Version 9 to X Function Map

(Updated September 2010)

Mastercam Version 9 Mastercam XAnalyze-Angle Analyze, AngleAnalyze-Between points Analyze, DistanceAnalyze-Chain Analyze, ChainAnalyze-Contour Analyze, ContourAnalyze-Dynamic Analyze, DynamicAnalyze-Number Analyze, Number/Database, NumberAnalyze-Only Analyze with Masking from General selection ribbon barAnalyze-Point Analyze, PositionAnalyze-Area/volume Analyze, Volume/Area, 2D Area

Analyze, Volume/Area, Surface AreaAnalyze, Volume/Area, Solid properties

Analyze

1

Mastercam Version 9 Mastercam XAnalyze-Surfaces-Base Surfs Analyze, Test Surfaces and Solids, Test SurfacesAnalyze-Surfaces-Check Model Analyze, Test Surfaces and Solids, Check SolidAnalyze-Surfaces-Check Solid Analyze, Test Surfaces and Solids, Check SolidAnalyze-Surfaces-Curvature Analyze, DynamicAnalyze-Surfaces-Set Normals Edit, Set normal

Edit, Change normalAnalyze-Surfaces-Small Surfs Analyze-Surfaces-Test Normals

Analyze, Test Surfaces and Solids, Test SurfacesAnalyze, Test Surfaces and Solids, Test Surfaces

2

Analyze Surfaces

Mastercam Version 9 Mastercam XAttributes Status bar, Attributes

Mastercam Version 9 Mastercam XAutoCursor (Toggle) AutoCursor settings dialog box, or hold [Ctrl] when picking an

AutoCursor position Automatic Centerlines Screen, Configure, CAD Settings, Centerlines (arcs)

Settings, Configuration, CAD settings

3

Attributes, AutoCursor, Automatic Centerlines

Mastercam Version 9 Mastercam XCplane Status Bar, PlanesCplane 3D Status Bar, Replaced with 2D / 3D modeCplane-Back Status Bar, Planes, Back (WCS)Cplane-Bottom Status Bar, Planes, Bottom (WCS)Cplane-DZ(-) Status Bar, Planes, Lathe DiameterCplane-DZ(+) Status Bar, Planes, Lathe DiameterCplane-Entity Status Bar, Planes, Planes by geometryCplane-Equals Gview Status Bar, Planes, Planes = GviewCplane-Equals Tplane Status Bar, PlanesCplane-Front Status Bar, Planes, Top (WCS)Cplane-Last Status Bar, Planes, Last planesCplane-Left Status Bar, Planes, Left (WCS)Cplane-Mouse RemovedCplane-Named Status Bar, Planes, Named ViewsCplane-Normal Status Bar, Planes, Planes by normalCplane-Number RemovedCplane-Origin Status Bar, PlanesCplane-Rotate Status Bar, Planes, Rotate planesCplane-Side Status Bar, PlanesCplane-Top Status Bar, Planes, Top (WCS)Cplane-XZ(-) Status Bar, Planes, Lathe radiusCplane-XZ(+) Status Bar, Planes, Lathe radius

4

Cplanes

Mastercam Version 9 Mastercam XCreate-Arc-3 points Create, Arc, Arc 3 pointsCreate-Arc-Endpoints Create, Arc, Arc EndpointsCreate-Arc-Polar-Center Point Create, Arc, Arc PolarCreate-Arc-Polar-End Point Create, Arc, Arc Polar EndpointsCreate-Arc-Polar-Sketch Create, Arc, Arc PolarCreate-Arc-Polar-Start Point Create, Arc, Arc Polar EndpointsCreate-Arc-Tangent-1 Entity Create, Arc, Arc TangentCreate-Arc-Tangent-2 Entities Create, Arc, Circle Edge Point / Arc TangentCreate-Arc-Tangent-3 Entities Create, Arc, Circle Edge Point / Arc TangentCreate-Arc-Tangent-Center Line Create, Arc, Arc TangentCreate-Arc-Tangent-Dynamic Create, Arc, Arc TangentCreate-Arc-Tangent-Point Create, Arc, Arc TangentCreate-Bounding Box Create, Bounding BoxCreate-Chamfer Create, Chamfer, Entities and Create, Chamfer, ChainsCreate-Circle-2 Points Create, Arc, Circle Edge PointCreate-Circle-3 Points Create, Arc, Circle Edge PointCreate-Circle-Point/Diameter Create, Arc, Circle Center PointCreate-Circle-Point/Edge Create, Arc, Circle Center PointCreate-Circle-Point/Radius Create, Arc, Circle Center Point

