SV SerieS ValVeS

TWO-WAY, SERVO-PILOTED THROTTLING

VALVES DESIGNED FOR THE MOST

RIGOROUS DIE CASTING NEEDS

8400 Sweet Valley Dr. , Ste. 406Valley View, OH 44125

Call : 800.252.8725Fax : 216.524.9594

The SV Series servo throttling valves were developed by Visi-Trak and Olmsted Products Co. for the highly dynamic needs of modern shot control - precise control, explosive acceleration, and extreme

responsiveness. Upgrade virtually any shot-end.

VALVE REPLACEMENT PACKAGES FoR DiE-CASTiNG CoNTRoL

www.Visi-Trak.comwww.Visi-Trak.com

VALVES FOR DIE-CASTING

Precise Slow-shot Speed •Control for reduced porosity.

High Flow Rates• for explosive acceleration & deceleration.

Fastest Response Time• for the most dynamic shot profiles.

Easy To implement • in a variety of styles and sizes.

Rugged Design• for exceptionally long life

1 Excellent low speed control during cavity filling phase

2 Smooth acceleration transitions for low porosity

3 Explosive acceleration on demand

4 Quick deceleration to dampen impact

DyNAmICALLy ADjuSTAbLE ShOT CONTROL SySTEm o p t i m i z e y o u r i n j e c t i o n p r o f i l e

34

1 23

4

REDUCE POROSITY, FLASH, AND SCRAP

Every detail supports the highly dynamic needs of modern shot control.

Precise control for the slow phase, explosive acceleration for the fill, and

extremely responsive deceleration for low impact.

SV SERiES VALVES FoR DiE-CASTiNG

8400 Sweet Valley Dr. , Ste. 406Valley View, OH 44125

Call : 800.252.8725Fax : 216.524.9594

www.Visi-Trak.comwww.Visi-Trak.com

Why ChOOSE A SV SERIES VALVE?

DyNAMiCALLy RESPoNSiVE ToUGH + RELiABLE EASy To iMPLEMENT

unique design enables fine low speed control and very high flow rates, allowing precise control over a broad speed range.

All working valve surfaces utilize hardened & ground 8620 carburizing steel, for exceptionally long life.

Available in a cast body for in-line installations (50mm and 80mm sizes).

the fastest response time of any servo piloted throttling valve tested - instant response for even the most dynamic shot profiles.

in-line version is fully sleeved, allowing replacement of any worn components, for amazing valve life.

Available in cartridge style for manifold mounting for clean hydraulic designs (32 mm, 40 mm, 50 mm, 63 mm, 80 mm, and 100 mm sizes).

Pressure rated up to 6000 PSI Improved LVDT design eliminates leakage

Prince 1600-ton Upgrade Client: The Toro Company, Windom, MN Start: Tuesday Morning DeliveryFinish: Thursday Afternoon

OEE increased by 15.5%•Scrap rate reduced by 28.5%•Significant flash reduction using low impact•60% less than the cost of new a shotend•

“The new Visi-Trak valve increased our top speed by over 100”/sec. and allowed us to continue creating cost-effective castings

even after we outgrew the machine’s original capabilities.”

8400 Sweet Valley Dr. , Ste. 406Valley View, OH 44125

Call : 800.252.8725Fax : 216.524.9594

www.Visi-Trak.comwww.Visi-Trak.com

Olmsted sV363-03 50mm In-lIne ValVe In a Cast BOdy

8400 Sweet Valley Dr. , Ste. 406Valley View, OH 44125

Call : 800.252.8725Fax : 216.524.9594

www.Visi-Trak.comwww.Visi-Trak.com

Olmsted sV370 50mm CartrIdge ValVe

8400 Sweet Valley Dr. , Ste. 406Valley View, OH 44125

Call : 800.252.8725Fax : 216.524.9594

www.Visi-Trak.comwww.Visi-Trak.com

Olmsted sV373 100mm CartrIdge ValVe In manIfOld BlOCk

Olmsted sV363-03 50 mm In-lIne Cast BOdy ValVe

Olmsted sV378-01 80 mm In-lIne Cast BOdy ValVe

Olmsted sV370 50 mm CartrIdge ValVe

Olmsted sV372-01 80 mm CartrIdge ValVe

Olmsted sV373-01 100 mm CartrIdge ValVe

Olmsted 5-way ChangeOVer layOUt - hydraUlIC CIrCUIt

Olmsted CartrIdge ValVes mOUntIng Pattern sCan-209

Olmsted 5 way ValVe hB5V242g17