1. Hydraulic OilHYDROVEL R & O32, 46, 68, 100, 150, 220, 320, 460IS: 3098-1983 (RA 2004), DIN 51 524 PART 1PRODUCT DESCRIPTION: HYDROVEL R & O grades are mineral oil based top quality hydraulic oils having outstandingcorrosion protection / oxidation inhibition properties. They are made from highly refined base stocks and combination ofselected additives to give the finished product with outstanding oxidation stability, water separation capability and anticorrosion properties. The use of an oil soluble type foam suppressant provides HYDROVEL R & O series excellentantifoam characteristics.APPLICATION: HYDROVEL R & O series are suggested for moderate hydraulic systems and wide variety of circulatingsystems of industrial equipments.PERFORMANCE LEVEL: Meets IS: 3098-1983 (RA 2004), DIN 51 524 PART 1These are typical figures and do not constitute a specification. In pursuit of continuous improvement, these figures may be changed without notice atthe sole discretion of Nandan Petrochem Ltd.200Product Data SheetTypical Properties40-37-3 (30)40-37-3 (20)CHARACTERISTICS HYDROVEL R & OGrades 32 46 68 100 150 220 320 460Kinematic Viscosity @40C, cSt. 30-34 43-49 66-72 95-105 145-160 210-230 300-340 440 -480Viscosity Index, Min. 95 95 95 90 90 90 90 90Flash Point ,COC,C,Min. 190 200 220 220 220 230 250 250Pour Point, C, Max. (-)6 (-)3 (-)3 (-)3 (-)3 (-)3 (-)3 (-)3Copper strip Corrosion for 3 hrs @100C. 1 1 1 1 1 1 1 1Rust prevention Test, 24 hrs. Passes Passes Passes Passes Passes Passes Passes PassesFoam Characteristics: Foam stability after10 minutes settling time ,foam ml,seq I/II/III Nil Nil Nil Nil Nil Nil Nil NilEmulsion characteristics, Max.Rev.No. 01-01/04/2013

2. These are typical figures and do not constitute a specification. In pursuit of continuous improvement, these figures may be changed without notice atthe sole discretion of Nandan Petrochem Ltd.PRODUCT DESCRIPTION : HYDROVEL AW grades are blends of high viscosity index, chemically stable base oilsand specially selected anti-wear, anti-oxidation, anti-rust and anti-foam additives. These oils have gooddemulsibility characteristics. They meet the requirements of very high pressure systems (1000 psi and above) andalso of systems where high speed actuations are desired.APPLICATION : HYDROVEL AW grades are extensively used to actuate various mechanisms of special purposemachines, positive displacement pumps such as axial, piston, vane and gear types etc. They can also be used inenclosed gear boxes, compressors, chain drives, machine tools, circulation oiling systems, etc.PERFORMANCE LEVEL : HYDROVEL AW 32 TO AW 150 grades Meet IS 10522 1983 (RA 1998), DIN 51 524 PART 1.Product Data SheetHydraulic OilHYDROVEL AW32, 46, 68, 100, 150, 220, 320, 460IS: 10522-1983(RA 1998), DIN 51 524 PART 1.Typical PropertiesCHARACTERISTICS HYDROVEL AWGrades 32 46 68 100 150 220 320 460Kinematic Viscosity @40C, cSt. 30-34 43-49 66-72 95-105 145-160 210-230 300-340 440 -480Viscosity Index, Min. 95 95 95 90 90 90 90 90Flash Point ,COC,C,Min. 200 200 220 220 230 240 250 250Pour Point, C, Max. (-)6 (-)6 (-)6 (-)6 (-)6 (-)6 (-)6 (-)6Copper strip Corrosion for 3 hrs @100C. 1 1 1 1 1 1 1 1Rust prevention Test, 24 hrs. Passes Passes Passes Passes Passes Passes Passes PassesFoam Characteristics: Foam stability after10 minutes settling time ,foam ml,seq I/II/III Nil Nil Nil Nil Nil Nil Nil NilEmulsion characteristics, Max.20040-37-3(20)40-37-3(30)Rev.No. 01-01/04/2013 3. 100These are typical figures and do not constitute a specification. In pursuit of continuous improvement, these figures may be changed without notice atthe sole discretion of Nandan Petrochem Ltd.Hydraulic OilHYDROVEL HLP32, 46, 68, 100, 150IS: 11656-1986 (RA 2002),DIN 51524 PART II,HLP TypePRODUCT DESCRIPTION: HYDROVEL HLP oils are premium grade extra heavy duty antiwear hydraulic oils (HLP Type)with outstanding thermal & oxidation stability and have exceptional load carrying capacity as indicated by high FZGrating (11 Stage Pass). These oils are blended from highly refined selected base stocks fortified with high qualityantioxidant, antiwear additives to satisfy the increased demands of thermal and oxidation stability of modern fluids.These oils have excellent hydrolytic stability, demulsibility, air release characteristic and have good filterability.APPLICATION: HYDROVEL HLP are recommended for high pressure hydraulic systems, especially for sophisticatedhigh performance electro hydraulic or numerically controlled system, in hydraulic couplings and drive motor bearings.These oils can also be used in screw compressor and enclosed gear boxes due to their outstanding thermal andoxidation stability.PERFORMANCE LEVEL: Meets IS: 11656 -1986 (RA 2002), DIN 51 524 Part II, HLP TypeProduct Data SheetTypical PropertiesCHARACTERISTICS HYDROVEL HLPGrades 32 46 68 100 150Kinematic Viscosity @40C, cSt. 30-34 44-48 68-74 95-105 145-160Viscosity Index, Min. 105 100 100 100 95Flash Point ,COC,C,Min. 200 200 220 250 250Pour Point, C, Max. (-)9 (-)9 (-)9 (-)6 (-)6Copper strip Corrosion for 3 hrs @100C. 1 1 1 1 1Rust prevention Test, 24 hrs. Passes Passes Passes Passes PassesTotal Acidity (mg of KOH/g of oil) 1 1 1 1 1Foam Characteristics: Foam stability after10 minutes settling time ,foam ml,seq I/II/III Nil Nil Nil Nil NilEmulsion characteristics, Max. 40-37-3 (20) 40-37-3 (20) 40-37-3 (20) 40-37-3 (30) 40-37-3 (30)Rev.No. 01-01/04/2013 4. IS: 11656-1986 (RA 2002),DIN 51524 PART IIIRev.No. 01-01/04/2013 5. 