verderfl ex dura 10 technical data sheet - daparak · shaft seal nbr option: viton, ptfe ......
TRANSCRIPT
Verderfl ex® Dura 10Technical Data Sheet
Description Material Description Material
Pump housing Cast Steel ASTM A216: WCB(RAL 6018 - Green)
Torque arm EN10025 Structural Steel (RAL 7021)
Front cover Polycarbonate Bearing Stainless Steel Grade EN1.4125 (440c)
Rotor Cast Aluminum A356.1Option: Cast Iron ASTM A48 class 40B
Shaft seal NBROption: Viton, PTFE
Drive shaft EN24T Steel Lubricant Verderlube - Glycerine based lubricant
Flange Stainless Steel Grade EN.14571(316) Verdersil - Silicon based lubricant
Flange coating option Halar® Anti-Corrosion coating Hose
NR, Option: NBR, EPDM & CSM
Base frame Powder Coated Mild Steel(RAL 7035 - Grey)
Weight - Complete pump including drive 42 lbs
Inverter (Optional) 6½ lbs
0.006 Gal/rev
EPDM
CSMNBRNR
0.10
0.50
0.40
0.30
0.20
Pump Speed (rpm)0 10 20 30 40 50 60 70 80 90 100
Pum
phea
d A
bsor
bed
Pow
er (H
P)
Flow Rate (GPM)
0
SP Intermittent usemax. 1 hour runningmin. 1 hour stopped
Continuous use(SP) Standard PressureRotor
Continuous use(HP) High PressureRotor
HP Intermittent usemax. 1 hour runningmin. 1 hour stopped
0.540.480.420.360.30.240.180.120.06 0.60
Prod
uct t
empe
ratu
re li
mita
tions
(˚F
)
100/140
120/160
140/175
160/195
180/215
72.5 psi
0 psi
175 psi
110 Gateway DriveMacon, Georgia 31210(877) 7VERDER (877-783-7337)FAX (877) 471-3569www.gpmpump.com
General Assembly Drawing
Verderfl ex® Dura 10Technical Data Sheet
Suitable for M8 / 1 ⁄4"
fi xing bolts
FlowGPM
Pump SpeedRPM
Installed Motor Power HP
Part NumberStd Rotor(for up to 90 PSIdischarge pressure)
Part NumberHP Rotor(for up to 115 PSIdischarge pressure)
0.08 13 1⁄8 137.0000 137.0100
0.11 18 1⁄6 137.0010 137.0110
0.14 22 1⁄5 137.0020 137.0120
0.17 28 1⁄4 137.0030 137.0130
0.21 34 1⁄3 137.0040 137.0140
0.26 42 1⁄3 137.0050 137.0150
0.34 56 1⁄2 137.0060 137.0160
0.41 67 1⁄2 137.0070 137.0170
0.52 84 1⁄2 137.0080 137.0180
■ Standard order options include NEMA 4 protection, ATEX compliant pumps, thermistors and forced fan cooling.
■ Dura pumps for discharge pressures over 115 PSI are available to special order
D10
- D
SG
- O
CT0
7
4.4
"2
.1"
15.4
"
8"8.7"
6.3
"
0.6"
2.1"
3.6
"
Please Note: These GA drawings are for guidance only. For mounting drawings please contact an authorized Verderfl ex® distributor.
