vapour 1000 - esr vapour 1000 user manual 5 starting operation: install the unit on a level surface....

8
Order code: EQLED360 Vapour 1000 User Manual

Upload: others

Post on 16-Mar-2020

9 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: Vapour 1000 - ESR Vapour 1000 User Manual 5 Starting operation: Install the unit on a level surface. The fluid tank of the unit needs to be filled with haze fluid before switching

Order code: EQLED360

Vapour 1000User Manual

Page 2: Vapour 1000 - ESR Vapour 1000 User Manual 5 Starting operation: Install the unit on a level surface. The fluid tank of the unit needs to be filled with haze fluid before switching

www.prolight.co.uk Vapour 1000 User Manual 2

Safety advice

WARNING - FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL CAREFULLY BEFORE YOUR INITIAL START-UP!• Beforeyourinitialstart-up,pleasemakesurethatthereisnodamagecausedduringtransportation.

• Shouldtherebeanydamage,consultyourdealeranddonotusetheequipment.

• Tomaintaintheequipmentingoodworkingconditionandtoensuresafeoperation,itisnecessaryfortheusertofollowthesafetyinstructionsandwarningnoteswritteninthismanual.

• Pleasenotethatdamagescausedbyusermodificationstothisequipmentarenotsubjecttowarranty.

IMPORTANT:The manufacturer will not accept liability for any resulting damages caused by the non-observance of this manual or any unauthorised modification to the equipment.

OPERATING DETERMINATIONSIfthisequipmentisoperatedinanyotherway,thanthosedescribedinthismanual,theproductmaysufferdamageandthewarrantybecomesvoid.Incorrectoperationmayleadtodangere.g:short-circuit,burnsandelectricshocksetc.

Donotendangeryourownsafetyandthesafetyofothers!

Incorrectinstallationorusecancauseseriousdamagetopeopleand/orproperty.

Beforefillingtheunitdisconnectthemains.Neverfillwithhotliquids.

Onlyusehighquality,waterbasedsmokefluidrecommendedbythemanufacturer.Othersmokefluidsmaycausecloggingandvoidtheguarantee.

Alwaysmakesurethereissufficientsmokefluidinthetank.Operatingthissmokemachinewithoutsmokefluidwillcausedamagetothepumpaswellasoverheatingoftheheater.

Operatetheunitonlyafteryouhavefamiliarisedyourselfwithitsfunctions.Donotpermitoperationbypersonsnotqualifiedforoperatingtheunitandalwaysdrainthetankandusetheoriginalpackagingiftheunitistobetransported.

CAUTION! TAKE CARE USING THIS EQUIPMENT!HIGH VOLTAGE-RISK OF ELECTRIC SHOCK!!

• Neverletthepowercablecomeintocontactwithothercables.Handlethepowercableandallmainsvoltageconnectionswithparticularcaution!

• Neverremovewarningorinformativelabelsfromtheunit.

• Donotopentheequipmentanddonotmodifytheunit.

• Donotswitchtheequipmentonandoffinshortintervals,asthiswillreducethesystem’slife.

• Onlyusetheequipmentindoors.

• Donotexposetoflammablesources,liquidsorgases.

• Alwaysdisconnectthepowerfromthemainswhenequipmentisnotinuseorbeforecleaning!Onlyhandlethepower-cablebytheplug.Neverpullouttheplugbypullingthepower-cable.

• Makesurethattheavailablemainssupplyvoltageis240VAC,50Hz.

• Makesurethatthepowercableisnevercrimpedordamaged.Checktheequipmentandthepowercableperiodically.

• Iftheequipmentisdroppedordamaged,disconnectthemainspowersupplyimmediatelyandhaveaqualifiedengineerinspecttheequipmentbeforeoperatingagain.

• Iftheequipmenthasbeenexposedtodrastictemperaturefluctuation(e.g.aftertransportation),donotconnectpowerorswitchitonimmediately.Thearisingcondensationmightdamagetheequipment.Leavetheequipmentswitchedoffuntilithasreachedroomtemperature.

• Ifyourproductfailstofunctioncorrectly,stopuseimmediately.Packtheunitsecurely(preferablyintheoriginalpackingmaterial),andreturnittoyourProLightdealerforservice.

• Onlyusefusesofsametypeandrating.

• Repairs,servicingandpowerconnectionmustonlybecarriedoutbyaqualifiedtechnician.THISUNITCONTAINSNOUSERSERVICEABLEPARTS.

• Thisfixtureisforprofessionaluseonly-itisnotdesignedfororsuitableforhouseholduse.Theproductmustbeinstalledbyaqualifiedtechnicianinaccordancewithlocalterritoryregulations.Thesafetyoftheinstallationistheresponsibilityoftheinstaller.Thefixturepresentsrisksofsevereinjuryordeathduetofirehazards,electricshockandfalls.