100These are typical figures and do not constitute a specification. In pursuit of continuous improvement, these figures may be changed without notice atthe sole discretion of Nandan Petrochem Ltd.Spindle OilSPINVEL5, 12, 22IS: 493 , PART II - 1981 ( RA 2004)PRODUCT DESCRIPTION: SPINVEL Grades are blended from highly refined hydrotreated oils and have beenincorporated with antioxidant, antirust additives to meet the requirements of Textile Machineries particularly. They havelow pour point, high viscosity index and have good demulsibility characteristic also. They reduce the rate of wear, lowerthe power consumption, eliminate spindle sticking and protects against corrosion.APPLICATION: SPINVEL Grades are suitable for high speed spindles in textile machineries operating at very highspeeds and other machine tools where high speed and moderate loads are encountered.PERFORMANCE LEVEL: Meets IS: 493 PART II-1981 (RA 2004).Product Data SheetTypical PropertiesCHARACTERISTICS SPINVELGrades 5 12 22Kinematic Viscosity @40C, cSt. 4.5-5.5 11-13 20-24Viscosity Index, Min. 90 90 90Flash Point ,PMCC**/COC,C,Min. **90 160 180Pour Point, C, Max. (-)6 (-)6 (-)6Copper strip Corrosion for 3 hrs @100C. 1 1 1Rev.No. 01-01/04/2013 6. These are typical figures and do not constitute a specification. In pursuit of continuous improvement, these figures may be changed without notice atthe sole discretion of Nandan Petrochem Ltd.Machine OilMACHINEVEL32, 46, 68, 100, 150, 220, 320, 460IS: 493, PART I -1981 (RA 2004)PRODUCT DESCRIPTION: MACHINEVEL grades blended from high viscosity index base stocks. They have good inherentoxidation and thermal stability with excellent ability to separate from water. MACHINEVEL oils are specially formulated withadditives to improve adhesiveness and film strength characteristics.APPLICATION: MACHINEVEL grades recommended preferably for non-critical all loss lubrication systems and otherapplications such as lubrication of bearings, open gears, light loaded slides and guide ways of machine tools. They are alsorecommended for lubrication of looms in the textile mills and other applications which do not require additive containinglubricants. These oils can also be used for flushing of inaccessible internal surfaces of various automotive and industrialequipment.PERFORMANCELEVEL: MeetsIS:493(Part1):1981[RA2004]Product Data SheetTypical PropertiesCHARACTERISTICS MACHINEVELGrades 32 46 68 100 150 220 320 460Kinematic Viscosity @40C, cSt. 30-34 44-48 66-72 95-105 145-155 216-224 315-325 450-470Viscosity Index, Min. 90 90 90 90 90 90 90 90Flash Point ,COC,C,Min. 200 200 220 220 220 240 250 250Pour Point, C, Max. (-)6 (-)6 (-)6 (-)6 (-)6 (-)6 (-)3 (-)3Copper strip Corrosion for3 hrs @100C. 1 1 1 1 1 1 1 150Rev.No. 01-01/04/2013 7. 200These are typical figures and do not constitute a specification. In pursuit of continuous improvement, these figures may be changed without notice atthe sole discretion of Nandan Petrochem Ltd.Industrial Gear OilGEARVEL68, 100, 150, 220, 320, 460IS: 8406-1993(RA 2006), DIN 51517 Part 3PRODUCT DESCRIPTION: GEARVEL grades are premium quality lubricants fortified with sulphur-phosphorous type ofEP additives. They have excellent anti-foam, anti-rust, anti-oxidation and demulsification characteristics making themideal for systems subjected to heavy shock loads. GEARVEL grades are marketed over a wide viscosity ranges totake care of the variety of speed-load conditions encountered by the industries. These oils contain chemically activeadditives, which react with the metals of the gears teeth to form an anti-welding film between them.APPLICATION: GEARVEL grades are recommended for all heavy duty enclosed gear drives with circulation or splashlubrication system operating under heavy or shock load conditions up to a temperature of 100C.PERFORMANCE LEVEL: Meets IS: 8406 1993 (RA 2006), DIN 51517 Part 3.Product Data SheetTypical PropertiesCHARACTERISTICS GEARVELGrades 68 100 150 220 320 460Kinematic Viscosity @40C, cSt. 66-74 95-105 145-160 210-230 310-335 440-480Viscosity Index, Min. 95 95 95 90 90 90Flash Point ,COC,C,Min. 200 210 220 220 220 230Pour Point, C, Max. (-)6 (-)6 (-)6 (-)3 (-)3 (-)3Copper strip Corrosion for 3 hrs @100C. 1 1 1 1 1 1Rust prevention Test, 24 hrs. Passes Passes Passes Passes Passes PassesFoam Characteristics: Foam stability after 10minutes settling time ,foam ml,seq I/II/III Nil Nil Nil Nil Nil NilRev.No. 01-01/04/2013 8. 