v3.2-12-2013 - nme.com.vn welding.pdf · salcf-020: flash card reader simp-02: printer paper for...
TRANSCRIPT
PO
WE
R S
O
S
V3.2-12-2013
POWER SOURCES
MADE IN FRANCE GLOBAL PROCESS www.axxair.com
PO
WE
R S
O
S
Power Sources
V3.2-12-2013
To run the complete welding process, all our power sources are fitted with a HIG colour touch screen ; The main functions are :
- Password protection
- Customized access according to the user : operator access to run the programs only, welder access to all customer functions, AXXAIR access for maintenance purposes.
- Auto compute mode for a quick set up according to the main welding
caracteristics : head type, tube diameter, tube thickness, welding mode, number of sectors, ...
- 200 welding programs, with 20 sectors, are stored on a Flash card
- Data acquisition : real welding data acquisition is made every second and recorded on the Flash card. 999 welding can be recorded on the card, before being overwritten if not downloaded on a PC.
- Axes synchronization : all the axes can be synchronized on the welding
current pulse, allowing : - Step mode : speed pulsed with the current to get a better penetration
while maintaining an effective control of the welding puddle. - Wire pulsed speed to feed the wire on the high level current and less
on low current. - The oscillation synchronization allows the adjustment of the high
current on the bevel by controlling the oscillation displacement time
- Parameters printing on the integrated printer ( SASL160 and SASL300 )
- Parameters printing on a PC through the Flash card
- Parameters control and alarm mode : safety mode for the heads in case of gaz absence or cooling failure. Alarms are recorded in order to check the integrity of a weld and remote access assistance.
MADE IN FRANCE GLOBAL PROCESS www.axxair.com
SA
SL
-16
0
PO
WE
R S
O
S
165A
-‐ 220V
V3.2-12-2013
Technical Specifications
- Orbital welding power source: 230V AC single- phase + earth, 50/60Hz , Imax=26A - Max. current 165 A - Power factor: 100 A, 100% - Ideal for on-site work - welding data acquisition system
•Supplied with a memory card with 200
programs, 20 levels each
Weight: - SASL-160TRA: 15 kg - SASL-160TF : 25 kg
SD Flash card with 200 programs per card
5.7" multi-language, colour touch screen
Integrated printer
References Accessories Consumables
SASL-160TRA : Air-cooled orbital welding TIG power source + board SATO80M/SC
SASL-160T : Water-cooled welding power source + board for SATF/SATO
SASL-160TF: Water-cooled welding power source + board for wire feed for SC/SAT
SACF-020: Memory card SALCF-020: memory card reade
SACW-C002: Coolant
SIMP-02: printer spool for SASL 160 / 300
MADE IN FRANCE GLOBAL PROCESS www.axxair.com
SA
SL
-16
1
PO
WE
R S
O
S
110A
-‐ 110V
V3.2-12-2013
Technical Specifications
- Orbital welding power source : 115V AC single-phase + earth, 50/60Hz , Imax=28A - Max. current 110 A - Power factor: 110 A, 100% - Ideal for on-site work - welding data acquisition system
•Supplied with a memory card with 200
programs, 20 levels each
Weight: - SASL-161TRA: 15 kg - SASL-161TF : 25 kg
SD Flash card with 200 programs per card
5.7" multi-language, colour touch screen
Integrated printer
References Accessories Consumables
SASL-161TRA : Air-cooled orbital welding TIG power source + board SATO80M/SC
SASL-161T : Water-cooled welding power source + board for SATF/SATO