Standard Pump Confi gurations(Including Natural Rubber hose)
110 Gateway DriveMacon, Georgia 31210(877) 7VERDER (877-783-7337)FAX (877) 471-3569www.gpmpump.com
Verderfl ex® Dura 15Technical Data Sheet
0.02 Gal/rev
Description Material Description Material
Pump housing Cast Steel ASTM A216: WCB(RAL 6018 - Green)
Torque arm EN10025 Structural Steel (RAL 7021)
Front cover Polycarbonate Bearing Stainless Steel Grade EN1.4125 (440c)
Rotor Cast Aluminum A356.1Option: Cast Iron ASTM A48 class 40B
Shaft seal NBROption: Viton, PTFE
Drive shaft EN24T Steel Lubricant Verderlube - Glycerine based lubricant
Flange Stainless Steel Grade EN.14571(316) Verdersil - Silicon based lubricant
Flange coating option Halar® Anti-Corrosion coating Hose
NR, Option: NBR, EPDM & CSM
Base frame Powder Coated Mild Steel(RAL 7035 - Grey)
Weight - Complete pump including drive 66 lbs
Inverter (Optional) 6½ lbs
EPDM
CSMNBRNR
0.10
0.20
0.30
0.40
0.50
0.60
0.70
Pump Speed (rpm)0 10 20 30 40 50 60 70 80 90 100
Pum
phea
d A
bsor
bed
Pow
er (H
P)
Flow Rate (GPM)20.2 0.4 0.6 0.8 1 1.2 1.4 1.6 1.8
0
0
Prod
uct t
empe
ratu
re li
mita
tions
(˚F
)
100/140
120/160
140/175
160/195
180/215
SP Intermittent usemax. 1 hour runningmin. 1 hour stopped
Continuous use(SP) Standard PressureRotor
Continuous use(HP) High PressureRotor
HP Intermittent usemax. 1 hour runningmin. 1 hour stopped
72.5 psi
175 psi
43.5 psi
0 psi
110 Gateway DriveMacon, Georgia 31210(877) 7VERDER (877-783-7337)FAX (877) 471-3569www.gpmpump.com
General Assembly Drawing
Verderfl ex® Dura 15Technical Data Sheet
D15
- D
SG
- O
CT0
7
Standard Pump Confi gurations(Including Natural Rubber hose)
Suitable for M10 / 3 ⁄8"
fi xing bolts
6.4
"2
.5"
18.0
"
10.1"10.9"
7.1"
0.7"
2.5
"3
.8"
Please Note: These GA drawings are for guidance only. For mounting drawings please contact an authorized Verderfl ex® distributor.
FlowGPM
Pump SpeedRPM
Installed Motor Power HP
Part NumberStd Rotor(for up to 90 PSIdischarge pressure)
Part NumberHP Rotor(for up to 115 PSIdischarge pressure)
0.26 13 1⁄4 137.1000 137.1100
0.36 18 1⁄3 137.1010 137.1110
0.44 22 1⁄3 137.1020 137.1120
0.56 28 1⁄2 137.1030 137.1130
0.68 34 1⁄2 137.1040 137.1140
0.84 42 1⁄2 137.1050 137.1150
1.12 56 3⁄4 137.1060 137.1160
1.35 67 3⁄4 137.1070 137.1170
1.69 84 1 137.1080 137.1180
■ Standard order options include NEMA 4 protection, ATEX compliant pumps, thermistors and forced fan cooling.
■ Dura pumps for discharge pressures over 115 PSI are available to special order
110 Gateway DriveMacon, Georgia 31210(877) 7VERDER (877-783-7337)FAX (877) 471-3569www.gpmpump.com
2.0
1.6
1.2
0.8
2.4
0.4
Pump Speed (rpm)0 10 20 30 40 50 60 70 80 90 100
Pum
phea
d A
bsor
bed
Pow
er (H
P)
Flow Rate (GPM)7.50.75 1.5 2.25 3 3.75 4.5 5.25 6 6.75
0
0
Prod
uct t
empe
ratu
re li
mita
tions
(˚F
)
100/140
120/160
140/175
160/195
180/215
72.5 psi
43.5 psi
0 psi
175 psi
SP Intermittent usemax. 1 hour runningmin. 1 hour stopped
Continuous use(SP) Standard PressureRotor
Continuous use(HP) High PressureRotor
HP Intermittent usemax. 1 hour runningmin. 1 hour stopped
Verderfl ex® Dura 25Technical Data Sheet
0.07 Gal/rev
Description Material Description Material
Pump housing Cast Steel ASTM A216: WCB(RAL 6018 - Green)
Torque arm EN10025 Structural Steel (RAL 7021)
Front cover Polycarbonate Bearing Stainless Steel Grade EN1.4125 (440c)
Rotor Cast Aluminum A356.1Option: Cast Iron ASTM A48 class 40B
Shaft seal NBROption: Viton, PTFE
Drive shaft EN24T Steel Lubricant Verderlube - Glycerine based lubricant
Flange Stainless Steel Grade EN.14571(316) Verdersil - Silicon based lubricant
Flange coating option Halar® Anti-Corrosion coating Hose
NR, Option: NBR, EPDM & CSM
Base frame Powder Coated Mild Steel(RAL 7035 - Grey)
Weight - Complete pump including drive 108 lbs
Inverter (Optional) 6½ lbs
EPDM
CSMNBRNR
110 Gateway DriveMacon, Georgia 31210(877) 7VERDER (877-783-7337)FAX (877) 471-3569www.gpmpump.com
General Assembly Drawing
Verderfl ex® Dura 25Technical Data Sheet
D2
5 -
DS
G -
OC
T07
Standard Pump Confi gurations(Including Natural Rubber hose)
FlowGPM
Pump SpeedRPM
Installed Motor Power HP
Part NumberStd Rotor(for up to 90 PSIdischarge pressure)
Part NumberHP Rotor(for up to 115 PSIdischarge pressure)
0.98 13 1⁄2 137.2000 137.2100
1.35 18 1⁄2 137.2010 137.2110
1.65 22 3⁄4 137.2020 137.2120
2.10 28 3⁄4 137.2030 137.2130
2.55 34 1 137.2040 137.2140
3.15 42 11⁄4 137.2050 137.2150
4.20 56 11⁄2 137.2060 137.2160
5.03 67 2 137.2070 137.2170
6.31 84 2 137.2080 137.2180
■ Standard order options include NEMA 4 protection, ATEX compliant pumps, thermistors and forced fan cooling.