200These are typical figures and do not constitute a specification. In pursuit of continuous improvement, these figures may be changed without notice atthe sole discretion of Nandan Petrochem Ltd.GEARVEL PLUSIndustrial Gear Oil68,100,150,220,320,460IS:8406-1993 ( RA 2006) DIN -51517 Part 3Typical PropertiesDESCRIPTION: GEARVEL PLUS range of oils are Extra Premium quality lubricants fortified with sulphur-phosphoroustype of EP additives. They have excellent anti-foam, anti-rust, anti-oxidation and demulsification characteristics makingthem ideal for systems subjected to heavy shock loads. GEARVEL PLUS Oils are marketed over a wide viscosityranges to take care of the variety of speed-load conditions encountered by the industries. These oils containchemically active additives, which react with the metals of the gearss teeth to form an anti-welding film betweenthem. Specialty Grade EP additives provides high tenacity and very high load withstand features, with extremely lowevaporation loss.APPLICATION: GEARVEL PLUS ranges are recommended for all heavy duty enclosed gear drives with circulation orsplash lubrication system operating under heavy or shock load conditions up to a temperature of 100C. Gearvel Plus460 specially recommended for crane gear boxes & Worm Gear boxes with extended oil change intervals and minimumoil top up.PERFORMANCE LEVEL: Meet IS: 8406 - 1993 (RA 2006), DIN 51517 Part 3 specifications.Product Data SheetCHARACTERISTICS GEARVEL PLUSGrades 68 100 150 220 320 460Kinematic Viscosity @40C, cSt. 66-74 95-105 145-160 210-230 310-330 440-480Viscosity Index, Min. 135 135 135 125 115 110Flash Point ,COC,C,Min. 200 210 220 220 220 230Pour Point, C, Max. (-)6 (-)6 (-)6 (-)3 (-)3 (-)3Copper strip Corrosion for 3 hrs @100C. 1 1 1 1 1 1Rust prevention Test, 24 hrs. Passes Passes Passes Passes Passes PassesFoam Characteristics: Foam stability after10 minutes settling time ,foam ml,seq I/II/III Nil Nil Nil Nil Nil NilRev.No. 01-01/04/2013 9. TRANSVEL C-4 SAE 30Product Data SheetTypical PropertiesThese are typical figures and do not constitute a specification. In pursuit of continuous improvement, these figures may be changed without notice atthe sole discretion of Nandan Petrochem Ltd.Transmission OILCharacteristics Test Method SpecificationColour Visual RedK.Viscosity @100 C IS 1448 P: 25 9.3-12.5Viscosity Index, Min. IS 1448 P: 56 90Flash Point ,C,Min. IS 1448 P: 69 160Pour Point,C, Max. IS 1448 P: 10 (-)18Product Description : TRANSVEL C-4 SAE 30 Oil is blended using highly refined virgin base stocks with specialadditives to impart high oxidation stability, anti-wear, anti-rust, anti-foam and the desired frictional characteristics inservice. It is compatible with the seal material used in hydraulic transmissions systems. TRANSVEL C-4 SAE 30 ishydraulic transmission to meet General Motors Detroit Diesl ALLISON type C-4 specifications.Application : TRANSVEL C-4 SAE 30 oil is recommended for commercial power transmissions, industrial torqueconverters and automatic transmissions manufactured by AVTEC Ltd.,Hosur,erstwhile power products division ofHindustan Motors Ltd,under License from General Motors USA.Such hauling and cycling transmissions are fitted on awide variety of Allison heavy duty automatic Transmissions fitted to On-highway and off-highway equipmentse.g.Dumpers,scrappers,Shovel loaders,Excavators,Crawler-Tractors,etc.,used in Mines, cement quarries and Damconstruction sites etc.BENEFITS: Smooth operation of precision hydraulic control systems. Smoother engagement / disengagement of clutch, because of desired friction properties to provide a soft shift feel. Provides Protection against wear, rust and corrosion. Provide excellent seal life.PERFORMANCE LEVEL: TES-228 for Hhydraulic transmission fluid type C-4 of Detroit Diesl ALLISON Division ofGeneralGrade: TES 228Rev.No. 01-01/04/2013 10. Transmission OILTRANSVEL SAE 10 WCharacteristics Test Method SpecificationK.Viscosity @100 C, cSt IS 1448 P: 25 5.6Viscosity Index, Min. IS 1448 P: 56 100Flash Point,C,Min. IS 1448 P: 69 200Pour Point,C,Max. IS 1448 P: 10 (-)27TBN mg KOH/gm, Min. IS 1448 P:86 8.0Sulphated Ash, mass % Max. IS 1448 P:4 1.50Product Data SheetTypical PropertiesThese are typical figures and do not constitute a specification. In pursuit of continuous improvement, these figures may be changed without notice atthe sole discretion of Nandan