SASL-161TF: Water-cooled welding power source + board for wire feed for SC/SAT
SACF-020: Memory card SALCF-020: memory card reade
SACW-C002: Coolant
SIMP-02: printer spool for SASL 160 / 300
MADE IN FRANCE GLOBAL PROCESS www.axxair.com
MADE IN FRANCE GLOBAL PROCESS www.axxair.com
SA
SL
-30
0
PO
WE
R S
O
S
300A -‐
400V
V3.2-12-2013
Technical Specifications
- Orbital welding power source, 400V +/15% 3 phases + Neutral + earth, 50/60Hz ,Imax = 24A - Integrated cooler: 1200 W cooling capacity with 1L/min
- Cooling safety system: flow rate, pressure - Max. current 300 A - Power factor: 210 A, 100% - Compatible with all AXXAIR heads
- Supplied with a memory card with 200 programs, 20 levels each
5.7" colour touch screen remote control. Secure, multi-lingual access
Drives up to 4 shafts, depending on Integrated printer the version: wire feed, AVC, OSC and wire
References Accessories Consumables
SASL-300E : Water-cooled welding power source for SC
SASL-300EF : Water-cooled welding power source + board wire feed for SC
SASL-300T : Water-cooled welding power source + board for SATF/SATO
SASL-300TF : Water-cooled welding power source + board wire feed for SC/SAT
SASL-300TOAF : Water-cooled welding power source + board AVC/OSC/WIRE for SC/SAT
SAGC-300: power source trolley
SACF-020: Memory card SALCF-020: memory card reader
SACW-C002: Coolant
SIMP-02: printer spool for SASL 160 / 300
MADE IN FRANCE GLOBAL PROCESS www.axxair.com
Accesso
ries
P
OW
ER
S
O
S
SADF2
SACW-Co02
V3.2-12-2013
SAGC-300
SIMP-02
SAGC-100
SALCF-020 SACF-020 SAGC-121
Accessories Accessories
SAGC-100 : trolley for SASL-160
SAGC-300 : trolley for SASL-300
SAGC-121 : closed head support 00 SADF2 : External Wire feeder
SACW-Co02: cooling fluid
SACF-020: flash card with software
SALCF-020: Flash card reader
SIMP-02: printer paper for SASL 160 / 300
MADE IN FRANCE GLOBAL PROCESS www.axxair.com
SATF
-40
ND
SATF
-65
ND
SATF
-11
5N
D
N N N
O O O
O O O
SATO
-80M
SATO
-11
5N
DA
SATO
-17
0N
DA
SATO
-22
0N
DA
O N N N
O O O O
O O O O
SATO
-11
5N
AO
A
SATO
-17
0N
AO
A
SATO
-22
0N
AO
A
SATP
-80
N N N N
N N N N
N N N N
N N N
O O O
O O O
O N N N
O O O O
O O O O
N N N N
N N N N
N N N N
N N N
N N N
O O O
O O O
O O O
N N N N
N N N N
O O O O
O O O O
O O O O
N N N N
N N N N
N N N N
N N N O
O O O O
Co
mp
ati
bil
ity
P
OW
ER
S
O
S
Compatibility table with heads and accessories
V3.2-12-2013
SC1
21
-A
SC1
21
-E
SC1
71
-A
SC1
71
-E
SC2
21
-E
SC3
21
-E
SOA
F (
Acc
.)
SASL-160TRA O N O N N N N
SASL-160T O O O O O O N
SASL-160TF O O O O O O N
SASL-161TRA O N O N N N N
SASL-161T O O O O O O N
SASL-161TF O O O O O O N
SASL-300E O O O O O O N
SASL-300EF O O O O O O N
SASL-300T O O O O O O N
SASL-300TF O O O O O O N
SASL-300TOAF O O O O O O O
SA
DF2
SA
GC
-10
0
SA
GC
-30
0
SASL-160TRA N O N
SASL-160T N O N
SASL-160TF O O N
SASL-161TRA N O N
SASL-161T N O N
SASL-161TF O O N
SASL-300E N N O
SASL-300EF O N O
SASL-300T N N O
SASL-300TF O N O
SASL-300TOAF O N O
INL
INE
WE
LD
ING
V3.2-12-2013
INLINE WELDING
MADE IN FRANCE GLOBAL PROCESS www.axxair.com
SA
TF
-40
ND
IN
LIN
E W
EL
DIN
G
ø0,25'' -‐ ø1,5''
ø6 -‐ ø40 mm
V3.2-12-2013
Technical Specifications - Water-cooled head - Dual-wing opening - Clamping jaws - stainless steel (1 kit per diameter) - Tungsten electrode specific to diameter - Motor with coder: allows for tungsten electrode start-up at all angles - High protection against start-up without tungsten electrode
