3451x2921

CONTACT: JASON KANTOLA

EMAIL: [email protected]

JOHN EVANS’ SONS, INC.

1 SPRING AVENUE

LANSDALE, PA 19446

PH: (215) 368-7700 FAX: (215) 368-9019

CONTACT: FRED KERSHAW

EMAIL: [email protected]

KEYMARK CORPORATION

2540 KNIGHTS STATION RD.

LAKELAND, FL 33810

PH: (863) 858-5500

CONTACT: JOE CRENNA

EMAIL: [email protected]

KEYMARK CORPORATION

1188 CAYADUTTA STREET

FONDA, NY 12068

PH: (518) 853-3421 FAX: (518) 853-3130

CONTACT: MIKE DRINDAK

EMAIL: [email protected]

LIAO NING ZHONG WANG GROUP

299 WENSHENG ROAD

LIAOYANG CITY

LIAONING PROVINCE 111003

CHINA

CONTACT: CRAIG WANG

EMAIL: [email protected]

LINETEC

725 S. 75TH AVENUE

WAUSAU, WI 54401

PH: (715) 846-3822 FAX: (800) 236-2589

CONTACT: CARA BAHLOW

EMAIL: [email protected]

MILGARD MANUFACTURING, INC.

6050 88TH STREET

SACRAMENTO, CA 95628

PH: (916) 387-0700

CONTACT: MARK WERLING

EMAIL: [email protected]

MILGARD MANUFACTURING, INC.

2935 70TH AVENUE EAST

TACOMA, WA 98242

PH: (253) 926-7788

CONTACT: TERI PALMER

EMAIL: [email protected]

MILGARD MANUFACTURING, INC.

20789 SW 115TH AVE.

TUALATIN, OR 97062

PH: (503) 750-9033

CONTACT: DAN BACON

EMAIL: [email protected]

MOMENTIVE PERFORMANCE

MATERIALS

260 HUDSON RIVER ROAD

WATERFORD, NY 12188

PH: (518) 237-3330 FAX: (518) 233-3931

CONTACT: DAVID FRENCH

EMAIL: [email protected]

PELLA CORPORATION

102 MAIN ST.

PELLA, IA 50219

PH: (641) 621-6640

CONTACT: JARON VOS

EMAIL: [email protected]

P.H. TECH, INC.

8650 BOUL. DE LA RIVE-SUD

C.P/PO BOX 220

LEVIS, QC G6V 6N8

CANADA

PH: (418) 833-3231 FAX: (418) 833-6847

CONTACT: CLAUDIA LAPOINTE

EMAIL: [email protected]

PROFINE

ZWEIBRUCKER STRASSE 200

D-66954 PIRMASENS

GERMANY

CONTACT: MANFRED HUEBLER

EMAIL: [email protected]

QUANEX BUILDING PRODUCTS

800 COCHRANE AVE.

CAMBRIDGE, OH 43725

PH: 800-233-4383

CONTACT: KEVIN ZUEGE

EMAIL: [email protected]

REHAU INC.

1501 EDWARDS FERRY ROAD NE

LEESBURG, VA 20176

CONTACT: DIETER KRONENBERG

EMAIL: [email protected]

ROTO FASCO CANADA, INC.

6625 ORDAN DRIVE UNIT #1

MISSISSAUGA, ONT L5T 1X2

CANADA

PH: (905)670-8559 FAX: (905) 670-8560

CONTACT: FENG CHEN

EMAIL: [email protected]

ROTO FRANK OF AMERICA

P.O. BOX 599

RESEARCH PARK

CHESTER, CONNECTICUT 06412

PH: (860) 526-4996 x728

CONTACT: CHRIS GRIFFIN

EMAIL: [email protected]

SAPA EXTRUSIONS, INC.

450 SOUTHGATE DR.

GUELPH, ONT N1G 4P5 CANADA

PH: (905) 890-8821

CONTACT: DAVID DICK

EMAIL: [email protected]

SAPA EXTRUSIONS, INC.