Petrochem Ltd.Product Description : TRANSVEL SAE 10W is formulated with highly refined base oils combined with ash lessdispersant, metallo-organic detergent and effective corrosion and oxidation inhibitor to meet the performance standards.Application: TRANSVEL SAE 10W oil is recommended for all classes of supercharged diesel engines of high speedoutput such as Heavy Duty Diesel Vehicles / Tractors, Earthmoving/off Highway equipments, Transmission systems ofcaterpillar Equipment and large generating sets.TRANSVEL SAE 10W meets the requirements of Hydraulic fluid type C2 specification of Detroit Diesel Allision, Division ofGeneral Motors Corporation, USA.BENEFITS Minimizes deposits & wear Prevent Rust and Corrosion Maintain excellent engine cleanliness Minimize deposits resulting from high output, low speed, and low temperature operations. Excellent control of cold sludge and corrosive wear Possess excellent oxidation stability to ensure long service life especially in Transmission systems.PERFORMANCE LEVEL: API CD, US MIL-L-45199B, IS: 13656-2002 E-DL2, Caterpillar Series 3API CD, MIL-L-45199B, IS: 13656-2002 E-DL2, Caterpillar Series 3Rev.No. 01-01/04/2013 11. These are typical figures and do not constitute a specification. In pursuit of continuous improvement, these figures may be changed without notice atthe sole discretion of Nandan Petrochem Ltd.Compressor OilCOMPRESSVEL68, 100, 150IS: 13256-1992(RA 2004) TYPE DAA, DIN 51506 VD -LPRODUCT DESCRIPTION: COMPRESSVEL grades are manufactured from highly refined base stocks with oxidation,rust, corrosion and foam inhibitors. They provide excellent lubrication under high temperature and high load conditionswith low carbon-forming tendency and protection against entrained air. COMPRESSSVEL grades are designed toprovide superior thermal and oxidation stability and rust protection.APPLICATION: COMPRESSVEL are recommended for use in the cylinder lubrication of reciprocating and rotary aircompressors operating up to 220C air discharge temperature.PERFORMANCE LEVEL: Meets IS 13256 1992 (RA 2004) TYPE DAA, DIN 51506 VD LProduct Data SheetTypical PropertiesCHARACTERISTICS COMPRESSVEL68 100 150Kinematic Viscosity @40C, cSt. 66-70 95-105 145-160Viscosity Index, Min. 100 100 100Flash Point ,COC,C,Min. 230 230 240Pour Point, C, Max. (-)12 (-)9 (-)6Copper strip Corrosion for 3 hrs @100C. 1 1 1Emulsion characteristic ,Max 40-40- 40-40- 40-40-0(10) 0(10) 0(20)Rust Preventing characteristic Passes Passes Passes200Rev.No. 01-01/04/2013 12. These are typical figures and do not constitute a specification. In pursuit of continuous improvement, these figures may be changed without notice atthe sole discretion of Nandan Petrochem Ltd.Machine Tool Way OilWAYVEL32, 68, 220PROPERITORY GRADEPRODUCT DESCRIPTION: WAYVEL grades are manufactured from highly refined base stocks with high oxidationstability and are formulated with oiliness, extreme pressure, anti - foam and tackiness additives. These oils providessmooth, chatter free operations by carrying out higher load of machine tools with minimum stick-slip and improvedsurface finish of the work pieceAPPLICATION: WAYVEL grades are recommended for the lubrication of horizontal and vertical machine tool slide waysand guides, planers, grinders, shapers etc.PERFORMANCE LEVEL: Proprietary GradeProduct Data SheetTypical PropertiesCHARACTERISTICS WAYVEL32 68 220Kinematic Viscosity @40C, cSt. 30-34 64-72 210-230Viscosity Index, Min. 95 95 95Flash Point ,COC,C,Min. 190 210 240Pour Point, C, Max. (-)3 (-)3 (-)350Rev.No. 01-01/04/2013 13. 100These are typical figures and do not constitute a specification. In pursuit of continuous improvement, these figures may be changed without notice atthe sole discretion of Nandan Petrochem Ltd.Heat Transfer OilTHERMVEL32, 100PROPERITORY GRADEPRODUCT DESCRIPTION: THERMVEL grades are highly refined mineral oils with exceptional inherent oxidationstability, strong thermal stability and good heat transfer properties for use as Industrial Heat transfer Fluids .These Oilsalso possess low Volatility to minimize evaporation loss in the open systems and low vapour pressure to eliminatevapour lock in the circulating pumps for long and trouble free service life in heat transfer systems.APPLICATION: THERMVEL grades are recommended for use as heat transfer fluids in well-designed open heat transfersystems operating up to 260C and up to 300C for closed system. The products find extensive applications in Textile,Pharmaceuticals, Chemicals and other processing Industries.PERFORMANCE LEVEL: Proprietary GradeProduct Data SheetTypical PropertiesCHARACTERISTICS THERMVELGrade 32 100Kinematic Viscosity @40C, cSt. 30-34 95-105Viscosity Index, Min. 95 95Flash Point ,COC,C,Min. 190 210Pour Point, C, Max. (-)3 (-)3Operating Temperature Range,C 260-300Rev.No. 01-01/04/2013 14. Heat Transfer OilTHERMVEL SPECIAL32, 100PROPERITORY GRADEPRODUCT DESCRIPTION: THERMVEL SPECIAL grades are blended from light coloured high viscosity index basestocks having good oxidation and thermal stability with specially selected antioxidants for extra long service life of theseIndustrial Heat Transfer fluids. These Industrial Heat Transfer fluids have also very low level of volatility, vapour pressure,sulphur content and CCR value to provide superior performance.APPLICATION: THERMVEL SPECIAL grades are recommended for use as heat transfer fluids in well-designed openheat transfer systems operating up to 280C and up to 315C for closed system. The products find extensiveapplications in Textile, Pharmaceuticals, Chemical and other processing IndustriesPERFORMANCE LEVEL: Proprietary GradeProduct Data SheetTypical PropertiesCHARACTERISTICS THERMVEL SPECIAL32 100Kinematic Viscosity @40C, cSt. 30-34 95-105Viscosity Index, Min. 110 100Flash Point ,COC,C,Min. 200 230Pour Point, C, Max. (-)9 (-)9Operating Temperature Range,C 280-315These are typical figures and do not constitute a specification. In pursuit of continuous improvement, these figures may be changed without notice atthe sole discretion of Nandan Petrochem Ltd.100Rev.No. 01-01/04/2013 15. 200Soluble Cutting OilCUTVEL SIS:1115 - 1986 (RA 2002)PRODUCT DESCRIPTION: CUTVEL S is a MULTI-PURPOSE SOLUBLE CUTTING OIL manufactured from carefullyselected paraffinic base oils and proprietary emulsifiers which have a bearing on the stability of the emulsioneven with water of 400 ppm hardness. A stable milky white emulsion is prepared by adding the oil to water withcontinuous stirring. CUTVEL S gives the desired cooling characteristics, provides rust protection, lubricity for the cuttingoperation with good finish of work piece and longer life for tools. CUTVEL S is also fortified with appropriate biocides tokeep control of bacterial growth.APPLICATION: CUTVEL S is recommended for a variety of cutting operations on both ferrous and non-ferrous metals.For general machining operations the emulsion is normally prepared with 5% oil and for grinding operation theemulsion has 2% of oil.CAUTION : Not recommended for machining of magnesium as fine chips of magnesium is a fire hazard whenmoistened with water.PERFORMANCE LEVEL: Meets IS 1115-1986 (RA 2002).Product Data SheetTypical PropertiesCHARACTERISTICS CUTVEL SWater, % mass, Max. 10.0Copper strip corrosion at 100C for 3 Hrs, Max. 1 (a)Emulsion Stability Test ,5:1 and 20:1 ratio inwater of 400 ppm hardness PassesThermal stability Test PassesAsh, % by mass, Max. 3.5Frothing Test , 5:1 and 20:1 ratio in water of 200 ppm PassesFlash Point,COC,C, Min. 150Cast Iron corrosion test 0/1-1These are typical figures and do not constitute a specification. In pursuit of continuous improvement, these figures may be changed without notice atthe sole discretion of Nandan Petrochem Ltd.Rev.No. 01-01/04/2013 16. 200DESCRIPTION: CUTVEL S PLUS is a PREMIUM SOLUBLE CUTTING OIL manufactured from carefully selectedparaffinic base oils and proprietary emulsifiers which have a bearing on the stability of long lasting emulsion evenwith water of 400 ppm hardness.CUTVEL S PLUS gives the desired cooling characteristics and effective foam control, provides rust and corrosionprotections with required lubricity for the cutting operations with good finish of work pieces and longer life for tools.CUTVEL S PLUS is also fortified with appropriate biocides to keep control of bacterial growth even during machineshutdown period.A stable milky white emulsion is prepared by adding the oil to water, with continuous stirringAPPLICATION: CUTVEL S PLUS is recommended for a variety of cutting operations on both ferrous and non-ferrousmetals. For general machining operations the emulsion is normally prepared with 5 % oil and for grindingoperation the emulsion has 2% of oil.CAUTION : Not recommended for machining of magnesium as fine chips of magnesium is a fire hazard whenmoistened with water.PERFORMANCE LEVEL: Meets IS 1115-1986 (RA 2002) performance requirements.Product Data SheetTypical PropertiesCHARACTERISTICS CUTVEL S PLUSEmulsion Stability & Frothing PassesCopper Strip Corrosion at 100C for 3 hours 1aCast Iron Corrosion Test 0/1-1Thermal stability Test PassesFlash Point,COC,C, Min. 150pH of 5% emulsion 9.2 (Typical)Cutvel S PlusSoluble Cutting OilIS: 1115-1986 (RA 2002)These are typical figures and do not constitute a specification. In pursuit of continuous improvement, these figures may be changed without notice atthe sole discretion of Nandan Petrochem Ltd.Rev.No. 01-01/04/2013 17. CHARACTERISTICS CUTVEL N 12Kinematic Viscosity @40C,cSt 11-13Flash Point,COC,C, Min. 150Copper