vectors an introduction. there are two kinds of quantities… scalars are quantities that have...
TRANSCRIPT
VectorsAn Introduction
There are two kinds of quantities…
• Scalars are quantities that have magnitude only, such as– position– speed– time– mass
• Vectors are quantities that have both magnitude and direction, such as– displacement– velocity– acceleration
Notating vectors
• This is how you notate a vector…
• This is how you draw a vector…
R R
R headtail
Direction of Vectors
• Vector direction is the direction of the arrow, given by an angle.
• This vector has an angle that is between 0o and 90o.
Ax
Vector angle ranges
x
y
Quadrant I0 < < 90o
Quadrant II90o < < 180o
Quadrant III180o < < 270o
Quadrant IV
270o < < 360o
Direction of Vectors
• What angle range would this vector have?• What would be the exact angle, and how
would you determine it?
Bx
Between 180o and 270o
or between- 90o and -180o
Magnitude of Vectors
• The best way to determine the magnitude (or size) of a vector is to measure its length.
• The length of the vector is proportional to the magnitude (or size) of the quantity it represents.
Sample Problem• If vector A represents a displacement of three miles to the north,
then what does vector B represent? Vector C?
A
B
C
Equal Vectors
• Equal vectors have the same length and direction, and represent the same quantity (such as force or velocity).
• Draw several equal vectors.
Inverse Vectors
• Inverse vectors have the same length, but opposite direction.
• Draw a set of inverse vectors.
A
-A
The Right Triangle
θ
oppo
site
adjacent
hypotenuse
Pythagorean Theorem
• hypotenuse2 = opposite2 + adjacent2
• c2 = a2 + b2
θ
oppo
site
adjacent
hypotenuse
Basic Trigonometry functions
• sin θ = opposite/hypotenuse• cos θ = adjacent/hypotenuse• tan θ = opposite/adjacent
θ
oppo
site
adjacent
hypotenuseSOHCAHTOA
Inverse functions
• θ = sin-1(opposite/hypotenuse)• θ = cos-1(adjacent/hypotenuse)• θ = tan-1(opposite/adjacent)
θ
oppo
site
adjacent
hypotenuseSOHCAHTOA
Sample problem• A surveyor stands on a riverbank directly across the river from a tree on
the opposite bank. She then walks 100 m downstream, and determines that the angle from her new position to the tree on the opposite bank is 50o. How wide is the river, and how far is she from the tree in her new location?
Sample problem• You are standing at the very top of a tower and notice that in order to see
a manhole cover on the ground 50 meters from the base of the tower, you must look down at an angle 75o below the horizontal. If you are 1.80 m tall, how high is the tower?
Vectors: x-component
• The x-component of a vector is the “shadow” it casts on the x-axis.
• cos θ = adjacent ∕ hypotenuse• cos θ = Ax ∕ A
• Ax = A cos
A
x
Ax
Vectors: y-component
• The y-component of a vector is the “shadow” it casts on the y-axis.
• sin θ = opposite ∕ hypotenuse• sin θ = Ay ∕ A
• Ay = A sin
A
x
y
Ay Ay
Vectors: angle
• The angle a vector makes with the x-axis can be determined by the components.
• It is calculated by the inverse tangent function
• = tan-1 (Ay/Ax)
x
y
Rx
Ry
Vectors: magnitude
• The magnitude of a vector can be determined by the components.
• It is calculated using the Pythagorean Theorem.
• R2 = Rx2 + Ry
2
x
y
Rx
Ry
R
Practice Problem• You are driving up a long inclined road. After 1.5 miles you notice
that signs along the roadside indicate that your elevation has increased by 520 feet.
a) What is the angle of the road above the horizontal?
Practice Problem• You are driving up a long inclined road. After 1.5 miles you notice
that signs along the roadside indicate that your elevation has increased by 520 feet.
b) How far do you have to drive to gain an additional 150 feet of elevation?
Practice Problem
• Find the x- and y-components of the following vectors
a) R = 175 meters @ 95o
Practice Problem
• Find the x- and y-components of the following vectors
b) v = 25 m/s @ -78o
Practice Problem
• Find the x- and y-components of the following vectors
c) a = 2.23 m/s2 @ 150o
Graphical Addition of Vectors
Graphical Addition of Vectors
1) Add vectors A and B graphically by drawing them together in a head to tail arrangement.
2) Draw vector A first, and then draw vector B such that its tail is on the head of vector A.
3) Then draw the sum, or resultant vector, by drawing a vector from the tail of A to the head of B.
4) Measure the magnitude and direction of the resultant vector.
A
B
RA + B = R
Practice Graphical Addition
R is called the resultant vector!
B
The Resultant and the Equilibrant
• The sum of two or more vectors is called the resultant vector.
• The resultant vector can replace the vectors from which it is derived.
• The resultant is completely canceled out by adding it to its inverse, which is called the equilibrant.
A
B
R A + B = R
The Equilibrant Vector
The vector -R is called the equilibrant.If you add R and -R you get a null (or zero) vector.
-R
Graphical Subtraction of Vectors
1) Subtract vectors A and B graphically by adding vector A with the inverse of vector B (-B).
2) First draw vector A, then draw -B such that its tail is on the head of vector A.
3) The difference is the vector drawn from the tail of vector A to the head of -B.
A
B
A - B = C
Practice Graphical Subtraction
-B
C
Practice Problem
• Vector A points in the +x direction and has a magnitude of 75 m. Vector B has a magnitude of 30 m and has a direction of 30o relative to the x axis. Vector C has a magnitude of 50 m and points in a direction of -60o relative to the x axis.
a) Find A + Bb) Find A + B + Cc) Find A – B.
a)
b)
c)
Vector Addition Laboratory
Vector Addition Lab1. Attach spring scales to force board such that they all have different
readings.2. Slip graph paper between scales and board and carefully trace your set up. 3. Record readings of all three spring scales.4. Detach scales from board and remove graph paper.5. On top of your tracing, draw a force diagram by constructing vectors
proportional in length to the scale readings. Point the vectors in the direction of the forces they represent. Connect the tails of the vectors to each other in the center of the drawing.
6. On a separate sheet of graph paper, add the three vectors together graphically. Identify your resultant, if any.
7. Did you get a resultant? Did you expect one?8. You must have a separate set of drawings for each member of your lab
group, so work efficiently
In C
lass
Hom
ewor
k
Vector Addition by Component
Component Addition of Vectors
1) Resolve each vector into its x- and y-components.
Ax = Acos Ay = Asin
Bx = Bcos By = Bsin
Cx = Ccos Cy = Csin etc.
2) Add the x-components (Ax, Bx, etc.) together to get Rx and the y-components (Ay, By, etc.) to get Ry.
Component Addition of Vectors
3) Calculate the magnitude of the resultant with the Pythagorean Theorem (R = Rx
2 + Ry
2).
4) Determine the angle with the equation = tan-1 Ry/Rx.
Practice Problem• In a daily prowl through the neighborhood, a cat makes a displacement
of 120 m due north, followed by a displacement of 72 m due west. Find the magnitude and displacement required if the cat is to return home.