■ Dura pumps for discharge pressures over 115 PSI are available to special order
8.9
"
3.1
"
22
.1"
10.9"
11.8"
9.4"
0.8"
3.4
"5
.4"
Suitable for M10 / 3 ⁄8"
fi xing bolts
Please Note: These GA drawings are for guidance only. For mounting drawings please contact an authorized Verderfl ex® distributor.
110 Gateway DriveMacon, Georgia 31210(877) 7VERDER (877-783-7337)FAX (877) 471-3569www.gpmpump.com
10
2 4 6 8 10 12 14 16 18 20 22 24
0
0
0
0.5
1.0
1.5
2.0
2.5
3.0
3.5
4.0
20 30 40 50 60 70 80 90 100 110 120 130 140
http://southafrica.verder.trendesign2.footsteps-cms.nl/contact/verder-map
0 psi
87 psi
174 psi
Pump Speed (rpm)
Flow (US GPM)
Pum
phea
d RM
S A
bsor
bed
Pow
er (H
P)
Continuous(Verderlube)
Intermittent min 1hr running 1 hr stopped
Intermittent min 1hr running 2 hr stopped
Continuous(Verdersil)
180/215
160/195
140/175
120/160
100/140
CSM/ EPDMNBRNR
Prod
uct T
empe
ratu
re L
imita
tions
(ºF)
Verderflex® Dura 35Technical Data Sheet
Description Material Description Material
Pump housing Cast Iron GG25(RAL 6018 - Green)
Torque arm EN10025 Structural Steel (RAL 7021)
Front cover Powder Coated Steel (RAL 7021 - Black )with Polycarbonate Inspection Window
Bearing Stainless Steel Grade EN1.4125 (440c)
Rotor Cast Iron GG25 Shaft seal VitonOption: PTFE
Drive shaft EN24T Steel Lubricant Verderlube - Glycerine based lubricant
Flange Stainless Steel Grade EN.14571(316) Universal to suit DN32 DIN PN16, 1¼“, ANSI 150# 32 mm and JIS 10k
Optional Verdersil - Silicone based lubricant
Optional Flange Materials
Polypropylene (PP) andPolyvinylidene (PVDF)
Hose
NROption: NBR, EPDM & CSM
Base frame Powder Coated Mild Steel(RAL 7021 - Grey)
Weight -Complete pump including drive
276 #
0.1725 US Gallon/rev
General Assembly Drawing
Standard Pump Configurations(Including Natural Rubber hose)
Verderflex® Dura 35Technical Data Sheet
14.64"
17.63"
13.31" SLOT CTRS
19.33" O/ALL WIDTH
10.9
" CTR
S3.
6"
26.4
" O/A
LL H
EIG
HT
0.63
"
12.8
0" O
/ALL
DEP
TH
0.5"
SLO
T
10.9
4" S
LOT
CTR
S
THIS DRAWING REMAINS THE PROPERTY OF VERDER LIMITED ANY REPRODUCTION OF ANY PART WITHOUT THE PERMISSION OF VERDER WOULD CONSTITUTE AN INFRINGMENT OF COPYRIGHT.