5325 NE SKYPORT WAY

PORTLAND, OR 87238

PH: (503) 802-3413 FAX: (503) 802-3059

CONTACT: MICHAEL DAVIS

EMAIL: [email protected]

SAPA EXTRUSIONS, INC.

2905 OLD OAKWOOD ROAD

GAINESVILLE, GA 30504

PH: (770) 503-0389

CONTACT: BOBBY GARRETT

EMAIL: [email protected]

SAPA EXTRUSIONS, INC.

2500 ALUMAX RD.

YANKTON, SD 57078

PH: (605) 665-6063

CONTACT: JEFF HOCHSTEIN

EMAIL: [email protected]

SCHLEGEL SYSTEMS, INC.

1555 JEFFERSON ROAD

PO BOX 23197

ROCHESTER, NY 14692

PH: (585) 427-7200 FAX: (585) 475-9758

CONTACT: MARK FOSTER

EMAIL: [email protected]

ITW POLYMER SEALANTS (formerly

Schnee Morehead, Inc.)

PO BOX 171305, 111 N. NURSERY RD

IRVING, TX 75015

PH: (781) 681-0450

CONTACT: MARTHA

MITTELSTAEDT

EMAIL: [email protected]

Page 16: Verified Components List - aamanet.org · AAMA CERTIFICATION PROGRAM VERIFIED COMPONENTS LIST October 1, 2013 ... American Architectural Manufacturers Association, 1827 Walden Office

AAMA CERTIFICATION PROGRAM VERIFIED COMPONENTS LIST

October 1, 2013

Page 16 of 19

© 2013 American Architectural Manufacturers Association. All rights reserved. This material is protected by all current copyright laws. No portion of this document may be reproduced in any form or by any

means without obtaining express written authorization from the American Architectural Manufacturers Association.

American Architectural Manufacturers Association, 1827 Walden Office Square, Suite #550, Schaumburg, IL 60173 Phone: (847) 303-5664

SECURISTYLE LIMITED

KINGSMEAD INDUSTRIAL ESTATE

PRINCESS ELIZABETH WAY

CHELTENHAM, GLOUCESTERSHIRE

GL51 7RE

UNITED KINGDOM

PH: (012) 42-221200

FAX: (012) 42-234034

CONTACT: GARY DENLEY

EMAIL: [email protected]

SERVICE PARTNERS, LLC

1029 TECHNOLOGY PARK DRIVE

GLEN ALLEN, VA 23059

PH: (804) 515-7004 FAX: (804) 523-8360

CONTACT: MIKE MOREY

EMAIL: [email protected]

SIMONTON WINDOWS

2019 E. MONTE VISTA

VACAVILLE, CA 95688

PH: (888) 411-5911x3593

CONTACT: JOEL WILLIAMSON

EMAIL: [email protected]

SIMONTON WINDOWS

RT 1 BOX 61C

HARRISVILLE, WV 26362

PH: (888) 411-5911x3593

CONTACT: JOEL WILLIAMSON

EMAIL: [email protected]

STERN & COMPANY

17830 ENGLEWOOD DR. UNIT #2

CLEVELAND, OH 44130

PH: (440) 239-4200 FAX: (440) 239-4202

CONTACT: MIKE MONAGHAN

EMAIL: [email protected]

TECTON PRODUCTS

4401 15TH AVE. NW

FARGO, ND 58108

PH: (701) 277-5442

CONTACT: ROB PLAGEMANN

EMAIL:

[email protected]

TESA TAPE, INC.

5825 CARNEGIE BLVD.

CHARLOTTE, NC 28209

PH: (704) 553-4612

CONTACT: DIRK HENKE

EMAIL: [email protected]

TREMCO, INC.

215 WICKSTEED AVENUE

TORONTO, ON M4H 1G7

CANADA

PH: (216) 292-5135 FAX: (216) 766-5535

CONTACT: STEWART SNELL

EMAIL: [email protected]

TROJAN POWDER COATING CO.