5

Create Arc, Create Bounding Box, Create Chamfer, Create Circle

Mastercam Version 9 Mastercam XCreate-Curve-All Edges Create, Curve, Curve on All EdgesCreate-Curve-Const Parameter Create, Curve, Constant Parameter CurveCreate-Curve-Dynamic Create, Curve, Dynamic CurveCreate-Curve-Flowline Create, Curve, Flowline CurveCreate-Curve-Intersect Create, Curve, Curve at IntersectionCreate-Curve-One Edge Create, Curve, Curve on One EdgeCreate-Curve-Parting Line Create, Curve, Part Line CurveCreate-Curve-Patch Boundaries Removed - Use Curve on All EdgesCreate-Curve-Project Removed - Use Xform ProjectCreate-Curve-Slice Create, Curve, Curve Slice

6

Create Curve

Mastercam Version 9 Mastercam XCreate-Dimension-Angular Create, Drafting, Dimension, AngularCreate-Dimension-Baseline Create, Drafting, Dimension, BaselineCreate-Dimension-Chained Create, Drafting, Dimension, ChainedCreate-Dimension-Circular Create, Drafting, Dimension, CircularCreate-Dimension-Horizontal Create, Drafting, Dimension, HorizontalCreate-Dimension-Ordinate Create, Drafting, Dimension, OrdinateCreate-Dimension-Parallel Create, Drafting, Dimension, ParallelCreate-Dimension-Point Create, Drafting, Dimension, PointCreate-Dimension-Vertical Create, Drafting, Dimension, VerticalCreate-Drafting-Hatch Create, Drafting, X-HatchCreate-Drafting-Label Create, Drafting, NoteCreate-Drafting-Leader Create, Drafting, LeaderCreate-Drafting-Multi edit Create, Drafting, Multi-editCreate-Drafting-Note Create, Drafting, NoteCreate-Drafting-Witness Line Create, Drafting, Witness LineCreate, Next Menu-Ellipse Create, Ellipse

7

Create Dimension/Drafting, Create Ellipse

Mastercam Version 9 Mastercam XCreate-Fillet-2 Entities Create, Fillet, EntitiesCreate-Fillet-Chain Create, Fillet ChainsCreate, Next Menu-Letters Create, Letters

8

Create Fillet, Create Letters

Mastercam Version 9 Mastercam XCreate-Line-Bisect Create, Line, BisectCreate-Line-Closest Create, Line, ClosestCreate-Line-Endpoints Create, Line, EndpointCreate-Line-Horizontal Create, Line, EndpointCreate-Line-Multi Create, Line, EndpointCreate-Line-Parallel-Arc Create, Line, ParallelCreate-Line-Parallel-Dist/Side Create, Line, ParallelCreate-Line-Parallel-Point Create, Line, ParallelCreate-Line-Perpendicular Create, Line, PerpendicularCreate-Line-Perpendicular-Arc Create, Line, PerpendicularCreate-Line-Perpendicular-Pt Create, Line, PerpendicularCreate-Line-Polar Create, Line, EndpointCreate-Line-Tangent Create, Line, EndpointCreate-Line-Tangent-2 Arcs Create, Line, EndpointCreate-Line-Tangent-Angle Create, Line, EndpointCreate-Line-Tangent-Point Create, Line, Tangent through pointCreate-Line-Vertical Create, Line, Endpoint

Mastercam Version 9 Mastercam XCreate, Next Menu-Pattern File, File Merge/Pattern