Weight: 8.8 kg
Tool-free jaw fitting Remote control keypad Driven by AXXAIR power source ( cf compatibility table )
Adjustable spring- loaded system: to account for tube "out of round"
References Accessories Consumables
SATF-40ND SAFS-210 : Wire harness extension 10 M
SMN40-XX Clamping jaws Ø in mm
SCE16-XX : Ø 1,6 mm
SCE24-XX : Ø 2,4 mm
MADE IN FRANCE GLOBAL PROCESS www.axxair.com
SA
TF
-65
ND
IN
LIN
E W
EL
DIN
G
ø0,25'' -‐ ø2,5''
ø6 -‐ ø65 mm
V3.2-12-2013
Technical Specifications - Water-cooled head - Dual-wing opening - Clamping jaws - stainless steel (1 kit per diameter) - Tungsten electrode specific to diameter - Motor with coder: allows for tungsten electrode start-up at all angles - High protection against start-up without tungsten electrode
Weight: 9.2 kg
Tool-free jaw fitting Remote control keypad Driven by AXXAIR power source ( cf compatibility table )
Adjustable spring- loaded system: to account for tube "out of round"
References Accessories Consumables
SATF-65ND SAFS-210 : Wire harness extension 10 M
SMN65-XX Clamping jaws Ø in mm
SCE16-XX : Ø 1,6 mm
SCE24-XX : Ø 2,4 mm
MADE IN FRANCE GLOBAL PROCESS www.axxair.com
SA
TF
-11
5N
D
INL
INE
WE
LD
ING
ø1'' -‐ ø4,5''
ø25 -‐ ø115 mm
V3.2-12-2013
Technical Specifications - Water-cooled head - Dual-wing opening - Clamping jaws - stainless steel (1 kit per diameter) - Tungsten electrode specific to diameter - Motor with coder: allows for tungsten electrode start-up at all angles - High protection against start-up without tungsten electrode
Weight: 9.9 kg
Tool-free jaw fitting Remote control keypad Driven by AXXAIR power source ( cf compatibility table )
Adjustable spring- loaded system: to account for tube "out of round"
References Accessories Consumables
SATF-115ND SAFS-210 : Wire harness extension 10 M
SMN115-XX Clamping jaws Ø in mm
SCE16-XX : Ø 1,6 mm
SCE24-XX : Ø 2,4 mm
MADE IN FRANCE GLOBAL PROCESS www.axxair.com
V3.2-12-2013
MADE IN FRANCE GLOBAL PROCESS www.axxair.com
Accesso
ries
IN
LIN
E W
EL
DIN
G
SKIF-01 SMN40-xx SMN65-xx SMN115-xx
SKIB-01 SSED
Accessories Consumables Options
SAFS-210 : Wire harness extension 10 M
SKIB-01: gas protection kit - plugs Ø 6 to 41 mm 0 SKIF-01: gas protection kit - membranes Ø 40 to 120 mm
SMN40-XX Clamping jaws Ø in mm SMN65-XX Clamping jaws Ø in mm SMN115-XX Clamping jaws Ø in mm
SSED-16: offset tungsten electrode support Ø 1.6 mm offset range 4 to 7.5 mm SSED-24: offset tungsten electrode support Ø 1.6 mm offset range 4 to 7.5 mm
V3.2-12-2013
MADE IN FRANCE GLOBAL PROCESS www.axxair.com
Dim
ensio
ns
IN
LIN
E W
EL
DIN
G
A mm
B mm
C mm
Ø min
Ø max
SATF-40ND 316 124 40 6 mm 40 mm 8,8 kg < 70 dB
SATF-65ND 346 154 40 6 mm 65 mm 9,2 kg < 70 dB
SATF-115ND 401 218 40 25 mm 115 mm 9,9 kg < 70 dB
SA
TO
-80M
IN
LIN
E W
EL
DIN
G
ø0,4'' -‐ ø3'' ø10 -‐ ø80 mm
V3.2-12-2013
Technical Specifications
-‐ Air-‐cooled head -‐ Symmetrical pull-‐latch fastener clamping -‐ Motor with coder: allows for tungsten electrode start-‐up at all angles and a large range of diameters -‐ Axial tungsten electrode adjustment
Weight: 3 Kg (without harness)
Torch angle adjustment: welding under flange or short T angle
Quick diameter adjustment: symmetrical encircling clamping
Driven by AXXAIR power source ( cf compatibility table )
Mechanical profile guide:
constant arc voltage
References Accessories Consumables