1300 HARDIN AVE.

SARASOTA, FL 34243

PH: (631) 968-5040

CONTACT: KEITH REIN

EMAIL: [email protected]

TROJAN POWDER COATING CO.

2215 UNION BLVD.

BAY SHORE, NY 11706

PH: (631) 321-6717 FAX: (631) 968-5939

CONTACT: KEITH REIN

EMAIL: [email protected]

TRUSEAL TECHNOLOGIES

23150 COMMERCE PARK

BEECHWOOD, OH 44122

PH: (216) 910-1540 FAX: (216) 910-1506

CONTACT: KEVIN ZUEGE

EMAIL: [email protected]

TRUTH HARDWARE CORPORATION

PO BOX 427, 700 W. BRIDGE STREET

OWATONNA, MN 55060

PH: (507) 444-4766 FAX: (507) 451-5655

CONTACT: MIKE ZIMMERMAN

EMAIL: [email protected]

ULTRAFAB, INC.

1050 HOOK ROAD

FARMINGTON, NY 14425

PH: (585) 924-2186 FAX: (585) 924-7680

CONTACT: CHRIS BULLOCK

EMAIL: [email protected]

UNIQUE/AMESBURY HARDWARE

PRODUCTS

2061 SHERRILL DR.

STATESVILLE, NC 28625

PH: (605) 306-4762 FAX: (605) 336-9429

CONTACT: GARY NEWMAN

EMAIL: [email protected]

GTA-NHT INC.-VENTURE TAPE

PO BOX 384, 30 COMMERCE ROAD

ROCKLAND, MA 02370

PH: (800) 343-1076FAX: (781) 871-0065

CONTACT: BRIAN HOMMEL

EMAIL: [email protected]

WAI LUNG INDUSTRIAL CO., LTD

TAK WING INDUSTRIAL BLDG NO. 3

TSUN WAN ROAD

TUEN MUN, NEW TERRITORY

HONG KONG, CHINA

CONTACT: WESLEY TANG

EMAIL: [email protected]

YKK AP AMERICA

332 FIRETOWER ROAD

DUBLIN, GA 31021

PH: (478) 277-1955 FAX: (478) 277-1950

CONTACT: SHANE TANNER

EMAIL: [email protected]

ACCUMETRIC ENGINEERED

PRODUCTS

411 E. DIXIE ELIZABETHTOWN, KY 42701

PH: (270) 737-8005 FAX: (270) 765-2412

CONTACT: BRIAN JOHNSTON EMAIL: [email protected]

ACU PLASMOLD, INC.

270 ESNA PARK DR., UNIT 9-10 MARKHAM, ON L3R 1H3

CANADA

PH: (818) 276-5157

CONTACT: JOHN H. QUACH

EMAIL: [email protected]

ADCO PRODUCTS, INC.

4401 PAGE AVE./PO BOX 457

MICHIGAN CENTER, MI 49254 PH: (517) 841-7199 FAX: (517) 764-6697

CONTACT: MICHELLE PHAN

EMAIL: [email protected]

ADFAST CORPORATION

2670 PAULUS ST-LAURENT, QC H4S 1G1

CANADA

PH: (514) 617-1579 CONTACT: DENIS PERRON

EMAIL: [email protected]

ADO

2905 NORTHWEST BLVD. SUITE 230

PLYMOUTH, MN 55441 PH: (952) 885-7219

CONTACT: TORREY RICHARDSON EMAIL: [email protected]

ADHESIVE APPLICATIONS 41 O’NIEL STREET

EASTHAMPTON, MA 01027

PH: (413) 527-5030 FAX: (413) 527-0091 CONTACT: STEVE PEPIN

EMAIL: [email protected]

ADVANCED CONVERTING

TECHNOLOGIES, INC.

201 STRONACH CRESCENT LONDON, ONT N5V 3G5

CANADA

PH: (519) 659-9529

CONTACT: BONNIE KOLKMAN

EMAIL: [email protected]

ALUMINIO TEXCOCO, S.A. DE C.V.