9

Create Line

Mastercam Version 9 Mastercam XCreate-Point-Along Entity Create, Point, SegmentCreate-Point-Bolt Circle Create, Create-Point-Cpts NURBS Create, Point, Node PointsCreate-Point-Dynamic Create, Point, DynamicCreate-Point-Grid Removed - Use Xform ArrayCreate-Point-Length Create, Point, SegmentCreate-Point-Node Points Create, Point, Node PointsCreate-Point-Perpendicular Create, Point, DynamicCreate-Point-Position Create, Point, PositionCreate-Point-Slice Removed - Use Curve SliceCreate-Point-Small Circles Create, Point, Small ArcsCreate-Point-Surface Project Xform, ProjectCreate-Polygon Create, Polygon

10

Create Point, Create Polygon

Mastercam Version 9 Mastercam XCreate-Rectangle Create, RectangleCreate-Rectangle-1 Point Create, Rectangular ShapesCreate-Rectangle-2 Points Create, Rectangular ShapesCreate-Spiral/Helix Create, Spiral and Create, HelixCreate-Surface-2 Surface Blend Create, Surface, 2-Surface BlendCreate-Surface-3 Surface Blend Create, Surface, 3-Surface BlendCreate-Surface-Coons Removed - Create, Surface, Net

Surface

Note: The C-Hook CoonsSurf.dll can be used to create V9 style coons surfaces.

11

Create Rectangle, Create Surface

Mastercam Version 9 Mastercam XCreate-Surface-Draft Create, Surface, DraftCreate-Surface-Fillet Blend Create, Surface, 3-Fillet Blend Create-Surface-Fillet Create, Surface, Fillet To Curves;

Create, Surface, Fillet, To Surfaces;Create, Surface, Fillet, To Plane;

Create-Surface-From Solid Create, Surface, From SolidCreate-Surface-Loft Create, Surface, Ruled/Lofted Create-Surface-Offset Create, Surface, OffsetCreate-Surface-Primitive Create, Primitives (same command for surface or solid primitives)Create-Surface-Revolved Create, Surface, Revolved Create-Surface-Ruled Create, Surface, Ruled/Lofted Create-Surface-Swept Create, Surface, SweptCreate-Surface-Trim Create, Surface, Trim SurfaceCursor Tracking (Toggle) Removed - Cursor tracking is always on when AutoCursor is active.

12

Create Surface

Mastercam Version 9 Mastercam XDelete Edit, Delete, Delete entitiesDelete-All Edit, Delete, Delete entities, then use the All mask in General SelectionDelete-Chain Delete, Chain in General SelectionDelete-Duplicate Delete Duplicates and Delete Duplicates Advanced

Delete-Group Edit, Delete, Delete entities, then use the All mask in General SelectionDelete-Only Edit, Delete, Delete entities, then use the Only mask in General Selection.Delete-Result Edit, Delete, Delete entities, then use the All mask in General SelectionDelete-Undelete Edit, Delete, Undelete EntityDelete-Undelete-Single Edit, Delete, Undelete EntityDelete-Window General Select w/ Delete

13

Delete

Mastercam Version 9 Mastercam XDraft-Globals Create, Drafting, OptionsDraft-Regenerate-All Create, Drafting, Regen, AllDraft-Regenerate-Auto (Toggle)

Create, Drafting, Regen, Automatic

Draft-Regenerate-Selected Create, Drafting, Regen, SelectDraft-Regenerate-Validate Create, Drafting, Regen, Validate

Mastercam Version 9 Mastercam XEntity Attributes (Apply) Status Bar, AttributesEntity Attributes Manager Status Bar, Attributes, EA Manager buttonExecute C-Hook Settings, Run User Application or [Alt+C]

14

Draft Attributes

Mastercam Version 9 Mastercam XFile-AutoSave Settings, Configuration, Expand Files, AutoSave /

Backup pageFile-Browse RemovedFile-Communications Toolpath Manager, Post selected operations,

select Send to Machine, Communications button. File-Convert File, OpenFile-Convert-ASCII File, OpenFile-Convert-AutoDesk File, OpenFile-Convert-CADL File, OpenFile-Convert-DXF (pre-V9) File, OpenFile-Convert-IGES File, OpenFile-Convert-VDA File, OpenFile-DOS Shell RemovedFile-Edit File, Edit/Open ExternalFile-Get File, OpenFile-Hardcopy File, PrintFile-Merge Edit, PasteFile-New File, NewFile-RAMsaver Settings, Ram saver, Wireframe and Shaded

options on toolbar.Screen, Shade Settings

File-Renumber Toolpath Manager right-click menu, Edit selected operations, Renumber tools.