strip corrosion @ 100C for 3 Hrs, Min 4Sap Value, mg KOH/gm, Min 5PRODUCT DESCRIPTION: CUTVEL N 12 contains active and non-active sulphur, fatty oil and chlorinated additives togive better surface finish and longer life of cutting tools over a wide range of operating temperatures by providing anexcellent lubricating film which resists cutting stresses.APPLICATION: CUTVEL N 12 is recommended for severe machining operations of gear cutting, broaching andthreading of alloys and stainless steels, where low viscosity oil is required.The product is NOT recommended for use on non-ferrous metals.PERFORMANCE LEVEL: Proprietary GradeProduct Data SheetTypical PropertiesNeat Cutting OilCUTVEL N 12Proprietary GradeThese are typical figures and do not constitute a specification. In pursuit of continuous improvement, these figures may be changed without notice atthe sole discretion of Nandan Petrochem Ltd.50Rev.No. 01-01/04/2013 18. Neat Cutting OilCUTVEL N 102IS: 3065 -1985(RA 2002) TYPE 1 GRADE IIPRODUCT DESCRIPTION: CUTVEL N 102 is blended from highly refined base stocks with fatty oils and chlorinatedadditives for a wide range of machining operations with good surface finish without discolouration of the work piece. Itminimizes the tools from excessive wear during use.APPLICATION: CUTVEL N 102 is recommended for multipurpose machining operations of ferrous and non-ferrousmetals including different grinding and milling operations.PERFORMANCE LEVEL: Meets IS: 3065-1985 (RA 2002), TYPE 1, Grade IIProduct Data SheetTypical PropertiesCHARACTERISTICS CUTVEL N 102Kinematic Viscosity @40C,cSt 20-24Flash Point,COC,C, Min. 160Copper strip corrosion at 100C for 3 Hrs, Max. 1Sap Value, mg KOH/gm 9-11These are typical figures and do not constitute a specification. In pursuit of continuous improvement, these figures may be changed without notice atthe sole discretion of Nandan Petrochem Ltd.100Rev.No. 01-01/04/2013 19. Neat Cutting OilCUTVEL N 203IS:3065-1985 (RA 2002) TYPE 2 GRADE IIIPRODUCT DESCRIPTION: CUTVEL N 203 contains highly refined base oils with inactive sulphurised fatty oil. It can beused for a wide range of machining operations with good surface finish without discolouration of the work piece. Itminimizes the tools from excessive wear during use.APPLICATION: CUTVEL N 203 is recommended for multipurpose machining operations of ferrous and non-ferrousmetals where severity of machining is not encountered.PERFORMANCE LEVEL: Meets IS: 3065-1985 (RA 2002), TYPE 2, Grade IIIProduct Data SheetTypical PropertiesCHARACTERISTICS CUTVEL N 203Kinematic Viscosity @40C,cSt 32-36Flash Point,COC,C, Min. 160Copper strip corrosion at 100C for 3 Hrs, Max. 1Sap Value, mg KOH/gm 9-11These are typical figures and do not constitute a specification. In pursuit of continuous improvement, these figures may be changed without notice atthe sole discretion of Nandan Petrochem Ltd.100Rev.No. 01-01/04/2013 20. Neat Cutting OilCUTVEL N 15GRADE: IS: 3065-1985 (RA 2002), TYPE 3, Grade ICHARACTERISTICS CUTVEL N 15Kinematic Viscosity @40C,cSt 15-20Flash Point,COC,C, Min. 160Copper strip corrosion @ 100C for 3 Hrs, Min. 4Sap Value, mg KOH/gm, Min 5PRODUCT DESCRIPTION: CUTVEL N 15 contains active and non-active sulphur, fatty oil and chlorinated additives togive better surface finish and longer life of cutting tools over a wide range of operating temperatures by providing anexcellent lubricating film which resists cutting stresses.APPLICATION: CUTVEL N 15 is recommended for severe machining operations of gear cutting, broaching andthreading of alloys and stainless steels, where moderate viscosity oil is required.The product is NOT recommended for use on non-ferrous metals.PERFORMANCE LEVEL: CUTVEL N 15 meets the requirement of IS: 3065-1985 (RA 2002), TYPE 3, Grade IProduct Data SheetTypical PropertiesThese are typical figures and do not constitute a specification. In pursuit of continuous improvement, these figures may be changed without notice atthe sole discretion of Nandan Petrochem Ltd.50Rev.No. 01-01/04/2013 21. 100Neat Cutting OilCUTVEL N 302IS: 3065 -1985 (RA 2002) TYPE 3 GRADE IIPRODUCT DESCRIPTION: CUTVEL N 302 contains active and non-active sulphur, fatty oil and chlorinated additives togive better surface finish and longer life of cutting tools over a wide range of operating temperatures by providingexcellent lubricating film which resists cutting stresses.APPLICATION: CUTVEL N 302 is recommended for machining operations of gear cutting, broaching and threading ofalloys and stainless steels, where moderate viscosity oil is required.The product is NOT recommended for use on non-ferrous metals.PERFORMANCE LEVEL: Meets IS: 3065-1985 (RA 2002), TYPE 3, Grade IIProduct Data SheetTypical PropertiesCHARACTERISTICS CUTVEL N 