CALLE PALMAS LOTES 10, 15 Y 16

MANZANA XII CD. INDUSTRIAL BRUNO PAGLIAI,

VERACRUZ, VER.

C.P. 91697 PH: 01 229 981 03 58

CONTACT: LETICIA FERNANDEZ

EMAIL: [email protected]

AMERICAN SEALANTS, INC.

3806 OPTION PASS FORT WAYNE, IN 46818

PH: (260) 489-0728 FAX: (260) 489-0519

CONTACT: KEVIN HARRIS EMAIL: [email protected]

ASCEND CUSTOM EXTRUSIONS, LLC 1405 MARTINEZ LN.

WYLIE, TX 75098

PH: (972) 442-7200 FAX: (972) 442-7220 CONTACT: TOMMY DAVIDSON

EMAIL: [email protected]

Page 17: Verified Components List - aamanet.org · AAMA CERTIFICATION PROGRAM VERIFIED COMPONENTS LIST October 1, 2013 ... American Architectural Manufacturers Association, 1827 Walden Office

AAMA CERTIFICATION PROGRAM VERIFIED COMPONENTS LIST

October 1, 2013

Page 17 of 19

© 2013 American Architectural Manufacturers Association. All rights reserved. This material is protected by all current copyright laws. No portion of this document may be reproduced in any form or by any

means without obtaining express written authorization from the American Architectural Manufacturers Association.

American Architectural Manufacturers Association, 1827 Walden Office Square, Suite #550, Schaumburg, IL 60173 Phone: (847) 303-5664

AZCOR INC.

57 ASHBRIDGE CIRCLE, UNIT 4 WOODBRIDGE, ON L4L 3R5

PH: (905) 856-8789

CONTACT: ROSS VALLESTEROS

EMAIL: [email protected]

BonL MANUFACTURING CO. PO BOX 279 HWY. 53

CARTHAGE, TN 37030

PH: (615) 683-8291 CONTACT: PATRICIA DRIVER

EMAIL: [email protected]

BOSTIK

1500 PARKER ROAD

CONYERS, GA 30094 PH: (215) 990-1487

CONTACT: KURT ZINTNER

EMAIL: [email protected]

BRONZE CRAFT CORP. (THE)

37 WILL STREET NASHUA, NH 03061

PH: (800) 488-7747 FAX: (603) 883-0222

CONTACT: JIM LAJEUNESSE EMAIL:[email protected]

BRT EXTRUSIONS

1818 N. MAIN ST.

NILES, OH 44446 PH: (330)544-0244

CONTACT: JAMES BYRD

EMAIL: [email protected]

CAPITAL TAPE CO., INC.

4920 COMMERCE PARKWAY CLEVELAND, OH 44128

PH: (216) 292-3455

CONTACT: NEIL SMALL EMAIL: [email protected]

CASCADE AQUA-TECH, LTD

100-3215 NORLAND AVE

BURNABY, BC V5B 3A9

CANADA PH: (604) 291-6101

CONTACT: NEIL PRITCHARD

EMAIL: [email protected]

CENTRAL PLASTICS INC.

PO BOX 903 811 WEST FIRST ST.

MCPHERSON, KS 67460

PH: (620) 241-5800 FAX: (620) 241-5799 CONTACT: MARK WILLEMS

EMAIL: [email protected]

CENTURY HARDWARE

13621 NE 126TH PL #400

KIRKLAND, WA 98034 PH: (888) 334-8400

CONTACT: TOM CAMPBELL

EMAIL: [email protected]

CRYSTAL FINISHING

2608 ROSS AVE. SCHOFIELD, WI 54476

PH: (715) 355-5351

CONTACT: MIKE SCHROEDEL

EMAIL: [email protected]

CSL SILICONES, INC. 144 WOODLAWN ROAD WEST

GUELPH, ONT N1H 1B5

CANADA PH: (519) 826-9044 FAX: (519) 836-9069

CONTACT: BAZ MISTRY

EMAIL: [email protected]

DAP PRODUCTS, INC.