SATO-‐80M SKIB-‐01: gas protection kit -‐ plugs Ø6 to 41 mm SKIF-‐01: gas protection kit -‐ membranes Ø40 to 120 mm
SCE16-‐50 : Ø 1,6 mm SCE24-‐50 : Ø 2,4 mm
MADE IN FRANCE GLOBAL PROCESS www.axxair.com
SA
TO
-115N
DA
IN
LIN
E W
EL
DIN
G
ø0,625'' -‐ ø4,5'' ø19 -‐ ø115 mm
V3.2-12-2013
Technical Specifications
-‐ Water-‐cooled head -‐ 200 A, 100%
-‐ Clamping jaws -‐ stainless steel -‐ Motor with coder: allows for tungsten electrode start-‐up at all angles and a wide range of diameters -‐ Axial adjusting screw
Weight: 7.5 kg
Torch angle adjustment: welding under flange or short T angle
Quick diameter adjustment: powerful symmetrical clamping
Driven by AXXAIR power source ( cf compatibility table )
Mechanical profile guide: constant arc voltage
References Accessories Consumables
SAFS-‐210 : Wire harness extension 10 M Except with AVC/OSC/ WIRE
SATO-‐115NDA
SKIB-‐01: gas protection kit -‐ plugs Ø6 to 41 mm SKIF-‐01: gas protection kit -‐ membranes Ø40 to 120 mm SADFP-‐01: wire guide for open heads SKTO-‐03 : Exchange kit for open head torch diam 1.6 and 2.4mm
SCE16-‐50 : Ø 1,6 mm SCE24-‐50 : Ø 2,4 mm
MADE IN FRANCE GLOBAL PROCESS www.axxair.com
SA
TO
-170N
DA
IN
LIN
E W
EL
DIN
G
ø1'' -‐ ø6,625'' ø25 -‐ ø170 mm
V3.2-12-2013
Technical Specifications
Water-‐cooled head -‐ 200 A, 100% -‐ Clamping jaws -‐ stainless steel -‐ Motor with coder: allows for tungsten electrode start-‐up at all angles and a wide range of diameters -‐ Axial adjusting screw
Weight: 9 kg
Torch angle adjustment: welding under flange or short T angle
Quick diameter adjustment: powerful symmetrical clamping
Driven by AXXAIR power source ( cf compatibility table )
Mechanical profile guide: constant arc voltage
References Accessories Consumables
SAFS-‐210 : Wire harness extension 10 M Except with AVC/OSC/ WIRE
SATO-‐170NDA
SKIB-‐01: gas protection kit -‐ plugs Ø6 to 41 mm SKIF-‐01: gas protection kit -‐ membranes Ø40 to 120 mm SADFP-‐01: wire guide for open heads SKTO-‐03 : Exchange kit for open head torch diam 1.6 and 2.4mm
SCE16-‐50 : Ø 1,6 mm SCE24-‐50 : Ø 2,4 mm
MADE IN FRANCE GLOBAL PROCESS www.axxair.com
SA
TO
-220N
DA
IN
LIN
E W
EL
DIN
G
ø1,5'' -‐ ø8,625'' ø38 -‐ ø220 mm
V3.2-12-2013
Technical Specifications
•Water-‐cooled head • 200 A, 100% • Clamping jaws -‐ stainless steel • Motor with coder: allows for tungsten electrode start-‐up at all angles and a wide range of diameters •Axial adjusting screw
Weight: 11 kg
Torch angle adjustment: welding under flange or short T angle
Quick diameter adjustment: powerful symmetrical clamping
Driven by AXXAIR power source ( cf compatibility table )
Mechanical profile guide: constant arc voltage
References Accessories Consumables
SAFS-‐210 : Wire harness extension 10 M Except with AVC/OSC/ WIRE
SATO-‐220NDA
SKIB-‐01: gas protection kit -‐ plugs Ø6 to 41 mm SKIF-‐01: gas protection kit -‐ membranes Ø40 to 120 mm SADFP-‐01: wire guide for open heads SKTO-‐03 : Exchange kit for open head torch diam 1.6 and 2.4mm
SCE16-‐50 : Ø 1,6 mm SCE24-‐50 : Ø 2,4 mm
MADE IN FRANCE GLOBAL PROCESS www.axxair.com
SA
TO
-115N
AO
A
INL
INE
WE
LD
ING
ø0,625'' -‐ ø4,5'' ø19 -‐ ø115 mm
V3.2-12-2013
Technical Specifications
-‐ Water cooled head -‐ 200A, 100% -‐ Thick tube multiple pass welding -‐ Fitted with AVC/OSC module -‐ Axes controlled by encoder -‐ Oscillation range: 20 mm -‐ AVC range: 20 mm -‐ Three-‐dimensional adjustment for welding wire -‐ Axial adjusting screw