• Warning!RiskGroup2LEDproductaccordingtoEN62471.Donotviewthelightoutputwithopticalinstrumentsoranydevicethatmayconcentratethebeam.

• WARRANTY:Oneyearfromdateofpurchase.

Page 3: Vapour 1000 - ESR Vapour 1000 User Manual 5 Starting operation: Install the unit on a level surface. The fluid tank of the unit needs to be filled with haze fluid before switching

www.prolight.co.uk Vapour 1000 User Manual 3

Product overview & technical specifications

TheVapour1000hazeriscapableofproducingaroomhanginghazeinamatterofmoments.Thehazewillemphasisetheeffectsthatlightingfixturesandspotlightscreate.Thehazethatthismachineproducesmakesitpossibletoeasilyseethebeamsoflightfromyourfixtures.Thehazerfeaturesafanandadjustablehazedirectioncontrolsoitdoesn’tblowonebigplumeofsmokeontothestage.ThehazercanalsobeDMXcontrolledandcomessuppliedwithanon-boardcontrolpanel.

•800W(max.)heater

•Smokeoutput:approx.30,000cu.ftperminute

•Warm-uptime:approx.2min

•Tankcapacity:1.2litres

•4pushbuttonmenuwithLEDdisplay

•3-PinXLRinput/output

•IECpowerinput

Vapour 1000

260mm

210mm 485mm

DMX INPUT

POWER INPUT: 240V~50Hz

FUSE: F4A 250V

OFF

MENU DOWN UP ENTER

ON

DMX OUTPUT POWER CONSUMPTION: 800W (max.)

www.prolight.co.uk

03 02 0106 0708

10

09

0504

01-LEDdisplay

02-Functionbuttons

03-Poweron/offswitch

04-DMXinput

05-DMXoutput

06-IECpowerinput

07-FuseF4A250V

08-Hazeapeture

09-Fluidtank

10-Carryhandle

Inthebox:1 x fixture, 1 x power cable & 1 x user manual

Specifications

Powerconsumption 800W(max.)

Powersupply 240V,50Hz

Fuse F4A250V

Dimensions 260x210x485mm

Weight 5.8kg

Ordercode EQLED360

Page 4: Vapour 1000 - ESR Vapour 1000 User Manual 5 Starting operation: Install the unit on a level surface. The fluid tank of the unit needs to be filled with haze fluid before switching

www.prolight.co.uk Vapour 1000 User Manual 4

OnstartuptheLEDdisplayontherearoftheunitwillshowUpwhilsttheunititheatingup.

DMX mode:

OperatinginaDMXcontrolmodeenvironmentgivestheuserthegreatestflexibilitywhenitcomestocustomisingorcreatingashow.Inthismodeyouwillbeabletocontroleachindividualtraitofthefixtureandeachfixtureindependently.

ToaccesstheDMXaddressmode,pressthe“MENU”buttonontherearoftheunittoshowAddrontheLEDdisplay.Nowpressthe“ENTER”buttonandusethe“UP”and“DOWN”buttonstosettherequiredDMXaddress.Pressthe“ENTER”buttontoconfirmthesetting.

Manual control mode:

ToaccesstheManualcontrolmode,pressthe“MENU”buttonontherearoftheunittoshowoutontheLEDdisplay.Nowpressthe“ENTER”buttonandusethe“UP”and“DOWN”buttonstochoosethedesiredhazeamountbetweenF001~F100.Pressthe“ENTER”buttontoconfirmthesetting.

Tosuspendthehazeoutputpressandholdthe“ENTER”buttontoshowread.Toresumethehazeoutputpressandholdthe“ENTER”buttonagain.Thedisplaywillnowshowthelastselectedvalue.

Toexitoutofanyoftheaboveoptions,pressthe“MENU”button.

Value: 001 - 100 (001 = no haze output, 100 = maximum haze output)

Master/slave mode:

Tosettheunitinmaster/slave,pressthe“MENU”buttononthefrontoftheunittoshowSLndontheLEDdisplay.Nowpressthe“ENTER”buttonandusethe“UP”and“DOWN”buttonstoselectbetweenNASt~SLAu.Pressthe“ENTER”buttontoconfirmthesetting.Toexitoutofanyoftheaboveoptions,pressthe“MENU”button.