2400 BOSTON STREET SUITE 200 BALTIMORE, MD 21224

PH: (410) 779-3260

CONTACT: LAN HUANG EMAIL: [email protected]

DIGGER SPECIALTIES, INC. 3639 DESTINY DRIVE

BREMEN, IN 46506

PH: (574) 546-2811 FAX: (574) 546-5099 CONTACT: JESSE HEINES

EMAIL: [email protected]

ECHO TAPE

5645 DANIELS STREET CHINO, CA 91710-9015

PH: (909) 606-5100

CONTACT: MITCHEL PORT EMAIL: [email protected]

EVERHART PAINTING LIMITED 12322 E. 1ST AVE.

SPOKANE VALLEY, WA 99216

PH: (509) 927-0920 CONTACT: DAVID EVANS

EMAIL: [email protected]

EXTRUDER’S, INC.

930 HENSLEY LANE

P.O. BOX 1719 WYLIE, TX 75098

PH: (972) 442-3535 FAX: (972) 442-1063

CONTACT: WILLIE SUMMERVILLE EMAIL: [email protected]

FRONTIER ALUMINUM CALLE LOS OLIVOS #1500

PARQUE INDUSTRIAL EL BAJIO

TECATE BC, MEXICO 21400 PH: (714) 458-9967

CONTACT: MIKE RAPPORT

EMAIL: [email protected]

GUANGDONG LUOXIANG ALUMINUM

CO. NO. 30 JINBEN PORT ROAD

SANSHUI TWON FOSHAN CITY

GUANGDONG PROVINCE CHINA

PH: (905) 643-9333

CONTACT: GREG COULTER EMAIL: [email protected]

GUANGDONG XINWEI ALUMINUM

PRODUCTS CO., LTD. NANJIANG INDUSTRIAL PARK

SIHUI CITY, GUANGDONG

CHINA

PH: (604) 671-9765

CONTACT: NORM LIEFKE

EMAIL: [email protected]

HENNIGES AUTOMOTIVE SCHLEGAL

CANADA, INC./SEALMAX 514 SOUTH SERVICE DRIVE

OAKVILLE, ON L6J 5A2

CANANDA PH: (905) 844-5039

CONTACT: CATHY KING

EMAIL: [email protected]

HOPE GLOBAL 50 MARTIN STREET

CUMBERLAND, RI02864

PH: (401) 333-8990 FAX: (401) 334-6443 CONTACT: CARLOS NEVES

EMAIL: [email protected]

JIANGYIN EAST-CHINA ALUMINUM

TECH. CO., LTD NO. 389 QINFENG ROAD, HUASHI

TOWN

JIANGYIN CITY, JIANGSU PROVINCE 214421

CHINA

PH: (0086) 510-86213931 CONTACT: ANNIE ZHANG

EMAIL: [email protected]

KERN-LIEBERS USA, INC.

1510 ALBON ROAD

HOLLAND, OH 43528 PH: (419) 865-2437 FAX: (419) 865-2738

CONTACT: JOHN HENNESSEY

EMAIL: [email protected]

LOXCREEN COMPANY CO., INC. (THE)

3715 LEEFIELD RD. BROOKLET, GA 30415

PH: (800) 569-5005

CONTACT: BRIAN HENDRIX EMAIL: [email protected]

MANUS PRODUCTS 866 INDUSTRIAL BLVD. WEST

WACONIA, MN 55837

PH: (952) 442-3323 FAX: (952) 442-3327 CONTACT: BRIAN HENJUM

EMAIL: [email protected]

MGM INDUSTRIES

287 FREEHILL ROAD

HENDERSONVILLE, TN PH: (615) 265-2046

CONTACT: ABE GASKINS

EMAIL: [email protected]

Page 18: Verified Components List - aamanet.org · AAMA CERTIFICATION PROGRAM VERIFIED COMPONENTS LIST October 1, 2013 ... American Architectural Manufacturers Association, 1827 Walden Office

AAMA CERTIFICATION PROGRAM VERIFIED COMPONENTS LIST

October 1, 2013

Page 18 of 19

© 2013 American Architectural Manufacturers Association. All rights reserved. This material is protected by all current copyright laws. No portion of this document may be reproduced in any form or by any

means without obtaining express written authorization from the American Architectural Manufacturers Association.