All dimensions are in mmDo not scale from this drawingNo part of this document maybe copied or communicatedto a 3rd party withoutpermission
Description: Date:
Scale / Size:
Drawn by:
Rev:
Assembly Number:Title:
Checked by:
Date:
Sheet:1:2 / A3
Dura 35 Bareshaft Pump Assembly position 2
00PRE-01 1of 1
134.3200 TH 10/02/09Dura 35 Bareshaft Pump Assembly
Weight (kg): Verder Ltd., Whitehouse Street,Hunslet, Leeds, LS10 1AD
Tel: 0113 2220250Fax: 0113 2220291
Notes:
FOR INFORMATION ONLY
14.64"
17.63"
13.31" SLOT CTRS
19.33" O/ALL WIDTH
10.9
" CTR
S3.
6"
26.4
" O/A
LL H
EIG
HT
0.63
"
12.8
0" O
/ALL
DEP
TH
0.5"
SLO
T
10.9
4" S
LOT
CTR
STHIS DRAWING REMAINS THE PROPERTY OF VERDER LIMITED ANY REPRODUCTION OF ANY PART WITHOUT THE PERMISSION OF VERDER WOULD CONSTITUTE AN INFRINGMENT OF COPYRIGHT.
All dimensions are in mmDo not scale from this drawingNo part of this document maybe copied or communicatedto a 3rd party withoutpermission
Description: Date:
Scale / Size:
Drawn by:
Rev:
Assembly Number:Title:
Checked by:
Date:
Sheet:1:2 / A3
Dura 35 Bareshaft Pump Assembly position 2
00PRE-01 1of 1
134.3200 TH 10/02/09Dura 35 Bareshaft Pump Assembly
Weight (kg): Verder Ltd., Whitehouse Street,Hunslet, Leeds, LS10 1AD
Tel: 0113 2220250Fax: 0113 2220291
Notes:
FOR INFORMATION ONLY
FlowGPM
Flowl/hr
Pump SpeedRPM
Part NumberStd Rotor(for up to 6 Bar discharge pressure)
Part NumberHP Rotor(for up to 12 Bardischarge pressure)
1.9 431 11 137.3200 137.33002.6 588 15 137.3210 137.33103.1 706 18 137.3220 137.33204.0 902 23 137.3230 137.33304.8 1,098 28 137.3240 137.33406.0 1,372 35 137.3250 137.33508.1 1,842 47 137.3260 137.33609.7 2,195 56 137.3270 137.337012.0 2,744 70 137.3280 137.338016.0 3,646 93 137.3290 137.339024.0 5,488 140 137.32A0 137.33A0
VERDER LtdWhitehouse Street, Hunslet, LEEDS, LS10 1AD• Tel: +44 (0)113 222 0250 • Fax: +44 (0)113 222 0291 • [email protected]
Affiliated companies: A Wien • B Aartselaar • CZ Praha • D Haan • F Eragny s/Oise • GB Leeds • H Budapest • JPN Tokyo NL Groningen/Vleuten • PL Katowice • RO Bucaresti • SA Johannesburg • USA Newtown
www.verderflex.com
■ Standard order options include NEMA 4 protection, ATEX compliant pumps, thermistors and forced fan cooling.
Please Note: These GA drawings are for guidance only. For mounting drawings please contact an authorised Verderflex® distributor.
14.64"
17.63"
13.31" SLOT CTRS
19.33" O/ALL WIDTH
10.9
" CTR
S3.
6"
26.4
" O/A
LL H
EIG
HT
0.63
"
12.8
0" O
/ALL
DEP
TH
0.5"
SLO
T
10.9
4" S
LOT
CTR
S
THIS DRAWING REMAINS THE PROPERTY OF VERDER LIMITED ANY REPRODUCTION OF ANY PART WITHOUT THE PERMISSION OF VERDER WOULD CONSTITUTE AN INFRINGMENT OF COPYRIGHT.
All dimensions are in mmDo not scale from this drawingNo part of this document maybe copied or communicatedto a 3rd party withoutpermission
Description: Date:
Scale / Size:
Drawn by:
Rev:
Assembly Number:Title:
Checked by:
Date:
Sheet:1:2 / A3
Dura 35 Bareshaft Pump Assembly position 2
00PRE-01 1of 1
134.3200 TH 10/02/09Dura 35 Bareshaft Pump Assembly
Weight (kg): Verder Ltd., Whitehouse Street,Hunslet, Leeds, LS10 1AD
Tel: 0113 2220250Fax: 0113 2220291
Notes:
FOR INFORMATION ONLY
Suitable for ½”M12 Fixing Bolts