15

File

Mastercam Version 9 Mastercam X

Fulltime Shading (Toggle)

16

Screen Surface Display

17

Mastercam Version 9 Mastercam XGroups Status Bar, GroupsGview Status Bar, GviewGview-Back Status Bar, Gview, Back GviewGview-Bottom Status Bar, Gview, Bottom GviewGview-Dynamic Pan Status Bar, GviewGview-Dynamic Zoom Status Bar, GviewGview-Dynamic Status Bar, GviewGview-Entity Status Bar, GviewGview-Equals Cplane Status Bar, Gview, Gview = CplaneGview-Equals Tplane Status Bar, Gview, Gview = TplaneGview-Front Status Bar, Gview, Front GviewGview-Isometric Status Bar, Gview, Isometric GviewGview-Last Status Bar, Gview, Previous ViewGview-Left Status Bar, Gview, Left GviewGview-Mouse Status bar, GviewGview-Named Status Bar, Gview, Named ViewsGview-Normal Status Bar, Gview, ViewGview-Number RemovedGview-Rotate Status Bar, GviewGview-Side Status Bar, GviewGview-Top Status Bar, Gview, Top Gview

Groups, Gview

18

Mastercam Version 9 Mastercam XHelp Help, Contents

Mastercam Version 9 Mastercam XHide Screen, Hide EntityHide-Unhide Some Screen, Unhide SomeHide-Hide More Screen, Hide More

Help, Hide

19

Mastercam Version 9 Mastercam XLevel-Level Manager Status Bar, LevelLevels-Main Status Bar, LevelLevels-Mask Status Bar, Level ManagerLevels-Report Status Bar, Level ManagerLevels-Visible Status Bar, Level ManagerList Files RemovedList Memory Removed

Mastercam Version 9 Mastercam XMacro-Pause (Toggle) Settings, Macro ManagerMacro-Playback (Toggle) Settings, Macro ManagerMacro-Record (Toggle) Settings, Macro ManagerMain Color Status BarMenu Font Removed

Levels, List, Macro, Main Color, Menu Font

20

Mastercam Version 9 Mastercam XModify-Break-2 Pieces Edit, Trim / Break, Break Two PiecesModify-Break-Arcs Edit, Trim / Break, Break CirclesModify-Break-At Length Edit, Trim / Break, Trim / Break / ExtendModify-Break-Cdata/Line RemovedModify-Break-Draft/Line Edit, Trim / Break, Break Drafting into LinesModify-Break-Hatch/Line Edit, Trim / Break, Break Drafting into LinesModify-Break-Many Pieces and Modify Break-Splto Arcs

Edit, Trim / Break, Break Many Pieces

Modify-Convert to Arcs Edit, SimplifyModify-Cpts NBS Edit, Modify SplineModify-Drag Xform, Xform DragModify-Drag-Note Moved to Xform, DragModify-Extend Edit, Trim / Break / ExtendModify-Join Edit, Join entitiesModify-Normal Edit, Change and Edit, Set

Modify

21

Mastercam Version 9 Mastercam XModify-Surface-Extend Create, Surface, ExtendModify-Surface-Remove Bndy Create, Surface, Remove BoundaryModify-Surface-Split Create, Surface, SplitModify-Surface-Trim-Flat Bndy Create, Surface, Flat BoundaryModify-Surface-Trim-To Curves Create, Surface, Trim, To CurvesModify-Surface-Trim-To Plane Create, Surface, Tri, Trim To PlaneModify-Surface-Trim-To Surfs Create, Surface, Trim, To SurfacesModify-Surface-Untrim Create, Surface, Un-trimModify-Trim-1 Entity Edit, Trim / Break, Trim / Break / ExtendModify-Trim-2 Entities Edit, Trim / Break, Trim / Break / ExtendModify-Trim-3 Entities Edit, Trim / Break, Trim / Break / ExtendModify-Trim-Close Arc Edit, Trim / Break, Close arcModify-Trim-Divide Edit, Trim / Break, Trim / Break / ExtendModify-Trim-Many Edit, Trim / Break, Trim ManyModify-Trim-To Point Edit, Trim / Break, Trim / Break / ExtendModify-X to NURBS Edit, Convert NURBS

Modify

22

Mastercam Version 9 Mastercam XNC Utils-Backplot Toolpath Manager

NC Utils-Post Toolpath Manager, Post Selected OperationsNC Utils-Post-Change Settings, Control Definition Manager assigns the post to the control.