Operating instructionsOperating instructions

MENU

DMX address setting0 0 1

5 1 2A d d r

Master/slave modeN A s t

S L A vS L n d

1 channel mode:

Channel Value Function

CH1 000-255 Hazeoutput(0-100%)

Manual control moder e a dF 0 0 1

F 1 0 0o u t

Page 5: Vapour 1000 - ESR Vapour 1000 User Manual 5 Starting operation: Install the unit on a level surface. The fluid tank of the unit needs to be filled with haze fluid before switching

www.prolight.co.uk Vapour 1000 User Manual 5

Starting operation:

Installtheunitonalevelsurface.

Thefluidtankoftheunitneedstobefilledwithhazefluidbeforeswitchingon.Alwaysdisconnecteditfromthemainssupplybeforefillingasfluidcouldbespilled.

Onlyusequalityhazefluidsrecommendedbyyourdealer.Youmustnotusesubstanceswhichareclassifiedas‘DANGEROUS WORKING MATERIALS’ or ‘FLAMMABLE FLUIDS’.

Iffluidshouldgetinsidethemainhousing,disconnecttheunitfromthemainsimmediatelyandconsultatechnician.

Installation:

Installtheunitinawell-ventilatedarea.Useinaninsufficientlyventilatedroomcanleadtothecondensationofthehazefluid.Theresultingslipperysurfacecancauseaccidents.Keepaminimumdistanceof1maroundtheunit.

Furthermoredonotorientatetheoutputnozzledirectlyinthedirectionoftheaudience’seyes.Inordertocreatethebesteffect,thereshouldbeadistancebetweentheunitandtheaudienceofatleast1.5m.

Onlyinstallthehazemachineonfireresistant,scratchresistantandwaterresistantsurfaces.

Operating instructionsOperating instructions

DANGER OF FIRE!When installing the unit, make sure there is no highly flammable

material (decoration articles etc) within a minimum distance of 1m

DANGER TO LIFE!Disconnect from the mains before starting maintenance

Page 6: Vapour 1000 - ESR Vapour 1000 User Manual 5 Starting operation: Install the unit on a level surface. The fluid tank of the unit needs to be filled with haze fluid before switching

www.prolight.co.uk Vapour 1000 User Manual 6

Operating instructions

Cleaning and maintenance:

Werecommendafrequentcleaningoftheunit.Pleaseuseasoftlint-freeandmoistenedcloth.Neverusealcoholorsolvents!Cleantheoutputnozzlefrequentlyfromhazefluidresidues.Thefluidswerecommendarenon-hazardoustotheenvironmentandcanbedisposedofviathesewagesystem.

Therearenoserviceablepartsinsidethisunitexceptforthefuse.Maintenanceandserviceoperationsareonlytobecarriedoutbyauthorizeddealers.

Replacing the fuse:

Onlyreplacethefusewithafuseofsametypeandrating.

Beforereplacingthefuse,disconnectfromthemains,seethefollowingforprocedure:

Step 1: Open the fuse holder on the rear panel with a suitable screwdriver. Step 2: Remove the old fuse from the fuse holder. Step 3: Install the new fuse in the fuse holder.(Replacementfusesshouldbeofthesamevalueasoriginallysupplied)Step 4: Replace the fuse holder in the housing.

Shouldyouneedanyspareparts,onlyusegenuineparts.

Ifdefective,pleasedisposeoftheunusableunitinaccordancewiththecurrentlegalregulations.

Shouldyouhaveanyfurtherquestions,pleasecontactyourdealer.

Page 7: Vapour 1000 - ESR Vapour 1000 User Manual 5 Starting operation: Install the unit on a level surface. The fluid tank of the unit needs to be filled with haze fluid before switching

www.prolight.co.uk Vapour 1000 User Manual 7

WEEE notice

Correct Disposal of this Product (Waste Electrical & Electronic Equipment)

(Applicable in the European Union and other European countries with separate collection systems)

Thismarkingshownontheproductoritsliterature,indicatesthatitshouldnotbedisposedofwithotherhouseholdwastesattheendofitsworkinglife.Topreventpossibleharmtotheenvironmentorhumanhealthfromuncontrolledwastedisposal,pleaseseparatethisfromothertypesofwastesandrecycleitresponsiblytopromotethesustainablereuseofmaterialresources.

Householdusersshouldcontacteithertheretailerwheretheypurchasedthisproduct,ortheirlocalgovernmentoffice,fordetailsofwhereandhowtheycantakethisitemforenvironmentallysaferecycling.

Businessusersshouldcontacttheirsupplierandcheckthetermsandconditionsofthepurchasecontract.Thisproductshouldnotbemixedwithothercommercialwastesfordisposal.

Page 8: Vapour 1000 - ESR Vapour 1000 User Manual 5 Starting operation: Install the unit on a level surface. The fluid tank of the unit needs to be filled with haze fluid before switching

www.prolight.co.uk Vapour 1000 User Manual 8