American Architectural Manufacturers Association, 1827 Walden Office Square, Suite #550, Schaumburg, IL 60173 Phone: (847) 303-5664

MI METALS

7555 EAST STATE RT. 69 PRESCOTT VALLEY, AZ 86314

PH: (928) 772-7001x5235

CONTACT: RED FISCHER

EMAIL: [email protected]

NORTHERN ARCHITECTURAL PRODUCTS, INC.

550 APPLEWOOD CRESCENT

BLDG. 1 CONCORD, ON L4K 4B4

CANADA

PH: (800) 446-8680 FAX: (905) 326-0487 CONTACT: PHIL KING

EMAIL: [email protected]

NOVAGARD SOLUTIONS

5109 HAMILTON AVE.

CLEVELAND, OH 44114 PH: (216) 881-8111 FAX: (216) 881-6977

CONTACT: TERRY SMITH

EMAIL: [email protected]

NUCO INC.

150 CURTIS DRIVE GUELPH, ON N1K 1N5

CANADA PH: (519) 823-4994

CONTACT: TUAN NGUYEN

EMAIL: [email protected]

PANASIA ALUMINUM CHINA, LTD.

SANLIAN SECTION, GUANGSHAN ROAD

LICHENG TOWN, ZENGCHENG CITY

GUANGDONG PROVINCE 11300 CHINA

PH: (8620) 8263-1030

FAX: (8620) 8262-7828 CONTACT: EDWARD YANG

EMAIL: [email protected]

PARADIGM WINDOWS

400 RIVERSIDE INDUSTRIAL

PARKWAY PORTLAND, ME 04103

PH: (207) 878-9701 FAX: (207) 797-6156

CONTACT: JULKA ARSOVSKI EMAIL: [email protected]

PARR TECHNOLOGIES 3200 COUNTY ROAD 6 EAST

ELKHART, IN 46514

PH: (574) 229-6318 CONTACT: JOE HOPPERT

EMAIL: [email protected]

PECORA CORPORATION

165 WAMBOLD RD.

HARLEYSVILLE, PA 19438 PH: (215) 723-6051 FAX: (215) 721-0286

CONTACT: MICHAEL MURPHY

EMAIL: [email protected]

PREMIER INDUSTRIAL SUPPLY, INC.

4282B STRAUSSER ST. NW NORTH CANTON, OH 44720

PH: (330)244-2907 FAX: (330) 244-9423

CONTACT: PAT ANDERSON

EMAIL: [email protected]

PRES-ON TAPE AND GASKET 39 FACTORY ROAD

ADDISON, IL 60101

PH: (800) 323-7467 CONTACT: JOHN GIANATASIO

EMAIL: [email protected]

PROFILE EXTRUSIONS COMPANY

PO BOX 121, ANDERSON ROAD

ROME, GA 30162 PH: (706) 234-7558 FAX: (706) 234-7649

CONTACT: DANNY THOMAS

EMAIL: [email protected]

RADISSON INDUSTRIES, INC.

136 BOUL LEON VACHON INDUSTRIEL

ST. LAMBERT DE LAUZON

QUEBEC G0S 2W0 PH: (418) 889-0103

CONTACT: CHRISTIAN CARRIER EMAIL: [email protected]

RED DEVIL, INC. 1437 SOUTH BOULDER AVE., STE 750

TULSA, OK 74119

PH: (800) 423-3845 CONTACT: MIKE GABEL

EMAIL: [email protected]

ROSATI WINDOWS

4200 ROBERTS RD.

COLUMBUS, OH 43228 CONTACT: JOHN FERGUSON

PH: (614) 777-4806

EMAIL: [email protected]

SAINT GOBAIN PERFORMANCE

PLASTICS CORP. ONE SEALANTS PARK

GRANVILLE, NY 12832

PH: (440) 725-4279 FAX: (518) 642-2793 CONTACT: ARRON POWELL

EMAIL: [email protected]

SEAL METHODS, INC.