302Kinematic Viscosity @40C,cSt 34-40Flash Point,COC,C, Min. 160Copper strip corrosion at 100C for 3 Hrs, Min. 4Sap Value, mg KOH/gm, Min 10These are typical figures and do not constitute a specification. In pursuit of continuous improvement, these figures may be changed without notice atthe sole discretion of Nandan Petrochem Ltd.Rev.No. 01-01/04/2013 22. These are typical figures and do not constitute a specification. In pursuit of continuous improvement, these figures may be changed without notice atthe sole discretion of Nandan Petrochem Ltd.CHARACTERISTICS EDMVEL 2Colour, ASTM, Max. 1.0Kinematic Viscosity at 40C, cSt 2.0-3.0Flash Point, COC, C, Min. 90Copper Strip Corrosion for 3 Hrs. at 100C. 1PRODUCT DESCRIPTION: EDMVEL 2 is highly refined oil, recommended for submerged ram-type electrical dischargemachining of dies and other complex recessed shapes. This is a low viscosity oil with high flash point, slight odor andhas natural resistance to oxidation. Its low level of volatility provides dependable safety and minimal loss fromevaporation during use. The high dielectric constant promotes an efficient energy -to-work ratio. The electric spark isconcentrated between the electrode and work piece for maximum metal removal and minimum scattering and energyloss that may lead to overheating and premature oxidation. As a result EDMVEL 2 provides extended service life withminimum power consumption.APPLICATION: In all electrical discharge machines working by penetration especially for roughing, finishing and superfinishing work where a high removal rate is required For submerged ram-type electrical discharge machining of dies andother complex recessed shapes. The requirements for insulation and controlled dielectric discharge during electricdischarge machining operations.BENEFITS: Highly refined, bright and light colored low viscosity product with low odour Good heat transfer with high oxidation resistance to degradation for extended product life Quick chip removal properties for efficient EDM operation and better surface finish. Relating high flash point ensures no generation of fume and safety from fire hazards Optimum setting action and excellent filterability through cartridge eliminates clogging of fine orifices and valves. High wetability ensures liquid /metal contact with low electrode wear and uniform insulation Non-corrosive and requires least topping up quantity Low skin sensitivity in normal use for non-toxicity of the product.PERFORMANCE LEVEL: proprietary gradeProduct Data SheetTypical PropertiesSpark Errossion OilEDMVEL 2Grade: Proprietry Grade50Rev.No. 01-01/04/2013 23. 100Honing OilHONEVEL7, 10PROPERIOTORY GRADEPRODUCT DESCRIPTION: HONEVEL grades are inactive type low viscosity honing oils based on mineral oils fortifiedwith specially selected additives to impart good lubricity characteristics and low temperature fluidity for honing andlapping operations of all ferrous and non-ferrous metals with good surface finish. These products have very light colourfor better visibility of work-pieces and tools to the operators, excellent chip flushing, good heat carrying capacity andprovide long service life to the honing stone.APPLICATIONS: HONEVEL grades are recommended for machining operations, like honing, lapping, turning, drilling,tapping etc. of all ferrous and non-ferrous metals and their alloys except Titanium alloys, for super finishing of work-pieces.PERFORMANCE LEVEL: Proprietary GradeProduct Data SheetTypical PropertiesCHARACTERISTICS HONEVEL 7 HONEVEL 10Kinematic Viscosity @40C,cSt 4-6 9-10Flash Point,COC,C, Min. 130 150Copper strip corrosion @ 100C for 3 Hrs, Max. 1 1Pour Point, C, Max. (-)9 (-)9These are typical figures and do not constitute a specification. In pursuit of continuous improvement, these figures may be changed without notice atthe sole discretion of Nandan Petrochem Ltd.Rev.No. 01-01/04/2013 24. Synthetic Grinding FluidSYNTHVEL WSPIS:11186-1985 ( RA 2002 )2, 5, 12PRODUCT DESCRIPTION: SYNTHVEL WSP grades are water based synthetic grinding fluid supplied in concentratedform and are to be diluted with water in suitable ratios before use. These grinding fluids are free from mineral oil, fattymatter and nitrite. These grinding fluids are economical with excellent cooling and anti - rust properties when applied ingrinding and other high speed machining operations of iron and steel with longer service life to grinding wheels and goodsurface finish. The solution maintains the clarity throughout the service period and is not attacked by bacteria. The oilremoves grinding debris quickly and keeps the wheel exceptionally clean.APPLICATION: SYNTHVEL WSP grades are recommended for grinding operations of Iron, Steel, Non-alloyed Steels,Nickel Chromium Steels, High Nickel