Settings, Machine Definition Manager- changes the active post.NC Utils-Post-Reverse RemovedNC Utils-Define Tools Toolpaths, Tool ManagerNC Utils-Filter RemovedNC Utils-Post-Run RemovedNC Utils-Setup Sheet Toolpath Manager, right-click, Setup sheetNC Utils-Verify Toolpath Manager, Verify

Prompt Visible (Toggle) Removed

NC Utils, Prompt

23

Mastercam Version 9 Mastercam XScreen - Clear colors Screen, Clear ColorsScreen-Blank, Screen-Unblank Screen, BlankScreen-Center View, Zoom targetScreen-Change Attributes Analyze, Entity Properties, or right-click in the Status BarScreen-Change Colors Analyze, Entity PropertiesScreen-Change Levels Analyze, Entity PropertiesScreen-Combine Views Screen, Combine ViewsScreen-Configure Settings, ConfigurationScreen-Display info Settings, Customize, Screen category, Display

screen info icon only Screen-Draw axes Settings, Customize, Screen category, Display

WCS T/C planes axes icon only Screen-Draw Toolpath RemovedScreen-Endpoints Create, Point, EndpointsScreen-Fit View, FitScreen-Grid Screen, GridScreen-Plot File, PrintScreen-Regenerate Screen, RegenerateScreen-Repaint Screen, RepaintScreen-Statistics Screen, StatisticsScreen-Surf Disp Screen, Shading settingsScreen-Surf Disp-Shading Screen, Shading settings

Screen

24

Mastercam Version 9 Mastercam XScreen-Surf Disp-Studio Screen, Shading Settings Screen-To Clipboard Settings, Customize, Screen category,

Copy screen image to clipboard- icon onlyScreen-Unzoom by 0.8 View, Unzoom .8Screen-Unzoom View, Un-zoom Previous / .5; View, Un-zoom .8Screen-Zoom View, Zoom Window, Zoom TargetScreen-Viewports View, Viewports

Screen

25

Mastercam Version 9 Mastercam XSolids-Boolean Solid, Boolean Add

Solid, Boolean RemoveSolid, Boolean Common

Solids-Chamfer Solid, ChamferSolids-Draft face Solid, Draft FacesSolids-Extrude Solid, ExtrudeSolids-Fillet Solid, FilletSolids-Find features Solid, Find FeaturesSolids-Layout Solid, LayoutSolids-Loft Solid, LoftSolids-Remove faces Solid, Remove FacesSolids-Revolve Solid, RevolveSolids-Shell Solid, ShellSolids-Sweep Solid, SweepSolids-Thicken Solid, ThickenSolids-Trim Solid, TrimSolids-Primitive Create, PrimitivesToolbar Visible (Toggle) Settings, Customize, Toolbars tab

Solids, Toolbar

26

Mastercam Version 9 Mastercam XToolpaths-Operations Manager Main InterfaceToolpaths-Job Setup Toolpath Manager, Machine Group PropertiesToolpaths-New Toolpath Manager, Delete allToolpaths-Circle tlpths Toolpaths, Circle PathsToolpaths-Contour Toolpaths, Contour Toolpaths-Curve 5 Axis Toolpaths, MultiaxisToolpaths-Drill 5 Axis Toolpaths, MultiaxisToolpaths-Drill Toolpaths, DrillToolpaths-Flow 5 Axis Toolpaths, MultiaxisToolpaths-Import NCI Toolpaths, Import NCIToolpaths-Manual Entry Toolpaths, Manual EntryToolpaths-Pocket Toolpaths, PocketToolpaths-Point Toolpaths, PointToolpaths-Project ToolpathsToolpaths-Surface Toolpaths, Surface Rough;