11915 SHOE MAKER AVE

SANTA FE SPRINGS, CA 90670 CONTACT: RON MCGUIRE

PH: (800) 423-4777 FAX: (562) 946-9439

EMAIL: [email protected]

SELENA USA, INC.

21715 BECK DR. ELKHART, IN 46516

PH: (574) 523-0400 FAX: (574) 523-0499

CONTACT: RYAN KNOX EMAIL: [email protected]

SHIN-ETSU SILICONES OF AMERICA

1150 DAMAR DR. AKRON, OH 44305

PH: (317) 841-0164 FAX: (425) 988-7491

CONTACT: JOHN HEITLER JR.

EMAIL: [email protected]

SIERRA ALUMINUM 11806 PACIFIC AVE.

FONTANA, CA 92337

PH: (951) 360-8292 CONTACT: SHAYNE SEEVER

EMAIL: [email protected]

SIKA CORPORATION

995 TOWBIN AVENUE

LAKEWOOD, NJ 08701 PH: (973) 473-3330 FAX: (732) 886-5440

CONTACT: BRUCE LAKATOSH

EMAIL: [email protected]

SILCO INC.

7635 ST. CLAIR AVE. MENTOR, OH 44060

PH: (440) 975-8886 FAX: (440) 975-8887

CONTACT: DAVID GREBENEC EMAIL: [email protected]

SOUDAL, INC.

12775 RANDOLPH RIDGE LANE

MANASSAS, VA 20109 PH: (571) 535-7124 FAX: (504) 526-9386

CONTACT: PATRICK SNOEKS

EMAIL: [email protected]

TAISHAN CITY KAM KIU ALUMINUM

EXTRUSION CO., LTD. DAJIANG COUNTY

TAISHAN, GUANGDONG PROV

CHINA 529261 PH: (750) 543-2282

CONTACT: MILLY YANG

EMAIL: [email protected]

TBP CONVERTING

400 THOMAS DR. SUITE 411 PHOENIXVILLE, PA 19460

PH: (610) 482-6000 FAX: (610) 933-4710

CONTACT: DAVID SCHUR EMAIL: [email protected]

THERMAL WINDOWS, INC. 12805 E. 31st ST.

TULSA, OK 74145

PH: (800) 259-7580 CONTACT: BOBBY POOL

EMAIL: [email protected]

V. HIMARK (USA) INC.

16057 FOOTHILL BLVD.

IRWINDALE, CA 91702 PH: (626) 305-5766

CONTACT: CINDY WU

EMAIL: [email protected]

Page 19: Verified Components List - aamanet.org · AAMA CERTIFICATION PROGRAM VERIFIED COMPONENTS LIST October 1, 2013 ... American Architectural Manufacturers Association, 1827 Walden Office

AAMA CERTIFICATION PROGRAM VERIFIED COMPONENTS LIST

October 1, 2013

Page 19 of 19

© 2013 American Architectural Manufacturers Association. All rights reserved. This material is protected by all current copyright laws. No portion of this document may be reproduced in any form or by any

means without obtaining express written authorization from the American Architectural Manufacturers Association.

American Architectural Manufacturers Association, 1827 Walden Office Square, Suite #550, Schaumburg, IL 60173 Phone: (847) 303-5664

WESTERN EXTRUSIONS

1735 SANDY LAKE RD. CARROLLTON, TX 75006

PH: (972) 389-7688

CONTACT: STEVE RODRIGUEZ

EMAIL:

[email protected]

American Architectural Manufacturers Association 1827 Walden Office Square, Suite 550 Schaumburg, IL. 60173-4268 Phone (847) 303-5664 Website www.aamanet.org