and Titanium alloys. It must not be used for grinding operations of aluminum, zinc,copper or magnesium alloys, tin or cadmium coated parts. Dilution range for the products varies from 1:40 min.to 1:100 max.PERFORMANCE LEVEL: Meet IS: 11186 -1985 (RA 2002)These are typical figures and do not constitute a specification. In pursuit of continuous improvement, these figures may be changed without notice atthe sole discretion of Nandan Petrochem Ltd.50Product Data SheetTypical PropertiesClear liquid withGreen FluorescenceClear liquid withGreen FluorescenceClear liquid withGreen FluorescenceCHARACTERISTICS SYNTHVELGrades WSP 2 WSP 5 WSP 12Appearance of 10% Volume inDistilled WaterSpecific Gravity at 15.6C 1.200 1.220 1.260pH of 2 % Fluid in Distilled Water, Min 9.0 9.0 9.0Cast iron corrosion test in 50:1Distilled water Passes Passes PassesRev.No. 01-01/04/2013 25. Quenching OilQUENCHVELIS: 2664-1980(RA 2004)22, 32,68PRODUCT DESCRIPTION: QUENCHVEL oils are blended from premium quality solvent refined paraffinic base stockswhich have high flash and fire points, and low volatility characteristics with specially selected additives for heat treatmentof work piece for improved safety and long service life of the products. These products provide proper and controlledcooling with outstanding chemical and oxidation stability.APPLICATION: Different quenching oils with wide range of quenching speeds are used for different types of quenchingoperations to cover the ranges of quenching need on wide variety metallic parts. QUENCHVEL 22, QUENCVEL 32 andQUENCHVEL 68 are straight mineral oil type quenching oils, where as QUENCHVEL 22C, QUENCVEL 32C andQUENCHVEL 68C are compounded type quenching oils.PERFORMANCE LEVEL: Meets IS: 2664 1980 (RA 2004)Product Data SheetTypical PropertiesCHARACTERISTICS QUENCHVELGrades 22/22C 32/32C 68/68CKinematic Viscosity @40C, cSt. 20-24 30-34 64-72Viscosity Index, Min. 90 90 90Flash Point ,COC,C,Min. 190 200 200Pour Point, C, Max. (-)6 (-)6 (-)3These are typical figures and do not constitute a specification. In pursuit of continuous improvement, these figures may be changed without notice atthe sole discretion of Nandan Petrochem Ltd.50Rev.No. 01-01/04/2013 26. Rust Preventive Oil(Solvent Based)RUSTVEL WD SProprietary Grade60, 90, 120PRODUCT DESCRIPTION: RUSTVEL WD S (SOLVENT BASED-WATER DISPLACING TYPE) are light bodied solvent CutBack type, water displacing rust preventive oils. They form very thin, soft and powerful protective film on evaporation ofthe solvent present in the rust preventive oils. RUSTVEL WD S are very good water displacing characteristic andexcellent finger print corrosion prevention property.APPLICATION: RUSTVEL WD S can be applied by dipping, brushing, swabbing or spraying at ambient temperature forthe protection of the iron sheets, metal stacks, ball and roller bearings etc. from corrosion and rust.PERFORMANCE LEVEL: Proprietary Grade.Product Data SheetTypical PropertiesCHARACTERISTICS RUSTVEL WDSGrades 60 90 120Flash Point ,Abel ** /PMCC C,Min. 32** 60 70Copper Strip Corrosion Test @50C for 3 hrs 1 1 1Film Thickness , Micron, in. 3.5 4.5 6.0Water Displacement Properties Passes Passes PassesThese are typical figures and do not constitute a specification. In pursuit of continuous improvement, these figures may be changed without notice atthe sole discretion of Nandan Petrochem Ltd.200Rev.No. 01-01/04/2013 27. PRODUCT DESCRIPTION: RUSTVEL WD M are non-solvent type oily film forming type rust preventive oils with differentviscosities and film thickness. RUSTVEL WD M are blended from selected base stocks and special additives to ensureexcellent protection of metal components against rusting for longer and shorter duration in indoor and outdoorapplications respectively. Because of its non-drying characteristics, the removal of RUSTVEL WD M from the metalcomponents is easier by treating with petroleum solvents, alkaline cleaning or vapour degreasing agents and do notrequire any special precautions during storage, handling and applications as they are free from any solvent.APPLICATION: RUSTVEL WD M can be applied by immersion, brush, swab or spray for protecting metal componentsfrom rusting.PERFORMANCE LEVEL: Proprietary Grade.Product Data SheetTypical PropertiesCHARACTERISTICS RUSTVEL WD MGrades 105 115 125Kinematic Viscosity @40C, cSt. (Typical) 15 24 450Film Thickness , Micron, Min. 2 2 25Flash Point ,COC C,Min. 130 160 230Copper Strip Corrosion Test @100C for 3 hrs 1 1 1Rust Preventive OilRUSTVEL WD MProprietary Grade105, 115, 125(Oil Based)These are typical figures and do not constitute a specification. In pursuit of continuous improvement, these figures may be changed without notice atthe sole discretion of Nandan Petrochem Ltd.200Rev.No. 01-01/04/2013