Toolpaths, Surface FinishToolpaths-Rotary 4 Axis Toolpaths, MultiaxisToolpaths-Solid Drill Toolpaths, DrillToolpaths-Swarf 5 Axis Toolpaths, MultiaxisToolpaths-Transform Toolpaths, TransformToolpaths-Trim Toolpaths, TrimToolpaths-Wireframe Toolpaths, Wireframe

Toolpaths

27

Mastercam Version 9 Mastercam XToolpaths-Canned Toolpaths, CannedToolpaths-C-axis Toolpaths, C-axis Toolpaths-Cutoff Toolpaths, CutoffToolpaths-Drill Toolpaths, DrillToolpaths-Face Toolpaths, FaceToolpaths-Finish Toolpaths, FinishToolpaths-Groove Toolpaths, GrooveToolpaths-Manual Ent Toolpaths, Manual EntryToolpaths-Mill Toolpaths, MillToolpaths-Misc. Ops Toolpaths, Misc OpsToolpaths-Point Toolpaths, PointToolpaths-Quick Toolpaths, QuickToolpaths-Rough Toolpaths, RoughToolpaths-Thread Toolpaths, ThreadToolpaths-Transform Toolpaths, Transform

Toolpaths

28

Mastercam Version 9 Mastercam XToolpaths-Block Drill Toolpaths, Block DrillingToolpaths-Circ tlpths Toolpaths, Circle PathsToolpaths-Contour Toolpaths, ContourToolpaths-Drill Toolpaths, DrillToolpaths-Engraving Toolpaths, EngravingToolpaths-Face Toolpaths, FaceToolpaths-Import NCI Toolpaths, Import NCIToolpaths-Manual ent Toolpaths, Manual EntryToolpaths-Multiaxis Toolpaths, MultiaxisToolpaths-Point Toolpaths, PointToolpaths-Pocket Toolpaths, PocketToolpaths-Project ToolpathsToolpaths-Surface Toolpaths, Surface Rough

Toolpaths, Surface FinishToolpaths-Transform Toolpaths, TransformToolpaths-Trim Toolpaths, TrimToolpaths-Wireframe Toolpaths, Wireframe

Toolpaths

29

Mastercam Version 9 Mastercam XTplane Status Bar, Planes Tplane -Entity Status Bar, Planes, Planes by geometryTplane -Equals Gview Status Bar, Planes, Planes GviewTplane -Equals Cplane Status Bar, PlanesTplane -Front Status Bar, Planes, Front (WCS)Tplane -Last Status Bar, Planes, Last planesTplane -Named Status Bar, Planes, Named ViewsTplane - Status Bar, Planes, Planes by normalTplane-Number RemovedTplane-Off RemovedTplane -Rotate Status Bar, Planes, Rotate planesTplane-Side Status Bar, PlanesTplane-Top Status Bar, Planes, Top (WCS)

Tplane

30

Mastercam Version 9 Mastercam X

Translucent Shading (Toggle)Screen, Shade Settings

Undo Edit, Undo

Version (Alt + V) Help, About XWCS / View Manager Status Bar, WCS, View ManagerXform-Mirror Xform, MirrorXform-Offset Contour Xform, Offset ContourXform-Offset Xform, OffsetXform-Roll Xform, RollXform-Rotate Xform, RotateXform-Scale Xform, ScaleXform-Squash Xform, ProjectXform-Stretch Xform, Drag

Xform, StretchXform-Translate Xform, Translate

Translucent, Undo, Version, View Manager, Xform

Version 9 to X Function Map(Updated September 2010)Slide Number 2Slide Number 3Slide Number 4Slide Number 5Slide Number 6Slide Number 7Slide Number 8Slide Number 9Slide Number 10Slide Number 11Slide Number 12Slide Number 13Slide Number 14Slide Number 15Slide Number 16Slide Number 17Slide Number 18Slide Number 19Slide Number 20Slide Number 21Slide Number 22Slide Number 23Slide Number 24Slide Number 25Slide Number 26Slide Number 27Slide Number 28Slide Number 29Slide Number 30Slide Number 31