Weight : 8,8 kg
Oscillation range: 20 mm
AVC range: 20 mm V max : 15mm/s
Quick diameter adjustment: symmetrical encircling clamping
Driven by AXXAIR power source ( cf compatibility table )
SAOF module compatible with prefab machines
References Accessories Consumables
SATO-‐115NAOA SKIB-‐01: gas protection kit -‐ plugs Ø6 to 41 mm SKIF-‐01: gas protection kit -‐ membranes Ø40 to 120 mm
SCE16-‐50 : Ø 1,6 mm SCE24-‐50 : Ø 2,4 mm
MADE IN FRANCE GLOBAL PROCESS www.axxair.com
SA
TO
-170N
AO
A
INL
INE
WE
LD
ING
ø1'' -‐ ø6,625'' ø25 -‐ ø170 mm
V3.2-12-2013
Technical Specifications
-‐ Water cooled head -‐ 200A, 100% -‐ Thick tube multiple pass welding -‐ Fitted with AVC/OSC module -‐ Axes controlled by encoder -‐ Oscillation range: 20 mm -‐ AVC range: 20 mm -‐ Three-‐dimensional adjustment for welding wire -‐ Axial adjusting screw
Weight : 10 kg
Oscillation range: 20 mm
AVC range: 20 mm V max : 15mm/s
Quick diameter adjustment: symmetrical encircling clamping
Driven by AXXAIR power source ( cf compatibility table )
SAOF module compatible with prefab machines
References Accessories Consumables
SATO-‐170NAOA SKIB-‐01: gas protection kit -‐ plugs Ø6 to 41 mm SKIF-‐01: gas protection kit -‐ membranes Ø40 to 120 mm
SCE16-‐50 : Ø 1,6 mm SCE24-‐50 : Ø 2,4 mm
MADE IN FRANCE GLOBAL PROCESS www.axxair.com
SA
TO
-220N
AO
A
INL
INE
WE
LD
ING
ø1,5'' to ø8,625'' ø38 -‐ ø220 mm
V3.2-12-2013
Technical Specifications
-‐ Water cooled head -‐ 200A, 100% -‐ Thick tube multiple pass welding -‐ Fitted with AVC/OSC module -‐ Axes controlled by encoder -‐ Oscillation range: 20 mm -‐ AVC range: 20 mm -‐ Three-‐dimensional adjustment for welding wire -‐ Axial adjusting screw
Weight : 13 kg
Oscillation range: 20 mm
AVC range: 20 mm V max : 15mm/s
Quick diameter adjustment: symmetrical encircling clamping
Driven by AXXAIR power source ( cf compatibility table )
SAOF module compatible with prefab machines
References Accessories Consumables
SATO-‐220NAOA SKIB-‐01: gas protection kit -‐ plugs Ø6 to 41 mm SKIF-‐01: gas protection kit -‐ membranes Ø40 to 120 mm
SCE16-‐50 : Ø 1,6 mm SCE24-‐50 : Ø 2,4 mm
MADE IN FRANCE GLOBAL PROCESS www.axxair.com
V3.2-12-2013
MADE IN FRANCE GLOBAL PROCESS www.axxair.com
Accesso
ries
IN
LIN
E W
EL
DIN
G
SKIF-01 SADF2
SKIB-01 SADFP-01
Accessories Options
SKIB-01: gas protection kit - plugs Ø 6 to 41 mm 0 SKIF-01: gas protection kit - membranes Ø 40 to 120 mm
SAFS-210 : Wire harness extension 10 M Except with AVC/OSC/ WIRE
SKTO-03 : Exchange kit for open head torch diam 1.6 and 2.4mm
SADF-2: wire feeder for SC and SATO (without wire spool)
SADFP-01: wire guide for open heads
V3.2-12-2013
MADE IN FRANCE GLOBAL PROCESS www.axxair.com
Dim
ensio
ns
IN
LIN
E W
EL
DIN
G
A
mm B
mm C
mm
D mm
E mm
F mm
Ø min
Ø max
SATO
-
80M
233
216
150
100
40 44
210
10
mm
80
mm
3 kg
<70dB
A
mm B
mm C
mm
D mm
Ø min
Ø max
SATO-115NDA
309
262
160
10 19 mm
115 mm
7,5 kg
<70dB
SATO-170NDA
349
321
160
10 25 mm
170 mm
9 kg
<70dB
SATO-220NDA
390
350
184
10 38 Mm
220 mm
11 kg
<70dB
V3.2-12-2013
MADE IN FRANCE GLOBAL PROCESS www.axxair.com
Dim
ensio
ns
IN
LIN
E W
EL
DIN
G
A
mm B
mm C
mm
Ø D
max
Ø min
Ø max
SATO -
115NAOA
309
262
194—219
680 mm
19
mm
115 mm
8.8 kg
<70dB
SATO
-
170NAOA
349
321
194—219
750 mm
25
mm
170 mm
10 kg
<70dB
SATO- 220NAOA
389
350
219—244
800 mm
38 mm
220 mm
13 kg
<70dB